How to make a torch with your own hands, tips and tricks. How to make a torch with your own hands, tips and tricks An easy way to make a torch
During a hike, when you need to look for a way in the dark, but there is no lantern, or at a halt before going to bed at dusk, there is a need for lighting in order to prepare everything for the night. You can use the flame of a fire, but there is a more mobile light source - a torch.
In two video tutorials, see how to make a torch with your own hands using wood and others. auxiliary materials. A torch for lighting can be made using what is right under your feet.
empty tin can you need to fix it in a stick 40-50 cm long. On wounded spruce trunks, you can find resin in sufficient quantities to fill a lighting torch with this natural combustible material. If there is no resin, then it can be obtained using cuts on the bark of trees. Dry cones and birch bark should also be put in a jar. The lighting torch from the can is ready.
If there is no jar nearby, you can make a torch out of birch bark. To do this, you need to make an incision in the stick and insert pieces of birch bark into it. Birch bark gives a very bright and strong flame and is ideal for fast manufacturing torches.
Indian candle torch
The next way to make a torch is based on an Indian candle. It is completely wooden long burning, gives a very long and bright light, because it is based on large logs.
It is not as mobile as the previous one, but it is also easy to carry from place to place, and it is intended to illuminate the camp. To create a torch, it is better to use logs or whole thin logs from trees. conifers, so they are the most resinous. You also need a stake on which the burning part will be located. For kindling, you will need birch bark or other easily burning material suitable for lighting logs. To improve combustion on the inside of the logs with a knife or an ax, you need to make notches, stuff wood chips. We also add thin chips, splinters.
To tighten the candle, we use, if possible, a wire or a rope pre-moistened with water. The screed should be made as low as possible so that the flame does not reach it immediately. When the screed is ready, it is filled with kindling and set on fire.
And read how Africans get out of the situation when you need to light up your home. In the forest, an ax is always useful, thanks to which you can hang the tool on a backpack.
An easy way to make a torch
zen.yandex.ru
How to make a torch? A simple and angry recipe for everyone!
How to make a torch? Each of you asked this question in childhood, dreaming about adventures or at older ages, forgetting the flashlight at night. Torch is cheap, cheerful and very spectacular!
The main essence of the torch is that it is not the stick that should burn, but what is wrapped around it. Now you know more than 90% of people about torches! Move on?)
Look, we need a stick and filler. From the filler, any rope of natural origin, or fabric, is suitable. We wind the fabric on a stick and fix it tightly. (Really tightly) Either we fasten a couple of self-tapping screws, or we put on an iron rim. You need a tight grip.
Now we dip our torch into vegetable oil (any) and keep our torch there for about 2-3 hours. Now the torch is almost ready. You can make a thicket from below so that nothing drips into your hands, but this is optional.
In fact, at this stage it is already possible to light everyone like an adult, but there is another secret recipe.
We take kerosene, rubber-based rubber glue and liquid soap. We mix kerosene and glue 1 to 1, add a little soap. We shake it all up and put it on a torch. It will be great to burn!
The life of one fuse is about 70 minutes, so you should always have a spare with you! Careful with the mixture, it's almost Greek fire! Extinguishing is very difficult, it can catch fire even under water!
Two ways to make a torch
1 way
The first way to create a torch that can burn for 5-6 hours is very simple. To do this, we need chips from dry wood (preferably long logs obtained from splitting) or small branches, which are then gathered into a bundle.
We take several long chips or a bunch of thin branches and put dry moss in this space in the middle. Now you need to tie it all with wire. In principle, the torch is ready, we just have to soak it with resin or fat. We set it on fire and if everything is done correctly, then the torch will burn out for several hours. The length of such a torch is made from 50 centimeters to a meter, and the thickness is 10-15 centimeters.
2 way
The second way to create a torch is just a variation Finnish candle, only adapted not for cooking, but for lighting the territory.
We need a log or a thick branch. Choose the length that suits you best. On the one hand, we split the log or saw through it crosswise by about 15-20 centimeters. And insert the kindling into the hole obtained in the center. We kindle it and our torch flares up.
