Finishing the corners in the apartment with decorative corners. Finishing the corners of the walls in the apartment The outer corner of the wall than to close
Today, decorative corners on the corners of the walls are an important element of decor. They help protect problem areas from mechanical damage. Their installation prevents damage to expensive finishes, gives the interior frame a finished look. Let's talk about where such elements can be used, what materials they are made of, how they are attached to the surface.
Scope of use
Corners are the most problematic place. When performing repairs, it is difficult to decorate them beautifully. Wallpaper pasted on them, after some time, lift up and peel off. When furniture is brought into rooms or when rearranged, solid large elements are often damaged, which leads to a sloppy appearance. All this can be prevented by purchasing decorative wall corners and installing them at the stage of finishing. They will completely close the ends with themselves, allow you to form a smooth transition from one material to another, cover up some of the sins of the painter's poor-quality work.
Decorative corners - an element of decor that gives the finish a complete look Source design-homes.ru
In addition to a purely technical function, the corners carry an aesthetic load. If you close the perimeter of the window opening with a white profile, the window will look better. This technique is often used when, according to design requirements, the window is not covered with curtains, but is framed with blinds. In this case, the color of the corner should match the color of the wall finish. When a contrast technique is applied, the profile acts as a separate element of decor. It immediately catches the eye and becomes an original part of the interior.
Designers love to use decorative corners for the outer frame of the doorway. This becomes especially relevant when the thickness of the wall is greater than the width of the door frame. This difference is completely closed by extensions, and then corner elements are superimposed on top of them, the color of which completely matches the color of the door.
The outer corners of the walls, arched openings, ledges and niches need additional protection. Installing corners will prevent the risk of damage from accidental impact. It is relevant when the walls are simply plastered or covered with wallpaper. In addition, it is easier to do cleaning and eliminate traces of hands. If the corners are closed with a plastic profile, it will be easier to keep clean.
Corners can close the ends of the wall, finished with ceramic tiles or wall panels. Often in such materials, the edges remain unpolished, so the edge looks unattractive. Mounting the profile helps to completely hide such a defect.
Another area of application is the decoration of the outer corners of structures assembled using drywall. Today, the technology of creating open shelves, racks from this material is actively used. Joints closed with a profile look more aesthetically pleasing.
Arch, the corners of which are closed with a decorative corner
With the help of decorative corners, you can make a frame for large mirrors, close skirting boards with them, any joints that take the form of an angle. There are profiles for plastering, models for ceramic tiles, profile products for bathtubs, furniture.
Varieties of corners
The appearance of products and their technical characteristics depend on the material from which the profiles are made. It also defines the scope.
metal
For the manufacture of such corners, aluminum, brass or steel is used. Corners made of brass and steel have a smooth, well-polished surface. The aluminum profile is presented in three varieties. There are polished samples, anodized products, corners with a decorative coating on sale.
Most often, such products are used in the furniture industry, but designers also like to use them when the walls are decorated with furniture panels, MDF or chipboard sheets. In this case, a metal profile is selected, painted to match the base material. Unpainted metal corners are suitable for framing mirrors, paintings or posters placed under glass.
Craftsmen use metal corners to create the basis for the installation of light armstrong suspended ceiling structures. With the help of them it is possible to carry out the installation of light plastic panels. They can act as anti-slip pads or protect the edge of the structure from chips and cracks.
Finishing wooden
Their main area of use is the decoration of external or internal ends of walls sheathed with a block house, planken or clapboard. They are made from expensive or cheap types of wood, so they have a different price. They can be additionally painted and varnished, various patterns can be created on the surface using a milling machine.
Recently, designers like to use a technique that allows you to cover the ends of the wall, pasted over with wallpaper or painted with paint. This is only permissible if there are strictly straight surfaces.
Source avatars.mds.yandex.netWhen choosing this finishing option, it is important to consider that a wooden corner is a fragile product, with the slightest effort it can break or crack. Excessive moisture or prolonged overheating can spoil its attractive appearance. Therefore, they should not finish the walls and window openings in the bathroom or in the bath.
Wooden corners - a fragile product
Wooden elements are fastened with wood glue or PVA glue. Liquid nails are suitable for the indicated purposes. If the walls are not concrete, you can also fix wooden corners with finishing nails. In this case, the gap between the edge of the profile and the head of the nail must be at least 10 times the diameter of the fastener.
Silicone transparent corners
Such products are ideal for framing corners covered with wallpaper. They are very soft to the touch. If they close the corners in the children's room, the children will be less injured. The silicone profile has only one drawback: its transparent texture is unable to close the finish defects from prying eyes. This must be taken into account when choosing and purchasing products of such a plan.
Silicone profile is an excellent tool to ensure the safety of children Source d.allegroimg.com
On our website you can find contacts of construction companies that. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".
Polyurethane
With the advent of polymeric materials, the possibilities for decorating residential premises have expanded markedly. On sale there are corners with smooth surfaces, with a complex relief that skillfully imitates the texture of gypsum stucco. In contrast to the plastic profile, the thickness of the shelf is greater. This complicates the installation process, but the appearance of the finish benefits from this. The polyurethane corner creates effect of solidity. In addition, it can be additionally painted with paints used in decoration, but there is no plastic profile.
