Tips on how to clean the dishwasher from grease. Tips on how to clean your dishwasher from grease Cleaning a bosch dishwasher

The dishwasher is one of the main household helpers. Every day, facilitating routine work in the kitchen and washing mountains of dishes, she needs care and attention. Despite the fact that the device constantly works with water and detergent, grease, food debris, debris, and plaque get stuck and accumulate in the cavities, on the walls.

How often to clean?

The more often you use the equipment, the more regular maintenance should be. It is recommended to clean every 10-15 days, and if you do not turn it on daily, then focus on 10 starts.

Do not wait until an unpleasant odor occurs and bacteria begin to multiply. This is the risk that the equipment will quickly become unusable, and a threat to the health of your family.

Proper, gentle handling will prolong the life of your cookware and ensure that you are using clean cookware.


Features of care and cleaning

There are a number of simple and affordable actions that will make life easier for you and your assistant:

  • Ventilate the machine if possible - high humidity inside leads to an unpleasant odor.
  • Wiping the inside with a regular absorbent cloth or sponge will also help get rid of excess moisture.
  • When the machine has gone through the wet cleaning cycle, go over the interior with a dry cloth.
  • Don't forget to clean the rubber bands on the door.
  • Keep an eye on hard-to-reach corners from time to time.
  • Fat that gets on the inner surface is recommended to be cleaned regularly - the old fatty film is difficult to wash off.
  • Follow the basic loading rules. Remove food residues from dishes before placing them in the machine.
  • If possible, do not skimp on detergents, salt and rinse aid.


Cleaning rules

During operation, knowledge of various methods and means of cleaning can be useful. Below we will talk about how to clean the dishwasher from various types of dirt: grease, scale, food debris. The first and extremely important rule - before you start manipulation, we need to make sure that we unplug the cord from the outlet and de-energize the equipment.

The second rule is regularity and careful approach. We take care of the equipment on time, and then we will not have to look for topics of repair, calling a master and using specialized tools. Cleaning a dishwasher at home will take a reasonable amount of time and money.

By experience or by reading reviews on the forums, you can choose a tool that will suit you. in terms of price-quality ratio.

The standard scheme of application is as follows: place the product in the way indicated on the label in the machine. Next, start the program at +60 degrees without dishes. The basic cleaning of the camera was successful.


Household chemicals

Here is a list of the most popular products, but in stores you can find much more options:

  • Calgonit Fusion Power Finish (liquid);
  • Finish Rinse (liquid);
  • UniPlus (liquid);
  • Paclan Brileo;
  • Claro;
  • Frosch Soda;
  • Rinnova Lavastoviglie (liquid).

How to use each remedy is indicated in the instructions.


Folk remedies

Among folk methods, those always present on the shelf have gained popularity. soda, vinegar, lemon. These resources will be discussed further.

Soda

It is necessary to pour into the pan, run for a short cycle at maximum temperature. Kills odors, removes old stains.


Vinegar

It is better to take a white table 9% solution. Fill a bowl with vinegar and place in the top basket. Turn on the device at maximum power. After work, leave the door open so that the smell disappears.


Lemon acid

Traditionally, it is used to remove scale.

Pour 300 g of acid into the machine and run at full power.

After cleaning with special tools, walk manually along the inner surface of the chamber, baskets and remove any remaining dirt. It will be easy to carry out these manipulations - the detergent softened the dirt.


How to get rid of leftover food?

The machine is able to wash any dishes in any volume to a shine, but food remains will always remain in the chamber. You need to check and remove them from all elements:

  • All over the inner surface of the chamber, on the walls.
  • In hard-to-reach places.
  • On rubber bands.
  • Along the perimeter of the adjoining door.
  • On baskets.
  • From the filter.

Dishwasher trays are best cleaned by hand. They need to be taken out and cleaned using any detergent. If the pollution is significant or does not go away, we carry it into the basin, soak it in foam and let it soak. Further, the process is easy, rinse with water and dry with a woven cloth.

