Do-it-yourself slime without glue and starch. How to make a slime out of pva glue. How to make a transparent slime at home, a recipe with a description and photo

You can make a slime without glue and sodium tetraborate using water, soda and dishwashing detergent, the main thing is to cook it all correctly according to the recipe below. Many people know the most memorable character of the cartoon "Ghostbusters" - Slimer. A harmless ghost is familiar to everyone.

Several types of slimes with their own hands

When choosing a recipe, pay attention to the time it takes and the ingredients.

Types you can cook:

• From PVA and borax (sodium tetraborate),
• From detergent and soda,
• From shampoo (no glue),
• From flour and water (no chemicals).

Making any of them does not require much effort and time. Each has its own advantages and disadvantages, so let's get to know them better.

The easiest way to make

One of the easiest to prepare and successful options includes a few ingredients:

• Sodium tetraborate (borax),
• PVA glue,
• Dye,
• Disposable container or any that is not a pity.

The fresher the glue, the better the result. Sodium tetraborate is sold at any pharmacy without a prescription. You can use not a solution, but a powder, borax, it does not matter.

Now consider the recipe:

• Prepare a container in which the ingredients will be mixed. It can be any, you should not take the dishes from which you eat, toxic substances are still used.
• Add dye to the glue, the more, the brighter the color will be. When adding tetraborate, watch how thick the mixture is, do not pour too much. If you are using a powder instead of a solution, first dissolve a small amount in slightly warm water.
• So that it is guaranteed not to stick to your hands, put it in a plastic bag and knead it well. When it becomes elastic - take it out, it is ready.

Without sodium tetraborate and PVA

If you didn’t like the previous option or you don’t have the right ingredients for it, the soda and detergent option will definitely suit you.

Almost everyone has these ingredients, and the result will be just as good.

For it we need:

• Dishwashing liquid,
• Water,
• Soda,
• Dye (gouache).

Any brand of detergent will do, there is not much difference. Water is needed then, if necessary, to dilute the mixture that is too thick.

Sequencing:

1. Here you can take any dishes, the main thing is that it is convenient to get the finished toy. The role of glue in this recipe will be played by the washing liquid, so the size of the future toy will depend on its quantity.
2. Soda is taken the amount necessary for the desired density. Pour, stirring constantly, if necessary, add more water or detergent. Slime from soda is ready.

From shampoo without glue

If you don’t have glue on hand or you just don’t want to add it there, this slime will be the best solution. The variant of its manufacture could be the simplest, if not for the time for which it is prepared. In order for it to acquire the qualities we need, it must stand overnight in the refrigerator.

Everyone will need the ingredients:

• Shampoo,
• Shower gel, cleanser.

Sequencing:

1. No special efforts are required, you just need to mix all the ingredients in equal proportions.
2. Just put the finished mixture in the refrigerator and the next morning you will have a slime ready to use on your hands.

Lizun is an unusual children's toy that develops hand motor skills and imagination. However, purchased foreign ones are very toxic, so creating such a toy at home from safe components will not only save money, but also an interesting pastime with a child.

The simplest slime recipe consists of 100 gr. plasticine, packaging of edible gelatin and 100 ml of water.

Soak gelatin in cold water in a metal bowl, leaving to stand for an hour. Then heat to a boil, then remove from heat. Soften the plasticine with your hands and mix it in a plastic bowl with 50 ml of water. Pour gelatin here and stir until you get a viscous mass, which is desirable to put in the refrigerator or any other cool place.

As soon as it hardens, the toy is ready.

Recipe with sodium tetraborate

This method is the fastest and cheapest, but starch slime is fragile and will only last a day or two.

From soda

Mix in a plastic bowl 50 gr. , a quarter of a glass of warm water and dye, mix the substance well. Separately, mix water and baking soda (a tablespoon), then add this solution to the adhesive mixture.

Mix, make a ball and enjoy playing with the finished treasure.

Soap or detergent

Take detergent or liquid soap, Titanium glue and. Mix soap and glue in a ratio of 2:3, then add food coloring and mix thoroughly again. Place it in a plastic bag and carefully knead it with your hands to remove glue lumps.

You can play with the slime right away.

How to make a liquid and transparent slime?

