Examples and useful tips on the internal filling of wardrobes. Super comfortable wardrobes - how to choose? Which closet is the most comfortable

When choosing furniture, first of all, they pay attention to its appearance - materials, finishes ... What else is important? They measure the room in order to figure out whether the sofa will pass through the doorway, whether a new wardrobe or bed will fit in the room, whether there will be enough space for new furniture with the existing arrangement or something will have to be moved ... At the same time, they often forget about another point that is associated with furniture sizes.


This is ergonomics. Beautiful furniture that fits perfectly into the interior is the dream of any housewife, but imagine that it’s uncomfortable to sit at a new table: you have to bend over the countertop, and this is so bad for your spine... Or in a newly furnished kitchen, you constantly need to stand on your toes to reach for the plates at the top. And in the new closet, no matter how you arrange things, they are not at hand and not in order. A mess in the closet is a mess in life: in the morning, the preparations are delayed, and then the whole day passes in a hurry. To prevent this from happening to you, plan the size of the closet wisely.

Width


P The first and simplest parameter: the useful width of the cabinet is its entire width, except for the side and internal racks, but there is an insignificant error of 5-7 centimeters.


The width of the cabinet mainly depends on the number of doors: for 2-door cabinets, the optimal width is from 100 to 160 cm, for 3-door cabinets, from 150 to 240 cm. This is due to the fact that the door width cannot be less than 50 and more than 100 see: doors that are too narrow or too wide sooner or later begin to sag under their own weight. The optimal width is 60-80 cm. For ease of use, there are usually as many doors as there are sections. Therefore, to begin with, decide on the number of sections.


When ordering a cabinet, the width of the sections is most often adjusted to the contents: what things will be stored in the cabinet and how many there will be. At the same time, the optimal width of the section is the same 60-80 cm, maximum - 90. Very wide shelves and long rods need support in the form of partitions and rod holders, which is not always convenient.


Therefore, optimal parameters are calculated for serial wardrobes: 2 or 3 doors, width from 100 to 240 cm. Such a wardrobe is convenient and roomy: things can be placed on the shelves in two rows, and all your jackets or outerwear of the whole family can easily fit in the compartment with a rail .

Height


At Most modern wardrobes have a separate plinth (or podium). Thanks to the plinth, the cabinet can be placed close to the wall or in a corner without removing the skirting boards and without sawing the baseboards. In this case, the height of the base must be subtracted from the internal height.


The classic height of serial cabinets is 220 or 240 cm. But do not forget about the filling.


The optimal distance between the shelves: for everyday clothes, 30-35 cm is enough, for voluminous bed linen - 35-40 cm, for shelves for out-of-season outerwear, sports equipment, bags and suitcases (mezzanines), a height of 45-50 cm is needed. you must reach the topmost shelf by standing on a chair - then the upper shelves will be used, and will not remain empty and covered with dust. The same applies to the bars if they are not equipped with pantographs. The height of the rods depends on the length of the clothes: for blouses, jackets, jackets, 80-100 cm is allotted, for dresses - 150-160 cm. cm. The exact height is usually calculated by adding a margin of 20-25 cm to the length of the clothes so that the clothes do not touch the floor (if there is one bar) or another bar (if there are two of them in the section, one above the other). Drawers are placed no higher than 120 cm from the floor, so that it is convenient to pull them out.


When choosing the height of the filling elements, focus more on your height, because average numbers are used in the calculation of the wardrobe parameters.

Depth


With Serial cabinets are designed with a classic depth of 60 cm or with a reduced depth of 45 cm. They have an important difference - the location of the rods. If the depth is standard, the bars are parallel to the back wall. If the reduced one is perpendicular, things on such rods hang "face" to the doors, and this must be taken into account when planning the width of the section.


Convenient shelf depth - 60 cm. Built-in wardrobes can have a maximum of 70 cm. To make the cabinet convenient to use, you must reach the back wall - then things in the second row are easy to take and put in place.


