How to adjust the clock on the alarm leopard. Emergency shutdown of Leopard car alarm. Dynamic control code

In previous articles, we considered some brands and modifications of car alarms. Another one of the best means The security system for cars is the Leopard alarm system. As usual, we will review specifications, reviews and comments.

Alarm models LEOPARD

The Leopard electronic security system has rich functionality. The main features of this brand:

• no restrictions on the brand of cars (suitable for all brands of cars, for motorcycles and scooters);
• a connection diagram is included if the user wants to mount and connect with his own hands;
• the Leopard signaling is protected from external interference, which is very important now, because there are code readers - from hijackers or salon thieves;
• the temperature range of operation is wide, it can be used in any climatic zones;
• There are models with auto start, which allows you to start the car engine remotely.

Leopard alarm models:

1. Forward (Forward);
2. LR 435;
3. LS 30/10;
4. LS 50/10;
5. LS 70/10;
6. LS 70/10EC;
7. LS 90/10EC;
8. Leo 3.2.

Leopard car alarm instructions

New devices all have wiring diagrams included. If suddenly such a scheme did not appear, then
you should not do the installation until you find the instructions specifically for this modification. Also, if there are doubts about the installation, it is better to let the auto electrician connect.

Consider the model LS 90/10 EU.

There are 4 control buttons on the key fob. There are options that are controlled only by the combined action of the keys.
The button on which the white arrow “to the left” is depicted is used to put the car on protection.
To turn off the protection of the car, you need to press the button on the opposite side of the key fob. These buttons are used to open and close the car doors.

Also, there are functions that depend on the time of pressing and holding the buttons.
So, if you press and hold the “left arrow” button for setting the car to protection and hold it for several seconds, the warning zone of the sensor will turn off. To completely disable this controller, you must press the same key twice in a row.

When you press the button with a crossed-out speaker pattern, the silent security mode is activated.

Another button, the third, is used to control the immobilizer (IMMO).

How to turn on a Leopard car alarm without a key fob

It happens that the key fob is lost or forgotten, or the batteries in it are dead. In this case, you can also put the car on protection against opening and theft.
Activation of the security system without a key fob:

1. Open driver's door.
2. Turn on the ignition.
3. Without closing the door, press the emergency stop button 3 times.
4. Should work sound signal, blink headlights and other optics. After 20 seconds, the sound and blinking of the lights should repeat.

After such a sequence of actions, the car is armed.

Installation and connection

Installing and connecting the Leopard security system is no more difficult than Cenmax (Tsenmaks), Starline (Starline), Tomahavk (Tomahawk), Pharaon (Pharaoh).

Mounting order:

1. 1. 1. Location selection:
         • Antenna for radio application of signals. It is better to install as high as possible, but away from metal parts.
         • Central block. Can be installed behind the dashboard. The main thing is that the central lock should be protected from overheating and high humidity.
         • Siren. Place for a siren under the hood. Mount with the horn down and away from the engine and hot pipes so that it is protected from overheating and high humidity.
         • Impact sensor. Optimal location for remote control, the longitudinal axis of the vehicle is considered. Installation is carried out in the salon.
      2. Connection:
         • Connect strictly according to the attached diagram. The diagrams are clear and easy to read.

Advantages and disadvantages

The Leopard alarm has the following advantages:

1. Setting the sensitivity of the shock sensor. The sensitivity threshold is adjusted after mounting the shock sensor (closer to the longitudinal axis of the car body). When setting up the installed sensor, they clap their palms on the car body and set at what impact force it should work. If you set it very sensitively, then at the slightest touch, the alarm will work. Hence the so-called false positives.
2. The protective system can be effectively operated in areas with a cold climate. Suitable for those who live in the Far North.
3. If the model has an auto start function, when this option is activated, the machine will start the internal combustion engine at a given time.
4. According to reviews, the Leopard car alarm keychain lasts a long time and does not cause problems.

Not all devices are perfect, so here there are some disadvantages:

1. In the presence of possible problems in security system, after auto start engine, it will stall.
2. It is difficult to make installation and connection on your own without experience.

Prices

The Leopard car signaling product line has a large run-up in terms of cost. Prices for 2018 for various models:

Leopard LS 70 EC - from 2150 rubles.