In the manufacture of products, pressing technology is used. It allows you to create decorative profiles of various shapes. They are not afraid of moisture, temperature changes, serve for a long time.
Manufacturers offer universal white polyurethane corners, they are best suited for painting. There are profiles, the texture of which skillfully imitates wood. Products look beautiful, in which the smooth part is painted, and the upper ornament is decorated in gold. Such corners are ideal for classic interiors. They are attached to a special adhesive composition. For these purposes, you can also use liquid nails.
Colored plastic
Such products have a smooth, even surface. They are made from polyvinyl chloride. Manufacturers produce collections in which products of thirty shades are presented. There are profiles among them that imitate the surface of wood, metal. Their scope is not limited by physical parameters, so the plastic profile is used quite widely. For the design of arches, flexible corners and arched products are produced.
A plastic profile is mounted on a plastered wall simply:
- Glue is applied to the surface of the inner part of the profile with a dotted line at a distance of 30 cm.
- The profile is then applied to the surface of the arch or straight end.
- From above, the corner is fixed with molar tape.
In order to glue plastic to the surface of the wallpaper, it is important to make sure that the canvas “sits” firmly on the surface of the walls, that the glue under them has dried well and provides a reliable adhesion. Otherwise, under the weight of the ceiling, the wallpaper will fall off and hang. It is better to glue the corners a few days after wallpapering.
Video description
The video shows how to glue plastic decorative corners:
MDF
This material is also used for the manufacture of a decorative profile. In the process of its creation, two strips of the same size are fastened together with an adhesive film. It is applied from the front. Its color and pattern matches the color and pattern of MDF. Such products can be used both for decorating external corners, and for framing internal ones. The degree of the angle is not important.
Note! Corners made of MDF are undesirable to use in the interiors of rooms with high humidity.
In this way, the corners of the walls sheathed with MDF panels are formed. Source www.meister.com
Choosing a Corner Design
In order for the decoration of the room to be in harmony with its content, it is important to take into account various factors when choosing a profile. It is important to pay attention:
- on surface materials. If the walls are lined with clapboard, the ends covered with a white plastic profile will look ridiculous.
- On the color of the finish. A red profile will spoil the overall impression if the room is made in pastel colors.
- For styling. The metal profile is not well suited for interiors in a classic style, but it is able to emphasize the high-tech concept.
- On the function of the room. A plastic profile is ideal for kitchens and baths; silicone corners are better for children's rooms. Wooden with chamfers will be appropriate for the design of cabinets.
If the choice falls on wooden corners, designers are advised to match the colors and textures of doors or floor finishes. Then it will look organic. If you want to save money, you can buy wood-like plastic corners.
When creating laconic interiors with a minimalist style, the choice of metal corners becomes justified. They look good in hi-tech, in a loft. The width of the shelf must be chosen such that it completely covers the end of the corner. You need to pay attention to this if the walls are covered with panels, drywall, if additional insulation and soundproofing are performed. For such structures, the edges always turn out to be uneven, the decorative corner covers all defects well.
Typically, the angle between the slope and the wall is greater than 90 degrees. In order for the selected profile to be able to lie well on it, it must be slightly bent. You can do this with both metal and plastic corners. To do this, experts advise putting the product on a flat surface with one edge, and then press lightly from above with your hands and push it along the entire length of the corner with a brush. In the cold season, such a procedure should be done after the product has been in the room for a day and the room temperature is taken.
Video description
The video tells how a metal corner profile is installed on a ceramic tile:
Briefly about the main
Decorative corners help to solve many problems. They improve the aesthetics of the finish, protect the ends of the walls and their inner corners from mechanical damage. The products are inexpensive, they are very easy to install, so if necessary, you can experiment and try to improve the design of an already finished interior.
Many designers prefer not to leave the corners in the apartment raw and add unusual solutions to the interior for this part of the apartment. For others, the decoration can serve as protection if there are animals or small children in the house. Fragile corner wall upholstery requires attention and additional protection. Therefore, this article addresses the question of how to arrange the corners of the walls in the apartment, there are also photo examples.
One of the most problematic areas in interior decoration are the outer corners.
In what cases is it necessary to finish the corners in the apartment?
There can be many reasons for using such a building material. At the same time, each one has a different result of work. But most often this is due to the need to align the corners in the apartment. Unfortunately, builders often encounter such an oversight and have to carry out an additional stage of repair to make the room visually complete.
Decorative corners help to solve these problems.
To make the correct geometric shape, it is necessary to prepare the work surface. For this, the previous coating is removed: wallpaper, whitewash, plaster. Next, the builders carry out the treatment in the form of spraying with an antiseptic and cover with a new layer of primer.
The corner protects the surface from mechanical damage, allows you to hide some flaws in the finish, arrange the transition from one material to another, close the ends of tiles or panels.
Using a special corner, which is sold in every professional hardware store, the necessary shape is set at the corners of the walls. At the same time, time is taken to measure the deviation and evenness of the resulting surface. At the end of the work, special metal fasteners are glued to the corner and additionally treated with a new layer of finish.
