How to make a floor vase from a pipe with your own hands: master class, video. Do-it-yourself bottle vase - step-by-step instructions on how to make it at home (105 photos) Small do-it-yourself flower vase

Every housewife dreams of having an unusual and suitable thing for her interior. It is especially nice when this thing is made by hand. Stained glass painting has always fascinated me. It turns out that decorating a vase with your own hands at home is possible. The main thing is to determine the degree of complexity of the work performed and correlate it with your capabilities. If decorating vases is new to you, then I advise you to start with simple work. Let's start with a simple technique - applying geometric patterns.

geometric patterns

For this job you will need:

acrylic or stained glass paint for glass surfaces. You can also use spray paint;
brush (we use synthetic for acrylic paints, natural for stained glass);
scotch;
alcohol;
cotton wool

Drawing technique:

Degrease the glass surface with alcohol or any degreaser;
We glue the vase with strips of adhesive tape creating a pattern with it;
We paint over the parts without adhesive tape, going into it. This is necessary so that the edges of the pattern are neat.
We are waiting for the paint to dry. At this time, it is better to remove the vase to avoid accidental touches and smearing of paint. Each paint dries differently, read the instructions on the paint package.

A wide variety of patterns can be achieved with this technique, from parallel lines to various intersections. You can also cut out various geometric shapes and stick them on the surface of the object to be decorated. Do not apply a thick layer of acrylic and stained glass paint to the surface, as this may cause smudges.

For the first work, I do not advise you to choose rounded shapes, it is more difficult to work with them. Faceted vases are better. We work with one face, wait for it to dry completely and move on to the next. The easiest will be to work with spray paint. It is applied in a uniform layer, the spray-paint dries very quickly. As for stained glass paints, their drying time can be significantly reduced. To do this, just put the painted vase in the oven for 15 minutes at a temperature of 150 degrees.

This technique came to us from antiquity. A distinctive feature of pique painting is the size of the dots, the interval between them, the combination and color scheme.

Drawing technique:

Degrease the glass surface with alcohol.
We apply the contour with a dotted touch.

If you are a beginner artist, you can draw a sketch of your drawing on a piece of paper and attach it from the inside.

You can also use ready-made sketches by downloading your favorite picture from the Internet. Before drawing the outline on the vase, test it on a piece of paper. This is done in order to feel its density. Only then proceed to painting on a vase.

If you go beyond the line, you can quickly fix the defect until the contour is dry. Wipe off with alcohol and continue to work. Consider the transparency of the vase, place the pattern on one side or at different levels.

This is necessary so that the image does not overlap. Try to maintain the same interval between the points.

I used 2 types of fills in my work: Marabu and Decola. They are on a different basis and in the work, respectively, behave differently. Decola paint was in a water-based tube. And Marabu is alcohol-based in a jar and needs to be applied with a brush. It is more liquid and can be mixed to get different shades. Decola paint cannot be mixed, so it is more difficult to perform shades and transitions in one contour with this material. Color transitions can be done by breaking one path into smaller ones.

Painted floor rainbow vase

Do not leave gaps in the contours when painting and make sure that the contours are closed. This is done so that the paint does not leak out. I would advise you to start with faceted vases, as they are the easiest to work with. If you nevertheless set to work with a rounded vase, then try to apply the fill in a thin layer to avoid paint leakage.

Vase decor with fabric and ribbons

You will need:

tapes;
lace;
the cloth;
glue.

Decoration materials can be of various kinds. The only limitations are the size of the bottle and your imagination.

Vase decor with beads

You will need:

glue or glue gun;
beads strung on a thread, or individual beads.

You can replace the beads with more natural materials: cereals, watermelon seeds, coffee beans. You can also use pasta that can be painted with spray paint.

Decoupage

The word decoupage from French literally translates as "cutting". In other words, the essence of decoupage is the application. In my opinion, this technique is quite simple and does not require special skills.

But you need to be patient and scrupulous. To perform decoupage work, you must adhere to the following tips.