For such money, the LS 70EC device will have the following characteristics:

• Antigrabber.
• Keychain programming.
• Antiscanner.
• Multifunction LED.
• State memory.
• Quiet setting / disarming.
• Disabling the alarm without disarming.
• Remote shutdown of sensors.
• Disabling the warning zone of the sensor.
• Re-enable the sensors in armed mode.
• Auto search function.
• Arming with emergency shutdown button.
• Postponed protection mode.
• Automatic repositioning.
• Autoarm.
• Closing / opening doors when activating / deactivating the ignition switch.
• Bypassing the faulty zone.
• Remote control of the central lock (CL) when the ignition switch is turned on.
• Alarm notification.
• Fault notification.
• Checking for two-way communication.
• Anti-Hi-Jack (remote activation; operational programming for one trip).
• PIN code.
• Starter interlock relay.
• Status output “-” and “+” of door limit switches.
• Hood end cap.
• Trunk terminal.
• Control input of brake lights.
• Built-in 2-level shock sensor with remote setting.
• Emergency stop button.

Additional control channels:
Control output with software function selection:

• Trunk unlocking.
• Timer output (2 modes).
• fixed momentum.

Control output with software function selection:

• Interior lighting.
• Closing windows when arming (2 modes).

Programmable Features:

• Closing / opening doors when the ignition is turned on.
• Continuous/pulse siren output.
• Auto arming (with or without locking the doors).
• Reactivation of arming.
• Passive immobilizer mode.
• Accounting for cabin light delay.
• Delayed guard function.
• The duration of the impulse of the central lock (CL).
• Emergency turn-off security system (PIN code).
• Operation mode of the additional channel No. 2 (activation of the interior lighting, closing the windows).
• Operation mode of the additional channel No. 1 (Opening the trunk, 10 sec, 30 sec, fixed impulse - until the button is pressed again).
• Return to factory settings.

Additional functions of the bi-directional remote control:

• Real time clock.
• Start temperature.
• Alarm.
• Countdown timer.
• Battery discharge indicator.
• Vibrating bell.
• Display illumination.
• Button lock option.
• Indication of the sensitivity of the shock sensor.

Communication range in urban area:

• On the waves of the control channel - 500 m;
• On the waves of the pager channel - 900 m.

Leopard LS 90/10 ES with auto start costs about 4 thousand rubles.

At the moment, the model LS 90/10 EC is out of production. Article 5765, who wants to find it in online stores.

Equipment

• The main unit of the Leopard LS 90/10EC system.
• Keychain with feedback and LCD display.
• Trinket remote control(DU).
• Transceiver antenna module.
• Dual level shock sensor.
• Led indicator.
• Emergency stop key.
• Instructions for installation and use.

Characteristics

1. Manufacturer: Leopard.
2. Type: security system.
3. Indicator type: LCD display.
4. Warning range: 1000 m.
5. Control range: 600 m.
6. Communication type: bilateral.
7. Silent arming/disarming: yes.
8. Built-in GSM module: no.
9. Built-in GPS module: no.
10. Remote engine start: Yes.
11. Warranty Policy.
12. Warranty: 1 year.

Leopard LR 433 in the summer of 2018 has a price of 1900 rubles.

Characteristics:

• Type: Auto burglar alarm;
• Anti-Hi-Jack: yes;
• Auto activation of the protection function: yes;
• Keychain with LCD display: no;
• Shock sensor: yes;
• Feedback: no;
• Range from vehicle to the main key fob: 800 m;
• Option "Panic": yes;
• Function of an auto closing of glasses: is;
• Immobilizer function: yes;
• Possibility of guarding the car with the internal combustion engine running: no;
• Car search function: no;
• Anti-grabber option: yes;
• Anti-scanner option: yes;
• Relay for door lock control: yes.

Video

In this video, a review of the Leopard NR 300 model, which helped some owners figure it out.

Leopard LS 60/10 is a modern car alarm that is quite different long range communication, ease of use and reliability.

The system is controlled using ergonomic keychain with LCD display. The key fob allows you to control the system from a distance up to 500 m and receive notifications at a distance up to 1000 m. All processes related to the operation of the car alarm are displayed on the key fob display in the form of icons. Also included additional keychain, which is designed to perform basic control functions. The range of the additional key fob is about 20-50 meters.

This model car alarms are highly functional, which provides additional comfort when operating a car. Among the wide range of functions of the Leopard LS 60/10, it is worth highlighting the " Turbo timer", which allows you to extend the life of the turbocharged engine and save the time of the car owner. To protect the car during the trip, the alarm has a function " Anti car jacking", which allows you to block the engine during the robbery capture of the vehicle.

Features Leopard LS 60/10:

Leopard alarms are very popular among motorists in our country. They are quite reliable, and their price is at an acceptable level. Also modern models possess two-way communication and secure signal encryption.

