Arrangement of a country shower with your own hands: drawings, diagrams and options for heating water. How to make a summer shower with your own hands: diagrams of common designs Arrangement of a shower room in the country

To give with your own hands, then properly prepare for the hot season. Cool and refreshing, it will bring pleasure to both adults and children. From what and how you can build a shower, and where it is better to place it.

Do-it-yourself summer shower for a summer residence: varieties

The simplest designs of a summer shower were erected on six acres by our grandparents. Today, when new technologies, materials, and the dachas themselves have stepped over the status of tiny panel houses, the appearance of shower cabins has also changed. With a strong desire, you can take a swing at a capital summer shower for a heated cottage, on a solid foundation and with a large shower cabin. You can limit yourself to a light frame option, using improvised means.

And yet, which design option is preferable if you are planning to build an outdoor shower yourself. The choice depends on three main factors:

financial opportunities

construction skills
dacha status

The simplest summer shower in the country can be assembled from metal tubes, shower curtain and a plastic barrel.

The stationary option involves the construction of a solid shower cabin made of wood, with the construction of a drain and a connection to the water supply. You can assemble a shower from a wooden frame covered with a film. In addition, the shower can be freestanding or attached to the house. And here, too, there are a lot of options.

The simplest design connected to the house looks like this: a water pipe leading to a part of a brick wall, a wooden pallet with a drain, and the top of the shower is made of a metal arc attached to the wall and hung with a curtain for the bathroom.

If you bring the shower to the corner of the house, then it remains to build only two walls and close the booth from prying eyes.

In the design of man-made showers, be guided by your own preferences and the materials that you have.

Advice! To simplify construction, use a portable shower model sold in stores as communications.

Where to put the shower

If the shower cabin is tied to the house, complex calculations for its installation will not be required. Naturally, it is placed on the back wall, not far from the entrance to the house. For ease of use, it is desirable to lay plastic track to the soul.

If you are planning a do-it-yourself summer shower in the country house in a separate version, you should choose the right place. It is necessary to observe several important conditions that will affect the accessibility, convenience and practicality of the design.

So that the water from the shower head does not make you want to rush into the house and wrap yourself in a warm blanket, we choose a place under the sun. On a platform open to the sun, the water in the barrel will naturally heat up.

Checking the terrain. It is desirable that it be slightly inclined, this will simplify the outflow of water from the shower.

For the convenience of laying water pipes and a short transition, we have a shower stall near the house.

We check the wind rose and choose a place in a summer cottage that is not blown by all the winds.

Advice! Great, if you have a pool in your country house, place the shower next to it.

We build a summer shower

Getting down to practical advice, let's try to build a simple, but aesthetically beautiful and comfortable outdoor wooden outdoor shower for summer cottages, with a minimum consumption of materials.

Let's cook:

boards and slats
shower set (faucet, curved tube, bracket, adapter and nozzle)

garden hose
self-tapping screws
fasteners

level
drill
Bulgarian

concrete mixer (tank for mixing cement mortar)
shovel
Master OK

It’s a hot day, you are in the country, something needs to be done, but you don’t feel like it at all. Familiar? I would like to freshen up, but there is no river nearby, and so far it has not been possible to equip the pool either. A simple summer do-it-yourself summer shower is an excellent solution to the problem of heat and fatigue. Even a small stream of water literally in a minute will refresh and make you more cheerful.

This building has another practical purpose - taking care of our health. It is very important to periodically wash off the accumulated dust, which may contain, for example, particles of fertilizers. Doctors note that summer residents, who put off all hygiene procedures until a comfortable home bathroom, very often then go to doctors with skin diseases and gastrointestinal problems.

This building has many options. Both technically and aesthetically. The principles of the device of any country shower are the same: you will need a frame, a fence, a tank and a floor (pallet). But the implementation can be very different.

The easiest option is to take a bucket, punch a dozen holes in its bottom and hang it in a convenient place. The advantage of this option is its absolute accessibility. Still, ten liters of water may not be enough. And from the point of view of aesthetics, such a shower will pull a maximum of one point. But you don't need to build anything.