Work technique:

Decorating a vase with natural materials

Unusual glass bottles of wine often remain at home, which are a pity to throw away, but there is no use for them, and there are always a large number of plastic bottles of soda water of different colors.

Instead of getting rid of them, you can turn them not only into a practical thing - a vessel for flowers, but also create an element of interior decoration.

For those who like to make beautiful unique things with their own hands and who know how to do it from improvised material - a few ideas on how to make a vase from an ordinary bottle.

Glass bottles for handmade vases

Making a vase from a glass bottle is quite simple, you just need to know a few tricks, and then there is scope for imagination and creativity.

The first step is to make the basis for the future vase - the bottle should be cut off the throat, then it will be possible to put not one flower, but a whole bouquet in the vase.

You can do this without tools - you need to take a thick woolen thread 50 cm long, a lighter or matches, a wide vessel with water - so that a bottle can freely fit there, any combustible liquid used in everyday life - acetone, gasoline, alcohol, a bar for sharpening sharp objects or skin.

For safety reasons, you will need goggles and household gloves.

Operating procedure:

draw a line on the neck of the bottle where the cutting will be done;
soak the thread in a flammable liquid;
wrap it around the neck along the intended line in three turns;
set the future vase on a horizontal surface, set the thread on fire;
as soon as the thread burns out, place the bottle in ice water - from the temperature drop, the bottle will burst clearly at the place of heating.

Now it remains to sand the chips with sandpaper and start creativity - the process of decorating a vase.

Decoupage technique

The bottom line is to glue the surface with images on paper and fix them with varnish. Usually paper napkins with different patterns are used. It is done like this:

degrease the glass with a solvent;
cover the surface with a primer or acrylic paint - they can be white or the color of a napkin, which will be used for decoupage;
after the paint has dried, grease the places for decoupage with PVA glue;
attach a pattern cut out of a napkin to the areas smeared with glue;
with a wide brush or sponge, smooth the napkin from the center to the edges;
paint the edges of the napkin with paint so that everything looks neat;
finish the details, decorate with rhinestones or beads;
finish decorating the surface by covering everything with two or three layers of colorless transparent varnish.

Dot painting decoration

For this technique you will need - acrylic paint of different colors, a felt-tip pen with a thin rod, a special contour on glass - silver or gold, cotton buds, art brushes.

You can choose a drawing to your liking - a tree branch, a flower, patterns. You can draw a cartoon character, a firebird, depict a rural landscape - a house and a river.

The drawing is applied like this:

degrease the surface;
draw a sketch of the image;
transfer it from paper to a bottle with a felt-tip pen and circle the lines with a contour for working on glass;
let the image dry, remove the remaining traces of the felt-tip pen with a cotton swab;
fill the image space with a brush with dots of a suitable color and different sizes.

For example, if this is a peacock, then the coloring process will look like this: you need to start filling the contour spaces with paint dots from the body of the bird.

Then color her wings and tail feathers, leaving their center unpainted.

Glue a glass shiny or mother-of-pearl ball in the center of each tail feather, you can lay it out with sequins and beads.

Ribbon decoration

A satin or mother-of-pearl vase is very beautiful, decoration is carried out with appropriate ribbons. It is done like this:

apply PVA glue on the surface of the bottle with a mesh in thin lines or dots;
tightly wrap the bottle with ribbons completely, leaving no gaps on the surface.

Ribbons can be taken in different widths, you can with a pattern - both a plain mother-of-pearl vase and with an ornament will look beautiful. In the same way, you can wrap the bottle with thick threads, twine.

With this technique, you can make unique vases with a textile surface.

You can wrap the bottle with ribbons obliquely, horizontally or in a pigtail - all this will create a unique pattern thanks to the light that will play on the satin fabric.

You can decorate a textile vase with beads and bows.

Vases from plastic bottles

You need regular soda bottles. Basic master class:

on a transparent colorless bottle, apply a top line and a contour where the “lace” will begin;
cut off at the intended neck;
vertically cut the walls of the bottle into strips down to the contour of the beginning of the "lace";
bend the strips out;
bend each strip to the middle of the length and turn it sideways in a plane so that it intersects with the two that are nearby, and reaches the next with the end - this must be done with each strip, the neck of the vase will turn out to be lace.