The inside of the working chamber can simply be cleaned with a damp sponge and any dish detergent, preferably with a good fat-dissolving effect. For these cases, tools like Morning fresh, it acts on deposits lethally. It usually takes 5-10 minutes, in especially advanced cases, leave it for 20 minutes, turn the sponge over with a hard side or use a brush with non-metal bristles and wash off the soaked residues of grease and dirt.

Do not forget about the sealing material, the sides of the door - here they go unnoticed and fat stains and food particles accumulate in a hard-to-remove layer. For cleaning the dishwasher, it is preferable to choose liquid-based products, powders contain abrasive particles and can scratch surfaces.

At least once a month we pay attention to cleaning the filter. We often forget about it - it is in it that odors can arise, since a large amount of dirt settles. At this stage, the cleaning can be considered complete, if there is time, you can start the cycle with a special cleanser.


How to get rid of fat?

Next, we will share options for cleaning from fatty deposits. Such pollution is washed off with difficulty and adds work to the housewives. Fat deposits, as a rule, accumulate on the rotating blades, in the ceiling area, on the baskets and around the perimeter of the rubber bands.

Above, we talked about basic home cleaning. If it and special products are not effective, we recommend cleaning by hand, armed with dish or cleaning detergent, hot water, sponges and an old toothbrush.

Fat removal methods:

  • Based on the properties of soda and vinegar to react, during which not only fat is removed, but also other contaminants. We apply soda on the surface inside the machine so that it does not crumble, you can slightly moisten it with water. We put a container with vinegar on the bottom, we start an intensive washing mode at maximum temperature.
  • As a home remedy, it is also recommended to use borax instead of soda. The principle is the same - apply inside and run the maximum mode.
  • Another "folk" recipe looks like this: add essential oil to soda, for example, eucalyptus, lemon or sage (in proportion to 2 cups of soda, 0.5 teaspoons of oil). Add 40 grams of hydrogen peroxide powder. We place the mixture at the bottom of the machine, in the upper part we put a couple of glasses of 9% vinegar.

If you are not an alchemist at heart and not an experimenter, there is a sufficient selection of special products for cleaning dishwashers from grease.


As a final step for control, go over the rocker arms, for example, with a toothpick. After all the procedures, you can be sure that you managed to clean the dishwasher from grease as much as possible. These products will also help to wash the filter from blockage.

Cleaning your dishwasher is easy.

Descaling

Hard water is not uncommon in our apartments, therefore, to soften it, it is recommended to add special salt when washing. But we do this not all and not regularly, without thinking that the scale covering the heating element worsens its properties and efficiency. The consumption of electricity increases, kitchen utensils are washed worse.

You can clean the dishwasher from scale using the following means:

  • Special preparations that are on sale in the departments of household chemicals.
  • Antinakipin is a remedy that can be bought at any store. Different brands have variations depending on the device. We take for dishwashers, pour on the bottom, run.
  • Table vinegar - pour a few glasses directly into the machine, run to the maximum. We already wrote about citric acid above, use it like vinegar. After use, you can additionally run a short cycle to eliminate acid residues.


How do I get my dishwasher smelling fresh again?

After cleaning the machine with the above methods, you can start another cleaning cycle, which will help remove unpleasant odors:

  • We soak the filter in a soapy solution, after removing it from the machine. We wash, we put in place.
  • Next, pour 1 glass of vinegar into the tray and start the full washing cycle without dishes.
  • Pour 2-3 cups of soda on the bottom of the unit, leave for 3-4 hours, you can overnight.
  • Let's start another final cycle.

Caring for a dishwasher is not difficult at all and a matter of habit. In return for the fact that you will regularly clean the dishwasher, the appliances will delight you for many years with their quality work.


For some other dishwasher cleaning products, see the following video.

In order for the dishwasher to properly cope with its duties, it is necessary not only to follow the operating rules, but also to regularly care for the equipment. Otherwise, you may encounter such troubles as the smell of mustiness, fatty deposits, mold. And in especially neglected cases - and with a breakdown of the equipment itself.