If you are not looking for simple solutions, then a garden shower for a summer residence can be made of wood, various plastics, metal profiles. Each option has its own tricks and pros and cons. For example, a do-it-yourself wooden outdoor shower can be built using a large number of design options, but plastic and metal do not require special protective treatment.

Country summer shower can be made of wood or corrugated board

It is very important to consider from the very beginning how many people will use the shower and how often. Two key points depend on this: tank size and availability of a special drain.

The comfort of using the shower can also be at different levels. If possible, it is better to equip not just a shower, but with a dressing room. Then your things will definitely stay dry. And simply the highest chic is a whole house in which there is both a shower and a toilet, plus a dressing room. Of course, this is the most expensive and time-consuming option.

Little trick: The water will heat up faster if you choose a black shower tank.

Where to put?

The place for a summer shower should be sunny and away from trees and any buildings. This is important because the sun works as a water heater. The second point - do not put the shower where the ground drops noticeably, otherwise the water flow will be difficult. You need to take special care of the drain itself.

For example, with infrequent use and a small amount of water, a small drainage layer under the pan is sufficient. And if a shower is being built for a family of several people who plan to wash often, then it is better to provide a septic tank. Moreover, it is undesirable to arrange it right under the base of the shower, otherwise unpleasant odors may come. It will be enough to retreat 2-3 meters from the building.

Another trick: You can plant moisture-loving crops near the country shower - they will provide natural drainage and decorate the place.

We are working!

After you have decided on the place, design and material, it's time to build a shower for giving, step-by-step instructions to help you.

Prepare the base for the future shower: choose the direction of the drain and make an appropriate slope.
If a drainage hole is provided, dig it at a pre-selected location. Depth - 2-3 meters, diameter - to place old tires or a barrel without a bottom. At the bottom of the pit there should be a small layer of sand or gravel.
From the future shower stall to the pit, make a drain: dig a groove, put it in it waterproofing layer. You can use roofing material, hydrostekloizol or film, pour concrete with reinforcement. It is not recommended to use clay for this, it tends to erode over time, which will lead to contamination of the drainage ditch.
When the drain and pit are equipped, they need to be closed. Grids or spreaders can be used. This is especially important if there are children and / or animals on the site.
Now you can install the supports for the frame. The standard option for building a summer shower in the country is to make four supports with a diameter of 10 cm, installed in one and a half meter recesses and poured with concrete as a foundation (of course, if the shower is not planned to be moved anywhere). Supports should be 20-30 cm above the surface.
As a frame, a bar 10 by 10 cm or metal pipes is used. Be sure to check the vertical with a level or plumb! This foundation should be allowed to settle for 2-3 days. If the design of the shower does not involve such complex work, then the installation still begins with the verticals of the frame. The height of the building should be 2.5-3 m, and the area of \u200b\u200bthe shower compartment should be at least 1x1 m.
The next step is the top and bottom trim.
If the building has a roof, then this is the next stage. In some cases, it serves as a roof itself.
A water tank is usually a plastic or metal barrel or tank (100 or 200 liters). Before installation on the roof of the cabin, it is necessary to make a branch in it and fix the shower head. If it is impossible to bring to the barrel water filling hose, then later you will have to install a ladder nearby to raise water with buckets. This version of a summer shower for a summer residence is easier to build, but more difficult to maintain. It is also not worth putting an open container and relying on rain filling - rains can fail. In addition, dust, dry leaves and insects will get into an open dish.
Now you can move on to the walls. They can be solid, from floor to ceiling, or literally cover only the "most interesting". You can use wooden boards, corrugated board, slate sheets, moisture-resistant plywood or lining, and even polycarbonate. The main thing is to do everything evenly and fix it well.
The floor is done last. He can be continuous with a drain for water or grating. This option is suitable if the shower is not planned to be mercilessly exploited every day.
The final gesture is the installation of a door or a curtain, depending on the conceived shower model. After that, you can conduct tests and celebrate the appearance of a new building.

A separate article presents popular ones, according to which you can build a structure yourself.

So far, we have been talking about the soul as a separate building. But you can simplify your task a little. For example, attach a shower to one of the walls of a country house. Of course, if you have a wall at your disposal, which is illuminated by the sun almost all day. In this case, only two supports, a tank base, a floor and a drain are required. If the tank can be installed on the roof, this option also deserves attention.

