How to set up a starline a92 alarm. Repair and service of cars. Automatic engine start based on temperature

To protect your car as much as possible from theft and burglary, drivers use car alarms. The best of its kind starline a92 dialog CAN flex will provide maximum protection thanks to its performance. Due to the presence of a remote control in the kit, protection is carried out at a distance. In addition, thanks to starline a92, you can set the engine to start automatically at a certain time or at the right temperature.

Also, there is a car alarm. useful advantage – uninterrupted work in big cities where there is a lot of interference. And the instruction and installation guide will simplify the installation process. In addition, the alarm can be assigned to a specific car. And the “autorun” function will simplify the life of many motorists. Due to the presence of the transmitter, you can use many service functions car in the distance. The transfer is carried out by a special encrypted code. This provides additional protection from code grabbers. Plus, the code is transmitted at jumping frequencies.

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

Car alarms can be installed both independently and in those. services. The reason is that starline a92 dialog CAN flex standard design. But at self installation it is necessary to know the device of the car well, not only in theory. In addition, you need to be patient, time and measuring equipment in order to properly connect the wires that supply power and control autorun.

What is included

wires
Two key rings. One with LCD screen, the other without;
CBS (Central Signaling Unit);
Transceiver (provides communication between the key fob and the CBS);
Hood button
Light-emitting diode;
Service button;
Engine temperature sensor;
Installation instructions;
User guide;
User manual.

Wires are needed in order to connect all parts of the alarm. In addition, with their help, the connection of the CBS and the ignition of the car is made. By the way, this is an important and necessary moment. The key fob is needed in order to control autorun, service functions and notify the owner of an attempted hack or theft.

The kit comes with two remotes. The second is a spare. No one is immune from unexpected unpleasant incidents. Breakage or loss will not leave the motorist without remote control by car. True, the second key fob does not have a screen, which is certainly inconvenient. But buying another key fob and "teach" it a special car code is not difficult.

The central signaling unit is the "brain" of the entire system. It receives the signal, decrypts it and executes a specific task. The transceiver is usually mounted on windshield. With its help, the code is received and transmitted from the remote control to the CBS. The hood button is necessary so that the owner has free access to this part of the car. In addition, the alarm housing is installed next to the fuses, and the limit switch is above the left headlight. This provides additional protection against hacking. The limit switch is needed in order to send a signal to the remote control in case of unauthorized opening of the hood.

The LED informs the owner that the alarm is working. Service star line button a92 dialog can flex performs the same functions as the button on the key fob. The instruction manual and installation manual help you to cope with the installation and use. But in order for autorun control to occur correctly, it is best to contact specialized tech. Services.

The key fob transmitter is an important thing for protecting the car and managing its service capabilities. Therefore it appearance and the properties meet all the requirements of the owner. And this means that the case is made in accordance with the requirements of convenience. Convenient location it's not all in hand. The keychain has such a shape that the owner simply and quickly finds the right buttons by touch. The keys themselves are comfortable, informative, and notify the owner that the selected command has been completed. Often it's just a click after a click.

The Starline A92 alarm is one of the best car alarms in terms of price and quality presented on modern market. One of the advantages of "signaling" is remote control using Keychain Starline A92 Dialog. In urban conditions, the device works flawlessly, without reacting to interference. The installation is designed for 5 years of active operation.

[ Hide ]

Specifications

The alarm has the following characteristics:

Operates at a frequency from 433.05 to 434.79 MHz, which guarantees greater security compared to other "signals".
To protect the dial code from hacking, individual encryption keys of 128 bits in length are used.
Additionally used comparatively new method jumping frequencies, which greatly complicates the hacking of the security system. Thanks to the 128-channel narrowband transceiver, the range of the key fob is increased. In the mode of transmitting commands to the block, the range is 800 m², from the block - 2000 m². The maximum range of the second key fob is 15 m².
Working temperature, in which the "signaling" is able to perform its function qualitatively, according to the assurances of the developers, is from -40 to +85 degrees.
Supply voltage direct current equals 9-18 mA, in the armed mode it reaches 25 mA.
Type of shock sensor - piezoelectric. The advantage of this type is that it can capture any mechanical influences on the car. In addition, it can be combined with other alarms, if the need arises.

An overview of the Starline A92 car alarm and all its functions can be viewed in the video below. Taken from the autoPulse channel. ru.