You will learn everything about how to clean the dishwasher at home and extend its service life from the article we have proposed. We have described in detail the methods and steps for caring for a dishwasher, listed the tools that have been proven in practice. Given our advice, you will eliminate any problems in the operation of the machine.

Although many modern models of dishwashers have a self-cleaning function, this does not save you from the need to periodically rinse the filters and other elements of the machine.

And even professional appliance care products may not be enough when it comes to blockages or operation with hard water. Therefore, the key to the flawless operation of the dishwasher is comprehensive and timely care.

Flushing the drain and inlet filter

There is a multilayer filter on the drain of any dishwasher, the task of which is to prevent clogging of the drain with pieces of food and other debris.

But even if you diligently follow the manufacturer's recommendations and wipe the dishes with napkins before each load to remove food residue, grease or hard water deposits may cause the appliance to stop before it has completed a full load.

You need to clean the filter at least 1-2 times a week, since the fine mesh can become clogged even with insoluble particles of washing powder or salts, and then the machine will display a drain operation error

To get to the filter, we act like this:

  • We turn off the dishwasher.
  • We take out the lower basket, collect the remaining water at the bottom of the device with a sponge.
  • In the lower part of the housing, next to the sprinkler, we find a round recess - it houses the filter, which consists of a metal membrane for fine cleaning, a plastic cup with large holes and an internal mesh.
  • In new dishwashers, easy removal is provided for this element - just pull it up or unscrew it counterclockwise. But in models older than 7-10 years, you may need a screwdriver, pliers and other improvised tools from the arsenal of a home master.
  • From the very hole under the filter, you need to remove the water with a sponge and inspect the niche for contaminants - if any solid waste particles get through the filter protection, they can damage or break the pump.
  • To make sure that the pump impeller is working, you can unscrew the self-tapping screw with a screwdriver, remove the protective bar and carefully turn the blades. If they rotate easily and no foreign objects are found, you can collect them back. Otherwise, you will have to disassemble the pump design.
  • Then all parts are cleaned of accumulations of debris and washed with warm water with any fat-dissolving agent. If the filter has not been cleaned for a long time, the mesh cells are very clogged or the glass is covered with scale, you can soak these elements for a couple of hours in a solution of vinegar, citric acid or sprinkle with dishwasher detergent.

Although the outlet filter is the most popular place for blockages to accumulate, it does not hurt to check the condition of the intake hose during a comprehensive mechanical cleaning of the dishwasher. Accumulations of sand, rust particles and salts can be found here.

To get to the inlet filter, you need to turn off the water and unscrew the supply hose - a fine-mesh membrane will be visible inside

To clean the dishwasher bay, disconnect the inlet hose (and rinse it at the same time). There should be two filters inside: immediately behind the tee tap and at the entrance to the device itself.

Both meshes are removed and washed with warm water. If they are damaged or heavily clogged, they can be replaced with new ones - such consumables are inexpensive. After checking, all filters are assembled in the reverse order.

Checking the condition and cleaning of sprinklers

Another problematic element that can disable is the spray system. Although the water from the hose is already cleaned of large inclusions, fine particles of sand and calcium salts easily pass through the cells of the inlet filter.

In addition, water with high hardness can damage the rubber seals on rotating rocker arms, so it is advisable to inspect their condition at least once a month.

To clean clogged impeller nozzles, you can use toothbrushes, pieces of thin wire or ordinary toothpicks, you just need to be careful not to push dirt deep into the hole

The principle of cleaning sprayers:

  • Take out the upper basket with the rocker attached to it.
  • Bend the latches and remove the sprinkler blades.
  • Remove the lower basket and remove the lower rocker - usually just turn the rocker counterclockwise and pull up, holding the part in the middle.
  • Inspect the condition of the seals (replace if necessary).
  • Rinse the blades under running water, clean the nozzles and connecting nodes.
  • Reassemble the system and make sure that the sprinklers rotate without interference and effort.

