Laminate with or without chamfer - which is better? Master's opinion. Laminate with double-sided chamfer U-shaped chamfer - description, advantages, disadvantages

Beveled laminate is a relatively new finishing material. It has a lot of advantages, but causes some controversy. We offer to understand the features of this coverage.

Design features and types of chamfers

This type of laminate has bevels on both sides of each board. They can be V- or U-shaped. They are performed both by cutting (that is, milling) and by pressing. The second method is mainly used for processing flooring. It allows you to achieve increased board strength at the edges and prevent premature wear of the floor. There are also artistic chamfers that have an unusual shape, but so far this is a rarity.

Chamfers vary in depth:

• micro (deepening up to 1 mm);
• deep (up to 3.5 mm).

The U-shaped chamfer can be no deeper than 2 mm.

Even deep 2 bevels do not accumulate as much dirt as people who choose a laminate for an apartment or house fear. To prevent this from happening at all, and also to have a reliable barrier to water, manufacturers advise treating joints with wax and other protective compounds - dirt and water repellent. With or without treatment, the coating, like the usual one, tolerates wet cleaning well. It is only necessary to purchase a high-quality mop that collects excess water well. A small nuance exists only with dry cleaning - it will not be possible to sweep the floor on which the laminate with a chamfer is laid, you will only have to use a vacuum cleaner.

Features of a laminate with a 2-sided chamfer

Such a floor covering can visually lengthen the room if laid along a long wall. And also visually expand it when mounted along a short wall.

This laminate, being a fairly budget-friendly finishing material, reliably imitates precious wood coatings. That is, it creates a complete feeling that a floorboard or expensive parquet is laid in the room. To create an imitation of a plank floor, you need to choose lamellas of standard width, while narrower ones effectively imitate parquet.

Laminate with 2V bevel has other features:

• visually eliminates the height difference;
• hides cracks, thereby retaining its original appearance longer;
• does not "walk";
• if the panels swell from moisture, it will not be noticeable;
• not susceptible to temperature changes during the change of seasons.

The wide variety of such a popular flooring as laminate, on the one hand, makes it affordable and makes it easier to choose the right option. On the other hand, laminate differs not only in appearance and strength class, but also in design features. Therefore, in order not to make a mistake and choose exactly the laminate that will fully meet the operational and aesthetic requirements, you need to know that there is a laminate with and without a chamfer.

Each type of laminate has its own characteristics. This should be taken into account when designing the interior of the premises and choosing a laminate flooring.

So which flooring is better: laminate with or without chamfer? To understand this, let's try to find out how these types of laminated coatings differ, and determine their advantages and disadvantages.

What is a bevel on a laminate

Bevelled laminate appeared on the domestic market much later than its traditional models, and almost immediately caused a lot of controversy regarding its strength and practicality. Time has shown that in terms of its performance characteristics it is in no way inferior to conventional laminate, and in some moments even surpasses it.

A bevel on a laminate is a small indentation along the edge of a laminate board. Thanks to this constructive solution, bevelled laminate allows you to create the effect of wooden floors from solid boards, and such a floor looks very natural. If we talk about design possibilities, then at the same price this material surpasses other types of laminate. The recess along the edge of the laminate is done by milling or pressing. The strength of the material does not suffer from this, and in the case of pressing it even increases.

Laminate with a chamfer is of two types:

• Laminate with double-sided chamfer - there are recesses on both sides of the panels.
• Laminate with a four-sided chamfer - there are recesses along the perimeter of the panels.

Chamfers on the laminate are of the following types:

• U-shaped fax machine
• V-groove
• deep bevel
• wide chamfer
• Micro bevel (deepening by 1 mm)

Features of beveled laminate

When connecting laminated panels with a chamfer to each other, a small groove remains at the joints, which creates a unique effect of a massive parquet board or wooden floor. During the operation of such a laminate, it is recommended to protect the chamfers from moisture by waxing them from time to time. Given that they are quite small, you should not worry about accumulations of dust and dirt in the joints. Today, there is a wide variety of beveled laminate panels, including an exclusive square laminate that mimics ceramic floor tiles but has a distinctive wood grain.