To make the vase colorful, insert a colored paper sheet or a napkin with an ornament inside.

openwork vase

Required - a plastic bottle, a felt-tip pen, an ordinary nail and a can of paint (you can use a regular stained glass). Then proceed as follows:

cut off the throat, mark with dots a pattern with a marker, which can consist not only of holes, but also of dashes - not to the very bottom, so that water can be poured into the vase;
heat the nail and pierce the bottle according to the applied pattern;

Paint the workpiece with spray paint or stained glass.

floor vase

An unusual floor vase about a meter high will come out of plastic milk bottles and a glass jar. You will need - 14 bottles, a 3-liter jar, paper napkins, toilet paper, glue and adhesive tape.

Manufacturing process:

Glue 12 bottles with the bottoms in pairs with adhesive tape, 2 - fasten them with their own necks;
install bottles fastened with necks in the center, surround with the remaining six pairs and glue everything with tape;
install the jar on the structure and tape it with tape.

Then arrange the papier-mâché frame - paste over the structure with paper:

the first layer - with napkins and solid PVA glue;
the second - toilet paper with it, but diluted with water in a ratio of 1: 1;
dry the product, if irregularities are obtained, fill them with napkins;
apply a pattern with a glue gun, you can glue flowers, butterflies, any decor, or use a stencil, sponge and putty to apply a three-dimensional pattern;
allow the structure to dry for an hour or two;
sand the patterns with sandpaper;
paint the product from a spray can.

small vase

To make it, you will need a 0.5 liter bottle, scissors, a knife, glue or tape.

Cut off the throat from the bottle, cut the upper part into strips, bend them outward downwards and fix them to the base of the bottle with glue or tape. Paint the vase, decorate with beads, sequins or beads.

You can also decorate such vases by gluing pasta of an interesting shape, semolina, coarse salt, shells, small pebbles.

You can paste over the bottle with narrow electrical tape with intricate patterns and paint it with a spray gun, then remove the electrical tape - you get a fancy ornament of perfectly even lines. Making vases from bottles can be interesting and useful to spend leisure time with children.

Photo of a vase from a bottle

A floor vase can become one of the most important home decor items. At the same time, you can even make it with your own hands from different materials. If you know a few tricks, the product will turn out no worse than the store. Ready-made instructions and design examples - about all this right now.

A floor vase can become one of the most important elements of home decor.

Before proceeding with the manufacture of this interesting work, you need to carefully look at the house and try to imagine:

in which part of the vase will look best;
what tones and decor elements should prevail in the finished product;
what flowers and other ornamental plants (twigs) are best suited;
finally, how large a vase needs to be made so that it looks especially good in the interior.

In fact, it’s enough just to “see” the future vase well in your imagination. And to make it easier Here are some ideas for inspiration:

First of all, it is better to determine the size in advance. A vase looks appropriate when it roughly matches the size of the surrounding furniture. For example, it should rise slightly above the sofa or chairs.
In terms of shape, you can choose between rounded and original options. Calm, symmetrical edges are best chosen to create a peaceful atmosphere. And if you want to enliven the space, it is better to make a vase with an original, curved neck, interesting drawings and decorative elements.
As for the color scheme, it is best to make sure that your masterpiece stands out well against the background of the floor, furniture, wallpaper. Otherwise, the vase will literally merge with the rest of the items.

Do-it-yourself floor vase from improvised materials (video)

Choosing decorative branches for a floor vase

The main decor tool that can be put in a vase is decorative branches. A variety of decorations are used - and it is not necessary to choose branches of the same type. You can and often need to combine different options to get more original compositions. Here are a few of them:

Combinations of black and light brighten up the space significantly due to the contrast effect. This gives a light, pleasant look and looks especially advantageous in combination with backlighting.
It has long been a fairly common technique when decorative balls are attached to branches. Here you can choose exactly light products, because on occasion they can be painted in any color, and then the composition will take on a new life.
Multi-colored, wavy branches, collected in a bunch, are in many ways similar to beautiful flowers, collected in a bouquet. And if you put them tightly to each other, you get a very beautiful view - like fireworks.
Finally, branches with leaves or small, bright flowers look very good. They will be appropriate in any kitchen, as they create a very cozy, natural environment.

