Stove for baths and saunas, wood-burning stove, electric stove. Kupper boilers: features and model range Professional installation and installation of stoves, fireplaces, chimneys

Content

1. Design features
2. Types, specifications and reviews
3. Installation and connection

Introduction

In pursuit of versatility, many manufacturers producing heating equipment produce devices that can switch from one type of fuel to another if necessary. The Teplodar company, which released the Kupper universal boiler, was no exception, capable of switching from coal and wood to gas or pellets in the blink of an eye. Our today's review is devoted to a detailed analysis of this model and its varieties.

The Teplodar company has been on the heating equipment market for almost 20 years. During this time, we have gained a lot of experience in creating inexpensive, efficient and reliable equipment. At the moment, its assortment includes more than 100 models of various heating devices, which are among the leaders in the Russian market.

Solid fuel boiler "Cooper" wins customers not only for its versatility, but also for its attractive design, which is quite rare for the domestic market. Let's get to know him better and analyze his distinctive features.

Design features

The heating boiler "Cooper" has a steel case, inside of which there are chambers of the furnace and ash pan, surrounded by a water jacket. To increase the efficiency of heat removal, in the upper part of the boiler, the right and left sides of the heat exchanger are connected by transverse pipes arranged in a checkerboard pattern. The space of the combustion chamber is separated from the pipes by a steel visor. Flue gases do not move directly to the chimney, but go around this obstacle, giving even more energy to the coolant and increasing the efficiency of the boiler. To reduce heat loss, the body is covered with insulating basalt cardboard, on top of which the body panels are located.

Photo 1: The design of a solid fuel boiler from Teplodar "Kupper" OK

"Cooper" can be used in . For convenience of connection to the supply and return lines, branch pipes are located on the right and left walls of the boiler, above and below.

Attention! It is recommended to connect only to the branch pipes on one side. When connecting the supply and return to different sides of the boiler, the heat exchange efficiency in the water circuit is reduced.

To adjust the intensity of combustion in the lower part of the body is a damper. By opening or closing it, you can control the air supply to the furnace. This can be done manually, or you can install an automatic traction control. It measures the temperature in the heat exchanger and adjusts the damper opening according to the set values. This process is mechanical and does not require a power supply.

The Cooper household boiler can maintain a constant temperature in the system between coal or firewood, using electricity. For these purposes, each device has built-in heating elements with a capacity of 6-9 kW.

Back to index

Types, specifications and reviews

The Teplodar company produces several types of Kupper solid fuel boilers. Let's dwell on each of them separately and analyze the features and technical characteristics of each of them.

Boilers "Cooper" OK 15, 20, 30 on wood and coal

Kupper OK are classic solid fuel boilers. In total, three sizes are available with a capacity of 15, 20 and 30 kW. They are able to heat rooms ranging from 150 to 300 m²

Photo 2: Solid fuel heating boiler "Kupper"

Below is a table with their technical characteristics:

A little review from the owner:

I chose for a long time and in the end I decided to buy a Cooper OK 20 boiler in my country house, which has not yet been completed. Heating system with metal-polymer pipes and aluminum radiators. The warm floor is launched by a separate circuit. About 3 tons of coal and about 4 cubic meters of firewood were used on an area of ​​120 square meters during the winter. Considering the inertia of the solid fuel combustion process, I installed a hydraulic separator.

Arkady Ivanovich, Voronezh

Kupper boilers are capable of operating on gas or fuel pellets when the appropriate burners are installed on them, which are also produced by the Teplodar plant.

Boilers "Cooper" with a hob

This series is a modification of the previous one and consists of only two devices for 10 and 18 kW. The main feature is the presence of a cast-iron hob. Not only will you be able to heat your home, but you can also cook food on the stove.

Photo 3: The Cooper boiler from Teplodar with a hob

The main parameters of the models:

Here is what users on the forums say about this modification:

We use the Cooper OVK-18 boiler for heating a two-story production facility. The heating system has 10 radiators on both floors and a heat accumulator. We heat with briquettes from spruce sawdust. 2 packs of 60 rubles each are enough for a day. They tried to heat with coal, the consumption was 1.5-2 buckets per knock at a price of 30 kg of a bag of 220 rubles. During severe frosts, heating elements were connected, and then only 2 kW out of 6.

