DIY mousetrap - instructions for homemade traps. Do-it-yourself mousetraps: from a plastic bottle, jar or bucket of water Do-it-yourself mousetrap cage

Kirill Sysoev

Calloused hands do not know boredom!

Content

Small animals become a disaster for owners of gardens and cottages, and often residents of private houses suffer from their invasion. Spoiled crops and products are not the main problem. Rodents as carriers of serious diseases can infect humans with them. It is not difficult to make homemade mousetraps from improvised materials.

DIY mousetrap - advantages

It is easy to buy a device for catching mice, only a factory mechanism with a metal spring is not humane, especially if a child sees the bloody result of the work. The disadvantage of such a mousetrap and the high cost. Poisoning rodents with chemicals is dangerous if there are other animals at home. In such a situation, it is more convenient to make a trap for mice with your own hands.

Homemade designs are much cheaper. They are made from any materials that every home has and it is not a pity to throw it away, which saves money. Advantages of a do-it-yourself mousetrap:

ease of execution;
the design does not deprive the mouse of life, but limits freedom;
does not take much time to manufacture;
mice are not familiar with the new device, do not know how to avoid danger;
in the event of a breakdown, another trap is quickly made;
safety for children and pets;
work allows you to demonstrate your skills to loved ones.

Types of mousetraps

You can make reusable homemade mousetraps with your own hands, which are constructed from a glass jar, plastic bottles. The animal will remain alive, the mouse can be released into the street or into the forest, the trap can be used again. Disposable mousetraps are made from a glass bottle with a wide neck, where the animal enters and cannot get out. To release the mouse, the trap must be broken.

You can make different types of mousetraps with your hands:

using plastic bottles;
a design of a bucket of water where the mouse can fall;
cardboard trap with specially applied sticky glue for rodents;
mousetrap from a bottle or glass jar;
a slamming design of a pan, a vessel of a suitable volume;
wooden or metal device;
a mousetrap-chasm, where the animal falls from a height into a bucket;
electronic trap.

How the mousetrap works

Do-it-yourself traps for rodents have different device schemes. How does a mousetrap work? The action of the trap is based on the principle:

displacement of the center of gravity - a bucket of water;
slamming - a glass jar, a box of cake;
spring actuation - wooden construction;
sticking to a lubricated surface;
changes in circuit resistance - electronic mousetrap;
inability to get out of a high capacity - a jar with a paper lid;
stuck in a plastic bottle with sharp petals.

Mouse bait in a mousetrap

You can lure the animal into a do-it-yourself trap by putting a bait in a mousetrap. There is a persistent misconception that mice love cheese. Numerous experiences have led to the conclusion that this product is not considered their priority. It should be noted that rodents love fresh and high-quality food, they will pass by a mousetrap if they doubt that the products are harmless. It is necessary to lubricate the device with oil or alcohol to beat off the smell of a person.

It is preferable to choose products with a strong aroma, soak them in sunflower or sesame oil. The best bait for mice in a mousetrap:

smoked or salted bacon - can be fried on a match;
sunflower oil, preferably unrefined;
a piece of fragrant bread, preferably fresh;
sunflower seeds;
slices of pizza;
seeds of buckwheat, wheat, rice;
smoked sausage;
nuts;
fresh or boiled meat.

How to make a mousetrap

To make a trap for mice with your own hands, you must first decide on the design, select the necessary materials. You can make a mousetrap using:

unnecessary bucket or container;
plastic bottle;
glass jar;
plastic and paper;
a cake box with cotton swabs and soap for cargo;
wooden bars;
cell and electronic circuit.

DIY mousetrap from a plastic bottle

Craftsmen work wonders from this household item. The mousetrap from a plastic bottle was no exception, which is easy to make with your own hands. The mouse, getting there, cannot get out, it will stay there until it is thrown out. One of the manufacturing options:

take a bottle;
separate half from it;
on the part where the bottom is, make cuts with scissors about 2 cm long, equal to 1/2 of the diameter of the circle;
sharpen each petal;
bend inside the bottle;
put bait on the bottom;
the mouse will go inside, and the sharp teeth of the petals will prevent it from coming out.

