How and from what to make a snow scraper with your own hands? Do-it-yourself snowplow: a worthy alternative to factory models How to make a do-it-yourself snow pusher

Today I want to talk about another handmade product - the Breeze snow blower. After all, it is winter and the issue of clearing the territory of snow is very relevant. Yes, and in the summer it is no less important because, as they say: the sleigh needs to be prepared in the summer, and the cart in the winter.

How to make a manual snow blower with your own hands

What is this snow blower? This is a three-wheel design with a bucket, which significantly saves your efforts when clearing snow.

Let's go straight to the main points. That is, this bucket is 50 cm wide. and 40 cm high. The bucket can be adjusted both in height and in the angle of inclination of the blade. This adjustment is made taking into account the fact that the snow can be fresh or long-stale. A rubber cushion is attached to the bottom of the bucket, which allows you to remove snow from soft to caked.

The height of the bucket is adjustable from the side of the snow blower operator. It is very easy to adjust, near the operator there is a gear with fixation (dog), removing it from you, the bucket lies on the ground under its own weight. If you need to lift it, you lift it to the desired height and fix it with a dog. In other words, they caught the desired height, fixed it, and it will not go anywhere. The angle of its inclination is maintained by its own gravity.

The blade is adjustable with two rods, it can be either left or right. The angles near the bucket are about 20 degrees and if the snow needs to be moved to the right, then you correct the blade to the right and vice versa. Having fixed the blade with your finger, you can go further.

The design is very easy to move. The snow blower is on three wheels. One wheel on a movable hinge, which allows the structure to turn on the spot.

Another advantage is the presence of solid wheels with rubber tires on the snow blower, which saves you from pumping pneumatic tires.

A platform on a wheelbase allows you to put a shovel, broom, bucket there - very convenient if you work in a public service.

The handle is made of heat-insulating materials, which prevents hands from freezing in cold weather.

I hope you enjoyed this homemade snow blower. If you make it for yourself, I'm sure you won't regret it.

Despite all the talk about global warming, winters in most regions of our country continue to be severe, so it is not uncommon for heavy snowfall to impede the movement of vehicles and even the movement of passers-by in courtyards and streets. This issue is especially relevant for owners of cottages or country houses, since they have to rely only on their own strength. Of course, you can buy a mini snowplow, but not everyone can afford it. In addition, sometimes its use is difficult and even impossible, so the snow scraper continues to be a popular tool.

How to choose

Today in stores you can find a variety of scrapers for cleaning sidewalks, yards and steps. They are mechanical and manual. If you are not ready for big expenses, then you will have to purchase a manual scraper. It is often called in the English manner a pusher or a scraper, emphasizing the main purpose of this product - to push and scrape. Regardless of whether we are talking about a store product or deciding how to make a snow scraper with your own hands, it should be:

light;
durable;
having a comfortable non-slip handle made of a material with poor thermal conductivity, which will prevent freezing of the hands of the person performing the cleaning.

From what has been said, it is clear that when choosing a snow scraper, it is better to pay attention to options made of plastic or aluminum, as they are durable and at the same time light. In this case, the one who will be cleaning will get tired less, and the likelihood that the device will break will be reduced to zero. In addition, it is desirable that the handle be covered with rubber to prevent slipping of the hands, and the height of the tool should correspond to the height of the person who will use it, since working in a hunched position is not particularly convenient.

DIY snow scraper (shovel type)

Everything said about the choice of such devices in the store applies to homemade tools for cleaning the yard or sidewalks. The easiest way to make a manual scraper that resembles a shovel. For its manufacture, you can use an ordinary aluminum sheet 40-50 cm in size, bent along the upper edge so that a side 4-5 cm high is formed. You can also bend the side sides, and make the handle in the form of a frame, which happens with a garden wheelbarrow.

wooden scraper

To make a do-it-yourself snow scraper with sides from a pine board measuring 210x23x2.5 cm, you will also need a rail of the same material 280 long, 8 wide, and 2.5 cm thick. You will also need to use a sheet of galvanized iron measuring 73 by 70 cm

Instead of a rail, a round handle of an old shovel is also suitable as a handle for a scraper. Moreover, the width and length of the scraper can be taken different from those indicated, taking into account the fact that the device must pass freely through the gate.