A thinner torch can simply be sharpened and stuck into the ground. And you can just put a thick one and it will burn. If necessary, torches can be easily transferred.
Torches have long been used by people for lighting, until one smart man did not discover the magic of electricity, and another did not invent the incandescent lamp. Now the torch is used as part of a show, on film sets or at themed events.
Popular topic - smoke torch but doing it at home is not very safe. But it’s easier to invent an ordinary torch, the main thing is to take into account all the recommendations and correctly implement them.
What is the device made of
The torch has only two parts - this is the base-holder and the burning part.
To figure out how to make a torch, let's start with the basics. In her role is a pole made of bamboo or wood. Why can't other materials be used? It's just uncomfortable. The material for burning is better fixed on the tree. Moreover, wood has low thermal conductivity, and if you take a metal rod, a burning torch will quickly heat it up. The handle, by the way, should be 2-4 centimeters in diameter and at least 50 centimeters in length.
burning part
Since we make a torch from improvised materials, we need two types of tools:
burning component.
The fabric should never be synthetic. Such a canvas melts and drips, which is fraught with burns. Only natural fabric and as coarse as possible: linen, cotton, asbestos fabric, felt, tow. Gauze may come in handy, but more on that later, when we deal with the manufacturing process and how to make a torch so that it does not fall apart during the combustion process. The length of the fabric strip should be about two meters, and the width should be 10-15 centimeters.
How to process fabrics
As a fuel, it is necessary to use just non-combustible substances. Most often choose wax and stearin. The latter is a component of ordinary soap, and household soap is best suited. Instead of wax, you can take pine resin, but since we are talking about improvised means, the second option is not so common in the box in the kitchen. Mixing proportions are as follows: for 1 kg of wax/resin, 100 grams of stearin.
There are other recipes as well. For example, a mixture that is relatively resistant to water: one part kerosene, one part rubber glue, a couple of spoons liquid soap. These ingredients will need to be thoroughly shaken together.
You can mix one to one rosin (pine resin) and wax (or paraffin).
A pleasant smell will give the following mixture: four parts of rosin, one part vegetable oil, five parts of paraffin or beeswax.
An interesting tip from the craftsmen: if you want the torch to repel mosquitoes, add a little lemon juice to the mixture when cooking.
Actually, the process
What to do, in principle, figured out. Now let's look at how to make a torch. There are two ways, and the second is preferable, but still we will talk about both.
Method number one.
We wrap the holder as tightly as possible with a cloth, lower it into ready solution on the long time to soak. After that, we take it out of the mixture, squeeze it strongly, expelling the air, and dry it.
Method number two.
We pre-soak the fabrics in the solution, squeeze it very hard, and then tightly wrap it on a stick. Dry again.
The second method is good for all wax and resin compounds for a simple reason: all ingredients must be mixed and dissolved in a water bath without boiling. If you then put a cloth-wrapped holder into it, most likely, the mixture will harden before the fabric is saturated with it. But for the option with a water-resistant torch, which uses a kerosene-based mixture, the first method is the best fit. That is, we choose the option of how to make a torch based on fuel.
By the way, about gauze. It was mentioned above that it can be useful. So, some advise using it in the second way, namely:
Divide the required length of fabric (two meters) into three or four parts;
After winding the strip, wrap it with a layer of gauze and wait until it dries;
Then repeat this with the rest of the strips.
Although, if you put in a lot of effort just wrapping the fabric tightly, it will also hold up well. If you are still worried about how to make the torch complete, you can additionally strengthen the material on the holder with wire - this should not affect the quality of combustion.
Smoke torch and skillful hands
If you need such a device, then it is better to purchase it at a pyrotechnic store. They are affordable enough for the consumer that there is no need to blow up your kitchen.
Since childhood I wanted do good torch . I tried it once and it didn't work out the way I wanted. Has since dropped it. And here again the question: “How to make a good torch from improvised means at home?” So we answer fully and taking into account personal experience, we replenish the section "Needlework" and the subsection ""
Torch - a lamp for long-term burning in any weather (such as wind, rain, snow, hail, hurricane, caves, ruins, etc.). Well, since soon (and the celebration of New Year's Eve), resistance to snow is also desirable - so that you can have a good time waving torches at the New Year's Eve. So a good torch:
- a) does not drip hot on hands / does not splash fuel when waving (and you will want to wave a torch 🙂)
- b) does not go out in the wind / waving and, if possible, in the rain.