Benefits of beveled laminate

When using this type of laminate flooring:

• Clearly defined panel borders
• It is possible to realistically imitate a floor from a natural board
• Floor covering retains its original appearance longer
• The area of ​​​​the room visually increases
• The floor is more resistant to external influences
• There are no cracks at the joints even after many years
• The appearance is not affected by thermal expansion
• Can be laid on relatively uneven surfaces
• It is possible to hide swollen joints after water gets on them
• No extra care required
• Create an elegant and stylish interior

Features of laminate without chamfer

If we talk about traditional flooring, the laminate without chamfer allows you to get a perfectly flat surface and create a visual effect of the solidity of the floor, since the panels have clear rectangular cuts. It should be said that in terms of its performance, such a material is no worse than a chamfered laminate, but it has some drawbacks. If moisture gets on the seams, they can swell. Even with a minimal change in shape, such a defect will be noticeable on a perfectly flat floor. The deformation of the seams with seasonal changes in temperature will also be noticeable. Otherwise, laminate flooring without chamfers is no worse. In addition, when laying this material, there are no restrictions in terms of implementing the most unusual design ideas.

In order to achieve a flooring that does not differ from natural parquet, it is best to use a narrow beveled laminate, designed specifically for this.

Laying laminate with and without chamfer

The thinner edge of a chamfered laminate can raise concerns about the strength of the material. However, its edges are additionally processed with compounds that strengthen them, increase the strength and moisture resistance of the edges. Soaking into the array, such compositions create an unusually strong outer layer of the laminate, therefore, with a chamfer, it fully corresponds to the strength class of a laminate without a chamfer.

Laying laminate with a bevel is practically no different from installing a conventional laminate floor. It is carried out on a solid, dry and pre-leveled base. Traditional materials are used as a waterproofing and compensation layer. Beveled laminate installation methods are limited only by the direction: since the material is supposed to imitate a wooden floor, the flooring cannot be figured, and laying at an angle looks very unpresentable.

For those who doubt the strength of beveled laminate, we recommend that you give preference to laminate 33 strength class, which can be used in almost any room.

Installing beveled laminate has some advantages. For its laying, a perfectly even base is not required, the differences can reach 3-4 mm. But the installation of a laminate without a chamfer requires the presence of the most even surface, the differences of which should be no more than 2-3 mm. Otherwise, the surface will not be solid and the laminate may diverge at the seams. In a beveled laminate, this problem can be solved by the shape of the planks.

Bevelled laminate

Laminate without bevel

• Laminate with recesses contributes to the visual increase in the area of ​​\u200b\u200bthe room.

  If you plan to extend the room, choose a double-sided chamfer, a laminate with four-sided cuts - it will visually make the room wider.

The variety of different variations in the execution of chamfers, presented on the modern market, can confuse a professional. Therefore, before making a choice, study, compare different offers.

Laminate with or without chamfer

There are plenty to choose from.

• V-shaped. The corner on the panel is cut exactly at an angle, the lines are clear and straight. When connecting adjacent boards, a V-shaped notch is formed, this gave the name to the presented version. The recess depth is 2-3.5 mm;

V-groove laminate

U-bevel on laminate

Chamfer dimensions

Outcome

Laminate with a chamfer: photo

The main difference between a parquet board is that the wood is only in its top layer. It is for this reason that the price of such material is much lower than for ordinary parquet, which is a significant plus in favor of its choice. In addition, such a material can convey the tactile sensations of touching wood as fully as possible, so that external differences from parquet are not at all noticeable.

Previously, the process of making a chamfer was carried out using special tools, first of all, a planer was used for this, which simply removed a layer from the edge of the material.

Laminate with a chamfer - an interesting floor design

At the moment, this process is fully automated, and only modern equipment is used for chamfering. But in any case, a parquet board with a chamfer is always highly valued in our market.

decorative properties.

Types of bevels.

• Chamfer 2 mm.

06/09/2014 at 12:06

In the domestic flooring market, laminate is represented by a huge selection of design solutions - we are talking not only about the features of the texture, color shades, but also about the shape of the laminate boards. Lamellas can be with a flat surface and sharp corners or with a chamfer representing the beveled edge of the board.

It seems that such an insignificant detail is a chamfer, and how many disputes are around the need for this element. If you are reading this article, you probably cannot determine whether you need a laminate with a chamfer or without, which one is better, what advantages of choice you can count on, preferring panels with a notch along the edges. We have tried to answer the most popular questions so that you can make an objective, guaranteed good choice.

Chamfers on laminate flooring: luxury or necessity?

If a notch as an element of finishing laminate boards has appeared on the modern market, then someone needs it? So, for someone, the beveled edge on the floor slats is of interest? Yes. And there is a lot of interest. A slight improvement in the shape of the laminate panel significantly expands the range of advantages of the chosen floor.