The bottom of the scraper is made from an iron sheet, to which the sides cut from the board are attached with screws or self-tapping screws. Such a tool can also come in handy in the spring, because by adding wheels from a baby stroller to it and reinforcing the bottom with wooden slats, you can turn it into a light wheelbarrow for removing sawdust and debris. In this case, the wheel axle must be placed between 2 boards and secured on 2 sides with metal plates.

Scraper on wheels

Rolling is always easier than dragging. Having guessed this, our distant ancestors invented wheels. They can also be used to facilitate the process of removing snow with a manual scraper. For the manufacture of such a modernized device, you will need a plastic or aluminum pipe with a diameter of 27 cm, from which you need to cut a sector with a side length 2-3 cm less than the circumference of the section. The result is a part that will be used as a blade. As for the frame, an old baby stroller will come in handy to create it, which is sure to be found in any home where there are preschoolers or schoolchildren. You will also need to get old water pipes. Next, you need to perform the following operations:

create slots in the pipes on one side for the axle of the wheels, and on the other, weld them to the blade;
from metal corners to make ears for fastening racks;
make 3 holes in the top of the racks so that you can control the height of the handle;
if you intend to use such a homemade scraper for removing snow on asphalt, then you can attach a protective conveyor belt to the lower edge of the blade;
paint the scraper to protect the metal from corrosion and give the tool a finished presentable look.

Such a product will be a great helper, as it is convenient to use and does not scratch the road surface. In addition, it can be adjusted in height to suit the user.

Homemade snow scraper on skids: what you need

Wheels are not the only way to make the scraper easier to move. It will be easy to move if you install the blade on the skids.

To make such a useful device you will need:

metal, preferably aluminum sheet measuring 800 by 1500 mm;
thin pipe for the handle;
two parts of a metal corner, each 1 m long, which will play the role of skids.

How to make a skid scraper

To make a scraper that slides freely on the snow, you need:

bend the tips of metal knots;
attach a handle to them at a distance of 25-35 mm from the front end of the runners;
retreating 2 mm forward from the racks, install 2 pins;
fix the scraper;
install the top of the blade using clamps to help control the height of the device.

If the snow scraper, the photo of the diagram of which is presented below, is intended for a summer residence and it may need to be transported by car, then the scraper can be made foldable.

Motorized option

Cleaning the yard and street in winter can be made easier if you make a snow scraper with your own hands based on a walk-behind tractor. To do this, you do not have to make much effort, since it is enough to attach a snow-removing cloth to the bumper, made, for example, from a curved stainless steel sheet.

Making a manual snow scraper

You can also use a ready dump. You can also install a snow shovel on your bike by attaching it below the handlebars.

Plywood scraper

If the scraper is needed urgently and it is supposed to be used for only one season, then such a tool can be made in a couple of hours. To quickly make a snow scraper with your own hands, you will need a sheet of thick plywood measuring 50 by 50 cm, the surface of which should be treated with water-repellent impregnation, and the edge with epoxy. On both sides it should be finished with aluminum to ensure ease of sliding. As for the handle, it needs to be made somewhat shorter than that of ordinary shovels, and the edge that was supposed to be attached to the scraper needs to be cut at an angle of 45 degrees. In order for the scraper to turn out to be reliable, you need to drill 6 mm holes in two places and put bolts and nuts. Next, the stalk should be fixed with a wooden plank so as to increase the angle of attachment.

Now you know several ways to make a snow scraper and you can meet the winter fully armed.

Comments

Snow removal: a comparative review of snow removal equipment

However, for those people who like to make everything with their own hands, making a snow scraper will not be difficult.

To make a simple, but at the same time reliable scraper, you will need a minimum of bench tools and the most common materials that can always be found in the garage.

So, this article will be devoted to how to make a snow scraper with your own hands.

