Tiled wall in the bathroom. Wall decoration in the bathroom: old and new materials. Small bathroom decor. Plumbing

Thanks to the variety of finishing materials, now you can realize any design idea in your apartment. When it comes to renovating a bathroom, the question arises, what materials to use for its walls? There are many options. It can be ceramic tiles, mosaics, PVC panels, paint, porcelain tiles or even wallpaper. The choice depends only on financial capabilities and the intended design. Many interesting interior ideas with photos can be found on the Internet or come up with your own.

Material selection

The bathroom is a room with a high level of humidity. Therefore, it is worth paying special attention to the choice of finishing materials. They must be resistant to moisture, fumes, some salts, as well as household chemicals. In addition, be of high quality, harmonize with other bathroom finishing materials and comply with the latest fashion trends. There are several most popular materials for wall decoration in the bathroom:

• mirror tiles;

The combination of paint and tiles in the interior of the bathroom

• dye;
• PVC panels;
• agglomerate;
• wood;
• wallpaper;
• drywall;
• self-adhesive film.

Preparing walls for finishing

Attention! If there is old tile on the walls, then it will have to be removed. To begin with, it is beaten off with a hammer, and then covered with a soil-concrete composition. This will make the tiles come off easier.

The abundance of materials on the market sometimes leads to a stupor. What to choose? What material is better? A sales assistant or a professional master will be able to answer these questions for a beginner. You can also rely on yourself and choose the material to your taste and budget.

Ceramic tiles: traditional classics

Tile is perhaps one of the most popular finishing materials. Its main advantage is durability. After all, the service life of ceramic tiles with proper masonry can be up to 60-80 years. Unfortunately, such a positive quality often remains unclaimed. Few people want to see the same tile day after day for several decades.

Ceramic tiles in the bathroom interior

The advantages also include: resistance to biological and chemical compositions, scratches, cuts and the absence of voids under the coating. But if you take into account all the disadvantages of tiles, it turns out that there are much more of them than advantages.

1. The need for careful alignment of the walls.
2. The cost of quality tiles is very high.
3. The tiles are beyond repair.
4. Touching a cold tile during water procedures is not a pleasant feeling.

Attention! Inter-tile seams are another drawback in the piggy bank of ceramic tiles. Moisture, dirt and soapy residue accumulate in them, which subsequently leads to the appearance of mold and fungus. To avoid this problem, you need to use high-quality grout.

Mosaic: stylish, fashionable and expensive

Mosaic tiles are a great option for decorating a bathroom. It is made from moisture-resistant and temperature-resistant materials. For example, marble, onyx, jasper or granite. Metal mosaic looks expensive and stylish, but it is used infrequently, because it is quite burdensome to care for.

Bathroom wall and floor mosaic

Mosaic tile is a strong, reliable and durable material. In addition, the mosaic is resistant to fading and is impact resistant. You can mount it on any surface, be it a wall, floor or framing a font.

Advice. If the surface has a rough surface, then the mosaic will correct this defect by masking the wall.

With this finishing material you can realize all your design fantasies. But it should be noted that the mosaic tile has many disadvantages. It's hard to believe? But it's true. Despite the attractive photos of bathroom design projects, the mosaic conceals its disadvantages behind them.

Mosaic made of natural stone

1. Price. Indeed, the price of this material is very high. This is especially true for natural stone mosaics. The ceramic counterpart is slightly cheaper.
2. Installing tiles requires special skill and skill.
3. The services of a professional mosaic installation are not cheap. This is just in case you can't do the work yourself.

But if we discard the price component of the tile and the cost of its installation, then the result will please you for a long time.

PVC panels: a budget option

When choosing PVC panels, many pay attention to their price. It is an inexpensive and affordable finishing material. Its positive qualities include:

• low price;
• the possibility of self-assembly;

PVC panels for bathroom

• ease of installation steps;
• no "wet" steps in the installation of panels.

Among the shortcomings, it can be noted that PVC panels are not classified as environmentally friendly materials. The choice of colors is small, despite the wide variety of materials.

Porcelain tile: a replacement for tiles?

Porcelain stoneware appeared on the market as a finishing material about three decades ago and began to actively gain popularity. It is in many ways superior to ceramic tiles, but its cost is much higher.