Even when designing a cabinet, it is worth remembering that the sliding mechanism of compartment doors takes up to 10 cm of depth and the useful depth of the cabinet is reduced by exactly the same amount.


Therefore, the optimal depth of a functional and spacious closet is 60 cm. Sliding wardrobes with a depth of 45 cm are suitable for a small hallway or a narrow corridor.


Popular wardrobes

Call to a member function getField() on null (0) /var/www/site.test/www/bitrix/templates/.default/components/bitrix/catalog.section/shelves_in_section/template..test/www/bitrix/ modules/main/classes/general/component_template..test/www/bitrix/modules/main/classes/general/component_template..test/www/bitrix/modules/main/classes/general/component..test/www/bitrix /modules/main/classes/general/component..test/www/bitrix/modules/iblock/lib/component/base..test/www/bitrix/modules/iblock/lib/component/elementlist..test/www/ bitrix/modules/iblock/lib/component/base..test/www/bitrix/components/bitrix/catalog.section/class..test/www/bitrix/modules/iblock/lib/component/base..test/www /bitrix/modules/iblock/lib/component/base..test/www/bitrix/modules/main/classes/general/component..test/www/bitrix/modules/main/classes/general/main..test/ www/bitrix/templates/.default/components/bitrix/news.detail/advices/catalog..test/www/bitrix/templates/.default/components/bitrix/news.detail/advices/template..test/w ww/bitrix/modules/main/classes/general/component_template..test/www/bitrix/modules/main/classes/general/component_template..test/www/bitrix/modules/main/classes/general/component..test /www/bitrix/modules/main/classes/general/component..test/www/bitrix/components/bitrix/news.detail/component..test/www/bitrix/modules/main/classes/general/component.. test/www/bitrix/modules/main/classes/general/component..test/www/bitrix/modules/main/classes/general/main..test/www/bitrix/templates/.default/components/bitrix/news /advices/detail..test/www/bitrix/modules/main/classes/general/component_template..test/www/bitrix/modules/main/classes/general/component_template..test/www/bitrix/modules/main/ classes/general/component..test/www/bitrix/modules/main/classes/general/component..test/www/bitrix/components/bitrix/news/component..test/www/bitrix/modules/main/classes /general/component..test/www/bitrix/modules/main/classes/general/component..test/www/bitrix/modules/main/classes/general/main..test/www/advice s/index..test/www/bitrix/modules/main/include/urlrewrite..test/www/bitrix/urlrewrite.php:2

When buying or ordering furniture, everyone knows how difficult it is to choose from a large number of proposals. A simple question turns into a problem if the furniture is made to order. For example, when we choose a closet - the most beloved and frequently used piece of furniture in the house.

Responsibility for the layout and, the choice of material, filling for wardrobes falls on your shoulders. Often this becomes a global problem. What should be the right, albeit not ideal, wardrobe inside?

There are no established standards for the interior filling of furniture. It all depends on several components:

  • The size of the niche or wall for embedding;
  • Quantity and type of clothing;
  • The finances available to the client.

The simplest layout of the "insides" can be compiled on the Internet on the websites of some furniture manufacturers. It also indicates, based on the given cabinet dimensions: length, width, height, number of shelves, as well as the fittings used, and then the price for the design of the design, taking into account installation and materials, is immediately displayed.

Sliding wardrobe, the internal content of which with options for placing shelves, drawers, doors, mirrors and other equally important elements can be seen even before it will stand in the apartment - this is the so-called "pen test", designed for a preliminary assessment of the customer's financial costs . This is a good help when spending.

For a small room or hallway, a one-door or two-door wardrobe is suitable. The number of sections in this version is at least two. Dividing the wardrobe at the design stage into conditional storage areas for long items and shoes, hats, sections for gloves and clothing care products will simplify the manufacture of internal elements and compartments.

As a rule, cabinets with one door on a slider are small and require an internal orderly placement of clothes and neatness of the owner, since one of the halves of the cabinet section will be constantly open.

