Do-it-yourself stump bench. We make wooden benches that are easy to make with our own hands. Log benches

Benches and benches in the country and in the garden are primarily a place of rest. But just putting up a bench is not interesting. After all, you can create a beautiful corner. In order not just to relax, but to enjoy nature and the fruits of your labor. There are many interesting ideas. Moreover, the simplest designs are often played up, such that any person whose hands grow from their shoulders can make these benches with their own hands.

Photo of original benches (ideas for summer cottages and gardens)

Everyone knows what ordinary benches look like - they have seen it more than once. But the usual - the simplest - something does not want to. Especially if you have already begun the process of decorating the site or are just planning. Why not start from the bench? And there and other decorations will catch up. It's worth just getting started.

In the garden or near the house, I want to have more greenery: beautiful and different flowers. - that's good, but why not combine them with a bench.

What could be easier? Two wooden boxes in which flowers are planted and between them a pair of planed and polished boards. You can put this bench near the wall, and fill a couple of long boards on the wall - there will be a back.

Not everyone likes wooden flower beds: wood requires care, and without it, it quickly loses its appearance. It is especially difficult to care for a tree that comes into contact with the soil. Instead of wooden boxes, there can be, for example, stone or concrete pedestals.

It is very easy to make such a bench in the country with your own hands. You can find ready-made concrete flower beds or do something similar. You can buy a board processed, or you can do it yourself. Instead of a board, there may be half a log - depending on the style in which the site is made out. It is easier to fix the seat with a metal corner. It is attached to concrete with dowels, to wood - with self-tapping screws from below or through bolts.

If someone has large plants in durable flowerpots, you can implement the following idea. In this embodiment, the bench covers the plants. To avoid surprises, flowerpots must be very durable ....

There is a similar version of a bench made of boards and without plants: it may need to be placed on or in. The supports are made up of boards of the same size, and the seat is made of timber.

Bench made of boards - a non-standard option

And another variation on the same theme: hollow building blocks are used as a support. Processed bars are inserted into the holes. This is the bench seat. Just round the edges of the beam, or it will be uncomfortable to sit.

For this garden bench, it is desirable to find large blocks with thick walls. If not, you need to securely fasten the blocks one to the other. The whole task is to fix the blocks first (for example, with studs), and then to them - the bars (with bolts or dowels).

Log benches

If your site is decorated in a rustic or ethno style, the standard approach will not work for you. It is best to use logs in this case - with or without bark - this is your choice.

Seat for a bench made of logs - sawn along the trunk of a large or medium diameter. The back is either a smaller diameter trunk, or just a cut closer to the edge. The legs can also be made from narrow pieces of logs (see the photo below).

Log bench - quick and easy

The legs and seats are interconnected with metal pins: a hole of a slightly smaller diameter is drilled under the pin in both parts. The pin is hammered into one of them, the second part is planted and also hammered, but they are not hitting the pin, but the wood. So that there are no traces, they lay a piece of an unnecessary board and knock on it with a hammer (or sledgehammer). Such a connection should be quite reliable, but to be sure, you can install two or three pins, or you can chop off a little log, making a flat area of ​​the same size on both connected parts. By increasing the area of ​​​​support, increase the reliability of the seat fastening: after all, the log weighs a lot.

Bench option without back

Another interesting option in the style of "ethno" is presented in the photo above. It is implemented in stone, but you can also make this bench from a log. The seat is a very thick board, the legs are the bulk of the large diameter deck. A groove is cut in the deck for laying the seat. If you have a tool (you can make a cutout with an ax, a grinder or a chainsaw), it's easy to do.

Often in the country you need a desktop. From a log you can make not only a bench, but also a table. A variant of such an ensemble is in the photo. Only the tabletop is made of boards, all other details are logs of different diameters or from half.

A greater degree of processing is inherent in the next bench in the same style. The back, legs, armrests are made of thick and not very thick branches, the seat is made of sanded and processed (peeled and sanded) unedged boards.

Another bench is almost also made. Only boards and branches are located in a different direction and a different view is obtained. A do-it-yourself bench of this type does not require much skill. In this case, the more careless the work is, the more decorative the result.

Wicker back - you will meet infrequently

Around the tree, you can make a platform for relaxation and a bench. The designs are simple, making the flooring is generally simple.

You can add a rest group and. And you can put it above the bench - this is the "progenitor" of the usual arch - one of the types of light gazebos. And so that relaxation is completely complete, you can do, or.

