Installation of a bosch therm 4000 o gas column. Geyser Bosch: an overview of models and prices. Geysers Bosch Multi-level security system

It is difficult to find a more famous German brand on the home appliance market than Bosch. Under this logo, a successful German corporation distributes consumer electronics and appliances -, and, boilers, etc. Our review will be devoted to the Bosch geyser.

The guide is based on instructions (manuals), user reviews, expert opinions. You will learn about common equipment failures: when you buy a Bosch water heater, you will be fully equipped.

Rulers and their features

Unlike the products of the main competitor of the German corporation - "Electrolux", the model range of Bosch Group is diverse. Various modifications and form factors are available to buyers; the equipment can be kindled according to any of the types of ignition that exist today, it has different thermal power, productivity (in liters), design and body dimensions.

All models are assembled in Portugal, except for the inexpensive "Therm 2000 O", traditionally assembled in China. Let us consider further each series and some models included in it separately.

Therm 2000O

Inexpensive version with modest performance, delivering 10 liters of hot water in 1 minute. It provides for ignition using batteries, as well as a built-in tubular copper heat exchanger. The gas burner is made of stainless steel. Like "colleagues" under the brand name "Ariston", such GKs are equipped with an emergency sensor for the presence of thrust and flame control. The design provides for a temperature water sensor and the "Gas-control" system. The GC is made in a compact case, it is relatively cheap - about 8,000 rubles.

Therm 4000 Series

The line contains the options with the highest demand. Moreover, there is both with AUTO-ignition from batteries or conventional salt (alkaline) batteries, and with piezo ignition (you need to press a separate button in order to ignite the flame). The series provides equipment with three power levels, passing 10-15 liters per minute. The series is equipped with high quality heat exchangers made of copper and efficiently coping with heating. The performance of this node is limited to 15 years.

These models are supplied with a continuously modulating burner flame. The function is used to maintain the set flow temperature at the outlet.

Important! The main plus of Therm 4000 O is that it can be turned on even at a water pressure (pressure) of only 0.1 atm.

Therm 4000S

The main distinguishing point is the presence of a fan that provides forced draft. Columns from this series do not require the installation of a chimney. This is convenient when installing in an apartment or house in which the chimney lining will be problematic.

The output of combustion products in these models, as well as the air supply, is carried out in a coaxial chimney. This element is located on the outside of the wall (horizontally). This is an optional feature and must be purchased separately.

Another technical point: the presence of electronic control in the user panel. It displays error codes and other information about the operating modes or malfunctions of the unit. The control panel also makes it easy for the user to perform tasks such as setting the temperature and others. Accurate flame modulation reduces temperature error to just 1 degree.

It is supplied in three different power types, with capacities ranging from 12 to 18 liters per minute. There is another significant difference in this series - energy dependence due to the fan in the design. Unfortunately, this is somewhat of a minus, because the column will not function without electricity.

Therm 6000O

This line of Bosch water heaters is equipped with a hydrogenerator. Auto-ignition is provided by a flow through the design of the device itself. By opening the tap, the user starts the water supply to the heater, and thanks to the HYDRO POWER technology, automatic start is carried out by means of a hydrodynamic generator.

To ignite the unit, no piezo or batteries are needed. Productivity of models in a series: 10, 13 and 15 liters.

On the user panel there is a liquid crystal display - it displays information about the temperature, which is adjusted with a rotary knob.

Therm 6000 S and 8000 S

These series include industrial options with a capacity of 24 and 27 liters per minute. Such units will freely provide hot water supply (DHW) to several points of intake (4-5) without loss of work power. The units are equipped with electric ignition and a display on the side of the user panel.

The model of the 6000 S series is equipped with two fans at once, which remove combustion products and provide air suction. The 8000 S has a special condensing technology for high efficiency heating of the water flow. The water valve in the 8000 S is also electrically operated.

How the Bosch gas water heater works

For a detailed acquaintance with the design of the Bosch Group of Companies, consider the structure of the device using an example from the Therm 4000 O series, model WR, equipped with piezo ignition.

The operation of a device equipped with a piezo ignition is extremely clear. To start, it is enough to set the thermostat to the “ON” position, press the regulator button, while holding down the ignition button with a piezo at the same time. Hold the temperature control button until the appliance turns on. Use the same switch to select the desired temperature.