A transparent liquid slime is made a little more difficult than a thicker and more colored counterpart.

To create it you will need:

• polyvinyl alcohol - 100 gr.;
• plastic utensils;
• - 25 gr.;
• stirring stick.

All you need to do is pour alcohol into a bowl, stir, add sodium tetraborate and stir quickly so that the mixture looks like the desired slime. Cooking takes about 10 minutes (you need to stir for a long time and painstakingly), you can immediately.

Step by step recipe - YouTube video:

1. You can decorate the slime by additionally adding glitter and mother-of-pearl or fluorescent paints to make it glow in the dark. And to have a pleasant smell, add your favorite essential oil during cooking.
2. It will be interesting for the child to touch the toy if you use foam balls, which can be found in any art market or hardware store.
3. Haven't found a handy mixing stick? You can do this by hand, but be sure to wear latex gloves.
4. remember, that

Hello! I am in touch with you again, Tatyana Kashitsina. And we will talk with you about a very popular toy for children, which is not only exciting, but also develops fine motor skills. But for adults, it acts as a kind of anti-stress. Guess what will be discussed? And we are talking about a slime, or as it is also called, Velcro, jumper, slime or handgam.

Our conversation will be simple and informative at the same time. We will learn how to make a licker at home. After all, it will be very cool to please our kids with toys that are made by hand. Moreover, there will be no large costs, because every house has all the components.

Well, if you don’t really like the idea with such a product, then cook and start modeling animals, which is also very useful and entertaining.

Let's start with the most common way to make your slime 100% perfect. True, I advise you to use only corn starch, not potato starch.

Well, what are you ready to create the favorite hero of many children from the movie "Ghostbusters" ?? Then let's get to work.

We will need:

• Cornstarch - 1 tbsp.;
• Warm water - 1 tbsp.;
• PVA glue - 1 tbsp. l.;
• Dye - any;
• Glitter - optional.

Manufacturing process:

1. Pour the starch powder into a bowl and pour a quarter cup of water.

2. Boil the rest of the water and stir in the soaked starch. Next, boil our mixture for about a minute, stirring constantly.

3. Now take a tight bag and pour a third of the volume of liquid starch into it, then a couple of drops of dye, glue and sparkles.

If you add a lot of glue, then the slime will be sticky. And if you overdo it with starch, then it will fall apart.

How to make a sodium tetraborate toy at home

Well, this is the so-called classic version of making a sticky toy. The method is very simple, and the quality is probably one of the best. After all, he sticks well, jumps and even washes.

And sodium tetraborate, which we will need, is available in all pharmacies and radio departments. It is better to buy a ready-made 4% solution, or take a powder solution and dilute it yourself (1 tablespoon in half a glass of water).

We will need:

• PVA glue - 100 gr.;
• Sodium tetraborate - bottle;
• Dyes to choose from - gouache, brilliant green, acrylic paints, food dyes;
• Dishes with a size of more than half a liter;
• Wooden stick - for stirring.

Manufacturing process:

1. Take the glue and pour it into a container.

2. Next, send any chosen dye and stir.

3. Gradually add the tetraborate solution while continuously stirring the mass.

4. The mixture should thicken, remove excess moisture with a napkin. Put our jumper in a plastic bag and remember a little with your hands for about 3-5 minutes.

5. That's all, our toy is ready.

Shampoo and Salt Slime

This option is also not bad, and most importantly, it is practically harmless, but not everyone succeeds in making a toy from these funds. Well, try it, you might succeed!!

Instead of shampoo, you can take any gel, but without scrubbing particles.

We will need:

• Shampoo - 3-4 tbsp. l.;
• Salt - a little;
• Dye - optional.

Manufacturing process:

Pour the shampoo into a deep container and add quite a bit of salt, stir well. If you overdo it with salt, then handgam will not work. Well, if all proportions are met, then you will see how the mass becomes thick and sticky.

This craft is very similar to sticky jelly and can also be fun to play with.

Video on how to make handgum without glue and sodium tetraborate

And now I suggest you see everything with your own eyes, if you doubt that you will not succeed. In this recipe, we will use liquid soap.

DIY toothpaste licker

We will need:

• clear toothpaste,
• Glue Titanium powder
• Plastic bag.