The fasteners of the rocker arms for different models may differ, so it is worth checking the instructions before the first cleaning so as not to accidentally break the latches.

How to clean the nozzles on the Hansa dishwasher sprayers, the video will demonstrate:

Cleaning the body and seals

It is recommended to wipe the inner walls, baskets and elastic on the appliance door dry after each start. But it does not hurt to periodically disinfect these areas with a special tool that is approved for use in dishwashers.

Particular attention should be paid to the joints and the area on the bottom of the door - they are almost not washed with water during washing, so food debris quickly accumulates here and begins to decompose.

If you do not wipe the internal elements of the device from moisture and do not ventilate its box, the smell of dampness or mold may settle inside

It is enough to wipe a not very dirty seal with a soft cloth soaked in a cleaning solution, and in advanced cases, you can help yourself with a toothbrush. But it is undesirable to spray the product or wash the door with a wet sponge so that the liquid does not get on the electrical wiring or in the lock.

Many housewives use home remedies to clean household appliances, for example, the same lemon powder or vinegar. But in the case of seals, such savings are very doubtful - the gum can harden or dry out under the influence of acid, and the machine will begin to leak during operation.

After completing the program, you need to open the tablet / powder compartment, rinse it from detergents, wipe it or leave it open until completely dry

Baskets with dried food residues can first be soaked in warm water for a couple of hours, then washed in soapy water with a stiff non-metal brush. However, the self-cleaning function, if it is provided in the device, does a good job with this task. Before installing inside the box, all elements must be washed with clean running water and wiped dry.

Elimination of grease, mold and scale

If you notice that an unpleasant smell has appeared on the dishes or the inner walls of the appliance, or an unpleasant smell has begun to come from the box, you need to urgently start cleaning the machine.

And the best helpers here will be ready-made solutions made by machine manufacturers. Improvised means will also come in handy, which are sure to be found in the kitchen of any housewife.

The use of ready-made chemicals

In order to wash the dishwasher and its internal elements that are inaccessible to simple mechanical cleaning, it is recommended to run the appliance on any long cycle at a high temperature with the addition of.

But if you notice yellow or rusty spots on the internal surfaces of the dishwasher, the high iron content in the water may also be the cause. In this case, you will have to install a special filter on the inlet hose.

Fresh stains can be removed with a rag soaked in a stainless steel cleaner, but old rust after washing is best treated with an anti-corrosion coating.

Bottled Finish is a universal dishwasher cleaner that is placed neck down in an empty tray, and the machine starts up for a full cycle at a temperature of 65 degrees

The most popular chemicals for disinfection and descaling:

  • Finish Machine Cleaner- under the influence of hot water, the membrane on the neck of the bottle dissolves, and the product actively cleans all accessible surfaces from grease, scale and unpleasant odors.
  • Antinakipin- degreasing powder for removing lime deposits and scale on the internal elements of the machine.
  • FILTERO- liquid for preventive cleaning of dishwashers from grease and scale.
  • ELECTROLUX- liquid detergent for removing body fat and small food debris, as well as anti-scale powder and fragrance.

These drugs work on a similar principle - they are placed in an empty dishwasher, then the device is turned on for 45-90 minutes at high temperature. After that, it is recommended to start rinsing empty again, already for a short cycle, in order to ensure that all chemical residues are removed, and wipe the surfaces dry with a soft cloth.

A clear example of the excellent work of a professional product is the interior of a dishwasher before and after cleaning with Finish Machine Cleaner

In addition, you can use specialized sprays and liquids recommended for cleaning and polishing the stainless walls of the dishwasher, and to combat unpleasant odors - flavors that are hung on the baskets of the appliance and can be used for several cycles.

But manufacturers do not recommend adding dishwashing liquid for preventive washing and degreasing the surface.

The fact is that increased foaming can damage the internal elements of the device, and attempts to save money will end in repairs. Therefore, it is possible and necessary to manually wipe the surfaces in a soapy solution, but you should not start the machine with the addition of a foaming liquid.