Porcelain tile on bathroom walls

Porcelain stoneware is stronger than tiles, it is resistant to mechanical stress and abrasion. Meanwhile, it can imitate natural stone finishes and look very expensive. There are practically no shortcomings in the material. Porcelain stoneware is moisture resistant and not afraid of temperature changes, which is ideal for finishing the bathroom.

wall painting

Painting the walls in the bathroom is another option. It has positive aspects, but it is also not without disadvantages. The benefits of using paint include:

1. Profitability. Using even expensive paint won't drain your budget much.
2. Ease of execution.
3. Possibility of self-finishing.
4. A variety of colors, which makes it possible to combine shades.

Matte paint on bathroom walls

The disadvantages of painting the walls in the bathroom are as follows:

• if the top layer is damaged, there is a high probability of mold;
• in a poorly ventilated room, such a finish will not last long;
• the need for careful preparation of the walls before painting;
• the need for frequent renewal of the paint layer.

Other bathroom wall finishes

Moisture resistant wallpaper

Wallpaper in the bathroom: nonsense or reality? Thanks to the new wallpaper manufacturing technology, you can purchase any options for decorating the room. They are made from moisture resistant composition. Nevertheless, experts do not recommend gluing wallpaper in places where the wall is in constant contact with water.

Advice. For wallpapering, a wall that does not have constant contact with water is suitable. It is desirable that it is not located on it.

Drywall

By itself, drywall is not a finishing material. Its main task is to level the surface of the walls. Owners of small bathrooms will have to abandon the use of this material due to the fact that it hides space.

Advice. When choosing drywall as a finishing material, it is preferable to purchase moisture-resistant boards.

Decorative plaster

Decorative plaster in the bathroom will last quite a long time, provided that all the rules for its application are followed. Otherwise, it will start to crumble. The indisputable advantage of plaster is vapor permeability, i.e. the material absorbs evaporated moisture, as a result of which the mirror does not fog up.

Decorative plaster

The disadvantages, perhaps, include the high cost. In general, the material is reliable, aesthetic and environmentally friendly.

The use of wood in decoration

Glued or veneered boards, solid wood or lining are the most popular options for decorating walls in a bathroom with wood.

Attention! It is not recommended to use an array. It is suitable for decorative inserts.

Few types of wood are suitable for wall decoration in the bathroom. Oak, ash and elm are the three main woods often used in renovations. A significant drawback of this option is that before installing the wood, it must be coated with an antifungal compound.

Bathroom wall decoration with wood

Agglomerate - artificial stone

New material on the building materials market. Outwardly, the agglomerate resembles ceramic tiles. But unlike it, it is stronger and more resistant to mechanical stress. It's easier to post it. A significant disadvantage is the price of the agglomerate, as well as artificial components. During long-term storage, the agglomerate may deform.

Mirror tiles

Mirror tiles in the bathroom look stylish and unusual. Many people know the fact that mirrors visually enlarge the space, so the tile is perfect for small spaces. It is easy to mount.

Mirror tiles

Meanwhile, caring for such a tile will bring a lot of trouble. Divorces from detergents, darkening of glasses, high price, instability to mechanical stress - these are the main disadvantages that scare away consumers.

Film

Self-adhesive film is a budget option. Despite the variety of colors, moisture resistance, ease of gluing and maintenance, the film will require careful preparation of the walls in the bathroom.

Wall decoration in the bathroom is an important stage in the design of the room. There are a lot of options and materials. Ceramic or mirror tiles, mosaics, drywall, wallpaper, plaster and more. You will definitely choose the right finishing material for your bathroom.

Wall decoration in the bathroom: video

Walls in the bathroom: photo

Our day begins and ends with the bathroom. Therefore, it occupies an important part of our life.

In this article, you will learn what materials are best to use for finishing the floor, ceiling and walls of the bathroom.

Floor finish

We all know well that the bathroom is a place where there is a lot of water. Splashes of water, dust and dirt end up on the floor, and we have to protect it well from this.

But how? This problem can be solved with the right flooring.

Often, ceramic tiles are chosen for the bathroom, which are easy to clean, but will be a little slippery when water gets in. Porcelain stoneware and mosaics are on a par with tiles - good finishing floor materials.

A more budget option is linoleum, but when water gets in, it becomes not as slippery as tile. In addition, water can accumulate between the seams, which will lead to early deterioration of the material.

The next finishing material is natural stone. If we compare it with linoleum, then I would like to note that the stone is much more expensive, but, of course, better.