There are many options for using corners in the interior.
After performing small construction manipulations, the angle is completely leveled and the desired visual effect is achieved. In difficult cases, absolutely any finishing materials can be used: from plastic panels to plasterboard elements.
Some difficulties arise when finishing corners other than 90 °, this requires special, so-called. folding corners.
In addition to the purpose of leveling the surface, these construction works are carried out to decorate the surface. A wide range of materials allows you to play with corners and make them real elements of the overall interior concept.
They can be used to decorate both external and internal wall corners.
Finishing the corners in the apartment involves the use of various decorating elements. This allows you to achieve completeness and aesthetic appeal. In addition, such manipulations are used to save space.
The corners can serve as niches for built-in furniture or cut out completely for arranging seating areas.
The influence of the use of finishing corners in the apartment
Different corner finishes are accompanied by their respective goals. So, if there are small children or animals in the apartment, then the corners are processed for the purpose of additional protection. A sharp impact can deform the desired shape and spoil the interior.
Their use in this case protects the edge of the slope from damage and prevents the wallpaper from peeling off, which quite often happens at external corners.
Fans of unusual design prefer non-standard design of corners. It can be built-in furniture or arrangement of additional space. Various building materials can be used as finishes to influence the interior.
Great idea for saving space in the hallway.
Protect corners from damage
For protection, special protective corners are used. They differ from each other not only in the way of fastening, but also in the place of application.
In addition to the technical, the angular profile also carries an aesthetic load.
The range of such products includes the following variations.
- For visual differences. Protective corners come in different shapes and shades, which allows them to combine two functions at once: aesthetic and protective. So you can choose options to match the walls, doors, plinth. For a more unusual design, you can use different textures and catchy colors.
- According to the material used. A cheaper option is a plastic product. It happens in different colors, textures and even models with a transparent base. The metal options are more for protection than aesthetic appeal. To add a special touch to the room, you can use wooden options. In the construction markets there are corners made of different types of wood and with different surfaces.
- The form. According to this criterion, two types of products are distinguished: sharp and round. You can choose any shape of protective corners. The parameter does not affect the main function. It's more a matter of aesthetic appeal.
- Dimensions. You can choose completely different sizes. It all depends on the scale of the room and the walls in general. The largest option is considered to be a product with dimensions of 10mm x 10mm x 2.75 m. The minimum size is 5mm x 17mm x 2.5m.
The use of a white corner completes the window opening.
Visual impact on the interior
The use of corner finishing will achieve several goals at once:
- angle alignment for visual perception of a flat surface;
- performance of not only an aesthetic function, but also a protective one;
- reduction of pollution in hard-to-reach places of the ceiling and floor;
- wall decoration;
- saving space and installing additional furniture;
- improvement of doorways, window openings and joints between panels.
A profile that contrasts with the slope and wall decoration can create the desired color accent or become an independent original interior detail.
Depending on the material used, different decoration options can be achieved. Stone finishes will make any room unusual. Plastic materials will help achieve completeness and simplicity.
Silicone can perfectly complement children's rooms with their abundance of colors and high protective functions.
Designers prefer not to refine the corners, but to remove them. So, in place of the usual room walls, additional niches appear. They are a great help to save space, because other furniture and even household appliances are inserted there.
Such a “chip” in the interior can be used in bedrooms for bookshelves, in the corridor for shoes and in the kitchen for appliances.
Bold designers practice getting rid of corners. Instead, they equip an additional recess where you can place:
- interior items: vases, figurines, figurines made of ceramics or glass;
- relaxation space, where you can add a reading table or easy chairs;
- houses for pets;
- small home libraries or magazine shelves.
The corner of the room can be transformed into a practical rack for books and souvenirs.
Additional Information! In addition to the above, recesses can be used for other purposes. Fantasy knows no bounds and you can come up with any options for convenience and comfort in the apartment.
Materials for finishing corners in the apartment
Decorating corners in an apartment with decorative corners is not an easy process. In this case, due attention should be paid to the choice of material. The overall concept of the result depends on this.
Its appearance, technical characteristics and scope depend on the material of the corner.
Plastic panels
Such fittings are an inexpensive decorative material for finishing their polyvinyl chloride (PVC). The building material stands out for its resistance to alkali and acids. Light weight greatly simplifies the installation process. Also, PVC panels are not demanding to care for.
The palette of monochrome corners contains approximately 30 shades.
If cracks or deformations appear, parts can be easily replaced with new ones. At the same time, you will be pleased with the affordable price. A wide range of products will allow you to choose the right dimensions, shades and even shape. The key advantages include resistance to moisture and lightness.
If necessary, the white profile can be repainted in any other color.
Transparent silicone corners
An attractive and flexible material that has found its way into bathroom corners. High resistance to water allows the use of the product in a humid environment of the room. At the same time, the corners themselves are flexible, which allows them to be mounted even on uneven surfaces.
The main drawback is a weakness for household chemicals. Therefore, the process of caring for this protective product becomes more complicated. For cleaning it is necessary to use non-aggressive chemicals or an ordinary damp cloth.
