Shower faucet horizontal. How to install a bathroom faucet on the wall. Shower head and connecting hose design

a photo

RUB 8,090

Lemark Luna LM4115C single-lever bath faucet, with watering can and hose, chrome

Number of mounting holes - 1. Type of eyeliner - flexible. Stop valve - ceramic cartridge. With a watering can. Spout length 151 mm. Mixer type - single-handle. Appointment - for a bath/shower. Mounting method - horizontal. Coating - chrome. Case material - brass. The shape of the spout is traditional. With aerator. Spout height 52 mm. Connecting size - 1/2". Holder for shower head - wall holder. Dimensions 186x59x135 mm.

pickup possible

a photo

7 810 rub.

LEMARK Bath mixer Lemark Omega LM3115C

With spout length 144 mm. Type of eyeliner - flexible. Stop valve - ceramic cartridge. Mixer type - single-handle. Coating - chrome. With 1 mounting holes. Appointment - for a bath/shower. Mounting method - horizontal. Aerator. Case material - brass. The shape of the spout is traditional. Connecting size - 1/2". With spout height 97 mm. Watering can. Holder for shower head - wall holder. Width: 100 mm. Depth: 168 mm. Height: 158 mm.

pickup possible

Mixers are the main functional component of the crane system. In their absence, the correct supply of water to the washbasin, sink, bath or shower is simply impossible. It is this detail that makes it possible to comfortably operate hot and cold water supply systems at facilities for any purpose.

Do you want to buy a mixer in Moscow or with delivery to other regions of Russia? The online store site is ready to help and provide a large selection of models in various price categories!

We cooperate with responsible manufacturers and are confident in the quality of the products presented on our website. All products are accompanied by an official guarantee and are available for order at any time of the day.

Convenient order of plumbing in the store website

We do not limit the possibilities of our customers. For those who are interested in reliable and functional cranes, a full range of models for different purposes and operating conditions is presented. In order to buy a crane that fully meets individual wishes and needs, pay attention to:

• Appointment. Where exactly do you plan to use the product? In the bathroom or in the working area of ​​the kitchen? Are you looking for a hygienic option or would you like to order a model without a shower stall spout? Special search filters will help you choose the optimal type.
• Mounting method. Will the appliance be installed on the wall or on the side of the tub? Perhaps you are considering a mortise type with a hidden mounting system? All these models are already in stock and available in our online catalog.
• Control type. For some, classic mixing systems with two valves remain the best solution. Others opted for a modern single-lever faucet. Need more functionality? Especially for you, we have prepared current non-contact models and products with a thermostat.

Find out everything about the products you like by reading the detailed descriptions of the models, and make an objective decision!

Sooner or later, but there always comes a time when the owners of the apartment have to change plumbing that has served its time or, in their opinion, is morally and technically obsolete, does not meet the increased requirements for functionality or even external design. One of the questions that are most often asked at the same time is “which bathroom faucet with shower should I choose?”.

This question is not as simple as it might seem at first. It was not difficult with this business even 20 ÷ 25 years ago - you go to the store, and, if you are lucky, you buy what is there, and you are already satisfied with it! But the modern range of plumbing devices offered to the consumer can even be confusing - you can make the right choice only if you are at least a little versed in the device, classification, manufacturing materials and other issues.

And the appearance of the crane, which, of course, is very important, still should not become a decisive selection criterion. Practice shows that low-quality products of dubious manufacturers are most often given an appearance that attracts increased attention.

If a new mixer is installed in place of the dismantled one, then, of course, the choice of models at their location is not very wide. But in the case when it is planned to overhaul the interior of the bathroom with the laying of new engineering communications and the replacement of all plumbing equipment, the owners have “space” in terms of selection the most optimal sample.

1. Most common and the most commonly used option in the bathroom is a wall-mounted faucet with connection to pipes hidden by decorative trim. If the pipes are not planned to be “removed” into the wall, then the mixer can also be mounted to vertically located open risers for supplying cold and hot water.

• The "classic", the simplest type of connection - using ¾ inch union nuts using rubber (silicone) gaskets to horizontal nozzles. For precise centering of pipe and mixer axes and for changing from ½ to ¾ ʺ, usually, eccentrics are used.

In order not to leave the installation connection points visible, decorative caps are pre-wound on the thread of the eccentrics. Further installation - accurately set the center distance (shtikhmas) and carefully, without distortion, tighten the union nuts.