Another reason why the stone is not popular is that it becomes very slippery when exposed to water, which is dangerous for human life.

Bulk floor - a mass of polymer, which must be applied to the primer. After hardening, you will get an excellent floor covering, which is also waterproof and non-slippery.

But, the only drawback is the high cost of the material, so the self-leveling floor is not very popular among buyers.

Natural wood floor. Here it would not hurt to specify the type of wood when buying. After all, there are not so many moisture resistant ones - teak, larch, puinkado, beech.

But, whatever you choose, be sure to treat the material with moisture-resistant agents for strength and durability. Yacht varnish also does a good job of this job.

Bathroom wall decoration

There are many materials for decorating bathroom walls. Let's look at them all in more detail.

Tiles and porcelain stoneware, these two materials are somewhat similar to each other. They both repel water and do their job well. They differ from each other only in price and quality.

Finishing with plastic panels, but when choosing them, you need to be very careful, as there are many fakes. They consist in the fact that they do not have a special coating between the seams, which would protect them from water ingress.

But fakes can be immediately noticed, since it must be visible.

Also, the bathroom can be finished with acrylic waterproof paints. You can choose any color that suits your room interior.

But, before starting work, do not forget to properly align the walls so that no defects are visible.

The walls in the bathroom can also be finished with wallpaper. But what?

First of all, these are simple waterproof wallpapers that are made of durable material.

Vinyl wallpaper is an expensive option, but reliable.

Photos are wallpapers, but they, of course, must also be moisture resistant. Otherwise, they will serve you no more than a month.

At this time, the most popular wallpaper is glass. They will certainly be both moisture resistant and water-repellent.

You can choose the color and design of such wallpapers yourself or order. Washable wallpaper for the bathroom is ideal.

Ignore the cheapest options, because their material is plain paper, which will get wet and tear in a few days.

Ceiling finish

The ceiling in the bathroom is also very important. We are used to the fact that it is often light-colored and painted with waterproof paint. But now you can see many other interesting options:

A suspended ceiling is a great option, as you can hide all electrical wiring or defects in the sub-ceiling between the ceilings.

Tension - the most practical, but at the same time the most expensive.

Reliable and durable - a vinyl-coated ceiling, it can even protect against water leakage from the top floor if you live in an apartment.

is not only a place for daily hygiene procedures, but also a room in the house that can set the tone for our mood. For example, in the bathroom we relax after a hard day, and in the morning, on the contrary, we are charged with energy and positive.

In order for the atmosphere to have a beneficial effect on all family members, it is worth taking care of a good repair and proper decoration. Today we will talk about the intricacies of wall decoration in the bathroom.

Choosing the right material

Whichever of the materials for wall decoration you choose, there are several mandatory characteristics that it must meet:

First of all - the hygienic properties of the material. Its safety for health should not cause the slightest doubt.

Various toxic impurities in the composition are a reason to refuse to buy. such material will release hazardous substances when exposed to water and steam, which can lead to poisoning. The best option is an environmentally friendly material.

Ease of maintenance and operation. Before buying any material, ask about the rules for caring for it. Are there any nuances? Does he need special detergents/cleaners? The ideal option would be a material that lends itself well to ordinary wet cleaning. This will significantly save your time and effort.

Resistant to moisture and sudden changes in temperature. Firstly, a material with such properties will last longer. will not be destroyed by steam. Secondly, near the waterproof walls in the bathroom, it will be possible to safely place electrical appliances.

Since the bathroom is also a relaxation zone, the style of the interior also plays an important role in wall decoration. The abundance of materials allows you to embody any bathroom wall design that you like. Please note that the material must organically fit into the environment both in structure and in color.

Bathroom wall decor ideas

To date, there are more than a hundred different variations of wall decoration. Despite the emergence of cutting-edge materials, traditional options have not lost their popularity.

Confirmation of this is the photo of the walls in the bathroom in various interior magazines. In order to make the right choice, think in advance what you would like, what design style is right for your bathroom.

It is also worth considering the footage of the room itself and think about how much you are willing to invest in decorating its walls. As for the material itself, several options are most popular, which we will now discuss.

Classical ceramics. Almost everyone who wonders how to finish the walls in the bathroom, ceramic tiles immediately come to mind. There is nothing surprising in the fact that tiles have not lost their popularity for many years. The advantages of using it are obvious:

• durability of the material even with minimal maintenance;
• smooth surface is easy to clean;
• A variety of colors and patterns allow you to create a decor for every taste.

