How to make a paper tube vase. Do-it-yourself floor vase in various techniques. How to make a beautiful floor vase with your own hands at home. Do-it-yourself floor vase from plastic bottles

All kinds of vases are great for decorating the interior. Floor, table, hanging. Of course, you can buy them in the store, but more often than not, beautiful vases can hit your wallet hard. What to do in such a situation when you want a vase, but there is no way to buy it? Make your own cardboard vase!

Usually, real flowers are not placed in cardboard vases, since cardboard lets water through, but for dried flowers and decorative artificial flowers, such vases are perfect!

A handmade vase will turn out to be an interesting and entertaining pastime, and the result will delight you and your loved ones. We offer you several master classes on creating cardboard vases on your own, you will find the execution schemes below.

Floor decoration

To create a beautiful floor vase with your own hands, we need:

cardboard tube;
corrugated or thick cardboard;
PVA glue and hot glue;
scissors;
newspapers;
putty;
sandpaper.

From a cardboard tube we create the base of a vase. It can be cut to the desired size.

Now we will make the curly walls of the vase. To do this, draw and cut blanks on thick cardboard. You need to make them as much as possible to make the vase strong.

We glue the pipe to the base (cut a circle of a larger diameter than the pipe itself). We glue the blanks around the entire perimeter of the vase, as shown in the photo.

Prepare newspapers. We cut wide strips of them and with the help of PVA glue we glue our entire vase blank. Apply again with glue and leave to dry. Then we will process the papier-mâché shape: level it and dry it near the battery for at least a day, preferably more.

And finally, the last step is painting the vase. You can choose one or more colors and paint the vase in any way. Paint is best taken waterproof acrylic or varnish.

A beautiful and original DIY floor vase is ready!

In order to make such an interesting vase, we will need the following materials:

cardboard tube;
sheet cardboard;
PVA glue and hot glue;
newspapers;
paints;

We measure the desired length of the pipe. You can make a table or floor vase. The bottom is cut out of cardboard and glued with hot glue, let dry.

Our vase will be made of cardboard and paper, so the next step is to take newspapers and cut narrow strips of paper. We fold each strip in half, and then twist it into spirals, smearing it with PVA glue or hot glue. Glue them to the cardboard tube. The space between the spirals can be filled with beads or beads, or you can use cereals or beans.

After all the spirals are glued and the glue has dried, you can start painting. We apply several layers of paint on a vase, leave it to dry completely. Then we apply several layers of varnish, wait until it dries.

The vase is ready!

small vase

Such a vase made of cardboard looks very interesting. It is made as simple as possible, and to create it you will need:

cardboard box;
glue;
compass;
scissors;

First of all, we will cut the box into parts to make it easier to work with. Then draw circles with a compass. Their size will depend on the size of your vase. You can make it as big or small as you like. We start with the largest circle. Each next circle should be 3 mm smaller. A vase can be assembled in different shapes - narrowed to the bottom or to the top. Cut out the circles. And we begin to collect our vase. Depending on how you decide to assemble the vase, we put the circles on top of each other, pre-lubricating each of them with glue.

The vase is ready. It can be covered with paint and then varnish, or you can use only varnish, preserving the original color of the cardboard and its texture. Looks very stylish!

Moreover, such a vase can be adapted not only for flowers, but also for anything.

Cardboard strings

To create such an interesting decorative vase, take:

cardboard tube;
thick cardboard for the bottom;
leg-split;
PVA glue;
acrylic spray paint of any color.

We cut the pipe to the desired height of the vase, cut out a circle of slightly larger diameter from cardboard than the pipe - this will be the bottom of the vase. Instead of cardboard, you can take a piece of plywood. Glue the bottom to the cardboard tube with glue. It is best to take building glue.

In a container, dilute the glue with a small amount of water, put the twine thread into the container until the material is completely impregnated.

For such decoration, only natural twine is suitable, since synthetic twine simply simply does not soak and stick.

Now we wrap the pipe with impregnated threads from the bottom up. Wrap tightly so that there are no gaps between the threads.

Let's move on to painting the vase. Spray paint is best to paint the product on the balcony or on the street. It is best to cover the surface and the space around with paper or cling film, put on gloves on your hands.

Such interesting vases can be created with your own hands, using only cardboard, fantasy and some decorative elements. Great!

Video on the topic of the article

Watch the video compilation for inspiration.

After repairs, there is always a lot of garbage in the house, but you should not rush to throw it away, because among it there will definitely be some interesting items that, after decorating, can look like great accessories. An example of this are pipes that can be turned into stunning vases. Next, we'll look at several ways to do this.