This material is quite soft and is well suited for rooms where small children are often present, because. reduces the risk of a child being injured by hitting a corner.
Builders prefer transparent silicone corners due to ease of installation. The design is attached by removing the protective film that covers the sticky base. Installation does not require additional equipment or mixtures.
Decorative rock
This material will always remain a leader among other building materials in terms of aesthetic appeal. This option for finishing the corners in the apartment will help create a special atmosphere and emphasize the unusual design solution.
It is best to decorate the corners in the apartment with a flexible stone.
Such material is important to use the owners of large apartments. Since the decorative stone itself takes up a lot of space. In a small room, its installation is considered irrational.
Decorative stone in the corners will look very nice.
Key features include:
- strength;
- a choice of different textures and shades;
- there are smooth and rough surfaces;
- resistance to physical influences;
- the ability to translate into reality any design ideas.
The use of stone is appropriate in apartments with a large area.
Drywall
A versatile material that is widely used for finishing arches, shelves, ceilings, walls and any openings. The fragility of the material does not allow mounting for the purpose of decorating the room. During installation, you have to add an additional construction stage, which includes fixing the structure with putty or other mixtures.
Drywall is affordable and affordable.
Conclusion
Now it’s clear how to decorate the corners of the walls in the apartment. With the help of such a construction trick, fragile surfaces can be protected from damage. And also add an unusual "zest" to the concept of the interior of the apartment.
To complete the finish, a profile from any of the above materials can be used.
Finishing the corners in the apartment should be resorted to in cases where small children grow up in the family or animals are kept. Since stucco finishing mixtures do not have great strength, they are destroyed by light impact on them.
Especially often external corners are destroyed. Dents often appear on the corners pasted over with wallpaper, notches appear on the painted corners.
To protect the corners, the use of special devices and techniques that protect the corners from destruction is required.
We note right away that the process of finishing the corners in an apartment is a difficult and crucial stage. It is much easier to get a flat surface than to align the corners. Next, consider ways to protect the corners of the walls in the apartment and house from damage.
When do you need to trim corners?
Finishing the corners in the apartment is advisable in cases of installation in the corners of rectangular furniture. Aligning the corners eliminates distortions, allows you to harmoniously place rectangular furniture.
With large distortions, you should not resort to leveling the corners, since when leveling, the usable area of \u200b\u200bthe room decreases, but it is possible to beat it with a stone.
Which material is best for corner protection
In any room, corners are divided into internal and external.
And if it is difficult to get to the inner corners, then the outer corners suffer more often, and not only from the careless carrying of heavy household appliances or furniture.
Animals scratch the corners, and they often block the way for children.
For finishing corners, plastic, metal, polystyrene foam, wooden corners, special galvanized metal profiles, and decorative stone are most often used.
Plastic corners have an extensive range of colors. They have increased softness, varying degrees of roughness.
To the question: “How to finish the corners of the walls in the apartment?”, The article below will best answer.
Consider all the materials and fixtures used to protect the corners of the walls.
Materials mean the use of drywall, and as fixtures, the use of metal, wooden, polystyrene foam corners, PVC corners.
Aligning corners is one of the most difficult stages of finishing a room, requiring theoretical knowledge and extensive practical experience.
The protection of the corners of the walls is carried out by installing special devices. Corners made of different materials are most often used as protection for wall corners.
Most often, PVC corners are installed as corner protection.
Plastic corners should be installed after all finishing work has been completed.
Plastic corners are installed on the walls using a mounting adhesive for plastic products.
Plastic corners are produced with a length of 2.5 m. The width of the corners is different, from narrow to wide.
To choose the right corners in width, you should measure the curvature of the corner.
With large curvature, it is preferable to choose corners of greater width.
Narrow corners are used at almost flat corners
How to fix plastic corners on the corners of the walls?
Option 1
- 1. With the help of a construction angle, it is necessary to measure the deviations of the angle.
- 2. Knead the desired consistency of the solution from the dry putty mixture.
- 3. Apply the solution with an ordinary spatula, level it with an angled one, giving the corner a rectangular look.
- 4. After the corner has completely dried, attach a plastic perforated corner and close it with a finishing putty.
- 5.When the layer is completely dry, sand the surface with an abrasive mesh.
Option 2
The most common and inexpensive way is to use plastic corners of various sizes and colors. when choosing, pay attention to the correct angle, the fit to the wall depends on it.
Types and sizes of PVC corners - 1.Plastic corners are installed on a previously prepared surface. If necessary, remove the old wallpaper with a drywall knife, clean the surface of the old paint.
- 2. Apply glue to the inner surface of the corner in increments of 30 ... 50 mm. Glue is applied dotted.
- 3. When the adhesive reaches the desired viscosity (indicated in the instructions for the adhesive), attach the plastic corner to the corner to be protected and fix it on top with masking tape.
- 4. In place of liquid nails, it is possible to use colorless silicone.
These options for wall corner protection are also suitable when using metal profile corners.
If you want not only to protect the corners, but also to decorate the corners in the apartment, use wooden or polystyrene foam corners. 
Styrofoam corners
Expanded polystyrene is a non-combustible material.