Purchased alternative

Professional preparations are good for their balanced composition and complex action on the three most common problems of machines - scale, smell and fatty deposits. But if you are looking for a way to quickly clean the dishwasher and save money at the same time, we offer several recipes from inexpensive but effective ingredients.

Soda, vinegar and lemon acid are the most famous helpers of housewives in the fight against limescale, rust stains and grease.

To clean the machine, and at the same time drain from body fat, you need to pour 1.5-2 cups of vinegar into a cup or plate. Then they should be placed in the upper tray, pour soda on the bottom and start any long mode.

And as soon as the water heats up, press pause and leave the device for at least 30 minutes (but better at night). During this time, various dried debris and plaque will soften and be easily removed along with dirty water.

Another universal remedy that will help remove traces of scale is citric acid. Its consumption depends on the displacement of the car and the degree of contamination, but on average it will take about 150-200 grams. It also works at high temperatures, and for the best effect - with a forced shutdown of the device from 30 minutes to several hours.

Although lemon powder is really good at removing scale and cleaning the nozzles in the powder flask, this method of cleaning is very controversial, since concentrated acid can damage the seals of the device.

There is also a more gentle way - prepare a solution from water and vinegar or lemon powder, pour it into any spray bottle and use it to manually clean the inside walls of the box and other scaled surfaces. In this case, you need to spray the product carefully and make sure that it does not get on the rubber elements, as well as on the skin.

You can make 2-in-1 tablets from soda, which will not only help clean the car of grease and dirt, but also freshen the air with a pleasant aroma.

Cooking method:

  1. Pour 10-15 drops of any essential oil and 1-2 tablespoons of hydrogen peroxide into a glass of powdered soda.
  2. Mix everything with a spatula - the mixture should become like wet sand.
  3. Use a spoon or ice cream scoop to scoop into small balls.
  4. Arrange the prepared tablets at the bottom of the device.
  5. Run the dishwasher for a long cycle.

But in order to reduce the amount of work during general cleaning, we recommend taking note of a few simple tips for regular maintenance and operation:

  1. Place the dishes in the trays according to the manufacturer's layout. However, they are the same for all appliances - frying pans, pots, baking sheets with soot and other heavily soiled or large dishes are always placed at the bottom - washing is more active there. And glasses, cups and deep plates must be turned upside down so that there are no powder residues and water left in them.
  2. Before loading, wipe the dishes from large debris with a regular cloth.
  3. Use in addition to detergent powder or tablets that already contain softener.
  4. After each cycle, remove the coarse filter mesh and remove accumulated debris.
  5. Check the compartment for any powder or pieces of tablets left in it.

Use only non-metallic objects and soft cloths for cleaning - tough fibers can damage the protective coating of the box or baskets and give the green light to rust.

The video will introduce you to the features of cleaning the dishwasher with home remedies and the cooking method:

To avoid a musty smell, always wipe the internal parts after each start-up with a dry cloth and ventilate the appliance until the condensation has evaporated.

And the last tip - use the dishwasher at least 3-4 times a week. Paradoxically, the longer the appliance is left out of service, the shorter its life will be, since such downtime is more likely to cause problems with blockages, limestone and unpleasant odors.

Conclusions and useful video on the topic

In order to visualize the scope of the upcoming cleaning, especially the extraction and cleaning of the internal elements of the dishwasher, we suggest that you familiarize yourself with a small selection of video tips from home craftsmen and experienced housewives.

Regular care and preventive washing of dishwasher systems:

As you can see, there is nothing complicated in caring for dishwashers. But if the machine is not pampered with regular cleaning, its sparkling walls will quickly become covered with a bloom.

Food debris will clog filters and spray nozzles, fungus will settle in the seal, and key parts will fail and require replacement. Do not forget about your assistant or entrust her prevention to cleaning specialists.

The main, so to speak, "home" set of procedures consists of 7 stages, which are quite easy to do on your own. Some of them need to be repeated regularly, and some - depending on the degree of contamination of the equipment.