Vases from plastic pipes

stocking decoration

First of all, consider how a vase is made from a plastic pipe with your own hands. For these purposes, it is best.

So the instruction looks like this:

If there is a segment longer than 60 cm, it must be divided into 3 parts.
Next, the ends of the blanks need to be cut obliquely.
Then you need to soak the stockings with PVA glue and squeeze out the excess suspension.
After that, the stockings need to be pulled over the pipes to end up with twisted folds.. In this form, the product must be left until the glue dries.
Further actions depend solely on your imagination, for example, products can be painted with different colors and glued together. For stability, a cardboard circle or square can be glued to their bottom. As a decor for crafts, beads, beads, small seashells, etc. are an excellent option.

The result will be a very beautiful product that will look expensive, despite the fact that the price of materials is minimal.

In the photo - the implementation of the combined decor

Combined decoration

The technique for performing the product in this case does not differ from the one described above. The differences are only in the way of decoration.

The process looks like this:

The stockings are stretched from below and above the blanks, and a “naked” area remains in the middle.
The space between the stockings must be smeared with PVA glue.
Next, the surface treated with glue should be sprinkled with grits. Which one is up to you to decide.

After the glue hardens, the blanks need to be glued and painted. For stability, you can make a cardboard stand and paint it in a suitable color.

This completes the manufacturing process.

From a metal pipe

If the edges of the metal pipe are evenly sawn off, then it is also suitable for our purposes. The best option is to prepare it immediately with a stand.

Below we consider one of the options for how to make a floor vase with your own hands from a pipe of this type:

First of all, the blank must be pasted over with ordinary toilet paper. In this case, small folds are allowed.
Then two layers of black paint should be applied to the paper.
After that, over the black paint, you need to apply varnish with bronze powder.
Additionally, the product can be decorated with beads or glass beads.
To complete the bottom, you will need mounting foam. The craft must be placed on a plastic stand and direct the stream of foam down. When the foam hardens, it can be tinted with spray paint.

Advice!
Unusual edges of the product can be made using a welding machine, simply by melting them.
As a result, they will turn into a fancy lace.

Of course, such a product is not intended for fresh flowers, since it will not be possible to pour water into the container, but the composition of dried flowers in such a vase will look very interesting.

From a cardboard tube

Manufacturers of linoleum, when packing it inside the roll, lay a pipe made of thick cardboard, which is an excellent material for making a vase. As always, to get an original result, you just need to show a little imagination.

Below we will consider one of the options for making a vase from a cardboard tube with your own hands. Before starting work, the following materials must be prepared for this product:

So, the work is done in the following order:

As in the case of plastic products, in order to make vases from pipes from linoleum with your own hands, you first need to cut a cardboard blank into three parts.
Next, all three parts must be glued with PVA glue and pulled together with copper wire.
Without waiting for the glue to dry, you need to stick masking tape on the joints.
After a day, when the glue finally hardens, the copper wire should be removed, after which the workpieces should be wrapped with a cloth dipped in PVA. In this case, you need to form folds.
When the fabric dries, it must be painted with bronze paint. You can use the composition in a spray can.
When the paint dries, you need to “walk” over the entire relief with acrylic gold paint to give the vase a shine.
At the end of the work, the vase can be decorated with twine or other decorative elements.

On this floor vase from a pipe from linoleum is ready. Of course, it is not necessary to perform all the steps exactly. Based on this idea, you can experiment and come up with your own product design.

Often, after repair, pieces of materials, coatings remain, for example, the remains of linoleum, pipes. They can be used to create a unique decor for decorating a room. For example, a flower vase can be made using not quite ordinary materials. A pipe, linoleum, cardboard boxes, profiled or plastic residues are used. With their help, it is easy to create a unique craft and decorate your home, using simple, improvised means. An unusual designer vase can be made in a short amount of time without any financial outlay.

A vase for which a pipe is used: a master class

How to make vases from pipes? The master class will tell you how to make a floor vase with your own hands from a pipe. A floor vase will be more durable if not thin plastic pipes are used, but a thick pipe, which is usually used to install sewer systems.

You can decorate such a product with your own hands by using old nylon stockings or a cut off part of tights. In the event that the pipe is half a meter long, it must be cut into several identical pieces. The ends of these parts are cut along an oblique line (photo), inserted into each other. After that, a stocking is taken, well soaked in PVA glue, squeezed out. Next, the stocking must be put on the pipe. Let the floor vase dry.

The bottom can be made using cardboard or plastic materials, as well as linoleum, a part of plastic or cardboard is cut out, glued with superglue to the base of the product. The initial design is ready (photo).

