Christmas tree foam toy. Christmas tree toy Master class New Year Application Master class New Year's toys made of sequins Beads English pin Sequins rhinestones Styrofoam. How to make New Year's volume foam balls with a child:

Polyurethane foam is a unique building material that is widely used for mounting, sealing structures and increasing their thermal insulation. Lovers of garden decorations have expanded the scope of this building material. Do-it-yourself garden figures from mounting foam can be easily made by every owner of a country house or summer cottage. In this article, you can see photos of finished crafts, as well as step-by-step master classes of popular foam sculptures.

1. Light weight.
2. Ease of use (applied to any surface, easy to cut).
3. Ability to make crafts of any size.
4. The finished product is not affected by precipitation and temperature changes.

Terms of use of mounting foam for garden sculptures

Terms of use of mounting foam for garden sculptures

If you have never worked with mounting foam, we recommend that you read the instructions from the manufacturer. Do not forget that the foam inside the balloon is a liquid mass, and when it comes into contact with air, it begins to harden. Complete solidification occurs after 10-12 hours. When working with foam, use personal protective equipment. It is not advised to carry out work at sub-zero air temperatures.

Shake the can well before each use of the mounting foam. During operation, hold the can with the cap down so that the gas does not escape from it and all the foam can be used. Do not immediately apply many layers, as the uncured will fall off. Do everything gradually, apply the next layer at least 10-15 minutes after the previous one. For ease of application, use a special gun.

The appearance of the polyurethane foam figure directly depends on the type of frame. You should first find a picture of the figure or make a sketch to take into account all the nuances and the finished product looked like a wooden or plaster sculpture.

For the manufacture of the frame, you can take different materials, for example, plastic bottles or iron cans are suitable. You will also need wooden planks, rebar and wire. To make the sculpture stable, you need to fill it with sand.

Now you can start decorating crafts with mounting foam. Evenly distribute the foam over the frame, taking into account the future reliefs of the craft. When it completely hardens, it will be possible to remove unnecessary parts with a clerical knife and correct defects. If necessary, add foam to places where you forgot or want to fix something in the craft.

A layer of putty will help protect the mounting foam from destruction. To make the garden crafts smooth, grout with sandpaper. Now take acrylic paints and cover the figure. Preferably two layers or more. To prolong the life of the future masterpiece, it is varnished on top.

Garden figures can be additionally decorated with a variety of materials, for example, beads, flowers, or LED lighting can be made so that the sculpture glows at night.

To make a garden snail, you will need half a can of foam. Cover the table with oilcloth and start applying foam for the base of the snail. When the first layer dries a little, apply a second one and insert a kefir bottle in order to make a snail's neck. Cover the neck with foam too and shape the head with your hands.

Make snail horns and a slightly elongated muzzle. After that, you can start making the shell. To do this, a round hill of foam is applied to the body of the snail. Now insert a bucket that will be designed for flowers and turn the garden craft into an original flower bed.

With a marker, mark where your snail shell begins and ends, and make curls. When the foam is completely dry, sand the product. It remains to decorate the snail and the garden craft is ready.

Materials:
- an old saucepan;
- iron can:
- oil or acrylic paint;
- foam bottle;
- wire;
- beads.

1. Separately fill the pot and jar with foam and let dry.
2. The jar is the head, and the pan is the body of the frog. Fasten these parts with wire and fix with foam.

3. In the place where the frog handles should be, fix the wire and also cover it with mounting foam.
4. Now shape the head and torso to look like a frog. Make the lower legs as well.
5. Paint the craft with paints and then insert the eyes. The frog is ready, now it can be placed near the pond in the garden or near the pool.

To make a garden fox figurine, you will need a plastic bottle. Fill it with sand or pebbles, then the wind will not be able to turn your product over. Foam the bottle, but not immediately with a thick layer, but gradually, pausing for about 15 minutes to set the foam.

For the manufacture of paws, you can use a rubber tube. To make the paws flexible, insert a wire into the tube. The tail can also be made from a tube, which will need to be well lathered. For the neck, use a cardboard cylinder from under the toilet paper. Install some kind of round blank for the head on it.

Propene everything well and give the sculpture the appearance of a fox. After that, paint the figure with oil paints and varnish. Keep in mind that if the paint is white, then the varnish will give it yellowness.

A plastic ball can be used as the frame of the kolobok. Place it on some kind of support, such as a jar or bowl. Apply foam now, waiting for each layer to dry. To make handles, insert wire.

Also form a scarf out of foam, and you can make ears out of cardboard. When the foam is completely dry, cut out the eyes, mouth and nose with a clerical knife. Make the legs out of wooden boards. It remains to color the craft and the gingerbread man - ready!

