Watch how to rinse a garden hose. Do-it-yourself washing machine hose cleaning. What needs to be done to prevent the problem from reoccurring

Sometimes large debris gets into the washing machine during the washing process. This can lead to internal contamination or cause more significant problems. This article will tell you how to clean the drain hose in the washing machine.

Disconnecting the hose

For different models and types of washing equipment, the drain hose is disconnected in different ways. You will need to get the drain hose in different ways, since washing machines have housing design features and different ways of fixing the drain pump.

However, the first step is to do the following:

1. Disconnect washing appliances from the power supply;
2. Close the tap through which water enters, then drain the remaining stagnant water through the drain filter hole;
3. Pull the hose itself out of the sewer pipe.

When the tools for disassembly are ready, you can begin to disassemble the washer.

In such machines as Whirpool, LG, Candy, Beko, Samsung, Ariston, Indesit, Ardo, it is possible to get the hose only through the bottom of the washer.

It is done like this:

1. First you need to dismantle the bottom panel using a flat screwdriver;
2. Then you need bolts that will hold the filter;
3. Next, for more convenient work, you need to put the washer on its side. First you need to put something under the typewriter;
4. Use a tool to loosen the hose clamp. Then remove it from the pump connection;
5. Disconnect it from the fasteners on the body of the machine.

It should be noted that there are washers that do not contain a bottom or have a special removable tray.

In Electrolux, Zanussi machines, to clean the hose, you will need to dismantle the back cover of the washer.

It is done like this:

1. First you need to detach the hose, freeing it from the latches that hold it;
2. Disconnect the hose supplying water from the valve;
3. Unscrew the top panel of the machine, which is held on by bolts, which is on the back wall;
4. Disconnect the top panel (cover) of the machine;
5. Remove the back wall by first unscrewing the screws located at the edges;
6. Loosen and remove the hose clamp.

In washing appliances of the brands AEG, Bosch, Siemens, you will have to get the hose through the front side of the case.

You need to do it like this:

• From the front of the body of the machine, you need to dismantle the clamp, as well as the sealing gum;
• Remove the tray for loading washing powder;
• Dismantle the lower bar of the machine body;
• Unscrew the bolts located at the bottom of the panel;
• Dismantle the door lock;
• Remove the front panel of the washing machine;
• Loosen the clamp that holds the hose;
• Remove it.

The above methods are only suitable for those machines that have front loading. In those machines that are loaded through the top hatch, the hose is removed differently.

First, the fixing bolts of the side wall are unscrewed, then the side panel itself is removed. Next, loosen the clamp on the hose. The last step is to remove the hose itself.

How to clean the drain hose?

After disconnecting the hose, it must be visually inspected and cleaned. To properly clean the hose, a thin Kevlar cable is needed. Using a small brush at the end of the cable, you need to clean the plaque inside the hose.

Hose cleaning is carried out as follows:

1. First you need to insert the cable inside the hose. And first on one side, and then on the other;
2. Perform the above procedure as many times as necessary for high-quality cleaning;
3. Rinse the hose under a strong stream of water;
4. Fix the hose in the old place;
5. Assemble the machine in reverse order.

Prevention measures

Usually, a clogged washer hose occurs on its own. Small objects cannot get into it, as they will get stuck in the pump or drain filter.

Sooner or later, almost everyone is faced with the question of how to clean the drain hose in the washing machine. Despite the apparent simplicity (you just need to disconnect it from the machine itself and rinse it), this can not always be done right away, since you need to clearly understand where it is connected and how to safely remove it and connect it back. In different washing machines, the connection points may, although slightly, differ.

The main causes of clogging

It may be necessary to clean the drain hose due to two types of blockages:

• mechanical;
• natural;

Mechanical blockage of the drain hose occurs due to the ingress of small objects into it. Among them:

• coins;
• decorations;
• small parts of toys or toys themselves;
• toothpicks;
• change from pockets;
• details of clothing, including decorative ones;
• other small items.

Natural clogging is possible due to the smallest particles of hair, wool, fluff, cotton wool or lint getting into the hose, sometimes indistinguishable to the eye and gradually accumulating together.

It should be noted that clogging of the natural type occurs much more slowly than the mechanical one, but because of this, you should not be less afraid of it.

The fact that it is time to clean the hose becomes clear from several nuances:

• Drainage of water occurs with great difficulty or is completely impossible.
• The washing machine is completely blocked.
• Unable to turn on Rinse mode.
• The Spin mode also does not function or works intermittently.

Also, the blockage can be complete or partial.

