Ariston sun 24 ff error codes. Heating systems for country and country houses. Boilers, geysers, water heaters - Repair, service, operation. Recommendations for assembly and installation. Double-circuit wall heating systems

The Ariston trademark, under which high-quality household and, in particular, heating equipment is produced, is today the property of the Italian concern Indesit Company. This brand combines the proven traditions of the past with the innovations of the future. All this makes Ariston appliances the perfect solution to ensure maximum comfort in your home.

Currently, the production divisions of Ariston and Hotpoint are combined into one functional structure. The result is a joint trademark, which is steadily gaining momentum in popularity both in Europe and in Russia.

A special place of honor among the assortment of Hotpoint-Ariston is occupied by water-heating boilers, which, perhaps, are the pride of the Italian company. Units supplied to the world market are distinguished by ergonomics and stylish design. It would seem, how can you make an ordinary design not only functional, but also visually attractive? Italian engineers from Hotpoint-Ariston were able to do this.

The undoubted advantage of Hotpoint-Ariston boilers can also be considered that they are distinguished by a high level of safety and ease of everyday use. They are also distinguished from competitors by their quiet operation, which is also very important, especially when installing heating equipment in a small apartment, where every sound can cause discomfort.

Hotpoint-Ariston designers strive to diversify the appearance of the proposed structures as much as possible, so that the buyer has the opportunity to choose exactly the model that harmoniously fits into the concept of a particular interior. Now it is not at all necessary to hide the water heating unit in a specially designated place, since the Hotpoint-Ariston boiler looks very stylish and concise.

The technique of the Italian brand is a unique combination of elegance, reliability and manufacturability. An important plus of Hotpoint-Ariston boilers is their environmental safety. And although this quality is not valued by the Russian consumer as highly as by the European, the loyal attitude towards the environment confirms the manufacturer's desire for continuous improvement of each unit of the model range.

Ariston has a lot of achievements in its long history. Founded in the 1930s as a family business, today it can safely be called one of the leaders in its industry. Today, products offered under the Ariston brand rank third in their market segment in terms of sales. The main activity of this functional division of Indesit is the production of household appliances of the middle and high price segment.

If we talk about heating equipment offered on the domestic market under the Hotpoint-Ariston brand, then first of all it is worth mentioning BS type water heating boilers. It is this technique that is in deserved demand all over the world, due to its efficiency and performance. At the same time, each of the models in the BS line has small dimensions and weight, which greatly facilitates the process of their transportation and installation. An obvious plus of these heating boilers is also that they are equipped with separate heat exchangers. Separately, it is worth mentioning the reliability of the built-in hydraulics, which can withstand aggressive operating conditions without any problems.

Let us consider in more detail the most popular modification of equipment in this line - the boiler Ariston bs 24 ff

The gas boiler Ariston bs 24 ff is a high-performance wall-mounted 2-circuit type unit that can be used simultaneously for hot water and heating. Among the offers on the market, this equipment can be considered the most attractive, since it combines technical excellence, durability and affordable price.

Experts recommend installing Ariston bs 24 ff as a universal means for heating apartments and private residential buildings. This technique makes it possible to significantly reduce the cost of the family budget for heating, when compared with the central water supply system. By purchasing an Ariston bs 24 ff boiler, you can forget about the cold weather even at unusually low temperatures outside the window. Italian brand equipment is able to maintain comfort in your home at all times.

Among the advantages of the Ariston bs 24 ff model, the following are worth noting:

• Adaptability to work in difficult Russian conditions. The technique easily copes with lowering the gas pressure in the system to a level of 5 mbar. In addition, the boiler continues to function even with water pressure drops in the circuit, which is also very important for our country. Ariston bs 24 ff is adapted to power surges due to the presence of a special protection system.
• The boiler is able to maintain operation even at very low temperatures outside the window (up to -52 degrees Celsius).
• The presence of an analog control panel, which displays the temperature of the coolant in the system.
• The possibility of distributing the intensity of the heating system without affecting the water heating system.
• Electronic flame modulation.
• Protection of the boiler against scale.
• Pump blocking prevention system.
• Prevention of freezing of the coolant in the system in case of a decrease in the air temperature outside the window.
• Ariston bs 24 ff is able to independently diagnose a problem and adequately respond to its occurrence.

The Ariston boiler will please the buyer with the presence of a copper heat exchanger and a secondary plate heat exchanger made of stainless steel. The specialists of the manufacturing company took care of the durability of the equipment, equipping it with a durable stainless steel burner that can maintain stable operation for decades.

