The lightning on the coat diverges what to do. How to fix a zipper on a bag? Sew on a new lock

The zipper is a universal fastener. plastic zipper most often placed on a bag, metal - on jeans, narrow secret - on a skirt or dress. This clasp holds perfectly, saves time. The only pity is that zippers too often break down. In a hurry, the slider was pulled too hard, when fastening, they grabbed a fabric or thread - and the lock was damaged. Fussing around a damaged zipper, for example, on jeans, is not worth it. Fix the zipper if it breaks, quite possible. True, not as fast as they broke. Take a breath-exhale in order to calm down and not cripple the castle even more, and proceed to repair.

Ways to restore lightning

Stuck elements from the zipper are carefully removed. To do this, stretch the lock a little forward or backward (where it can move), and pull out the extra parts. Pulling and pulling too hard means breaking completely and damaging the fabric. In this case, accuracy of movements is important.

Zipper on the bag refuses to go - neither forward nor backward - this is a signal that something more serious and solid is stuck inside the lock than fabric fibers. Most likely the zipper will need to be replaced. Or say goodbye to the slider - remove it with the help of the rough intervention of carpentry tools, and put in a new one.

How to fix a lightning if it diverges? With the halves of the zipper dispersed, you need to return the slider to its original position - to the beginning of the zipper - and slightly squeeze it with pliers towards the center of the part. If the teeth do not interlock when fastening, the internal mechanism of the lock has weakened. But too much pressure on the slider is not recommended. Dents will remain on top, and the lock will stop fastening, will not “go” up. A similar operation, if there are no pliers at hand, can be carried out with a hammer, lightly tapping on the lock.

If a lightning broke in the middle, you are in a hurry and you urgently need to fix it, fasten the zipper, connecting the teeth with your hands. Are the teeth connected? Now with pliers we squeeze them gently to fix the result. Unfortunately, this clasp will eventually have to be replaced.

In a situation where the slider (dog) jumped out of the fastener, you can insert it back with a knife or pliers. Gently open the slider, insert it into the zipper, and then squeeze it with pliers, but without force, so as not to damage it.

Sometimes due to lack of lubrication, not machine: will remain greasy spots. Lubricate the lightning with a paraffin, wax candle or pencil lead - and order: the slider slides freely over the teeth.

The teeth that have fallen out can no longer be restored, even in a metal zipper, even in a plastic one. The latter, by the way, wear out faster: the material is not so durable, and are erased during operation. "Toothless" lightning without options will have to be altered.

The slider that jumped out of the castle will first have to be inserted into place. Sew up the edge so that the situation does not repeat itself. Restore the lock by moving the slider. What to do if the slider itself is broken or, as it is also called, zip dog?

The runner broke, what should I do?

A broken slider, a dog with which we unzip and fasten the zipper, must be replaced. They are sold in the departments for needlewomen, but you can do it yourself. On the hastily you can use the usual paper clip or make a slider out of wire and Velcro. How to fix a zipper slider on a bag, see the video:

Zipper on jeans, bag, jacket, which has been repaired, will serve you for some more time. It all depends on how you treat her.

A zipper is a closure that is present on many types of clothing, and is also used on shoes, bed linen and bags. Sooner or later, everyone faces problems in the operation of the castle. Long-term use of the lock, initially low-quality product or problems to be solved - we will figure out what is the cause of the breakdown and how to solve it.

Before proceeding with the repair, you should find out what the key problem is. Perhaps it can be solved at home without the cost of professional repair. Among the most common causes of broken lightning:

a weak slider that cannot connect the teeth of the lock together, which causes the lightning to diverge;
too much tight slider, because of which the zipper jams and does not fasten or fastens very tightly;
divergence of the zipper after fastening. Just like in the first case, the problem lies in the weakness of the slider.

How to fix a zipper depending on the cause of the breakdown

All listed problems with a lock are solvable at home and do not require complete replacement castle. For repairs, you may need pliers, grease for locks, a slider and paraffin.

Attention!

In addition to the fact that the slider can be purchased at specialized stores, it can also be removed from unnecessary old locks or clothes. Focus on the required size.

What to do if the lightning sticks

If the lightning sticks, stops moving or breaks the teeth of the lock, then perhaps the reason lies in the high friction. The issue is easily solved - the lock needs to be lubricated. Specialty stores sell lubricants designed specifically for runners. If this is not possible, then you can use any improvised means, for example, a piece of unsalted bacon or paraffin. Paraffin does not leave such traces as lard, so it is more preferable.

Rub the closed zipper with a piece of paraffin, being careful not to damage the teeth.
Fasten and unfasten the zipper several times.
Remove excess paraffin with a tissue.

After these actions, the lightning will not jam, and will last for a long time.