What you need

For this work, you will need several tools, among them:

• screwdrivers of different sizes, since the bolts and fasteners on different tools differ from each other;
• pliers;
• a Kevlar cable with a small brush attached to it.

You also need to prepare a shower or sink - anything where there is running water.

Drain Hose Cleaning Instructions

The drain hose is disconnected with its own characteristics depending on the washing machine.

For example, when working with equipment from LG, Samsung, Indesit, you need to get to the pump through the bottom:

1. Remove the bottom (or bottom panel).
2. Remove filter elements.
3. We unclench the clamp and disconnect the pump of the drainage system.
4. Disconnect the hose.

For Electrolux and Zanussi machines, the process is different:

1. We unfasten the hose by opening the special latches.
2. We unscrew the hose from the water supply system (valve).
3. Remove the top and back covers.
4. Unclench the clamp on the drainage system, disconnect it.

With "washers" brands Beko and Siemens perform the following steps:

1. Remove the clamp and seal from the front of the case.
2. We remove the container where the cleaning (detergent) is poured.
3. Remove the bottom panel.
4. We unscrew the bolts to remove the sunroof blocking system.
5. Detach the front cover.
6. Loosen the drain hose clamp and pull it out.

If the machine is not with a vertical way of loading laundry, as in the examples given, but with a horizontal one, then:

1. Remove the side panel.
2. Loosen the clamp on the drain hose and disconnect it.

The hose itself is cleaned as follows:

• We insert the cable into the hose alternately in both directions. You need to do this several times.
• Wash the hose with running water.

After the end of the procedure, the hose is connected back to the unit, and it is assembled in the same order as it was disassembled.

Video: disassembling a technical device and cleaning the drain hose of one of the indicated models.

Take good care of your washing machine. The cause of the breakdown may not only be a blockage in the drain hose. Regularly descale it, use proven products and carefully operate the equipment, and then it will serve you for many years. Also, for prevention, try to clean the hose in order to anticipate the problem in advance. A serious blockage can send your car in for repairs and is best avoided.

An important component of the culture of hookah smoking is the proper care of your smoking accessories. If you do not properly clean the hookah, then it will become clogged after a short period of time, and it will be unpleasant and difficult to smoke it. If during smoking you will feel extraneous smells and tastes, then this is the main signal that the hookah must be thoroughly cleaned. It is best to clean the hookah immediately after each use. It is in this case that the resins in the hookah will not have time to dry, and you will be able to clean them with the highest quality.

Cleaning a hookah is an extremely simple process. However, it won't take much of your time. However, this process must be taken very seriously, because careless cleaning can damage the hookah and render some of its components unusable. You need to clean each element of the hookah separately, but the most attention should be paid to the hose, because it is there that the largest amount of foreign matter accumulates. Therefore, consider the basic principles of how to wash a hookah hose. It doesn't matter if this hose is silicone, wood, or leather - it still needs to be rinsed well.

First of all, the hose must be disconnected from the hookah. In order to completely get rid of odors and foreign matter, it is necessary to rinse the hose thoroughly in a concentrated solution of citric acid. After that, you need to take a separate mouthpiece, attach it to a tap with water and rinse it, constantly increasing the pressure of cold water. Such washing should be carried out for at least fifteen minutes. After that, we blow the hose well from both sides. To improve the cleaning effect, we use a fishing line. The length of the fishing line should be three lengths of the hose. We attach a rag in the middle of the fishing line, and stretch it through the hose in two directions alternately. If the cloth is dirty, it must be replaced with a new one. Dry the hose at the end of cleaning. It should be in a vertical position so that all the water can drain from it.

If standard hoses are used, they cannot be washed. They contain a metal that can rust when in contact with water, making it more likely to inhale rust dust. In case of contamination of such hoses, the only way out is to replace them. Sometimes ordinary blowing helps, however, the effectiveness of such cleaning is small.

You can learn more about the rules for cleaning the hose when watching the video:

According to statistics, blockage is the most common problem for any SMA. If such a malfunction happens often, then it is inconvenient to call the master to the house every time, and even more so - to transport the washer to the service. You can figure out on your own what to do if the hose in the washing machine is clogged.

It is a mistake to assume that to eliminate blockage in the hose, it is enough just to rinse it. First you need to understand where it is and how to remove it correctly so as not to damage it. But nevertheless, eliminating the blockage is an easy task, and about all its stages - below.

Washer blockage: what is it

Consider some of the reasons why a blockage in the drain may occur:

Disconnecting the hose

Before proceeding with the removal of the hose, first unplug the washer's power cord from the outlet, close the valve to block the water supply. After that, be sure to drain the remaining water through the drain filter.