As additional structural advantages, it is worth noting the elements of the hydraulic system made of durable materials, a 3-way valve with a drive, two temperature sensors and two filters for mechanical cleaning of the coolant.

Ariston bs II 24 ff

Ariston bs II 24 ff is a reliable 2-circuit wall-mounted gas boiler with a closed firebox. A separate heat exchanger increases the efficiency of the entire system and extends the life of the equipment. The useful power of this unit is 25 kW, which is enough to heat an apartment or a small country house, the area of ​​\u200b\u200bwhich does not exceed 240 square meters. At the same time, the maximum temperature of the coolant in the heating system reaches 85 degrees Celsius.

The equipment is highly productive. Ariston bs II 24 ff is capable of producing 13.6 liters of hot water per minute at a temperature of 25 degrees. And the efficiency reaches 93%. For this class of equipment, such a high efficiency is a worthy indicator.

The device is easy to install, so it is not necessary to entrust this task to specialists. If you are confident in your own skills and want to mount Ariston bs 24 ff on your own with the instructions that come with the equipment, you can easily do it.

But do not forget that an experienced specialist with one hundred percent probability will be able to install the equipment without any errors, which will protect you from the possible withdrawal of equipment from warranty service, which the manufacturer has every right to do in case of violation of any standards. The instructions for Ariston bs 24 ff are clear and comprehensive enough for the wizard to cope with the installation without problems.

Characteristics and operation of the boiler Ariston BS ii 24 ff

The double-circuit gas boiler Ariston BS 24 FF is a versatile and compact mini-boiler room containing all the necessary components.

A wall-mounted boiler is used to heat small rooms with an area of ​​50-240 m2, in which it is impossible to install a floor heater, as well as to supply an object with hot water.

Rice. 1. Control panel of the gas wall-mounted boiler Ariston BS ii 24 ff

1. Green LEDs showing temperature and alarms, 2 . ON/OFF button, 3. Green LED ON/OFF, 4. Manometer (pressure in the heating circuit), 5. Yellow LED for signaling anomalies in the smoke exhaust system, 6. Summer/winter switch - Heating system temperature controller, 7. Domestic hot water temperature controller, 8. Socket for programming timer (option), 9. Red LED - column blocking signal, 10. Reset button / Chimney cleaning function, 11. Red LED for overheating signaling

Rice. 2. General view of the gas wall-mounted boiler Ariston BS 24 ff

1. Flue gas outlet, 2. Pressure switch, 3. Condensate trap, 4. Primary heat exchanger, 5. Overheating thermostat, 6. Heating circuit flow temperature sensor, 7. Burner, 8. Ignition electrodes, 9. Ignition device, 10 Gas valve, 12. Heating circuit safety valve (3 bar), 13. Secondary heat exchanger, 14. Drain cock, 15. DHW flow sensor, 16. Charging cock, 17. Heating circuit filter, 18. Circulation pump with air vent , 19. Heating return temperature sensor, 20. Three-way valve actuator, 21. Flame control electrode, 22. Mineral fiber combustion chamber thermal insulation panel, 23. Combustion chamber, 24. Expansion tank, 25. Fan, 26. Point analysis of combustion products

Technical characteristics of the gas boiler Ariston BS ii 24 ff

Rated thermal power for the heating circuit, no more / no less than (Hi) kW - 25.8 / 11.0

Rated thermal power for the heating circuit, not more / not less than (Hs) kW - 28.7 / 12.2

Output heat output (heating mode), no more / no less than kW - 24.2 / 9.8

Fuel combustion efficiency (measured at the outlet of combustion products), Hi / Hs% - 94.5