ADVICE

To create your own unique interior, homemade branches are also perfect. If you collect a few dry branches, clean and dry them further, and then paint them with spray cans, this will not only reduce the cost of the process, but also create much more scope for creative imagination.

The main decor tool that can be put in a vase is decorative branches.

Making a floor vase from waste material with your own hands

Making a floor vase does not necessarily require special skills or special materials. Experience shows that even from waste material you can create a very decent product and decorate it so beautifully that it will be easy to confuse such a vase with glass or ceramic.

In the manufacture of a floor vase, you can even use improvised materials that can be found in any home:

cardboard tubes;
pipes from linoleum;
PVC pipes.

In this case, it is better to take cardboard material, since working with it is very simple. Of course, you can’t pour water into such a vase, but it looks great as a decoration in the house. You will need the following materials and tools:

actual cardboard tube;
cardboard for the manufacture of the case;
a piece of drywall or chipboard for the bottom;
ordinary PVA glue;
pieces of old newspaper for papier-mâché;
paint for applying glue;
knife and scissors;
7-8 egg yolks;
putty;
sandpaper;
compass, ruler, pencil.

Making a floor vase does not necessarily require special skills or special materials.

The most important thing is to determine the height of the finished product. As a rule, the vase should turn out to be at least half a meter, and usually a height of 60-70 cm is chosen. It is according to this landmark that you need to cut off a piece of cardboard tube - the basis of the future craft. It is better to do this with a sharp knife, and the incision must be taken obviously 2-3 cm more, and then simply trim the edges.
Now you need to make a bottom. There are two options here - you can use drywall, or you can take plywood. But in any case, the surface must be sufficiently even so that the product rests confidently on the floor and does not stagger. The circle is first drawn with a compass, and then cut out. In size, it must be obviously larger than the diameter of the pipe (by 4-5 cm). Attaches to the base with glue.
Now comes the most important and lengthy stage. You need to take several sheets of cardboard (they can be obtained by unfolding large cardboard boxes), which should be at least as long as the height of the vase. They draw a contour of identical blanks that will give the vase volume - that is, you need to cut out up to 20-30 identical parts that completely repeat the bend of the product.
And 4 more blanks are cut out together with handles (if the craft provides for such an insert).
Details with handles are glued on each side, 2 pieces, and the rest are glued at a distance of literally 1 cm from each other. This will ensure an attractive appearance and reliability of the entire structure.
Next, you need to wait a few hours so that all the workpieces adhere well to the surface. At the same time, it is better to check again how firmly they are stuck.
In the meantime, you need to make a lot of newspaper pieces, smeared glues - you have to make a surface using the papier-mâché technique. It is important to keep in mind here that it is better to make several layers so that the paper lies as tightly as possible.
Then the egg yolks are mixed with PVA and the entire surface of the workpiece is washed thoroughly, thickly.
Now you need to wait again until it dries, and put a layer of putty.
And when the putty also hardens, carefully treat the surface with sandpaper.
The last stage of work is the most interesting and truly creative. You need to draw a picture or just put a layer of paint from an aerosol can. And now the masterpiece is ready to please the eye.

Gallery: floor vases (50 photos)

How to make your own fabric vase

Now you can consider another manufacturing option - a vase can be made from fabric. For this you will need the following materials:

the basis of the design is a terry towel (a woven napkin is also suitable);
cement and sand;
two standard 10-liter buckets;
water;
polyethylene film.

NOTE

It is better to work in disposable rubber gloves so as not to damage the skin by the action of the cement.