• The main purpose of the beveled edge is to make the laminate more like natural wood. The monolithic floor covering without gaps emphasizes the artificial character of the floor. You don't need it? Do you want your flooring to look expensive and luxurious? Chamfers will make the laminate as similar as possible to a plank natural floor, visually separating the boards from each other.

Bevelled laminate

• Thanks to the chamfers, the gaps that appear in any natural wood laminate, whether it is a massive board or parquet slabs, become almost imperceptible. After years of heavy use, a beveled floor will look like you bought it yesterday.
• Often, lamellas with cut edges are presented in laminate collections from solid boards: manufacturers, cutting off the corners of the slats, eliminate various processing defects. The presence of a recess minimizes the risk of chipping along the edges of the boards, and this has a positive effect on the functional characteristics of the floor.
• Chamfers visually smooth out height differences caused by an uneven base.

Laminate without bevel

• Laminate with recesses contributes to the visual increase in the area of ​​\u200b\u200bthe room. If you plan to extend the room, choose a double-sided chamfer, a laminate with four-sided cuts - it will visually make the room wider.

Types of chamfers: features and benefits

The variety of different variations in the execution of chamfers, presented on the modern market, can confuse a professional. Therefore, before making a choice, study, compare different offers. There are plenty to choose from.

Depending on the technology for cutting the corner, chamfers are distinguished:

• V-shaped. The corner on the panel is cut exactly at an angle, the lines are clear and straight.

  How does a laminate with a chamfer look in the interior

  When connecting adjacent boards, a V-shaped notch is formed, this gave the name to the presented version. The recess depth is 2-3.5 mm;

V-groove laminate

• U-shaped. The result of creating a curly, rounded slice. Chamfer depth - up to 2 mm.

U-bevel on laminate

If we take the depth of the recess as a distinguishing feature, microbevels (1-2 mm) and deep sections (from 2 mm) are distinguished.

Different application technologies allow you to get different types of chamfers. Milling with shear grinding is a way to create a contoured edge. The rolled chamfer is created by rolling extrusion. On the modern market, the rolled version is more common; milling technology is usually used to work with natural wood.

Chamfer dimensions

Models are also distinguished by the number of cuts: there are double-sided chamfers formed along the long sides of the boards, or four-sided - boards where all sides, including the ends, have recesses.

Let's talk about the disadvantages of beveled laminate

When choosing which laminate is better, with or without a chamfer, do not forget about the possible disadvantages so that a successful purchase does not bring a lot of unpleasant surprises later.

The main concern that buyers mention when choosing between bevelled and non-beveled laminate is the possible future difficulties in cleaning. If laminate panels with bevelled cuts are laid on the floor, the recesses will become clogged with dust and dirt. But keep in mind: the grooves between the lamellas are small, and manufacturers process the edges with moisture-, dirt-repellent compounds - the problem is not as significant as it might seem. Sweeping a floor with recesses is more difficult, but if you take a vacuum cleaner, you will not feel any difference.

Another concern: bevels make the floor more vulnerable to moisture, as they increase the area of ​​the floor in contact with water. If we are talking about a high-quality laminate with reliable locks, the entire surface of which is treated with a moisture-repellent composition, the presence or absence of bevels does not matter.

There is an opinion: beveled edges are more sensitive to stress and bevelled laminate will be more fragile. But not everything is so simple: recesses are usually made on thick panels (from 10 mm) and the cut depth in relation to the total thickness of the board is small - it will not affect the strength of the floor. Edges with a rolled chamfer are even stronger due to pressing.

Outcome

There are no significant differences in laying technology, in characteristics, in cost between a laminate with a beveled cut and without. A chamfer is a design element that allows you to make the floor visually more expensive. When choosing a laminate with or without a chamfer, be guided solely by your preferences, the style in which the interior of the room is designed.

In the Tetrum online store you can choose a laminate with a U-bevel from two collections: Praktik and Parafloor.

Laminate with a chamfer: photo

Due to its features, the parquet board is always an excellent choice for lovers of natural materials who want to significantly ennoble their home. The parquet board not only repeats the appearance of a natural wooden floor, but also allows you to significantly save your money on the installation of flooring.

The main difference between a parquet board is that the wood is only in its top layer.

Beveled laminate flooring

It is for this reason that the price of such material is much lower than for ordinary parquet, which is a significant plus in favor of its choice. In addition, such a material can convey the tactile sensations of touching wood as fully as possible, so that external differences from parquet are not at all noticeable.

Chamfer on the boards and its features.

When purchasing a parquet board, buyers pay attention to a huge number of factors that can affect the choice. Everything is taken into account - color, styling technology and even the manufacturer. But at the same time, special attention is always paid to the presence of a chamfer on the board, which is a very important element of it.