From metal and wood

Few people will put fully metal benches in their country house. They, of course, can be very beautiful, but in the summer they heat up to incredible temperatures, and it gets a little colder - you can’t sit on them, as they are too cold. Benches made of metal and wood are deprived of these shortcomings. The legs and supporting structure are made of metal, and the seat and back (if any) are made of wood. Moreover, there are also interesting benches in modern design.

Rectangles are welded from the profile, jumpers are welded to the side walls, on which the seat boards rest. Simple, stylish, reliable, functional.

In a more advanced form - with armrests, backrest, soft cushions on the seat, this design may look like in the photo. The wide seat turns the bench into a sofa, and cushions add comfort - fabric-covered furniture foam rubber. The tables are made in the same style - a frame made of corrugated pipe and a tabletop made of boards.

One important point: if you are making a seat or tabletop from several adjoining elements, they do not need to be joined back to back. There should be a gap of 3-4 mm between adjacent boards / bars. Wood swells and shrinks. In order for the surface to remain relatively flat during these processes, a gap is needed.

If smoother lines are needed - for families with children - you can bend the pipes and make garden benches and a table with rounded edges. This garden furniture is completely safe. The usual round or professional pipe is bent, leaving on the sides in the shape of the letter "P" with a wide back. The length of this back is the length of the bench. For the table, the dimensions are made a little larger: the legs and the back are longer.

Make two identical blanks on the table and bench. Next, cut the boards of the same length. For a seat about 40 cm, for a tabletop at least 55 cm. They are attached to the pipes with furniture bolts with a flat head. To prevent the caps from sticking out, a hole of a slightly larger diameter is drilled under them.

Board benches

The largest group is benches and benches made of boards. There are designs that are more reminiscent of sofas, especially if you put soft pillows on them - and you can lie down.

Garden furniture in a modern style is easy to assemble: rectangles with partitions made of thinner boards, interconnected.

Even the usual design of a country bench can become exclusive if you approach it with imagination: wooden wheels are used instead of legs and armrests. It turned out to be a designer thing.

A bench made of boards with a back and wheels instead of sides - looks interesting

And the simplest possible one is a board with legs in the form of the letter “X”. Such shops were built centuries ago, you can see them today.

From the boards you can make a bench in a modern style: in the form of the letter "P". With this design, the main task is to ensure rigid fixation of the legs and the seat: the bursting forces are not compensated by anything. In this case, it is important to take a thick board or timber so that it does not sag. You can put the board "on edge": so the rigidity will be greater. To increase reliability, you can install corners from below.

The photo shows a 45° cut. Having a miter box or a circular saw makes it easy to achieve an accurate cut. By precisely docking the workpieces and fastening them, we get an angle of 90 °. If the seat does not bend, it will serve for a long time ...

An interesting and reliable version of the bench is shown in the photo below. The legs are assembled from boards of different lengths: every second one is shorter by the width of the board for the seat. Interesting idea. It is easy to make such a bench: it is important to maintain the dimensions, and everything is connected very simply: with nails into the face of the seat.

original benches

Here, it seems, what else you can think of .. but it turns out, a lot. For example, attach the seat to a large stone.

Make a structure out of bamboo trunks.

Or stone.

Sitting in winter will be unpleasant, but beautiful ...

How to make a bench: photo reports

We will not make benches from stone - not everyone has the equipment, but from different pieces of wood - we can. Let's talk about the manufacture of simple, but unusual designs. So that a bench made with your own hands is a source of pride.

Bench without back

The design is simple, but it looks interesting due to the specific material. For the legs, a bar with rounded edges is used. If you have small logs, you can cut them on the sides. You get almost the same effect. Such material is not so rare, the legs are unusually assembled from it: the bars are laid one on top of the other flat. This adds zest and adds appeal.

This bench without a back has a length of about 120 cm, a width of about 45 cm, a height of 38 cm. You can round the edges of the beam with a cutter, or you can find a similar profiled one. It costs more, but it will be easier to work with it: it is already well processed and connects simply.

Depending on the found section of the beam, calculate the length that you need. Determine how many bars will have to be stacked one on top of the other to get the height you need. In this case, it took 5 bars per leg. Total 45 cm * 5 pcs - 2.25 m. It took 4.5 m of timber for two legs. A board 40 mm thick and 90 mm wide was used on the seat. For the seat you need 5 boards 1.5 meters long. It turned out 1.2 m * 5 pcs = 6 m.