Please note that ceramic tile is not a cheap material, and repair work on its laying should be carried out exclusively by a professional. If you take up the decoration of the walls yourself, then you risk simply spoiling the tile, because you need to know a lot of the intricacies of this process.

Decorative plaster for the bathroom. This option of wall decoration will become a kind of highlight in the interior of the bathroom. It should be remembered that such material is exposed to steam and water, so it must be covered with a layer of protective varnish.

It is not recommended to start plastering the walls in the bathroom on your own. The material is not easy to handle and can be easily damaged if handled incorrectly.

Linoleum in the bathroom is the pinnacle of originality. Due to the low price and ease of finishing work, linoleum is in great demand for wall decoration in the bathroom. You can use ordinary linoleum, which is used for coating, or you can purchase a special one for walls.

Please note that there are not so many colors and decor variations for this material - it will not work to give free rein to fantasy. When you finish the walls in the bathroom with linoleum, pay special attention to the seams so that moisture does not seep under them later and spoil the coating.

Painting as an alternative. If you can't afford expensive tile, then there is a great budget option - painting the walls in the bathroom. In addition, you can combine both of these options. paint does not like water, so it is not suitable for wall decoration next to the washbasin and the bathroom itself.

Conclusion

We examined a variety of types of wall decoration in the bathroom - from the most popular and expensive to traditional budget ones. After weighing all the pros and cons of a particular material.

You will choose the perfect finish for you. Good luck!

Photo of wall decoration in the bathroom

The bathroom is a strategic object in our home, and its repair must be approached with all responsibility. Finishing the bathroom in its diversity can surpass those options that can be applied in any other room.
When choosing building materials, it is only important to remember that this is a room with high humidity. Moreover, its coefficient is higher, the smaller the area of ​​​​the bathroom.
This refers to either a separate bathroom, or combined with a toilet. We will tell you about the intricacies of finishing these rooms and try to help you with choosing the right interior.

In typical high-rise buildings, the size of such a room rarely exceeds six square meters, plus poor ventilation and a high probability of flooding. Therefore, in a small bathroom, the choice of materials is not as wide as in a spacious bathroom with a window, which is done in private houses, mansions and luxury apartments.
Finishing options for a small bathroom are no longer based on a variety of materials as such, but on a huge range of textures and colors.

floors

It would not be superfluous to say that starting repairs, you need to replace all taps and pipes, even if they are not leaking yet. As for the floor, here, first of all, you need to exclude water leaks from you to the neighbors below.
Breakage of the mixer or poor-quality connection of the pipe under the bathroom - at least once it happens to everyone.
So:

• The floor must be airtight, and only a cement screed can provide it with such a property, on top of which the tile is laid. In order for the screed to be of high quality, a waterproofing layer must first be made.

• After removing the old coating, and having cleaned the floor to the floor slab, a primer is applied to its surface. Then the waterproofing mixture is applied with a roller to the floor, capturing 10-15 cm of the walls.
  Corner joints are closed with insulating tape.
• The instructions on the packaging of the waterproofing compound will inform you in what ratio it is diluted, and how long it takes for each layer to dry. With the help of the level, markup is performed and beacons are installed.
• In previous years, the screed was made of cement-sand mortar, its low price contributed to this. But it is difficult to perfectly level the floor with such a solution.
  In addition, the ratio of components was not always correct.
• With the advent of special self-leveling compounds, this process has been greatly simplified. These mixtures are also sold dry, in 25 kg bags.
  With the help of a construction mixer, a certain amount of dry composition and water is mixed in a container and spread evenly over the floor.
• Such a screed hardens quickly and, subject to the recommendations of the manufacturer, cracks never form on it. You can level the floor in this way not only in the bathroom, but also in any other room.
  If you want to know all the nuances of this work and do it yourself, watch the video.

• Only after the full strength of the screed, you can proceed to further finishing. Nothing better than ceramic tiles, for the floor in the bathrooms have not yet been invented.
  The dimensions and thickness of the floor tiles are slightly larger than those of the tiles intended for wall cladding.
• Even if your walls are decorated with some other material, you still need to put tiles on the floor. To do this, when you have a perfectly even screed, is not difficult.
  Tile adhesive and grout are purchased immediately when buying a tile.
• There are, of course, options for natural stone slabs: travertine, onyx, marble - but this is a rather rare occurrence, and few people can afford it. They use such floor tiles when the entire bathroom is decorated in this style.
  In the photo below, even the washbasin countertop is made of natural stone.