It is interesting that not only garden figures can be made from polyurethane foam, but also an original lantern that will give your backyard a touch of exclusivity and help design a garden in the Japanese style. To make a lantern stand, take a pipe that needs to be foamed from the bottom side and set on a flat wooden base. For the bowl of the lantern, you can use a plastic bowl, which must be fixed on top.

Now pour the foam in layers, waiting for the partial drying of each layer. Come up with a picture for the design of the lantern, draw a diagram and embody the idea with the help of mounting foam. Make a hole in the center of the bowl so that you can secure the lid with screws. Insert the bars into the bowl and froth them.

Attach the lid to the bowl with screws. Now cut out a smaller square from the chipboard. On one side, foam it, and on the other, fix the racks. In the center of the squares, you need to make a hole in order to insert a solar-powered lamp into it later. Hide the wires.

After that, a roof is made from a large piece of plywood, which is installed on racks. To make the relief pattern beautiful, first draw it with a marker on the surface of the lantern, and then gently cover it with foam.

Garden figures from polyurethane foam master class

The finished product is completely painted. To install it in the garden, you need to dig a pipe into the ground a little or make a small flower bed around the lantern.

Do-it-yourself polyurethane foam figures will help transform any garden plot. Even without the skills of a sculptor and artist, you can make a beautiful sculpture that will enliven your exterior.

Foam crafts can also be used to decorate rooms or building facades.

Crafts from polyurethane foam can be made with your own hands in just a few hours.

If you have a disposable tank that hasn't run out yet, why not use it for the benefit of landscaping.

In this case, it is still better to resort to professional foam, and not household foam, since a small gun with a diameter of 2 mm is added to it.

Unusually simple and beautiful figurines made of polyurethane foam will become the property of your site. They will not leave indifferent either neighbors or just people passing by.

Materials for fakes from polyurethane foam

You will need:

• gloves;
• sprayer with pre-prepared water;
• polyethylene;
• aviation kerosene.

Kerosene is needed so that, upon completion of work with mounting foam, hands can be easily washed from building material.

Something will also come in handy for creating the basis for crafts from polyurethane foam with your own hands.

You can take an ordinary plastic bottle, an old pan or something else, which is not a pity.

With foam covering the auxiliary material, the creation of crafts will begin ...

You need to paint them carefully, and before carrying out this procedure
dry thoroughly in the shade. Drying takes at least a week, but if the foam layer is large, it is better to wait longer.

The paint is applied to the craft from mounting foam with your own hands every spring again. If this is not done, the foam may crack and the craft will deteriorate.

Foam craft ideas

If your site has a small pond, you can make a large green toad. This is especially true where many plants grow, especially large-leaved ones. In some cases, it is easier to make a lizard or a crocodile - who can do what.

In order not to miscalculate with the sizes and “fill your hand”, you can practice on plasticine. No matter how strange it may sound, but it is after testing on this simple material that it turns out to make chic crafts from polyurethane foam.

The same goes for the dough - if you like to bake delicious buns, pat animals - this will help you figure out what you can do better.

A great solution is to make turtles out of polyurethane foam. And it is not at all necessary to have a reservoir on the site. In addition, almost everyone has white paint, and it is now cheaper than colored ones.

Turtles are easier to dye, their shells can be alternated with natural ones. If, during the creation of the craft, bumps appeared that should not be, they can be cut off with a sharp knife.

Similarly, the situation will be with rounded details - if they need to be sharpened, the excess is simply cut off.

Crafts from polyurethane foam not only decorate street views, they can also be made for the home. Funny frogs will bring smiles to people passing by!

So, as an original New Year's decor, you can make a snowman out of foam, but you need to start creating in advance so that the material has time to dry well.

If you paint over the foam ahead of time, it will quickly crack.

Instructions for the manufacture of foam balls and polyurethane foam.

To decorate a Christmas tree, it is not necessary to purchase expensive toys. The fact is that now even inexpensive plastic jewelry costs decently enough. At the same time, such products can be made independently. To do this, it is enough to show a little creativity and spend your time. One of the options for making Christmas balls is to use polyurethane foam or regular foam.

How to make New Year's volume foam balls with a child: step by step instructions, description, photo

The fact is that foam balls in big cities are sold in decor stores and where flower bouquets are sold. But in small towns, such products are in short supply, they are simply not brought there. Therefore, if you are engaged in needlework and want to make beautiful Christmas tree decorations with your own hands, you will have to make a ball of polystyrene foam or polyurethane foam yourself. Later, Christmas decorations can be made from this base.