The manufacturing technology is very simple:

First, cement is poured into the bucket (literally half a kilogram) and water is gradually added until a consistency similar to liquid sour cream is obtained.
A towel or napkin is dipped into this solution, and it is important that it is completely soaked.
Now this napkin is placed on an overturned bucket to dry completely. First you need to completely cover this bucket with plastic wrap so that the towels do not stick to the surface.
The bottom surface is carefully smoothed, and the falling folds can simply be straightened out.
The bucket is taken out into the street or placed on the balcony to dry during the day.

In fact, the floor vase itself is already ready. However, you still need to try to make the surface really beautiful and attractive. To do this, we act as follows:

They take 300 g of cement and sand, add one pinch of plaster and dilute the mixture with ordinary wallpaper glue (15%).
Using a brush with this solution, you need to carefully cover the entire surface of the workpiece.
And you can also initially add any acrylic paint to the solution and at the same time paint the craft with processing.

How to weave a floor vase from paper tubes (video)

How to make a large floor vase from burlap with your own hands

And another quite affordable option is to make a floor vase from burlap. To do this, you can even take old material, and also You will need the following materials and tools:

PVA glue or "Moment";
rope (twine);
cardboard tube;
molar tape;
scissors;
ball pen.

The sequence of actions is as follows:

In this case, the main product is also a cardboard tube. It is cut to the desired height, all edges are carefully aligned.
On all sides, the surface is pasted over with molar tape, so that in the end each area becomes quite sticky.
Twine is sequentially wound onto the tape - it is better to start from the inside. Then the workpiece will look very neat.
And in the meantime, quite a lot of decorative elements need to be made from burlap: roses from circles with a diameter of 8-10 cm and leaves (also about 8 cm each, and it is better to highlight the veins and petiole with twine).
Having presented and drawn a drawing in advance, paste over the vase with roses and leaves.

ADVICE

This craft turns out to be especially cozy due to the peculiarities of the surface texture. If you make a small copy of a vase, you will get an excellent case for combs, cosmetics and other pleasant things.

Another quite affordable option is to make a floor vase from burlap.

Decorating options for a purchased floor vase

If there is a purchased floor vase at home, this does not mean that the space for creativity is narrowing sharply. On the contrary, even a finished product can be decorated in such an interesting way that as a result of decoration it will look much more original.

How to decorate a glass floor vase

The glass vase offers a particularly rich range of creative possibilities, as the product is transparent and can be filled with different materials to create an original design. Here are some ideas for inspiration:

spray paint coating - both in one layer and in several colors;
decoration with artificial flowers;
decoration with the help of bulk materials of different colors (beans, peas, cereals;
decoration with twine and textiles.

The glass vase offers particularly rich creative possibilities, as the product is transparent and can be filled with different materials to create an original design.

Unusual decor ideas for a finished floor vase

Here are some interesting ideas for decorating the floor wa PS:

Decor with knitted clothes - by covering a vase or its individual elements with a sweater, you can create a very cozy atmosphere - such a vase looks especially good in the bedroom.
Decorating with twine rope gives the same effect. You can not cover the entire vase, but only the neck or handles.
You can stick roses, leaves, spirals, patterns and other decorative items made of dense fabric in warm colors on the twine.
A vase covered with ordinary pasta looks incredibly beautiful and even mysterious, which then needs to be painted with an aerosol, stylizing the surface as metal.
And if you want to stylize antique, you can decorate with coins, which are pre-painted in dark brown or golden tones - let such a vase attract wealth to the house.

DIY cardboard vase (video)

Thus, you can decorate the house with a beautiful floor vase in any case - both home-made crafts and purchased ones. The main thing is to have a good idea of the future look of the vase and, of course, stock up on inspiration.