If you choose a water heater equipped with automatic ignition, it will be even easier to manage. To do this, open the DHW tap on the mixer, and that's it - the column will start working by itself. This is facilitated by pre-installed batteries. All Bosch water heaters are equipped with branded batteries. They need to be changed about once a year. The device, the igniter of which lights up with the help of a piezo ignition, burns all the time, and in automatic units the flame goes out when the device is turned off.

Overview of popular models

Consider the technical characteristics of the models that are in the greatest demand among domestic consumers.

Bosch WR 10-2P

Flowing gas heater with a capacity of 10 liters per minute and a heat output of 17.4 kW. Maximally heats water up to a temperature mark of +60 degrees. Inlet pressure: minimum 0.1, maximum - 12 atm. An open combustion chamber and piezo ignition are provided. Management is mechanics. There is a heating temperature limitation.

The GK is installed vertically on the wall and requires a bottom connection. The dimensions of the case are 31x58x22 cm in width, height and depth, respectively. The weight of the structure is 11 kg. Version P23 is designed to use natural gas, P31 - liquefied.

Price from 8600 rubles.

User opinion

Maria, Kaliningrad

What I like: mechanical control, no batteries. The wick will burn while you are at home. No flaws, so far has not required maintenance.

Dmitry, Moscow

At work, this is a great technique. Nothing extra. Externally made very high quality. But after a year of work it started leaking. Holes in the heat exchanger constantly have to be soldered. Tired already. Piezo ignition initially did not work, although there is a spark. You have to light it with matches. The Portuguese disappointed, regretted that he fell for the German brand.

Sergey, Suvorov

Easy to use and doesn't take up much space. Hanging for almost 3 years. Unfortunately, it does not heat well in winter - it cannot be set up, and the pump is “to the point”. The master said that the problem is that I live on the top floor of a Soviet-built house. Who knows ... by the way, everything is in order in the summer.

Bosch WR 13-2P

A gas water heater with a capacity of 13 liters and a heat output of 22.6 kW will heat water up to a maximum of 60 degrees. The inlet pressure is from 0.1 to 12 atm.

This model can run on LPG. The combustion chamber is open type. Piezo ignition provided. Management is mechanics. There is also a water temperature limiter. Installation of the device is classical - vertical. Attaches to the wall. Dimensions (WxDxH): 35x65.5x22 cm. GK weighs 13 kg. Price - from 10 880 rubles.

User Reviews

Snezhana, Tver

Wonderful unit. In use, however, not very long, but there are no obvious shortcomings. Compared to the old almost Soviet contraption, this is an excellent technique. When you turn on the water, the heating is smooth - you don’t get burned, and this is a significant plus. It works quietly and does not rattle when the water is turned on. The dimensions are modest, it didn’t take up much space, so there are only advantages.

Alexey, Kaliningrad

This is my first column, so there is nothing to draw a parallel with. She worked for me for almost 5 years. In the third year of operation, I discovered that the wick was going out. I watched a video on YouTube on how to clean it, so I decided the issue myself. By the way, the piezo ignition also doesn’t work very well, so I always keep matches nearby. Otherwise - nothing, enough for a family of 4 people. Set up at two points: bath and kitchen. Filtering was not set.

Typical breakdowns

Most often, the owners of the Bosch Group of Companies are faced with such equipment malfunctions:

• The igniter goes out or the main battery does not turn on on the first ignition attempt. In this case, you need to clean the pilot burner of the device.
• The wick is extinguished or the igniter goes out when the user turns the tap on the mixer. Check the gas pressure reducer if the work is carried out on liquefied gas (in cylinders).
• The water is not warm enough. Perhaps the thermostat is set incorrectly.
• Igniter goes out from time to time. Most likely, the thrust sensor or thermal sensor is triggered. The elimination of these breakdowns should be entrusted to the master.
• Insufficient water pressure through the GC. The heat exchanger, the water unit or the mixer itself could become clogged. It is worth identifying the blockage and cleaning it.

Thanks to a wide range of functions and high quality, the Bosch geyser is very popular all over the world. With the help of this unit, you can create an autonomous hot water supply in an apartment, private cottage or country house. There is a great abundance of models of this brand on the market, among which a simple buyer can get confused and buy a Bosch geyser that is not suitable for certain conditions. To avoid such a situation, you should study in detail the principle of operation of water heaters, characteristics and varieties.