Styrofoam corners do not absorb moisture, dirt does not stick to them. Polystyrene corners can be used in rooms with any temperature conditions.
The surface of polystyrene corners can be painted. The profile of the corners is created by pressing and is available in various shapes.
Finishing the outer corners in the apartment with the help of polystyrene foam corners is justified in those rooms where there is little traffic for residents.
Decorative corners made of expanded polystyrene allow not only to protect the corners, but also to perform a decorative design of the corners.
Fastening is possible both on special glue and on ordinary acrylic sealant.
Wooden corners
The main advantages of wooden corners are:
- attractive appearance;
- environmental friendliness;
- the possibility of creating a carving or decoration.
Wooden corners are an indispensable material for decorating corners in an apartment.
Not the best option to use wooden corners in rooms with high humidity;
Stone as a decorative element
Recently, the use of stone in interior decoration has become fashionable. The decorative design with stone looks especially organic when protecting external corners. 
The use of stone is especially appropriate when the outer corners have large deviations from the geometric shape. There is no need to level walls and corners.
Let's note right away! It is better to use a decorative stone. It is also lighter than natural. And having a smooth surface makes maintenance much easier.
The stone is fixed with a special mortar or tile adhesive.
Step 1
Before laying decorative stone, the surface should be prepared,
remove dirt, dust, old coatings and
If the surface is very dry, or you work at a temperature of +30C and above, it must be moistened.
This is necessary for better penetration of the adhesive into the depth of the prepared surface.
Step 2
Glue is diluted according to the attached instructions in quantities that you can use during work. Properties of glue remain within 2 hours.
Step 3
It is best to prepare glue in a plastic container using a drill with a mixer nozzle. After mixing, the adhesive is kept for several minutes and thoroughly mixed.
Step 4
On the back side of the stone, the solution is applied with a spatula, the edges of the tile are coated with the solution. Several mortar cakes are applied to the surface of the wall and a stone is applied.
Step 5
The stone is pressed against the surface with force, it is checked by a plumb line and the level of the correctness of its installation.
Step 6
After laying the stone in three rows, stop work. The adhesive is fully cured after two hours. This will allow you to continue laying the next 3 rows.
Failure to comply with the requirements of step 6 will lead to the collapse of the structure under its own weight.
Drywall for finishing corners
The use of plasterboard sheets GKL allows you to align any, the most crooked corners.
There are two ways to install drywall sheets: frameless, frame. 
Method 1
Frameless installation of drywall sheets is used on both internal and external corners:
- surface preparation is carried out;
- a drywall sheet is applied to the surface and marked;
- on the other side of the corner, a sheet is also applied and marked;
- blanks are cut with a knife and cuts are made with a planer at the mating corners of drywall;
- prepared blanks of drywall sheets are again applied to the corner and adjusted;
- mounting foam is applied to the sheets;
- both blanks are applied to the wall and pressed;
- sheets are removed, leaving traces of mounting foam on the wall;
- polyurethane foam is reapplied to the sheets;
- the foam should be allowed to dry a little and attach the sheets in place;
- it remains to correct the angle using a wooden rail or building level.
Method 2
The frame method is recommended for use in cases of significant surface curvature.
This method is more laborious, but it can significantly improve sound and heat insulation:
- it is necessary to measure the deviation of the angle;
- install the frame using galvanized metal profiles, securing them with dowels, self-tapping screws;
- a plasterboard sheet is installed on the frame and fastened with self-tapping screws;
- the resulting surface is puttied, polished;
- the corner is protected by a perforated mesh.
Conclusion:
- the proposed methods of finishing external corners can be combined not only in one apartment, but also in one room;
- the simplicity of finishing the corners with drywall requires additional costs;
- the most expensive material for protecting and designing corners is artificial stone;
- finishing the corners in the apartment with corners allows you to give the room not only a complete look, but also protect the corners from damage.
What types of decorative corners are there, methods of application, installation rules and examples of use in the interior.
Decorative wall corners
One of the most problematic areas in interior decoration are the outer corners.
It is quite difficult to paste over them with high quality, often the wallpaper rises at the corners, the corner is easily damaged by hitting a solid large object when moving furniture or carrying it.
Decorative corners help to solve these problems.
The corner protects the surface from mechanical damage, allows you to hide some flaws in the finish, arrange the transition from one material to another, close the ends of tiles or panels.
Where applicable
There are many options for using corners in the interior. They can be used to decorate both external and internal wall corners. Some difficulties arise when finishing corners other than 90 °, this requires special, so-called. folding corners. To finish the curved surface of the corner, flexible, “arched”, corner profiles are used.
The most common ways to use decorative corners:
- Adjacency of a window slope to a wall. It is extremely rare to see a slope, the near edge of which is not closed by a corner. Their use in this case protects the edge of the slope from damage and prevents the wallpaper from peeling off, which quite often happens at external corners. In addition to the technical, the angular profile also carries an aesthetic load. The use of a white corner completes the window opening. A profile that contrasts with the slope and wall decoration can create the desired color accent or become an independent original interior detail.
- Decoration of the doorway. Corners can also be used in the design of the doorway, when the thickness of the wall is greater than the width of the door frame. In that case, additional strips are installed to the door, the adjoining of the end of which to the wall is closed with a corner element matched to the color of the door.