Today, only lazy people do not improve the design of their home. Fashion trends allow satisfying the most sophisticated tastes of demanding consumers. At the same time, at all times there was a demand for decorating the interior with high floor vases. However, their affordability does not always coincide with the desired appearance. Like any other thing, a floor vase can be made by hand. Such a beauty will be of the desired shape, and in the desired color scheme, and much cheaper than their store counterparts.
Materials for work:
. Glass jar with a capacity of 3 liters - 2 pcs.;
. Tea saucer - 1 pc.;
. Plastic container for preserves - 1 pc.;
. Silicone sealant - 1 bottle;
. PVA glue liquid (construction) - 1 liter;
. Building alabaster - 4 tablespoons;
. Potato starch - 100 gr.;
. Egg grids - 4 pcs.;
. Vegetable oil - 1 tbsp;
. Vaseline - 1 tbsp;
. Three-layer napkins - 2 pcs.;
. Plasticine - 1 box;
. Old tube of PVA glue with a narrow nose - 1 pc.;
. Glue "liquid nails", white and "gold" paints, blush, eye shadow, face powder, brush, colorless acrylic varnish, water.

Stages of work:
The first stage: we form the basis.
We turn one jar upside down and glue “liquid nails” to it a tea saucer turned upside down.

Glue the bottom of the second can to the bottom of the same can.

Cut off the bottom of the canning container. We glue the inverted container to the neck of the second jar.

Let the base dry for 1 day.

The second stage: we give the vase the outline of the vessel.
Finely chop the egg racks.

Fill with water so that the entire torn mass is immersed in it. We leave for the night.

We wring out the soaked grids.

Tear off large pieces. Fill the whole mass with PVA glue.

Thoroughly, until a homogeneous gruel is obtained, mix the soaked grates.

We fill the space between the neck of the jar and the container with the egg mass.

Apply a thin layer of egg mass over the entire surface of the jars.

We dry the base for 2 days.

We paint white.

The third stage: we apply a three-dimensional drawing.
Print your favorite stencil.

We make cuts along the contours, cut out the necessary points.

We place the drawing on the vessel in a checkerboard pattern in a straight and inverted form (2 times above, 2 times below; top and bottom facing each other).

Draw voids and cuts with a pencil.

Squeeze silicone sealant into an empty PVA tube.

We put a sharp nose on the tube and squeeze the sealant along the contour of the picture.

If necessary, make adjustments with a toothpick.

Dry the sealant for 1 day.

With superficial movements with a large brush, we apply blush toning on the drawing.

Fourth step: make a silicone mold.
Mix potato starch and silicone sealant.

Thoroughly knead until a pasty mass is obtained.

We coat the surface of the figure blank (in this case, a magnet) with Vaseline.

Press the pastry into the flattened dough with the right side down.

Carefully prying with a knife, we take out the workpiece.

Fifth stage: casting the figures.
Lubricate the inside of the silicone mold with vegetable oil (pour it in, then turn the mold over and pour out the oil).

Pour a tablespoon of alabaster (or gypsum) into the container.

Add a spoonful of water there, mix. If the solution becomes thick, add water.

We fill the silicone mold with alabaster solution.

We leave the solution to harden (you can check the readiness by pressing the nail on the figure - the trace should not remain on the surface). We pry the figure with a knife and take it out of the mold.

We repeat the preparation of the solution and pouring 3 more times.

Sixth stage: paint the angels.
We paint over the blanks with white gouache.

The bodies of the angels are matted with face powder.

We dye our hair.

We draw sponges.

Draw the eyelids and eyebrows with a pen.

With white gouache we close the extra layer of powder (next to the bodies of the angels).

Draw the wings in gold.

We apply “liquid nails” on the back surface of the figurines and glue them on the vase.

Step 7: Make roses.
We knead the plasticine, lay it on a hard surface with a thin plate, cut it into squares. In each square we make cuts in a circle from the center.

Gently prying the central center, twist the spiral, moving from the center to the edge. We bend the square corners like large leaves.

We paint the roses white.

We tint them with blush in the color of the volumetric pattern.

The edges are gilded.

"Liquid nails" fasten the roses to the vase.

Eighth stage:

Reading time ≈ 11 minutes

Making a vase from improvised materials with your own hands is a great way to pass the time with benefit and pleasure. So you can give a second life to unnecessary things, get an original little thing for the house and transform it. Consider a few simple master classes on making vases from cans, glass bottles and vessels, and other containers available on the farm.