• There is another design option, which is still little known in our country. This novelty is a rubber tile with a stainless metal top layer.
  Its surface can be similar in appearance to aluminum ceiling rails - matte, glossy, bronze, etc.
• But ceramic tile is a classic in bathroom decoration, it is much cheaper than marble and other frills, and has an unimaginably huge range. Manufacturers produce it in certain series, which can be arranged for finishing both the floor and the walls in the same color scheme.

• The floor can be completely or partially lined with mosaic tiles - ceramic or glass. If the area of ​​​​the room allows, the mosaic is combined with ordinary tiles in the form of a panel.
  These are just design nuances, and such decor is also performed on the floor in combination with the walls.

Walls

In the presence of good natural ventilation of the bathroom, the decor possibilities expand. Options for finishing the bathroom with drywall, washable wallpaper, natural wood become quite appropriate.
A spacious room can be zoned using combinations of several types of materials in the wall cladding in the bathroom. From what method of decorating the walls you choose, it will depend on whether they need to be leveled.

Plastic

Polymer materials: plastic panels and PVC lining, these are the most budget options - finishing a bathroom with plastic will cost the least. And this is the only way in which you do not need to level the walls, because the panels are mounted on a frame - wooden or metal.

So:

• Of course, the choice of colors for plastic panels is not as great as that of ceramic tiles, but their installation is not so time-consuming. Sheathing walls with plastic can be five times faster than laying tiles.
• Plastic is easy to care for, durable, not afraid of dampness. If the frame is wooden, the bars can simply be coated with an antiseptic before hanging the panels.
  If plastic is chosen for the walls, then the ceiling in this case is also sheathed with plastic panels, only of a lighter shade.

• A bathroom sheathed in plastic can look quite respectable if you take panels with a silver thread or gold border trim, correctly select plumbing fixtures, fixtures and accessories for them. The picture above is a great example of such an interior.

Ceramics

In fairness, it should be noted that ceramic tiles are the most popular material for creating a bathroom interior, despite the laboriousness. The options for finishing the bathroom with tiles are so extensive that they allow you to create a unique design.

• Of course, laying tiles should be done on a flat surface. Alignment of the walls can be done in the classical way - with a plaster mortar.
  Experienced craftsmen lay the tiles immediately on the cement mortar, simultaneously leveling the walls.
• You can go the other way - mount cement slabs on the wall, which will serve as a base for tiles or mosaics. The standard size of such a slab is 1.5 * 0.9 m, 12 mm thick.
  They are easy to cut and perfectly smooth out all the bumps.
• Cement slabs are mounted on the frame, and fixed with self-tapping screws in increments of 20 cm. The joints between them are puttied and glued with fiberglass tape.
  It turns out a waterproof connection.

• Having a perfectly even base, the tiles are laid on a special mastic or glue. To apply the adhesive composition, a notched trowel is used, this improves the setting of the mastic and the fixation of the tile on the wall.
  It is only necessary when buying glue to pay attention that it is intended for working with a vertical surface.
• When choosing wall tiles, the consultant will always be able to suggest how to properly combine it with floor tiles; what decorative elements can be used in one or another set; how to combine smooth tiles with mosaic tiles.

There is a material that looks like ceramic tiles. It's called an agglomerate.
Thin, and more durable tiles are much easier to install and operate.. They have a glossy surface and a large selection of colors.
But due to the higher price, this material was not widely used in our country.

Combined wall decoration

Combining materials that are completely different in structure and colors, the easiest way is to create an interior that is unlike any other - you just need to turn on your imagination. And of course, you need to carefully prepare the surface of the walls for finishing.

• We all know that there are many types of wallpaper that are not afraid of moisture. This is non-woven, and acrylic wallpaper, and fiberglass.
  Waterproof wallpaper has an icon depicting three waves.
• But the wallpaper itself is one thing, their connection with the wall surface is quite another. You can't call it airtight.
  Therefore, in rooms with a high humidity coefficient, which include standard bathrooms, it is better not to use them.

• But in spacious rooms with natural ventilation, they can be used to create an unusual design. Most often, wallpaper is used in various combinations with the same ceramic tiles or plastic.
  In any case, in the area where the washbasins and bath are located.