A do-it-yourself mousetrap from a plastic bottle is performed in another way according to the following step-by-step instructions:

cut the container in half;
shorten the neck so that the mouse can easily pass through it;
lubricate the inside with oil;
put bait on the bottom;
insert the upper part inside the lower neck down;
the mouse rushes for food, falls into the bottle, but cannot get out.

There is another effective option for quick do-it-yourself manufacturing - a mousetrap that works without misfires:

cut off the end of the bottle at the narrowing point;
make a hole, tie a rope to it;
lay the bait inside;
place the bottle on the edge of the table surface - most should hang down;
tie the free end of the rope or glue it with adhesive tape so that at the moment of falling the container does not reach the floor;
the mouse, penetrating inside, moves the center of gravity;
the bottle hangs with the rodent.

Mousetrap from a bucket of water

An old bucket can be used as a mouse trap. To implement the idea, you need:

drill 2 holes on top;
pass a metal rod horizontally through them;
put on it an empty bottle with a lid, lubricated with oil - the container should rotate freely around the axis;
move the neck of the container to the edge of the bucket;
the mouse, smelling the smell, will climb to the bottle;
it will turn, and the animal will fall into the water.

You can consider another option for using a bucket for making traps with your own hands, liquid is poured into a third of the volume. A mousetrap from a bucket of water is done like this:

on top of the container, not far from the edge, a knitting needle is horizontally fastened with insulating tape;
a ruler or rail is glued to it at an angle of 90 degrees, which at one end rests on the edge of the bucket, and the other hangs freely;
bait is placed on it;
a bar is placed on the side of the bucket at an angle;
the mouse climbs on it to the bait;
the free end of the ruler overturns under the weight;
the trap works.

A very easy to make do-it-yourself disposable mousetrap, made from a house-shaped calendar. In this situation, the bucket is placed on the floor near the edge of the table. The mousetrap is made according to the principle of shifting the center of gravity:

the calendar is installed on the plane of the tabletop so that the edge extends halfway beyond the end;
delicious food is placed at the far end;
the mouse goes to the bait;
the house topples with her into the bucket.

Wooden do-it-yourself mousetrap

For those who are unable to regularly come to the country to check if someone is trapped or not, you can make a multi-seat structure. In this case, a do-it-yourself mousetrap made of wood is performed immediately to catch several rodents, for example, six. For manufacturing you will need:

wooden block 4x10 cm, 40 cm long;
bicycle knitting needles - 6 pieces;
thin wire;
strong thread.

The process of building a mousetrap is as follows:

at the end of the bar, drill holes with a diameter of 2 cm and a depth of 1 cm - these are minks;
step back from the edge on the same side 10 mm;
make a longitudinal cut to the bottom of the holes;
shift the line from it by 2 cm;
drill two holes with a diameter of 2 mm perpendicular to the mink;
use the same drill to perform another one on the same plane, closer to the other edge;
roll the spring from the knitting needle;
fasten a loop of wire at the end.

Collect a mousetrap with the following sequence:

insert the free end of the spring into the hole on the plane;
hide the loop in the cut to match the contour of the mink;
pass the thread through 2 small holes, fix the spring;
put the bait deep into the mink;
the mouse, wanting to have a tidbit, gnaws the threads;
the spring works, only the tail sticks out of the mink, which does not frighten other animals that fall into neighboring holes.

Mousetrap from a jar

A very simple option for making a do-it-yourself trap from a glass jar, which must first be rinsed well. For the production of a mousetrap:

make a paper cover on top;
fix with masking tape or twine;
make two perpendicular cuts with a sharp knife;
the bait is hung over the jar;
the mouse will want to eat it, stand on the paper and fall through.

