Fur, like human hair, tends to fade in the sun: fur collars and hats, after a certain time of wearing, lose their color brightness or acquire a copper tint. To return the former brightness of colors to your favorite collar, it is not necessary to turn to specialists, you can manage the wave with your own efforts.

How to dye fur at home?

Of course, many are interested in how to dye natural fur, for example, mink or arctic fox. Fur is similar in structure to human hair, so the procedure for dyeing it will be very similar to dyeing hair at home.

To dye the fur you will need:

• dye. It is better to choose high-quality, expensive paint, it will last longer and will not stain the fur with spots;
• salt - 2-3 teaspoons, ammonia - 1 teaspoon, detergent - 1 teaspoon, baking soda - 1 teaspoon, 1 liter of water. The solution obtained by mixing these ingredients is used to clean the fur before dyeing. Before dyeing fox, mink, or any other fur, it should be cleaned of grease and dirt, otherwise the paint will not stick and all efforts will be in vain;
• fat cream (or glycerin) - they process the mezdra (skin on the back of the product) in order to avoid its drying out;
• vinegar - needed to rinse the fur after dyeing.

Coloring procedure:

1. Fur wash. The above alkaline solution is applied with a brush, then rinsed and dried naturally. The fur can shrink after washing, so it is better to stretch it on a wooden board and secure it with pins (or carnations).
2. Direct staining carried out quickly, on a pre-moistened pile. The paint is kept for as long as indicated on the box.
3. After staining the fur is kept in warm water with vinegar and dried without the use of a hair dryer. In order for the product not to sit down, it is also attached to the board with the fur up. The mezra dries the longest, so do not rush to remove the product from drying if it seems that the fur is already dry.

Many are interested in how to dye white mink fur on their own. Unfortunately, coloring in paints like "blond" can lead to the appearance of unwanted shades, which will be very difficult to get rid of. Therefore, it is better to take a white fur coat or collar that has changed color to a dry cleaner, where it will be returned to its original appearance.

It is known that fur products look beautiful and luxurious, they warm well in the winter cold. Like any clothing, they lose their great appearance over time. If your favorite thing is faded or just tired, you can paint it at home without resorting to specialists, thereby making it something new and unique.

How to dye fox fur at home

The fur of the polar fox lends itself well to dyeing. If you want to upgrade your fox item, you will need:

• hair dye;
• fat cream (can be replaced with glycerin);
• hair balm;
• rubber medical gloves;
• a brush or an old toothbrush for applying the coloring composition;
• vinegar.

1. Lubricate the mezra with cream.
2. Stretch the material on a flat surface, secure it.
3. Thoroughly dampen the previously cleaned surface with water.
4. Put on gloves, quickly apply the coloring composition, smoothing the pile with your hand.
5. Wait for the period of time indicated in the staining instructions.
6. Rinse the villi under running warm water, rinse in a solution of vinegar.
7. Treat the thing with a balm diluted in water, rinse.
8. Lubricate the mezra again with cream, gently stretch it, pin it with pins, let it dry.

The mink coat looks great and is durable. If the color of the product has faded, you can dye the mink fur. Before dyeing mink fur at home, prepare:

• hair dye;
• spray;
• a comb with frequent teeth;
• shampoo;
• hair balm;
• fat cream (can be glycerin).

1. Clean the item of grease and dirt.
2. Treat the mezdra with cream.
3. Prepare the composition for staining according to the instructions.
4. Lightly dampen the surface with water using a spray bottle.
5. Apply the dye to the pile with a spray gun from a distance of 50 cm.
6. Align the tone by combing the surface with a comb.
7. Wait half an hour.
8. Wash off the coloring composition with warm water and shampoo.
9. Rinse with balm diluted in water.
10. Apply the cream to the core.
11. Lay out the product, leave it to dry.
12. Comb the villi in the desired direction.

Before you dye the fur at home, you need to clean it. Paint particles hardly penetrate greasy, dirty pile. Before dyeing a fur coat or other fur thing, you should clean the product with an alkaline solution. For this you will need:

• water - 1 l;
• salt - 2 tsp;
• ammonia - 1 tsp;
• detergent (washing gel, washing powder) - 1 tsp;
• baking soda - 2 tsp

1. Dissolve the ingredients in water, mix well until smooth.
2. Treat the mezdra with a fat cream (you can use glycerin) to prevent drying out.
3. Apply the resulting solution evenly to the pile using a brush.
4. Rinse thoroughly under running water.
5. Lay out the item, let it dry at room temperature.