Rating of the best models of geysers Bosch

On the official website of the company, a wide range of Bosch gas water heaters is provided, so that each consumer will be able to choose an option for himself in terms of cost and technical characteristics. Each classification differs in the type of ignition, power and performance, but they are all made in two main shades:

• white;
• grey.

Modifications are made at the Portuguese factory, but Bosch devices can be purchased in Moscow, St. Petersburg and in any other city through official representatives. There is a separate series of geysers, which is assembled in China, in fact, it is the most budget option. Let us consider in more detail which versions of devices are supplied to the domestic market.

Bosch 2000-O THERM

This line is considered the cheapest, since it has a relatively low productivity of up to 10 l / min. and involves working in combination with one water intake point.

The water heaters have a battery ignition system, a tubular type heat exchanger made of copper material and a steel burner. The units have a controller for the degree of thrust and the level of the flame. The devices were also equipped with a temperature sensor for the liquid and gas flow. This version includes the Bosch W 10 KB device with compact dimensional parameters and an estimated cost of 8,000 rubles.

Bosch 4000-O THERM

The most popular series of Bosch geysers, which is available with an automatic ignition method or piezo ignition. In the first case, water heaters operate on batteries and require regular replacement of the voltage source, the second option requires constant pressing of the key to start work. 3 varieties are supplied to the market, with different power indicators and performance levels - 10-15 l / min.

BOSCH WR 10-2 R23

The units have a heat exchanger consisting of a copper material, due to which the device has an increased service life of up to 15 years. In addition to all modifications, they are equipped with a smooth modulation of the burner fire, thanks to which the device is able to independently maintain the specified temperature regime even with pressure surges.

One of the most important advantages is the possibility of functioning at a water pressure in the plumbing system of 0.1 atm.

This classification includes the following models:

• modifications of the machine with the prefix "B" - WR10 2V, 13 2V, 15 2V;
• semiautomatic device with the prefix "P", indicating the presence of a piezo ignition - gas water heater Bosch WR 102P, 13 2P, 15 2P.

Each option has an individual column ignition method. In the first case, ignition is carried out without the user's participation when the water tap is opened, in the second case, you need to set fire to the wick in the device by simply pressing the desired key.

Water heaters with piezo ignition are significantly cheaper than electric ignition devices, but each of the options has its drawbacks - the need to replace batteries, the inconvenience of turning on the column at arm's length, etc.

Bosch 4000-S THERM

The main distinguishing characteristic of the devices of this series is the presence in the design of a fan that creates forced draft. The devices are able to function without a chimney system, so there is no need for special maintenance. Such units are especially relevant for apartment owners in which it is not possible to equip a chimney.

Therm 4000 S WTD 12AM E23

The output of combustion products and the supply of fresh air is carried out by a coaxial chimney. This element must be installed horizontally through the wall directly to the street. It is sold as an additional option and, as a rule, is supplied separately from the geyser.

Also in the units there is a digital display for determining error codes, setting the temperature regime and other programs. This device, thanks to the burner fire modulation device, can maintain the set mode with an error of up to 1 ° C.

The line includes the following models:

• WTD 12AM E-23;
• 15AM E-23;
• 18AM E-23.

From this it becomes clear that modifications are made in three versions in terms of power and intensity of heating 12-18 l / min. They have a drawback - the devices are powered by 220 V, so the models are considered completely volatile.

VIDEO: Geyser Bosch Therm 4000 O (review and setup)

Bosch 6000-O THERM

Bosch 10 2G, WRD 13 2G, 15 2G devices are equipped with a hydrogenerator and automatic ignition of the burner, which is carried out by means of a water flow. When the tap is opened, the liquid circulates into the column, and the Hydro Power system automatically starts the device with a hydrodynamic generator. In this case, batteries or a piezoelectric element are not required.

Therm 6000 WRD 10 2G

As for the heating efficiency, it is 10-15 l / min., Depending on the modification. The control panel is equipped with a liquid crystal screen, which displays all information about the operation of the device.