Elena Vladimirovna, Yekaterinburg

The HVAC series is also ideal for installation in small country houses.

Pellet boiler "Cooper"

It is a boiler of the OK or OVK series with an installed pellet burner APG-25 and a bunker with a control unit. For the operation of equipment for burning fuel pellets, it is necessary to have a power supply. It can be installed without any modifications directly on the existing boiler connected to the heating system.

Photo 4: Automatic pellet boiler "Cooper" with burner APG-25

Below is a comparative description of Cooper boilers with a pellet burner:

Feedback on the operation of the Kupper boiler on fuel pellets:

I connected the APG-25 pellet burner to the OVK-18 boiler. The settings are simple, everything is simple and clear. Electricity consumes 2 kW per day, the consumption of white pellets is 4 kg / hour. The system works flawlessly, the granules do not get stuck. The only downside is that the fan is quite noisy and needs to be replaced.

Vladislav Borisovich, Krasnodar

If your house has already installed a device of the OK or OVK series and there is a reliable supplier of pellets, then you can safely purchase and install pellet equipment from Teplodar.

Gas boiler "Kupper"

The transfer of the boiler from solid fuel to gas is carried out by installing a gas burner AGG-13K or AGG-26K. For these purposes, OK and HVAC boilers are suitable, even if they are already installed and previously worked on wood or coal.

Photo 5: Cooper gas boiler with AGG-26K burner

The cost of boilers with different types of burners:

Attention! Installation and connection of equipment for gas operation must be carried out by certified specialists, and the device itself is subject to registration.

Long-burning boiler "Cooper" Pro

This model is new in 2015. The boiler is able to work longer on wood, thanks to new technical solutions. In addition to the water jacket and pipes inside the furnace, a water-tube grate is implemented. It allows you to more efficiently remove heat from burning fuel. In addition, the secondary air supply has been upgraded. The duration of burning on one load for the Kupper Pro boilers is up to 8 hours. As with other models, it is possible to install a pellet or gas burner.

Photo 6: Boiler "Kupper" About long burning from Teplodar

Specifications:

Inexpensive low-power wood-fired boiler "Cooper" Comfort

The Uyut model is designed for heating small spaces and only one standard size with a capacity of 10 kW is produced. The boiler is designed to work on wood and has an enlarged firebox that allows you to burn long logs. The original shape of the boiler allows the coolant to circulate freely inside the heat exchanger, eliminating the formation of stagnation zones. For ease of maintenance, it is equipped with a capacious ash drawer.

Photo 7: Wood-burning low-power boiler for the house "Cooper" Comfort

The main characteristics of this model:

On Uyut boilers, as well as on all other heating solid fuel boilers Teplodar, it is possible to install equipment for working on gas or fuel pellets.

As you can see, Teplodar offers heating boilers for every taste, the efficiency and safety of which is largely determined by the correct installation, connection and piping. Below we will consider the basic rules for installing Kupper solid fuel boilers.

• Mounting stoves, fireplaces, boilers, chimneys, thermal insulation of walls, floors, waterproofing of the roof during the chimney.
• Implemented construction turnkey baths, saunas.
• Repair and recovery previously installed smoke systems
• Construction of hamams or Turkish baths, Finnish saunas

Why we might be of interest to you:

• Qualified specialists with extensive experience in the construction and decoration of baths, saunas and hammams. Our team of builders-installers has extensive experience in the construction of baths, saunas and hammams. Our portfolio includes a lot of high-quality work on the construction, installation of equipment and finishing of steam rooms.
• Acceptable prices- we always try to meet you and recommend how you can save money without sacrificing quality.
• High quality transparent work. We professionally and responsibly approach any business, we coordinate each step with the client. It is in our interests that the work done would please the customer all the time!
• A wide range of services. It is possible to order a bathhouse, a Finnish sauna, a hammam from us for every taste and wallet, from the simplest and ascetic to the chic and royal - with a turnkey construction and certain types of work. It is also possible to order the finishing of a steam room or the installation of a stove and a chimney, a steam generator and other equipment.
• Minimum deadlines. We complete the work within the stipulated time frame. And we finish everything!
• Maintenance of erected facilities after completion of construction, finishing and installation. After completion of the work, it is possible to call the master for maintenance of the equipment, by agreement.