1 - protruding threaded part of the eccentric 3/4 ʺ.

3 – mixer union nut.

4 - sealing gasket.

In terms of ease of installation, such mixers have no equal, therefore, probably, they are the most widespread. In addition, models with a similar connection scheme are among the most inexpensive in price.

• If there is a desire to bring novelty to the interior of the bathroom, then you can also purchase a wall-mounted faucet, the connection points of which are completely hidden from view by the mono-case of the device itself. The principle of connection in this case does not change much, but the installation itself will require more effort, accuracy and ingenuity, the obligatory following of the instructions developed by the manufacturer. But these "troubles" are justified by the very original appearance of such devices.

• A rather expensive and difficult to install option, when only controls, a spout and a shower head with a hose are located on the wall, assembled according to the monoblock principle or spaced apart by separate elements on the surface.

Such mixers are a set of parts and assemblies designed for external installation and for installation in the thickness of a wall structure. A rigid or flexible connection is provided from the water pipes to the control unit and from it to the spout and shower. High-quality blocks of internal installation are protected by special cases that are not afraid of being embedded in mortars.

Such devices are very expensive, and in order to install them yourself, considerable experience is required in plumbing, general construction, and decorative and finishing works.

2. The next type of mixer installation is on the bath itself. Of course, we are talking about either bathrooms that have specially designed mounting platforms with holes, or acrylic or fiberglass, on which neat holes can be drilled for further installation. Several options are also possible here.

• One of the simplest options is to use one hole, and the mixer itself is very similar to its "brothers", which are installed in or on kitchen sinks.

The principle of installation and connection here also does not differ much from mixers installed on sinks.

• Another option is a kind of "retro style". Decorative pipes are installed in the mounting holes of the bathroom, supplying hot and cold water, and the faucet itself is connected directly to them.

Of course, the stand-pipes themselves are an integral part of the mixer set, they are made in the same style with it. Often they have very bizarre forms, emphasizing the unusualness of the ensemble being created. The connection to such mixers is carried out from below, under the bath, and most often flexible hoses are used for this.

• For modern style bathrooms, the faucet controls, spout and shower can be spaced horizontally on the edge of the tub.

The installation of such devices should also not cause any particular difficulties for the owner, who is familiar with the basics of plumbing technology. The kit is always accompanied by detailed instructions with an assembly drawing, such as, for example, as shown in the figure:

An example of connecting a four-position mixer with installation on a bathtub:

1 - a mixing unit with an adjustable single-lever cartridge-type tap.

2 - tap-switch of the flow "spout - shower".

3 - cascade type spout.

4 - shower head, which is located in a special glass (pos. 5).

6 and 7 - flexible piping from the water supply network.

8 and 9 - flexible connections connecting the main components of the mixer.

Flexible hoses 6 to 9 are usually not included, purchased separately depending on the installation. But these are the most common water hoses with ½ inch connectors. It is always possible to arrange the elements of the mixer on the bath in a convenient location at the right distance from one another.

10 - flexible hose with an adapter for connecting a shower hose.

11 - retractable shower hose passed through a glass (pos. 5). When not in use, it is hidden under the bathtub.

Installing such a mixer, subject to accuracy and using high-quality components, should not be difficult.

In some models, instead of a flexible connection between nodes, a rigid one is used. This will require the most accurate selection of the mixer for the existing holes in the bath, or increased accuracy when marking, if the nests for installation are drilled independently.

Another variation when installing the faucet on the bath - all controls are placed on one horizontal panel located on the side.

Due to the fact that such a design turns out to be quite massive, and the load falls on a localized area, very often such mixers have their own racks that rest against the floor. A window is cut out on the side of the bathtub, in which the mixer is mounted, on the acrylic or fiberglass wall itself, and at the same time it does not experience weight loads.

In addition, there is another possibility of installing the mixer - not on the bath itself, but close to it, from the end or side. At the same time, it will not be difficult to cover the structure itself with a decorative finish, for example, by mounting the box and lining it with ceramic tiles.

3. Following in line with the fashion trend to install a bath not in a “classic” place - near the wall, but in the center of the room (if there is enough space), the designers have developed special models of faucets that are installed on the floor.