Geyser Bosch 6 000-S, 8 000-S THERM

These series are considered industrial because they are capable of producing 24 and 27 l / min. and work on 4 mixers. Geysers have electric ignition and a liquid crystal screen on the front of the panel.

THERM 8000 WTD 27 AME

In the first case, the units are equipped with two fans, in the second - with a special condensation device and an electric drive.

Frequent problems

Each consumer should be aware of the problems that he may encounter when operating a Bosch geyser. Regardless of which W10 KB or WRD 13 2G model it is, where it was purchased and at what price, the following situations may occur during use:

1. The water heater does not ignite or the fire goes out a few seconds after starting. Ignition burner needs to be cleaned.
2. The wick goes out when the water collection starts. The fuel pressure regulator needs to be checked. This must be done if the device operates on bottled fuel.
3. The liquid warms up insufficiently or does not change the initial temperature at all. It is necessary to examine whether the temperature control knob, which is located on the front of the control panel, is set correctly.
4. The igniter goes out for no reason. Probably, the controller of the degree of traction or the temperature regime of the water is turned on. This will require the intervention of a Bosch gas column repairman.
5. The pressure of the water leaving the column has decreased. The cause of the problem is the contamination of the heat exchanger, tap, water unit. It is necessary to identify the source and clean it up.
6. Water heater with automatic system does not start. The batteries may be dead or damaged, you need to replace them with new ones.

Buying an electrical appliance: pros and cons

In order to understand whether this device is needed in the house or not, it is recommended to read the reviews of real people. We, in turn, analyzed them and received such a summary table.

Advantages of the units:

• high build quality, parts;
• a large assortment with different pricing policies;
• modern technologies;
• no noise during operation.

Cons of devices:

• having problems finding a service center for maintenance;
• high cost of repairs and spare parts.

VIDEO: How to choose Bosch water heaters - what's the difference

The Therm 4000 GWH 10/13 model (water heater) is offered in three modifications differing in their operational characteristics.

It is 27% more compact than its predecessor and is the most compact in its power category.

The main advantage is increased safety: in the event of a malfunction, for example in the event of insufficient air supply, our gas water heater automatically switches off the appliance and thus provides protection.

The minimum water pressure to turn on a water heater with piezo ignition and battery ignition is 0.1–0.2 atm. At the same time, the device works stably and produces hot water with a constant temperature.

All modifications are equipped with a flame modulation system, i.e. automatic power change depending on the water flow. For the user, this means a constant water temperature regardless of consumption.

A characteristic feature of this gas water heater is the developed technology that ensures safety.

Even if the draft is insufficient, the flue gases will no longer get back into the living space. The latest Anti Overflow System reliably ensures the removal of combustion products through the chimney.

Also, all models of the Bosch 4000 geyser are equipped with: flame control, which turns off the gas supply if for some reason the flame goes out; superheat control, which switches off the device if the heat exchanger overheats.

Ignition of the igniter with a simple push of a button. To ignite the igniter, you need to press the igniter gas valve opening button with one hand, and the piezo ignition button with the other hand.

The electrical spark created by the piezoelectric element ignites the pilot burner. After the appearance of the flame 10–15 sec. the gas valve opening button must be held down.

During this time, the thermocouple is heated, which controls the presence of a flame, and with the help of an electromagnet keeps the gas valve open.

The water heater is ready for operation. The power of the water heater is changed by the position of the slider, and the water temperature is changed by the position of the rotary knob of the regulator. If the tap water filter is clogged, it can be easily removed and washed.

Minimum possible ignitor gas consumption - The gas consumption of a constantly burning igniter flame in water heaters has been reduced to the minimum possible.

The pilot burner nozzle is precisely sized to ensure that the flame burns steadily and can ignite the main burner.