The width of the sections for storing outerwear should be at least 80 cm, for long things (coats, raincoats, fur coats), the height is minimum - 140 cm, maximum - as far as height and convenience of hanging hangers on the crossbar allow.

When planning the internal filling of the wardrobe, you can look at the photo below:

The location of the crossbar (bar for hangers) along or across also depends on the preference of the customer and the number of things. It is more practical to place the crossbar along the width of the section, and not in depth. This will save significant space inside the wardrobe.

Practical sliding wardrobe inside: features

For two-door and filling options, much more than for a single-door.

Such furniture is convenient in the bedroom and in the dressing room. Storage items may include:

  • bed dress,
  • seasonal clothing,
  • tablecloths,
  • towels,
  • magazines
  • and even built-in sections for jewelry and cosmetics.

To store bed linen, it is best to use horizontal shelves. They allow you to fold the laundry into one or two piles in width, depending on the preferences of the hostess. The width of the shelves varies from the standard 40 cm to the maximum possible size in the selected design.

Practical filling of sliding wardrobes

The photo shows several options where not only space is saved, but also much more usable area inside is involved.

The arrangement of things in this type of furniture obeys a certain sequence:

  • Above- the most unnecessary or least used (hats, bags).
  • Middle (at eye level)- the most wearable items, frequently used (dresses, shirts, trousers, underwear).
  • Bottom can store heavy but oversized items such as shoes, travel bags, etc.

Another important feature is its supporting structure, its foundation. For wide elements, the manufacturer uses additional reinforcing elements. They lead to a slight increase in the cost of structures, but make it stronger and more reliable.

Such a solution is relevant for a large number of hanging clothes (coats, fur coats, jackets) on long rails. If the project deviates from the standard compartment width of 120 cm, manufacturers offer a perpendicular support inside to insure kinks and deflections of pipes used as crossbars.

Which cabinetry to choose?

A variety of wardrobes (photos of filling the corner and straight cabinets are shown below) use space in different ways and take up space in the house also in different ways.

Corner - allows you to occupy a non-standard area in one of the triangular zones of the room. It can be a corner that no other furniture fits into. The beautiful facade of the closet will allow you to embellish such an “uncomfortable” space.

The corner wardrobe is a mini dressing room, twice as many things fit on the occupied area as in the direct version.

Finances play a big role in filling the closet. Internal elements are made from:

  • metal frame - in this case, shelves and drawers can be rehung and rearranged in different ways during the operation of the cabinet,
  • panel - most often made of chipboard, where rehanging options are no longer foreseen.

The metal frame is more expensive, and the panels are cheaper. The peculiarity of the metal frame is the continuity of only its own accessories (handles, hooks, holders, pantographs, crossbars, boxes, etc.).

For panel structures, everything is much simpler. The manufacturer's website usually presents various models of such elements. Almost any accessories are suitable for them, so the panel wardrobe and its filling options with additional elements inside are much more interesting.

Built-in content elements - a necessity or a luxury?

To store men's belts and ties, special retractable holders or shelves with cells are used as an internal filling of the cabinet, which are mounted on the sidewalls and are very convenient to use.

Shoe boxes (nets) are practical, but they should not be located close to the floor (dirt accumulates under them and is inconvenient to clean). The width of the mesh can vary from 30 cm (for a pair of shoes) to 100 cm or more.

There are a few tricks to make any wardrobe even more practical.

Pantographs- useful insides of the sliding wardrobe, which are placed in the closet in the sub-ceiling part of the structure. They are designed for high panels and provide easier access to things located in the upper compartments of the closet with hanging trousers, blouses, skirts, shirts.

You can divide one of the narrow sections of the designed structure (width from 30 cm, height at least 140 cm) into 2 parts: 100 cm - for hanging things (usually men's shirts take up just that much space in length), and use the remaining centimeters as narrow shelves (for shoe boxes, or any little things that can be stacked on shelves).

