Putty Vetonit (Vetonit) KR and LR differences. The subtleties of using Vetonit LR finishing putty Vetonit LR putty Leroy Merlin

PUTTY WEBER.VETONIT LR+ FINISHING POLYMERIC WHITE, 25KG

Finishing putty white polymer

PURPOSE:

Finishing alignment of walls and ceilings in dry rooms before wallpapering or painting.

BENEFITS:

Super plastic;
Perfectly reduces layers;
Qualitatively sanded;
Absolutely white.

INSTRUCTIONS FOR USE:

Foundation preparation:

The base must be clean, solid and strong. Windows and other untreated surfaces must be carefully protected. Substances that weaken adhesion such as grease, dust, etc. must be removed.

Preparing the mixture:

Gradually pour a bag (25 kg) of dry mixture into a container with 8 - 9 liters of water, while stirring. The recommended water temperature is + 20°С. Mixing should be done with a drill with a nozzle for 3-5 minutes. Let the solution stand for 10 minutes. Then stir the mixture again before use. The mixture is suitable for use 1 day after mixing with water.

Application:

Apply the mixture manually with a steel spatula or spray mechanically. The previous layer of putty must dry before applying the next layer. Grind the working seams and the surface after sufficient drying after 1 day. The hardened mixture is ready for painting or wallpapering.

To increase the wear resistance of the material and improve adhesion to solids, replace 10% mixing water with weber.vetonit MD16.
The weber.vetonit LR+ putty is not waterproof and is not suitable for leveling floors and preparing substrates for tiling.

Working tools and equipment are washed with water immediately after completion of work.

PRECAUTIONARY MEASURES:

When working, rubber gloves must be used;
Avoid contact with skin and eyes;
In case of contact with eyes, rinse with plenty of water;
Keep away from children.

DISPOSAL INSTRUCTIONS:

Dry mix and hardened material must be disposed of as construction waste. The material must not be released into the sewer. Dispose of the paper bag as normal trash.

Product characteristics

Applying the final layer of putty is an indispensable stage of repair, providing a smooth and durable coating of the ceiling and walls. In addition, the surface will acquire uniform hygroscopicity and white color. Of course, the surfaces to be processed must be leveled and dried in advance and with high quality.

We spread putty.

This putty may seem expensive - about $ 20 for 25 kg, however, with proper application and high-quality preparation, it is quite possible to achieve economical consumption - 1 kg per 1.5 m2. Based on this, the required amount of the mixture is taken into account, although the closed Vetonit LR is able to hold out for a couple of days. But then the process of decay begins. By the way, all other finishing putties, in this sense, are much less stored and exude more hydrogen sulfide.

It is desirable to stir using a drill and a mixer, since it is almost impossible to mix with your hands, and, by consistency, the finishing putty should be similar to thick yogurt. By the way, when applying the finishing layer itself, the presence of any grains and lumps in the mixture is unacceptable. In general, the ideal mixture will not turn out immediately, but only after some training.

We apply.

After letting the mixture stand for 5 minutes, mix it again, and you can start applying. The surface to be treated must first be scraped with a spatula, which will help to avoid the appearance of any debris in the mixture.

The mixture should be applied in opposite directions, which will ensure perfect adhesion and filling of all pores. However, the last movements of the spatula in the intended area should be directed in one direction: in this way, the appearing irregularities become guides for the next layer. It is very important, at the same time, to smooth the spread mixture, returning, periodically, to where it was putty a few minutes ago.

As for the number of layers and their thickness, this depends, not least, on the quality of the preliminary surface preparation. Provided that the wall is professionally plastered, two layers of Vetonite are sufficient for subsequent wallpapering. But for painting, you can apply three or more layers, depending on the required quality. An experienced painter, with the right attitude and conditions, is able to prepare about 30 m2 for wallpaper in one day, because the next layer can be applied almost immediately.

The thickness of the layer is regulated by a spatula: if it is placed perpendicular to the wall, the layer will be almost zero. This is called "on the edge". This method is rarely used. Usually, the applied layer is about half a millimeter.