Efficiency at rated power (60/80 °C), Hi/Hs % - 93.8 / 84.5

Efficiency at 30% of nominal power (47 °C), Hi/Hs% - 93.6 / 84.3

Efficiency at minimum power, Hi / Hs% - 89.2 / 80.3

Heat loss through the chimney with the burner on % - 5.5

Heat loss through the chimney with the burner off % - 0.4

Residual pressure in the circuit Pa - 100

Flue gas temperature (G20) °C - 105

The amount of combustion products, not more than (G20) m3 / h - 56.8

Excess air % - 72

Maximum hydraulic resistance (dT=20°C) mbar - 200

Residual pressure in the circuit bar - 0.25

Expansion tank pressure bar - 1

Maximum pressure in the circuit bar - 3

Expansion tank volume l - 8

Water temperature in the heating circuit, not more / not less than ° C - 85 / 35

Water temperature in the DHW circuit, not more / not less than °C - 60 / 36

Flow rate in the DHW circuit (after 10 min at dT=30 °C) l/min - 11.3

Flow rate in the DHW circuit at dT=25 °C l/min - 13.6

Flow in the DHW circuit at dT=35 °C l/min - 9.7

Water consumption in the DHW circuit, not less than l / min - 1.7

Pressure in the DHW circuit, no more than bar - 7

Voltage and frequency V/Hz - 230/50

Power consumption W - 92

Protection class °C +5

Weight kg - 30

Dimensions (W x H x D) mm - 400/770/315

Commissioning of the gas boiler Ariston BS ii 24 ff

To turn on the boiler, press the on/off button on the control panel.

Power supply - Make sure that the voltage and frequency in the power supply network correspond to those indicated on the nameplate of the wall-mounted boiler Ariston BS 24 ff.

Gas supply:

Make sure that the type of gas in the system corresponds to that indicated on the boiler nameplate.

Open windows and doors.

Make sure there are no open flames or sources of sparks.

Check the gas burner part of the gas wall-mounted boiler Ariston BS ii 24 ff for leaks. To do this, with the gas supply valve closed (switched off), close and reopen the main gas valve. Within 10 minutes, the meter should not register gas flow.

Filling the heating circuit:

Open the air valves on the radiators of the heating circuit.

Raise the cap of the automatic air vent of the circulation pump.

Gradually open the boiler feed valve and close the air valves on the radiators of the heating circuit until water starts to come out.

When the pressure according to the pressure gauge reaches 0.1 - 0.15 MPa (1 - 1.5 bar), turn off the boiler feed valve.

First commissioning

Make sure that:

The main gas valve is closed.

Electrical connections completed. Check again that the green (yellow) wire is connected to a good ground.

Lift the cap of the automatic air vent of the circulation pump with a screwdriver.

Make sure that the pressure in the system (as indicated by the manometer) is greater than 1 bar.

Turn on the column (by pressing the on / off button) and select the stand-by mode, there is no request for either domestic hot water or the heating system.

Start the venting cycle by pressing the MODE button for 10 seconds. The column will begin an evacuation cycle of approximately 7 minutes.

At the end, check whether the air is completely removed from the heating circuit, if not, repeat the cycle.

Bleed air from radiators.

Open the cold water supply valve, wait until the air is completely removed from the circuit.

The chimney must be properly sized and free of obstructions for the removal of combustion products.

Make sure that the necessary ventilation holes in the room are open (they should be in a type B installation).

Open the gas valve, check all seals for tightness: the meter should not show gas flow. Repair if there are leaks.

Start the Ariston BS 24 ff boiler in winter (heating) or summer (DHW) operating mode.

Automatic forced air removal mode

To start the mode, press and hold the MODE button for 10 s. The duration of the cycle is approximately 7 minutes.

To interrupt the cycle, press the MODE button. If necessary, the cycle can be restarted.

First make sure that the boiler is in standby mode, i.e. without supply to the DHW and heating circuits.

Checking gas parameters

Remove the front decorative panel and lower the control panel of the Ariston BS ii 24 ff boiler.

Inlet pressure check:

Loosen the screw and insert the pressure gauge connection tube into the pressure tap.

Start the boiler at maximum power in the “Chimney sweep” mode (press the RESET button and hold for 10 s, the display in position 27 shows “L- -“). The gas inlet pressure must correspond to the nominal for this type of gas.

After 10 minutes or by pressing the button again, the boiler exits the "Chimney sweep" mode.

Checking the maximum power of the gas wall-mounted boiler Ariston BS 24 ff:

To check the maximum power, loosen the screw and connect the manometer tube to the pressure tap.

Start the boiler in the “Chimney sweep” mode: press the RESET button and hold for 10 s, the display shows “L- - “; for the boiler to operate at maximum DHW output, press the 1 + button. The display shows “L- - “.

The gas pressure at the inlet must correspond to that indicated for this type of gas in the summary table of parameters, depending on the type of gas. Otherwise, remove the protective cap and tighten or loosen the adjusting screw.

After checking, tighten the screw and make sure it is tight.

Replace the protective cap of the regulator.

The boiler exits the "Chimney sweep" mode automatically after 10 minutes or immediately by pressing the RESET button.