The next stage of decoration will require imagination and creativity. A do-it-yourself vase from a pipe can be painted in a variety of colors and shades. A do-it-yourself floor vase, decorated with rhinestones, large and small beads, beads, looks very attractive (video).

Vase from a pipe from linoleum: a master class

How to make a vase using linoleum? In order to make such a craft, you need a piece of unnecessary linoleum. Linoleum is twisted, fixed with adhesive tape. The bottom can also be made using linoleum or cardboard pieces. Pick up, cut, glue or fix in any convenient way.

After that, the floor vase is covered on top with a piece of stocking, pieces of wallpaper or corrugated paper cut to size. Further, it is decorated to your taste and discretion. Do-it-yourself floor vase, for which linoleum became the basis, can be decorated with sea or river shells, beads of different sizes, sequins, beads. It only requires the embodiment of fantasy. The result will be an unusual floor vase made of linoleum pipes, and making it is not difficult at all.

Metal pipe vase: master class

How to make a unique vase from metal pieces? If profiled metal pieces remain, they must be cut exactly along the edge. This pipe will become the basis for a durable product. They take toilet paper or paper towels, glue the pipe over the entire diameter, no empty spaces should be visible. You can create small folds in parallel. Next, dark paint is required, the pipe is painted with it. The paint is applied in two layers, the second layer is applied after the previous one has dried.

Instead of black paint, you can take dark blue, deep turquoise, blue, or purple. But in this case, you need to make more layers for full staining. Each layer will saturate the previous one. It is important that the metal pipe is not visible behind the layers of paint.

Further, the floor vase is decorated with beads, beads, beautiful buttons. The bottom of the vase can be made in an interesting way - polyurethane foam and profile pieces or a single piece of a metal base are taken. The floor vase is placed on a stand, the gap between the bottom and the product is sealed with mounting foam. When the foam dries well, you can decorate the product. Often, paint from a spray can is used for this - this is how a PVC craft will be beautiful and unusual, it will decorate any room. In addition, PVC makes the product durable. Due to the fact that the bottom is fixed with mounting foam, you can not be afraid of damage during transportation.

How to create a beautiful vase from a cardboard tube

If there is a thick cardboard tube, you can also make a beautiful product out of it, which will become the highlight of the room. You will need such materials and tools: glue (any, but it is better to take PVA), masking tape (it is used to connect cardboard pieces to each other, and also to hide the joints of pipe pieces). For decor, you can use any type of fabric. In addition, you will need paint - bronze or gold (but in general this is optional, depending on the previously invented option).

You will also need materials to further decorate the vase. A cardboard pipe can be decorated with small or large beads, different sizes and colors of beads, beautiful buttons, sequins. The cardboard pipe is cut into three equal parts (the work is performed similarly to a plastic pipe). Further, with the help of a wire or by gluing with glue, the pieces are connected. After that, the cardboard base is impregnated with glue, wrapped with masking tape on top. Then you need to wait for the complete drying of the finished product. This will take days.

After a day, you can start decorating the dried product. From above, you can fit the pipe with a pre-selected fabric. Measure a piece of fabric to the size of the pipe, soak the fabric with glue, and then wrap the vase, creating light folds. Then again you need to wait until the vase is completely dry. After that, you can proceed to staining with golden or bronze paint. In addition to conventional acrylic paints, you can use spray paint. When the bronze layer of paint dries, a layer of golden paint is applied on top.

Thanks to such techniques, the product will shimmer and sparkle beautifully. At the end, you can add a couple of beads, buttons, and other decor details.

May 29, 2016
Specialization: philological education. Experience as a builder - 20 years. Of these, for the last 15 years he led a brigade as a foreman. I know everything about construction - from design and the zero cycle to interior design. Hobbies: Vocal, psychology, quail breeding.

Greetings, my dear readers. The other day I had a free day, and I wanted to benefit the family hearth. In other words, to earn the praise of the second half by putting things in order at least somewhere.

I opened the pantry and the first thing I did was hit on the head, it’s good that it wasn’t a knockout. I was attached by a pipe from linoleum, left after repair, just in case. Then the second one rolled out, then another bunch of incomprehensibly stored items.

It was a subtle allusion to thick circumstances, which means that I am destined to make something sensible today. I describe the whole process in order to direct your creative potential in the right direction.

Hatching an Idea

Often in my life my ingenuity helped me out, I often used peeped ideas, and here I turn the pipe in my hands and I can’t think of where to apply it. And on TV there is a program about repairs, the final stage is decor. And vases, many vases of original shapes. Here it hit again, I’ll do it, I thought a vase.