Instruction:

• To make a Styrofoam ball, you will need a piece of material slightly larger than the diameter of your Styrofoam ball. Now take the pipe that you have available. The diameter of the pipe depends on what size ball you want. If you plan to make small Christmas decorations, then the remains of the container from the mounting foam will do. If you want larger toys, use long sewer pipes.
• It is necessary that the thickness of the bar be slightly larger than the desired diameter of the ball and the diameter of the pipe. Place the pipe on a piece of styrofoam and circle it with a marker. Cut along the marked lines using a utility knife or drywall cutter.
• Now take care of the pipe. You need to cut a hole in the pipe so that half remains. That is, now we need to use sandpaper and glue it inside the pipe. It is necessary that the sandpaper fits snugly against the walls of the pipe. You can glue it with a glue gun or liquid nails.
• Once you've made a bead making machine, place the piece of styrofoam inside and rub it on all sides. This way you will make its surfaces smooth. To round your cylinder, rotate it from side to side. You must turn your cylinder into a ball. Such a blank can be decorated. The decor is made according to your desire and idea.

VIDEO: Machine for foam balls

How to make New Year's balloons from polyurethane foam: step by step instructions, description, photo

You can make Christmas balls from polyurethane foam.

Instruction:

• To do this, you need to make a bundle or use a ready-made cup of sour cream.
• It is better if it is a glass of small volume, but of a sufficiently large diameter. Fill the cup with mounting foam to the top.
• Form a hill at the top. After the foam has hardened, remove the product from the cup. Cut off the part that will be a semicircle.
• Repeat the manipulation, and now glue the two halves of the ball. All irregularities can be smoothed out with sandpaper or a clerical knife.

How to decorate Christmas tree foam balls and polyurethane foam: design ideas, description, photo

Now you have blanks of balls from polyurethane foam or polystyrene. You can start decorating them. For decoration, you can use sequins, cones, acorns, lace, a variety of paints, as well as broken old Christmas toys.

Decoration options:

• Shine. Use body or nail glitter
• Stones. You can buy them at the fabric and accessories store.
• Lace. It is best to take elastic
• sprigs of artificial spruce
• Artificial flowers
• Acrylic paints
• Decoupage with napkins

Ideas for beautiful DIY Christmas balls made of polystyrene foam and polyurethane foam: photo

Below are the most spectacular options for New Year's balls made of polyurethane foam and polystyrene. Take the idea you like and bring it to life.

Making Christmas balls from improvised materials is very simple. The main desire and a little time.

The New Year is just around the corner and, therefore, it's time to prepare New Year's gifts and decorations. And who is the main character on New Year's Eve?

That's right, even children know this. It's Santa Claus! And so I decided to make a figurine of Santa Claus for a child in the garden, so that it would stand on the street, on the playground. I must say right away that I made this sculpture last year and it has already successfully passed the test in winter, frost and children, and this year it will delight us with its presence again :)
From what I will make the figure of Santa Claus, I knew right away: from polyurethane foam. Firstly, it is quite budgetary (considering the size of Frost - 115 cm), secondly, it is quite fast, since the foam dries for 15-20 minutes and the next layer can be applied, thirdly, products made from polyurethane foam are light and are not afraid of any weather conditions, with one caveat - the foam must be well isolated from sunlight and moisture. Under the influence of direct sunlight, the foam turns yellow and collapses, and if water gets inside the figurine, then during frost it crystallizes and the figurine can “tear”. How to avoid all this and make a figurine that will last more than one year, I will tell below, in my master class.
So, stock up on patience and a vacuum cleaner, as the work is quite dirty and dusty.
First, I found on the Internet a picture of Frost, which we will do. We need a general view, we will make our own details.

As a basis, I took a plastic bottle, which was available, poured sand with stones inside for stability (in fact, this could not be done, it is already great) and inserted a wooden stick from a children's shovel on top.
It turned out the frame of the future figure.

Then we take newspapers and begin to add volume to our blank. We fix newspapers with paper tape.

When we collect the required volume with a newspaper, we glue the entire blank with kraft paper on top: it will be easier to apply foam later.
When everything dries up, we take the foam and continue to add volume to our Grandfather. When working with foam, I advise you to use gloves, since the foam is very difficult to wash off the skin, and it does not wash off clothes at all. The floor must also be covered with newspapers or film.
When working with foam, I use a special gun (pictured), which allows you to adjust the flow of foam and reduce its consumption. Thin layers of foam should be applied: this way they dry faster and the next layer can be applied.