Do-it-yourself snow scraper

There are plenty of options on how to make a scraper for cleaning snow today. For these purposes, you can use both wood and sheet metal. If there is a piece of an unnecessary large-diameter metal pipe, then, as it turns out, it can also be used to make a scraper.

Wooden snow scraper

Making a scraper for cleaning snow from wood is as easy as shelling pears. This will require a piece of chipboard or other durable plywood. The dimensions of the future snow scraper do not need to be made too large, otherwise, cleaning wet sticky snow can become a nightmare.

It is important to beat one edge of the scraper, the one that will be working, with a piece of tin so that the sliding of the scraper on the snow would not cause obstacles during operation. The handles of a homemade scraper can be made from bars by attaching them with screws to the work surface.
So that during operation, the handles of the snow scraper do not loosen, it is important to reinforce them with sloping crossbars from a piece of not too thick board. At this point, the process of making a homemade snow scraper is ready.

Metal scraper for snow

To make a snow scraper from a sheet metal bush, you will need a welding inverter and the ability to work with it. Of course, you can also assemble a snow scraper on a threaded connection, using long bolts with nuts and wide washers for this.

But it is still better to assemble the snow scraper by welding, because in this case it will turn out to be as strong and stable as possible during operation. In general, making a metal snow scraper is no different from assembling a wooden scraper.

There is another option for making a snow scraper from a piece of large-diameter metal pipe. To do this, the pipe must be cut lengthwise into two parts. One of the parts that will be used is fixed with clamps on a two-wheeled wheelbarrow, as in the pictures above.

If there is no piece of pipe, then the scraper can also be made from a sheet of thick tin, after bending it into a semicircular shape. In this case, the scraper should be fastened to the wheelbarrow using long bolts, having previously drilled through holes in the body of the wheelbarrow for this.

(21 ratings, average: 4,14 out of 5)

It's nice to see the snow lying outside the window on a winter day and watch sparks from the sun on it. But the snowdrifts formed on the path from the house will not be able to contribute to free movement along it. Snow shovels and scrapers are used today to remove snow and ice. Everyone chooses the tool that is most convenient for him to use.

Snow shovel

Before purchasing the right tool, you must find out about manufacturers, reviews of which you can find on the Internet. But not only a good producer is important. The dimensions and materials of shovels also affect subsequent operation. If you decide to make a snow shovel with your own hands, then you definitely need to find out all the nuances regarding such devices.

A shovel, as you know, consists of two main parts - a bucket for collecting snow and a handle, or handle. However, when assembling many purchased models, there may be more manufactured parts. The parts of the shovel are assembled into a single element with the same function.

Snow shovels are made from materials such as wood, plastic or metal.

In addition to optimal weight, a shovel should have a comfortable grip. The cutting is selected taking into account the growth of its owner. A short handle will make the tool uncomfortable to use. The bucket must also be the correct width. The wider it is, the more snow it can collect. But with wet deposits it will be easier to cope with a small shovel.

For convenient collection of snow, a three-side model is used, which is able to hold all the collected light and loose snow. Longitudinal ribs in the bucket increase the degree of its sliding on the surface. The nature of the work and the individual load strongly influence the choice of snowplow.

For transportation in a car and compact storage, folding and collapsible models are specially produced. And for children, small shovels are produced, which makes joint cleaning on the street an exciting process.

How to make a snow shovel with your own hands

A do-it-yourself snow shovel will save you money and time looking for a suitable option that you can make yourself, adjusting it to your needs.

For many people, there is no problem how to make a snow shovel on their own. Wooden samples have been made by the owners of private territories themselves for a long time. Before making a wooden snow shovel you will need the following materials:

Sheets of plywood 5-6 cm thick;
Wooden rail (it is better to buy ready-made in the store);
Strip of galvanized steel;
Nails and screws.

