How to install and use the Jaguar EZ-ONE alarm with step by step instructions. Instructions for using a Jaguar car alarm with auto start Video: emergency disarming of the Jaguar TEZ beta alarm

Jaguar security system with automatic start engine has proven itself with positive side thanks to reliability. It not only provides protection for the car, but also allows you to control the main functions of the car. Instructions for using the Jaguar alarm with auto start allows the car owner to properly install and connect, as well as configure the complex.

[ Hide ]

Specifications

Signaling Jaguar models EZ One, EZ Four, EZ Six, TEZ and others have the following properties:

packet data transmission between the microprocessor unit and the pager is performed at a frequency of 433.92 MHz;
the range of the communicator in the pulse transmission mode is 600 meters in open areas with a minimum of interference;
the range of the main remote control in the mode of receiving commands is 1200 meters;
the range of the spare pager is reduced to fifteen meters;
for protection of electrical circuits anti-theft complex when installing, use safety devices rated from 7.5 to 30 amperes, depending on the section of the circuit;
the amount of current consumption when the protective mode is activated is less than 15 mA;
activation protective mode can be performed at intervals of five, thirty or forty-five seconds;
to protect the car, door, trunk, hood, parking brake lever, ignition system power input, impact controller, auxiliary controllers and warning zone are used;
the possible number of transmitters that can be connected to the system is four;
the signaling must be powered from the mains with a voltage in the range from 9 to 18 volts.

Equipment

The Jaguar package includes one limit switch, the rest of the switches will have to be purchased separately.

Components that are included in the alarm kit:

The microprocessor module is the main device of the car alarm.
User manual for the management, use and maintenance of the signaling. If you carefully read service manual, you can learn about additional useful functions.
The main console equipped with a screen and having a two-way communication function.
Spare remote. It has a smaller range and is not equipped with a display.
A transceiver equipped with a call button for the owner of the car. This device is equipped with a built-in temperature controller that allows you to measure its value in the car. The transceiver comes with a wire and a connector for connection.
Siren six-tone.
The shock controller belongs to the class of two-level.
A diode light bulb that acts as a status indicator.
One limit switch for hood mounting.
A set of connectors and wires for connecting the signaling.
Two batteries for installation in the main and spare transmitter. Between themselves, they differ in type, so when installing them, you will not be able to confuse them.
Two stickers - one with the Jaguar logo, the second is used to fix the antenna module.
Warranty card.

Key features

The main functions of Jaguar alarms:

The ability to activate the protection mode with or without sound and light accompaniment.
The ability to notify the car owner about the events that are recorded by the security complex. Keychain with feedback displays data about activated security zones.
Defence from robbery, this feature is called Anti-hijack. She is intellectual. The essence of its action is to block the motor when the car is forcibly seized. When attackers force the car owner out of the passenger compartment, the signaling system can understand this by analyzing the operation of sensors installed on the brake pedal and handbrake lever. After the car drives off to a safe distance from the car owner, the engine blocking will be activated.
The user can independently select the signal that is played when an alarm is activated.
Seven independent security zones provide over reliable protection.
The protection mode is disabled in two stages.
The ability to warn the car owner that he forgot to lock the doors before starting to move.
If necessary, a steering horn can be connected to.
Automatic start. This option will ensure that the engine warms up in the cold season and will be useful for those who are constantly late. Now you do not have to spend time warming up the car.
The memory of the microprocessor module allows you to record information about the events that have occurred in the work security complex. Even after disconnecting the battery, information about this will remain in the memory.
The consumer has the option additional connection digital relays used to block the power unit.
The consumer has the possibility of additional connection to the signaling GPS beacon.

Advantages and disadvantages

Advantages of signaling Jaguar:

Rich functionality. In their feedback, consumers note that Jaguar alarms have many useful options that make it easier to control not only the system itself, but also other components of the machine.
Affordable cost. You can buy an alarm with auto start at a price of 5 thousand rubles and more. The cost will depend on additional features.

The disadvantages include the weak body of the keychain. With regular falls, the device quickly breaks down, over time, its buttons begin to sink. To prevent damage to the communicator, you can install it in a case. But it will not help from the sinking of the buttons.

TheAAG999 channel spoke about the possibilities and disadvantages security systems Jaguar.

How to install?