- Protection of external corners of walls, columns, ledges. In this case, the corner protects the wall finish from mechanical damage, such as accidental impact with a heavy oversized object. It helps to preserve the finish and layers of putty and plaster. Also, the use of a corner profile simplifies the cleaning of the room. Often, handprints remain on the outer corners, which are easier to remove from plastic than from wallpaper. Properly selected contrasting corners allow you to avoid dullness and monotony of the interior.
- Formation of openings. In interior design, instead of doors, they often leave just an opening, for example, between the kitchen and the living room. The corners serve to decorate and protect the corners.
- External corners of walls tiled with tiles or wall panels. The ends of the tiles are closed with an angular profile, because. they differ in color from the front surface of the tile. If the tile is cut to size, and the cut edge is not sanded, it is easy to cut yourself on such an angle. When mounting the corner on the panel, they close the corner joint. The use of a special corner profile for these purposes is not always convenient, then decorative corners are used.
- Decorating and protecting the corners of gypsum board structures, such as racks or shelves.
- Decorating furniture, framing mirrors. In addition to decorative functions, it protects the edges from chipping.
Varieties according to the materials of manufacture
Corner profiles are made of various synthetic materials, MDF, wood, metal. Its appearance, technical characteristics and scope depend on the material of the corner.
metal
Made from aluminium, stainless steel, brass. Steel and brass products are polished and uncoated, while aluminum products are divided into polished, anodized and with a decorative coating, usually wood-like, but can also be painted in various colors. They are mainly used in the manufacture of furniture, less often in interior decoration. To protect the ends of the furniture boards, they are covered with a corner with different shelves, one of the shelves of which completely covers the end, the second goes slightly onto the plane. Unpainted profiles are suitable for framing mirrors and glass-covered pictures or posters.
Metal corners can be mounted on walls as a basis for a light false ceiling of the Armstrong type or PVC panels. Aluminum products are attached to the steps as anti-slip pads and edge protection from chips.
Wooden finishing
They are made from various types of wood, including valuable ones. Wooden corners are used to complete the decoration in rooms made of wood, for example, wall cladding with a block house or clapboard.
With their help, the ends of the boards are closed, both on the outer and inner corners. Also, these products are suitable for decorating painted or wallpapered walls. In this case, they need to be painted or varnished. Wooden corners can only be used at strictly right angles, because. they are fragile and with the slightest effort to bend or unbend them can crack.
Transparent silicone corners for wallpaper
If you need to protect the corner and keep the pattern of the wallpaper, stick a silicone corner profile. This material is quite soft and is well suited for rooms where small children are often present, because. reduces the risk of a child being injured by hitting a corner. The relative disadvantage of these products is that due to their transparency, they do not hide flaws in the finish.
Polyurethane
They are smooth, with a relief ornament and profiled. Smooth ones are similar to ordinary PVC corner profiles, differing from them in a larger shelf thickness. On the shelves often reproduce a three-dimensional ornament.
For use in classic interiors, polyurethane profiles of a complex section are produced that imitate gypsum stucco molding. On sale are white and painted in various colors, including imitating wood, you can also find painted in several colors, for example, a smooth part under a tree, and an ornament under gold. Due to the complex shape, they require great care in installation. Paints used in decoration fit well on polyurethane.
Plastic colored
Made from PVC. Visually imitate wood, metal surface or simply painted in one shade. The palette of monochrome corners contains approximately 30 shades. If necessary, in the desired shade, you can use special paints white profile. It is used everywhere in decoration, second only to white in popularity. For the design of arches and other curved surfaces, there is a special type of corners - flexible or arched.
MDF corners
They are 2 strips of MDF glued together with a film. The film is applied from the front side, the pattern repeats the pattern on MDF panels. Due to the fact that the shelves are movably fixed relative to each other, the same profile can be used on surfaces mated at different, internal and external, sharp, right and obtuse angles. Usually used when lining walls with MDF panels, but can also be used instead of any other type of corners.
MDF corners are undesirable to operate in rooms with high humidity.
Corner decor in an apartment: how to decorate a room with corners
The options for using decorative corners in the interior design of a room depend on many factors:
- surface material. A white plastic corner glued to the corner of walls lined with clapboard will look ridiculous.
- Finish colors. In no case should a red element be placed in a room designed in pastel colors.
- General stylistic solution of the interior. A polished stainless steel profile will not fit into a classic interior, a polyurethane, “stuccoed” profile, not suitable for high-tech style.
- Purpose of the premises. In the nursery, silicone corners are perfect. They will keep the corners intact and help protect the child from injury.
Design options for wallpaper
To complete the finish after wallpapering, a profile from any of the above materials can be used. The main criterion for choosing a corner will be its color. The choice of color can be approached in different ways. If the joining walls are of approximately the same shade, you can match the product to the color of the walls, if different - to the color of the wall that is more often looked at. For example, when finishing the corner between the room and the hallway, it is more logical to choose a profile to match the color of the room.