Thus, some boards are processed additionally, which makes it possible to give them the best aesthetic and quality characteristics.

Usually, for the manufacture of chamfers, boards are used that have a top layer of natural veneer, because this material allows you to provide the best performance for this element.

As a rule, the chamfer is usually made in the form of a V-shaped cutout, which improves the characteristics of the board. The chamfer reduces the size of possible gaps that may appear due to high humidity or high temperature.

Previously, the process of making a chamfer was carried out using special tools, first of all, a planer was used for this, which simply removed a layer from the edge of the material. At the moment, this process is fully automated, and only modern equipment is used for chamfering. But in any case, a parquet board with a chamfer is always highly valued in our market.

decorative properties.

The chamfer is also used to decorate the parquet floor, and its main task is to give it massiveness. So, if the parquet boards do not have chamfers, then the flooring simply merges into a single whole, which does not allow creating the effect of a wooden floor. Beveling makes it possible to highlight and emphasize the gaps between the boards, which helps to create the effect of a natural wooden floor.

In addition, if a two-sided chamfer is applied to the parquet board, then the room is significantly lengthened. If chamfers are applied on all four sides of the board, then the interior space of the room expands.

We also note the fact that the best option would be to use a chamfer for the floor from boards of different lengths. This structure of the flooring looks much more natural and natural.

At home, you can apply a chamfer with a planer, which allows you to independently choose the most suitable location for these elements. In addition, along with chamfers, special methods can be used to visually age the parquet board, which allows you to achieve the greatest effect of a plank wooden floor.

Types of bevels.

Depending on the type of chamfer, its size and processing method, these elements can be divided into several types at once:

• A small bevel of 1 mm is called micro.
• Chamfer 2 mm.
• More than 3 millimeters, including beaten or rolled chamfer.

The specific properties of this element.

A parquet board with a chamfer has a large number of useful properties, which definitely need to be discussed in more detail.

Firstly, the use of a chamfer allows you to visually minimize all the shortcomings and errors made during installation. Often it almost completely eliminates the need for floor sanding, which is used to minimize floor defects.

As already mentioned, the use of a chamfer helps prevent deformation of the parquet board. Due to its application, there is much more room for possible expansion of the boards due to high humidity or temperature. This is a significant advantage of using this element for parquet boards.

It is worth noting the fact that before delivery of the board with a chamfer, this element is pre-painted. Very often it is laminated, and this method has a large number of advantages. First of all, lamination perfectly protects the bevel from all external influences and increases mechanical strength.

Thus, parquet boards with bevels will be an excellent choice for flooring!

06/09/2014 at 12:06

Bevelled laminate: advantages and disadvantages
Chamfer types
The choice of flooring
The nuances of laying a laminate with a chamfer
Styling tips

The article will focus on a laminate without a chamfer - what it is, what are the advantages and disadvantages of this element, as well as the process of laying a laminate with a chamfer. There are no special differences in cost between the two coverage options, so you will have to build your choice on the features described below.

Bevelled laminate: advantages and disadvantages

Laminate is a popular flooring that is increasingly being used in refurbished homes and is replacing outdated flooring. Many owners, when choosing it, are faced with such a concept as a chamfer. Many people need to be clear about what is at stake.

In fact, the beveled edges of the laminate boards were designated by this name. Many believe that such a design of a unit of material will create a more beautiful floor covering that will not be ashamed to be shown in a photo or presented to guests. However, the beveled laminate in the interior, in addition to the decorative task, also has a certain practical significance.

The main advantages of having beveled edges:

• after some time after the start of using floors with laminate, small gaps appear in the coating, but the chamfer perfectly masks the resulting defects and visually keeps the floor completely new for a much longer period of time;
• traditional low-quality laminate boards are distinguished by defects at the cut points, but this is not possible when creating a chamfer, because. sections are purposefully processed during production;
• the chamfer is a kind of shock absorber, reducing the load on the coating due to the special design and installation method. This property of the element acquires the maximum value when using a class 32 laminate, designed for rooms with a large number of visitors and public places.

As for the disadvantages of such a coating, among users there is an opinion that it is difficult to clean it. Not many people know how to clean a particularly light laminate with a chamfer from dirt that has clogged into the seams between the boards and greatly spoils the appearance of the flooring.

But, in fact, all this is fiction, since the width of the seam does not exceed 2.5 millimeters, and such a small area cannot be clogged with dirt. The only condition for cleaning is the correct sequence of actions: first, the bevelled laminate is vacuumed and only then washed. In this case, the floors will be clean and will last much longer.