What to do if the lock on the jacket diverges

Question from weak runner is the easiest to solve and does not require replacement of the zipper. Open the zipper and try to fasten it. Ideally, the slider should move smoothly, without effort. If the lightning diverges, then try to lightly press the slider with pliers, if this does not help, then increase the pressure.

Important!

If the slider is pressed down too hard, then the lightning will then only have to be thrown away. Therefore, move carefully, step by step, increasing the pressure.

What to do if the base of the zipper is broken

If the lower part of the lock has broken to such an extent that it seems shaggy, then it is better to replace it - such a lock will definitely not last long. However, it is possible to extend the life of the foundation of the castle, which is especially important if you do not have the time or opportunity to change the castle now. We need a simple nail polish for this, it is better to choose a colorless or matching color with a lock. Open the zipper and carefully fit the torn pieces, then apply nail polish to them. Please note that it is impossible to do with one layer here, the varnish should soak the lock well and, when dried, tightly glue the broken parts together. Dry the lock thoroughly before use.

Note!

If the option with nail polish is not very pretty for you, then you can use superglue in a similar way.

How to replace a jacket zip puller

If all else fails, then the only option is to replace the slider. You can either buy a dog or remove it from any old thing, as long as it has the same size as the previous slider. Procedure:

Remove the broken slider. Be careful - the teeth break easily - first lift one part of the dog, then release the second.
Open the edges of the new dog in the same way, but do not overdo it so as not to break it. You can use a thick needle or scissors.
Install the pawl on the lock and gently press it with pliers.

Carefully!

Too much pressure can break the pawl, and a weak one will cause the lock to constantly diverge. Proceed with caution.

After installing a new slider, open and close the lock several times, making sure that the pawl moves smoothly and the lock does not diverge.

How to replace a zipper on a jacket

Replacing a lock on a jacket is quite difficult for a simple layman, especially if you have not done this before. It is best to take a lock or jacket and come with them to a sewing store so that you pick up a lock by color and size. At the same time, the old zipper is torn off, and the new one is sewn with a machine in its place. The top edge is cut in proportion to the length. However, if you are not sure about own forces, then it is best to contact a professional seamstress.

Repairing a lock or slider is quite simple - there are enough available tools for this, and you can do it at home. However, not all methods are long-term, in some cases the castle can no longer be saved. Therefore, you should not delay replacing the lightning, so that later it does not let you down at the most inopportune moment.

Zip fasteners are found today on clothes, shoes, home textiles, sports equipment and a variety of accessories. Their main advantages are ease of use combined with aesthetic appearance. But, unfortunately, such fasteners sometimes break. if it diverges, with your own hands?

Do not rush to carry the item for repair!

A broken clasp on an expensive item can be seriously upsetting. But before deciding whether to throw away a damaged item or visit a workshop, do not be too lazy to carefully examine the affected lightning. You can repair it yourself and very quickly, provided that the coil or teeth are not seriously damaged. Move the slider to the beginning of the fastener and carefully squeeze its edges with pliers alternately on each side. Do not put pressure on the jumper located in the middle, it can easily break under this impact. How to fix a zipper if it diverges, but there were no pliers at hand? A small hammer or any tool that can replace it will help you out. Lightly tap the edges of the slider so that they tighten. Usually this repair option allows you to save the clasp, which has just begun to diverge. But what to do if even the zipper on the jacket is compressed? How to fix the clasp in case of more serious breakdowns?

Do-it-yourself zipper teeth repair

Sometimes the lightning begins to diverge due to the breakage of one tooth or several. The easiest repair option is to find a similar donor clasp. Be sure to compare the size of the teeth, they should be the same. From the donor zipper must be removed right amount elements using tweezers or a small flathead screwdriver. Then transfer and fix the teeth on the clasp to be repaired. Attention: when placing the cloves, it is important to accurately observe the intervals of gaps between them. For a strong fixation, simply clamp the elements with pliers. How to fix a zipper if it diverges due to the lack of a tooth, and a donor lock right size No? You can try to fill the gap with a suitable plastic fragment. If the fastener is small, just cut off a piece of suitable length from cotton swab. Then cut the workpiece lengthwise and try it on with a zipper. You can fix the tooth substitute by sewing it with dense threads to the textile base of the zipper.

Repair or sew?

How to fix a zipper if it diverges near its end? If the fastener functions for most of its length and begins to diverge only at the very end, you should think about the advisability of repairing it. Depending on the specifics of the cut of the product and the location of the zipper, it can be much more convenient and easier to simply sew it up at the point of breakage. Pick up the threads to match the textile part of the castle. And sew in a few stitches a zipper a few teeth above the place where it usually diverges. If this part of the lock is not visible, you can fasten it with a metal clerical staple to strengthen the fixation. This repair method will help you out if the zipper on your boot is broken. How to fix a lock quickly at home, you now know. But what needs to be done to ensure that lightning breaks as rarely as possible?

