Do-it-yourself table made of rounded logs drawings. Log furniture - an overview of the simplest product options. The process of making a table from logs with your own hands

A massive log table is the perfect solution for decorating any suburban area. With it, you can complement the design of a wooden gazebo in an original way or create a cozy atmosphere in the yard. Log furniture has a lot of advantages. In addition, you can build such a table yourself.

Log tables are quite relevant for country houses. They are installed simply in the yard under a canopy or placed in the house. Such a piece of furniture looks especially beautiful against the background of buildings made of wooden log cabins.

Log tables differ in the shape of the tabletop:

1. Rectangular, long design. At such a table it is convenient to gather not only the whole family, but also invite guests.
2. With rounded edges. The semi-circular shape gives the table an elegant look.
3. Square. This tabletop looks good in small gazebos.

The dimensions of log tables depend on the place of their use and the number of users. A feature of such pieces of furniture is the unusual design of the legs. They can be made both from a round log and from its halves.

Tables are made from rounded logs of various types of wood. Often such material remains after the construction of houses or various garden buildings. From the remains of a tree, you can make a log table with your own hands.

Manufacturing technology

Almost anyone with carpentry skills can build a table out of logs. Before work, you should select suitable logs and prepare tools. It is also necessary to determine what shape and size the table will be.

Tools and materials

To work with wood material, the following tools are required:

• plane;
• a hammer;
• saw;
• chisel;
• axe.

You will also need:

• hacksaw;
• drill with screwdriver function;
• file;
• paint brush.

As a material, you need to choose:

• nails;
• self-tapping screws;
• iron rods with a diameter of 15 mm;
• varnish for wood;
• sandpaper with different spray fractions;
• glue for metal and wood;
• logs;
• smooth hewn boards more than 2 cm thick.

If necessary, you can take a stain to open the tree.

Drawing

Before work, it is required to determine the scheme for laying logs and the dimensions of the table. To make the product correctly, you should use a drawing with the exact parameters of the entire structure.

With one-sided alignment of logs, three-dimensional sketches are performed. Without turning logs, you can use a two-dimensional scheme of all constituent elements.

In the drawing, all the details must match with each other. You can separately make sketches of the length, width and height of the log table.

Log preparation

The material is selected according to the drawing, which indicates all the necessary dimensions of the product. You can build a table of logs without surface treatment. Such a table wakes up to look more rough.

To build a product from hewn wood material, you will need to spend a little time preparing it. To do this, use an ax or a chisel with a hammer to remove all the bark from the tree. In this case, it is required to make the surface of the log as smooth and even as possible.

If a table is supposed to be made of log halves, then it may be necessary to cut along each material. This procedure can be done by yourself using a chainsaw or entrusted to professionals at the sawmill.

To connect wood material, special grooves can be made. But this requires additional tools and skills. There is an easier way - this is turning a small area with a planer at the junction. The width of the flat surface should be more than 3 cm.

To create a beautiful shape, the edges of the lower and upper logs can be cut at the same angle - 45 degrees. All roughness and protrusions are processed with a file to a flat and smooth surface.

After that, holes should be made for installing iron rods. The drill must match the diameter of the selected reinforcement. Holes should only be made at right angles. Their location should be the same in each log. All edges of the wood material are carefully sanded. The surface must be completely smooth.

Assembling a log table

After complete preparation, the logs are assembled into a single structure. The base is set first. An iron rod is installed in the hole made in the lower log. Further, according to the scheme, all drilled elements of the table are fixed to the reinforcement.

After assembly, the protruding rods are sawn off. If the design turned out to be correct, then you can start gluing it with special wood glue. To do this, disassemble and reassemble the structure, smearing all joints with adhesive solution. Then reinforcing rods are inserted into the holes of the bonded logs. Glue is additionally poured into the last remaining visible opening. Such strengthening of the material will give the product additional strength and will avoid loosening of parts during prolonged use.

Ways to fix the tabletop

The table top can be installed in two ways.

First

After assembling the lower structure, you can begin to manufacture the countertop. Most often, logs sawn lengthwise are used as a material for covering a log table. This option is quite practical and reliable.

For the manufacture of such a countertop, it is necessary to evenly cut the prepared and measured-to-size material. After that, it is imperative to perfectly evenly level the sawn surface, and then clean it to a smooth state. The process uses a planer and sandpaper coated with various sizes.

All edges are also processed. With the help of a file, all sharp protrusions are cut off. You can fix the table top with self-tapping screws.