This, of course, is a rather rare case of application in everyday practice. The cost of such models is high, they require special plumbing pipes hidden under the floor surface.

However, the demand for faucets of this layout is still stable, and the model ranges are represented by products in both retro style (for example, as shown in the picture above) and innovative, modernist execution.

The main types of mixers are considered. Now you should take a closer look at their components and accessories.

The difference between mixers by "controls"

Any bathtub/shower faucet involves mixing water from cold and hot pipes to the desired temperature, as well as the ability to switch already mixed flow onto a spout or shower head.

Adjustment of cold and hot water supply

Two valve flow mixing system

Once such a system was, in principle, the only one. And although more modern approaches to mixing streams have appeared, a similar scheme successfully competes with them. Moreover, it is she who is used in all mixers made in retro style.

"Classic of the genre" - mixer with two valves

The standard layout is two taps with handwheels located to the left and right of the spout. Each valve regulates its own flow - cold or hot water, and the mixing itself takes place already in a separate chamber of the plumbing fixture.

Such a scheme is distinguished by the simplicity of the device, it is easy to repair. Setting the water temperature is not difficult in itself, but the simultaneous regulation of both the flow rate and the degree of heating is rather difficult. However, for systems with autonomous instantaneous water heaters (for example, gas water heaters), it is recommended to use just such a scheme.

Bushing cranes are used as locking and adjusting mechanisms. With external similarity and with the same fitting thread for installation in a mixer, they can differ significantly.

Crane box with rubber gasket - stopper

Crane boxes with a rubber gasket that blocks the flow of water. The rotation of the flywheel through the worm gear is converted into the translational movement of the rod with a valve located at the end, on which there is a round rubber gasket. It may take several turns from full opening to closing.

The advantages of such a faucet are simplicity of design, the possibility of replacing the gasket, undemanding to the purity of the water. Among the shortcomings, there is a rather rapid wear of the seal, the resulting backlash in the mechanical transmission of rotation. There is another feature that will be felt at high temperatures - the imbalance of the set heating level. The fact is that the rubber disc changes linear dimensions, thickens and increases radially, with strong heating, thereby violating the set clearance for the passage of water. It is possible that during the washing process you will have to repeatedly adjust the temperature.

A completely different device and principle of operation for a crane box with a ceramic valve. The valve itself consists of two plates tightly ground to another with "windows" cut into them. The rotation of the plates relative to each other leads to a change in the area of ​​the lumen or to its complete closure. The operating cycle of such a crane can be limited to one revolution, half or even a quarter.

Such taps are very convenient, they allow you to accurately set the flow rate through them, which will not change with a temperature drop. The disadvantage is an increased sensitivity to water pollution - solid inclusions caught between the ceramic plates can very quickly lead to their wear and failure. If you decide to install such axle boxes, you should also think about a reliable filtration system. By the way, mechanical water purification will be useful for any type of faucet.

Replacing a failed axle box is a simple task for any owner. Their cost is also low - this largely determines the wide popularity of mixers of a similar scheme.

Find out which one to choose, as well as check out the varieties and installation, from our new article.

Single lever control scheme

Mixers equipped with one lever for simultaneous regulation of both flow rate and temperature are the most popular among consumers.

"One-handed" mixers are very popular nowadays

The lever moves in two planes, and the regulation and mixing of flows is carried out in a special cartridge.

This is what a replacement faucet cartridge usually looks like...

There are also two windowed ceramic plates inside the cartridge. The principle of operation is shown in the diagram below:

... and here is how it works

The cartridge lever is shown as a dotted line.

• On fragment “a”, the lever is lowered, and the plate associated with it completely blocks the flow of water from both hot and cold supply.
• When the lever is raised in the central position (fragment “b”), windows open for water access to the mixing chamber from both feeds, and the passage area is equal to the left and right. The lifting height of the lever will correspond to the width of the opening of the fluid channels, that is, the flow intensity is regulated in this way
• Moving the lever to the left or right (fragment "c") increases the free passage area for one of the feeds, respectively, reducing the opposite one, up to its complete closure. In this case, the total cross section of the water flow, in principle, does not change. This is how the outlet water temperature is controlled.

A slightly different scheme can also be used - the cartridge does not consist of ground-in plates, but is a hollow sphere with windows for water to enter it, moving relative to the supply holes.