Technical characteristics of the geyser Bosch Therm 4000 GWH 10/13

Rated power (regulation range), kW - 7.0–17.4

Permissible natural gas pressure, mbar 13.0

Maximum water consumption, l/min 10.0

Minimum water pressure, bar 0.1

Water connection, R - 1/2

Gas connection, thread - 3/4

Chimney diameter, mm - 110

Dimensions HxWxD, mm - 580x310x220

Fig.1. Main Components

1 - Hood, 2 - Hinges, 3 - Sight glass, 4 - Water volume switch, 5 - Power regulator, 6 - Gas connection, 7 - Flue gas outlet, 8 - Protective flue gas collector with draft control, 9 - Combustion chamber, 10 - Gas valve, 11 - Piezo ignition device, 12 - Water valve

Fig.2. Functional diagram

4 - Water volume switch, 5 - Push button, 6 - Gas, 11 - Piezo ignition device, 12 - Water fitting, 13 - Heat exchanger, 14 - Main burner, 15 - Nozzle, 16 - Ignition inertia unit, 17 - Venturi tube, 18 - Adjusting cone, 19 - Water volume regulator, 20 - Water filter, 21 - Diffuser, 22 - Cold water, 23 - Solenoid valve, 24 - Measuring pipe (supply gas pressure), 25 - Gas filter, 26 - Screw adjustment max. gas flow rate, 27 - Pilot filter, 28 - Hot water, 29 - Power regulator, 30 - Main gas valve, 31 - Pilot gas valve, 32 - Ignition nozzle, 33 - Control valve, 34 - Measuring pipe (nozzle pressure) , 35 - Thermocouple, 36 - Ignition electrode, 37 - Ignition gas supply pipe, 38 - Temperature limiter, 39 - Draft control

Installation of a geyser Bosch Therm 4000 GWH 10/13

Before installing a Bosch gas column:

Before installation, obtain permission from the gas supply company and from the office for cleaning and checking the condition of chimneys.

Place the gas shut-off valve as close as possible to the appliance.

After connecting to the gas supply network, the connection must be checked for leaks. In order to avoid damage to the gas valve due to overpressure, the pressure must be checked with the gas cock closed. After the leak test, release the pressure.

Check whether the type of gas indicated on the type plate corresponds to the type of gas supplied.

Make sure that the flow and pressure on the gas pressure regulator correspond to the values ​​indicated for the consumption of the device.

Installation room requirements:

The device must not be installed in rooms with a free space of less than 8 m3, excluding the volume of furniture, if this volume does not exceed 2 m3.

Observe local regulations.

The installation room must be well ventilated and protected against frost, and must be connected to a chimney.

Do not install the device above heat sources.

To avoid corrosion, the combustion air must not contain aggressive substances.

Corrosion is promoted by hydrogen halides containing chlorine and fluorine compounds. They can be found, for example, in solvents, paints, adhesives, aerosol sprays and household cleaners.

The minimum distances shown in figure 3 must be respected.

Chimney

All gas instantaneous water heaters must have a tight connection to flue gas pipes of the appropriate diameter.

The chimney must:

- pass vertically (with a small number or with a complete absence of horizontal sections);

- be thermally insulated;

– have an outlet higher than the highest point of the roof.

To connect to the chimney, you can use a flexible or rigid pipe. The flue gas accessory must be plugged into the socket of the protective flue gas collector.

The outer diameter of the flue gas outlet accessory must be slightly smaller than the socket of the flue gas safety collector.

The chimney outlet must be fitted with a wind/rain shield.

Bosch 10/13 geyser installation work:

Remove the rotary knob from the water volume switch.

Loosen the cover fixing screws.

Slightly pull the cover forward and remove it by moving it upwards.

Hang the appliance vertically on the wall using the supplied wall plugs and wall hooks.

Water connection

Fig 4. Connecting the water supply

When connecting, make sure not to confuse the cold water connection (fig. 4, item A - not supplied with the equipment) with the hot water connection (fig. 4, item B).

Water pipes are connected to water fittings.

To avoid malfunctions caused by sudden fluctuations in water pressure, it is recommended to install a non-return valve at the cold water inlet.

Bosch Therm GWH geyser malfunctions and their elimination

1. The pilot flame went out again. The pilot flame ignites only after several attempts. The ignition flame is yellow.

Pilot burner blocked - Clean.

2. The pilot flame goes out when the hot water tap is opened. The hot water temperature is insufficient, the flame is weak.

Insufficient gas supply - Check the pressure reducer and replace it if it does not fit or is damaged.

Low room temperature - Check if gas bottles (butane) freeze during operation. If the cylinders freeze, put them in a less cold place.

3. Water temperature is too low

Power regulator in minimum position - Check the position of the power regulator and set it to a higher position.

4. The burner turns off during the operation of the appliance

The temperature limiter has tripped - Switch on the appliance again after 10 minutes. If the problem recurs, call a specialist.