First, we cut and process the boards for the seat. Their edges must be rounded. If there is no grinder or milling cutter, you will have to work with sandpaper, but you can find such a board or arrange at a sawmill to process it for you, and also grind it: there will be much less work. So, we cut the boards of the same length, grind and varnish (with or without tinting - your choice).

Fold the leg bars one near one, aligning their edges. Using a square and a pencil, draw lines where the fasteners will be placed. The distance between the lines is 7-10 cm.

You can take metal pins, or you can make dowels - carved from wood. Holes are drilled under them slightly smaller than the diameter, the depth of the hole is half the length of the pin. Then they are hammered into one part, a second part is pushed into the same hole from above. The connection is reliable, but to be sure, you can add glue, although then the design will turn out to be one-piece.

With a pin connection, the main task is to make holes strictly one above the other, so that the parts mounted on the pin give a smooth edge. We did part of the work - we drew lines where we will drill, now we need to measure the same distance from the edge. Let's create a template for this. We take a piece of plank with a width of about 1.5 cm. At this distance from the edge of the bars, we will drill holes. Having applied it exactly along the edge, we mark the intersections with the applied perpendicular lines.

We will install the pins in a checkerboard pattern, so we will drill holes through one intersection. We also make holes on one bar from different sides in a checkerboard pattern. In a similar way - on the pins - the legs are connected to the seat: two pins for each bar.

Technologically, this type of connection is correct, but it is complex and requires a certain skill. You can do it easier. Fold all the bars one on top of the other, secure with clamps, drill through in two or three sets - in the center and along the edges, connect with a long hairpin, with washers placed under the cap and nut. To the legs of the seat strip assembled in this way, you can nail it on top or try to make a pin connection.

The bench is made by hand. Remaining finishing work

If you nailed the seat, take some wood putty of a suitable color, add some very fine sawdust and stir. Coat the joints with this composition. When dry, smooth with sandpaper. Sand all parts to a smooth finish and coat with lacquer or wood paints for outdoor use (preferably not covering, but which leave the grain of the wood visible).

How and with what you can paint wood read. It refers to lining, but painting techniques remain the same, and the compositions must be taken for outdoor use.

DIY bench from broken chairs

In any household you can find two old chairs. They should be the same and still strong enough. We disassemble the chairs, leaving the part with the back and legs. We connect the two backs with the help of bars of a suitable section.

For greater rigidity at the bottom, at a distance of about 20 cm from the floor, where the chairs used to also have jumpers, we make another frame with transverse rails. It can be used as a footrest or for storage of any things.

After grinding, we paint the resulting structure. This time the paint should be ordinary: different types of wood can only be painted over with covering paints. Apply with a brush or spray bottle.

The point is small: cut the seat out of thick plywood (thickness 8-10 mm) and cover it with foam rubber and fabric.

Pallet garden chair/bench

Everything is useful in the economy. Even from cargo pallets you can make garden furniture. Moreover, there is no need to disassemble them: we use one for the seat, we will make the back from the second. All you need is well-crafted planks for the armrests and bars for the legs.

In one of the pallets, we strengthen the attachment points by inserting pieces of bars. After inserting, we fasten it with self-tapping screws on one side and on the other.

From a beam with a cross section of at least 100 * 100 mm, we cut four identical segments 80 cm long. We fasten them in those places that have just been reinforced. We leave 20-25 cm on the legs. We fasten with four long self-tapping screws - 150 mm and not shorter.

It is important to maintain verticality and leave the same distance on the legs. Then the seat will stand straight. If there are errors in height, you can try to file, but then you will have to cut from above - so that the armrests are even. So try to screw it straight. Deviations from the vertical can be dealt with only by screwing the leg again.

We attach a second pallet to the rear racks, and on the sides - planks for the armrests.

It remains to cut a piece of furniture foam rubber and cover it with a cloth. You can make pillows for the back. If you are not going to process everything thoroughly, but to make a loft-style chair, go over with sandpaper or a grinder, treating all surfaces to smoothness. You can cover with paint, giving the wood a dark color.

Drawings of benches made of wood

Video lessons

A few videos on how to make benches with your own hands.

All photos from the article

Garden furniture is most often just bought. Finished. And if you want it to be original, and at the same time, after uprooting the site, a few logs remain? Or did a couple of boards not come in handy when building a barn? The topic of our article is a do-it-yourself wooden bench.

Option 1: a bench made of sawn logs

Material

• Several thin skinned logs;
• Two galvanized threaded studs M10 - M14;
• Four nuts with wide washers;
• A handful of screws about 100 millimeters long.