A quality cartridge can last a long time. When choosing, you should pay attention to what the valve itself is made of. There are products not with ceramics, but with polymer plates, and, despite the assurances of manufacturers, their service life is much less. The cheapness of the product in this case does not justify the need for frequent replacement.

The control lever is not necessarily located in the center - there are many other design solutions

The layout of the mixer itself with one lever (joystick) can be very diverse. The developers offer models with both top, and front, and side levers, but the principle of operation does not change.

Mixers with built-in thermostat

If funds allow, then you can purchase a mixer, the water temperature in which is adjusted according to the thermostat scheme.

Usually on such devices there are two flywheels equipped with a locking system. On one side, the flywheel sets the exact temperature of the water at the outlet - for this, an appropriate scale is applied to it. On the other side of the mixer, a flow intensity regulator is structurally placed - it can be changed smoothly or stepwise in various models.

The advantages of this type of mixers are obvious:

• Complete safety is guaranteed for the recipient of water procedures. Even if there is very hot water in the water supply, in the boiler or at the outlet of the instantaneous heater, there is no risk of scalding - from from A shower or shower head will run water at a strictly adjusted, pre-set temperature.
• Water consumption becomes much more economical. The regulation device will produce the required pressure at the outlet, regardless of the pressure level in the pipes. In addition, such a mixer will also save in terms of energy consumption for heating water - only the right amount of it will always be spent.
• Many of the models are equipped with safety devices, clearly and responsive to possible changes at the inlet - pressure drops or even interruption of the supply.

There is only one drawback of such mixers - you need to be prepared to pay a fairly “round” amount for convenience.

The most modern are mixers equipped with electronics, which are responsible for the thermostatic regulation of the outgoing water, and for the pressure, and for switching operating modes.

Such models can be equipped with touch controls, liquid crystal display panels showing the settings and current system parameters. Of course, the cost of such devices is very impressive.

Spout-shower switching mechanism

If we do not take into account the most “fancy” models, in which the electronics “manage” the switching of modes, then the mixer must have one or another external control that has the task of redirecting the mixed flow of water from from pouring into the shower and back.

The switching mechanism itself (it is often called " divoter", the name " divertor" is found) can be of several types. Some of them are shown in the figure:

Schemes of the device of switches "spout - shower"

a - spool type switch. The rotation of the lever to switch modes is transmitted to the eccentric shaft. That, in turn, moves the spool rod to the extreme positions, on both sides of which there are plugs with rubber seals. Thus tightly overlapping one from the exits faucet - either a shower or a spout.

The advantages of such a mechanism are simplicity, reliability, it is easy to sort it out on your own, replace worn parts.

The disadvantage is the rather rapid wear of the rubber gaskets, after which unwanted water bypassing begins. In addition, there are cases of breakdown and jamming of the eccentric mechanism.

b - diver with a spherical valve. The ball connected with the flywheel axis is surrounded by polymeric gaskets tightly adjacent to it. There is a channel in the body of the ball, which, depending on the position of the switch, connects the outlet from the mixing chamber either with a shower or with a spout.

The system is very simple and reliable. There is simply nothing to break in it, and its service life is limited only by the gradual wear of plastic gaskets. But such divers are usually integrated into the hull, and in case of failure, as a rule, entail the replacement of the entire mixer.

c - cartridge type switch. The design is somewhat similar to the cartridge of a single-lever mixer - two ground-in ceramic plates with windows, the position of which determines the direction of the water flow.

Such switches are famous for their very light, smooth operation, duration of uptime use. The cartridge is located in the mixer body, and in case of signs of wear of the plates, it is easy to replace it with a new one.

Extremely widespread switches of the exhaust principle of operation.

Their body uses a poppet type valve, connected by a stem to an exhaust handle (button). By default, the valve, under the influence of a spring, is held in a position that interrupts the exit to the shower, leaving a free path for water to the spout.

If you pull the button, the valve will change position, shutting off the spout and opening the shower hose into the connection. The valve is held in this position by the pressure of the water. If the pressure decreases or stops completely, then the spring will return the valve plate to its original position, tearing off the outlet to the spout. It is very convenient from the point of view that if one of those who took water procedures forgot to switch the diver, then there is no risk of getting a “water charge” by the collar from a shower head hanging on the wall.