A mousetrap from a can can be made in another way, which requires a coin. An important condition is that a large diameter is needed, for example, 5 rubles. For the convenience of subsequent removal of the mouse, the entire structure must be placed on a base - a sheet of cardboard. The mousetrap is done like this:

a piece of bacon is attached to double-sided tape;
fixed on the back wall from the inside;
the opposite end rises;
under it, as a support, a coin is placed on the edge;
the mouse, trying to eat the bait, touches the jar;
the coin falls, the mousetrap slams shut;
the animal cannot get out.

DIY electronic mousetrap

For those who understand electronics, it will not be difficult to make a mousetrap according to the scheme shown in the photo. The design consists of a cage, on one side of which a slide gate is installed on vertical skids. On the device at the top, near the entrance, there is an electromagnet, in which the anchor is spring-loaded towards the gate, and the tip is pointed. 2 holes are drilled on the damper opposite the anchor;

when the gate is fully raised, the tip falls into the lower hole;
when lowered, due to the spring, it enters the upper one.

A do-it-yourself electronic mousetrap can be made by a keen person. A pointed electrode is provided in the far corner of the structure. Delicious bait is planted on it. The electrode and magnet are connected to the electronic circuit. The mousetrap works like this:

the gate rises to the upper position, where it is automatically fixed by a spring;
the mouse enters the cage;
hits the bait.

when you touch the mouse to the bait, the resistance in the circuit quickly changes;
an electromagnet is connected to a storage capacitor;
the gate is lowered, closing the entrance;
the anchor of the electromagnet fixes the damper at the bottom;
an audible alarm is turned on, warning the owner of the appearance of an unexpected guest in the cage.

For mice to live, a person in the house has all the favorable conditions: it is warm, there are many secret places and there is always some kind of food. And it doesn't matter where you live - in the private sector or on the eighth floor of a high-rise building. This rodent can go anywhere. People have been concerned about protecting their home for a long time, and during this time many clever traps have been invented. One of the most effective and simple is the trap.

There are many of them on sale today, differing in design and method of fishing. But why spend money on them when a do-it-yourself rat trap is made literally in a matter of minutes and from ordinary improvised means. In addition to saving money, you will have a great opportunity to show your crafty skills to your loved ones, but only if you know how to make your own mouse trap.

When small children live in the house or there are pets, the use of poisonous substances to kill rodents is not desirable. Buying factory traps in the store can be quite expensive, and for a good result, you need to install several of them at once. And in this case, knowledge on how to make a mousetrap with your own hands at home will come in handy.

Making our own options

To create traps, you can use materials that are always in the house - paper, plastic bottles, other containers, a ruler, wire, and more. The main thing is that such homemade mousetraps are reusable, and some options are self-loading. You don’t have to constantly monitor them and you can catch several rodents with the help of one device.

More effective will be sunflower seeds, toasted sunflower oil or a piece of bread dipped in it.

However, it is not enough to know how to make a mousetrap at home, you still need to get pests interested in it, you need to be aware of what to put inside. For this you need an attractive bait.

Everyone knows mice love cheese, but that's a faster stereotype. No less effective are:

Sunflower seeds
Slices of bread fried in sunflower oil
Small pieces of fat.

Sesame oil is also a good bait for rats and mice, and is considered a win-win option, its aroma does not leave rodents indifferent.

A simple option from a bucket and a ruler

This is not only a simple solution to the problem, but also quite easy to implement. In addition, such a do-it-yourself mousetrap has a great advantage - all its elements are interchangeable. The bucket can be replaced with an old pan or other container, and instead of a ruler, use thick cardboard or a thin rail.

The design of such a mousetrap is unpretentious; to create it, you still need a knitting needle or a metal round and rigid wire. The spoke rests with its ends on the edge of the bucket. The ruler attached to it rests at one end on the edge, and the other should hang over the container. The bait is placed on it, closer to the end.

Such do-it-yourself traps for mice and rats will be effective provided the rodents have free access to the ruler located on top of the bucket. It is advisable to fill the container by a third with water. The mouse, passing along the rail, crossing the place of its intersection with the spoke, shifts the center of gravity of the structure you created.