Appearance

• Cut the short legs so that the horizontal support of the seat is screwed to the horizontal surface with screws. In long logs that combine the function of the back and legs, make cuts of the appropriate shape. (See also the article.)
• Pull the legs crosswise with studs, having previously drilled holes. The screws for this connection are not strong enough.
• You will need to rip cut three logs. One of them will go to those same horizontal supports.

Tip: A circular saw will help you cut evenly. After a chain and even more so a hand saw, you will have to spend a lot of time aligning the cut.

• The photo is hard to see the slopes between the legs and the central horizontal jumper. They are necessary: ​​without them, the bench can simply fold to the side.

Option 2: a bench made of thick logs

Material

• Logs with a diameter of 30 centimeters;
• Solid wood for making dowels.

Appearance

• Logs are connected only and exclusively by dowels. Impregnation of pins with drying oil or a synthetic analogue is required.
  Diameter - not less than 20 millimeters. The material is solid wood without knots.
• Despite the abundance of synthetic adhesives, organic adhesives remain the best for wood: casein and albumin (based on milk and egg proteins). Not only dowels are smeared with glue, but also the planes of cuts of logs.
• The thickness of the logs will not allow moisture fluctuations to lead the wood; however, drying oil or aquatex (hydrophobic primer for wood) will allow them to retain their appearance much longer.

Option 3: stump bench

Material

• Two thick stumps sticking out of the ground at a distance of no more than two meters;
• A wide board with a thickness of at least 50 millimeters.

Please note: instead of a wide board, you can make a seat by typing it from a bar of small width. 50x50 millimeters would be a reasonable minimum.

Appearance

• For fresh stumps with hard wood, nails are also suitable - two hundred. However, here, too, the best option for attaching the seat is solid wood dowels and albumin glue.
• It is desirable to proliferate a seat assembled from a bar even before assembly. The bars must be protected from moisture and from those sides with which they are adjacent to the stumps and to each other.

Option 4: bench around a tree

materials

• A tree growing in front of the house with a thick trunk;
• Board;
• Black self-tapping screws 75 - 100 millimeters long.

Appearance

H It is often a pity to throw away or use a stump, log or stump for firewood, because it can be used to create a beautiful and unique thing in nature. For example, a table, a chair or a flower bed for a garden can be made from a stump or a log, all kinds of beautiful crafts are made from stumps. Let's look at what you can do with your own hands from a stump, hemp or log, what crafts for a garden from stumps, logs you can make yourself and what you need for this.

Content:
1.
2.
3.
4.
4.1
4.2
4.3
4.4
4.5
5.
5.1
5.2
5.3
5.4
5.5
6.
6.1
6.2
6.3
7.

General requirements for wood

Our future craft from a stump or log should initially be dry wood. Fresh wood must be dried for at least 1-2 months at a temperature of 15-25 degrees. It is best in a dry room and / or without direct sunlight, otherwise our stump may crack and crafts from it may not work.

Frankly rotten stumps or logs should not be taken, but if the stump is a little rotten on the outside, such a stump can be used by treating it with a grinder with a brush, removing the rotten layer from it, in which case something can be made from it. The bark can be removed before drying the stump, for which it is convenient to use a chisel and a hammer or an ax, or you can leave it, it will need to be well treated from decay, for example, with iron sulfate and varnish.

If you have a stump on the site that you have wanted for a long time, be sure to do it, or use it untouched, ingrown into the ground - this option is also applicable for arranging a table or chair from a stump or decorative crafts for the garden.

How to make a chair, stool or chair from a stump, hemp or logs with your own hands

The options for chairs made of hemp and logs, as well as tables, are endless. There are two main technologies for creating a hemp chair or stool:

• roasting method,
• chainsaw.

Using the firing method to make a chair or stool is quite simple. First, the log is sawn lengthwise crosswise to the desired length of the legs. The slots are wedged with wood chips. Small chips, branches are poured into the wedged cracks, a little gasoline is added and set on fire, fuel is gradually added to maintain combustion and ignite the bulk of the log. This burns out the center of the log. After the necessary firing of the angle grinder with a brush-brush, excess coals are removed and a do-it-yourself stool is made from a log or hemp on 4 legs. Further processed.

The necessary workpiece is cut out with a chainsaw and then the angle grinder is polished, or it is fired, painted, etc. You can also put the stool on furniture wheels by screwing them from below, while the bottom surface should be perfectly flat. You can attach a pillow to the hemp on top, so you can do it. Putting a slice of wood on legs, you will also get a wonderful stool.