The filtration system, consisting of a mesh filter, is cleaned at least once every 7 days. Over a longer time, the filter cells will become completely clogged with grease, which will increase the unpleasant odor and leaks may occur.

To remove it, you need to pull out the lower basket and disassemble it. After that, it can be washed with ordinary tap water and detergent.

The impeller and rocker are quite dirty during the machine's work cycles, so they also need to be pulled out and washed. Holes that are cleaned with a regular toothpick are also subject to cleaning.

Important! If, after assembly, the blades of the dishwasher do not rotate well, then you need to disassemble everything again and descale the axis.

The seal on the dishwasher door also requires cleaning, but approximately once every six months. For effective cleaning, you should use a regular toothbrush and a special detergent recommended by the manufacturer.

The lower part of the dishwasher door is such an “island” in the overall system of equipment: water does not enter this part, but various wastes perfectly accumulate, so cleaning it is no less important than other parts.

It is also important to wash the baskets where the dishes fit well. To do this, you can use a medium-sized brush and a regular detergent.

Info! Ideally, you should wash all of these parts daily to avoid the appearance of heavy and dense contamination, as well as the formation of mold and corrosion.

How to deal with difficult pollution?

Contaminants such as mold, old grease and rust are not washed off with ordinary detergent or powder, so you will have to resort to more powerful means.

Bleach is the best way to remove mildew, but be aware that it is not safe, especially for elements made of stainless steel. Therefore, in order to avoid mold, you should regularly ventilate the machine by opening the door for a while, during which all parts will have time to dry well.

Rust is removed with a special tool. However, removing it is one thing, but preventing further corrosion is another. To do this, you need to figure out why the parts rust. The cause may be peeling paint on wash baskets or tap water from rusty pipes that contains too much iron in its composition. In the first case, it will be enough to use a sealant and restore the coating, and in the second - to put a good filter.

The enemy of all dishwashers is scale

Scale is removed using special products that need to be poured / poured into the machine and run for a short washing cycle or vice versa - the longest with the maximum water heating temperature. The selected mode will depend on the type of tool being used. In this case, of course, nothing should be in the car.

Advice! The surest way to clean the machine from scale is to prevent its formation, for this you need to regularly use salt that softens the water.

The most effective tool is the Finish cleaner - it washes all machine parts well and is safe for stainless steel. But besides it, there are other, no less effective means: cleaning fluid from HG, Amway, Topper and Somat.

In addition to professional means, there are also folk ones. One of the most popular is a mixture of vinegar and baking soda: pour 5% vinegar into a glass and pour ¼ cup of soda into it and put it on a shelf designed for mugs. Then you can start the technique in normal mode.

Another proven remedy is borax or sodium borate. With its help, you can easily and simply wash all parts of the dishwasher and get rid of the unpleasant odor. If you sometimes add borax to your detergent, you can protect the machine from stains and food debris.

And how to clean the dishwasher with citric acid and is it possible? - Yes, citric acid is indeed a very effective remedy, but in fact it can ruin gaskets, so baking soda or a special cleaning agent is preferred to it.

Drying

After all parts are cleaned, you need to finally wipe the machine chamber and leave to dry.

Cleaning the dishwasher at home: video

A dishwasher, like any other household appliance, needs care. Moreover, it must be washed regularly, otherwise it will not be able to do its job well. Even if you put only clean dishes without large food residues in the compartments, sooner or later debris accumulates inside the chamber, on the door and on the spray arm. In addition, mold can appear from constant moisture in the dishwasher, and this is no good at all.

Regular care

After each cycle, it is desirable to remove not only the dishes from the machine, but also the accumulated debris. Large crumbs, parts of broken plates and cups, labels torn off containers - all this and much more accumulates at the bottom and can ruin the dishwasher. Also, after dry cleaning, it is necessary to wash the door and the bottom of the chamber.