Examples of vases with their own hands.

Decor materials

The DIY vase-making tutorials below will use materials that you are likely to find in your home, and only a small part of them you may need to purchase. Of course, we are talking about decorating a finished waterproof vessel, since it will be an impossible task for most to make a vase from scratch on their own.

You may also be interested in:
Many materials can be used to decorate a vase:

textiles of all kinds, textures, colors, including ribbons, yarn, ropes, burlap;
buttons, beads, beads, sequins;
colored (printed) adhesive tape;
enameling, glitter;
coffee beans, cereals, seeds, coarse salt;
natural plant materials: twigs, chestnuts, acorns, leaves;
sea shells, natural stones;
kraft paper, cardboard;
clothespins;
coins.

Materials for needlework.

For fastening, it is best to use a transparent glue, which, when dried, does not give a shade and does not stain the materials. And as a basis, a great variety of containers that do not let water through are suitable:

If you are not going to put fresh cut flowers in water in a vase, then the product can be made of a permeable material (cardboard base, for example, a coil or reel).

Cardboard bobbins.

Vase from a jar and twigs

To create a vase, you will need materials that you can probably find at home:

glass jar with a volume of 0.5, 1 or 1.5 l;
twine or thin rope;
a small piece of burlap;
chopped twigs of small diameter (about 0.5 cm);
glue.

Tip: the glass jar can be replaced with any other cylindrical container.

Step-by-step production of a vase from twigs.

Step by step production:

Cut the collected branches with a hacksaw into segments of the same length. They should be similar to the height of the glass container.
Using twine, fasten the branches at the upper and lower ends, tying the twine into knots. As a result, you should get a kind of canvas of twigs.
A piece of burlap, equal in length to the circumference of the jar, must be wound on the vessel, the upper ends wrapped inside the jar and glued. A neat bottom can be left free.
Next, the canvas of twigs needs to be wrapped around the container and tied into knots.

Alternatively, you can not use burlap, but plant branches on glue directly on the jar. In conclusion, it is desirable to fasten the structure with a rope wrapped around the can in several turns. The product will look as decorative and aesthetically pleasing as in the burlap version.

Ready product.

If you use not thin branches, but thicker segments, the vase will turn out to be more rough, but no less original:

Another version of the product.

When using jute

In this master class, you also need to use a glass jar or bottle. You will also need:

glue;
twine, jute or other beautiful rope, a thick rope will also work.

Twine decor.

Manufacturing step by step:

As a result of the work done, you get such a laconic and spectacular vase with your own hands from improvised means:

Ready product.

With a fairly impressive size of the vessel, the vase can be used as a floor vase.

Painted bottle vase

This master class is also very simple and will take you no more than half an hour. Necessary materials:

a glass bottle for any liquid (mineral water, champagne, dairy products);
universal spray paint of the desired color.

Painted bottles.

Step by step process:

Wash the bottle inside and out, remove all labels and traces of glue.
Put the bottle on a metal or wooden rod, turn it over - this will be a kind of support.
Now the container can be painted. It is advisable to use the paint in a spray can for an even and uniform layer without smears.

To get a geometric or any other pattern, pre-cut strips (other shapes) from adhesive tape and stick on the container before painting.

For a more festive and elegant look, you can use sequins of an adjacent shade. With the help of paints and sparkles, you can create very spectacular ensembles.

Glitter decor.

Sequins can cover not the entire vessel, but only part of it:

Partial decor.

There is another option for coloring the bottle - from the inside. To do this, you can use paint in cans. You will also need a metal baking sheet and a grid. Bottles need to be prepared, then pour a small amount of paint inside and carefully distribute it over all walls, turning the bottle over. To dry, the vessel must be turned upside down and left for a day.

Coloring of bottles inside.

Vase of clothespins and tins

The next vase is suitable for a miniature bouquet of delicate flowers. For the manufacture you will need a tin can, a set of clothespins.