How a muse comes to a creative person

At first, I wanted to make two or three crafts from a linoleum pipe, cutting it into pieces. Then I thought about it, I wanted to pile a large outdoor flowerpot. “The beautiful will be brighter”, more presentable, and more flowers will fit.
I was puzzled by the material - pressed paper. You can’t pour water there, you only have to insert a dry bouquet or branches. But here an idea was born, about which a little later.

Since the material is paper, it means that ordinary stationery glue or PVA is suitable for processing it.
At worst, you can cook homemade paste.

Pour the cheapest flour with water, stir until smooth and bring to a boil. Which I did, because I was too lazy to go to the store.
Next, memories of childhood surfaced, how papier-mâché was made from scraps of newspapers and paste with my mother. As far as I remember, the products turned out to be durable, and they were painted easily.
And so he did. Narwhal old newspapers, soaked the pieces in a bowl of water and went to breakfast, because the excitement that had arisen in the morning began to brazenly interrupt thoughts of a culinary nature.

Preparation of materials

On a full stomach and the matter is argued, I climbed back into the pantry for additions. Children's molds for the sandbox in the form of starfish and octopuses came to hand. Yeah, if so, then my future vases from pipes from linoleum should be made in a marine theme.

Well, if not all, then at least one of them “smells like the sea”.

I prepared an old twisted hemp rope, pulled real shells brought from vacation from the depths of the chest of drawers.
Only watercolors and gouache were found in the house, I would not like to see a smeared vase in the near future, apparently, I will have to go to the store. Construction is far away, but stationery is literally under the window.

I bought a set of acrylic paints, brushes, and at the same time PVA in a small container (but you won’t need a lot).
While the second half is not at home, I literally stole manicure sparkles, a lurex coil and a bag of rhinestones from her stocks. If I get caught stealing, I’ll say that a magpie flew into the house, barely kicked it out!
Yes, I forgot about an important accessory. In the pantry, there was a bundle of old nylon stockings and tights. The thrifty mother-in-law hid to keep the bow in them. Just in case, the fireman pulled them out, maybe they will fit.

creative process

All the tools were at home - scissors, pencil, tape measure, hacksaw, sandpaper. The necessary materials: rags, several pieces of cardboard and a bag with the remains of dry alabaster, were also available at home. In general, here is the whole set.

how i made the vase

The pipe in a vertical position turned out to be quite high, I still had to cut off the excess. I wanted the neck of the vase obliquely, so original and elegant. I marked it out, cut it off with a hacksaw like a sausage for a holiday, and it turned out to be a meter-high blank.
Next, I had to come up with a foundation for greater stability. I cut off a circle from a piece of fiberboard with a diameter of 15 cm larger than the diameter of the pipe itself.
To properly glue the rack to the base, there is one proven instruction. The thin walls of the pipe will not stick firmly enough if you do not make an elementary thick filler.
The newspaper scraps did not impress me with their rudeness, I had to “snatch” half a roll of toilet paper. I soaked the paper with PVA slightly diluted with water, adding two tablespoons of alabaster. The last ingredient will speed up the solidification of the mass.

On the marked center of the base, he laid out a slide of paper-glue dough and literally “slapped” a pipe into it. Quickly, until the mass hardened, leveled it at the seams from the outside and from the inside. The length of the arm to the bottom was not enough, he rescued the handle from the mop, and tamped it down. On the raw product, I checked the vertical with a plumb line from all sides.

At this stage, you can insert a waterproof container of a suitable size inside. For example, a plastic pipe sealed from the lower end or a strong narrow and long plastic bag. In this case, the vase is suitable not only for dried, but also for fresh flowers standing in water.

Half an hour later, the pipe stood as if rooted to the spot, and this could not but rejoice. Mobility and stability achieved. The best part is decorating.
After sitting with a cup of coffee and thinking, I decided to rob my mother-in-law for a couple of old stockings (these were left for the bow). I chose black ones, and, overcoming the desire to go and frighten the scandalous neighbor from above, put them on not on my head, but on a pipe smeared with glue.

The whole thing took three pairs of stockings with cut off socks. If you take less, there will be few folds, namely they gave originality. Along the way, I decided to leave two gaps between the folds, here I wound the twine on wet glue.
In a draft, my semi-finished floor vase dried out in about an hour. During this time, from the soaked pieces of newspapers, paste with the addition of alabaster, I kneaded the "dough".
I smeared the molds for the sandbox with vegetable oil and filled them with mass, carefully compacting and leveling. You can pull it out right away, just be careful. Half-baked and still flexible blanks are more convenient to glue to the semicircular walls of the pipe, which I hastened to do.
Time was leaning towards dinner, I wanted an enchanting presentation of beauty, made by myself, in front of my family. I painted the folds with a semi-dry brush with silver acrylic paint “on the tops” and sprinkled with sparkles. I painted the starfish in blue, walked along the rope with golden paint.