Consider several options for a stool and / or chair with your own hands, presented in the video.

How to make a stool from ordinary acacia hemp with your own hands at home (video)

Do-it-yourself hemp stool by firing method.

Do-it-yourself hemp chair-stool (video)

Chair-stool made of hemp (logs) with a chainsaw.

Do-it-yourself garden chair-chair made of logs (video)

A simple log chair is made in much the same way as a stool, but the back is cut with a chainsaw, as in the video below.

Hand-shaped log garden chair (video)

Chairs or armchairs from logs can be made in any shape and size, for example, in the shape of a hand. To do this, you need to work well with a benzo or electric chain saw.

Gallery of photographs of chairs, armchairs and stools made of logs, stumps

Finally, options for creating armchairs, chairs, stools from logs and stumps.

As you can see, there is nothing particularly difficult in making a chair or stool from a log, the main thing is to approach the matter with soul and diligence.

How to make a flower bed or flowerpot from hemp, do-it-yourself logs

What else can be done from hemp or logs in the garden? Well, of course, a flower bed! For flowers or seedlings. There are again a great many design options here, we will try to identify the main ones.

In its simplest form, a core is cut along a log of the required length with a chainsaw and / or an ax to make a container for backfilling the earth. The container is covered with polyethylene so that the log does not rot and the flower bed for the garden is ready.

The second option is a log cabin. We build a small log house from logs, and it is desirable according to all the rules. That is, with the device of a small foundation and the caulking of cracks between the logs. The base (foundation) for a flower bed with your own hands in its simplest form is stones, on a cement-sand mortar. It is best to caulk the gaps between the logs with moss, it is more beautiful. Then you can paint the flower bed with varnish or paint.

A flowerpot or pot made of logs is easy to make. We set the log vertically and, using a chainsaw, a hammer with a chisel or an ax, cut the core to the desired depth. We cover the formed niche with polyethylene, lay the ground and plant plants. The flowerpot can be varnished. You can do the same with the stump that "grows" in your area.

A couple of videos to illustrate.

How to make a flower bed from a log with your own hands (video)

Do-it-yourself vase from a log (video)

How often when walking through a forest or park, we see thick dry branches broken by the wind, snags or pieces of rhizomes. It is a pity to pass by such material. A person with fantasy immediately presents a beautiful, functional thing. Crafts from tree branches can decorate the courtyard of the house or the interior of the room.

Man instinctively associates himself with nature, considers himself a part of it. Therefore, any natural material - stone, wood brings comfort and tranquility to housing. Wood is a warm material. It absorbs moisture, creates a healthy microclimate. Not without reason, in a log house it is so easy to breathe, sleep well. The best bath is also wooden. You can put unusual furniture made of branches in it - a bench, a hanger, stools. It smells of pine resin, birch broom. This adds vigor and strength.

What can be made from snags and branches? From different parts of the tree, you can make furniture and decor.

You can’t put stump furniture in a house or on a veranda. But such an armchair or chair is well suited for the yard or summer cottage. The original decision of the table and seating from stumps and thick branches will attract the attention of your neighbors and guests. In order to make such items, you need to have artistic taste, woodworking tools, time and patience.

The main advantage of stump furniture is the lack of material costs. Everything can be done even without nails, using a hacksaw.

Furniture made of stumps and driftwood will be in harmony with the rustic style of the site. A real or decorative well made of a log house, a wicker wattle fence or a fence made of thick branches will look good.

The simplest solution is a bench of two stumps with a thick board laid on them. You can leave it without a back, or you can equip it with a back made of polished thick branches. It will be beautiful and unusual. It will be a combined furniture made of branches and stumps.

Even the traces of time that inevitably appear on the tree do not spoil the appearance of garden objects and look natural.

Furniture from roots and stumps is massive, durable. From a solid high stump, you can cut down an armchair or a chair with a back with an ax. The root can be put on the armrest of such a product.

The most difficult thing is to deliver the forest material to the site, load massive logs or stumps onto a truck.

Stumps are used to make stable stools. They are also sanded and varnished. You can decorate the body of the stump with carvings. The top is colorfully decorated with colored glass or flat stones. They are glued to liquid nails or epoxy.

Furniture made of snags and thick curved branches are real fabulous creations. Details of products are fastened together with self-tapping screws, carpentry glue, depending on the configuration of the items. Branch furniture is a space for imagination. From this material, you can build a semblance of a small gazebo. It is good to plant wild grapes near it, which will eventually braid the tree.