The free end of the ruler drops sharply down and the animal falls into a makeshift mousetrap. If the bait is securely fixed and does not fall off when it rolls over, then this design can work many times.

From a jar with cut paper at the neck

This model is similar to the previous one. Only the bait should be put in a mousetrap, and for rodents to make a path to the neck of the jar. From above it is tightened with paper, cut crosswise with a razor. Stepping on paper petals, the animal falls into the trap.

Such a mousetrap from a can is not always effective, as animals are sometimes afraid of thin paper vibrating under their paws. In this design, the bait can be placed not inside the tank, but hung on a string above it.

We make from a glass jar and a coin

Such homemade mousetraps can also be made from a small saucepan, and a large button is also suitable instead of a coin. It will serve as a support for the raised edge of the container. A string or strong thread is glued to it, at the end of which a hook is tied. A wooden or metal rod is placed inside the can. A cord with a hook is thrown through it, on which the bait is put on.

In a simple version, the bait can be glued to the wall of the jar.

When the mouse pulls the food, the thread stretches and pulls the support out from under the jar. The trap closes, and the captured rodent is trapped. The disadvantage of the trap is the need to recharge.

Plastic bottle traps

There are many options for manufacturing models of this type. A do-it-yourself mousetrap from an ordinary plastic bottle is very simple:

The container is cut into two uneven parts, the bottom should be longer. A part with a neck without a stopper is installed in another in an inverted position. For structural strength, the mousetrap from the bottle is glued together.

The bait is inside the container. It is also good to grease the neck with oil. A small animal slips into a bottle and can no longer get out.

A humane DIY mousetrap can be even simpler. The neck of a plastic bottle is cut off, the bait is placed inside. The container is installed in such a way that most of it hangs over the edge of the table or shelf.

A do-it-yourself mousetrap from a plastic bottle is tied with twine to something above the table. The animal, getting inside, shifts the center of gravity, and the trap falls, sagging above the floor. With a little ingenuity, you can come up with other models of a mousetrap from plastic bottles.

Interesting video:Mousetrap from improvised means

Mice are the oldest neighbors of mankind. Rodents are to blame for many epidemics, as they are able to carry deadly diseases. Modern medicine has gone far ahead, but some ailments can still seriously harm a person. The appearance of mice in the house is a real misfortune. Pests must be dealt with immediately.

It is not necessary to kill the rodent, there are many humane ways to help catch the pest, release it at a safe distance from your home. At home, you can make tricky traps. They are safe for pets, small children, but are highly effective.

Causes of mice in the house

Despite their outer shell, mice are quite intelligent animals. They penetrate small cracks, run through sewer, ventilation pipes, and are able to run into an open window or door. Some individuals easily bypass intricate traps, sometimes survive after persecution, even develop immunity to commonly used poisons. To successfully catch gray pests, stock up on ingenuity and patience.

The human dwelling includes several important aspects necessary for the reproduction and normal functioning of pests:

It is very simple to suspect the presence of mice in the house, it is enough to notice some aspects:

gnawed bags of cereals;
the presence of rodent feces on the floor, near the accumulation of food;
bad smell;
at night, the appearance of rustles, noise, squeak is noted. During the day, rodents hide in secluded places, so their presence is hardly noticeable.

Finding roommates deal with them immediately. To do this, use time-tested traps, folk remedies. It is not necessary to spend money on expensive poisons that can adversely affect human health, pets, even indoor plants.

Harm caused by gray rodents

Rodent danger:

Homemade traps: how to make and use

This opinion is absolutely wrong. Rodents prefer pieces of sausage, bread, grain, which is watered with sunflower oil. Seeds are very popular among gray pests; you will definitely catch a big “catch” for this product. Modern mousetraps are compact, lightweight, but have a significant drawback - the mouse suffers before death, which is not very humane. Also, the trap is designed for only one animal, it will not work to catch another individual.