Manufacturing process:

1. Take a strong bag and squeeze the paste into it, and then add the glue powder.

2. Zip the bag or tie it tightly. Then shake the contents so that the components are mixed into a homogeneous mass.

Slime without glue and starch

Here is another great way to prepare handgum in my opinion. And if you don’t add dye yet, then it’s safe, and you shouldn’t worry that the child can taste the toy or fiddle with it for a long time in his hands.

We will need:

• Flour - 300 gr.;
• Cold water - 1/4 cup;
• Hot water - 1/4 cup;
• Any dye - a couple of drops.

Manufacturing process:

1. Mix flour with cool and warm water.

2. Add dye of any color.

3. Stir the mixture until smooth, and then put it in a cool place for three hours.

That's how easy and simple it is. A couple of minutes and you're done!

An easy way to make shaving foam

Well, if you have shaving foam lying around, then our antistress can be made from it. I watched the video plot, and I say “Wow”, such a huge slime turned out, stunned, I share with you:

And in conclusion, I want to give a couple of tips for caring for slimes:

• It is better to treat toys with an alcohol solution, so they will last longer.
• But it is not advised to dip into the water.
• To keep the shape, you need to inject alcohol inside with a syringe.
• It is better to store them in a closed container, and in a week it is better to make a new Velcro.

That's it. Everything turned out short, concise, but at the same time detailed. I think now you will definitely want to make a slime yourself, and will not buy. For me, it’s easier than toys to come up with.

Hello! In this article I will write several ways how at home you can make the famous and beloved slime by many. This toy was very popular in my childhood, because it was in the 90s that the cartoon and the movie "Ghostbusters" were shown. In this cartoon there was a ghost Lizun, which became the prototype of the famous toy. Lizun could stick to the wall, table, quickly change its shape.

You can also make a similar toy yourself. This is a fun activity for kids (they love all sorts of experiences) and adults will enjoy the creation process too. So, I write some of the best ways.

According to this recipe, I made a slime yesterday with my daughter. The process is very fast, it takes a couple of minutes. First you need to stock up on the necessary ingredients. It turns out according to this recipe a substance similar to "smart plasticine". For the slime you will need:

• PVA glue - 100 ml
• solution of 4% sodium tetraborate (boron) - 1 vial
• food coloring (or brilliant green, or gouache)
• plastic container
• wooden stick (pencil or spatula)

From these proportions, a fairly large slime is obtained. If you need a small one, reduce the amount. You can make several slimes of different colors, so the children will be much more interesting.

I did it in a jar of gouache. You can use any plastic jar or container. First, pour PVA glue, add any dye that you have available to it. I took orange food coloring (I still have it from Easter). You can also paint with greenery or gouache. Mix the glue with paint thoroughly with a pencil until a uniform color.

Then pour sodium tetraborate and mix well. If tetraborate is not enough, then add it little by little. The glue should become thick. The mass will begin to peel off the pencil and jar. After that, you can take it with your hands and knead. It relieves stress in adults well, on the table it slowly spreads into a small smooth puddle.

The only thing I didn’t like was that such a slime (or smart plasticine, or handgam, which translates as chewing gum for hands) paints hands and a table. I think it would be better with gouache. It also doesn't have a very pleasant smell. Optionally, you can add flavorings to it, if there are any in the house.

The price of such a slime is small. I bought glue for 35 rubles, sodium tetraborate is sold in any pharmacy without a prescription for 19 rubles, the dye cost me 5 rubles. Total - 59 rubles. But I used glue for one slime somewhere in the sixth part of the jar, less than a third of the tetraborate.

It is important that the glue is fresh, homogeneous, without water. Nothing will work out of bad glue. Keep the slime in a closed jar so that it does not dry out.

Here's what I got (video):

Lizun without sodium tetraborate.

You can make a slime very similar to the previous one, only use liquid washing powder instead of sodium tetraborate. It is the washing powder in the gel, not the fabric softener and other gels.

Slime made of plasticine and gelatin.