In accordance with the instructions for using the Jaguar alarm with auto start, installation is carried out as follows:

The battery is turned off. Installation and installation work must be carried out with the on-board network de-energized. If the car has a car radio with a programmed code, then do not disconnect the battery until you read the manual for the audio system or car.
AT hidden place the microprocessor module is mounted. The main unit can be installed behind the dashboard, so the length of the wires is minimal and the device is hidden. Disassemble the center console and remove the steering column trim. Connectors with plugs are disconnected from the tidy and fasteners are disconnected. Do not fix the block on metal surface, this may cause it to malfunction. The device is fastened with self-tapping screws or double-sided tape.
A siren is mounted under the hood, and a limit switch is mounted on the hood itself. When installing these elements, please note that they must be placed in places where moisture does not collect. The siren should not be installed next to the cylinder block, as it will quickly break down under the influence of elevated temperatures.
In the passenger compartment, install a transceiver with a button to call the car owner. The installation of this element must be carried out on windshield, but there should be no metal surfaces or wires near the device. Their presence will cause interference in signal transmission. The transceiver is fixed with a sticker or double-sided tape.
The shock controller is mounted on the partition separating the passenger compartment and the engine compartment. The device is fixed to a metal surface using self-tapping screws or adhesive tape. The shock sensor must be located so that the driver has free access to the device if adjustment is necessary.
Install a service button in one of the bundles with standard wiring. It should be placed under dashboard. You can additionally wrap with tape.
The laying of wires is carried out under the lining of the machine, for this you will have to disassemble part of the upholstery. It is recommended to lay electrical circuits away from power wires(ignition systems, high voltage cables, etc.), as well as electronic appliances. This can lead to signaling malfunctions due to interference.

The Avtozvuk channel talked about the mistakes that consumers often make when installing car alarms.

User manual

You can use all the functions of the Jaguar alarm with auto start only after linking the remote control.

Binding procedure:

Disable security mode, get in the car. Insert the key into the ignition lock, but do not turn it. Binding is done with the ignition off. Click on the service key seven times.
Within five seconds after the last pressing, turn the lock key to the On position, this will turn on the ignition.
The siren of the complex will play seven sound signals, this indicates its readiness for binding.
Within ten seconds after the last signal, hold down the first and second keys of the pager, they show an open and locked lock. The system will emit one beep to confirm binding.
To program a second pager, follow the same steps. There will be two beeps to confirm.

Designation of buttons and indicators on the keychain

Schematic representation of the display

Status indicators:

Built-in battery communicator. The icon indicates when the battery needs to be replaced.
Auxiliary second channel.
Option to start the internal combustion engine by temperature.
The power unit of the machine is wound up.
The tailgate is open.
Option to notify the car owner through vibration.
The car doors are open.
Service mode.
Automatic reactivation indicator for the protective function.
Silent security icon.
Protective mode indicator with sound confirmation.
The hood of the car is open.
Sensitivity controller indicator, turns on when hitting the car body.
Hand brake.
Closing door locks.
Opening door locks.
Remote control receiver operation indicator.
Machine communication confirmation icon.
Car owner call icon.
Power saving mode activation indicator.
The icon of the activated ignition in the car.
Alarm indicator.
AM - the first half of the day.
PM is the afternoon time.
ICE daily start indicator.
A symbol indicating the temperature in the cabin and the current time.
temperature scale.
Timer.

Autorun settings

Engine start on command:

Click on the button in the form of a locked padlock and hold it.
When the remote beeps, release the key and click on the third button labeled Ch/Prog.
Light fixtures the cars will blink three times, this indicates a successful start of the internal combustion engine.
An indicator in the form of smoke from the exhaust pipe will appear on the remote control display.

Alexey Zamur in the video showed how a remote engine start is performed on a Renault car.

By time

For engine start in time do the following:

Make sure the time on the remote control is set correctly.
Set the alarm for the time at which the start will be performed. A bell-shaped icon will appear on the remote control screen after setting.
Click on key 3 and hold it down until the remote control emits two beeps - one melodic and one short.
Release the third button.
Briefly click on the third key to place the remote control cursor on the screen indicator labeled Clock Start.
Click on the button in the form of a key and a locked lock, this will activate the function. Lighting devices on the machine should blink once, and the remote control will emit a melodious signal.
After it has been played, an indicator labeled Clock Start will appear on the transmitter display next to the bell icon.

The jaguar ez one security system is the most reliable protection for any vehicle. The jaguar ez one alarm contains over sixty different functions.

Remote start-up of the power plant and control of its operation is implemented using Smart Key technology. Also, the alarm is able to work both on vehicles with any type of engine (diesel, gasoline, direct injection), and any type of transmission (manual, automatic or CVT).

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

The immobilizer will allow you to qualitatively protect the car from theft.

Activation of the security mode using a key fob - communicator

Attention! You can install the security system yourself, before the procedure, you should carefully study the installation instructions.

Note: the jaguar ez one key fob communicator uses a dynamic encryption algorithm (each time the key fob key is pressed, the transmitted code changes randomly), because of this, the system can sometimes be out of sync. This should not be considered a breakdown, moreover, such a situation occurs quite rarely. Approach the vehicle and quickly press the key 2 times. The system is resynchronized (for more details, see the operating instructions).