Checking the minimum power of the gas wall-mounted boiler Ariston BS 24 ff:

To check the minimum power, loosen the screw and connect the manometer tube to the pressure tap.

Disconnect the combustion chamber compensator tube.

Start the boiler in the "Chimney sweep" mode: press the RESET button and hold for 10 s. The display shows "t". To make the boiler work at minimum power, press button 1 +.

The display shows "L- - ".

Disconnect the wire from the pressure regulator (modulator).

The gas pressure at the inlet must correspond to that indicated for this type of gas in the summary table of parameters, depending on the type of gas. Otherwise, adjust it with a screw.

After checking, tighten the screw and make sure it is tight.

Connect the wire to the pressure regulator.

Connect the compensator tube.

The Ariston BS ii 24 ff boiler exits the “Chimney sweep” mode after 10 minutes automatically or immediately by pressing the RESET button.

__________________________________________________________________________

__________________________________________________________________________

__________________________________________________________________________

__________________________________________________________________________

_______________________________________________________________________________

__________________________________________________________________________

OPERATION AND REPAIR OF BOILERS

Gas boilers Ariston appeared on the Russian heating market among the first. Largely due to its world-famous brand, this Italian manufacturer of gas heating equipment quickly managed to "win" the domestic buyer and achieve high sales dynamics.

Ariston gas boiler, reviews of the owners of which help to better decide on a purchase, we can often find on different sites and in online stores. A modern set of functions and good design, good technical characteristics and a large selection of models are a clear advantage when buying a device, even despite the somewhat inflated prices.

But today we will consider not only the pros, but also the disadvantages of Ariston mounted boilers, having studied their device and features of the models, using the instruction manual, photos, customer and specialist reviews.

Model range of wall-mounted double-circuit gas boilers Ariston

The Italian manufacturer is represented on the Russian market by a fairly wide range of wall-mounted gas boilers. We can meet Ariston double-circuit and single-circuit gas boilers, traditional and condensing, with and without a storage boiler.

In addition, like most competitors, Ariston gas heating boilers are available with a closed combustion chamber (turbocharged) and open (atmospheric). For devices with forced draft, a chimney outlet is provided horizontally through the wall, additionally buying a special one for it with a pipe diameter of 60/100 mm.

Gas boilers Ariston: product range

To date, the Italian company produces several modifications of its traditional double-circuit gas boilers:

- Ariston BS 15 FF, 24 FF and 24 II;

- Ariston Cares X 15 CF and 15 FF, 18 FF, 24 CF and 24FF;

- Ariston HS 15 CF and 15 FF, 18 FF, 24 CF and 24FF;

- Ariston Clas X 24 FF, 28 FF and 24 CF;

- Ariston Egis Plus and Premium;

— Ariston Genus X;

— Ariston Alteas X.

The single-circuit gas boiler Ariston with the possibility of connecting an indirect heating boiler is represented by only one model “Ariston Cares X System” with a power of 15 to 32 kW with closed and open combustion chambers.

Double-circuit gas boilers Ariston are available with a capacity of 15, 18, 24 and 28 kW. The most popular modification is a 24 kW device that can heat a house up to 200-230 m2. Turbocharged boilers have the symbols FF in their name, atmospheric - CF.

Features of the Ariston Cares X gas boiler: instructions, device

Ariston Cares X 24FF

This model is one of the budget ones in the price segment up to 35,000 rubles, and due to this, the most popular, judging by the number of reviews from the owners of the Ariston boiler. But even for a small amount, the buyer receives a modern wall-mounted gas boiler that has a nice appearance, button control and an LCD display, as well as a whole range of necessary functions.

As on all models of Ariston wall-mounted gas boilers, the Cares X series devices are equipped with: Wilo with automatic air vent and gas valve SIT. In addition, they are equipped with a boiler safety group and a membrane expansion tank of 8 liters.

The gas boiler "Ariston Cares X" has two heat exchangers: the main copper with aluminum coating for the heating circuit and the compact secondary stainless steel for the DHW circuit. The capacity of this secondary heat exchanger for the 24 kW Ariston Cares X 24 FF (CF) models is 13.6 l/min. Consider the device of a double-circuit gas boiler Ariston Cares X 24 FF NG:

Double-circuit gas boiler Ariston

1 - outlet for a coaxial chimney;
2 - pneumatic relay;
3 - collector for condensate;
4 - main heat exchanger for heating;
6 and 19 - temperature sensors at the inlet and outlet of the heating circuit;
7 - Polidoro gas burner;
8 - ignition electrodes;
9 - secondary heat exchanger for hot water supply;
10 - gas valve SIT;
11 - safety valve 3 bar;
12 - ignition block;
13 - pressure gauge;
14 - tap for feeding the heating system;
15 - filter;
16 - DHW flow sensor;
17 - Wilo circulation pump;
18 - pressure switch;
20 - three-way valve drive;
21 - burner flame control sensor;
22 - combustion chamber;
23 - expansion tank;
24 - fan (turbine).