This method is popular and has good reviews. They write that it turns out a good slime. But such a toy is short-lived. Suitable for young children to develop fine motor skills. You will need:

• plasticine (color optional) - 50 gr.
• gelatin - 25 gr.
• warm water - 30 ml
• plastic container for mixing ingredients
• a metal container for heating gelatin (you can use plastic or ceramic if you use a microwave)
• wooden stick for stirring

First, in a metal container, fill the gelatin with cold water so that the water covers it. Leave for 20 minutes for the gelatin to swell. After that, it is necessary to heat the gelatin so that it completely dissolves. This can be done in a water bath or in the microwave. In the second case, heat the gelatin for about 2 minutes.

In a plastic container, pour plasticine with warm water, mix with a wooden stick until smooth. Add the cooled gelatin to the plasticine and mix everything thoroughly again. Then put in the refrigerator to harden our slime. When it freezes, it's ready! The finished toy should also be stored in the refrigerator in a closed container.

How to make slime from starch and PVA glue.

This is also an easy way, like the first with the second. The difference is that liquid starch is taken as a thickener (and not boron or liquid powder). Required components:

• PVA glue - 100 ml.
• liquid starch (this is not food starch, but a chemical laundry detergent). You can take food, but with it the result will be worse. If you take food starch, it will need to be mixed with water. - 140 ml
• dye (brilliant green, gouache, food)
• plastic bag

They write that it is according to this recipe that the slime will turn out, as in the store. To make such a slime, you need to pour starch into a small bag, add paint and glue to it. Mix everything thoroughly with your hands until smooth through polyethylene. After that, the slime should be given time to freeze slightly in the refrigerator (about 3 hours). Everything, the toy is ready, you can play!

If excess liquid remains after mixing, it must be drained.

Other slime options at home.

There are many more different options. But they do not guarantee a good result. Most of those who did according to other recipes write that nothing happened. For example, slime is made using baking soda. Only in this case a very hard substance is obtained, which cannot be called a lizun, a handgum, etc. in any way. There's no way to crush it. So it's better not to waste your time making such a creature.

There is also a way to make slime from shampoo and titanium glue. But the slime by this method, too, most likely will not work. It will spread, stick to your hands.

There is also a way to make a slime using polyvinyl alcohol instead of glue. But this method is quite troublesome. First, you need to find this very alcohol in powder, dilute it correctly with water. And then cook for 35 minutes. I think not everyone wants to bother like that when there are ways that are more affordable and faster.

In some sources I found a recipe for making slime from flour, water and dye. But every person knows that by mixing flour with water, you get dough. You can sculpt from this dough, it's safe for kids, good for fine motor skills, but it's not a slime. I make this colored play dough for my kids because it is softer than plasticine.

Tips for making and "care" for slime.

1. Store the slime in a closed jar with a tight lid. Otherwise it will dry out.
2. Do not store slime in warm places. Moreover, do not put it on the battery, in the sun.
3. Do not place handgams on a fleecy surface. Because of this, hairs will stick to it, it will lose its structure and smoothness.
4. You can add flavorings or essential oils during cooking to kill the smell of glue and other ingredients.
5. You can experiment with the composition of the mixture. Two drops of vinegar can be added to the paint mixture - the slime will stretch better. If you add a little hydrogen peroxide, the slime will turn out to be more airy, not sticky. If you add glycerin, then the slime will become slippery, like a real one.

If you know other good ways to make more slime at home, write in the comments! And share this article with your friends on social media. networks. See you!

Provide your child with positive emotions by giving him a slime - a toy, the prototype of which is a ghost from the popular film of the end of the last century "Ghostbusters". Like that funny ghost, slim stretches, spreads and does not have a permanent shape.

Although this toy can be bought at any children's store, it is also easy to make it yourself. You decide what density and color to make slime. There are many options, without PVA glue. Let's take a look at a few of these below.

We make slime from detergents

How to make slime from shampoo without It's actually not difficult. To make it, you will need components that can be found in every home:

• shampoo;
• shower gel or dishwashing liquid.

First, select a container where you mix shampoo and (dishwashing liquid) in equal proportions. It is important that the products do not contain granules, then the slime will turn out to be transparent. After mixing until you get a homogeneous mass, and then put the container with the mixture in the refrigerator.

The very next day, the toy can be handed over to the child. But it is necessary to ensure that he does not pull the slime into his mouth, and after the game he washed his hands. This slime should be stored in the refrigerator in a closed container. Also, it should be thrown away when a lot of debris sticks to it. Because he loses his properties because of him. In addition, the maximum storage period is one month.

flour slime

This is a relatively safe slime that is suitable for even small children to play with. Especially if you use natural dyes instead of food. Although in this case, the toy will not turn out so bright.