Coloring fur with hair dye

The pile of natural fur resembles human hair in structure. Therefore, the paint used for hair is suitable for home dyeing. This drug can be purchased at any supermarket, household chemicals store. The choice of colors and shades is varied, and it will not be difficult for you to find the right tone. It is better to choose shades darker than the original color, for example, black. To give a thing a light shade, you need to discolor it by treating it with a solution of hydrogen peroxide. Painting fur with this tool is simple, reminiscent of the procedure for dyeing your own curls.

Another product designed for dyeing at home is a special spray. This drug is used to give shade to long tips. The undercoat and inner coat are not affected. The coloring matter is scattered at a distance of 60-70 cm. The cartridge should be moved slowly, measuredly for a uniform distribution of the substance. The painted area should be combed immediately to remove excess funds and prevent the villi from sticking together.

Video: is it possible to dye a mink coat

We give a fur product a second life - we learn to dye fur at home

Happy owners of fur things know that they fade over time. To restore the color, it is not necessary to seek help from professionals - this can be done at home. Knowing how to dye fur, you will give the product a second life at minimal cost.

Before proceeding directly to painting, the fur must be prepared. Thoroughly clean it of dust and dirt so that the paint fits well. For these purposes, you can use an alkaline solution.

Per liter of water you need to take the following components:

• about 15 grams of salt;
• two teaspoons of baking soda;
• 7 ml detergent;
• 5 grams of ammonia.

Mix all the ingredients to get a homogeneous mass. Easy to apply with a brush. Be sure to rinse off. You can use another composition: combine water, vinegar, alcohol in equal proportions.

The wrong side, the core, also needs to be processed. It is necessary to apply glycerin or a greasy cream on it.

This will prevent deformation of the skin. The fur needs to be attached with pins on a plank so that the thing does not lose its shape during the dyeing and drying process.

If the mezra is poorly dyed, it will “shine”, creating the effect of rare villi. It can be tinted from the inside out. How to paint the mezdra of fur? You can use a special tool or apply hair dye, having previously tested it on an inconspicuous area.

Using hair dye

It is often used to color fox. It is quite dense, so it is better to buy two or three packs so that the color is saturated and uniform.

Before applying the composition to the entire surface, test it on a small piece.

You can see how it "behaves" when interacting with chemicals. Choose a paint one or two shades darker than the natural color - it will make its color more saturated.

If the thing turned yellow, it is better not to color it, but to lighten it. This can be done with hydrogen peroxide. Only after that it is necessary to apply the coloring composition of the corresponding shade.

Owners of stylish things often think about how to dye natural fur at home. This must be done with quick, uniform movements. Leave the paint for the time indicated on the package.

After applying the paint, it must be rubbed over the surface so that there are no bright spots left. This should be done carefully, without wringing the villi, before that you should wear gloves.

After the period indicated on the package has expired, rinse in warm water with vinegar. To make it soft and shiny, after drying, you can apply the balm that comes with the paint.

Rinse it thoroughly and dry the fur. After such manipulations, the thing will look like new.

Spray paint

Owners of things made of fox fur sometimes notice that the tips begin to turn yellow. To restore the original look, it is not necessary to paint the entire product, it is enough to use paint for suede from an aerosol can.

Choose the desired color and spray at a distance of at least 70 cm from the product. To prevent the hairs from sticking together, the spray can must be constantly moved, and after spraying, immediately comb them with a special brush.

If you want to dye your fox fur in a different color at home, regular hair dye will come in handy. To get the desired result, you need to follow the instructions. But it is worth remembering that the color will last no more than 8-9 months, and then it will gradually begin to wash off. To return the original appearance, the thing will have to be painted again.

Can mink products be dyed?

Natural fur is always in fashion. But over time, stylish mink items lose their rich color and luster. How to dye fur at home? This is not difficult if you follow the basic rules.