Alarm Leopard LS 90/10 EC

Description

This alarm model is considered one of the most popular on the market. It has rich functionality and allows you to provide comprehensive protection car.

The device has two-way communication. This ensures the protection of doors, trunk, hood and space inside the cabin. In case of danger, the owner is notified by means of a sound signal, a message on the key fob and light illumination. Simply put, the siren turns on, the car starts flashing its headlights and the driver hears a sound from the key fob.

Attention! The Leopard ls 90/10 EC alarm is capable of blocking the engine if the need arises.

The Leopard alarm interlock system is easily integrated with any gearbox and engine type. All functions are controlled by a key fob, which should always be near the driver.

The remote control also works as a pager. This is a small rectangular device that fits easily in the hand. At the same time, it is able to both receive and send signals. Power is supplied from a battery of one and a half volts. On average, one charge is enough for six months of use.

To make it easier for the driver to keep track of his car, the Leopard alarm key fob is equipped with a liquid crystal display. It makes it easy to monitor Current state vehicle and monitor the execution of commands.

Attention! The remote control is controlled by means of four keys, which are located on the key fob on the sides.

When the driver presses one of the keys, a coded radio signal is generated. The system is configured in such a way that with each new press, the encoding changes, so even if intercepted, an attacker will not be able to use this information.

Up to 30 commands can be displayed on the control panel, here are the main ones:

• security mode;
• the door, hood, trunk are open;
• valet mode;
• anti hi-jack;
• the ignition is on.

Also included is a unidirectional remote control. It is powered by a 3 volt battery. At the same time, one charge is enough for a year of operation. If you notice that the receiving and transmitting range has decreased, then the battery needs to be replaced.

The unidirectional remote also has four buttons. The indicator LED indicates that the signal has been transmitted. The LCD display is missing. Via this device only the alarm can be controlled.

Alarm user manual

As mentioned above, there are four control keys on the Leopard alarm control panel. With their help, the car owner can perform certain manipulations with his car and alarm.

Attention! Some functions are triggered by a key combination.

The key with a white arrow to the left is responsible for arming the car. To remove the car from the alarm, you need to press the button on the opposite side. The same keys are respectively responsible for locking and unlocking the doors.

From the duration of pressing, the effect produced by a particular key also changes. As an example, consider the same “left arrow”. If you hold it down and hold it for a while, the warning zone of the sensor will turn off. Two long presses in a row will turn off the sensor completely.

The key with the crossed-out speaker allows you to activate the silent activation of the armed mode. Simply put, if you want your car to not give any signals when the alarm is activated, you need to press it.

On the Leopard alarm panel, there was only one button left with an extremely strange designation. She is in charge of the immobilizer. In principle, these are the main functions of this system.

Attention! In order to reprogram the modes, you need to hold the third button for more than 4 seconds.

have just been described basic commands allowing you to manage car alarm"Leopard". But sometimes drivers have to deal with emergency situations. For example, cases of loss of the control panel are quite common. Fortunately, there is an algorithm of actions that will help you easily get out of this situation.

When you do not have an alarm remote, in order to deactivate the system you need to open the doors and leave it in that state. After that, you need to turn on the ignition. Next, you need to press the emergency shutdown button three times and enter the PIN code.

The opposite situation is also possible: if the remote control is faulty, you need to arm the car using the Leopard alarm. To do this, simply follow this algorithm:

1. Open the door and turn on the ignition.
2. At open door press the emergency stop button three times.
3. A beep will sound. Headlights flicker. After 20 seconds, the flashing will repeat.
4. The Leopard alarm system will enter armed mode.

There are a few things to keep in mind when arming in an emergency. You will have 20 seconds to turn off the alarm without using the remote control. If during this time you do not cope, the alarm will be activated.

Leopard LS70/10

Description

Alarm Leopard LS70/10 is also very popular among motorists. It is a slightly simplified version previous model. But its functions are more than enough to provide your car with reliable protection.

You need to start with the fact that there are only two control buttons on the remote control and there is no liquid crystal display. The alarm is activated when unauthorized opening of doors, hood or trunk. Also, special sensors will respond to any impact.

If the ignition is turned on when the security mode is activated, the engine control will be blocked. This will prevent thieves from stealing your car. Automotive experts recommend additionally install volume sensors. They will control the space in the cabin and near the car.

To increase the level of security, there is a built-in confirmation system for disarming. It is responsible for encoding your signals, which greatly increases the reliability of protection.

To protect against unauthorized access, the Leopard LS70 / 10 alarm system has a special KeeLoq security system. This is an advanced coding technology that allows you to successfully counter interceptors.