The "winter-summer" mode and room thermostat help to reduce gas costs. In summer, the boiler can only work on the DHW circuit, while in winter the device works economically thanks to the modulating gas burner. The room thermostat is not included in the boiler, but it can always be purchased separately.

Boilers of this series have in their device temperature sensors installed on the "supply" and "return", running water temperatures, flame and draft control sensors. In addition, the devices are equipped with a security system: protection against low water pressure, protection against freezing of the system and its overheating.

The Ariston gas boiler is adapted to Russian conditions, such as power surges, low gas pressure and low air temperature outside the window. But, even despite this, the manufacturer himself recommends connecting the boiler through.

This recommendation applies not only to boilers of this brand, but also to other wall-mounted gas boilers of any manufacturer. If the electronic board of the boiler suddenly fails due to a power surge, then this case will not be guaranteed.

Technical characteristics of the double-circuit gas boiler Ariston Cares X

Ariston gas boiler: technical specifications

Advantages of Ariston gas boilers:

- a very large selection of models;
- a prestigious global brand;
- Italian assembly;
- two heat exchangers;
— adaptation to Russian conditions.

Disadvantages of gas boilers Ariston:

- overcharge;
- components made in China;
- the main direction of the company is the production of storage water heaters.

Dual circuit gas boilers Ariston

BS gas heating boilers are the best equipment for those who understand economy. The 24 kW wall-mounted boiler for heating and hot water supply is compact in size, light in weight, has two reliable separate heat exchangers and a unique hydraulic group.

The new equipment is distinguished by an affordable price, which makes it an extremely attractive product on the heating market.

Recommended for apartment heating and hot water supply in high-rise city buildings. Its use will reduce the cost of each consumer for heating (in comparison with the existing central heating) by about 2-3 times. Having your own boiler, you decide when and what temperature it needs to maintain in the apartment. Individual comfort, perfect value for money!

Main advantages:

fully adapted for Russia - work at reduced gas pressure (up to 5 mbar), low pressure and water flow;

resistance to voltage drops;

built-in condensate collector;

operation at low outdoor temperature (up to -52°С)

analog control panel with temperature display

the possibility of reducing the power for heating (with the same power for hot water) and the function of switching on delay

function of continuous electronic modulation of the burner flame

anti-freeze, scaling and blocking functions of the circulation pump and 3-way valve

self-diagnosis function

primary heat exchanger made of copper with a protective coating,

secondary stainless steel plate heat exchanger

durable stainless steel burner with safety feature

heavy-duty composite hydraulic group, motorized three-way valve

2 ultra-precise ntc temperature sensors

2 mechanical cleaning filters - in the heating and hot water circuit

expansion tank 8 l.

self-diagnosis function

Possibility to connect t-control and room thermostat

withdrawn from sale

• Gas heating boilers bs are the best equipment for those who understand economy
• wall-mounted boiler with a capacity of 24 kW for heating and hot water supply is compact, lightweight, has two reliable separate heat exchangers and a unique hydraulic group
• Fully adapted for Russia - operation at reduced gas pressure (up to 5 mbar), low pressure and water flow
• Voltage surge resistance
• Built-in condensate trap
• Operation at low outdoor temperature (up to -52°С)
• Analogue control panel with temperature display
• Possibility to reduce the heating power (at the same DHW power) and switch-on delay function
• Function of continuous electronic modulation of the burner flame
• Frost protection, scaling and blocking functions of the circulation pump and 3-way valve
• Self-diagnosis function
• Protective coated copper primary heat exchanger
• Durable stainless steel burner with safety feature
• Heavy duty composite hydraulic group, motorized 3-way valve
• 2 ultra-precise ntc temperature sensors
• 2 mechanical cleaning filters - in the heating and hot water circuit
• Expansion tank 8 l.
• Possibility to connect t-control and room thermostat