The desire to avoid translucent places can lead to the application of an excessive layer thickness, so you need to remember that, when dry, the putty becomes much whiter and less transparent.

The best results are usually achieved with the use of light directed along the treated surface. It could just be a light bulb with a long wire. This light can show such irregularities that you can just get scared. But these are usually only visual effects. When part of the wall is already plastered, using light, smoothing is performed.

We grind.

Painters usually take sanding seriously - using a directional light and a sanding board, as well as a respirator. In fact, an experienced craftsman tries to avoid sanding altogether, since the layer applied by him is small. Nevertheless, a fine grinding mesh is an indispensable attribute of painting and preparatory work. It is important not to overdo it here, because Vetonit is polished very easily, to the point that it can crumble, and this is a remake. Moreover, sometimes, due to seemingly small shortcomings, the ceilings have to be prepared completely, in a new way.

For orders up to 100 kg, a budget shipping cost is offered (delivery time up to 2 days):

* Drywall, insulation, lumber, profile for plasterboard, foam block and brick are calculated from the table from 100 kg.

**Delivery over 15 km, the calculation is based on the "tariff" + 50 rubles per 1 km.

For orders of 100 kg or more:

* provided that the ordered goods are placed in a passenger car.

** provided that the ordered goods are placed in a truck of the specified tonnage in terms of volume.

Delivery of unsawn 6 meter lumber (board, timber) up to 2 m3 costs from 3 000 rub.

When paying for delivery by bank transfer, 5% is added to the cost of delivery.

Additional requirements to the car, for example, a small height for entering a parking lot or an open body for vertical unloading is paid additionally: + 20% to the cost of the standard fare.

Delivery terms

If possible, the goods are delivered on the day of the order or on any other day convenient for you.

Unloading and lifting cost

Table for calculating the cost of unloading orders:

* The prices in the table are indicated taking into account a working freight elevator, regardless of the floor.

** In the absence of a freight elevator, the cost of the lift is multiplied by the number of floors to the apartment where the goods need to be unloaded.

*** The minimum order value for unloading and lifting is 500 rub.

Important!

The service "Lifting Material" cleaning of the entrance, removal of garbage and other ensuing consequences, after lifting the building material, is not included in the price. Prepare in advance for the service you ordered. Thanks for understanding!

Weber Vetonit LR + finishing putty 25 kg. Vetonit LR+ price per bag, buy with delivery in the online store of building materials.

Vetonit LR plus finishing putty is made using polymer glue. In most cases, such putty is used when finishing walls and ceilings in those rooms where low humidity has been recorded.

Often, "weber vetonit lr plus" is used to level walls, ceilings and other bases that have not previously been deformed for one reason or another. This is usually done before wallpaper is glued to the treated base or paint and varnish products are applied. Typically, such a putty is applied to gypsum, cement and cement-lime bases.

The layer thickness can be no more than 1-5 mm. When applying the Vetonit LR+ finishing putty, a completely white surface is formed, in order to then produce the highest quality wallpapering or painting. It should be ensured that such types of finishing work are carried out exclusively in dry rooms. Otherwise, a positive result will not be achieved even by experienced professionals. Putty can be applied in a variety of ways to the surface to be treated. In practice, this is done manually or mechanically. Also, the presented product is very resistant to moisture, especially when it comes to a short period. If we take into account a layer thickness of 1 mm, then 1.2 kg / m² of consumables will be needed.

When using the finishing putty Weber Vetonit LR+, make sure that the selected base is very hard and completely dry, and free of grease stains. In addition, the entire surface should be checked for any other materials that cause significant adhesion to the substrate. During the finishing work it is recommended to make sure that the actual temperature of the substrate fluctuates between +5°C and +30°C.

In order to prepare the solution yourself, you will need to take a plastic container and pour warm water with a volume of no more than 9 liters per 25 kg of dry mixture, which is subsequently added to the poured liquid. Next, mix the above components until a homogeneous mass is obtained. When performing this action, you need to use a construction mixer, a drill is also suitable. As soon as the solution is ready, it must be consumed during the first day.