Chamfer types

To date, the construction market is filled with 2- and 4-sided chamfers. In the first case, only the longitudinal edges are beveled, and in the second, the entire perimeter is processed. There is no significant functional difference between the two laminate options.

However, there is an opinion that a four-faced laminate has increased versatility and can be laid anywhere, regardless of the parameters of the room. The shaped structure of the chamfer is an excellent addition to the design and gives the flooring the look of real wood.

The choice of a laminate with a chamfer (and without) remains with the buyer, but, for example, in European countries, there is more interest in a laminate board with beveled edges. The domestic construction market has not yet seen much demand for this type of flooring, but solely because of the novelty of the material, and not its poor quality.

The main types of chamfers on the laminate have individual characteristics:

• curly. Figures chamfer give by cutting off certain parts of it. In any case, the edges are perfectly sanded to achieve the smoothest and most uniform flooring possible in every area.
• Rolled chamfer- this is a beveled edging of the board, obtained by extruding the necessary bends using special rollers.

The rolling method is much better than curly cutting, because:

• the cost of the board is lower;
• the protective coating remains intact at the corners of the board, unlike where the edges have been cut on the machine.

The depth of the bevel at the edges can be from 1 to 2.5 millimeters. It is worth choosing a specific value of this parameter taking into account the characteristics of the room in which the installation is carried out: changes in temperature and humidity conditions.

The choice of flooring

Comparison of laminate types with and without chamfer:

• in places where the boards of a conventional laminate are joined, there is a reduced moisture resistance of the material (HDF boards). The joint is not intended for wet rooms, therefore, after a while after commissioning, it darkens, swells and rubs. Also, the boards do not always have the same thickness, which means that a laminate without a chamfer gets dirty faster and looks less aesthetically pleasing than with a chamfer. If the joints stand out in the photo and during a visual inspection, then questions may arise about the quality of the floors;
• in turn, the painted flooring with a chamfer is reliably protected from moisture penetration into the joint between the boards.

When choosing a narrow chamfered laminate or any other variety of it, you should consider products from top manufacturers.

Laminate with or without a chamfer - which is better to choose, the features of laying each type

The maximum quality of the board is provided by German and Austrian brands.

The bottom line is that the most famous brands are processed at the production stage with a high-quality acrylic coloring agent, which reliably protects the floors from moisture. Cheap production does not imply the use of such expensive dyes, and therefore the result is appropriate: there is color, but there is no protection.

Nevertheless, individual types of laminate with a chamfer are distinguished by completely individual features. For example, a 12mm chamfered board laminate has an average level of protection against moisture penetration, but at the same time, wear resistance is maximum.

The nuances of laying a laminate with a chamfer

Before laying a laminate with a chamfer, it is necessary to familiarize yourself in detail with the features of its installation and the differences from the same procedure, but in the case of boards without a chamfer. In fact, it makes no sense to consider any special types of chamfered laminate laying, since this process does not have any significant features.

Work is performed in a certain sequence:

• the base for laying is leveled in any existing way, cleaned of dust and dirt, and also dried if there is high humidity;
• the selected substrate under the laminate is laid over the subfloor;
• the laminate itself must be acclimatized before laying. To do this, it is brought into the room where the installation is carried out two days before the start of work. This is necessary in order for the coating to gain its optimal proportions under the conditions of the existing temperature and humidity conditions;
• laying begins with an indent of 1-1.5 centimeters from the wall to compensate for possible expansion with increasing temperature. To maintain the ideal thickness of the gap between the wall and the flooring, you can use the insertion of laminate boards. It is best to start work from the far corner in order to complete them at the front door (read also: "What is the floor or doors first - what is the installation sequence");
• the first row of boards is laid with a tongue and groove to the wall, and then the rest of the planks are fixed with the help of locks. Before fixing the boards, they should be coated with an adhesive mixture to improve adhesion. The maximum aesthetics and strength of the flooring can be obtained if the boards are laid in a deck way: each next row is shifted relative to the previous one, i.e. the boards are arranged asymmetrically, imitating the laying of boards on a ship's deck. See also: "Methods and types of laminate flooring from practice."

Practice shows that laying should be carried out taking into account a number of technological features:

• the planks are knocked together with softwood bars, a light hammer or mallet, which will protect the board from deformation;
• it is important to insert wedges between rows in the deck. After removing them, perfectly even seams will be observed (an analogy with the compensation gap between the wall and the first row of boards);
• when laying, a single direction must be observed and all laying lines must be parallel;
• doors are installed only upon completion of the installation of the laminate;
• the gap between the wall and the flooring is covered with a skirting board with a width of 25 millimeters or more.