Secrets of zipper care and breakdown prevention

Try to always slowly and carefully unfasten and fasten the lock. It is especially important to explain to children that lightning does not tolerate sudden jerks and the use of brute force. Align the edges of the fastener before fastening. On some products, the zipper may bulge - it is advisable to try to level it and pull it. If the fastener has become very tight, it makes sense to lubricate it. For this, a bar of soap or wax candle- just rub the teeth on each side and enjoy the ease of unfastening.

Zippers on shoes should be cleaned regularly with a small brush. Fasteners of this type are especially afraid of getting dirt and sand. Completely different “weaknesses” of lightning on clothes. Before washing, they must be fastened and the product turned inside out. When ironing, try not to touch the fastener with the iron. Following these simple rules, you will most likely never run into problems. But if the zipper on the bag still broke, you now know how to fix it.

Zippers are the most popular fasteners for clothes, shoes, bags and backpacks. But she is also the most vulnerable. It often happens that the bag looks like new, but you won’t wear it if the teeth have fallen out or the “dog” has fallen apart. And what to do in such cases? Run to the master and change? Sometimes you can't do without it. But in many cases, you can deal with the problem yourself. How to fix a zipper on a bag, wallet or briefcase? Let's discuss this.

Two words about fasteners

One-piece zippers are usually put in bags and backpacks. They are:

Metallic. They are more reliable, but not everyone likes the way they look. On an elegant evening bag, such a clasp looks rough. However, metal zippers have their advantages - they break less often, and if problems arise, it can be easier to deal with them.
Plastic. Such a zipper is good in that it can be matched exactly to the color of the material and sewn in so that it is completely invisible without any valve. Unfortunately, plastic fasteners break more often, and it is not always possible to fix them. Thin zippers are especially unreliable, in which a long plastic spring is inserted instead of teeth.

Major problems with fasteners

Before you fix the lock on the bag, it is very useful to understand what exactly happened. The most frequent problems:

the slider moves freely, but the zipper does not fasten;
the slider walks tight or does not move at all;
the slider is stuck in the middle, behind it - the lightning has dispersed;
the runner jumped off;
the tongue fell off the runner;
the teeth fell out;
the teeth are not straight.

The bag does not close

How to fix a zipper on a backpack or bag, if the teeth are all in place, the slider, aka “dog”, seems to be intact (in any case, nothing has fallen off from it), and the compartment is wide open? This means that the slider is loose.

Important! If you carefully examine this detail, you will see that it consists of two plates connected by a bridge with narrow sides. The plates are at some distance from each other, the sides usually do not touch, but the gap between them is small. If you often use the bag, the jumper unbends, the gap increases, that's all. Therefore, it is necessary to return the plates to their original position, for which such a simple object as pliers serves.

It is necessary to act very carefully to repair the zipper on the bag, because the material from which the fasteners are made is quite fragile:

Move the slider to the beginning of the lightning.
Set it straight.
Gently squeeze with pliers so that the sides are as close to each other as possible.
Try lightning.

If nothing happened, this does not mean at all that you need to push harder. It is best to replace the slider. You can buy a new one in a sewing store, taking the old one with you as a sample.

We remove the slider

This insidious detail sometimes jumps off only one side of the zipper. This, of course, does not make it any easier - the bag still does not fasten.

Important! Metal and plastic "dogs" jump off with equal success.

You can try to put the part in place. For this you need:

awl;
pliers;
sheet of white paper.

Important! The awl can be successfully replaced with another sharp object - a thick needle, nail scissors, even nail clippers. You can do without pliers if there is a smaller tool with which you can clamp the limiters. And the sheet is needed so that the limiters are not lost while you are fiddling with the slider.

How to proceed to fix the lock on the bag:

Carefully fold back with sharp object teeth of the limiter located on the side on which the slider remained.
Remove the limiter - it is best to pry it off with a needle or awl.
Take off the dog.
Remove the second limiter.
Put the slider, swipe it to the beginning of the lightning and align.
Set the limiters - for this, the cloves must be bent again.

The zipper on the bag is broken - how to fix it?

Five minutes ago, the lock was closing normally, the slider reached the middle - and here you are, please, from your place, and even what seemed to be closed - dispersed. What to do if lightning diverges?

To begin with, gently, clove by clove, take the slider to the beginning: the main thing is not to make sudden movements, otherwise the teeth may fall out, and then there will be even more trouble with the repair.
Align the slider.
Rub the teeth with rosin or chalk.

Important! Unfortunately, the method is not very reliable, but for some time the bag will still serve you.