In any case, it must be remembered that the closet is designed for more than one year and options for its “growth” are possible. Therefore, the design of the interior space should take into account the perspective and maximum content, as well as the features of the house or office in which it is operated.

Wardrobes. Photo gallery of internal content

The photo shows a small selection of options for internal shelves of sliding wardrobes. Depending on your needs, you can find the option that suits you and order the execution from the masters or make a cabinet with your own hands.

Photo inside the corner wardrobe:







Photo inside straight wardrobe:







In the hallway you need a closet or hanger for storing clothes. An ordinary closet is inconvenient due to swing doors that block the passage, and a hanger with a bunch of clothes does not look as aesthetically pleasing as we would like. Therefore, in recent years, more and more often they put a closet in the hallway. This type of furniture allows you to rationally use the entire usable volume - due to shelves, baskets, hangers, etc.

Construction types

Sliding wardrobes are of three types. Built-in ones differ in that they occupy some kind of niche and do not have their own walls, floor and ceiling. A similar design is also made when it is possible to fence off part of the room from wall to wall. In this case, they simply order a facade (doors) for a sliding wardrobe with a system of rollers and guides. Partitions are placed inside and the filling is fixed / installed. In some hallways, a built-in closet is made on the site of the former pantry, with a different layout, it is possible to fence off a part at the end.

If this is not possible, put a sliding wardrobe. This is a full-fledged large wardrobe with a back wall. sides, floor and ceiling. It differs in the design of doors and filling. Another difference is that they try to make this type of storage systems right up to the ceiling in order to make the most of all the space. Yes, and it looks more organic.

Decoration and design ideas

First, let's talk about what wardrobes are made of. The whole structure can be divided into a body and a facade (doors). The body is made of laminated chipboard or. The option with chipboard is cheaper, but the structures are only straight-lined - this material does not bend and its manufacturing technology does not allow to obtain curved surfaces. MDF is a more environmentally friendly and expensive material. Here you can form rounded edges from it.

Facades or doors for sliding wardrobes are made of different materials, framed in a profile frame. Use:

  • Laminated chipboard and MDF. The laminating film can repeat the texture of wood, leather, be monochromatic matte or glossy, with a geometric or floral pattern.

    The texture can be anything - up to imitation of crocodile skin

  • Glass. Transparent glass is almost never used, but colored or frosted glass can be found.

  • Mirror. A very common material. Drawings are applied to the surface using sandblasting technology. They can cover the mirror almost completely, leaving small fragments of the intact mirror, or they can be applied only in fragments.

  • Separately, it is worth mentioning photography. This technology allows you to transfer any image to film. This film is then glued to the facade.

But most often you can find combined facades. Various combinations of the materials listed above give just an incredible number of design options. You can develop a design for any interior and taste. Some examples are in the photo below.

Read how to make sliding doors for a wardrobe yourself.

Horizontal division is a widely used technique

Three textures at once - fiberboard, mirror and sandblasted pattern

Sliding wardrobe with lighting - convenient

Floral ornament is one of the common themes

Imitation of a wooden surface, but an unusual combination with a different direction of the "fibers"

Simple and tasteful - frosted glass with horizontal divisions

Using even the space above the doors is a good idea for a small hallway.

Sliding wardrobe - excellent modern system for storage. In addition, it perfectly decorates the interior. We will talk about the types of wardrobes, their features and application in the living room, bedroom, nursery and hallway. Consider a photo of 100 ideas for wardrobes in the bedroom and hallway.

Types of wardrobes

Diagonal corner

These designs are also designed for, but they, unlike the corner cabinet, occupy the entire corner completely, as if cutting it off.

Such a wardrobe is the most spacious, and it looks stylish on the outside. It will include not only a wardrobe, but also pillows, blankets, bed linen, etc. This is one of the best ways to get a great closet and use the least amount of space.

There are several popular materials for cabinet furniture, including cabinets.