Prefabricated polycarbonate shower

At the word "polycarbonate" most of us imagine a greenhouse. The question immediately arises - how to use such a shower, is it transparent? However, especially for showers, a material is produced that perfectly hides everything. Polycarbonate is attached to a metal frame, and the entire structure is attached to a base, preferably concrete. In this case, anchor fasteners are used.

If you still don’t want to think about how to make a summer shower yourself, then there are a lot of models of ready-made polycarbonate showers. They can be single or double and even triple - the same combination of shower + toilet + dressing room, which has already been mentioned. The equipment can also be different and is selected according to the financial capabilities of buyers. For example, a cheaper option is a shower stall with a curtain instead of a door.

No matter how great a polycarbonate shower cabin for a summer residence is, you still have to equip a drain and a drainage pit (with a large number of active users). But these efforts are redeemed by the simplicity of further actions. Installation of ready-made polycarbonate booths is a relatively simple matter. And yes, it won't take much time.

Depending on the design and color of the plastic, such buildings can look very attractive. Of course, you should not show off a polycarbonate booth and put it in the most visible place. But the owners themselves and guests at the dacha will be very pleased to look at such a shower and wash in it. In addition, polycarbonate does not require special care.

What is better to choose, or a barrel? Learn about the pros and cons of containers, as well as the materials from which they are made.

Various types of toilet bowls for country toilets are described on.

There is information about plastic storage tanks for arranging country sewerage at this link

Enjoy the results

Now you know how to make a shower in the country yourself. And if you are sure that you need a country shower, then boldly act. The best result is obtained with careful preliminary calculations. And at the end of all the work, you can return to everyday country concerns - in which case, you will have somewhere to freshen up.

After a hard day on earth, sometimes you want to cleanse your body of dirt and refresh yourself in warm water.

If there is a body of water suitable for swimming nearby, then it’s good. And if not, then it's time to think about arranging a summer shower in a summer cottage.

What you need to know about the summer shower

There are two types of this building:

Naturally heated by sunlight. This shower is simpler in design. But it will not work on cloudy and cold days.
With artificial heating. In this case, you will need to think about the type of heating device and take care of its proper design. But such a shower will not depend on the vagaries of the weather.

A shower cabin with a tank can be purchased at the store. Its cost varies from 5,000 to 18,000 thousand rubles, depending on the materials.

Such a shower will last much longer and the water in it will heat up faster and hold heat more reliably. For a shower design, a square-shaped tank is more suitable. It is more stable and roomy.

In addition, this form accelerates the heating of water. The size of the tank depends on the number of people who will use it during the day. But remember, the larger the tank, the slower the water warms up in it.

Now consider the stages of preparation and construction of a summer shower with heated water.

Preparatory work

It all starts with choosing a place where the shower will stand. It should be protected from the wind and as accessible as possible to the sun's rays.

The first condition is necessary to prevent the possibility of catching a cold due to a draft after taking a shower.

The second is to make water heating more efficient. Even if you are designing an artificially heated shower, a natural one will help reduce energy consumption. And an important factor - it is better to put a shower near a reservoir or a water tap.

Having decided on the place, it's time to think about the size of the structure. The standard is a square-shaped shower with walls one and a half meters long and a little more than two meters high. But if there are overweight or very tall people among the potential users of the shower, this must be taken into account in the design of the cabin.

An important factor is what materials will be used in the construction. You can use a frame made of wooden beams. It is eco-friendly, but not very durable.

Therefore, the shower frame is preferred to be made of metal, and everything else is made of wood. In this case, you should prepare tool kits for working with both metal and wood.

The last point that needs to be considered before starting construction is the drain device. There are several options. The simplest is that the water goes into the soil under the booth.

This is not very convenient, because you have to leave gaps between the boards in the floor, and this in turn will lead to drafts in the shower. A more common option is to drain water into a specially dug cesspool or septic tank.

To do this, a tray is installed on the floor of the shower stall. It is specially placed with a slope so that the used water does not stagnate and does not require additional efforts for cleaning after taking a shower, and a pipe or hose is brought from below, the other end of which is sent to the pit.