On the contrary, a good torch:
- beautifully lit
- Burns for a long time (as long as needed)
- Safe
- From improvised means.
Having determined the "goodness" of the torch, let's move on to achieving it.
Torch components:
- holder (stick 2-4 cm in diameter and at least half a meter in length)
- low flammable / non-flammable base
- combustible mixture
- what holds the base on the stick (retainer)
The principle of operation is like a lamp: the fuel gradually goes to the fire through the base and gives light with warmth.
How to Make a Bad Torch (Don't Do This)
Immediately about the mistake: I took too combustible base (ordinary fabric), too combustible fuel (oil and gasoline), blotted it badly and wound the wire to the stick not very firmly.
As a result:
- Oil drips.
- The fabric burns out.
- Wire very bad hold burnt tissue.
- The fabric flies off when swung (well, that's safe).
So don't make torches like that 🙂
How to make a good torch at home
Torch materials
So, you need:
- Maximum non-combustible base.
- Fuel minimum.
- Maximum fixation of the base on a stick.
Now about practice. Base material:
- asbestos fabric (the plus is that it can be used repeatedly as the fuel burns out, the minus is that it is not very convenient to wind it),
- tightly twisted or stitched fabric,
- tow,
- hemp ropes,
- sackcloth
- felt.
Important: synthetics melt, drip on hands and friends. Therefore, polyethylene is not a torch. Even though it's on fire.
The thicker and denser the winding of the base, the longer burning. Tow is available in construction, plumbing stores and markets, fabric - in fabric and workwear stores.
fuel material:
- Machine oil
- Kerosene, petrol
- Vegetable oil
- Paraffin / candles
- 1 kg of wax per 100 g of stearin
- Pine resin (aka rosin): paraffin wax (1: 1)
- Mix for a good fire with pleasant smell: one part vegetable oil; five parts beeswax / paraffin; four parts of rosin; heat in a water bath and mix (the mixture is sticky, difficult to wash off; liquid only hot).
- A mixture that is sufficiently resistant to water: 1 part of kerosene; 1 part rubber-based adhesive; a couple of tablespoons of liquid soap; shake thoroughly.
Rosin - in shops for radio amateurs. Wax can usually be bought from those who sell honey. Kerosene - from hardware store; not solar.
Fixing material: steel wire.
Holder material: good thick stick (thin stick burns quickly). A good option stick preparation on video:
The branch is thin. A thicker stick is better. But for the experiment, this one will do. A big plus is that this way the wire will hold the base on the stick better than simple winding.
The procedure for making a good torch with your own hands
First approach how to make a torch:
- Wrap as tightly as possible.
- Dip for a long time in a container for impregnation, rinse to squeeze out air
- Squeeze carefully.
The second approach to making a torch:
- Soak loose material.
- Squeeze out unwound material.
- Wrap on a stick.
The second option is more to your liking, it is easier to manage the amount of fuel and remove excess; impregnation is also better (no air bubbles, etc.).
Tip: after winding, cover with a layer of dry cloth and wring out very well. Almost guaranteed there will be no drops of fuel.
Most home version creating a torch (considering that asbestos, rosin, etc. still need to be bought):
- Cut several candles lengthwise into thin strips.
- Wrap the fabric very tightly to the stick, laying strips from candles.
- Compress, melt a little, compress again - until it stops.
- Ignite with pleasure, but long.
There is advice to add a little potassium nitrate to the paraffin for quick ignition. I don't know, haven't tried it. Sounds kind of explosive.
And finally the easiest way to make a torch: split the stick, insert a piece of kindling for the fire into the split. Set fire.
Simple, fast, minimum hassle, maximum fire safety. The most it is for children 🙂
Tip: The ignition of the torch can be accelerated by pre-burning the torch to a uniform, deep black. This can save a few minutes during ignition.
