Panther car alarm wiring diagram. Panther car alarm wiring diagram Additional sensor for pantera clk 355 alarm

As part of the update model range car alarms Pantera came out new model- CLK-355. This alarm is designed for use in Russian conditions and is intended for mass installation on domestic cars and popular foreign cars. According to this purpose, the developers have provided a wide range of software options and connection options, allowing the system to fully function on cars of different classes and manufacturers. The system uses an external interlock, a 40-amp relay with a ready-made block is included in the kit.
Like all "Panthers", this system is supplied in a complete package - a powerful 6-tone siren, a two-level shock sensor, installation "small things", LED, Valet switch. By the way, transactions with the "jack" at the request of the owner can be protected by a PIN code. The Valet mode itself can be turned on and off remotely, from the key fob. When enabled Valet mode The system generates warning signals each time the ignition is switched off.

Keychain transmitters have 4 buttons each, the security is turned on and off by different buttons. Unlike “little-button” key fobs, these key fobs make it as easy as possible to control the system, since they are not “overloaded” with various functions. The range of the key fobs is up to 40 m. In addition to the “standard” ones, the set of security features includes the immobilizer mode, arming with the engine running, arming without a key fob, two-stage disarming, arming with separate disabling of shock sensor zones. Remote (without the need for programming) inclusion of “silent” protection is also provided, when sound signals alarms are not sounded by the siren, but the connected lighting devices are flashing. This mode is "reinforced" by the possibility of connecting a pager to one of the programmable outputs (another function of the output is to control the power windows). Built-in protection algorithm false positives will allow you to keep the peace of others without reducing the level of security of the car.

The system has one programmable service channel to unlock the trunk or control additional devices. Pantera car alarm CLK-355 price refers to budget systems, however, in terms of the level of protection and service, in terms of operational reliability, it surpasses many more expensive systems.

Two 4-button programmable key fobs with dynamic code Keeloq™;
Anti-theft function "Anti-Carjacking" with the possibility of active safe engine shutdown;
2-level shock sensor;
Powerful 6-tone siren;
Starter lock with the possibility of connecting an additional lock;
Built-in relays to control door locks;
Built-in relay to control right/left direction indicators;
Programmable personal code system shutdowns;
2nd channel output (for unlocking the trunk or connecting additional accessories);
Output to control "polite lighting" / power window module / additional pager;
Ability to protect a car with a running engine

budgetary car alarm. Included: two 4-button programmable key fobs with Keeloq rolling code, 2-level shock sensor, and a powerful 6-tone siren. There are "Anti-Carjacking" functions with the ability to actively shut down the engine safely and block the starter with a built-in relay. It is also possible to connect up to 2 additional engine locks.

Updating the range of Pantera car alarms led to the release of the new model CLK-355. This car alarm is designed specifically for operation. in Russian conditions and is intended for the most part for mass installation on domestic cars (therefore, the price is appropriate). However, nevertheless, in accordance with the purpose of the system, a wide range of software functions for connection variations was introduced, which would allow it to fully function on cars of different classes and brands. The system uses an external interlock and a 40 amp relay with a ready-made block included.

Completely equipped with a powerful 6-tone siren, 2-level shock sensor, LED, documents, Valet switch button. Valet mode, by the way, can be activated / deactivated remotely - from the key fob, and with warning signals. Trinkets-transmitters are simple, and at the same time multifunctional. 4 buttons provide system control. The security mode is activated / deactivated by different buttons. A big plus is that the key fobs are not overloaded with various functions, but they have a very weak range - only up to 40 m.

The set of security features, in addition to the standard set, has an immobilizer mode, the ability to guard with the engine running, activation of the guard mode without using a transmitter, 2-stage disarming, activation of the guard mode with separate shutdown of shock sensor zones. Provided and remote activation silent security. This mode is supported by the ability to connect a pager to one of the programmable outputs.

The system is equipped with one programmable channel. Car alarm Pantera CLK-355 is a package at the lowest price with the maximum set of functions that is not inferior in terms of security and service to other more expensive systems.

Specifications:

4-button programmable key fob transmitter without LCD display (2 pcs.)
Keeloq™ Dynamic Code
Anti-theft function "Anti-Carjacking"
Possibility of active safe engine shutdown
2-level shock sensor
6 tone siren
Possibility of blocking the starter with built-in relay
Possibility to connect up to 2 additional engine blocks
Ability to control door locks
The presence of the function of separate control of the right / left direction indicators using the built-in relay
Programmable system shutdown PIN
Car protection with the engine running

Availability of exits:

Power output of the 2nd channel for unlocking the trunk / connecting additional devices
Output to control "polite lighting" / power window module / auxiliary pager

A malfunction of the car alarm or problems with the key fob, for example, its loss or damage, lead to the need to bind a new transmitter.