Article 3300286 Type of fuel Gas Type of installation Wall-mounted Power, kW 25.8 Heat load, kW 23.7 Heat exchanger material copper power, W 76 Average efficiency, % 91.9 Boiler water temperature, °C 82 Automation included yes Display no Heating temperature control Mechanical DHW yes DHW output, l/min 13.6 Built-in circulation pump yes Expansion tank capacity, l 8 Water connection ( straight line), G” 1/2 Water connection (return line), G” 3/4 Gas connection, G” 3/4 Nominal gas pressure, mbar 20 Natural gas consumption, m3/h 2.71 Chimney Ø, mm 130 Height, mm 770 Width, mm 400 Depth, mm 315 Weight without water, kg 30 Country of origin Italy Warranty 2 years

Type of fuel

The types of fuels of heating boilers are divided into gaseous, liquid, solid or substance burned to produce heat.
Among heating boilers, electric boilers can also be placed in a separate group - the most environmentally friendly of all types of boilers.
The cheapest type of fuel in Russia today is natural gas. This is followed by solid fuels, electricity and diesel fuel.

Nominal gas pressure, mbar

Nominal gas pressure (mbar) - gas pressure at which the boiler provides nameplate heat output. In passports for imported boilers, gas pressure is indicated in millibars.
According to Russian standards, low-pressure gas pipelines are used to supply gas to residential buildings. In the gas pipeline, the pressure should not exceed 0.003(0.03) MPa (kg/cm2) or 30 mbar.
The gas pressure supplied to the burner is always indicated in the boiler passport and is regulated during commissioning by service specialists.

Consumption of natural gas, cubic meters / h

Natural gas consumption (cub.m/h) - the amount of gas used by the boiler plant during the operation of the burner.
In addition to the traditional insulation of the building and pipelines, gas consumption for heating can be significantly reduced through the use of boiler automation with outdoor temperature control, boilers with modulating burners and the use of condensing boilers with low-temperature heating systems

Ø chimney, mm

Ø chimney, mm - minimum diameter of flue pipes and chimney. This size is indicated in the boiler passport.

Underestimation of the cross-sectional area of ​​the chimney Absolutely forbidden!

With household wall-mounted gas boilers with a fan burner, coaxial (pipe in pipe) chimneys are used, which allow fresh air to be supplied to the boiler and exhaust gases to be removed from the boiler.

Weight without water, kg

Weight without water (kg) - passport weight of the boiler without filling with coolant and water.

Mounting

Boiler installation includes:

Installing and fixing the boiler in place;

Connecting the boiler to a central chimney or connecting a wall passage kit;

Connecting the boiler to heating pipes;

Installation of protective equipment (safety group, expansion tank)

Installation of a coarse filter;

Drain valve installation;

Make-up line connection;

If necessary, installation of a boiler pump, mixing pump, hydraulic separator, distribution manifold;

If necessary, partial assembly / disassembly of the boiler

Installation and connection of one heating group (each subsequent - 5000 rubles);

Filling the heating system with coolant;

Pressurization of the heating system.

Water heater installation includes:

Installing and fixing the water heater in place;

The device of a direct loading line from the boiler with its own pump;

Connecting the water heater to cold and hot water lines;

Arrangement, if necessary, of a recirculation line;

Installation of protective equipment (safety group, expansion tank);

Drain valve installation;

Installation of valves and instrumentation;

If necessary, install a heat-insulating casing;

Filling the water supply system with water;

Filling the heat exchanger line with coolant;

Pressure testing of heating and water supply systems.

Commissioning

Commissioning works include:

Checking the correct installation of all equipment

Checking the system for leaks

Grounding check

Connecting the boiler to the gas main (diesel)

Installation and wiring of weather-dependent automation (if available, additionally 6,000 rubles + 1,000 rubles for each additional circuit)

Automation setting

Setting the combustion process

Checking and adjusting the operation of the boiler in all modes

Commissioning also includes a detailed briefing of persons responsible for the operation of the boiler plant.

After commissioning, the equipment is put under warranty.

Annual service

Service includes :

Diagnostics of boiler equipment

Make-up of the system, pumping of expansion tanks (if necessary and if service valves are available)

Cleaning the combustion chamber of the boiler unit

Control and adjustment work on the burner

Control and adjustment work on the automation system

Mud filter cleaning

Prompt service on emergency calls of the Customer (departure, diagnostics, repair)

The cost of the annual service includes the cost of the listed works and does not include the cost of spare parts, which are supplied free of charge under warranty or for a fee. Annual maintenance is a prerequisite for maintaining warranty obligations.