Often there is not enough pressure in the plumbing network to keep the switch in the “shower” position. Faucet developers provide for such an opportunity - the button can be fixed in an extended position by turning around the axis to the left or right by 90 degrees.

Such switches are simple in device, inexpensive, but it is often difficult to find a replacement or repair kit for a specific mixer model if the device is integrated into its body.

Based on what was said about the flow switches above, it is worth dwelling on one more of their features. Look at the picture below. It would seem that it has three almost identical mixers. However, they differ radically in the location of the diver.

a - the switch is integrated into the body from the mixer. Such a scheme is considered the most reliable, since leakage is practically excluded. Another advantage is the compactness of the entire device. The diver can be placed as shown in the figure, or it can be placed on a fixed spout, which, in principle, is structurally part of the body.

The disadvantage of such a scheme: if the switch fails, then the repair is very difficult (unless, of course, it's not a cartridge), and in some cases - and not possible at all. Thus, the failure of one unit can lead to the replacement of the entire mixer.

b - the switch is a separate block, which is placed between the mixer body and the movable spout. Advantages - high versatility, since the thread size usually fits most models of this type. The failure of the mechanism is just a minor nuisance, since acquiring a switch and replacing it in this arrangement is a couple of trifles.

The disadvantages are obvious. Firstly, an extra connecting node appears, that is, a vulnerable spot. Secondly, when using a shower, dynamic forces are transferred through the hose to this interface of the body, switch and spout, which leads to its loosening of the assembly and the appearance of leaks. And thirdly, the height of the entire mixer assembly is seriously increased, which can be very inconvenient. However, due to its high maintainability, the scheme has the widest popularity.

c - this option is most likely a tribute to "vintage", and not a rational approach. It will hardly be convenient to use a shower that is connected by a hose directly to a movable spout, and even so that the point of application of force forms a lever with respect to the gander's axis of rotation. And how long will the seals and threaded connections between the body and the spout last in this case? As is clear even from the figure, in case of any breakdown of such a switch, it will be necessary to look for a new spout. True, nothing will prevent the owner from switching to option "b".

Spout design

Long swivel spouts are still at the peak of popularity. They are convenient in that move location jet falling from it, especially in those cases when you need to draw water into a bucket, basin, or if washing and rinsing clothes is being done in the bathroom.

Once upon a time, during mass urban housing construction, a typical layout was a scheme in which it was located at the end of the bath, somewhat rising above the edge and blocking it. This is where the design of faucets with a long curved spout came from, which could be rotated either for use in the bath or for washing.

Today, most owners prefer to put separate devices at each draw-off point, but, nevertheless, this design shows an enviable survivability.

When choosing such a mixer, it is necessary to take into account the length of the spout, the sector of its rotation. The rotating knot is always a weak point, so you should pay special attention to its quality.

Faucets with a fixed short spout, which is essentially a continuation of the body, are deprived of such shortcomings. Yes, the jet is always directed to the same point, but this is quite enough for taking a bath. But the device itself is much more compact, lighter, more reliable in operation.

Faucets with a short fixed spout are more reliable

Design execution of fixed spouts can be very different - from retro style to the most unusual modern forms.

A completely separate niche is occupied by spouts the so-called "cascading" type. Water flows out of them like a beautiful waterfall. At the same time, its consumption is much higher than when using conventional spouts.

It certainly looks very original. And how to evaluate the practicality of such a spout from the point of view of everyday use is, of course, a moot point.

Shower head and connecting hose design

Undoubtedly, the most important elements of the entire bathroom faucet set are the shower and the hose or pipe leading to it. Let's take a closer look at these accessories.

The simplest option is watering cans, which simply break the water stream into many thin jets, and do not have any other functions. It is interesting that such souls are becoming less and less common - they are gradually being replaced by more modern multifunctional models.

Nevertheless, for many such a simple design is quite enough. And the designers of manufacturing companies, for the sake of consumers, produce ordinary watering cans in a wide variety of designs.

However, a discerning buyer will often prefer to choose a shower head with switching modes. In the simplest models of this type, there are two or three modes, for example, normal, soft with flow aeration, and hard massage jets.

Models are also produced with a significantly larger number of available modes - the only question is how often they will be used in practice.

The material for the manufacture of watering cans is plastic or metal. Polymer watering cans are cheaper, but the quality is lower, they can crack if handled carelessly. On the other hand, it will not be a pity to replace them from time to time. Metal watering cans are more durable, but also heavier, and if accidentally dropped on the enameled surface of the bath, they can damage it.