As one of the finishing options - decorating with a wooden corner, tinted in the color of the doors or the floor with the help of an impregnation stain and varnished. For the same purposes, products made of MDF and PVC, decorated under a tree, are suitable. When decorating a strict laconic interior, metal corners will look good.
The solution for the corners on the slopes: the better to close the corners in the apartment
To complete the finishing of the slopes, corners are used in the color of the slope, almost always white. Often, a sandwich panel serves as a material for slopes, therefore, so that the material does not differ much, PVC corner profiles are used. The width of the shelf is chosen such that it covers the end of the panel or plasterboard. If there are any defects in the finish near the window opening, for example, unevenly cut wallpaper, the corner is chosen so wide that these errors are closed.
The angle between the wall and the slope is usually more than 90 °, in order for the corner to lie flat, it should be slightly “unbent” - put on a flat surface or a pipe of large diameter and lightly press with your hands, moving along the corner.
In the cold season, the profile must warm up to room temperature before work.
Option for decor under the wallpaper
For walls pasted over with wallpaper, an option with wallpapering a corner may be suitable. For these purposes, profiles made of PVC, MDF, wood or smooth polyurethane are suitable. The profile should be of a light shade, because dark can come out from under the wallpaper. Wallpaper is glued on it, the glue is allowed to dry, then, not earlier than the next day, it is mounted on the wall. Wallpaper on the corner should be glued in one piece, of such a size that the wallpaper goes to the inside of the shelves.
How decorative corners are attached
For the installation of an angular profile, various adhesives are usually used; much less often, metal and wooden parts are mechanically fixed using self-tapping screws or nails.
What to glue plastic
For fixing PVC corners are used:
- "liquid Nails";
- acrylic sealant;
- silicone sealant.
When using sealants, the profiles must be fixed for 12 hours after gluing with masking tape. The best result is given by liquid nails, some brands of this glue do not require fixation for the drying time. As a rule, such glue must be applied to one of the surfaces, pressed on the second, then removed, allowed to dry, and then firmly pressed on the part to be glued.
For the installation of polyurethane products, you can also use liquid nails or special glue.
Finishing wooden corners in the apartment
The surface of wooden corners must be protected with varnish or paint. The varnish will allow you to preserve the texture of the wood, the paint applied in a thick layer will hide it. If you need to give the tree some shade, while maintaining the texture, you should use a wood stain or tinting impregnation for wood.
Fasten wooden elements with liquid nails, wood glue or PVA. It can also be attached to finishing nails.
When hammering a nail, the distance from the edge of the part to the nail should be more than 10 of its diameters.
How to stick a plastic corner on the wallpaper
The plastic corner is glued to the wallpaper using the same adhesives as to any other surfaces, i.e. liquid nails or sealants. It is important that the wallpaper at the place of installation is well glued to the wall, the wallpaper glue is dry. It is best to wait a few days after wallpapering and then decorate with corners.
How much dries
The drying time of the glue is indicated on the packaging, and rarely exceeds 12 hours. When sticking to silicone or acrylic sealant, it is desirable to keep the elements fixed for a day.
Decorative corners allow you to solve many tasks for decorating a room. They are inexpensive and relatively easy to assemble and dismantle, so it is quite possible to experiment if desired.
Useful video
Finishing the corners in the apartment has various options for its implementation. There are also two types of corners that can be finished. For this, a huge number of modern materials are currently used. How the facing of the corners is made, let's consider in more detail.
Varieties of corners in the room that can be finished
Ways to finish the corners are quite diverse. They are based on what kind of corner is made and what material the walls are decorated with (see Wall finishing options).
All corners in the room can be:
- Internal.
- outdoor.
Most often, decorative trim is performed on the outer corners, as they are most susceptible to rubbing. This is a kind of protection of the main finishing material from deformation along the edges of the finish. Internal corners in the decoration of the whole room and do not require special decoration.
Advice. It is necessary to decorate the internal corners in the room only if it is required by the design of the room from www.24siding.ru.
For example, completely two walls are treated with decorative plaster, and the inner corner is decorated with decorative stone or ceramic tiles. The photo shows examples of the design of internal corners according to interior design.
How can I arrange the outer corners in the room
_0.jpg)
How to finish the corners in the apartment? Everything is very simple for this today there are a large number of modern materials. You can use ready-made fixtures for this or make the facing of the corner surface yourself.
Finished fixtures are presented in the form:
- Plastic profiles with a straight corner radius.
- Plastic corners.
- Styrofoam or wooden corners.
All of them are quite easy to install and are able to decorate any finish.
Plastic profiles and corners for finishing external corners
Plastic profiles for finishing wall corners can be used both on external and internal structures. They are universal, as they are mounted on the surface of any finishing material.
Advice. For facing internal corners, profiles and corners should be used only if using plaster or other means it is not possible to make the corner perfectly even.
They are moisture resistant and are not able to react with deformation to temperature changes. They are very practical and reliable. Dirt and dust are not absorbed by their surface, due to which there is a quick and easy cleansing.
The dimensions and appearance of such devices are quite diverse. There are the following surfaces of corners and profiles:
- Smooth or rough.
- Glossy or matte.
More:
- The color range of the material is also quite large and it will not be difficult to choose the necessary shade for decorating the surface of the corners.