Draft control device activated - Ventilate the room. Switch on the device again after 10 minutes.

5. Reduced water flow

Insufficient water pressure - Check and correct

Water taps or faucets dirty - Check and clean.

Clogged water valve - Clean the filter.

Clogged (limescale) heat exchanger - Clean and, if necessary, remove limescale.

Geyser Bosch Therm 4000 WR 10-2P

The Bosch Therm 4000 WR 10 geyser with piezo ignition works with a constantly burning wick. Depending on whether the device is used in summer or winter, you can adjust the water temperature using a special slider.

A distinctive feature of such a device with piezo ignition is reliability, quality and affordable price.

The device is mounted on the wall and can work in the apartment on natural gas and in the country on liquefied gas.

To operate on liquefied gas, special nozzles must be purchased separately. The nozzles are easy to install, so the specialist will not have problems when starting the device.

The Bosch WR 10-2P geyser with piezo ignition has an accurate water heating temperature due to a stainless steel burner. The flame in the burner spreads evenly, providing an accurate temperature. But all parameters depend on the temperature of the incoming water.

The heat exchanger is made of high-quality copper, which is maximally protected from high temperatures, burnout and the possibility of oxidation.

Equipped with a modulating burner, which ensures a uniform water temperature during use.

The minimum pressure required to turn on the water heater is 0.1-0.2 atm.

Geysers with piezo ignition are designed to work in Russian conditions, for gas pressure up to 5 mbar.

Bosch 4000 gas column adjustments

Water flow regulation

Turn the rotary knob counterclockwise. The water flow increases, the outlet water temperature decreases accordingly.

Turn the rotary knob clockwise.

The water flow is reduced, the outlet water temperature is correspondingly increased.

Lowering the leaving water temperature to the required temperature reduces energy consumption as well as the risk of lime deposits on the heat exchanger.

Emptying the geyser

Close the cold water tap;

Open all hot water taps;

Remove the bracket from the filter housing on the water fitting;

Take out the plug;

Empty the device completely.

Adjusting the pressure in front of the nozzle

Access to adjusting screw

Remove cover.

Connect pressure gauge

Loosen the locking screw.

Connect a pressure gauge to the measuring pipe (pressure upstream of the nozzle).

Rice. 2. Adjustment screw for maximum gas flow

Pressure in front of the nozzle at maximum heat output:

Remove the seal from the adjusting screw (Fig. 2).

Turn on the Bosch gas water heater. Set the power regulator to the extreme right position (maximum power).

Using the adjusting screw (Fig. 2), adjust the pressure in front of the nozzle.

Pressure in front of the nozzle at minimum heat output:

Turn on the device. The power regulator must be in the leftmost position.

Open several hot water taps.

Adjust the pressure with the adjusting screw.

Seal the adjusting screw again.

Checking the correct functioning of the equipment

Check the correct functioning of all safety, control and monitoring devices.

Heat exchanger:

Check heat exchanger.

In case of contamination: dismantle the heat exchanger and remove the temperature limiter; Rinse the heat exchanger under a strong stream of water.

If contamination cannot be removed: Soak contaminated parts in hot water and detergent and rinse gently.

If necessary: ​​remove lime scale from the inside of the heat exchanger and the connecting pipes.

Install heat exchanger with new seals.

Install a temperature limiter on the heat exchanger.

Burner:

Check burner annually and clean if necessary.

In case of severe contamination (grease, soot): dismantle the burner, dip it in hot water with detergent and rinse carefully.

Water filter:

Replace the water filter at the inlet of the water fitting.

Burner and ignition nozzle:

Remove and clean the pilot burner.

Remove and clean the ignition nozzle.

To ensure that traction control works flawlessly, the following steps must be taken:

Remove flue gas accessory;

Replace it with a pipe with a plugged end (about 50 cm long);

The pipe should be placed vertically;

Turn on the device. Turn the power regulator to the right until it stops (maximum power), set the water flow switch to the extreme right position (small water flow, high temperature). Under these conditions, the instrument should turn off after two minutes;

Remove the pipe with the plugged end and install the flue gas accessory again.