Building a summer shower

Construction begins with the installation of vertical racks. If the soil in the area of \u200b\u200byour summer cottage is not reliable, then it makes sense to build a foundation under each rack.

The frame of the three walls can be reinforced with cross beams. So you can be sure that the structure will not fall apart in a couple of years under the weight of a tank or something else. And on top you need to equip a platform for a tank of water.

Sheathing is carried out with already prepared material in two layers (external and internal), between which insulation is optionally laid.

This extra layer is necessary if you plan to use the shower in spring or autumn when the weather is not warm enough. After completing this part of the work, the door is hung.

In conclusion, the installation of the tank is to be done. First, a heating element (heater) is installed inside on metal brackets, and so that it does not touch the walls. Then a hose equipped with a water tap is connected to the tank, and an electric cable is connected to the heating element.

All this should now be installed on a prepared platform on the roof and secured with metal cables. From above, you can build a semblance of a greenhouse: stretch a film (preferably dark in color) on wooden bars.

So the heat will be attracted and at the same time not go outside. At the final stage, it is worth once again checking the tightness of the system, if necessary, use rubber gaskets or silicone seals.

With limited time or funds, you can arrange an endowed version of the shower. It settles down near the wall of the country house, to which a water tank and a shower head are attached. The walls of the shower room are replaced in this case with curtains made of tarpaulin or cellophane, attached to a light wooden frame.

The dacha always combines a place of both work and rest. Therefore, make sure that the working conditions are comfortable, and the place of rest is pleasant. A summer heated shower will help you with this.

Photo ideas for a summer shower at their summer cottage

You can easily make and equip a summer shower in the country with your own hands. Photos and dimensions, as well as recommendations for choosing a place for construction, you will find in this article. After all, there is nothing better in the summer heat than to cool off with cool water, especially after active work on the plot. With the onset of hot days, the presence of a shower in the country becomes an urgent and necessary requirement. This factor is especially important if your house is under renovation, and plumbing communications have not yet been completed.

In any case, the interior space of the shower must be spacious so that the bathing person can comfortably accommodate himself and with him all the things necessary for this procedure. The most common parameters of country shower buildings are 2.5 meters high and 190/140-160/100 cm wide. It is necessary to plan the construction of a summer shower in the spring, at its very beginning, so that by the time summer comes it will be ready.

There are no particularly strict criteria regarding the arrangement of such a shower. If you have imagination and the ability to hold construction tools in your hands, you will be able to translate your ideas into reality and build such a thing that is necessary for giving. Depending on the complexity of the plan, it is possible to equip a simple outdoor shower in one day. A more detailed project will take more time, but it will also serve you for more than one year.

Shower for a summer residence, which place to choose for it

So that the water in the tank is not cold, it is more logical to place the shower building in a place illuminated by the sun's rays. If you prefer to take a shower in the afternoon or late afternoon, then you should choose a part of the site where the concentration of solar activity is observed in the afternoon. It is important that this place is protected from winds.

The second important factor is the availability of a drain for used water. A summer shower for a summer residence should be installed on a hill so that the water drains quickly and does not stagnate, attracting insects. The operation of any shower involves the use of large amounts of water, and if many people (a large family) wash in it, then this nuance must be calculated and properly equipped.

If the capacity of your shower tank will be approximately 1-2 m³, then a drain pit will be required. When arranging a place for water flow, its correct placement is important - in no case should it be located under the building itself. A sewer pit or a septic tank with drainage should be located at some distance from the booth, in turn, the slope should go in their direction.

The presence of a waterproof layer for drainage is highly desirable: hydrostekloizol, PVC film, roofing felt or concrete screed are suitable for this purpose. The drainage pit should be at least 3 meters away from the cabin, its depth should be 2.5-3 meters, the bottom is covered with gravel or a thick layer of sand. The top of the pit must be covered and fenced off.

How to make a shower in the country - an example of a simple design

There can be a great variety of options for this useful summer cottage - here the matter already depends on your creative approach. For example, we will consider the features of the "standard" version of the country summer shower.