Tip: to make the vase neat, it is important to use a small jar, the walls of which can be completely hidden under clothespins.

Clean the jar of dirt, remove the label.
Attach the clothespins tightly to the sides of the jar. For reliability, you can use glue. We recommend purchasing a set of plain wooden clothespins for making a vase - they look as aesthetically pleasing as possible.

Manufacturing process.

The finished vase can be decorated with clippings or stickers. In fact, this is not quite a vase, but rather -. Inside such a stand, you can place a glass cup with a bouquet.

Finished vase.

Vase for artists

You can make the following creative vase in 20 minutes, the main thing is to have all the necessary materials on hand:

any cylindrical container that does not allow water to pass through;
strong glue;
packaging of pencils / felt-tip pens / brushes.

Decor and pencils.

The photo shows that for the manufacture of a vase, the container must be carefully and tightly pasted over with pencils. For a beautiful look, it is advisable to use a pack of new pencils of the same length. The finished product can be tied with a decorative ribbon.

If you use brushes, the vase will look like this:

Tassel decor.

Using fabric

To create the next vase, we will use a simple set of materials and tools:

a glass container (glass is better, as it looks beautifully from under the areas not covered with fabric);
a small piece of fabric (several harmoniously combined colors can be used, plain canvases can be supplemented with printed ones);
glue;
scissors;
for decoration: twine, buttons, beads, ribbons, lace, etc.

Idea: Instead of buying new fabric, it is better to look for unnecessary pieces among your needlework materials, as well as sort out old, not worn items for a long time. Natural materials will look most cute and gentle: linen, cotton, natural lace.

Necessary materials.

Step by step manufacturing process:

The following photo shows another version of this technique:

burlap decor.

knitted texture

For the next super-simple workshop, you will need an unnecessary knitted item or yarn and knitting needles (if you have knitting skills), as well as a vessel. The bottom line is to make a kind of cover for the container. To do this, you can cut off a sleeve from an unnecessary knitted item if it fits the vessel in diameter. One edge must be carefully tucked up and put on the container - voila, the decor is ready! If you know how to knit, then the original cover can be made in the evening. To avoid seams, it is better to knit on four knitting needles.

Knitted cover for a vase.

By the way, according to the same principle, covers are made for stationery stands, candlesticks, cups and thermoses, and even furniture.

Case variations.

Light bulb mini vase

The next incandescent vase is small in size, so it is suitable for placing a small bouquet or a single color. However, if you make an ensemble of several "vases", you get a very effective picture.

Light bulb vase.

For manufacturing, prepare the following materials and tools:

a few burned out or new light bulbs;
twine or thin braid;
pliers;

Step by step production:

Use a sharp knife to pry off the soldered part (insulation).
Next, you need to remove all the “stuffing” from the light bulb: the stem, electrodes, thread. It is important not to damage the base.
Next, you need to wind the twine around the base and make a small loop - our vase cannot stand, so it will have to be hung.

Manufacturing process.

This product is ready! It remains to do the manipulations with the remaining light bulbs, and make a kit.

Ready product.

An ensemble located on a tree of branches will look very original:

Ensemble of vases made of light bulbs.

Ensemble

Such a composition looks very festive, elegant, gentle and at the same time, it will take quite a bit of time to create it. The main thing is to choose containers that are identical in size and design. It is undesirable to fasten them with glue - so, if necessary, you can disassemble the ensemble. A much more practical and elegant option would be a beautiful satin or rep ribbon in several turns, tied into a bow. With a narrow neck of containers, only one flower can be inserted into each.

An ensemble of containers.

Putty decor

In conclusion, we will tell you how to decorate the vessel with putty and paint. If you have some putty left after the repair, this option is just for you!

What you need:

glass vessel of any shape and size;
putty;
acrylic paints and varnish (paints should be in contrasting shades);
floristic mesh;
sponge, fine-grained sandpaper and a small spatula.

Putty decor.

Step by step production:

Video: do-it-yourself putty vase.

Categories

Popular