Often, women dye their mink with regular hair dye. Before applying the composition, mink fur must be prepared in the same way as fox fur. To facilitate the procedure, you can use an aerosol or spray bottle. Spray the product at a distance of about 70 cm. Do not forget to comb the hairs with a brush or at least rub them with your hands. You can use a hair dryer to dry or let it dry naturally. Shine and softness will give hair balm applied to the surface. Be sure to rinse it thoroughly.

Products from it are very popular due to their attractive appearance and reasonable cost. But over time, faux fur needs painting.

If you want to radically change the color of the product, choose a hair dye with a high degree of durability. In order to refresh the shade, a tinting shampoo is suitable.

Pre-clean the product from dust and dirt with a swab dipped in shampoo. Apply the coloring composition to a small area to evaluate the result.

In order for the entire surface to be well painted over, the product must be well stretched and fixed. Swipe the brush in the direction of the fibers, grabbing the fabric as well. Keep the dyeing time indicated in the instructions and rinse the fur thoroughly. Comb the wet villi with a brush and let the product dry.

If you know how to dye real or fake fur, your clothes will always look fresh and tidy.

The best ways to dye fur at home

Have you ever thought about how to dye fur at home. But surely every modern fashionista has a vest, a sheepskin coat or a fur coat made of natural or faux fur in her wardrobe. During operation, the fur can change its original appearance, burn out in the sun, or maybe you will come up with the idea of ​​​​changing the appearance of an old little thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, at an impressive cost, they do not always meet the expectations of customers. That is why the question of how to dye fur at home, whether it is possible, in general, to carry out this procedure on your own, is very common today. We will talk about it in the framework of this material.

Preparatory activities

The success of the “operation” largely depends on how well the preparatory measures are carried out. Having decided to update the shade of the fur or radically change it, do not forget to clean it, because the dirt prevents the deep penetration of the dye, respectively, the result of dyeing affects.

For cleaning, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at the nearest pharmacy. All components must be thoroughly mixed with each other until a homogeneous mass is obtained. On the mezdra (bottom layer of the skin), to prevent drying out, apply a greasy cream, for example, for children. Then, armed with a brush with hard bristles, you should apply an alkaline solution to the fur, spreading it over the entire surface, then rinse the product thoroughly under running water and lay it in a horizontal position to dry.

If you do not know how to dye fur at home, what means to use for this, you have come to the right place. To date, there are enough professional paints and compositions in specialized stores, but hair dye is still no less effective and affordable. You can find it in any supermarket at an affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.

So, for dyeing, you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to the option with hard bristles.

How to dye fox fur at home? Luxurious vests made of fox skins are a trend of the last few years. They will be relevant in the near future, which is why the owners of such luxury need to properly care for it: update the shade of fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of the fur product. So why not take advantage of this opportunity?

If you do not know how to dye natural fur at home, in particular fox fur, it is important to get acquainted with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing the fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

For maximum results, wet the fox fur with water, and then proceed to apply the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to withstand the time indicated on the package. After that, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be approached more demandingly. The same hair dye is perfect, but it is better to give preference to a professional series that will give the most natural natural shade, and it will last much longer than budget counterparts. But some recommend using spray paint. In this case, it is necessary to apply paint from a distance of 60-70 cm in several layers. Do not be afraid to layer paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use the general rules that work with any fur. In everything, the dyeing procedure completely repeats the procedure for transforming fox fur, described above.

This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made of mouton fur gives. But not everyone knows how to properly care for the fur, which is why, with time of operation, there is a need for additional dyeing.

Mouton products are rightfully one of the most unpretentious, but speaking of staining, you should be patient, be extremely careful and accurate. Since how to paint fur at home with paint in the case of a muton. The pile of such fur is quite thick, dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: before dyeing, test a small amount of pigment on a small section of the fur product - in case of spots and bald spots, it is better to abandon the idea of ​​\u200b\u200bself-dyeing and entrust it to professionals.

Do you think only natural fur causes admiration and admiring glances of others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have turned the whole idea of ​​fashion, beauty and luxury upside down. If you have a jacket or bag in this material in your wardrobe, update them with dyeing. Want to know how to dye faux fur at home? We will tell you about it.

For dyeing, the same hair dye is suitable - in the case of faux fur, you can experiment, give preference to brighter, acidic shades. For preliminary preparation, an ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.

In order to get the perfect result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.