Outcome

Thus, if you don’t think about the question of whether a chamfer is needed on a laminate, we can conclude that both types of coating are laid using a similar technology. If you follow the basic rules of laying and use the equipment intended for such work, then the result will be satisfactory.

Compliance with all instructions allows you to get a durable, high-strength and very beautiful coating. Any difficulties that arise will be solved by specialists from the construction company. They will also take responsibility for the acquisition of high-quality material, taking into account the main wishes of the customer.

home / Choice / What methods of laying laminate on the floor exist

What are the methods of laying laminate flooring?

During repairs, when changing the flooring, the most popular material is laminate. Due to its distinctive characteristics, it is increasingly in demand. And this is not surprising, it is easy to install, easily accessible, gives a luxurious look, fits any interior and is inexpensive. In addition, the variety of models surprises - everyone can choose what they like. The rules for laying laminate flooring do not require advanced professionalism. There are several types of laying laminate floors, but they all require certain conditions:

It is forbidden to use laminate in rooms with high humidity and sudden changes in temperature;

The floor must be dry, clean and perfectly flat;

Mandatory use of a substrate, and for a concrete base, also a polyethylene film;

Before buying a laminate, it is worth orienting yourself with the choice of laying in order to calculate the exact number of laminated boards. To determine the direction of installation, you need to make sure that the pattern and structure of the laminate are combined with the lighting of the room and their shape. Current materials allow laying flooring along the line of sunlight, across, as well as performing herringbone installation. The latter view is not available for all laminate flooring models.

Herringbone laminate flooring

For laying laminated boards in this way, a conventional laminate is not suitable.

With or without chamfer - find out which laminate is better

There must be special locks on the board, due to which laying with a herringbone or squares is possible, see the photo. In the Quick Step Noblesse laminate collection, there are small panels with a special locking device that allows you to fasten the planks at right angles.

Installation of the herringbone quick-step laminate collection is carried out along the line of natural light or against it. If you want the visual impression of a continuous plane, you need to mount along the line of light, as in the photo. If you install panels against light lines, you can visually expand a small room, but you won’t be able to hide the joints, look at the photo.

Quick step laminate can be laid not only with a herringbone, but also with squares, a deck and in many other ways, as in the photo. There are more than fifty styling options. The produced flooring is very similar to expensive parquet.

Direct Laminate Laying

If the windows are on the same wall of the room, then it is recommended to apply the direct laying of the laminate along the direction of sunlight, as in the photo, since when laying across, the panel joints will be more visible, which will spoil the whole appearance. Laying across the light is good to do when the room has a small width. With this arrangement of laminated boards, you can visually expand narrow rooms, giving volume, as in the photo.

This method is ideal for a corridor, elongated rooms. The essence of direct laying is that the panels are laid parallel to the walls, starting from the door. Cutting costs are minimal, only five to seven percent, which significantly saves money on material.

Diagonal laminate flooring

Such laying of laminated panels is considered the most time-consuming and costly, the consumption of material for trimming increases, about seventeen percent. This laying of the laminate is done at an angle of forty-five degrees, see the photo. There are two mounting methods, from the corner of the room and from the middle. Both options are used by specialists, but the second method is considered the most low-waste, it takes less boards to trim and installation is faster and easier in time.

Due to the original and neat appearance of the laid out laminate panels, a visual expansion of the area of ​​\u200b\u200bthe room is achieved, see the photo. Diagonal laying is used with an open view of the floors, when there are no carpets and numerous pieces of furniture.

Bevelled laminate

Today, beveled laminate is becoming more and more popular. This type belongs to a special series of laminated coatings. Laid out on the floor, a bevelled laminate resembles a plank floor, laid out from a powerful board with a solid canvas, as in the photo.

Such a laminate is made at an angle, performing a beveled appearance of the board throughout its thickness. The structural element is made around the entire perimeter or on two opposite sides.

There are two types of bevels:

• V-shaped recesses;
• U-shaped recesses.

When connecting two panels to each other, an almost imperceptible groove is formed, giving the impression of laying an elite parquet, as in the photo, or a solid wooden array. The recesses themselves are practically not noticeable to the touch, so you can not be afraid of the accumulation of dust in them. And the edges of the laminate are usually treated with wax, which does not allow moisture to penetrate inside. The recesses allow you to hide small flaws, smooth out irregularities with their shape, and, according to experts, will not “walk”, which is a big advantage compared to standard series.