Gas column maintenance Bosch Therm 4000 WR 10

If there is a malfunction in the traction control, proceed as follows:

Loosen the traction control fixing screw;

Disconnect the temperature limiter;

Loosen the solenoid valve connection;

Remove the thermocouple from the burner;

Replace the defective part and install the new kit in reverse order.

Geyser Bosch Therm 4000 WR 13

The Bosch Therm 4000 WR 13 geyser is designed to provide hot water supply to apartments and private residential buildings.

A characteristic feature of this column is automatic electronic ignition from batteries, i.e. the absence of a constantly burning flame of the pilot burner, the column automatically starts when the hot water tap is opened and completely turns off when it is closed.

It turns on at a minimum water pressure of 0.1 atm. Automatic maintenance of water temperature when the water pressure in the water supply changes.

The Bosch WR 13 geyser is equipped with a high-quality copper heat exchanger, the atomospheric burner is made of stainless steel and can be adjusted to both natural and liquefied gas, has an ionization flame control sensor, a flue gas control system, and a safety sensor against overheating.

Description of the geyser Therm WR:

For apartments with impaired ventilation and smoke removal.

power modulation.

Separate adjustment for power and water flow.

Connects to a chimney.

Constantly burning igniter.

It turns on at a water pressure of 0.1 atm.

Purpose:

Domestic hot water preparation.

Placement in residential areas (for example, in the kitchen).

Unlimited period of continuous work.

Technical equipment of the geyser Bosch WR 13

Piezoelectric ignition.

Automatic maintenance of water temperature when the water pressure in the water supply changes.

Reverse thrust safety sensor.

Ionization flame control.

Safety sensor against overheating.

Flue gas control sensor.

Burner material - stainless steel.

Copper heat exchanger, service life - 15 years.

Exhaust gas control devices that turn off the device in case of insufficient draft.

Characteristics Bosch Therm 4000

Rated thermal power, kW - 22.6

Permissible natural gas pressure, mbar - 10-15

Permissible pressure of liquefied gas (butane / propane), mbar - 30.0

Natural gas consumption at maximum power, m³/h - 2.8

Consumption of liquefied gas at maximum power, kg / h - 2.1

Gas connection, R - 3/4

Temperature, C - 35.0-60.0

Hot water flow at T 50°C, l/min - 2.0-7.0

Hot water flow at T 25°C, l/min - 4.0-13.0

Maximum water pressure, bar - 12.0

Temperature at max. power, C - 170.0

Mass flow of flue gases at maximum power, g / s - 17.0

The outer diameter of the chimney, mm - 132.5

HxWxD, mm - 655x350x220

Weight (without packaging), kg - 13.0

Features of the geyser Bosch WR

Wall mounting device

Ignition via piezoelectric system

Burner for natural gas/LPG

Heat exchanger does not contain tin/lead alloys

Power adjustment according to water flow to maintain a constant hot water temperature.

Water fittings made of glass fiber reinforced polyamide, 100% recyclable

Ensuring a constant flow of water at a variable pressure of the water head

Fig.1. Elements

Hood, Hinges, Sight glass, Water volume switch, Power regulator, Gas connection, Flue gas outlet, Protective flue gas collector with draft control, Combustion chamber, Gas valve, Piezo ignition device, Water valve

Operating principle

The instantaneous water heater (geyser) is equipped with a piezo ignition device. This makes the operation more convenient.

Power control from the Off position. move to the ignition position.

Press and hold down the power control button. Press the piezo ignition button.

If the pilot flame ignites: release the power control button after a few seconds.

If pilot flame goes out: repeat process.

In this case: Keep the button of the power regulator pressed until all air is expelled from the gas supply pipe.

If ignition has occurred: by moving the power regulator to the right, set the required power.

With the help of the power regulator, you can set the required power. By moving the knob to the right, power and gas consumption increase. Maximum power is reached when the regulator is set to the extreme right position.

To save energy: set the power regulator to a position that fully corresponds to the required power.

After following these steps, the main burner lights up automatically as soon as the hot water tap is opened, since the pilot flame burns continuously.

To turn off the device: move the power regulator to the left as far as it will go. After a few seconds, the pilot flame will go out.

I have lived in an apartment with a column all my life and I know all their pros and cons. Only here the columns were the simplest (Soviet cast-iron and Astra). And finally, I have a new BOSCH column !!!