Work order:

The back wall of the shovel is made from a piece of plywood 45 cm wide. The arc-shaped part has a height of 8 cm in the middle, which tapers to the sidewalls to 5 cm. To fix the handle in the middle, a cut is made with a bevel of about 1 cm.
The scoop is made from a sheet measuring 45 by 45 cm.
The rail is applied to the cut of the back wall and a mark is made to cut off excess material. Then the stalk will lie tightly in the cut.
The finished scoop is applied to the arc of the wall and fastened with nails. Usually three nails are used - one in the middle of the back wall, the other two are hammered on the sides. It is necessary to check that the bucket is obtained without gaps, otherwise the adhering pieces of snow will quickly soak into the material and soon deform it.
After making sure that the edge of the handle is pressed close to the plywood sheet, it is fixed with self-tapping screws.
Steel strips are made of a suitable length for the lower edge of the scoop and strengthening the fixation at the point of attachment of the handle to the back wall. Metal strips are fastened to wood with self-tapping screws.

If you want a more durable working tool, then you need make a bucket from stainless steel or galvanized metal.

Sometimes the weather "pleases" with such snowfalls that removing snow with even a wide shovel takes most of the time. To cope with snow drifts faster, the owners of the territories purchase a scraper or scraper. Outwardly, it looks like a wide shovel for snow removal. An effective device helps to clear areas near the house and with a path from snow precipitation in a short time.

The scraper is a wide bucket for snow removal, to which a large arc-shaped handle is attached. Depending on the size of the structure, it can be operated in two or four hands. Working together with a drag scraper allows you to clear the area by moving large layers of snow.

Such a tool is only suitable for clearing light snow. With stale mass and icy paths, you still have to work with a shovel. But there is an alternative solution - a scraper on two or four wheels. Such a snow shovel is considered convenient to use and copes even with wet deposits.

Scrapers are made from the same materials as snow shovels.

Do-it-yourself snow scrapers

Making a snow scraper with your own hands is not a difficult task. For him only need more material than for a shovel, but in the end it will also be an economical option.

An ordinary wooden scraper is made from a wooden board and bars. One side is upholstered with an iron strip for better sliding of the scraper. A square frame is made of bars and one side is fixed to the board with self-tapping screws.

The second option is to create a wheel-driven scraper. For manufacturing, prepare:

A metal sheet;
An arched handle from an old wheelbarrow or stroller;
Narrow metal pipes;
Two small wheels;
Self-tapping screws or screws;
conveyor belt;
Welding machine.

Work order:

The metal sheet is given a semicircular shape.
From narrow pipes make stops. One end is welded to the scoop, holes are drilled in the second for the axle of the wheels.
From metal corners, fixing ears are created for racks, which are also welded to a metal blade.
To facilitate the design for the racks, you should take two more pipes, make three holes in them and adjust the height of the arc handle.
In fixation dreams, the remaining parts are fastened with screws or self-tapping screws.
To avoid damage to the scraper when cleaning the tracks, a conveyor belt is attached to its lower part.
The finished product is covered with colored paint.

Instead of a metal sheet, you can use unnecessary large diameter pipe. Having cut it in half, one part in the finished semicircular form is used under the scoop. Such a tool looks like a mini snowplow, which is manually operated.

With the onset of winter, the owners of private territories have new worries. They have to constantly clear the courtyard area from snow. To make this hard work more convenient, it does not hurt to have a portable snowplow for such an occasion. Most often, the owners use a manual snow scraper, which allows you to quickly clear the adjacent areas of the territory, exterior items and roofs of houses from precipitation.

Before heading to the store to buy the right tool, you should find out which manufacturers produce the highest quality and most reliable snowplow equipment. But in order for a snow shovel not to disappoint, you need to look not only at the manufacturer. The ease of use of the purchased device largely depends on the size and material. If you wish, you can consider the option of making a snow shovel with your own hands, but in this case, you will first have to find out all the nuances regarding such devices.

In the design of a snow shovel, two main elements can be distinguished - a bucket for collecting snow and a handle. Sometimes in stores you can also find such models that are made using a larger number of parts. But even against the background of such differences, similar instances are intended to perform the same function.

Traditionally, wood, plastic and metal are used to make snow shovels.

Made of plastic

The plastic used by manufacturers must be frost-resistant.