The material for a garden chair, sofa or chair is cleaned of earth, dirt, the bark and the top layer of the rhizome are scraped off to light wood, impregnated with stain and varnish.

Furniture made of branches creates a feeling of openwork weaving.

The garden plot of creative owners is inhabited by fairy-tale characters - goblin or birds - products made from snags, gnomes from tree roots and other forest dwellers. Logs turn into bears, frogs - princesses and other figures.

To make furniture from branches or furniture from stumps, the wood must be dried well so that it does not rot. To protect against bark beetles, it is treated with antiseptic compounds.
Crafts from branches with their own hands give the interior a romantic style. An exclusive thing you can do with your own hands.

There are many varieties of such crafts. Hand-made crafts from tree branches are wall decoration, various vases, figurines, candlesticks, coasters. If you want your masterpiece to decorate your interior for a long time, you need to choose the right material for it.

Technical requirements for wood:

• For do-it-yourself crafts from tree branches, material that has not been touched by bark beetles is suitable.
  It is necessary to dry the branches for 1-2 weeks at room temperature or 2-3 hours on low heat in the oven. The cabinet door must be opened.
• A product made of branches and snags is treated with wood varnish or, if the craft is small, transparent nail polish is suitable.

The original candlestick is very easy to make. You will need a transparent glass cup, thin branches, glue, twine, a candle.

Work progress:

• The branches must be washed and dried on the battery.
• Cut them into equal lengths.
• Apply glue to the branch and attach it to the wall of the glass. Do this with all the other blanks until the cup is hidden behind a row of branches.
• Outside, you can tie a candlestick with a harsh twine or colored ribbon.
• Insert a candle inside the glass.

According to this principle, you can make a vase, a flower pot for an indoor flower, a pencil stand.

Photo frame. For the base, you need to take a wide wooden frame. You also need even thin twigs, glue and decoration options.

Work progress:

• Cut the branches into equal segments, equal to the sides of the frame.
• Glue each branch onto a wooden base. Cover all 4 sides of the frame with them.
  Artificial flowers or other decorations can be glued in the corners.

From a curved branch, you can make a key holder. It is attached to the door or wall with glue or self-tapping screws.

From pieces of wood, branches, rhizomes and snags, you can make thousands of beautiful and necessary things. The driftwood crafts will be free in cost and priceless in exclusivity. Using paints, varnishes, shiny coatings, you can turn waste material into a unique interior decoration or a functional thing.

Wooden garden furniture will help each owner to make his garden the most unusual and unique. Therefore, among the trees, bushes and flowers, several benches, a table, chairs, swings and even flowerpots should be placed.

These items can be purchased. But in this case, your garden will be like hundreds of others. Therefore, the best garden furniture made of wood will be furniture made by yourself.

It is for the organization of recreational areas in the country that wooden garden furniture is installed. To make such furniture, wooden beams, slats, logs, hemp, branches, snags are most often used.

When making garden furniture out of wood on your own, a number of features must be taken into account.

Firstly, it must harmoniously fit into the overall design of the site.

Secondly, one should take into account the fact that such furniture is mainly located in the open air and, therefore, it must endure the impact of adverse weather factors and withstand significant loads.

Thirdly, it is desirable that wooden garden furniture be light and mobile. It is convenient and practical when pieces of furniture can be moved from place to place or put away for winter storage.

It is desirable to put a table and benches in the garden area.

They are essential for family dinners or friendly feasts in the fresh air.

In order to make wooden garden furniture with your own hands, first of all, you need to decide what exactly you would like. Maybe it will be an original swing for the joy of children and adults?

Or an armchair made of roughly hammered together wooden parts, which looks very stylish and will give your summer cottage a rustic flavor.

If you have an old broken chair lying around, then by attaching a stump to it, you will create a unique element of wooden garden furniture, and the old chair will “live” with a new life.

With a little skill and skill, you can create wonderful puffs from stumps and snags. They can be placed in the yard or inside the house.

When making garden furniture from wood, it is desirable that the wood be raw, as raw wood produces better work. All elements of such furniture are recommended to be covered with a special impregnation and varnish for parquet, which protects the wood from pests.

If you want to get a healing effect from your garden furniture, then put together an aspen chair. After all, it is known that aspen suppresses unhealthy energy.

DIY garden furniture made of wood, branches, stumps and snags will add color and originality to your site. She will always delight the eye and surprise guests.