If the runner walks tight

Like any mechanism, lightning needs some care. Of course, it is not worth lubricating it with machine oil every day - it is generally contraindicated in this situation for all bags, except for leather ones. On other materials, this substance simply leaves stains. But it is successfully replaced:

wax;
stearin;
soft graphite pencil.

You can take, for example, a candle - any, except for tallow. Wax crayon is also suitable - by the way, you can choose one that matches the color. To fix the zipper on the bag in this way:

See if the thread has got into the slider - this happens more often with clothes, but it also happens with bags.
If there is thread, very carefully pull it out with a sharp object. It is possible that this is where all the problems will end.
If there is no thread, lubricate the “dog” with one of the indicated compounds. Wax should get between the plates.
Rub the teeth with the same composition.

If the tongue fell off

How to repair a zipper on a bag if the tongue has broken off or even fallen out? This is the simplest of the problems that the hostess of any bag or backpack can face. The part that disappeared in an unknown direction is successfully replaced with something similar - for example, a metal paper clip:

Bend the outer end of the paperclip slightly.
Insert it into the hole to which the tongue was clinging to the fold.
Bend again - you can even do this with your fingers, pliers are not needed in this situation.

In principle, a plastic paper clip can also work, it just breaks more easily, and it may turn out to be thicker than necessary.

If the teeth popped out

Over time, the teeth fall out. The lightning will most likely have to be changed, but you can still try to fix it. Sometimes it succeeds.

Option 1

If the zipper is plastic, a regular fishing line can help you out. It varies in thickness, but usually it does not play a role. The missing teeth can simply be “sewn on”:

Make a knot on the fishing line (you can just melt the tip).
Thread the line into a wide eyed needle.
Sew a few stitches "over the edge" where the teeth fell out.
Cut off the tip and melt it too so that it does not slip through the fabric.

Important! You have to be careful as the plastic melts too.

Option 2

FROM metal zipper this number will not work. You will need a second zipper with exactly the same teeth (which is why it is better not to throw away the old broken zippers, but put them in a box - it is not known when they may be needed).

We act like this:

Remove the desired number of teeth from the spare zipper.
Try to put them on the one in the bag - not everyone succeeds, but sometimes it still works out.
Align the teeth with a hammer.

If the teeth are at random

Sometimes the runner does not want to run because the tines that have bent into different sides. This grief is easy to help. You need:

awl or nail clippers;
small hammer (can be wooden):
plank (you can use a small cutting board, the main thing is that it is clean).

Align the teeth with tweezers or an awl so that they are parallel to each other.
Place a plank under the zipper.
Gently tap the protruding teeth with a hammer until they lock into place - usually two or three gentle blows are enough.

Most people are accustomed to such an indispensable thing as zippers, which help to fasten jackets, coats, boots, boots, trousers without any problems. Almost any thing in the wardrobe can be fastened with not buttons, but zippers. There are the most various colors and shades of lightning, differ only in their size and shape. They can be metal or plastic.

However, there are times when zippers break and most often this happens in children, when they put on a jacket many times a day, then take it off, then zip it up, then unzip it. As a result, the lower part of the zipper is loosened, which is inserted into the lock.

There are a few effective ways to help fix the zipper on the jacket.

Take regular nail polish and gently smear the frayed part until the polish soaks through the material and the zipper becomes rigid.
How to fix a zipper on a jacket?

This method allows you to fix the lightning quickly, but not for long.
Do exactly the same procedure with the disheveled part of the zipper, only use fast-curing glue instead of varnish. Here you need to be very careful, since the glue hardens very quickly, so it must be applied to the damaged part of the zipper in small portions. This method will allow the zipper to last longer than nail polish.

How to fix a zipper on a jacket?

If the zipper on the jacket diverges, then fixing it is very simple. You should use pliers: slightly squeeze the top and bottom of the zipper slider and the lock will stop diverge. Such an operation with a lightning slider can be performed only once. The next time you fix the zipper on your jacket, if it comes apart, you will have to replace the zipper slider with a new one.

How to fix a zipper on a jacket at the bottom?

The essence of such a repair is as follows. First of all, a faulty zipper should be carefully flogged from the jacket. As a rule, locks in insulated jackets are first sewn along the cuts of the side between the top and the lining of the product, and then sewn with finishing lines along the front side. Thus, you need to rip at least two lines for each of the halves of the zipper. Then you need to sweep, and then stitch new castle, after turning the product inside out, if the technology of its tailoring allows it. It will be most convenient to turn the product on the wrong side through the hole in the bottom seam of the lining of any of the sleeves of the jacket. After the zipper is stitched in, the jacket must be turned inside out. front side, sew a hole in the sleeve, and give one or finishing stitches along the clasp itself.

Categories

Popular