All work is carried out under the contract.

Call: 8-495-989-40-74
Write: [email protected] website

We will be glad to cooperate with you!

Work examples:

Installation of a fireplace in the house

Gas boiler installation

Installation of a fireplace stove in a wooden house

Universal boilers of the Kupper line are powerful single-circuit heating equipment in a compact design. Due to their efficiency and reliability, Kupper boilers have won the trust of the buyer and firmly occupy a leading position in sales.

Heating boiler for a garage, house or cottage "KUPPER OK 9" heats small rooms up to 90 m2. The boiler is suitable for all types of heating systems.

The boiler "KUPPER OK 9" can operate in different modes on different fuels. The main fuel is wood, coal. The boiler "KUPPER OK 9" is easily converted to work on gas or pellets using burners manufactured by "Teplodar".

Features of the boiler "Kupper OK 9":

The water tube heat exchanger improves heat removal and increases the efficiency of a standard water jacket.
The staggered arrangement of the pipes of the water-tube heat exchanger, in combination with a removable flame deflector plate, increases the course of the flame and completely extinguishes it in the boiler, increasing the efficiency of the boiler.
The power of the boiler is regulated in the range from 30 to 100% by means of an installed automatic draft regulator.
The built-in 6 kW heating element maintains the temperature of the system after the fuel burns out and can work for heating.
The kit includes accessories for cleaning the boiler, a rotary damper, a thermometer to control the temperature of the boiler.

ATTENTION! Chimney elements and draft regulator are not included in the kit and must be purchased separately.

Characteristics

Type of components Boiler

Type of fuel Solid fuel

Chimney diameter, mm 115

Firewood length, mm 320

Efficiency, % 68

Weight of the set, kg 63

power, kWt 9

Heated area, m2 90

Dimensions, mm 645 x 415 x 556

Write a review

Payment

Payment produced only in cash upon receipt of the goods upon self-delivery or to the courier upon delivery.

When buying any product for self-delivery or delivery by courier, cash and sales receipts are provided, as well as, if necessary, certificates.

Payment by non-cash- by agreement .

Pickup

Pickup is available for orders of any size. daily from 9:30 to 18:30 without breaks.

Self-delivery is carried out from a warehouse located at the intersection of 94 km of the Moscow Ring Road and the Yaroslavl Highway, the Trakt-Terminal Trade and Construction Complex, pavilion No. 5, place 26, (5/26).
See the map in the "Contacts" section.

Delivery

For orders of any volume is available as a delivery service.

Delivery of most materials is carried out the next day.

Large orders are fulfilled during the week.

Delivery is carried out from a warehouse located at the intersection of 94 km of the Moscow Ring Road and the Yaroslavl Highway (Trakt-Terminal Trade and Construction Complex).
See the location map in the "Contacts" section.

The cost of delivery is calculated individually based on the volume of the order and mileage.

Delivery within the Moscow Ring Road - 1200 rubles, then - 35 rubles / km. One way mileage calculation. For example, 20 km from Moscow Ring Road = 1200 + 20 km x 35 rubles. = 1900 r.

Delivery is carried out to the entrance. Rise to the floor, skidding into the house and other work are paid separately(by agreement). It is advisable to warn about the need for these works in advance in order to agree on the cost and the required number of loaders.

* - The estimated cost of delivery is calculated, the final cost is determined after receiving the goods at the company's terminal.