We continue to apply the foam layer by layer. Try to keep as few gaps and gaps as possible. If you apply a lot of foam at once, then greatly increasing in volume, it becomes empty inside. And when we then cut off the excess foam, we will have to fill these holes with fresh foam.
At the bottom of the sculpture, we glue the cardboard and also foam it. Unfortunately, I did not film this moment, but I think that everything is clear anyway. If you don't understand, ask, I'll be happy to answer.

Having collected the required volume on our Frost, we begin to move on to the details. We outline the face, very roughly, the place of the cap and begin to make the collar of the fur coat. To do this, take a thick cardboard or, as in my case, a calendar cover, and fix it in place with masking tape. After that, we begin to apply foam to the cardboard collar.


When all parts of the figure are completely filled in and look a little like Santa Claus, we take a mock-up or construction knife and begin to cut off everything superfluous. Knife blades must be sharp to make clean cuts. Foam dulls them very quickly and therefore they need to be changed quite often. If suddenly we cut off too much or didn’t like something, you can always increase the volume again and cut off the excess again. This work is not very fast, but very creative.


Gradually we move from the general to the particular. We draw the details, we pay special attention to the face of Santa Claus, his beard. Fill large cavities with foam.

When the result suits you, you can sand the sculpture of Frost a little: the foam is perfectly skinned.
Then we apply acrylic putty. You can apply with a brush, but I applied directly with my hands: it turns out much faster. We applied one layer - dried it, sanded it a little and applied the second layer. From the first time it is difficult to close all the holes in the foam. It is very important to isolate the foam well from direct exposure to light and water, as I said above.
We sand the second layer more carefully. Perfect smoothness still cannot be achieved, but we don’t need to. After painting, the irregularities on the fur coat and hat look like astrakhan fur. The face should be given more attention: more carefully fill all the bumps with putty and sand well. On the beard and mustache, draw hairs and strands with a toothpick.

It's time for painting. First, I painted all of Santa Claus with white acrylic paint. Then, those places that should remain white, I sealed with masking tape. For coloring a fur coat and a hat, I used car enamel in a can. I didn’t like it very much: a rather strong smell that disappears for a long time and plus it dries for a long time. Longer than just acrylic spray paint. I usually paint with Bosco, which is my favorite.
One bottle of car enamel was enough for me to cover 2 times.
The only plus of this paint: rich red-cherry color. Another important point: it did not fit well on white acrylic paint and went craquelure. Of course, it turned out to be original in the end, but unplanned. This has never happened with Bosco.

Here is such a beautiful craquelure turned out.


This is what Frost looks like after painting.

Now it needs to be spruced up a bit. We take a white lacquer marker, you can acrylic paint and a thin brush, you can contour, and we begin to apply patterns on Frost's fur coat.


Then I started painting the face. First I mixed umber + pink + ivory and applied it on my face. I covered the mustache, beard and edge on the hat and fur coat with mother-of-pearl silver: it turned out to be a real frost. The photo does not convey this, unfortunately. Then, on the beard and mustache, I applied a little black acrylic, diluted to a state of water. Wiped off excess with a dry cloth.

Then I drew the eyes and applied blush to the cheeks. True, I again got carried away and did not photograph the intermediate stages of work.
When everything was dry, I covered it with several layers of acrylic spray varnish, paying particular attention to the bottom.


Grandfather turned out to be quite weighty and stable and I had to take him to the garden by car :) The children were happy!

This year I plan to make a figurine of a deer and a sleigh so that grandfather can safely travel and deliver gifts to the children.

Christmas decorations should be especially bright and colorful - most of us will agree with this statement. While looking for interesting material that can be used for crafts, I came across sequins and was amazed at the variety that hardware stores offer. All kinds of shapes and colors give scope to the imagination. As a result of a trip to this store, an interesting idea appeared that attracts not only with its simplicity of execution, but also with a strikingly attractive result. So, we begin our master class on making Christmas decorations from sequins.
In the process of work, we will need: sequins of various shapes and colors, needles with a hat, foil, a ball of construction foam, the manufacture of which was described in one of the previous master classes.

For my toy, I took white sequins in the form of snowflakes, purple sequins - flowers, convex pink sequins, purple foil and needles with pearl heads. We will mount all this on a workpiece - a ball of construction foam, 6 cm in diameter.

First of all, wrap the workpiece with foil and level it. Then we start a set of sequins on the needle, while placing our sequins in the following sequence: first a snowflake, then a pink sequin, and then purple. It remains only to attach the pin to the ball as it is done in the photo above.

Carefully fill the entire surface of the ball, while trying to keep the gaps to a minimum. You can, of course, go with one set of straws to another, but then you should make sure that all snowflakes are at an equal distance from each other.

So our Christmas toy is ready. Isn't it so simple?!