For some models, it is complemented by a metal edging on the bucket, which allows the product to more easily withstand mechanical loads and increases its service life. Plastic shovels are more convenient to use due to their light weight. This is the perfect solution for women and teenagers. At the production stage, the material is treated with chemical compounds, and the area near the handle with the bucket is protected by a special edging, which makes the product more wear-resistant.

from wood

They are most often chosen by those owners who seek to save money. The main disadvantage of such devices is the fragility of the material. In addition, wood tolerates moisture much worse than plastic, which very quickly causes cracks to appear on the surface. Snow shovels made of wood are best used for clearing freshly fallen snow. In order to easily cope with ice and wet precipitation, it will be necessary to additionally equip the bucket with a metal edging, which will increase the operational period of the tool.

metal

These shovels are the most durable, and therefore last longer than other snow removal tools. But they are also more expensive than other types, although this is not surprising, given their high level of performance. Metal shovels can easily cope not only with snow, but also with frost.

To be less tired, you can purchase a tool made of aluminum or duralumin, which has less weight than steel products. Aluminum is lighter than wood, but still does not have the same amazing strength as metal shovels. Compared to it, duralumin looks preferable, because this material is much stronger, although much heavier than ordinary aluminum. Steel shovels require considerable physical effort, therefore, as a rule, only men work with them.

When evaluating shovels by weight, it is also necessary to pay attention to the handle. For more convenient work, the handle must correspond to the growth of the owner. Cleaning the area with a short-handled shovel will be very tiring.

Not less important so that the bucket is the correct width. The wider it is, the more snow it can collect. But to remove wet precipitation, it is best to purchase a small shovel.

It is most convenient to clear the yard of snow using a three-sided model, since it allows you to hold all the collected light and loose snow. Its bucket has longitudinal ribs that increase the degree of its sliding on the surface.

Even when choosing a snow removal tool, you need to pay attention to the nature of the work and the individual load.

So that snow clearing equipment can be transported in a car and conveniently stored, manufacturers produce special folding and collapsible models. There are also solutions for children - small shovels that will allow even little helpers to take part in joint cleaning.

Making a shovel with your own hands

It is not necessary to spend money on buying a snow shovel.

If desired, each owner can make it on their own, thereby saving not only money, but also time looking for a suitable model.

There are no special difficulties with the manufacture of a shovel for removing snow. Many owners of private territories have long been engaged in the manufacture of wooden products with their own hands. But for those who have to make a wooden snow shovel for the first time on their own, it does not hurt to first find out what materials will be required for this work:

nails and screws;
wooden rail;
strip of galvanized steel;
plywood sheets 5 cm thick.

After preparing everything you need, you can proceed directly to the assembly of the tool:

First you need to make a back wall, for which you need a piece of plywood 4-5 cm wide. This part should turn out in the form of an arc and have a height in the center of no more than 8 cm, and narrow in the sidewalls to 5 cm. For further fastening of the handle, you need to in the middle, make a cut with a bevel of about 1 cm.
Now the rail needs to be attached to the profile of the back wall and mark the place for cutting off the excess. In this case, the cutting will fit snugly into the cut.
After the scoop is ready, it must be attached to the wall arc and attached with nails. Usually three nails are enough - one is driven in exactly in the middle to the back wall, and the other two - on the sides. Be sure to inspect the bucket and make sure that there are no gaps. Otherwise, during cleaning, adhering pieces of snow will be absorbed into the material, which, as a result, will deform very quickly.
After making sure that the edge of the handle is closely adjacent to the plywood sheet, it must be fixed with self-tapping screws.
For the lower edge of the scoop, in order to strengthen the fixation at the junction of the handle with the back wall, it is necessary to prepare steel strips of the required length. Finished strips are attached to the tree with self-tapping screws.

In order for the snow clearing tool to serve for a long time, it is advisable to make a bucket for it from stainless steel or galvanized metal.

For a better understanding of what it will look like, Let's take a closer look at the workflow:

Scrapers for giving

There are times when it snows more than usual, and you have to devote a lot of time to cleaning the area. Not always, even with the help of a wide shovel, you can quickly cope with this task. For such a case, the owners of private territories would do well to have a scraper in their arsenal - a scraper for snow removal. Such a tool in its appearance is an ordinary snow shovel, only with a wide bucket. With the help of this device, it is possible, without much effort, to clear areas near the house and paths from snow masses.