An important feature This Leopard alarm model is an anti-scanning system. Its use eliminates the possibility of selecting codes randomly.

At one time, offenders came up with a very unusual way hacking protective system. They removed and put on the battery terminal. Primitive systems could not trace this manipulation. But with the Leopard LS70 / 10 alarm, everything is different. There is a built-in memory that captures all the states of the car.

To prevent false alarms exist special function. It allows the system to bypass the "fault zone", while remaining in a healthy state. When it is activated, the faulty sensor is disabled.

Attention! For a shutdown to occur, the sensor must be activated eight times in a row.

When the "fault zone" bypass is activated, all other sensors remain activated, as well as the system itself. As a result, the level of vehicle safety is reduced minimally.

This alarm The leopard has such additional channels:

• for trunk lock
• driver door,
• programmable output for three options.

Despite its apparent simplicity, the LS70/10 provides high level car protection. The only serious drawback is the lack of a liquid crystal display.

This system also has a PIN code that can be used to disable the Leopard alarm in an emergency. It consists of two numbers, so remembering it is not difficult. You can install it yourself if you wish.

Attention! If you enter the PIN incorrectly twice, the system will be blocked for two minutes.

Instruction

In this alarm Leopard is much smaller than the control keys. Despite this, there are quite a lot of functions and opportunities, here are the main ones:

• Arming - the first key. Press once to activate. If you do this twice, the sensors will turn off.
• To turn off the warning zone and activate the guard, press the number 2 key once.
• For silent arming, first press two, and then one. If you want to turn off the sensors at the same time, you need to press key 1 twice. You can do the same with the warning zone, you just need to press the second button a third time.
• To disarm the system, press number one again. The lock will only unlock on the driver's door. Press twice to open all doors.

These commands will allow you to carry out basic manipulations with the Leopard alarm according to the instructions. With their help, you can lock the car or open the locks. In addition, each of your commands will be accompanied by LED illumination.

Results

The Leopard alarms described in the article are easy to manage. It takes five minutes to learn the basic commands. Since there are few buttons on the control panels, their combinations are used to activate most functions.

The alarm in Leopard cars for a car today is one of the most common options for anti-theft systems. According to many motorists, such signaling can reliably protect vehicles from theft. You can learn more about Leopard alarms and their features from this material.

[ Hide ]

Model Features

Alarm Leopard, depending on the model, may have a fairly rich functionality.

Such devices allow you to reliably protect the car from theft, they are characterized by the following features:

1. The ability to connect car alarms to any car model. If necessary, such devices can be used to protect motorcycles or scooters.
2. Comes with alarm detailed instructions with a connection diagram and a description of how to use the unit.
3. Devices from Leopard, according to the manufacturer, are protected from external interference. Accordingly, this will prevent the possibility of interception of the digital code by intruders.
4. The anti-theft system can work normally at any temperature - as the manufacturer assures, this will not affect its functionality in general.
5. If you buy a model with the option to automatically start the engine, you can set the motor to start at the set time (the author of the video is the Techno Analysis channel).

The lineup

On sale today you can find the following models of Leopard alarms:

• forward;
• LR 433;
• LR 435;
• LS 30/10;
• LS 50/10;
• LS 70/10;
• LS 70/10EC;
• LS 90/10EC;
• LEO 3.2.

Instructions for use

The device must be connected in accordance with the diagram that is in any service manual. If there is no diagram, do not try to install an anti-theft system on your own. In order for the installation to work efficiently, it must be installed correctly, and for this it is advisable to use the services of an electrician.

As for the direct control of the alarm, we will consider the main nuances using the example of the most popular model LS 90/10 EC. The key fob of this model is equipped with four buttons, with which the motorist activates various options. Please note that some functions can only work with the combined activation of the buttons. The button with the image of a white arrow turned to the left is responsible for setting the car to protection.

In order to disable protection, you must press the key located on the opposite side. These buttons, respectively, are used to open and close doors (the author of the video is the Techno Analysis channel).

It should be noted that the activation of a particular function may depend on the duration of pressing the button. If you hold down the left arrow key, this will disable the sensor's warning zone. And to turn off the controller completely, you need to hold the button twice in a row. If you press the key with the crossed-out speaker, this will lead to silent arming. The remaining third button is responsible for the operation of the immobilizer.

If you don’t have a remote control or it doesn’t work, and you need to arm the car, you can do this as follows:

1. First, the driver's door opens and the ignition is activated.
2. Further, without closing the door, it is necessary to press the emergency shutdown button three times.
3. After these steps, you can hear a sound signal, the optics should also blink. These flashes should repeat after 20 seconds.
4. After that, you can be sure that your machine is under reliable protection, since the alarm will arm.