So, a good torch with your own hands and at home is EASY to make.
Especially if you have everything you need at home 🙂
Based on materials from http://tgorod.go.ru/cgi-bin/board/topic.cgi?forum=11&topic=73 and http://www.tforum.info/forum/index.php?showtopic=2038
A lot of players with the onset of night in the game are interested in the issue of lighting. There are several ways to light up your home and surrounding area, and one of them is to create an improvised means. Actually, then all players can learn how to make a torch in Minecraft, and what it is for. It should be said right away that this item is well suited for lighting, as the resources to create it are quite affordable, and the illuminated area is large enough for a typical hideout in the game. Moreover, there are several varieties of torches, so it doesn't hurt to learn how to craft each of them so as not to get lost in different game situations.
Ordinary torch
It's worth starting simple. Creating a traditional torch from improvised resources is not difficult, and therefore it is so sought after by players. At the beginning of the game, you need to think about how you can defend against hostile creatures and survive. The first thing that comes to mind is the construction of a shelter or a full-fledged dwelling. It must be designed, equipped from the inside and illuminated. This is where the standard torch comes in handy. This tool has several purposes.
The most obvious is lighting up your home, the caves you explore, creating a hostile environment for enemy creatures, and getting rid of water and lava. Craftsmen in Minecraft even use a torch to get air while underwater, so this item should not be underestimated. To create a torch, you will need a stick and coal. The following describes where you can find the right ingredients for crafting.
Search for materials
As mentioned earlier, a good supply of sticks and coals will be required to create a torch (if you are going to a cave or have an extensive house). Where can you find these resources in the game world?
The vast and varied world of Minecraft is filled with different cubes and objects. Finding a specific item can be difficult for a novice player, so it's worth getting ready to learn new things about this game universe. However, the recipe for creating a torch is not difficult for a beginner, which is justified - without it, survival in the game will be somewhat inferior and dangerous.
You can get a stick by working with wooden blocks. This resource is available in most biomes where there are growing trees, so it is almost never difficult to find it on early stages games. All you need to do is break some wooden blocks, activate your inventory, place the mined material in one of the four cells, and you will get the boards. These, in turn, need to be moved to the place where you placed the logs in order to create sticks from them. Pretty simple recipe.
The next ingredient is charcoal. You can get it in several ways. This is the creation of a block from already existing materials, searching for ore in caves or treasure chests. All these methods are different from each other and it is worth choosing the easiest and most accessible to you at the moment. What needs to be done in order to obtain coal?
One way is to mine coal ore. This block is broken by any type of pickaxe and drops one unit of coal (in the case of an unenchanted tool). This is the easiest and most handy method in situations where you went to search for precious materials in a cave. Just collect coal blocks along the way so as not to be left without lighting.
Another way is to mine coal through burning a wood block. To do this, you need to create a stove, place several blocks of wood in it in the section of the burned material and fuel for it, and wait for the end of the process. Coal can also be found in treasuries (in chests on railway). After gaining access to the right resources, craft a torch by placing coal on top and sticks on the bottom. One charcoal produces four torches.
Redstone Torch
One of the possibilities minecraft games is to create a red torch. But why is it needed if it exists traditional look torches? Many players are interested in this issue, and it will be discussed later in the article.
In Minecraft, it is possible to create various mechanisms. The main role in them is played by Red Dust (Redstone). It performs the function connection cable and is used when crafting most of the mechanisms in this game. The activation of these mechanisms occurs due to the red torch. As a source of illumination, it is somewhat inferior to its carbon counterpart, but in terms of functionality it surpasses it.
How is the red torch created? The crafting recipe is not significantly different from the previously considered lighting method - just replace coal with red dust, and you can create your own torch to activate mechanisms and decorations for buildings.
red dust
Where can I get the necessary resource to create a red torch? It is located in the depths of caves approximately on the same level with lava. Break the redstone block with the iron pickaxe and you'll get the item you want!
We hope this article has been helpful to you. Share the material with your friends, leave a rating and comment!
Video
We are waiting for your comments, feel free to write!