Now let's look at how to make a slime without PVA glue and tetraborate. As for the previous recipe, you will need materials that any housewife will have at hand:

• flour;
• hot water;
• cold water;
• dyes.

How to make a slime without PVA glue? First, take a bowl or any other deep container. Sift two cups of flour into it, so the mass will be homogeneous and easier to cook. Next, add cold water, and then hot, but not boiling water, about a quarter cup of each. Now you need to mix the mixture until a homogeneous consistency, it is important that there are no lumps in it.

Then you should add a few drops of dye: food or natural - it depends on your desire. Stir the sticky mixture again. Then put the container in the refrigerator for several hours. When the slime has completely cooled down, it can be handed to the child for the game.

Lizun from water

How to make a slime out of water without PVA glue? Consider another option for creating a toy. It is incredibly easy to manufacture and is considered the most environmentally friendly. For this you will need:

• warm water;
• starch (can be corn);
• dye.

Making a toy

How to make a slime without PVA glue? In equal proportions, mix warm water and starch until a homogeneous (no lumps) mass is obtained. Add the dye and mix thoroughly again, then form balls from the resulting mass. And now - the slime is ready.

It is important to remember that the water temperature should not be room or cold - then it is more difficult to knead the slime. In addition, do not put too much starch, because of this, the slim can become hard.

plasticine slime

How to make slime without sodium and PVA glue? There are many ways. Now let's get acquainted with the next of them. The advantage of plasticine slim is that it does not blur, retaining the look that you gave it. Use the following materials to make it:

• food gelatin;
• plasticine.

How to make slime without PVA? First you need a metal bowl. Fill it with cold water. There, dissolve the gelatin, in the proportion that is indicated on its packaging. Then leave it to infuse for an hour. After the specified time, put the bowl on the fire - the liquid should begin to boil. As soon as this happens, it must be removed from the fire.

Next, you need to warm up the plasticine in your hands (about 100 grams). Then you need to pour water (50 ml) into a plastic container. Then, using a spatula, mix it with plasticine. Now pour the gelatin into the plasticine and knead until you get a homogeneous mass. And the final stage of production - put the mixture in the refrigerator until it cools completely.

We figured out how to make a slime without PVA glue and starch, but it doesn’t always work out right away as it should. Therefore, we will further consider the options and reasons for why and what to do if the slim turned out to be wrong.

Naturally, a lot depends on the quality of the materials used in the manufacture of slime, their proportions are also important. In the recipes, they are indicated with approximately no accuracy, and therefore you have room for experimenting with the consistency of the slime.

What to do if the homogeneity of the slime is broken? In this case, it is worth kneading it well for several minutes. After that, it will become viscous and homogeneous.

If it is too sticky - it stretches for a spoon with threads, and sticks to the fingers so that it simply does not lag behind - it means that the mixture needs to be thinned a little. A small amount or plain water will help you here, depending on the method of making the slime you have chosen.

It may be the other way around, the mass stretches, but it does not stick to the fingers. The reason in this case is the excess fluid in the slime. If this happens, then you should drain the excess powder solution, starch or water. Or you can add some binder, such as flour. Then again knead the resulting mass.

A small conclusion

Now you know how to make slime without PVA. After you have made a toy, you should make sure that your beloved child does not throw a slime at the wall, otherwise greasy spots will remain on the wallpaper. And from playing with slim on fleecy surfaces, the hairs will stick to the toy.

It is important to know that its shelf life is on average one and a half to two weeks. And between games, the slime should be stored in the refrigerator, but not in the freezer. At the same time, do not forget to place it in a container and close it with a lid or in a plastic bag. This is done so that it does not dry out due to contact with open air.

Also, to extend the life of the slim, it can be wiped with alcohol, removing adhering debris. Do not wash it in the sink - you risk washing the slime down the drain. But if he began to lose his properties, just add a little water to it.

And the main thing to remember: always after playing with a slime, it is necessary to wash your hands and those parts of the body with which it came into contact with soap and water. So that the child does not have an allergic reaction.