Like all types of laminate plank, bevelled laminate is mounted on a flat plane by the standard laying method, using a substrate, as shown in the photo.

This article will help you decide which type of laminate with or without chamfer is better to choose. The first laminate floors were made without a bevelled edge and there was no sharp choice in terms of quality and reliability. What was the flooring, and this was laid. The decorative rolled edge along the perimeter on four sides, designed to make the coating more elegant, appeared much later.

Back in the 2000s as a clerk in a flooring and interior door store, I distinctly remember the absence of bevelled laminate flooring. So time flowed as usual until relatively recent times. In 2001, Unilin introduces triangular groove product.

The chamfer on the laminate is a decorative element. It is made on panels in the form of a single-strip board for complete imitation of massive parquet from solid precious wood.

The chamfer is of two types:

• V-shaped (formed due to the edges of the panels sharply beveled at 45 degrees)
• U-shaped (young type of chamfer with soft rolling, found on expensive brands of laminate and Chinese brands)

V-groove on laminate - description

The V-groove can be deep, with a beveled edge up to 3 mm and have a slight cut, less than 1 mm, inherent in some types of laminate. Visually, both options look interesting.

Floor coverings are produced with a chamfer of two or four sides. The first option involves the effect of a single board. However, I came across a 2-sided chamfer extremely rarely, and the selection of a pattern is not obvious in it. The fact is that there are collections of laminate, where the ends of the boards coincide in decor, differing only in the middle. But for the most part, the panels have about 10 types of pattern per batch and are arranged randomly in packages, requiring a certain amount of time and effort to match the texture.

List of interesting articles:

The four-sided edge on the laminate gives customers a half-hearted opinion about the method of flooring. Tiling masters, most often, when working with porcelain stoneware under a tree, lay in half a tile.

Installation of panels can take place, at the choice of the owner of the apartment, in 1/2, 1/3 and even 1/4 of the board, in addition to chaotic installation.

Laminated coating with a 4-sided chamfered edge - you need to think in advance how to lay it: random or 1/2 (1/3) the length of the floorboard. Since the flooring method in half of the board involves a greater consumption of material, the stock must be taken in excess.

Laminated parquet with a chamfer, other things being equal, is a more expensive product compared to an analogue without a bevel. The cost increases due to two extra operations in production: cutting and coloring.

• A deep chamfer edge is made in production shops on machine tool milling equipment. When milling low-cost and mid-priced laminate grades, it is sometimes possible to find chips painted over at the next stage of work at the corners of laminated panels. The laminated edge is inherent mainly in expensive brands.

• A man in one YouTube video convincingly says that the chamfer is covered with hydrophobic paint or acrylic composition in the color of the top layer. This is probably true on premium laminate brands. But after conducting fresh tests on brands: Classen and Kronospan found out that the paint on the edge darkens and peels off from rubbing with a damp cloth. Staining and varnishing on wood is known to pick up pile. The laminate of these brands was no exception. The chamfer on Klassen and Kronospan turned out to be rough to the touch.

The V-shaped cut is inherent only in laminated parquet with a thickness of 8 mm to 12 mm and even a rare 14 mm laminate. Thin panels cannot have a chamfer due to the minimum distance from the top layer to the tongue-and-groove lock and the lack of expediency to provide 6 or 7 mm cheap laminate with additional expensive options in general.

When buying laminate with a V-bevel, try to consider it yourself or ask the sellers in the store to talk about the bevel. If financial possibilities allow, it is better to purchase a laminate with a laminated V-bevel.

Pros and Cons of a V-Chamfer

The chamfer, in addition to its decorative value, has a masking effect. With existing floor irregularities, poor geometry of the slats (which manufacturers of inexpensive laminate often sin), microgaps form between the panels. The presence of a chamfered edge successfully hides them, provided that the color of the laminated boards is suitable. A suitable color ranges from light brown to dark, almost black shades.

The painted bevel can darken from abrasion, mopping. Therefore, the most successful laminate color in all respects is oak, which matches in shade with the natural, natural color of the HDF board on the basis of which it is made. On dark colors, defects are also not visible.

However, light-coloured non-V-beveled laminate floors also need to be selected with brand awareness and care. Beveled laminate emphasizes the inaccuracy of the geometry of the planks, especially in white tones.

A laminate consisting of plant fibers, like wood, undergoes contraction and expansion during humidity and temperature changes (turning on, turning off heating). Such fluctuations invariably lead to tension in the key joints and the formation of gaps.