Professional installation and installation of stoves, fireplaces, chimneys

Installation of a fireplace stove and chimney is a very important and at the same time individual issue. For an accurate assessment of the labor intensity and cost of work, as well as the elements of the chimney and thermal insulation materials necessary for the installation, it is necessary for the master to visit the site directly. The installer of fireplace stoves will be able to see with his own eyes what he has to do, and the client can discuss all the nuances of the installation.

Why is it necessary to call a measurer to the object as the first step?

The PechiRUS company sells equipment and accessories for baths and saunas. Here you can find bath and sauna stoves (as well as water tanks, heating boilers, sauna stones, etc.) from the world's best manufacturers at very reasonable prices. We work directly with such world famous furnace manufacturers as Harvia, Termofor, Teplodar, Professor Butakov,"Barbara», and therefore we can afford to sell the products of these companies without overpricing. The range includes stoves of various types and designs, a wide choice and a wide range of prices for which will allow you to choose exactly the equipment for your bath that best suits it.

Wood stoves « Harvia » are made exclusively from heat-resistant steel. These stoves are painted with fireproof paint, which guarantees that the stove will keep its presentable appearance for a very long time. The wood stoves we offer are equipped with cast-iron doors with built-in glass, which will allow you to admire the burning process of the fire. Such furnaces have increased heat transfer, are distinguished by their efficiency both in terms of fuel consumed and in terms of space occupied. Furnaces from another world market leader, Kastor, are characterized by their long history and high efficiency, which is achieved through complete afterburning of the fuel. Kastor sauna stoves are made of 8mm heat-resistant steel, glass is built into their doors, which can withstand high heating temperatures. An excellent solution for heating large rooms will be heating stoves - they are designed so that air circulates between the furnace and the wall of the stove, ensuring uniform heating of the entire room. Such furnaces are mainly made of cast iron or refractory steel. We recommend heating stoves"Professor Butakov", as well as "Teplodar" and "Termofor". Russian heating boilers and stoves are already good because they are initially manufactured taking into account the harsh weather conditions of our country, and fully comply with high international quality standards.

The electric sauna heaters offered by our company are environmentally friendly, safe, take up little space and are conveniently adjusted using a remote control. In addition, they are equipped with an overheating fuse and a thermostat. Based on the size of the steam room, the quality of the thermal insulation of the walls and the height of the ceilings, our consultants will help you choose the stove that best suits the given parameters. As an alternative to sauna stoves, infrared emitters are offered to your attention. The difference between an infrared cabin and a regular sauna is that in it the body warms up much deeper, and together with sweat, a greater amount of harmful substances are removed from the body. You can choose infrared emitters " Harvia ”, which are easy to install, pleasant to the touch, environmentally friendly, and have a healing effect on the human body.

Kupper series OK, stands for boiler, not the American “Ok” from abbreviated slang expression okay, as many might think. Boiler Kupper OKuniversal single-circuit unit, able to work on, such as coal or firewood. The device is used in heating residential and industrial facilities ranging in size from 80 to 200 m2.

If necessary, the Kupper OK boiler, in addition to using the main type of fuel, can be transferred to automated operation by reconfiguring the process of obtaining thermal energy from the combustion of gas or pellets using burners manufactured at the Teplodar enterprise. It is especially pleasing that the restructuring is carried out without additional plumbing and welding work, which significantly saves money.

When Kupper OK boilers are equipped with an automatic power control system, a combustion regulator with a control panel can be installed on them, which is connected to the auxiliary heating element unit. Expanding the range, the Novosibirsk company "Teplodar" offers models for rooms up to 180 m2, equipped with a convenient cast-iron hob with an abbreviation in the name Kupper OVK.

Assembly diagram of the installation with a pump

Our review is devoted to solid fuel equipment from the Siberian company Teplodar. We suggest that you familiarize yourself with the main characteristics, device and principles of operation of the Kupper OK heating boiler. The instruction manual and customer reviews will help us with this. The plant produces three main modifications, with the same design and internal elements. The main differences are in the nature of power characteristics:

• Boiler Kupper OK 9 - is used for heating small volumes that do not exceed a heated space of 90 m²
• The Kupper OK 15 boiler is medium in size and is placed in rooms for various purposes with an area of ​​up to 150 m².
• The Kupper OK 20 boiler is the largest in the series, it is operated in any heating system of a construction site up to 200 m² in size.