We tried to figure out how to dye fur at home, and gave some of the most effective ways. With the proper approach to the procedure, the use of high-quality materials and tools, you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information provided and be sure to use our advice and recommendations.

Dear Clients

Prepayment for tailoring products is not less than 50% of the cost of work.

The Lynx factory also offers additional services, such as painting, cutting and hauling.

Dye fur is produced in different colors. We dye both individual skins and finished fur products (we do not paint sheepskin coats) .

When painting finished fur products, be careful. Paint happens without fabric lining, only skins are dyed. Before painting, you are checked for the possibility of painting.

You can check it yourself if you want. : take your fur product that you want to dye, slightly open the lining and wet the skin well. After that, pull the soaked skin with force in different directions, if the skin is torn, it means that poor-quality dressing was used in tailoring and when painting your product may fall apart - paint it IT IS FORBIDDEN if the skin stretches easily to the sides - paint CAN .

We warn you in advance, when sewing a fur product, many companies often stretch the skin so that it is larger, such things after painting I can sit up to 30% .

Fur dyeing

Shearling coats, sheepskin (NOT SHEARED) AND LEATHER - WE DO NOT COLOR!

• Painting time 2 weeks
• Shrinkage of a fur product during painting 30% (1 size)
• Shrinkage during dyeing always occurs and the product shrinks uneven
• It is necessary to restore (restorate) the product after dyeing necessarily!

  Restoration of products after dyeing
  

  The size	In Malakhovka
  Vest	10.000 rub.
  Jacket (length up to 65 cm)	from 15.000 to 18.000 rubles.
  Short fur coat (length up to 90 cm)	from 18.000 to 20.000 rubles
  Short fur coat (up to 105 cm)	from 20.000 to 23.000 rubles.
  Fur coat long (from 110 cm.)	25.000 rub.
  Recut new lining	25.000 rub.
  Flare (depending on the length of the product)	from 10 - 30%
  Hood	2.000 rub.

  Prices do not include the cost of the stock (up to size 50)

  A bit of history about dyeing coats, furs and skins

  Animal fur has been necessary for mankind throughout the history of its existence. And today, fur remains a valuable and commercially viable commodity, because it is used not only for warmth, but also for decoration and, of course, is a luxury item.

  The skins of fur-bearing animals consist of a dense undercoat and longer and stiffer hairs that rise above this layer. The main function of the undercoat is to maintain the animal's body temperature, while the longer outer coat is to protect the skin during rain or snow. Mostly fur skins are sold at auction. Most of it is bought by manufacturing companies specializing in tailoring products using fur or brokers. The largest auction centers are located in New York, Montreal and St. Petersburg.

  In the modern fur industry, fur is used for tailoring or decorating outerwear. Often, in order for the finishing color to blend well with the color of the main material of the product, it is used fur dyeing in different tones. quality dressing and dyeing of fur very important, because it will depend on how long the product from it will last. Many are interested in the question: is it possible dye the fur so that it does not lose its quality? Certainly! Moreover, if skin dyeing was produced in compliance with the necessary technology, the fur can last longer. That's how dye natural fur so that the skins remain soft and elastic, only professionals know. Sometimes the fur, on the contrary, is bleached or this method is used. natural fur dyeing, in which only longer hairs are shaded. This is what happens in some cases. silver fox fur dyeing. By the same method Can you dye fox fur? and give the product a very original look. When sewing a mink coat or coat, it is also advisable dyeing fur or mink coats in one color, if there are skins that are the same in softness, length of the pile and density of the undercoat, but initially different in color.

  The selection of skins for the product is not easy and requires a lot of furrier experience. The advantage of the fur material is that, if necessary, you can replace pieces with defects with others that are ideal for the main raw material. In such cases, it may also be necessary dye mink fur, arctic fox or other fur-bearing animal in the color of those skins that were selected for the product. It is possible to give a fresh look to a coat or fur coat that has been worn for several years, if paint old fur in another, more saturated shade. A competent selection of fur makes a fur coat as if sewn from one large skin, without focusing on the joining of different fragments.

  Information about where can i dye my fur Now it's not hard to find. It is important to turn to professionals, because such material is quite expensive and requires a special approach. Usually, these are special workshops or fur dyeing studio. Such organizations have special equipment and, most importantly, extensive experience in working with different types of fur, so you should not have any doubts where to dye natural fur .