Pros and cons of the anti-theft system

Advantages first:

1. Sensitive shock sensor. If you live in a disadvantaged area where cars are stolen from time to time, the shock sensor can be configured so that the signaling turns on when you simply touch the car body.
2. As we said above, the system works normally even under the most low temperatures. To date, not a single case is known that would speak of the opposite.
3. With the auto start function, you can set the signaling so that the engine automatically turns on at the set time. Accordingly, this will save you from having to warm up the car.
4. In general, car owners, as a rule, do not experience problems with the operation of key fobs.

1. If there are malfunctions in the cooling system, this may cause the engine to automatically stall after auto-start.
2. Installation of the installation at home is quite difficult.

Issue price

Price anti-theft installations may differ significantly depending on the model. Below are average prices, they may vary depending on the region of residence.

Video "Overview of the signaling and replacing the key fob button with your own hands"

Detailed overview anti-theft system, as well as instructions for replacing the Leopard key fob buttons, are presented in this video (the author of the video is the Stas Mysak channel).

People who, while owning a car, do not have a system of blocking from unwanted intrusion, attackers in the blink of an eye deprive the right to a vehicle.

Choosing a decent device is extremely important. For zealous owners, folk rumor recommends taking a good look at Alarm Leopard, excerpts from instructions to which are given below. For example, the model LR433 is taken.

Purpose of the device

The main role of the system is to protect everything that is outside and inside the vehicle, including the nodes located under the hood of the unit, the interior of the car (which can be penetrated through the doors and trunk). The space near the unit is protected so that intruders do not remove tires, mirrors, headlights, etc.

In order to increase the level of safety, it is recommended to equip the car with a drive to lock the doors.

System operation control

The device action algorithm is configured in such a way that the performance of all sensors is periodically checked.

In the event that any of the sensors failed and caused an alarm 10 times, the inoperative element is “turned off” from the system. In automatic mode, the zone is blocked. Until proper measures are taken, the site is deliberately deprived of control.

For absent-minded car owners, a procedure is provided for when the keys remain in the ignition. If there is power for batteries, the doors are not locked.

Programming of delay of inclusion of saloon food is provided. This allows you to use a security device for various modifications of vehicles.

There is a possibility of repair work which are performed when the unit is de-energized. To do this, deactivation (and subsequent activation) must be carried out when the security system is not working. The siren will not sound in this case.

The option of using a two-stage order for opening the driver's door is thought out. A separate communication channel is provided specifically for these needs.

Among the frequencies used (433.92 mHz), it is possible to set up a communication line for monitoring the status of the trunk lock and for blocking the power window. This mode is used when the unit is armed.

Alarm Leopard: instructions for data transfer

To perform its functions, the system firmware is used by software. KeeLoq complex. This is modern system encryption with the so-called "jumping code". Even for an experienced radio encoder, detecting and reading it is very difficult.

The algorithm of the device is difficult to scan, intercept and recode. The chipset generates dynamic code. Support feedback occurs according to non-linear laws.

In the absence of a mobile transceiver, it will not be possible to quickly approach the car and manipulate the battery terminals. The siren will sound immediately and the possibility of starting the internal combustion engine will be blocked.

Mobile receiving/transmitting gadgets

Keychain design simple, yes led indicator. The control takes place with the help of 3 buttons, providing such teams:

security modes, "Panic", Anti Hi-jack;
• “silent” interaction of system components (including those with disabled sensors);
• unlocking the trunk, doors, etc.

Each time you press the button, a new code is generated.

According to the documentation, average term The operation of the key fob should not be less than 12 months. By reducing the communication range, relative to the one that is set technical parameters, you can judge the "run down" battery.

It is possible to use a personal PIN-code, which, if necessary, disables the system. It should be borne in mind that it is recommended to replace the preset factory settings with individual ones.

Reading light information

Below is status indication characteristic of a given regime.

1. About inclusion security functions indicates rarely pulsating signals.
2. When the protection of movable property is terminated, there is no light indication.
3. Warning signs are often successive light pulses.

To turn on and off protective properties system, you must use the button closest to the antenna. The ignition unit must be turned off before this.

Please read carefully before purchasing the instrument. technical capabilities and instruction for installation Alarm Leopard. Match your skill level to the required correct installation products.

If in doubt, spare no expense for the specialist to competently strengthen, adjust and train the user in managing the auto security system.