Note! Homemade mouse traps are absolutely safe, the captured animal can be released, the product can be used many times. In addition, traps made at home are made from improvised materials, you do not need to spend money on their production.

Catching a rodent with a can

Use cases:

option number 1. You will need a bucket or any other large container, a plastic bottle (0.5), a wooden stick, bait. Insert a stick into the bottle so that it pierces the bottom and neck of the product. Place the bottle in such a way that the ends of the stick are fixed on the edges of the bucket. Put the bait on top of the bottle. The mouse will try to eat it, stepping on the bottle, it will scroll, the rodent will remain in the bucket;
method number 2. Place a bucket under a stool, put a piece of light wood in the form of a strip on it. Put the product in the form of a springboard, put a tidbit on the edge above the bucket. The wooden plate will not be able to support the weight of the bait and the rodent, it will fall down into the bucket, and the rodent itself will be trapped along with it.

Glue against pests

Hardware stores sell special types of glue designed to catch rodents. Spread the product on a flat surface, the mouse will get stuck in it during the examination of the glue, it will no longer be able to get out. The glue trap for mice is not suitable if there are small children or pets in the house.

Plastic bottle

Effective recipes for folk remedies for cockroaches in the apartment are described on the page.

Go to the address and learn about how to deal with midges in the kitchen.

Helpful Hints:

store all cereals, sugar in a glass container with a tight-fitting lid. Regularly inspect your supplies, the presence of strange objects, small lumps of black is a sure sign of the presence of living creatures in the house;
Remove plastic bags from the kitchen. All food stored in them is potential food for rodents;
put several cloves of garlic, bay leaf or onion peel into kitchen cabinets. Specific aromas will repel mice;
garbage cans should be placed as far as possible from the residential building. Empty the trash can regularly;
hang a birdhouse near the house, attract birds of prey with crumbs. For example, one barn owl is able to catch up to seven rodents per night;
wash all surfaces with a solution of water and chlorine (take a tablespoon of powder per liter of liquid). A strong aroma will scare away uninvited guests;
mice do not like space and lack of trash. Maintain cleanliness and order in the apartment, private house, eliminate all secluded places. So you make your home unsuitable for rodents.

Mice are smart animals, able to multiply quickly and harm a person. Homemade traps will help to deal with uninvited guests. Follow the instructions for their manufacture, adhere to preventive measures.

From the following video you can learn how to make a mouse trap with your own hands in a few minutes:

A mouse trap will help get rid of unpleasant and sometimes dangerous rodents - it’s easy to make a device with your own hands that is not inferior in efficiency to commercially available models. Self-production of mousetraps from improvised materials will save money, because most often several devices are required to eliminate pests at the same time. According to the descriptions given, you can choose the most effective and simple designs.

If the use of poisonous substances for rodent control is undesirable due to the presence of children or pets in the house or cottage, and buying several traps in the store seems too expensive, it's time to learn how to make a mousetrap yourself. For manufacturing, you will need simple materials that are always available in everyday life - paper, various containers (you can often use empty waste containers), wire, a ruler, etc.

Please note: most do-it-yourself traps are reusable or self-loading, which allows you not to constantly monitor them and catch several rodents with one device, leaving the trap unattended for the time of departure (optimally - no more than a week, so that an unpleasant smell does not appear.

Bait

In order for pest hunting to be successful, it is not enough to know how to make a trap for mice. It is also important to "convince" the rodents to show interest in this trap, which means that an attractive bait is required. There is a common stereotype - mice are very fond of cheese. Animals really like this product, but sunflower seeds, lightly toasted sunflower oil or a piece of bread dipped in it will turn out to be more effective as bait. Sesame oil will be a win-win option - its aroma does not leave mice indifferent, and you can also use a piece of lard.

Bucket and ruler trap

This trap model is suitable for those who prefer the simplest but most effective solutions and prefer clear instructions, including how to make a mousetrap with their own hands. Another advantage of such a trap is the interchangeability of its elements - instead of a bucket, you can take an old pan or plastic container, and the ruler can be replaced with any suitable sized rail or strip of thick cardboard.