Features of the boiler Kupper OK

• Manufacturers, in the Kupper OK series, in addition to standard water jacket, a design was proposed insingle-tube heat exchanger, which increased efficiency and was able to improve heat removal.
• The pipe system of the heat exchanger was placed in a checkerboard pattern. The unit was equipped with a removable plate, which acts as a flame arrester, with the help of which the flame stroke was increased and the high flame in the boiler was completely extinguished. Thus, it was possible to prolong combustion and significantly increase the efficiency of the boiler.
• By means of a specially placed automatic draft regulator, it is possible to set the power of the device in the depth of the range from 30 to 100%.
• As the solid fuel burns out, the built-in 6 kW heater unit is put into operation. Such support delays the cooling of the coolant temperature in the system circuit, and under certain conditions it can work for heating in not very frosty periods.
• The device is completed with the accessories allowing to carry out cleaning of a fire chamber. In addition, the kit includes a rotary gate and a thermal thermometer to control the temperature regime of the boiler.

Boiler Kupper HVAC

Since we are talking about creating an independent heating system, and this is precisely the opportunity that solid fuel equipment provides us with, why not expand our capabilities? Probably, the engineers of the company Teplodar reasoned this way, and designed the universal boiler Kupper OVK. Today we can find two models:

1. Boiler Kupper OVK 10 with the ability to heat 100m2 of space, and equipped with a stove with cast iron rings;
2. The Kupper OVK 18 boiler is operated in any heating systems up to 180 m². Equipped with a full-fledged cast-iron stove, expanding functionality and increasing the degree of comfort.

In the absence of the possibility of connecting to citywide communications, the unit allows not only to heat rooms up to 180 m2, but also provides the possibility of cooking on a cast-iron hob. All the features of Kupper boilers described above are applicable to HVAC modifications, including reconfiguration to gas equipment.

Boiler Kupper OK technical specifications

Two connecting fittings are located on the side of the Kupper OK unit. The first one is mounted on top and serves as a connecting pipe for supplying the coolant. The second is located below, which allows you to build a balanced gravity system and ensure a high-quality return flow. The geometry of the location of the fittings helps to connect the device to the heating circuit from any side.

Principle of operation

Having opened the loading door, the owner lays down a solid fuel resource, in the form of firewood, coal stone or peat briquettes, after which the door closes. Having opened the door of the lower chamber, we make kindling. The combustion process is accompanied by an abundant release of thermal energy, which heats the coolant in a tubular heat exchanger and additionally in a “water jacket”

Checkerboard arrangement of the tubular heat exchanger

heated the coolant begins to move under the pressure of natural gravity, or by means of which it is better to install on the return pipe. The resulting flue gases are discharged through a flue pipe with a diameter of 150 mm and a rotary damper into the atmospheric chimney. A series of boilers Kupper OVK 10 has a flue pipe size of 120 mm.

The heat-insulating material is basalt wool located inside the side walls of the boiler. Decorative cladding panels Kupper OK, additionally retain heat and prevent burns from contact with external parts of the device.Thermal insulation with modern, non-combustible material helps to achieve increased efficiency.

Boiler thermostat Kupper KO

With the help of a leaf, which is fixed on the kindling door, it is possible to regulate the intensity of the flame. The power adjustment range is from 30% to 100%. The adjustment can be carried out both manually and with the help of automation. The automatic method is possible after attaching the draft regulator (not supplied as standard and purchased separately). The regulator is mounted on the Kupper OK on the left side of the boiler using a G3 / 4 ″ fitting.

Kupper KO device

We show a schematic arrangement of the main elements with a detailed description in the figure below:

1. combustion chamber;
2. Tubular heat exchanger;
3. Smoke outlet;
4. Encircling water jacket;
5. basalt fiber;
6. Decorative casing;
7. Flame-cutting visor;
8. Supply pipe;
9. return pipe;
10. Plug - adapter;
11. Threaded block heater;
12. loading door;
13. flap;
14. Automatic traction control;
15. grate;
16. Support stand of the grate;
17. Fender damper;
18. Ash collection box;
19. The damper in the chimney is turning;
20. Cast iron hob for HVAC;
21. Cast iron ring.

