Sawing souvenirs for the new year. Beautiful Christmas toys made of plywood: we make decorations with our own hands using a jigsaw. What is required from improvised materials

New Year's plywood toys are a great opportunity to show your imagination and bring interesting ideas to life. The cost of such toys is minimal, and the result is not very bad. In addition, such toys have an obvious plus - they do not fight. You can make them for yourself, for a gift or for a school, kindergarten (where there is an eternal shortage of Christmas tree decorations).

Materials:
Plywood
jigsaw
Napkins with a Christmas theme
PVA glue
Acrylic paints
varnish
Wine corks, ice cream sticks
Glue gun
Satin ribbon

Stages of making Christmas toys from plywood

1. First of all, draw the desired fragments on plywood and cut them out with a jigsaw.
For my work, I chose the forms: a Christmas tree, a ball, a heart, a handle, as well as a blank for a house.
It will look no less interesting: a bell, boots, an oval, an asterisk.

The edges of the blanks should be treated with sandpaper. And I almost forgot about the most important thing - we make a hole in the upper part of the blanks.
2. The next step is to cover the blanks with white acrylic paint. The paint can be applied with a brush or sponge. It is enough to cover on one side.
3. After the paint has dried, you can cover the other side of the blanks (with a different or the same color) and make inscriptions with wishes.

4. You can start decorating the front side. The technique we use is called decoupage. The essence is very simple: choose a napkin with the motif you like and carefully cut off the excess around the picture. We stratify the napkin, using only the top layer with a pattern.

We apply it to the workpiece and cover it with a solution (PVA glue + water, ratio 1 to 1) with smoothing movements of the brush. Dry the product.

5. We color the product by choosing the background that is most suitable for the drawing. The edges can be covered with paint of a different color with a sponge.

6. We varnish the finished work in two layers.
7. We thread the ribbon, make a bow and the toy is ready.

And here is another toy - "House". The principle of manufacture is the same, only the design is different.

When the pattern is applied in the upper part, we glue a loop of tape, then ice cream sticks (top and bottom), and glue wine corks cut into several pieces along the edges. All fragments are painted with paint.

We cover the product with varnish and supplement it with snow. In this case, snow is finely chopped polyethylene.

As you can see, everyone can make Christmas toys out of plywood! And if you have difficulties with the manufacture of the blanks themselves, then you should not despair. Before the New Year, ready-made blanks for toys are always sold. And finally, I suggest you watch master classes on New Year's toys from improvised materials:

Christmas crafts are always fun. Let's start decorating a Christmas tree toy from plywood. The main materials for work are a decoupage napkin with the image of gnomes and New Year's gifts, a plywood blank in the form of a ball, and an openwork kitchen napkin. All this can be purchased in special stores for needlework.

What options for creating Christmas tree decorations with your own hands on the eve of the holidays cannot be found on the Internet. These are products made of paper, thread and glue, felt, corrugated paper and old newspapers. In general, there are a lot of materials for making such crafts, and if you have a specific scheme at hand, then in the end everything can be done quickly and easily. In this material, we will give options on how to make New Year's toys from plywood, templates will help you make beautiful New Year's decor elements with your own hands.

If you want to make stylish and beautiful New Year's toys from plywood, you should find high-quality templates and download them in advance. A large number of various templates that are suitable for these purposes can be found directly in this material and immediately downloaded from here to your computer, so that later you can print it on a printer for work or transfer it directly from the screen to a piece of paper. Such a wooden decor looks original, and the design turns out to be interesting and unusual.

Today, wooden toys for decorating the Christmas tree are rather a rarity. But once such decorations were most often used for Christmas decorations. Unfortunately, the tree was replaced by plastics, but even now, despite all the variety of possible options for New Year's crafts, plywood toys still occupy their own special niche.

Advantages of plywood for making toys

Ready-made drawings of plywood toys can be downloaded from this material, but if you are still wondering why you should choose this particular material, then it's time to bring important advantages. First of all, plywood Christmas decorations are extremely rare today, which means it is stylish and incredibly original. Such a Christmas tree decoration will definitely not be found anywhere else and will be one of a kind.

I would also like to note that Christmas tree toys made of wood allow you to decorate the Christmas tree to your liking. Even a child can engage in such skill, and the process itself, not to mention the result, brings a huge amount of positive emotions and vivid impressions. This decor will be relevant then for many years in a row. It is suitable not only for decorating the New Year's beauty, but also for doors and windows, as an independent exclusive gift to relatives and friends.