• In the same way, ceramic tiles are combined with wood. You can, of course, make wall cladding completely out of wood, but do not forget that this natural material is susceptible to decay.
• An antiseptic cannot one hundred percent protect a tree from constant moisture. Therefore, the best option is one in which the part of the wall that regularly gets hot water will be tiled.

• In design projects, the interior of the bathroom can be made in a certain style and look no worse than the living room. Interesting combinations of finishing materials, beautiful mirrors, panels, curtains and even chandeliers - all this makes up a single image and makes an indelible impression.

ceilings

Thinking about the design options for the bathroom, do not forget about the ceiling. It should be practical, and organically fit into the overall interior.
The options for finishing the ceiling in the bathroom are very numerous:

• The most inexpensive of them will be pasting the surface with ceiling tiles. This option for finishing the bathroom is most often used where there is a very small height of the room.
  A large selection of tile textures allows you to choose it for any interior. It must be glued to a flat surface.
• It is much easier to make a suspended ceiling that does not need to be leveled.. The plastic ceiling goes well with walls made of any material: even tiles, even wood, even wallpaper.

• In a well-ventilated and large enough room, it is quite possible to make a plasterboard ceiling. Simply, in this case, moisture-resistant GKLV cardboard is used.
• The final decorative finish of the plasterboard ceiling in the bathroom is made by painting its surface with latex or silicate water-based paint of any shade.
• It is also possible to paint the leveled base surface of the ceiling, but this is very time consuming. In addition, these types of paint can be applied to the plaster surface only a month after the leveling layer has completely dried, and this will delay the repair time.
• An excellent option for a bathroom would be a stretch ceiling. Such a design can beat any geometrically irregular shape of the room, it will allow you to embed spotlights and make an interesting backlight.

• The stretch fabric is not afraid of moisture. In case of flooding from above, the water will simply collect in the interior of the ceiling.
  You can’t just drain it without the help of specialists, and this is its minus. If you don’t have neighbors from above, this design will be a great choice.
• The most versatile option for finishing ceilings in bathrooms can be considered a suspended aluminum structure. It can be rack or cassette ceiling - it all depends on the configuration of the module.

aluminum ceilings

• Such an option, as they say, for centuries. Aluminum is not afraid of corrosion, high temperatures, condensation.
  The surface of the modules can be of almost any color and texture. They are sold complete with frame parts, it is easy to mount it, guided by the attached assembly diagram.

Determine the order of work: floor, walls, ceiling - you need to logically. The most time-consuming and dirty work is done first.
This includes leveling surfaces, painting and laying ceramic tiles. The point is to do one job without ruining another.
Tiles are laid on the floor last. If you did everything right, the result will certainly please you, because the bathroom is a place where a person needs positive emotions.

Despite all the simplicity and cheapness of decorating the walls with bathroom paint, you need to know and several material flaws.

• First of all, the walls require careful preparation: they should not have the slightest flaw, because after painting with especially matte paint they will be very striking.
• Secondly, even moisture-resistant paint is better not to use directly over water sources: near a sink or bathtub. In order for the repair to be durable, and the created interior to last for more than a year, it is better to combine the finishes.

No. 3. Plaster

Naturally, not all plasters have the necessary decorative and operational properties. What material is suitable for finishing the bathroom?

• sanitizing plaster, which has high strength characteristics, allows you to create a reliable waterproofing layer. It is easily applied to the surface, does not crack during operation, can absorb excess moisture, normalizing the microclimate in the room. However, designers still recommend not using such plaster for finishing, but pay attention to the following types;
• moisture resistant decorative plasters, allowing you to create a surface with a certain texture, pattern, relief, Venetian plasters;
• often used when decorating a bathroom facade plasters. They contain synthetic substances that allow you to withstand all the negative influences of the environment. Such a coating will certainly withstand the effects of splashes from a bath or shower, and at the same time will please with a nice appearance.

Do not forget about various decorative techniques. So, on the finished layer of plaster using a stencil, you can apply any pattern that will decorate the room and give it a certain style.

No. 4. Wallpaper

Many are quite critical of the idea. But if you choose the right material and use it correctly, you can achieve a stunning effect. Among the advantages of decorating the walls in the bathroom with wallpaper can be noted:

• the uniqueness of the created interior and a huge range of different colors;
• saving money and time, because tiling the same area will be more expensive and long;
• high maintainability of wallpaper;
• this is a great option for those who like to change the situation often, because with wallpaper it is very easy to change the interior.