Moisture gets into the slot gaps during wet cleaning - the lock and the edge expand, the water vapor dries up - the lock joint narrows and falls into place. There is a relatively long process of wear of the clutch geometrically accelerating with time.

The presence of facet does not directly affect this physical natural wear, but masks the defect and prolongs the life of the edge of the board. In the bevelless version, the edges of the panel begin to rise from moisture absorption. The vulnerability of the protruding edge is obvious - a quick chipping, damage to the die and wear of the edge are likely.

It is difficult to seal the seams with a bustic when assembling a floor cloth with edges. This sealant or analog is difficult to remove, it is generally difficult to do this from a chamfer.

The presence of a bevel of 45 degrees does not affect the complexity of laying a laminate. On the contrary, 5G locks become lighter in the groove, minimizing the possibility of breaking the edge.

U-shaped chamfer - description, advantages, disadvantages

The U-shaped chamfer is fairly new. The idea is to gradually round off the bevel towards the edge of the board without exposing the carrier board along the edge. The plank thus has an integral surface structure of the protective and decorative layer. The type of the manufactured board exists in a single-strip version and with imitation for artistic parquet, tiles.

With a quality product, this type of edge execution will last as long as possible. Melamine protective layer is a better hydrophobic coating than acrylic paint. Possible abrasion and deterioration of the appearance of the 45-degree beveled edge of the laminated sheet is excluded.

This type of chamfer is inherent in expensive collections of famous laminate brands: Quick-Step, Tarkett (Artizan 9 mm). Usually, the thicker the laminated plank, the more natural the pattern looks and outwardly completely imitates a roughly planed board. The decorative look of this design is now very popular and practical, as it masks all kinds of damage and scratches on the surface. It is noteworthy that the manufactured board in a matte version doubles the concealment of various defects.

Chinese manufacturers are not far behind European counterparts and produce laminate with a U-shaped chamfer. The Asian product looks great. But the workmanship is lame. The most common inaccuracies relate to the divergence of the edges of the faces in height. Mismatch of the edges leads to the exposure of the unprotected part of the plate. The result of this marriage is an early possible chipping of the edge or swelling of the plate in this place. Laminate produced in the People's Republic of China suffers from some more defects, but more on that in another article.

Laminate flooring with a U-groove can be carried out both in a chaotic way and in 1/2, 1/3 of the panel. Based on the type of installation, it is required to take a certain stock of material. The chamfer in the installation of the floor does not add any complexity or secrets.

Laminate without bevel

Bevelless execution of laminate is carried out on most products manufactured in Russia. As a rule, the absence of a chamfered edge is included in the inexpensive category of laminate floors. From this, however, it does not become less popular and is an alternative to linoleum.

Laminate without chamfer is available in the form of two-strip, three-strip and single-strip boards. Plank with two and three stripes imitates piece parquet by the size of the pattern, perfectly masking the joining line. Products, at the moment, do not correspond well to the trend and the execution is found mainly in inexpensive collections of laminate floors. The price of a laminate without a chamfer starts at approximately 120 rubles / m2.

A single-strip die is made in different price segments, corresponding to the tastes of almost any category of citizens. And if the three-lane version comes out with a simple design, without a corrugated texture, moisture protection of locks and other bells and whistles. That single-strip type of laminated boards combines all the advantages of modern flooring technologies.

Review of the master about the laminate with and without chamfer, which one is better?

Laminate without bevel:

• laminate price. Promotional products start to cost from 110-120 rubles / m2.
• Comparison of similar brands in quality with and without chamfer - cost savings of about 50-70 rubles / m2. We are considering inexpensive brands, the cost of which is about 500-600 rubles / m2.
• Possibility to perform flooring with sealing of the lock.
• In the low-end category, there is perhaps a faster wear of the top coat.
• Stamps up to 500 rubles/m2 sometimes have chips in the corners of the planks.

Laminate with V-edge:

• Moderate cost, from about 550 rubles / m2.
• Excellent gap camouflage in medium and dark tones and negligible in whites.
• A fashionable trend for products with a chamfer, an excellent imitation of an array.
• Serious difficulties in sealing the joints during installation.
• Cheap categories of laminate sin with quality and edge processing.

U-beveled laminate:

• The high cost of production, I find it difficult to answer exactly, approximately rubles from 900 per m / 2
• Cheaper options, most likely made in China, are poor in quality. There is a chance they will stumble upon, since the laminate from the Middle Kingdom is often passed off as European. It is better to take proven brands of laminate.