About once a month, the machine needs more thorough care:

  1. Remove all shelves and compartments from the chamber - they must be washed separately in a sink with detergent. To help remove dirt faster, soak them in warm water with baking soda or vinegar.
  2. Thoroughly wipe the dishwasher from the inside. Pay special attention to the walls, bottom and door.
  3. The drain hole and water supply pipes also need to be looked after. Look, they are not clogged with garbage. It is best to wash them with a toothbrush: soft bristles will remove everything unnecessary from the cracks.
  4. Remove the dishwasher filter and wash it under running water.
  5. It is also necessary to clean the sprinkler regularly. Wash it from plaque and check whether the holes pass water well. Try to clean clogged compartments with a toothpick.
  6. Return all parts to the dishwasher. Place a glass of vinegar on the bottom shelf, and a plate with half a glass of baking soda on the top shelf. Turn on the intensive wash mode and let the machine clean itself.
  7. After turning off, open the machine and let the chamber air out well.

With regular maintenance, your dishwasher will be able to wash dirty dishes much better. However, keep in mind that it is also necessary to take care of the heating element, because the high temperature during washing can lead to the formation of scale. To prevent this from happening, try to run an intensive wash cycle with citric acid once a month. To do this, pour it into the dishwasher instead of detergent and turn on the desired program. Of course, there should be no dishes inside.

How to remove the bottom of a dishwasher

If the machine began to wash dishes worse and at the same time an unpleasant smell appeared inside, it is quite possible that too much debris has accumulated under the bottom. It is necessary to carefully remove the bottom inside the chamber and thoroughly wash all parts of the device.

Removing the bottom of the dishwasher

  • pull the plug out of the socket;
  • carefully unscrew the screws and lift the filter cover;
  • seal the inlet of the filter with tape so that new debris does not get into it;
  • remove all solid debris with a dry cloth;
  • wet the sponge with detergent and wash the bottom of the machine;
  • if there are dried-on pieces of food, soak them first, and then carefully brush them off;
  • to get rid of mold and bad smell, you can use vinegar (don't forget the gloves!);
  • peel off the tape and put everything in place;
  • fasten the screws.

Important: if you are afraid that you will not be able to assemble the machine back, it is better to take pictures or record the entire process of unscrewing and removing parts. So you won't forget anything.

washing the car outside

The dishwasher needs to be washed not only inside, but also outside. To do this, wipe it regularly with a soft sponge dipped in a mild detergent solution. Take special care of the handle and control box - these are the parts that are usually the dirtiest. Also, a lot of debris and grease accumulates in the gap between the panels.

Remember: if you wash your typewriter regularly, it will certainly please you with excellent work. And her work is your rest!

In this article, we will learn how to clean the dishwasher at home from grease and scale.

If the unit itself is unkempt, dirty, the dishes will not shine. Cleaning the dishwasher (PMM) is easy. The main thing is not to forget to do it regularly.

Easy to clean dishwasher

We clean from fat

How often to wash the PMM depends on how carefully you remove food debris from the dishes, how much fat remains on it, and also on the quality of the water. Therefore, there are no specific recommendations regarding how many cycles the unit should be washed. In one family, PMM needs one or another cleaning after 5 washes, in another - after 15. Looking into the car, each housewife will immediately determine whether it is time to wash it or not. If the surface inside is dull, there are signs of plaque, dirt has accumulated below, or an unpleasant smell is felt, it's time. Sometimes it is enough to take out the lower mesh and wipe the walls, the bottom, which is always more dirty, and the area around the drain hole with a cloth soaked in detergent.

During operation, the edges of the door and the area under it are not washed, so the dirt stagnates there. Treat these places with a solution or 5% vinegar. The corners can be reached with a small brush.

How often to wash the PMM depends on how carefully you remove food debris from the dishes, how much fat remains on it, and also on the quality of the water.

For a more thorough cleaning of fat, you must do the following:

  • disconnect the machine from the mains;
  • pull out both nets and cutlery basket;
  • remove the filter, wipe it;
  • wipe the blades, axle;
  • clean the holes through which water is supplied.