Second

The material of the table top can be chipboard. The chipboard is sawn according to the required dimensions. It is attached with self-tapping screws. For tables larger than one meter, additional supports should be installed, since chipboard can be deformed even under small loads. To do this, a special overlap of timber is installed, on which the material is fixed. To avoid swelling of chipboard from moisture, you can cover the sheets with a special self-adhesive protective film.

Finishing the structure

After the table is fully assembled from logs, you can start varnishing it. Lacquer should only be applied to a clean surface. The coating is carried out in two layers. After each finishing, the protective agent should be allowed to dry completely.

Operation features

Natural wood is particularly susceptible to moisture and solar radiation. Therefore, in order to extend the life of the log table, you should follow some rules for its operation:

• do not place hot objects on the surface of the countertop;
• after use, clean from contaminants;
• periodically update the lacquer coating;
• install a log table under a canopy.

If the table is installed outdoors, then in winter it is recommended to bring it indoors. Before that, be sure to clean it from dirt, dust. The table storage area must be dry and ventilated.

Advantages and disadvantages

A table made of logs fits perfectly into the interior of a summer cottage. Its massiveness creates an atmosphere of coziness and comfort in the yard or garden. Log tables have a lot of advantages:

1. Strength. The product made of logs is quite strong. Such tables can withstand various loads well and are much more practical than wooden furniture made of boards.
2. Aesthetic look. Log tables are often installed in gazebos in summer cottages. They fit perfectly into the interior of the surrounding nature. Log tables match many materials – stone, glass or metal.
3. Material availability. You can make a table from the remaining logs from the construction. For its manufacture, you can also use fallen trees near the site or in the forest.
4. Ease of manufacture. The log table has a simple structure. Using imagination and deciding on the size, you can independently build any structure. To do this, you just need to be able to use wood tools and make the right drawing.
5. Ecological purity of the material. Logs are a natural material that does not contain harmful substances. The use of log tables does not cause an allergic reaction and is completely safe for humans.
6. Long service life. Log tables with proper care can last quite a long time.

The disadvantages include the heavy weight of the product. Also, without a proper protective coating, logs can crack, shrink or swell when exposed to moisture and direct sunlight.

A table made of logs is not only convenient to use, but also perfect for decorating a garden interior. Such furniture made with your own hands will decorate your summer cottage for many years to come.

All photos from the article

If you want to make an unusual place to relax in your country house, backyard or anywhere else, then garden furniture made of logs will help you with this. This option is quite rare, meanwhile it looks great and is very convenient to use. In this article we will look at how to make the simplest products, even if you have never done such work, everything is quite simple, you just need diligence and a tool for.

Advantages of log furniture

The option we are considering has a number of advantages, which should be mentioned:

Important! Despite the fact that the products are made deliberately rough, protective compounds should not be neglected, as they prolong the life of the furniture by at least twice.

Overview of the simplest product options

As noted above, making log furniture with your own hands is very simple, since minimal processing is required. The most important working tool is a chainsaw, if you don’t have one, then it’s better to invite a specialist, the work will be inexpensive, and you won’t incur high costs.

benches

There are many options here, but we will consider the simplest ones, which almost anyone can do, if you master them, you can make more complex designs.

Let's start with the simplest solution:

• A log of sufficiently large thickness is taken, in which a neat flat cut is made on both sides. One will serve as a support, the second will serve as a seat, for all the simplicity of the product, they look very interesting and fit perfectly into the ensemble with a table or are used independently.

To organize a recreation area in the garden, in the country, in the courtyard of a cafe, kindergarten, you can make furniture with your own hands. Garden furniture made of wood looks the most advantageous. Each table, chair, bench, swing, armchair can become a real work of art in the hands of a person striving for beauty. For the manufacture of such furniture, special knowledge of carpentry and some expensive tools are not needed.

Original paths, lush flower beds will always be the pride of the suburban area.

It is enough to stock up materials in the form of logs, boards, stumps. Garden furniture made of logs is not only environmentally friendly, but also always causes a lot of positive emotions for those who see and use it. In addition, it is very practical and not as expensive as, for example, forged furniture.

What materials to use

Schematic of a bird feeder.

Summer cottages often require new solutions from the owners in organizing a vacation spot. Such a solution could be the use of, for example, sawn trees, vines, beams, logs lying around on the farm for the manufacture of various furniture for your summer cottage.

The following tools will help you make furniture from logs with your own hands:

• chainsaw;
• jigsaw;
• chisel;
• bit;
• rasp;
• sandpaper;
• clean brush for applying the solution from the resin;
• nails (do not forget to “bite off” hats in them);
• construction dryer.