Sliding wardrobes from a chipboard

Chipboard is a chipboard. It is made from shavings, which are connected with formaldehyde resins. It is one of the most common furniture materials. It is inexpensive, durable and well maintained for many years.

Chipboard cabinets are sold ready-made and made to order. Now new technologies for working with this material are being used. Chipboard is covered with a laminated film of different colors. Thus, the surface can be of any color and imitate the texture of natural wood. Today, it is chipboard that is used for the manufacture of wardrobes.

The disadvantage of the material is that it cannot be finely processed. There are no beautiful, elegant details on furniture made of chipboard. These are simple and conservative models, but they are worthy of attention due to their affordable price and good quality.

Sliding wardrobes from MDF

MDF also consists of chips, only even smaller than chipboard. They are connected using paraffin and lignite. This is a more environmentally friendly material compared to chipboard. It is soft and pliable in work, it is for this reason that modern masters began to use it so often. Almost any creative idea can be realized with MDF. All original, stylish samples are made of MDF. It can be matte, glossy, any shape and color.

Sliding wardrobes made of natural wood

This is the most expensive and reliable material. It is quite logical to choose such a cabinet if all the furniture is made of natural materials.

Such a cabinet is certainly the most environmentally friendly and durable. If you prefer traditions and are going to leave the closet to your grandchildren, then this option is for you.

Advantages of the wardrobe

When you install a wardrobe, you immediately solve several problems:

  1. The room is freed from unnecessary chests of drawers, shelving and bedside tables.
  2. There is more order, because all things are in one place, they are conveniently laid out and hung.
  3. Less often you need to carry out wet cleaning, because there are fewer open surfaces.

In addition, the sliding wardrobe makes the environment elegant, concise and stylish in a modern way.

In the living room

The most beautiful part of the wardrobe facade is the doors. When we put a closet in, we want it to become a key part of the interior. To do this, you can make doors from frosted or corrugated glass, decorate it with stained-glass windows or spectacular photo images. In this case, the wardrobe will be not only a place for storage, but the brightest element of the interior.

Another important feature of the wardrobe for the living room is its internal content. There may be a built-in bar, a mini-fridge, a department for stereo equipment, book shelves, document drawers and a safe. And all this will be securely hidden from dust and prying eyes.

This is ideal for those who love compactness and hate to fill the room with bedside tables, chests of drawers and cabinets.

In the bedroom

The interior of the bedroom is designed to be soothing, gentle and harmonious. But this does not mean that the closet should not attract attention. Door glass can be sandblasted or covered with artificial leather, rattan or bamboo. They can be plain glossy or matte and repeat the main color scheme of the bedroom design.

But behind the spectacular facade, there should be convenient drawers, shelves where it will be possible to “hide” not only all clothes and shoes, but also an iron, ironing board, bed linen and spare pillows and blankets.

In the nursery

If the child has a separate room, then he is supposed to have an excellent spacious wardrobe that will not need to be changed in a few years when the child grows up. But shelves and drawers should be low so that the baby himself can get his things. In addition to clothes, you can store toys and books there. Therefore, the nursery will be more spacious and tidy, because everything will be in one place. Of course, it is desirable to choose a sliding wardrobe for a pleasant beautiful color, with drawings or interesting stained-glass windows.

Choose furniture for the nursery only from high-quality materials without an unpleasant smell!

In the hall

If the area of ​​\u200b\u200bthe hallway allows, it is simply necessary to put a closet there. In a spacious hallway, you can install such a spacious closet that you can put most of the things of all family members there, which means that in other rooms the closet will either not be needed at all, or it will be small.

Elite wardrobes

First of all, elite wardrobes are made only from natural wood: oak, ash, pine, birch. The second distinguishing feature will be an unusual design made of modern materials, reliable fittings and thoughtfulness of the internal content. Elite models can be ready-made or made to order. However, even ready-made cabinets are made taking into account all the nuances of use. You can choose a wardrobe with any configuration, for the bedroom, living room, nursery and hallway. Depending on the size, they can be two-, three-, four- or five-door.