  Fur skins can be dyed in different ways. The main ones are namazny, okunochny or combined. In each individual case, the most optimal of them is used.

  Where to dye fur in Moscow can be found from various sources. It should be noted that this procedure is quite expensive and only a high-quality service can guarantee a good result and not disappoint. So just trust trusted sources , in such a non-standard type of service as fur dyeing in Moscow . Fur dyeing price will depend on several factors: the method of painting and the chemicals used, (size, length, style) if this is a product.

  Examples of work on dyeing fur and skins

Let's say your coat faded or you just got bored. Or maybe you just want to give your fur clothes a fantasy, unusual look? Or made fur? And you don’t want to go to the dry-cleaner in order to dye the fur? At home, try to do this by reading our tips.

DIY fur coloring

Usually, the fur is dyed in dark colors - black, brown or dark brown. Because then the fur defects will be less visible. In addition, this is the basic rule for coloring fur - you can only dye it in a darker color.

Don't worry - this procedure is no more complicated than

All fur dyeing operations are done only in special longboats stainless steel or plastic barrels. There are two main methods for dyeing fur:

1. Dyeing with oxidative and acid dyes.
2. Toning.

The first way is the most common. Firstly, it is cheaper, and secondly, the fur is dyed in this way at lower temperatures. Fur dyed with oxidation dyes has a greater sheen compared to fur dyed with acid.

Stores now have special sprays for coloring fur products. But you should know that such a method will inevitably stain everything that the fur touches. Below you will see a video where the craftswoman managed to work great with hair dye.

Important:

Before you dye the fur with your own hands, you need to check tannability of skins for welding temperature. The old skin may simply not withstand painting and fall apart during painting. The quality of fur dyeing largely depends on the ability of dyes to penetrate deep into the hair. The coloring solution does not penetrate well into the structure of oily and dirty hair. To do this, you need to kill the skin.

Almost every woman has a fur product in her wardrobe. During prolonged wear, natural fur loses its attractiveness and becomes faded. Some women of fashion dream of changing the color, making it more fashionable, bright. It is quite possible to dye fur at home, the main thing is to follow the basic rules below.

Preparation for staining

Before you start the dyeing process, you need to clean the thing. This will allow you to evenly paint over the product without leaving pale areas on it. A solution prepared from the following ingredients will allow this procedure to be carried out well:

• salt (2 tablespoons);
• ammonia (1 tablespoon);
• baking soda (2 tablespoons);
• washing powder (1 tablespoon);
• warm water in the amount of two liters.

The components are thoroughly mixed, then the mixture is applied to the fur with a brush, evenly distributing it over the entire surface. For effective cleaning, it is necessary to wash off the soap solution several times with a damp cloth or a clean cloth. In order for the mezdra (skin) on the back of the product not to shrink, it must be moist, so it should be wetted.

Interesting! You can clean the item with a regular hair shampoo or dish detergent.

Some use aggressive substances: kerosene or lighter gas. With this method, you must always remember that their use can significantly worsen the appearance of products.

Dry a fur collar or coat on a hanger in natural conditions away from heaters and sunlight on the street or in a room with good ventilation.

Fur types

Before you paint this or that thing at home, you need to understand the features of the material. Only in this case, you can achieve the proper result and get the desired color or shade. It is easiest to dye products made from rabbit, mink, chinchilla. But the procedure should be carried out carefully, since these materials, especially rabbit fur, are highly sensitive to chemicals.

Important! Dyeing thick fur will take a lot of paint and time. But the result will please the owner of the wardrobe item with a good color that will last for a long time.

If the fur coat is made of beaver, you should not even try to lighten it, as it will turn yellow. The muskrat can behave very unpredictably, since not everyone may like pinkish shades with whitish areas. After a while, the paint will burn out, and the product will take on a completely different appearance.