- The length of the profile or corner is at least 250 cm. The width starts from 1 cm and ends at 10 cm.
- They do not burn, but can only melt under the influence of a temperature of at least 150 degrees. They are used freely in damp rooms and where there are temperature differences.
They are considered environmentally friendly, since various harmful chemicals are not used in the production of profiles and corners.
Styrofoam corners
Very often, the decoration of the corners of the walls in the apartment is carried out with polystyrene foam corners. They are quite practical and durable. The surface of the material is represented by various reliefs. They are very light and will not put extra stress on the entire finish.
So:
- The material does not absorb moisture and dirt.
- Does not burn and can be used in any room with any temperature regime, as they are not afraid of temperature fluctuations.
- They are made of expanded polystyrene, by pressing under the influence of high temperatures. They have a wide range of colors.
- The main advantage of styrofoam corners is that they can be painted.
Advice. With a high passability of the room or with a very small square of it, such corners are not recommended for use in decoration, since they are not resistant to abrasion and deformation. With an inaccurate turn, the structure of the corner breaks quite quickly and simply, thereby spoiling the appearance of the corner.
Finishing the corners in the apartment with the corners of their polystyrene foam is simple and liquid nails are used for this.
Wooden corners for decoration
The method of decorating corners with the help of wooden structures is quite common in the wooden decoration of the room. There are both internal corners made of wood and external ones. They have a very attractive appearance. There may be carvings or other decoration on their surface.
Advice. Since such elements are sold ready-made and their surface is not varnished, it will definitely be necessary to paint it before installation. Such actions are also performed after the installation of the element, but only if the main decoration of the room is not completed.
The price for them is quite high. All this is due to the environmental friendliness of the material. They are very durable and reliable. The color scheme is limited only to shades of natural wood.
Note. To darken the shade of the material, special tools are used that not only change the color of the material, but also give it special strength and moisture resistance.
It is not recommended to use wooden corners in rooms where there is high humidity and sudden temperature changes. The structure of the tree is designed in such a way that it is able to absorb moisture and at the same time deform (cry out and shrink).
How to mount plastic, polystyrene and wooden decorative corners
All work is easily done by hand, and for this you will need to carry out preparatory work on the surface of the corner. They include leveling the corners even before the main finishing of the room.
This is done in two ways:
- The use of drywall.
- Application of plaster.
Let's take a closer look:
- To use the plaster on the corners there is an instruction. In this case, not only the main types of plaster are used, but also metal corners, which are pre-mounted on the surface of the corner and help to make the corner even. The process is quite lengthy and laborious.
- The use of drywall to level any surface is characterized by the speed of work. The material is used for both external and internal corners.
How to level corners with drywall
Finishing external corners with drywall is currently very popular.
There are two ways to mount such material on a surface:
- On the frame.
- Without him.
Advice. Finishing the outer corners of drywall should be done in the same way as the alignment of the walls in the room. That is, if the wireframe method is used, then the angle should also be using the wireframe. This will make the surface around the perimeter of the room in the same plane.
Carrying out work:
- If you opt for the frame method of fastening the material, then initially a crate is made using special metal profiles. It is fastened with dowels to ensure a secure fit.
- Sheets are mounted to the frame with self-tapping screws. The joints of the material are puttied with a small layer and processed after complete drying with sandpaper. Now on the drywall surface, you can perform a fine finish.
Advice. For such work, it is better to prime drywall sheets for a stronger bond between the finish and the surface.
- Drywall finishing of external corners without the use of a frame is considered simpler and more practical. For mounting sheets of material, a special glue is used. It is applied to the back side of the GLK, and the material is pressed tightly.
Advice. Before such work, the surface of the corner must be prepared: cleaned and primed.
- Joints of sheets or open cuts must also be puttied. The surface of such an angle is also primed.
- Drywall has one drawback - its surface does not have an attractive appearance and it is used only for rough finishing.
Advice. Be sure to veneer the plasterboard surface with another finishing material.
Methods for finishing drywall corners
Options for finishing the corners of plasterboard are quite diverse. Here you can use various modern finishing materials:
- Ceramic tile.
- Plastic panels.
- Natural or decorative stone and other materials.
Finishing the corners with ceramic tiles is done using:
- A tile cutter that cuts material very quickly.
- Building level, which ensures smooth installation of each finishing element.
- Special glue or concrete mortar.
- Ceramic corners, which serve as the basis for mounting tiles on the corners.
Execution of works:
- Decorative putty masks the seams of ceramic tile masonry. It is possible to use decorative corners on top of such a finish in case of uneven laying of tiles. They are attached to the surface of ceramic tiles with a sealant or a special adhesive. Most often, foam or polystyrene foam corners are used.
- Finishing the corners of PVC (plastic) panels is also quite simple. Only here you can use liquid nails, which are able to firmly fix any material on the surface.
The only thing to consider is that finishing the corners with PVC panels requires additional decoration, since plastic cuts will be visible on the surface of the corner. Small plastic corners are used for such masking. They are glued to PVC panels using special glue or liquid nails. Watch the video on how to decorate corners with decorative stone.