Scheme of a sculpture for a garden.

In order to make furniture from logs with your own hands, you will need the following materials:

• logs;
• hemp;
• vine;
• boards;
• means for impregnating wood against decay (antiseptic);
• wood paints;
• figured branches of trees of different thicknesses;
• acetone;
• water.

Back to index

The easiest options for making furniture from logs

Scheme of garden furniture.

If you cut down an adult tree on the territory of your summer cottage, do not rush to cut the log for firewood. It will make great garden furniture. You can get a chic table, chairs with backs or stools, an armchair, a bench, a bench. It is very simple to make country furniture from a log with your own hands. The easiest option is to make a bench. The log should be large enough in diameter so that, when cut into two parts, a seat and back can be obtained. You can put a bench on the stumps, after digging them into the ground. Another good and often used option is four logs. It is necessary to cut out notches in each with a chainsaw. Put two logs on top of each other, and on top - half of the third, intended for the seat. The recess will give stability to the bench, it will not roll down.

You can fasten the back to the seat with boards or logs of a smaller diameter.

According to the same scheme, you can make a chair with a back in the country. Only then the log should be taken of a shorter length. From the sides, for convenience, you can round it.

Diagram of the swing device.

If you are using a softwood log, then additional processing will be required. Other tree species do not need it. In order for you to have a bench in your country house, on which it will not be scary to sit down, the log must be rid of the resin. Mix acetone with water in a ratio of 4 to 1, apply with a clean brush to the wood, wait until it dries completely. The unabsorbed solution must be washed off and dried with a building hair dryer.

To make a table from a log, you need a stump from a fairly mature tree. The older the tree was, the more interesting and noble the table will look. Well, if this stump is in the recreation area of ​​your summer cottage. To this stump, a table top made of polished boards is nailed with nails. It can be made in different shapes and sizes (depending on your taste preferences).

Around this table, you can make hemp chairs from the remaining material. They are perfect for cottages. To do this, you need to cut the log into equal parts. But the length of one block should be such that later it would be comfortable to sit on this chair. Place the blocks around the table, tamping well into the ground. Make a hole in the center of the table to insert an umbrella that will save you from the sweltering heat.

Garden furniture made of logs has become so widespread due to the huge variety of options and ease of manufacture. Your dacha, for example, will become fabulous if you make an armchair out of an old tree that you were going to cut down. To do this, you need to cut a hole in the stump with a chainsaw, remove the bark, sand the surface and cover the product with an antiseptic and varnish.

A bench can be made from a log in the following way: a third of the thickness of the log must be cut off, and the edges should not be touched. They will serve as armrests. You can install such a bench on the legs in the form of logs. Great option for a summer residence.

Garden furniture is all the more interesting, the more unusual you approached its manufacture. Any dacha keeps the secrets of the past. It is unlikely that the household will not find an old wooden chair with a decorative back. Did you find the right one? Take it apart. Attach the backs and legs of the chair to a log of small diameter with nails.

Get a comfortable and functional chair back. An excellent design move is to wrap a log with a rope. It will look very original. You can also invite guests to the dacha.

Summer residents and owners of private houses know firsthand how great it is to enjoy the singing of birds, the chirping of crickets or just a conversation with family and friends at a wonderful table in a cozy outdoor setting. And what could be more soothing and alluring than a romantic dinner with a loved one or just a cup of tea alone in this atmosphere?!..

However, unfortunately, not all owners of such potentially pacifying gazebos and places to relax can boast of a comfortable and durable table that harmoniously complements the necessary environment: someone simply does not have the desire and time to buy it, and someone is limited in money, therefore, he does not even think about acquiring a good table. But there is always a way!

Do you still have logs from the gazebo? Then the issue is resolved! Make a table out of logs with your own hands.

So let's get ready.

How to make a table out of logs with your own hands?

Necessary materials and tools.

1. Log, 30 cm in diameter. By the way, if it is an oak, then a table made of it will serve you for about a century.
2. Impregnation for wood (you can also use stain) - is needed to preserve the tree and prevent it from rotting.
3. Saw with an axe.
4. Chisel and hammer.
5. Chainsaw.
6. Lacquer for wood processing (at the end of the work).

The process of making a table from logs with your own hands.