The armed mode is activated by pressing the corresponding key once, while the car ignition must be turned off, and all doors, hood cover and luggage compartment are closed. As soon as the car is armed, the system will automatically disable all locks (if their drives are connected), the windows of the car will also be closed (of course, if there are drives and they are connected to the system).

In confirmation of the activation of the armed mode, the direction indicators will flash once and a warning will be heard. sound signal, and the main LED - the indicator will begin to flicker slowly. The indicator of the activated security system will appear on the LCD screen of the keyfob-transmitter, and a single beep will also sound.

Important! If on your vehicle there is a function to delay turning off the interior lighting, you need, according to its time, to adjust the delay with which it will be activated security mode. Exactly the same actions must be performed if there is a volume sensor (available in any ver).

In this case, the jaguar alarm will give audio and visual signals (a short beep and a single flash of the direction indicator) confirming the activation of the security system. When the pre-arming period has elapsed, a single flash of the direction indicators will confirm that the protection has been activated (a complete list of notification signals is available in the operating instructions).

Arming with shock sensor bypass

Remember! Trademark Jaguar is constantly upgrading its security systems, their functionality may vary slightly. To distinguish between models, a pointer is used - ver.

The functionality of the security system supports multiple arming with zone-by-zone disabling of sensors, including a shock sensor.

Important! Before using the security system, it is strongly recommended that you carefully study the operating instructions for the car alarm.

In this article, we will try to briefly talk about one of the best car protection devices on our market - the Jaguar Ez-beta alarm.

This security system will delight car owners not only with reliability, a wide range of options, but also with ease of use, and most importantly, with the best price.

In sum, you get an excellent product that will provide you with required level protection and will seem very reliable in operation.

Popular car alarm Jaguar models Ez-beta is intruder car system, main feature which - two-way communication. The advantage of the device is the menu of the four-button key fob, created with the help of icons that are understandable in fact on an intuitive level.

Having read the instructions almost once, the owner of the car will not experience any difficulties in operating the device. Using the key fob, the owner of the car has the ability to start all types of engines - starting from
gasoline and diesel, ending with a turbocharged one, while being at a certain distance from the car.

The developers of the device have created a unique algorithm for encoding the radio signal; together with excellent opportunities protection against a possible attempt to scan or intercept, car alarm on modern market practically has no analogues, given the price category.

Functional parameters of the system

Let's list now strengths car alarms that make it one of the best in its category.

Firstly, the device creates conditions for increased protection against theft.
Secondly, this system provides reliable protection, which avoids the risk of unauthorized recording of additional key fobs.

In addition, the developers foresaw the option of two engine locks, as well as an immobilizer function.

For Jaguar car alarms Ez-beta created a special program in case of car capture with the help of robbery. In this case, the Anti-Hi-Jack mode activates an active and safe shutdown of the engine. The option works either automatically or by using the key fob.

In the functionality of the device, the option of priority unlocking of the driver's door is also provided. This means that intruders do not have a chance to get into a car that was disarmed due to the rear and front right doors.

One of the best examples of Jaguar Ez-beta car alarms is the ver.2 model, which is reliable and easy to use. In addition to the advantages already listed, we note that the device controls six security zones within 1,200 m.

Another benefit of ver. above analogues - the option of "search for a car", which greatly simplifies the search for your car, which is especially convenient in the dark or in a large parking lot.

Jaguar Ez-beta security system models boast

Key fobs - original multifunctional and color LCD displays;
A program of pictograms, through which the status of six protection zones is monitored;
Covered with a ball of rubber, which eliminates the risk of the key fob slipping in the user's hands;
System status monitoring, operating at a distance within 1,200 m;

It is impossible not to dwell on a number of, one might say, secondary functions that are important in their own way and provide additional levels of comfort and reliability.

The car alarm consists of a number of components. It is worth noting the presence of a three-button programmable transmitter. This instrument has an LCD display and two-way communication.

We list other additional features and features of car alarms. Jaguar Ez-beta Models:

Service functions

Jaguar Ez-beta models are downright crammed with a variety of service functions, the use of which allows you to increase the comfort of using a car.

For example, let's call the "Comfort" function, which concerns the process of arming the security system and consists in providing a delay for a certain (programmed) time for turning off the interior light. By the way, it is possible to carry out arming without the use of a transmitter, that is, a key fob.

About the next service function we already mentioned - this is the "search for cars" option. By activating this function, you can easily figure out where your car is, due to the sound and light signals it gives.

If you need to leave your car for a short time, then you can turn on the security system even when the engine is not turned off.

Thus, we were convinced that the Jaguar Ez-beta models are modern examples of security systems for cars - with multi-level sophisticated protection and simplified control. That is, there is everything that the owner of the car needs.

Categories

Popular