In addition to the ruler, you will need a knitting needle or a rigid metal wire that is round in cross section. The needle is glued to the ruler perpendicularly and serves as a support - it is laid so that both ends of it rest on the edges of the bucket. A rail or ruler glued to the spoke should rest with one end on the edge of the bucket, and hang over it with the other. It is at the overhanging end that the bait is placed.

The trap is located in a place where the mouse can climb onto the rail laid on top of the bucket. The mousetrap will work even if the container is empty, but to increase efficiency, it is recommended to fill the bucket with water by about a third.

This trap works just fine. The mouse walks along the ruler, attracted by the smell, but, having overcome the intersection of the ruler and the knitting needle, it shifts the center of gravity of the structure, as a result of which the end of the ruler, freely hanging over the bucket, drops sharply and dumps the rodent into the container. In order for the mousetrap to work repeatedly, the bait should be fixed on a rail so that when triggered, it does not fall into the bucket with the mouse.

Trap from a jar with cut paper on the neck

Such a do-it-yourself mouse trap is made by analogy with the previous one. In order for the mice to climb to the top of the jar, a “ramp” is installed, but the bait in this case is placed inside the jar, the neck of which is tightened with paper. To make the paper on the neck of the can become a real trap for rodents, it is carefully cut (for example, with a razor) crosswise.

As soon as the animal hits the paper, the "petals" formed during the incision bend inward, the mouse falls into the jar. In other versions, it is possible to lay a lightweight bait directly in the center of the cut paper, or the bait is tied to a rope and located above the center of the can.

The disadvantage of such a simple trap is not very high efficiency. Mice somehow sense a catch and are wary of the notched paper.

Glass jar and coin trap

Such a homemade mousetrap from a jar is simple and can also be made from a saucepan, and if desired, a coin can be replaced with a large button or a metal washer. A coin (button, washer) serves as a support for the raised edge of the can. A strong thread with a hook at the end is glued or tied to the support. A rod is installed inside the container (you can use a wire, a twig, etc.), through which the thread is thrown. The bait is put on the hook.

Attracted by the aroma, the mouse pulls on the hook with the bait, after which the thread stretches and pulls the support out from under the can. For maximum effectiveness, place the bait at a distance of 2-4 cm from the surface. The disadvantage of the trap is that it requires reloading. That is, having “covered” one mouse, the jar ceases to be effective.

In a simpler version, the bait can be glued to the wall of the can, then when you try to get to it, the mouse will shake the can, which will lead to the fall of the support.

In order to remove the caught rodent, it is convenient to slip a sheet of cardboard under the triggered jar.

Other ways to get rid of mice are described.

Plastic bottle traps

1 option

Such a do-it-yourself mousetrap from a plastic bottle is made in a few minutes. The container is cut at the level of 2/3 of the height (the longer part is with the bottom). After that, the part with the neck is turned over (the neck without the cork becomes directed inside the structure). The neck is lubricated with oil, and the bait is placed inside the container. To prevent the parts from separating, they can be fastened with glue, wire or in another way. The mouse easily slips through the lubricated neck, but cannot climb back out.

Option 2

Another simple mousetrap that even a schoolboy can figure out how to make.

A plastic bottle (the neck is cut off approximately at the point where the narrowing begins) with the bait inside is placed on a table or shelf so that a significant part of the container hangs from the edge of the surface. In this case, the bait should be located at the very bottom. Such a trap is tied to a shelf with a string, the length of which ensures that the trap hangs above the floor when it falls. The mouse, getting into the bottle, shifts the center of gravity. The trap falls and hangs along with the caught rodent.

Mousetrap from a bucket and a rotating bottle

One of the most ingenious solutions on the topic "how to make a mousetrap at home", while effective and easy to perform. It will require a metal rod-axis and a plastic bottle with a cap. Holes are made in the container (in the lid and bottom) along the diameter of the axis, after which the bottle is put on the rod so that it remains free to rotate. The rod is placed on the edges of the bucket. Optimal fix its position, while maintaining mobility.