Arctic fox coloring

You can paint the fox product in specialized workshops. The cost of such a service is rather big, and not every person can afford to pay a certain amount. There is a way out - you can perform the procedure at home on your own. To do this, you need to perform the following actions:

1. Choose the right paint. It is sold in hardware stores. If there is no suitable color, there is another option - dyeing the fur at home with hair dye. Such dyes are sold in a large color palette: black, red, golden, brown, red and other shades, it will not be a problem to pick up.
2. Strictly following the instructions, dilute the dye.
3. Put on a mask or respirator on your face, gloves on your hands.
4. Mezdra is recommended to be treated with petroleum jelly, baby cream or glycerin. This will prevent the skin from getting too wet and protect it from drying out.
5. Coloring can be carried out both on wet and dry fox fur. In the first case, the paint falls on the surface quite softly. Apply the substance quickly with a hairdresser's brush. This should be done carefully so that there are no unpainted areas left.
6. If you want to get a leopard color, use a stencil and several colored paints. Holes of different diameters are cut out of thick cardboard, applied to the surface of the product and painted with black and brown paints.
7. A beautiful, rich shade of fox can be obtained if only the ends of the pile are painted. Usually, light-colored coloring compositions are used for this.
8. You can freshen up a fur wardrobe item with a spray, coloring only the ends. You need to buy paint designed for suede, which is available in an aerosol. Holding the can at a great distance, it is necessary to make uniform movements. This is a simple and fast way.

After the procedure is completed, the fox fur is left for several minutes to obtain the desired shade. The time is indicated on the package. Now you should process the product by preparing such a solution: in 2 liters of water, dilute 5 tbsp. tablespoons of vinegar. As soon as it is ready - immerse the thing in it.

Vinegar perfectly fixes the color, gives the fur extra shine and softness, greatly improving the appearance of a fox fur coat or collar. In order for the thing not to deform, the mezdra is stretched on the table, fixing it with clothespins.

To give the polar fox a lighter tone, use a hair clarifier, which is diluted in accordance with the instructions. You can use hydrogen peroxide, diluting it with water in a ratio of 1 to 3. The prepared product is applied to the product and left for no more than 15-20 minutes, otherwise the villi will become brittle. After the time has passed, the fur is rinsed and sent to dry.

We paint a mink coat

Faded mink fur spoils the appearance of a fur coat. In order to restore color and shine, a simple procedure is performed - painting a mink coat. It is necessary to purchase in advance the desired tone of paint, a spray bottle, a comb with thick teeth, a fat cream or glycerin, shampoo and hair balm. Now you need to take these steps:

• clean the thing from dust, dirt, grease;
• treat the skin (mesdra) with a fatty substance;
• prepare the coloring composition in accordance with the instructions;
• moisten the surface of the product;
• apply a dye to the pile using a spray gun;
• comb hairs;
• shampoo diluted with water, wash off the paint;
• balm to treat the surface.

The procedure is over, it remains to dry the product, after applying the cream on the mezra and combing the hairs.

In the same way, you can dye the fur of a silver fox, products from a muton and any other material. For silver fox, mostly black or brown paint is chosen. For a mouton coat, dark reddish shades, chestnut color are best suited.

Fur collar dyeing

It is not always necessary to completely paint a thing. In some cases, it is enough to dye the fur collar at home. This is pretty easy to do with regular hair dye. First, the collar is cleaned of dust and dirt, dried, and then proceed directly to the dyeing process:

1. Using the instructions, you need to dilute the paint.
2. For uniform staining, the collar is slightly moistened with water.
3. The coloring composition is applied by hand (you should first wear gloves). The process should be done quickly, well distributing the paint over the pile.

After the procedure is completed, the collar is washed well with water and rinsed in an vinegar solution or hair conditioner. It should be dried on a flat surface, stretched and pinned with needles to the base.

Artificial fur

Some people prefer to buy faux fur products. According to many characteristics, it is not inferior to natural raw materials and even sometimes surpasses it. It can also be dyed using hair dye. First you need to choose the tone of the coloring matter, clean the product, removing dirt, dust, grease from it, using a soapy solution. After that, the remnants of the soap solution are removed with a damp swab.

Processing should be carried out a day before staining.

In this case, you should know that faux fur is dyed in dark colors. You should buy high-quality paint, which will not spoil the thing.

The coloring composition is obtained strictly following the instructions. After that, it is applied to artificial fur with a brush, making movements in the direction of the pile, evenly distributing it. The brush should be pressed so that it touches the fabric base. The paint is left for the time recommended in the instructions, then the material is washed with water, if necessary, excess coloring composition is removed with cotton swabs. After that, the still wet villi are combed with a rare comb and the product is sent to dry.