Kupper OK Specifications

Despite the fact that today the Teplodar company does not release the Kupper OK 30 boiler model, we nevertheless included it in the list with technical characteristics, perhaps the device is still on sale, or the plant will continue their production in the near future.

You can choose a boiler according to the well-known rule: 1 kW heats 10 m2, but since modern construction constantly offers new methods of home insulation, and plastic heat-saving windows are installed everywhere, it is possible that 0.7 kW will be enough for 10 m2. Be that as it may, the correct choice of the boiler is of paramount importance when designing a heating system.

Do not neglect the advice and adequate advice from a qualified expert. You will select the optimal model depending on the size of the heated room, the structural nuances of the object, the type of heating system, fuel resources and coolant, the number and types of radiators, as well as other parameters of the structure.

Boiler Kupper OK Types of fuel

Units of the Kupper series are operated on solid grades of fuel resources. To ensure the most efficient operation of the boiler, the manufacturer recommends using a fuel material with the following characteristics:

• Firewood: section from 40 to 100 mm, length depends on the Kupper OK model and ranges from 300 to 500 mm, humidity should not exceed 20%. The intensity of burning affects the duration of the unit from one load of firewood, and on average lasts from 30 to 90 minutes.
• Coal A: The grain size of the coal stone should not be less than 40mm. Depending on the intensity of burning, the duration of work can reach 8 hours.
• Peat briquettes: the mass fraction of ash should not exceed 16%, the humidity should not exceed 18%;

The room where the Cooper OK boiler is located must be separate from people living. The boiler room must be equipped with an individual chimney and ventilation capable of maintaining a triple air exchange in a period of 60 minutes, taking into account the need for air mass for the combustion process.

Possible malfunctions and their elimination

We have found for you possible malfunctions of the Kupper OK boiler, collected them in one table and give recommendations from the manufacturer to eliminate the causes of breakdowns. If you encounter more complex difficulties, you must contact the service center servicing your purchase.

Boiler Kupper OK advantages

• Excellent value for money and quality workmanship. The increased attention of the manufacturer to the design and a wide range of products allowed Teplodar to take a leading position in the market in Russia, the products enjoy well-deserved success in Belarus, Ukraine, Kazakhstan, Kyrgyzstan;
• Good feedback from the buyers of the product is the result of a technically competent approach of the plant employees to the production process;
• Rigorous selection of suppliers and continuous attention to the needs of homeowners is the basis of the company's policy. A balanced pricing policy allows us to offer the consumer the best quality at a reasonable price;
• The box in which waste ash accumulates is serviced with the kindling door closed;
• Universal Kupper Ok, makes it possible to use a fuel resource in the form of firewood, coal, electricity, and during restructuring - gas and pellets;
• The price is not inferior to quality, the cost of Kupper OK starts from 20,000 rubles;
• Kupper HVAC models are equipped with a cooking stove;
• The catchy design and bright colors attract the eye;
• Excellent thermal insulation with basalt wool.

Minuses

To certain disadvantages, according to consumer reviews, is the fact that the commissioning and maintenance of the unit and all structural elements, as well as the first start-up of the equipment into working condition, is carried out by qualified employees, with a special permit from the manufacturer to service devices of this type.

Although we do not consider this a significant disadvantage, since in the end, these activities affect your safety. Please note that routine maintenance for the launch of the Kupper OK unit is accompanied by the filling in of documents by the trading, installation and maintenance structure. These documents will be required when a warranty case is discovered. You can also add that:

• The series is new and untested for decades;
• The Kupper OK heat exchanger is made of steel, which makes it less durable than cast iron;
• The thermal regulator for a copper and the control panel of the TEN block is not included in the basic package;
• The lack of dual-circuit options is supposed to be used, which will lead to additional costs.