A bucket (you can also use a basin) is recommended to be filled with water. As a bait, the bottle in the center is coated with any (attractive smell for mice) composition (processed cheese, sunflower or peanut butter, etc.). After that, a "ramp" is built from the floor to the edge of the bucket. Having freely reached the edge of the bucket along such a “bridge”, the mouse tries to move to the bottle, but the latter, under the weight of the rodent, turns around its axis and dumps the pest into the container.

Glue traps

When choosing how to make a mousetrap with your own hands, you should not lose sight of the simple glue traps. They will require special glue for rodents, which is sold in specialized stores, bait and bases (you can use thick cardboard, small plastic pallets, plywood, etc.). The base is smeared with glue, and the bait is placed in the center of the trap.

Getting to the fragrant "treat", the rodent sticks to the viscous composition. The disadvantage of such a trap is considered by many to be unaesthetic. It is no longer possible to unstick the animal from the mousetrap, and the sight of floundering rodents and their squeaking is not a pleasure if the owners are at home.

Rodents are carriers of dangerous infections. In addition to aesthetic inconvenience, they pose a danger to the health of children and pets. There are a wide variety of mouse traps available in stores. However, there are times when there is no time to search for the necessary mousetrap or there is not enough money to buy them. In this case, self-made devices will come to the rescue, which are not inferior in quality to store designs. How to make a mousetrap with your own hands? You will find the answer to the question in the article.

Advantages of homemade mousetraps

Ready-made traps differ in the principle of operation. Some hold or kill the mouse, others scare it away with ultrasound. The use of certain types of traps is unacceptable if there are pets and children in the house who may accidentally fall into a trap or be poisoned by the chemicals used.

The main advantages of homemade mousetraps:

How to prepare bait?

The most sophisticated trap, thought out to the smallest detail, does not guarantee that the rodent will be caught. The main thing in a mousetrap is the right bait. Pay attention to the location of the trap, the access routes to it must be open so that the mouse can easily get to the treat. There is a well-known stereotype imposed by cartoons that mice are crazy about cheese. In fact, things are a little different. Rodents really love this product, but catching a mouse on such a bait will be quite problematic. As a bait, it is better to use:

a piece of smoked lard or sausage;
white bread crackers;
sesame;
bread soaked in sesame oil;
sunflower seeds;
peanut.

The aroma of products will attract the attention of mice and lure them into a prepared trap. It is worth noting that the smell of unrefined sunflower oil can kill the smell of a person, so they need to lubricate the trap before use.

The bait in the mousetrap should be changed periodically, because, having sensed the danger, the mouse stops responding to the aroma that is attractive to it.

Homemade trap from a can and a coin

A mousetrap from a can is suitable for those who are not ready to kill rodents. The mouse will be trapped, while its state of health will not be disturbed. To make a trap, you will need a jar (you can use a saucepan) and a coin or a button.

The edge of the jar is lifted and placed on a coin, which serves as a support. The hook with the bait is fixed inside the container with a thread. A delicacy for rodents is best placed at a distance of 2-4 cm from the surface. This achieves greater efficiency of the device.

The thread is fixed on the rod, which is installed in the middle of the can. A branch or wire can be used as a rod. The principle of operation is to pull the thread and pull out the support from under the jar after the mouse tries to get a treat while inside the jar. The jar covers the rodent and keeps it in a trap (look at the video).

The main drawback is the lack of automatic reloading. After catching one mouse, the device must be reinstalled. To get a caught rodent, place a thick sheet of cardboard or a flat plate under the structure. To facilitate the design of the mousetrap, instead of a rod and a thread, you can stick the bait on the wall of the can with your own hands. When the mouse touches it, the structure will lose balance and the rodent will be trapped.

Can and paper trap

A can and paper mouse trap is an easy way to catch a pest. To make a mousetrap, you will need a deep container, a sheet of paper, an elastic band and a knife (razor).