Such cabinets are modular, that is, some of the elements can be removed or swapped as desired.

How to choose a quality wardrobe

As we have said, the closet is made of chipboard, MDF and wood. These are all proven materials with their own characteristics. We choose them based on cost, appearance and our own preferences. Wood is a classic. If you want an exclusive, choose MDF, there are more opportunities for experimentation.

As for design delights, you need to rely on well-known, proven factories, because the quality of drawings and other design should not suffer during operation. A good photo facade, stained glass, sandblasted drawing cannot be cheap.

There is no money for an exclusive, you can do without it. It is important that the cabinet itself is made with high quality and is comfortable. See what's inside him. Will you be comfortable using it? Will what you want to put in go in there? Is it possible to add shelves or drawers to the wardrobe?

A closet is usually used for decades, so every detail needs to be thought through. It should have several drawers, shelves and hangers for clothes, compartments for shoes, etc. The filling depends on where you are going to put the closet: in the hallway, bedroom or living room.

Sliding wardrobes to order

Finding the perfect closet in every sense is possible, but difficult. How much time it will take is not clear. If you need to buy a small compartment in the hallway of a rented apartment, then everything is simple. You go to the nearest store and buy. Why puzzle? But if you bought or built your own home, spent a lot of money on repairs, thought through every detail of the interior, then naturally you want everything else to be perfect as well. In this case, we will be helped by the manufacture of furniture to order.

The price of sliding wardrobes to order

Yes, custom-made furniture is expensive. After all, you will be offered several design options to choose from, they will make a unique cabinet for your non-standard sizes, take into account all your wishes, make additional shelves or drawers. And individual work costs money. And the more wishes, the higher the final cost.

Often we are forced to order a wardrobe, not because there are many wishes, but simply because it is impossible to choose a finished model for the required parameters, and there is not much money. You can save on a mirror, glass and other delights. They make up the bulk of the cost of the product. But there is no need to try to save on fittings and the number of shelves and drawers, because this cabinet will have to be used for a long time. However, the advantage of an individual order is that you can then call the master, and he will complement or remake the interior of the cabinet.

As a result, the price of the cabinet will depend on its size, material, fittings and fullness. Built-in will be cheaper than a stand-alone coupe.

Dimensions of wardrobes

Cabinets are different. You can find a small closet in the hallway, a compact corner model in the nursery or a huge, full-wall wardrobe for the living room. There are many different options for sale. Cabinet (freestanding) can be much lower than the ceiling or almost reach it.

Before you go to the store, you need to consider the installation location and take careful measurements. We must not forget from the front door: whether the cabinet will interfere with opening and closing.

Consider the location of switches, sockets, the width of the window sill and the battery.

Measure the width and length of other furniture. Will there be room for her if you put this closet in the room?

It is better to make an approximate drawing of the room with all measurements and furniture arrangement.

When ordering a closet, everything is much simpler, because the measurer will definitely go to the place.

DIY installation

If a person loves and knows how to work with his hands, then the independent production of a wardrobe will be within his power. Hardware stores sell all the necessary parts: chipboard and MDF panels of any size, doors with wheels and rails on which they will ride.

Before buying, you need to draw a sketch of the future wardrobe with all measurements. You need to take into account the width of the walls and doors. Knowing the dimensions, you can go to the store and buy everything you need.

In the built-in cabinet, the side walls are attached directly to the wall, another wall is necessarily installed between them. Then panels with grooves and a rail for the door are drilled to the floor and ceiling. After that, the doors are installed.

Delivery and collection prices

In almost any store, the cost of delivery depends on the distance and on the purchase price. The sliding wardrobe is quite expensive, so delivery within the same city can be free. But if there is no freight elevator, then you will have to pay an average of 20-30 rubles for lifting to each floor. for each floor. Some stores also charge money for lifting bulky furniture in the elevator.

