Detailed instructions for assembling beds with a lifting mechanism, video tips from professionals. Detailed instructions for assembling beds with a lifting mechanism, video tips from professionals Step-by-step assembly of a sherlock bed with a lifting mechanism

Free within the Moscow Ring Road for orders over 10,000 rubles, up to 3,000 - 800 rubles, up to 10,000 rubles. - 500 rubles. Outside the Moscow Ring Road: up to 15 km - free of charge, over 15 km (starting from the 1st kilometer of the Moscow Ring Road) - 30 rubles. / km. Furniture in stock. Terms - 2-3 days. Pickup is not possible. Delivery, to shopping mall - 1000 rubles. with obligatory trim. Delivery on weekdays from 10.00 to 18.00. Evening delivery from 18.00 to 20.00 on weekdays and on Saturday +1000 rubles. to the main terms of delivery. Manufacturer - Glazovskaya MF.

lifting conditions

On a freight elevator - free of charge, on a passenger lift - 2% of the cost (at least 200 rubles), on hand - 0.8% of the cost per floor (at least 200 rubles).

Build conditions

Assembly cost - 10% of the order amount (excluding additional services), but not less than 1200 rubles. The cost of assembling the KITCHEN is 10% of the order amount (excluding additional services), but not less than 2000 rubles. The minimum departure of the picker within the Moscow Ring Road is 1200 rubles. Departure of the picker outside the Moscow Ring Road - 20 rubles. for each km, but not less than 200 rubles.

A double roll-up bed is a rational solution for a small apartment. Recommended mattress height - up to 23 cm, weight - up to 70 kg. The mattress "sinks" into the bed frame by 7 cm.

This bed is completed with the basis with the lifting mechanism with the improved gas springs. The distributed load on such a bed is 300 kg, taking into account the weight of the mattress. The base rests on the central side of the chipboard and metal brackets on the sides. HDFO sheets are loosely placed on the bottom of the box, protecting things from dust.

Attention: until a mattress is placed on the base, it does not fall!

The bed frame is made of chipboard 16 mm, 22 mm, PVC edge 0.45 mm. The bottom of the linen box - HDFO 3 mm. The head of the bed is framed with an MDF profile. Supports from MDF.

Colors:Sonoma Oak, Dark Anchor Ash

The size:(W*H*D) 1500*983*2120 mm

Base: orthopedic, lifting mechanism

Material: chipboard

Legs: MDF

Bed size (mm): 1400*2000

Possible mattress height (mm): up to 230

Kit composition:

The mattress is not included in the price of the bed and must be purchased separately.

Number of packs: 5

Weight, kg): 89

Furniture factory:"Glazov", Glazov.

Everyone dreams of having a comfortable and beautiful bed, but for small-sized housing it is difficult to choose a model that would simultaneously meet all these requirements. Here it is important to rationally use the limited area of ​​​​the room, so you should pay attention to the option with a lifting mechanism. Self-assembly of a bed with a lifting mechanism according to the instructions in the video is a completely affordable process.

The presence of a comfortable bed allows a person to get enough sleep and recuperate before a new day. If the bedroom is not large, do not be upset. It is enough to choose a bed with a lifting mechanism, which is characterized by compact dimensions, high comfort and original design. Moreover, the cost of such furniture can be different, so you can choose an option for any wallet. And to save even more, it is worth analyzing how professionals assemble such structures and do the same.

The scheme for assembling a bed with a lifting mechanism is quite simple, but first you should find out the main advantages of such furniture. Products of such a plan provide a person with comfort during rest and sleep, but at the same time they do not take up much free space in the room. The lifting mechanism is attached to a capacious box, inside which you can store bed linen, bedspreads. Thus, with a small area, you can solve the problem of storing bedding. For these reasons, beds with a lifting mechanism are so popular among owners of small city apartments.

For self-assembly of such a design, you will need the following tools and materials:

• hardware;
• a set of screwdrivers, a cap wrench, a screwdriver;
• wrench;
• yardstick;
• building level;
• a hammer;
• a sheet of paper, a simple pencil.

Thus, the work does not require expensive equipment or rare tools, which greatly facilitates the preparatory stage.

Assembly steps

The entire assembly process consists of several important steps:

• installation of the box and base;
• fixing legs if necessary;
• installation of corner ties;
• installation of the lifting mechanism;
• installation of a traverse;
• installation of the frame and mattress holders.

The instructions for assembling a bed with a lifting mechanism indicate all the work processes. At the first stage you will need:

• remove all elements of the future design from the packaging film, inspect them for defects. If one of the elements is defective, it will need to be replaced. A frame with cracks is unlikely to be reliable and safe for sleeping;
• lay out the drawers for their intended purpose on the floor with the side with holes up;

• connect the drawers to each other with the help of fasteners, and then hang the head of the bed on the box assembled with your own hands;
• to fix the individual structural elements into a single whole, you will need to use a screwdriver and screws.

Note that in some models, power elements of a longitudinal nature can be used. For example, one-piece longitudinal ties, as well as corners or brackets that are fixed to the frame with screws. This is important to take into account in the process of work.

Case assembly

For ease of assembly, the Selena bed frame is made of semi-assembled blocks:
1 - Front part, 2 - Headboard, 3 - Left plank, 4 - Right plank, 5 - Crossbar, 6 - Longitudinal plank.

Leg mounting

The supports of the structure are fixed on the frame using special platforms located on the longitudinal elements themselves, or screwed separately onto the sides. Then they attach shelves, corners in the upper part of the tsarg. Some bed models do not have free-standing supports, instead of which a one-piece side frame is used.

Experts insist that it is not worth tightening the screws right away, because in the future it will be necessary to align the sides, shelves, corners in a perpendicular plane. The lifting mechanism is fixed in the next stage of work.

Installation of corner braces

This process is carried out after attaching the supports to the bed and is necessary to make the structure more reliable and stable. Each of the corner ties consists of 5 parts:

• the screed itself;
• 2 futorok;
• 2 countersunk head bolts.

To work, you will need to use a 10 mm drill, a screwdriver, a hexagon or a hammer. If it is necessary to disassemble the structure, the presence of a screed will allow you to easily disconnect the parts from one another.

Corner brace

Hoist attachment

At the next stage of work, it is necessary to install and fasten the lifting mechanism to the bed. It is extremely important not to make a mistake when placing it and determining the sides, because otherwise the smooth operation of the mechanism will be disturbed. This will require:

• fix the bed frame on the lifting mechanism. Use screws for this purpose. Before tightening the fasteners completely, be sure to align the gaps between the frame and the base;
• Specify the required level of force to control the model. Installation of the unit in the lifting mechanism should be done by hand with the cylinder up, using nuts with a retaining ring, fluoroplastic washers;
• tighten the nuts until they stop, and then slightly loosen the fastening, leaving a minimum play. The operation of the lifting mechanism should be checked several times.

Hoist attachment

Installation of the frame and mattress holders

It is worth installing comfortable handles on the bed frame for trouble-free control of the structure, as well as a limiter for the mattress. All work must be completed by mounting the bottom of the bed and putting on a cover on its perimeter.

If the base consists of lamellas (from 15 to 25 pieces, depending on the model), they will need to be hammered into special holders with a hammer. Each lamella is fixed on both sides, so the process may take some time. Now you know how to assemble a bed with a lifting mechanism, so this task will not cause difficulties.

Installation of slats

Possible difficulties

Of course, professionals with extensive experience in assembling various kinds of furniture can easily assemble beds with a lifting mechanism. But newcomers to this business may experience some difficulties, which can be found in the table.

Remember a few more important points.