Another plus of this decor, which cannot be ignored, is durability. Do-it-yourself plywood toys do not break when hit, dropped. They retain their shape even in the most difficult stressful situations, where plastic or glass would have failed long ago.

What is required for needlework

This is not the most common type of manual creativity, as already noted, so you need to carefully prepare for work in advance. In particular, you need a sheet of plywood (you can buy it, you can take scraps of cut sheets that were used in construction).

Also, for work, a jigsaw, manual or electric, must be at hand. You will also need a drill with a set of drills and sandpaper. Plus, in order to bring the toy to mind, you need to buy acrylic paints and acrylic varnish in advance. As an additional decor, you can safely use paper, tinsel trimmings, satin ribbons, and even ready-made New Year and Christmas images.

Master class on creating toys

First, we prepare the blank for decoration. We take white acrylic paint POLYCOLOR and a large foam rubber sponge. We dip the sponge into the paint and with smooth movements we tampon the workpiece. The paint should be applied evenly on both sides of the plywood. If necessary, apply two or three coats of paint.

When the surface is dry, sand the plywood with a piece of fine-grained sandpaper. The workpiece must become absolutely even - this is the main condition for decorating a Christmas tree toy.

Remove the top layer from the napkin and tear out the fragments with gnomes. A white paper field should remain around each figure.

Now you can do decoupage on the prepared plywood surface. Attach a piece of napkin with a dwarf to one side of the balloon. With a small, soft-bristled brush, dip into acrylic lacquer (using HOBBY LINE) and then brush gently over the top of the paper towel. The varnish will quickly saturate the paper and it will stick to the workpiece. So, the varnish will perform two functions: both decoupage glue and protective varnish. After the varnish has dried, glue the fragment on the other side of the workpiece in the same way.

Next, we create lace details on the plywood Christmas tree toy. We put a kitchen lace napkin on top of the decoupage in such a way as to visually imagine where to make the drawing (you can move the napkin until you like the location). With acrylic contours of various colors, put dots in the holes of the napkin.

Choose the color of the contours to your taste, taking into account compatibility with the overall composition (used HOBBY LINE, MARABU, and DECOLA). You can place such a dotted ornament over the entire surface of the Christmas tree toy, or only along some edge.

When the spot painting is dry on both sides, open the decoupage with glossy acrylic varnish. Apply several coats of varnish and dry each one thoroughly.

Hook a ribbon or thick thread into the hole in the blank and hang the plywood toy on the Christmas tree. Gnomes with gifts rush to the New Year together with

From time to time, hobbies, forgotten for a while, return to our lives. For example, now at the peak of popularity is the manufacture of toys with their own hands.

Of particular interest are movable toys made of plywood, especially since the price of a finished toy will pleasantly please you, inspiring you to create new masterpieces.

Why is this needed?

Quite often, manufacturing from a hobby turns into a profitable business.

Original colorful toys use as:

home interior decoration;
decor for a personal plot and flower beds;
as souvenirs;
in the form of safe (environmentally friendly) educational toys.

Plywood is an inexpensive material, with the acquisition of which there will be no problems. Having mastered the basics, you will easily be guided in choosing the thickness of the sheets for a particular toy.

Having a small weight and thickness, plywood is strong enough to withstand heavy loads.

The qualitative characteristics of the material allow you to create toys of various levels of complexity and sizes:

doll and children's furniture;
houses;
constructors;
original New Year's toys decorated with carvings.

If you decide to make a toy with your own hands, you need to start with the simplest product. As you gain practical experience, you will be able to complicate the task.

First of all, you need to prepare do-it-yourself plywood toy patterns. This is the basis, on the quality of which the external characteristics and functionality of the toy depend. The drawing must be made in real scale, thus, it will be possible to avoid errors and inaccuracies.

After you are convinced that the drawing is perfect, transfer it to cardboard or paper. The next step is to transfer the image to plywood.

What do you need to work

Instruments

For this exciting activity, you will need an initial set of tools, but their quality must be impeccable:

a circular saw;
jigsaw;
sandpaper;
Circular Saw.

Savings on tools can result in under-polished edges that can cause injury.