Cabinet assembly is always paid separately. The price of the service is from 5 to 10% of the cost of furniture. But if you have time and desire, you can assemble the cabinet yourself. If there are no certain skills, and your closet has a lot of drawers, shelves, etc., then it is better to entrust this work to a specialist. This will keep you in a good mood and the joy of shopping.

When purchasing or ordering furniture designs, it is quite difficult to make a choice from a large number of offers, especially for such a moment as filling wardrobes(photos with sizes offer numerous options), among which you need to make a competent choice. A banal question can turn into a problem, especially in the process of making furniture to order, so you need to know the basics of selecting cabinet furniture for each of the rooms or large apartments.

Correct filling: nuances

There are no specific standards for the selection and production of fillings. However, the advice of experts in the field will not be inappropriate, on the contrary, it will help to quickly make a determination with the choice of design. The choice depends on certain factors that must be taken into account in this case.

  • dimensional parameters of the wall;
  • purpose of structures;
  • number of personal belongings;
  • cabinet customer's budget.

The simplest and most common types of planning can be found on the Internet. There you can also measure the parameters of length and width, as well as find out the price for the manufacture of structures, types of materials and shapes of products. The wardrobe, or rather the planning of its “insides”, involves not only the placement of shelves, but also the design,, and other elements, so it is important to evaluate the design of the product in advance, even before a new piece of furniture appears.

Number of doors in the cabinet

There are several options. For example, for a small room, a closet with two doors or with one door will be an actual option. It turns out that this option involves at least two sections. At the moment of designing the structure, the cabinet is divided into conditional niches.

  • Elements for the purpose of storing long things,
  • Niches for the safety of clothes used every day (jeans, sweaters, T-shirts, tops),
  • Compartments for storing linen accessories and accessories,
  • Products for gloves, belts, ties and other accessories,
  • Drawers and shelves for clothing care products.

An important role is played by the number of doors, compartments. with one door, equipped with a guiding particle, are small in size, but have good internal order. The peculiarity lies in the constantly open state of one of the halves of such a product. This will create a niche for storing other devices in an open area.

Construction width

  • Outerwear sections - 80 cm,
  • for long things - 140 cm.

It is important to know! It is most convenient to choose the location of the crossbar based on the width, thanks to this approach you can save a lot of free space inside.

  • The filling of the product should be located at a convenient height so that the owner can easily get inside. The size of the opening in this case should be about 35-40 cm.
  • If you need to choose dimensions for short clothes, the opening on the hangers is 80 cm, for long clothes - 150 cm. The opening of the bar is calculated by adding 20 cm to the value.
  • The mezzanine in the closet is traditionally used to store large items that are not currently used by the owners.
  • Socks and items of underwear are recommended to be stored in corner wardrobes. Some models have triangular shapes, and there are also trapezoidal and diagonal models. If you decide to make the product corner, it will be more difficult to fill it, because you will need to take care of providing convenient access to things located in the corner. If you want to rationally use the space, you can install several hanger rods in the very center. In the corners, open-type shelves are traditionally made to place souvenirs. Filling corner wardrobes, photos with dimensions suggest a large number of options, is a complex process, however, with due attention, good results can be achieved.

    Filling wardrobes for built-in wardrobes

    If you decide to take on the assembly of a built-in structure, you can choose relevant and practical solutions, especially if you learn how to use free space as competently and practically as possible - from and to. It is important to ensure that empty niches are correctly filled. In the bedroom, if such designs are used, many people strive to create a place for or a TV. Another thoughtful option is to create an open module. Some owners of apartments and houses are adamant in their decision to create a practical design, so they use truly practical solutions when creating.

    findings

    Thus, when planning the filling of structures, you should be aware of the fact that the lion's share of your comfort and convenience, as well as the rationality of the space in the room, will depend on this. The place where the cabinet is installed acts as a basic planning element. For

Fitting © 2022 Design and interior of apartments