Seashells filled with papier-mâché dough were successfully placed on empty seats, small gaps were supplemented with rhinestones. In the end, it turned out very solidly, a sort of theme of a hot summer night on a sea sandy beach.

My 8 crafts

In the process of work, I came up with a dozen ideas for using unnecessary pipes. The price of the components is zero or scanty, and the pleasure and benefits are incommensurably greater. The evening display of my product was all the more joyful because I received as a reward the stormy delight of my mother-in-law and wife who arrived from the dacha, and I was even pardoned for unauthorized stockings and rhinestones.

And here is what came to mind during the creative day:

Vases in style and decoration can have an infinite number of options.. Moreover, it is interesting to match the design to the style of your interior. Color and accessories that match the design of the room - and here you have an exclusive item.
A vase stylized as a birch trunk looks great. Mushrooms molded from papier-mâché will settle on an imitated saw cut.

The work is a little more difficult - Roman amphora. Here you will have to cut out many identical profiles of the desired shape from cardboard and glue them to the base. After the design is covered with fabric or tape and painted.
A lot of use from the pipe and in the corridor. It is convenient to store umbrellas and canes, fishing rods and even a selfie stick in it.

By the New Year, together with the children, make a Christmas tree. The pipe will serve as a trunk, but the rest is easy to figure out for yourself, in the family circle. You can decorate the nursery with an ordinary tree from a pipe.
I advise avid cat lovers to make a scratching post for a pet. The pipe is coated with glue and wrapped with a strong rope.
The flower garden on the balcony can also be made from pipes. They are horizontal, the ends are sealed, in the upper part a strip is cut off along the entire length. The pipe is lined with polyethylene, soil is filled up and flowers are planted.
A container for storing small children's toys, because there are a lot of them around the house. There will be something to do on a free day with a child, making out and decorating a new item in the children's room.

Conclusion

If you are bored on the weekend and have nothing to do, look on the balcony, in the barn, garage or storage room. There are sure to be items worthy of your creative attention. Believe me, there is nothing more pleasant than to please yourself and your family with a useful thing, made almost at no cost and on your own.

You will find a lot of interesting things in the video in this article. Ask questions, if any, in the comments. I say goodbye and good luck in your endeavours.

May 29, 2016

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

DIY vase

I'm all about the same thing: how to make a good thing out of junk material.
Who doesn't know about those thick cardboard tubes that remain in the store after all the linoleum has been unwound from them?
I think everyone knows. Throw them away after use.
But I came up with something. My hands are crazy
1. I sawed off the pipe of the required height (it is easy to saw, cardboard because), I cut out a circle of larger diameter from corrugated cardboard and glued the bottom to the future vase.

2. I made my favorite dough. 1 part flour, 1 part salt. I used PVA glue instead of water. When dry, the dough becomes like a stone. (The dough is made on the basis of PVA glue. Therefore, you don’t need to specially prepare the pipe. Just smear it with glue in the place where you want to apply the stucco element. The cardboard itself will begin to absorb the glue, first applied, and then “suck” it out of the dough. The dough sticks tightly .)

3. I sculpt and glue, sculpt and glue. I only wanted to decorate the lower part of the vase with stucco, but I got carried away and decorated it all.

4. I also came up with the upper part. That's how it happened.

5. The dough dries completely in 3-4 days. Sorry, I didn't take a photo here. But something like white stucco on dark cardboard.
6. I covered the dried vase with a white matte water-based emulsion. It is better to apply 2-3 layers of paint, then the dark background will be completely painted over. Don't forget about the inner walls. I painted over as much as the brush took out.
7. It seemed to me bored that she was white. Therefore, I tinted a little paint and shaded the flowers and leaves.
8. After the vase was covered with two layers of varnish. It is very similar to porcelain.

Of course, you can’t pour water into such a vase. But the dry winter bouquet, which I make every summer, looks great in such a porcelain floor vase!
Author Olya.
Only inside it is necessary to pour stones or something else to make the bottom heavier. Otherwise, it will somersault under the weight of the pot and make the bottom larger than the diameter of the pipe.

AND FURTHER)))
There is such a wonderful artist Natalya Vorobyova. I don't know professional or nugget
See for yourself. This is a dot painting with acrylic contours.
Did you recognize toilet paper and towel rolls?

Categories

Popular