Each security system supports several key fobs, usually no more than 4-5 devices. Therefore, the need to flash a new transmitter may also arise due to the expansion of the number of connected devices. The sequence of actions when programming a car alarm depends on the model of the security system.

Pantera clk 355 programming features

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

In order to register the Pantera clk 355 key fob, you must perform the following sequence:

Remove security mode.
Switch off the ignition within five seconds.
During the five second time interval, press the Valet button three times.
Wait for a long siren signal.
Turn on the ignition. The siren should give a short and a long signal. The LED will start flashing.
Within 10 seconds, press any button on the key fob. A long siren signal will inform you of the successful binding of the transmitter.
Similarly, bind the remaining devices, the number of which should not exceed four.

Pantera clk 375 and clk 455 security systems have a similar connection of key fobs.

Binding Pantera SLK-625RS

To program the Pantera SLK-625RS alarm keyfobs, the following sequence must be observed:

Disable the protection of the iron horse.
Within 15 seconds, press Valet three times.
After the LED begins to flash slowly, you need to press any key on the key fob.
After the siren signal, program the rest of the devices in the same way.

Pantera SLK-35SC Firmware Features

In order to bind key fobs in the Pantera SLK-35SC security system, you must perform the following steps:

Disarm the system.
Turn the key in the ignition switch to turn it on.
Press the Valet button three times. Wait for two siren signals and LED flashing.
Select the channel control key of your choice 1. The default values are in the table below.

Press the selected button.
A long siren signal will confirm the binding of channel 1. Further determination of the ratio of keys and channels will occur automatically.
Upon completion of the firmware, press the Valet button or turn off the ignition. Automatic exit from the binding mode will occur after 15 seconds.

This instruction is also relevant for other Panther car alarms, for example, SLK-100SC, SLK-7I, SLK-200SC, SLK-4I, SLK-5I.

Pantera SLK-75SC Programming

In order to program the Pantera SLK-75SC, you must follow the instructions:

Disarm the system.
Turn on the ignition.
Press the Valet button the number of times corresponding to the desired mode selection in the table below.

Hold down the "Jack" button until the siren beeps.
While continuing to hold down the Valet key, press button 1 for mode 1-2 or give any signal if 3-6 is activated.
Turn off the ignition

Pantera SLK500 Binding Features

If you need to configure the Pantera SLK500, the actions should be similar to the Panther SLK-75SC car alarm.

The only difference is in the choice of the mode available for activation by the car owner. Security system gives you a choice of four options shown in the table below.

As part of the renewal of the Pantera car alarm range, a new model was released - CLK-355. This alarm is designed for operation in Russian conditions and is intended for mass installation on domestic cars and popular foreign cars. According to this purpose, the developers have provided a wide range of software options and connection options, allowing the system to fully function on cars of different classes and manufacturers. The system uses an external interlock, a 40-amp relay with a ready-made block is included in the kit.
Like all "Panthers", this system is supplied in a complete package - a powerful 6-tone siren, a two-level shock sensor, installation "small things", LED, Valet switch. By the way, transactions with the "jack" at the request of the owner can be protected by a PIN code. The Valet mode itself can be turned on and off remotely, from the key fob. When the Valet mode is on, the system generates warning signals every time the ignition is turned off.

Keychain transmitters have 4 buttons each, the security is turned on and off by different buttons. Unlike “little-button” key fobs, these key fobs make it as easy as possible to control the system, since they are not “overloaded” with various functions. The range of the key fobs is up to 40 m. In addition to the “standard” ones, the set of security features includes the immobilizer mode, arming with the engine running, arming without a key fob, two-stage disarming, arming with separate disabling of shock sensor zones. Remote (without the need for programming) activation of “silent” security is also provided, when the siren does not sound alarms, but the connected lighting devices flash. This mode is backed up by the ability to connect a pager to one of the programmable outputs (another output function is to control power windows). The built-in anti-false alarm algorithm will allow you to keep the peace of others without reducing the level of car security.

The system has one programmable service channel for unlocking the trunk or controlling additional devices. The Pantera CLK-355 car alarm is priced as a budget system, but it surpasses many more expensive systems in terms of security and service, operational reliability.

Two 4-button programmable Keeloq™ rolling code transmitters;
Anti-theft function "Anti-Carjacking" with the possibility of active safe engine shutdown;
2-level shock sensor;
Powerful 6-tone siren;
Starter lock with the possibility of connecting an additional lock;
Built-in relays to control door locks;
Built-in relay to control right/left direction indicators;
Programmable personal system shutdown code;
2nd channel output (for unlocking the trunk or connecting additional accessories);
Output to control "polite lighting" / power window module / additional pager;
Ability to protect a car with a running engine

Among the variety of different burglar alarms that exist today, the Panther system is especially popular. This is largely due not only to the high reliability of this system, but also, to a large extent, the simplicity of its installation on various car models, as well as the presence detailed recommendations explaining how to connect a panther alarm.