Initially, the desired surface should be thoroughly prepared for applying a special solution to it. After that, the putty mortar after application is leveled with a steel two-handed spatula. If a small area is to be processed, then a metal spatula with a width of 30 cm is useful here. After the Vetonit LR + solution has been applied to the surface, it is worth waiting until it dries completely. This is followed by sanding and dusting. Then various decorative materials can be applied to the surface.

Finishing putty Weber Vetonit LR + (Weber Vetonit LR +)

DESCRIPTION:
Finishing putty on a polymer binder for walls and ceilings in dry rooms

PROPERTIES:
- layer thickness 1-5mm
- white surface
- for dry rooms
- finishing puttying for painting and wallpapering
- application both manually and mechanically

PURPOSE:
Alignment of walls and ceilings inside dry rooms before:
- wallpaper sticker,
- painting.

BENEFITS:
Moisture resistant
It is used on all types of smooth surfaces made of mineral materials, previously leveled with weber.vetonit TTT, TT, T, L, V, VH, KR putties or plasters, gypsum boards and painted surfaces, provided that weber.vetonit MD16 is added to the mixing water.

SUBSTRATE PREPARATION:
The substrate must be solid, clean, free of dust and dirt. Substances that weaken adhesion such as grease, dust, etc. must be removed.
The base must be dry. Excessive moisture in the structure can cause yellowing of the leveled surface.
Windows and other untreated surfaces must be carefully protected.

MIX PREPARATION:
Pour approx. 9.0 liters of clean water and pour 25 kg (bag) of weber.vetonit LR + mixture, while the mixture must be added to the water, and not vice versa.
The recommended water temperature is 20°C. Mixing is carried out with a powerful drill with a nozzle for 3-5 minutes. For better dissolution of the binder, the mixture is allowed to stand for 10 minutes. After slight re-mixing, the mixture is ready for use. Mortar mix is ​​suitable for use within 24 hours from the moment of mixing with water.
When storing the finished mixture in a closed container, the putty is suitable for use within 2 days. The temperature of the mortar mixture must be at least +10°C.

APPLICATION:
The mortar mixture is applied by mechanized spraying or manually and leveled with a two-handed steel spatula. For partial leveling use a smaller steel spatula 30 cm wide. When leveling in several layers, it is necessary to apply each subsequent layer on the completely dried previous one. The dried putty surface must be treated with sanding paper and dedusted before applying the next layer. After sanding, the leveled and dried surface can be painted or wallpapered according to the instructions of the manufacturer of these materials, and also left uncovered when creating a rough “fur coat” surface using a mechanized spraying method. To increase the wear resistance of the material and improve adhesion, 10% mixing water can be replaced with weber.vetonit MD16. The weber.vetonit MD16 primer must be applied in the specified manner when applying putty on painted surfaces.

DRYING TIME:
Drying time of one layer of the recommended thickness at +10 °C approx. 2 days, at +20 °C approx. 1 day, with good ventilation.
Drying time depends on layer thickness, ventilation and temperature.

SPECIFICATIONS:
White color
Binder Polymer Adhesive
Water resistance not waterproof
Aggregate limestone
Maximum fraction, mm 0.3
Mixture consumption kg/m2/mm 1.2
Water consumption, l/kg 0.36
Water consumption, l / 25 kg bag 9
Recommended layer thickness (one application), mm 1-5
Time of use from the moment of mixing with water (when stored in a closed container), days 1(2)
Drying time (one layer) at 20°С, days 1

TOOL CLEANING:
Working tools and equipment are washed with water immediately after completion of work.

PRECAUTIONARY MEASURES:
When working, it is necessary to use rubber gloves, avoid contact with skin and eyes, in case of contact with eyes, rinse with plenty of water, keep out of the reach of children.

DISPOSAL INSTRUCTIONS
Dry mix and hardened material must be disposed of as construction waste. The material must not be released into the sewer.
Dispose of the paper bag as normal trash.

PACKAGING:
Paper bag 25 and 5 kg

STORAGE:
18 months from the date of manufacture, if stored in its original packaging in a dry place.