The most important attribute is the hose that connects the watering can to the mixer ( divoter).

The usual inexpensive hoses in a spiral metal sheath with a rubber or plastic tube inside are extremely short-lived. From constant use, the braid begins to diverge, frays the cabin with sharp edges, and the hose can be safely thrown away. Another disadvantage of the metal braid is that it acts abrasively on the bath - acrylic models especially suffer from this.

Such hoses are gradually being replaced by silicone ones, which can have a metallized, nylon, foil inner or outer reinforcing braid. Such hoses last a very long time, look very attractive, do not require special care - unlike metal, they do not leave traces of limescale. And if you really want to have a metallized surface, then it’s better to choose a herringbone silicone hose sheath - it looks beautiful, and it won’t be demolished.

The length of the hose is very important. The choice should be made based on the actual size of the bath, the height of the people who will take water procedures. However, too long hoses will also become an inconvenience. It is optimally considered - about 1.5 ÷ 1.6 meters.

As a rule, all hoses are fully standardized in terms of threaded connections to both the faucet and the shower head, so it will not be difficult to replace in case of wear. By the way, the connection nodes are perhaps the most vulnerable places, as they are constantly subjected to twisting stress (this is especially true for the “hose-watering can” node). To avoid a quick breakdown, it is worth looking for a modern model of a hose in which a swivel is installed - a plastic plain bearing that allows the shower head to rotate 360 ​​° relative to the connecting fitting without any damage.

The optimal solution is a hose with a slide bearing at the junction with the shower head

It is worth paying attention when choosing the convenience of a bracket for a shower head. On some faucet models, it is located directly on the body, on others it is included in the wall mounting kit. Often, special racks are offered that allow you to install the shower at the right height, while simultaneously adjusting its angle of inclination for comfortable taking procedures.

Such racks can to be included in the set of bath accessories, or to be purchased separately.

Read the article, as well as how not to get confused in their diversity.

Faucet models that combine both a shower on a flexible hose and a stationary sprinkler stand somewhat apart.

It is very convenient - you can always arrange a “tropical shower” mode for yourself. In such models, an additional switch is provided that redirects the flow either to a flexible hose or to a stationary pipe mounted on the wall.

Faucet material and outer coating

Whatever model was the mixer itself, the material of its manufacture is of paramount importance. Alas, in this matter, many are promiscuous, for which sometimes you have to pay with the purchase of a new device.

• Silumin - an alloy of aluminum and silicon additives, has only one advantage - low cost. Although it seems to be a metal, it is extremely porous and fragile. Some details from silumin can be easily broken with the force of the fingers. In addition, silumin is not protected from oxygen corrosion, and its fragility and brittleness are constantly increasing.

At the same time, such mixers are actively and quite successfully “made up” for quality products, especially by the manufacturers of our “great eastern neighbor”. But no matter how beautiful the device may look, immediately refuse to buy a silumin mixer - it will not serve for a long time.

• Stainless steel products show themselves well in everyday practice. As a rule, all of them have a high-quality chrome plating. There is only one drawback - the excessive massiveness of the mixer.
• The best metals for any plumbing products are copper alloys. Brass or bronze faucets are not subject to corrosion, withstand the most severe thermal and mechanical loads, and do not have any negative chemical effect on water. And by longevity they have no competitors at all. Naturally, all this will be fair if really high-quality metal is used.
• Ceramic materials can be used for the manufacture of individual mixer assemblies. It looks very cool, especially if the bathroom is decorated in retro style. However, it should be remembered that ceramics are afraid of impacts, and they should be handled with extreme care to prevent surface chips or cracks.

• There are mixers in which a large number of external parts of the body are made of high-strength ABS plastic. As a rule, these are modern models with thermostatic regulation. In the "classic" versions of mixers, leading manufacturers do not use polymers for the manufacture of bodies.

So, it is best to purchase a mixer made of brass or bronze.

Hiding the noble color of bronze is simply unwise

• Bronze is usually not "hidden" behind any external coating - its noble color in itself is an adornment of the mixer. It can have a mirror finish, imitating even gold, or be matte, covered with patina.
• Brass faucets are usually covered with a decorative coating. It can be chrome-nickel plating - from mirror-shiny to matte, pure silver or with interesting tint filling for various types of metals.