But for the siren the best place, just in the engine compartment - in a place well protected from third-party access. The main thing is that it should not be close to moving and very hot engine elements. To prevent the accumulation of moisture in this unit, its socket should be directed downwards. Mount the siren with a bracket and a few screws.

The set of the Panther system necessarily includes a limit switch, with the help of which the protection of the car hood is ensured. This switch should be installed on a metal surface connected to the common ground where moisture does not accumulate, for example, on the side surface of the wings in the area of the hood (trunk). At correct installation the limit switch must have at least 6 mm of travel when closing the hood (and also the trunk, if there is a second, similar switch).

A red LED signaling the state of the security system is placed on the dashboard in a place that is clearly visible from the outside of the car and, at the same time, the indicator should not distract the driver. Before you start drilling a hole for it, you must first make sure that with reverse side there are no wires and other elements.

Determination of a place for the Valet switch requires special imagination, since, on the one hand, it should be easily accessible, and on the other hand, an attacker should not quickly find it and turn off the alarm.

For the shock sensor, the most comfortable spot, this is a solid surface between the engine compartment and the passenger compartment (from the passenger compartment). Sometimes it is attached with constrictions under dashboard or on the steering column. In any case, the sensor must have good access to make adjustments.

The standard panther car alarm connection scheme provides for the following distribution (in accordance with color marking) and connection of the main wires:

The wire white color, providing flashing parking lights when the system is triggered, as well as at the time of arming and disarming, it is connected to the parking lights circuit (if the circuit is of negative polarity, then through an additional relay);
The red wire, designed to power the system through a + 12V fuse, is connected to the positive terminal of the battery ";
White / red power wire + 12V of the central unit - through a fuse it is connected to the red wire;
White / black siren output wire - through a rubber bushing, it is laid to the siren installation site;
Wire dark - of blue color, used to remotely open the trunk - connects to terminal 85 of the additional relay. Please note that connecting this wire directly to the lock circuits is strictly prohibited;
Green / white wire that controls the interior lighting when the "Panic" mode is triggered, as well as at the time of disarming - the wire is connected to terminal 86 of the additional relay ";
Black wire "weight" - connects to the negative terminal of the battery;
The dark / green wire (-) of the hood (trunk) trigger, when shorted to ground, the system is instantly triggered, is extended to the hood (trunk) limit switches;
Purple wire (+) of the door trigger - regardless of the number of doors, it is connected to only one limit switch;
Purple wire (-) of the door trigger - as in the previous case, goes to the door switch;
The yellow wire for monitoring the presence of power at the ignition switch is connected to the wire of the ignition switch, on which, when the key is turned, + 12V appears;
Orange Starter Interlock Wire - Connects to terminal #86 of the auxiliary relay. At the same time, terminal # 85 is connected to the wire of the ignition switch, on which, at the time of starting the engine, a constant voltage of + 12V is created.

When installing the antenna wire, it is pulled out to its full length and installed in a place where it is difficult to damage it during the operation of the car.

Our instruction turned out to be quite universal, so it fits almost all modifications of pantera signaling devices. Below is a list of models that our guide will fit.

Pantera SLK-250SC
Pantera SLK-450SC
Pantera SLK-400SC
Pantera SLK-300SC
Pantera SLK-675RS
Pantera SLK-650RS
Pantera CLK-350
Pantera SLK-35 SC ver. 3
Pantera XS-330
Pantera SLR-5750
Pantera SLR-5755
Pantera QX-240
Pantera QX-250
Pantera QX-270
Pantera QX-290
Pantera XS-2000
Pantera XS-2500
Pantera XS-2600
Pantera XS-3100
Pantera SLK-868RS
Pantera LX-320
Pantera SLR-5625 BG
Pantera SLR-5625RC
Pantera CLK-650
Pantera SLK-600RS
Pantera CLC-200
Pantera QX-250
Pantera SLK-400SC
Pantera SLK-350SC
Pantera SLK-600 RS
Pantera SLK-300SC
Pantera CLC-180
Pantera SLK-625RS
Pantera SLR-5650
Pantera CLK-375>
Pantera CLK-455
Pantera CLK-355
Pantera CLK-500
Pantera CLK-600
Pantera XS-200
Pantera XS-110
Pantera XS-1500
Pantera XS-1000
Pantera SLK-7i
Pantera SLK-5i
Pantera SLK-3i
Pantera SLK-2i
Pantera SLK-85
Pantera SLK-755 RS
Pantera SLK-75
Pantera SLK-25 SC ver. 3
Pantera SLK-200SC
Pantera SLK-20SC ver. 3
Pantera SLK-500RS
Pantera SLK-100SC

Categories

Popular