A sheet of paper is placed on the neck of the jar, the edges of which are folded down and tied with a thread or fixed with a rubber band. In the center of the hole, you need to make an incision with a razor and a sharp criss-cross knife. The bait is placed in a container or hung over a jar at a short distance. If you use a light weight treat, you can put it on paper. In order for rodents to get to the bait, a special bridge should be installed connecting the surface to the upper edge of the container.

As soon as the mouse hits the center of the paper, its edges will move apart under the weight of the pest and the rodent will fall into a trap. In order to prevent exit from the trap, water can be poured into the container. This method is not very effective, as mice sense danger and do not go to the center of the paper. As a rule, young individuals come across in the adaptation.

How to catch a mouse with a bucket and a ruler?

The design feature is the interchangeability of the main elements. Instead of a bucket, you can use a pan or other deep container; instead of a ruler, a flat thin rail is used.

For manufacturing, it is necessary to securely fasten a wire or knitting needle to the bucket. You can make holes in the plastic container on both sides and push the wire through them. The ruler should be placed on one edge of the bucket and wire so that the longer length of the rail remains suspended. The bait must be placed on the far edge of the ruler. Then you should build a special "ramp" so that the mouse can climb to the treat.

Smelling a pleasant aroma, the rodent will go along the rail. Having passed through the intersection of the ruler and the wire, the pest will change the gravity of the structure, the ruler will turn over, and the mouse will be trapped. If you fix the bait in such a way that it does not fall into the bucket along with the rodent, you get a reusable mousetrap with your own hands. To prevent the pest from getting out, you can pour water into the container.

There is an easier way to make a mousetrap using a bucket and ruler. On the edge of the table you need to put a thick sheet of cardboard or plain paper, placing a ruler under it (see photo). Place a bucket or other deep container of water under the surface. Attach the bait to the edge of the cardboard. The mouse will go to the smell of treats and turn the structure over with its own weight. When fixing a ruler with a table and a bait, a reusable design is obtained, with which you can catch several pests.

Plastic bottle traps

Plastic bottle mousetraps are easy to make and effective. There are several types of structures that can be built at home.

From a plastic bottle, you need to cut off the neck (threaded part). For ease of action, you can use a clerical knife. On one edge of the container, make a hole with an awl and insert a thick thread into it, which should be securely fixed. One end is attached to the bottle, the other - to the table (to a nail or self-tapping screw) or a pan. The length of the thread should keep the bottle hanging. The bait is placed at the bottom of the container.

The bottle is placed horizontally on the edge of the table so that the bait is suspended. The mouse will try to get a treat and go inside the bottle to its bottom. Under the weight of the rodent, the center of gravity of the structure will shift, and the bottle will fall. The mouse will be trapped, like in a house.

For the second method, you will need a plastic bottle and bait. Even a schoolboy can make such a trap. It is necessary to cut the bottle into 2 parts (the part with the bottom should be larger). The other part is turned over so that the neck is inside the bottle. A bait is placed at the bottom, the neck is lubricated with vegetable oil. To securely fix the structure, you can fasten the parts of the bottle with thread, wire or tape. The mouse will easily get to the bait through the greased neck, but will not be able to get back.

Glue traps

In such traps, special glue is used as the main element, which can be purchased at hardware stores. The method consists in applying glue to cardboard or plywood, in the center of which is the bait. Once on the adhesive surface, the mouse cannot get out and dies.

Glue traps are not humane, since the death of a rodent can be long and painful, it is impossible to peel off the pest from the composition.

For the convenience of using glue mousetraps, you can build a reusable trap. To do this, you need a shoebox in which a hole is made for mice. In the box under the hole, a cardboard with glue is installed, and in the center - a bait. The pest will fall into the trap, smelling the smell of goodies.

Glue traps are best made with rubber gloves, avoiding contact with exposed skin. If there are small children and pets in the house, it is better to refuse this method. The most suitable method is an electric trap. An electrical device guarantees the safety of family members and pets.

Categories

Popular