After the drawings of plywood toys are transferred to the base, you can get to work:

for straight cuts, use a circular saw;
for curved - disk.
for excessively curved lines - a jigsaw.

Auxiliary elements

Having prepared all the details, you can start assembling the toy.

For this purpose, you will need auxiliary materials:

screws;
nails;
wood glue.

To ensure the strength and functionality of the toy, we use screws and nails, for small parts that should not move - glue. When assembling, it must be remembered that the metal fasteners must merge with the surface.

Advice. Before proceeding with the manufacture of the product, prepare a place where you can work freely.
Success largely depends on the ability to focus and move freely without fear of knocking over or scratching something.

It is easiest to consider the whole process of work on a specific example.

Making toys

Bee

Even when choosing a material, you should pay attention to the presence of obvious defects:

knots;
dents;

Before proceeding with the transfer of the drawing to plywood, it must be carefully cleaned with a coarse-grained grater, polished with fine sandpaper. On a perfectly flat surface, it is extremely easy to transfer the image with a soft, simple pencil.

In order for you to feel comfortable during the polishing process, it is recommended to wrap the bar with sandpaper. Translate the drawing slowly, after attaching it with buttons to the base.

Tip: For beginners, special attention should be paid to posture, the accuracy of your movements depends on this, respectively, the final result.

For sawing, you need to be patient, even or, on the contrary, curved lines are obtained after acquiring practical skills. Finished parts must be re-sanded using fine-grained sandpaper.

As a rule, the first crafts are made using ready-made drawings, which consistently indicate the assembly process.

Connect the parts in strict accordance with the instructions. The properties of the material allow you to correct the shape of the parts when deviations are detected during the assembly process, most importantly, do not rush.

Advice. It is necessary to grind plywood exclusively along the layers, the surface must be perfect, glossy-matte, you will experience a pleasant sensation when touched.

Production of dynamic toys

Representatives of different generations are genuinely interested in children's dynamic toys, to the production of which you can safely proceed, having mastered the basic skills of working with material and tools.

As an example, consider one of the most popular options: a duck that will tap its paws in the process of movement.

You will need:

drawing and a simple pencil for transferring to the base;
plywood sheet, optimal size A4;
a stick 80 cm long with a diameter of 7 mm, a ball - 50 mm.

Manufacturing process:

You can print the template on a printer with resizing, apply on a previously prepared surface. (see also )
With a jigsaw, cut out the wheels and duck. It should be cut carefully, the results of haste and sudden movements are quite difficult to correct.
With fine sandpaper, carefully grind the finished parts, especially the edges. Skillful use of sandpaper allows you to correct mistakes made in the sawing process, the irregularities become invisible.
For the production of dynamic toys, in addition to the standard set of tools mentioned above, it is necessary to prepare a drill.
In this case, you need to drill a hole in the tail area for attaching the wheels.
The final step is to color the craft, when choosing colors, you can give free rein to your fantasies.

In principle, if you act in accordance with the instructions and drawings that are attached to the model you are interested in, there will be no problems, but it is still recommended to start from the elementary.

New Year's plywood toy

DIY Christmas toys are especially in demand recently, the demand for them is growing due to the return of fashion for handicrafts.

To make them, you will need a sheet of plywood, a set of tools, bright colors and all kinds of decorative elements: lace, beads, pieces of fabric or leather, glue. A lot of templates are presented on the Internet, but individuality is valued in handmade products, give free rein to your creative fantasies.

After transferring the image to plywood, carefully cut out the desired shape with a jigsaw, the work is quite painstaking, since in most cases the toys are quite compact.

After the drill, make a small hole for the tape or thread, now you can safely proceed to the decorative finish. Bright colors (acrylic, gouache) will give the craft a special festive look, patterns made by burning in combination with lacquer coating - an imitation of antiquity.

The subtleties that you need to learn to create quality crafts

When attaching carbon paper to plywood, you should position buttons or studs so that you can easily lift the drawing to control image quality.
Lay the thinnest elements along the location of the fibers to increase their strength.
When should not move exactly along the lines, but pass next to it, from the outside.
The diameter of the hole should be slightly larger than the studs used for them to rotate freely.
Don't drive the nails in completely, you may need to transfer certain details to improve the model.

Conclusion

You can find a variety of drawings of plywood toys with a jigsaw on the Internet and use them at your discretion. If you have questions in the process of making toys, watch the video in this article.