Structurally, the scraper looks like a wide snow bucket with a large arc-shaped handle attached to it. Depending on the size, you can work with such a tool in two or four hands. Working together with a drag scraper allows you to clear the area from snow by moving large layers of snow.

But you can use such devices only for cleaning light snowfall. To remove packed snow masses and areas of ice, you will have to use a shovel. Although in this case there is a good solution - a scraper on two or four wheels. With the help of such a shovel, you can clear the area of wet deposits without much effort.

Scrapers are in many ways similar to snow shovels. In particular, manufacturers use the same materials for their manufacture.

DIY manufacturing

To make your own snow scraper, you do not need to have special knowledge. This tool differs from a conventional shovel in that it will require more material. But in this case, it will still be economical.

To make a simple wooden scraper yourself, you will need a wooden board and a couple of bars. One side needs to be upholstered with a metal strip to improve the glide of the fixture. The bars will be needed to make a square frame, which is later attached to the board with one side using self-tapping screws.

But you can offer another option for manufacturing a scraper, which involves adding wheels to the design. For such a snow removal tool you need to prepare the following:

Metal sheet;
an arc-shaped handle (for example, from an old stroller);
self-tapping screws;
two small wheels;
narrow steel pipes;
conveyer belt;
welding machine.

The process of making a scraper for snow removal on wheels will look like this:

It is not always possible to find a metal sheet on the farm. In this case, it can be replaced by any abandoned large diameter pipe. It needs to be cut into two parts, and then take one and use it as a scoop.

Winter is a difficult time for owners of private territories. At this time of the year, they have to regularly clean the area from the snow that has fallen. But doing this job will be easier if they have a special tool. Most often, a snow shovel is used for this purpose. But for larger territories it is not always enough.

In such a case, it does not hurt to purchase a snow scraper. Although this device for clearing the area from snow can be made by hand.

Due to the fact that the scraper has a simple design, it can be made from the wood lumber available in each household and thereby save a considerable amount of money. But the main thing is that the snow scraper will ideally meet the requirements of the owner, which will make the work as convenient and efficient as possible.

Snow season is the favorite time for kids: skiing and sledding, fun snowball fights and building ice castles... But the owners of country houses are not very happy with the abundance of snow, because they have to take up the shovel again and clear the territory. It's good when you have the opportunity to purchase a snow blower and turn a seasonal duty into a pleasant job. But if there is no extra money to buy a useful “helper”, you can always make a snow blower with your own hands from materials that have been gathering dust for a long time idle in the corner of a workshop or barn.

Construction #1 - Snow Blower Model

We suggest that you first consider the option of how to make a snow blower with your own hands based on an old engine from a walk-behind tractor. For this you need to prepare:

Sheet (roofing) iron for assembling the screw body;
Steel angle 50x50 mm for the construction frame;
10 mm plywood for side pieces;
Half inch pipe for arranging the handle of the machine.

When planning to equip a homemade snow blower with an air-cooled engine, it is imperative to provide additional protection for the air intake opening from fine snow particles emitted during operation.

The engine power of this device is 6.5 hp. It is quite enough for cleaning fresh snow from the backyard.

Thanks to the machine's working width of 50 cm, it will be convenient to move the structure and clear winding paths on the site. The machine has compact dimensions, its width does not exceed 65 cm. This allows you to hide the snow blower in the barn at any time as unnecessary, it easily passes through a regular doorway.

A ¾ inch pipe can be used to make the auger shaft. A through cut is made in the pipe, which is necessary for fixing a metal blade with dimensions of 120x270 mm. In the process of operation, the captured snow mass from the conveyor belt will be moved by the auger to the blade. This blade, in turn, under the action of the rotation of the shaft, will throw the snow to the sides.