• First of all, you should consider what exactly you want to see in your house, plot or gazebo. It is better to draw a sketch of the future table.
• Due to the fact that only your own strength is not enough to cut the logs along, find a sawmill and arrange to cut them there.
• Start processing logs. To do this, it is necessary to saw (preferably use a chainsaw) logs into pieces of the required length.
• Next, clean the tree from the bark with a chisel or an ax and a hammer. This will prevent rotting and keep it looking nice. However, refrain from working with a hammer alone, otherwise you will leave a large number of unnecessary notches on the tree, over which you will then have to “sweat” quite a lot, “killing” a lot of time for this.
• If necessary, process the logs with a planer.
• Take the logs to the sawmill for sawing.
• It's time to assemble the table.

Assembly of a table from logs.

The technology for assembling a table from logs with your own hands is quite simple:

1. put the logs parallel to each other in a place prepared in advance for the table;
2. cut semicircular grooves in the center of the top of each log so that the log can lie in this recess;
3. connect the structure with nails or screws;
4. make the top of the tabletop from logs sawn at the sawmill, flat side up, putting them into the already prepared recesses;
5. process and impregnate the finished table.

All photos from the article

It does not happen in nature that all the material, centimeter by centimeter, goes into construction without a trace. Trimmings are sure to remain, sometimes whole beams or logs, which are a pity to burn in furnaces. It is better to find a use for them in the form of home-made country or street furniture.

The most popular, most useful piece of furniture is the table. Any material can be suitable for its manufacture: boards, slabs and even logs. Today in the design we use trimming logs.

From design to execution

Simple design - simple execution.

Let's start with the good news. You will not particularly need drawings of log tables, the reason for this non-trivial approach to the construction of furniture lies precisely in the material. The instruction is very simple.

Logs can be used:

1. For table legs. You can easily connect them to each other by placing them at the corners of the perimeter of a box made of boards. But more on that later.
2. For the manufacture of side racks. It uses the technology of a set of logs for the construction of walls. Often, in this way, combined tables and benches are prepared from a log.
3. For forming countertops. This is a whole layer of material, which involves the use of various techniques and techniques, methods of fastening and much more.

But while we analyze the above, all other ways of using it depend only on your imagination.

The simpler, the more economical

In the photo - a vivid example of the skillful use of wood

Let's analyze the simplest table that even a schoolboy can make with a saw, hammer and nails at hand. This is a variant in which logs are used as legs.

To make it, you will need scraps - in the truest sense of the word.

1. First of all, we prepare a wooden perimeter. For this purpose, you need to connect four boards. As a result of this articulation, a rectangular structure is formed. There are many board mounting options. If you want, connect them with self-tapping screws or nails, if you want, make a spike connection, or if you want, use metal corners;
2. Then four one-dimensional logs are fixed in the corners of the formed perimeter.

F Log fixing is possible in several ways:

• The first and easiest, nail or fix with self-tapping screws;
• The second is to make recesses in the tree in such a way that the log is inserted flush into the corner, forming a single ensemble. This technique is more complicated, as it requires either skill or special equipment.

1. The final stage is the hoisting of the countertop. As - MDF, chipboard, OSB. The table top can be assembled from scraps of boards that went to the crate. The tabletop can even be made from logs, if you dissolve them on a circular, at least into two parts.

Advice! It is clear that such a table has a pronounced street character, so it is better to replace the tiled material with a type-setting table top made of boards. And do not forget to cover the boards with an antiseptic. And ideally stain and varnish.

The table is like a log house

Recently, a type-setting table made of rounded logs has become very popular. At the same time, the technology of its manufacture is no different from building a house. The construction stages are absolutely identical, except that there is no need to put a heater between the logs.

To build this structure, you need:

• Decide on the type of table. Without even going into details, I would like to note that there are a lot of options for a set of tables. There may be mini huts, and side racks in the form of the letter "X", and modern assemblies with various romantic names. To move away from fantasy and tune in a more practical way, let's approach this issue in this way:
• Do you want to build a base in the form of a mini house, where you can place boxes instead of front doors or windows, where you can leave small garden or carpentry tools in summer? Then you need to remember the technology of building a house.

Note! The joining of logs in the corners is carried out similarly to the joining of logs during the construction of a house, using the “into a bowl” method.

• X-shaped bases are easier to recruit, and the need for a previous docking may arise once to give the structure stability;
• Various modern designs involve not only the use of logs, but also tree branches of non-standard lengths and diameters.

A few words about joints.

Docking logs among themselves can be done in three ways:

• With the help of wooden pegs;
• With the help of reinforcement rods;
• Using self-tapping screws of the required length.

If everything is clear with self-tapping screws, then the pegs require some explanation. In the case of them, the lower log is drilled to half, and the rest through. The rods are inserted into the holes in such a way that they expand the prepared hole a little, the principle of a chop or a cork in a bottle.