Price 9900 rub. on the date 01/12/2015, but I know that it is constantly growing.

VISUAL INDICATORS:

1. It is smaller than Astra, and the diameter of the exhaust pipe is smaller. Dimensions (HxWxD), mm 580x310x220, weight 11 kg.
2. The wick is VERY small, almost does not heat the water, it is needed for the gas control sensor.

   During the day you can not even see how it burns.

   Why "everything that was previously impossible" is possible.

   1. A small wick does not heat the water (immediately after switching on, no boiling water comes out, no need to drain, the water does not boil away and no scale is formed that clogs the column).
   2. You can not turn on the water to the full and not be afraid that the column will go out (thus adjusting the pressure and temperature of the water).
   3. You can simultaneously turn on both taps with water (hot and cold), the column does not start to hiss and go out.
   4. Excellent pressure allows you to turn on the water in the kitchen and in the bathroom (before, there was only enough pressure for one thing).

   Why "no savings".

   We had a problem that the cold water pressure was good, but there was a thin stream from the column, the column barely caught fire. And now I turn on the water only halfway and I have enough. So now my water meter is winding like crazy ((((

   Another plus would be to note the presence of gas control, water filter, overheating sensor.

   
   Highly comfortable andneat appearance of adjusting the water pressure and temperature.

   
   

   For those who understand this

   

   

   

   

   The installer of the column (called from the store where it was bought), after careful questioning, admitted that she could have only one problem. Once every two years, it is desirable to clean it from dust (the column is designed in such a way that draft is formed in it from the bottom to the top and therefore dust, fluff in summer, etc. lingers inside). But this is only if she began to ignite badly. And in all other respects, he said that this particular model is the most ideal option, nothing superfluous and not expensive !!!

   I'm really satisfied! Well, unless you count the increase in water consumption of course))))))

After the German company Bosch began to produce gas water heaters under its own brand, the products firmly began to occupy a leading position. A feature of the company's geysers is their completely "white" assembly. And, as you know, European quality is valued all over the world for its reliability and durability. All this imposes on the company an obligation to provide customers with a long warranty period (2-3 years) for their equipment.

I would especially like to pay attention to the WR-13 range of geysers, which was created specifically for two gas supply systems - stationary and bottled, running on liquefied gas. Under our conditions, none of the above methods of gas supply can be neglected. Thanks to this range of gas supply, the system has a high protection against changes in gas pressure and overheating.

In this line there is a type of speakers WR 13-2, which has proven itself with multifunctionality, lightness, small size and undemanding installation conditions.

In particular, this type of column is divided into three subspecies depending on the launch system: P - piezo ignition, B - auto ignition and G - hydro generator.

The advantages of geysers WR 13-2 is the presence in them:

• components from Europe, including assembly;

• main elements made of stainless steel, including burner nozzles;

• flame control and air draft;

• water flow regulator;

• safety overheating;

• ionization control fuse.

Bosch WR 13-2 is designed to simultaneously heat water for washing dishes and taking a shower. The device allows you to pass water through itself with a productivity of 13 l / min, heating it with a power of 22.60 kW.

With high performance, the WR 13-2 has a very small size of 66x35x22 cm (HxWxD) and an acceptable weight of 13 kg.

The device allows you to raise the temperature by 25 degrees from the initial water temperature with a productivity of 13 l / min. or 50 degrees - with a capacity of 7 l / min. The cost of the WR 13-2 range ranges from 9,000 to 13,000 rubles.

In order for the device to be installed at home, a chimney with a diameter of 13 cm must be installed in it.

Due to the fact that the geyser can not only function from a stationary gas supply, but also from a bottled one, it can be used both in urban conditions and in country apartments.

By installing the WR 13-2 in your premises, you will forget about the time when you felt discomfort from the lack of hot water, and you will no longer have to pay monthly utility bills for expensive hot water.

Compactness, safety, quality and durability of WR 13-2 will allow you to receive comfort from use of this device.

And finally, when starting to produce gas water heaters, Bosch made sure that in each regional city there was its gas water heater service center, so when you buy the WR 13-2 model, you not only insure yourself against malfunctions, but also provide the necessary preventive maintenance of the device.

So, by purchasing the WR 13-2, you embody the motto in your life: “Let the water of the required temperature flow, and the device does not fight!”.