The snow blower frame can be welded from steel corners 50x50 mm, and closer to the edges of the structure in the pipe to the transverse corners, it remains only to weld two corners on each side, the dimensions of which are 25x25 mm

In the future, the engine platform will be attached to these corners. You can fasten the transverse corners with the longitudinal ones and fix the control handles on them using bolts (M8).

The auger pipe is equipped with a metal spatula and four rubber rings d = 28 cm, the material for the manufacture of which can be the sidewall of a tire or a 1.5-meter conveyor belt 1.5 mm thick.

You can cut out rings from the rubber base using a simple device: drive two screws into the board, and then fasten this design tightly to the tape and rotate it in a circle. You can greatly simplify the cutting procedure using a jigsaw

Since the snowblower's auger will rotate in self-centering bearings 205, they must be placed on the tube. In order to make a snow blower yourself, you can use any bearings, the main thing is that they must be closed. In the role of a protective cover for bearings, a support from the cardan of old Zhiguli models can act.

Advice. In order for the design to fit well into the bearings, you need to make a couple of cuts in it and lightly tap it. Such manipulations allow you to slightly reduce the diameter of the shaft.

To insure a homemade auger from ice, it is advisable to provide a safety pin. In addition to its direct purpose - cutting when the auger is jammed, it will serve as a belt fuse (if a belt transmission system is equipped). The auger can also be driven by a chain. Its idle speed is about 800 rpm. All the necessary accessories for a snow blower can be purchased at any specialized store.

A piece of plastic sewer pipe d = 160 mm is well suited for snow removal. It is fixed on a pipe of the same diameter, placed on the screw body itself.

The continuation of this pipe section will be a chute for ejection of snow, the diameter of which should be greater than the width of the metal blade of the auger.

Construction assembly

Before assembling the structure, it is necessary to pay attention to the fact that the dimensions of the machine body must exceed the dimensions of the screw itself by a couple of centimeters. This will prevent the mechanism from touching the walls of the case during operation.

Since the snow blower engine can also be used for other purposes during snowless periods, it is desirable to provide a quick-detachable convenient platform in the design of the unit, thanks to which the engine can be removed at any time without using any tools.

A significant advantage of such a constructive solution is the ease of cleaning the body and movable parts of the machine from compacted snow. And it’s much easier to store such a snow blower: just remove the engine and the car will become twice as light.

The basis for the skis are wooden bars, which are additionally equipped with plastic lining. You can make such linings from a box from electrical wiring

The snow blower is ready for operation. It remains only to paint a home-made device and start working on clearing the snow.

Design # 2 - rotary snowplow "Vyuga"

This rather simple device can be made in any workshop equipped with a lathe and a welding machine. The snow blower designed by Penza craftsmen showed itself well even in rather difficult snow conditions.

The basis of the design of the device is: an engine with a built-in silencer, a gas tank and a cable for controlling the throttle.

All components of the device can be purchased at the store or taken from the same motorbike

First you need to make a rotor on a lathe based on an appropriate workpiece from an electric motor part. Outwardly, it looks like a steel disk d = 290 mm and 2 mm thick. The disk, connected by means of bolts to the hub, forms a structure to which 5 blades are already attached by welding. To increase the efficiency of the mechanism, the blades are additionally reinforced on the reverse side with stiffeners.

The motor cooling system works on the principle of a fan, the blades of which are made of duralumin and are fixed on a pulley to start the motor

The fan is protected by a soldered casing located on the crankcase cover. To improve the quality of cooling, the cylinder head is placed at an angle of 90 degrees.

A shaft is mounted on the rotor housing on four ball bearings placed in pairs. It is fixed to the body with a steel clamping ring and bolts. The rotor housing itself is pressed against the frame using a special bracket, which partially captures the clamping ring.

Schemes of assembly of the main elements of the snowplow "Vyuga"

The removable elements of the machine are the aluminum wall of the rotor housing and the scrapers placed along the frame.

A significant advantage of a homemade snowplow is the ability to adjust the width of the grip by changing the scrapers. At the height and quality characteristics of the unit. The weight of the structure does not exceed 18 kg, which makes it possible for women to use it, and the snow throwing distance is about 8 meters.

Categories

Popular