If you purchased a Samsung, LZh, Ariston, Whirlpool, Indesit, Kandy, Ardo or Beko model, then you will have to perform all the steps through the bottom after removing the bottom panel:

Important! If your model has a drip tray, remove it to access the parts.

If you have a Zanussi or Electrolux washing machine, then you need to remove the back cover and follow these steps:

These actions helped us come to the main question - how to clean the drain in the washing machine.

Hose cleaning

After removing the element, inspect it and make sure that it is not damaged anywhere. You will need a thin cable with a small brush on the end - it cleans soap deposits perfectly. For a gentle and effective cleaning, we suggest you use the following tips:

1. Make progressive movements with the cable, returning it back from time to time. The process is similar to cleaning a sewer pipe from a blockage.
2. Rinse the drain hose for the washing machine under running water.
3. Set in place.
4. Assemble the washer with all the parts in place.

To consolidate the result, pour 100 g of citric acid into the powder receiver, set the temperature to 60 degrees and turn on the “idle” mode.

Prevention

There are natural and mechanical types of blockage. They lead to the need for self-cleaning of the drain hose.

A natural blockage occurs if debris has accumulated in the drain system: hair, pile, thread, animal hair. All these particles enter the washer from the clothes during the washing process.

Important! Natural blockage occurs in the machine less often than mechanical.

Mechanical blockage is possible if small objects enter the washer's filtration system, this leads to mechanical blockage. Instead of thinking about how to clean the drain hose in the washing machine, carefully check the pockets before washing.

At each wash, take serious measures:

• Remove any little things from your pockets. If there is no time to sew on buttons that are hanging by a thread, seal them with sewing tape.
• Wash clothes in a special laundry bag.
• Use washing powders marked "Automatic".
• Try to clean the washer from scale, mold and limescale at least once every six months.
• Use water softeners.

Now you know how to clean the drain system and how to disconnect the hose - follow our recommendations and do not forget about prevention.

(function(w, d, n, s, t) ( w[n] = w[n] || ; w[n].push(function() ( Ya.Context.AdvManager.render(( blockId: "R-A -219849-29", renderTo: "yandex_rtb_R-A-219849-29", async: true )); )); t = d.getElementsByTagName("script"); s = d.createElement("script"); s .type = "text/javascript"; s.src = "//an.yandex.ru/system/context.js"; s.async = true; t.parentNode.insertBefore(s, t); ))(this , this.document, "yandexContextAsyncCallbacks");

Gradually, tobacco residues accumulate on the walls of the hookah and soot. Fragrant the smoke is filled with strangers smells. smack bitterness prevents the lover from enjoying the chosen tobacco variety. In such a situation, a hookah lover thinks about how to clean the hookah hose.

Flushing Rules

Pay special attention to the cleaner means. Forget about modern powders, which are then difficult to completely remove from surfaces. Remains detergents do not have the best effect on the taste of smoke. Even repeated washing with water will not help get rid of the smallest particles of powder.

The best option for washing a hookah is a solution of baking soda. For raise
effectiveness, you can add a small amount of citric acid to it. But in this case, you need to be careful.

Models of hookahs with plastic hoses are best tolerated by water. They not only tolerate the cleaning operation well, but also serve for a long time. Silicone hookah hose also works well in this situation.

Please note that the rinse water must be hot. Otherwise, the soot will not soften. Chemical cleaners and special agents must not be used. After each use of the hookah, you need to carefully blow out the hose. The smoke should completely come out of it.

Close one end of the hose with your thumb. Pour soda solution into it.
Now close the other end with your finger. The liquid in the hose will flow from one end to the other during the lifting and lowering process. After 2 minutes, pour the solution out into the sink. Depending on the degree of contamination, several such procedures may be necessary.

How to clean leather hoses

The skin does not tolerate prolonged exposure to water. The product swells up quickly. It is deformed. Only dry cleaning is suitable for leather.

Cleaning method with a brush

Prepare a thin brush in advance. In the absence of a brush, you can take advantage strong fishing line with soft rags.

Parsing hookah and proceed to cleaning the hose. To do this, prepare a brush and soda solution. Be sure to consider the type of material from which they are made. Metal hoses must not be washed with water as they will rust. They must be dry cleaned. Carefully pass the brush inside the hose.

Silicone hose for hookah tolerates such a procedure well. Be careful when using wire. To it is enough to make one sharp movement to damage the hose . If possible, use the profile adaptation. Wrap a soft cloth around the wire. Making progressive movements , clean it . In case of severe pollution, you will have to change rags several times. Take care of this in advance. The procedure is completed by blowing.