• For lovers of a non-standard approach to bathroom interior design, models with a highly resistant, durable polymeric colored enamel coating are offered.

• Bathtubs made of their composites imitating natural stone - granite, marble, etc. are popular. You can also match them with a faucet that has a similar external design.

Faucets with composite coating "under the stone"

In a word, and in terms of the external design of the mixers, the choice is quite wide. But even if some model really liked, you should not immediately purchase it recklessly - you need to take into account some more recommendations.

Useful tips for choosing a bathroom faucet

• First of all, if such an opportunity is given, you should purchase products of well-known brands.

Mixers of the German companies Grohe usually do not cause any questions about the quality of workmanship. , Hansa, Hansgrohe, Danish Damixa, Italian Mamoli and Carlo Frattini Visentin, Russian Aquatica, French Herbeau and Jacob Delafon, Swedish Gustavsberg, Finnish Oras, Spanish "Teka", American "Ideal Standard" and "Supergrif", Swiss " Geberit»

If the name of the manufacturer does not mean anything, then it would be reasonable to give a search query on the Internet, and then carefully read the company's website, or even better, read real, and not far-fetched product reviews on the forums.

But if suddenly the name is clearly “disguised” as a well-known brand, for example, you come across a Teko, Herbean, Mammoli or Grehe mixer, you should immediately say a resolute “no”. And do not listen to the seller's assurances that these products are produced under license - no self-respecting manufacturer will allow his name to be distorted. This is an absolute fake. no matter how shiny and beautiful she looks.

• Never buy such plumbing from your hands, from random sellers in the market - with a very high degree of probability you will run into low-quality counterfeit goods.
• In any normal salon, they are required to present documents confirming the authenticity of the product, put a mark on the date of sale, from which the warranty period will begin to count. This should not be neglected - the mixer can be quite expensive, and leading manufacturers give good guarantees for several years. He always pays special attention to issues of quality and his own reputation, therefore, if the device fails, you can count on a replacement according to a complaint or compensation for losses.
• Be sure to check the completeness of the delivery - everything must exactly match the product passport.

You can find out and also study the nuances from our new article.

We hope that the information provided in the article has given the reader sufficient information on choosing a bathroom faucet. Choose from the catalogs a model that matches your tastes, desired functionality, bathroom design style and personal financial capabilities, and go to the salon for a purchase.

Video: how to choose a bathroom faucet?

Mixer taps are used much more often than other plumbing fixtures installed in the kitchen or bathroom, so the materials from which they are made are of great importance. Metal, including brass, models are more resistant to high operational loads, so it is better to choose a mixer for an apartment in this design.

Mixer design options

Regardless of the installation location, be it a bath, shower, sink or bidet, faucets can be single-lever, double-lever, two-valve or touch. Single-lever are most convenient for frequent use. When choosing a double-lever mixer tap, pay attention to the fact that hot and cold water is supplied through different taps. Two-valve ones are more suitable for installation in the bathroom, as they will “work” there much less often than in the kitchen. Touch devices are hygienic: they turn on automatically, without touching. Such plumbing is optimal for large families and is often used in public restrooms.

In the online store "Eldorado" you can inexpensively buy a mixer of any type. Our catalog contains discounted products and new items from famous brands. The faucet ordered on the site can be picked up at retail outlets, chain stores and online hypermarkets or received with home delivery.

Use the Yudu website to order a horizontal faucet installation. Our specialists will carry out high-quality horizontal installation at a low price.

Installation Features

Horizontal installation of the mixer differs significantly from the vertical, more traditional installation. In this case, the mixer is installed on the side of the bathtub or sink. This installation of the mixer has a lot of subtleties, so you should call an experienced plumber.

Our masters guarantee you:

• high quality
• accuracy
• professionalism

For this type of installation, you need a bathtub, the side of which will exactly withstand the mixer. You can check this feature of the bath with the manufacturer.

You can order the services of plumbers at any convenient time.

Checkout

On our site you will find the following advantages:

• convenient way to order
• rating systems
• affordable cost of services
• checking plumbers

To order a horizontal installation of the mixer, place an order by phone or on the website. Specify the details of the order and requirements for the master.

Browse the catalog on the site, compare the profiles of the masters. Choose the best performer using the rating system.