Naturally, there are also disadvantages:

• Not all wallpapers are suitable for use in the bathroom. Moisture-resistant materials have a three-wave icon on the package - this is exactly what we need;
• wallpaper is not the most durable material that is very easy to damage;
• even the most reliable and waterproof wallpapers are not suitable for decorating places above the bath or in the shower. Here it is better to use a different material and try to skillfully combine different types of finishes.

Great for use in the bathroom , which are not afraid of moisture and can be painted, which do not form joints, as well as and acrylic wallpaper.

No. 5. Drywall

To the main benefits gypsum board should include:

• low price;
• light weight, which facilitates the installation process;
• excellent performance, because drywall increases sound and heat insulation in the room.

You only need to choose moisture-resistant drywall, and it is easy to recognize it by the characteristic green color of the sheets. Among the cons similar finishes can be noted:

• the need to additionally decorate the created surface, since the green sheets of gypsum board do not look, to put it mildly, very attractive;
• the need to use additional components for the installation of drywall, which increases the cost of the design.

No. 6. Plastic panels

Plastic panels, although rarely used in bathroom decoration, can boast a lot of positive qualities:

• this is one of the most budget options for finishing the bathroom;
• panels are easy to install;
• can hide all communications and pipes;
• durability;
• resistance to temperature extremes;
• hygiene and moisture resistance;
• ease of care;
• , which imitates stone, wood or other coatings.

However, it is worth considering some shortcomings inherent in plastic panels:

• low mechanical strength;
• combustibility;
• "condensate" that collects on the surface.

No. 7. A natural stone

This is one of the most expensive, but, no doubt, spectacular solutions. Often when decorating walls they use exactly marble- This is one of the safest natural stones that does not accumulate high levels of radiation. In addition, marble has a low moisture absorption coefficient, and its porous structure allows the material to "breathe" and thereby regulate the microclimate in the room.

But a material such as marble has some disadvantages. Firstly, it is very expensive, secondly, it requires constant careful maintenance, and, thirdly, this material does not resist acid-containing products well, so maintenance is even more complicated. In addition, it is quite heavy material.

In addition to marble, for wall cladding is actively used limestone, sandstone, slate, granite and cobblestone.

No. 8. Fake diamond

Artificial stone has almost all the same advantages as natural stone, but is devoid of many disadvantages, which makes it an ideal and serious competitor to conventional ceramic tiles. Among the main advantages of artificial stone it is worth noting:

• beautiful appearance and a huge range of material that can imitate any breed of natural stone. A variety of colors, textures and sizes allows you to create a dream interior, choose the perfect material for the conditions of a particular room;
• high strength and resistance to mechanical stress;
• absolute resistance to mold and fungus;
• durability;
• ease of installation and maintenance;
• hygiene and environmental safety;
• although this is not the cheapest way to decorate bathroom walls, artificial stone will still cost many times cheaper than natural, and its installation will be much easier due to less weight.

Artificial stone is great for bathrooms, and even the wettest areas can be finished with it. The decorative stone also looks great when facing the shower, because in itself the appearance of flowing water over the stone is quite natural and natural. In general, artificial stone is a huge scope for imagination in the field of interior design, but it is necessary to veneer all the walls in the bathroom only with stone with special care so as not to turn the room into a dungeon or a castle. Often the stone is combined with other finishing materials.

No. 9. Self-adhesive film

Quite an interesting and unusual option for finishing the bathroom. The film is waterproof and the seams between the sheets are covered . The benefits include:

• very low cost;
• a sufficient choice of colors, so it will be possible to imitate the texture of wood, stone or any other material. There are also films that are distinguished by a relief volumetric surface;
• The material is easy to apply and easy to clean.

Naturally, not without its downsides:

• it looks like a cheap material. Even if from a distance the film may indeed resemble a stone or a tree, on closer examination it betrays its secret;

  No. 10. Some unusual solutions

  If you want to make the interior of the bathroom completely original, then you can take a closer look at such solutions:

  

  In conclusion

  In pursuit of interesting interior solutions in the decoration of bathroom walls, do not forget about the practical side of the issue. The material must be strong and durable, moisture resistant and hygienic. If you really want to use some kind of original finish, then it is better to combine it with materials that have already proven themselves in such difficult conditions.