The shower should be comfortable, so the smallest dimensions of the internal space should be at least 100 × 100 cm. Movement should not be constrained - a person should freely raise his hands and bend over during the washing process. A small place for clothes and towels (cloakroom) should also be allocated, 50-60 cm is enough for it. Thus, in the total footage, the dimensions of the shower will be 160 × 100 cm and 2-3 m in height.

Install strong and reliable racks - this is your safety, since the tank filled with water for an outdoor shower has a huge weight. For this purpose, a wooden beam 100 × 100 is ideal.
It is better to dig the racks into the ground, having previously treated them with tar or a fat-containing agent. Fill them with concrete mortar, by the way, it will be best.
For the container at the top, a horizontal platform should be equipped.
The cabin is made of any materials, the main thing is that it should hide the swimmer from prying eyes and protect from drafts.
Containers for a summer shower can be metal or plastic. It is worth considering that the metal tank will heat up faster, but it will also rust. In order for the water to heat up quickly, it is recommended to paint the tank with black paint.
If you make a frame over the tank and cover it with a plastic film, then the process of heating water will be much faster.
The valve for the tank can be anything, but a ball valve is most suitable.

The whole process begins with marking the perimeter of the future shower, the racks are installed at the corners and connected from above with a dressing from a similar beam. After that, there is a turn of the lower dressing, keep in mind that it should be located 10-15 cm from ground level.

To fasten all frame fragments, use long bolts - this will have a positive effect on the overall strength of the structure.

However, you can do it easier and install a metal or acrylic tray, while the water will be drained using a hose.

To ensure that the shower door closes tightly, use seals. The shower compartment and the dressing room can be separated by a special curtain, and it would be better if the threshold between these two compartments is somewhat high (to prevent water from flowing into a dry room).

The summer shower, as already mentioned, can be finished with absolutely any material on the outside. Lining, plastic, polycarbonate, moisture-resistant plywood, fiberboard, slate, metal sheets, siding - the main thing is that the building is in harmony with the rest of the buildings on the site.

It does not hurt to pre-open wooden materials with protective compounds.

If the frame is welded from metal, then it must also be coated with anti-corrosion agents or painted with paint.

In order for the water in the tank to heat up many times faster, rafters can be laid on top of the upper trim, and a sheet of roofing iron can be placed on top of them. The metal will reflect the rays of the sun, which will make the process of heating water more active.

Summer shower tank, which one to choose

Separately, it is worth paying attention to water tanks or shower tanks - their choice is determined by the individual requirements and preferences of the developer. They are small and large-capacity, flat and round, iron and plastic. The size of the tank depends on how many people will wash in this shower, often a volume of 100-200 liters is enough for an average family. As mentioned above, it is better to choose a tank of dark color or even black - so the water will heat up faster.

Such a container must have a lid so that various debris and insects do not get inside. At the very bottom of the tank, a tap outlet is mounted, to which a diffuser is screwed.

There is an important point here - the tap should be located on the lowest part of the tank, so that all the water drains from the tank and does not stagnate.

Equipping a summer shower with your own hands, you can purchase a ready-made tank in a specialized department of the building market. On sale there are also containers specifically for such showers, with all the necessary parts included.

If you have a metal or plastic barrel of a suitable size, then after certain manipulations it can turn out to be a perfectly acceptable shower tank. For these purposes, a hatch is cut out on top of the barrel laid on its side to fill the water, and it itself is treated with acrylic enamel (or bath repair agent) from the inside - this applies to metal containers.

And you can not lay the barrel on its side. Everything is within your power if "hands grow from where it is necessary."

Also in this role, tanks from worn-out washing machines “act” well. Despite the fact that their volume is enough for 2 washes, they very quickly adapt to the shower tank, thanks to the presence of inlet and outlet pipes, as well as the necessary technical holes. Such tanks are not afraid of corrosion.

Equipping a summer shower in the country with your own hands, it is better to prepare photos and dimensions, as well as approximate drawings, in advance. So you will see all the working stages clearly and will be able to accurately calculate the final result. With such a work plan in front of your eyes, you will know how much material you will need for the exterior and interior of the booth and drain pit.

Paying attention to the functional part, do not forget about the aesthetic appearance of your summer shower - everything should be not only comfortable, but also pleasing to the eye.

Categories

Popular