Equipment

The standard equipment of the Starline A92 car alarm includes:

central signaling unit;
keychain with two-way communication and liquid crystal display;
key fob with two-way communication without a liquid crystal display;
two-level screen sensor;
transceiver;
hood button;
Light-emitting diode;
service button;
set of wires;
engine temperature sensor;
installation instructions;
user manual;
user memo.

Complete set of car alarm Starline A92

Advantages and disadvantages

The reviews of the owners of the Starline A92 car alarm are mostly positive. Of the advantages, it should be noted a clear keychain display in Russian with accessible controls. Those who independently installed the "signaling" speak of the ease and simplicity of installation. Pleased with the level of reliability and range.

According to some users, cons are extremely rare. Malfunctions are associated with the operation of the key fob, which can respond to accidental pressing while in the owner's pocket or purse. There have been complaints that the function of the security system during severe frosts doesn't work the first time. It was about turning on the third attempt at a temperature of -20 degrees.

Installation instructions

You can install a car alarm yourself, but it would be better to install it with the help of specialists. In the first case, the installation guide car alarm Starline A92 Can must be read carefully before starting work. It is advisable to re-read the instructions for the car in advance or keep it nearby. If it is missing, you can download it from the Internet.

Step-by-step installation of a car alarm looks like this:

We place the central block in a hidden place. This may be the area under dashboard, the main thing is to avoid moisture and heat. You can fix it with screws or tape.
We fix the transceiver module on the windshield. It is necessary to position the antenna in such a way that at least 5 cm is left to the metal parts of the body, rain and light sensors.
The siren is located under the hood of the car, away from sources of heat and moisture, with the mouthpiece down.
The shock sensor must be fixed with a metal tie or tape on a metal surface.
The temperature sensor is secured with cable ties to the coolant pipe next to the engine block. Can be placed on metal parts adjacent to the motor using an M6 screwdriver. Cannot be installed near exhaust manifold. The correctness of the inclusion will depend on the correctly chosen place.
The LED indicator is installed in a prominent place on the dashboard.
The hidden button should be installed in an accessible place, but not conspicuous.

The location of the buttons on the key fob for setting functions

Autorun settings

Intellectual Starline launch A92 Dialog allows you to set up automatic engine start using a key fob using:

time;
temperature;
alarm clock.

Before programming, on machines with a manual transmission, you need to put the gearbox in program neutral. More details on how to do this are described in the instructions. Cars are automatically moved to the parking position. To prevent the car from moving at the time of installation, you should put it on the handbrake. The hood and trunk must be closed.

Configuring autorun by time

Step by step programming looks like this:

Click on the clock icon.
Then - key 3. The same button, immediately after enabling the option, adjusts the autorun time.
By pressing this combination again, you can extend the autorun time.

To disable the custom function, use a combination - one (long) and four (short). You can choose another option - the image of a fan with blades and a deuce.

Temperature trigger setting

You can choose from pre-programmed temperature conditions the one that suits you perfectly. Then program the time after which the mode will turn on. The shortest interval between launches is 1 hour.

The setting is performed by clicking on the image of the thermometer and the troika. The car will flash its lights, and the key fob will display the temperature that must be for autostart. Then the current time will be displayed on the screen. To disable the option, you need to put the remote control cursor on the indicator in the form of a thermometer.

Alarm start setting

To set up, just click on the image of the clock and the three. Then install right time. To disable the autorun option, you need to set the remote control cursor to the indicator in the form of a clock.

Possible malfunctions

When self-configuring autorun, the owner of the car may encounter malfunctions that may be caused by incorrect installation of the security system.

To correct it, it is enough to carefully re-read the technical documentation again. Perhaps the software neutral was not observed. Sometimes the problem is due to the initial malfunction of the sensors. In this case, you need to resolve the issue with specialists.

And car alarms also have a useful advantage - uninterrupted operation in big cities, where there is a lot of interference. And the instruction and installation guide will simplify the installation process. In addition, the alarm can be assigned to a specific car. And the “autorun” function will simplify the life of many motorists. Thanks to the presence of the transmitter, you can use many service functions of the car at a distance. The transfer is carried out by a special encrypted code. This provides additional protection against code grabbers. Plus, the code is transmitted at jumping frequencies.

Car alarms can be installed both independently and in those. services. The reason is that starline a92 dialog CAN flex has a standard design. But with self-installation, it is imperative to know the device of the car well, not only in theory. In addition, you need to be patient, time and measuring equipment in order to properly connect the wires that supply power and control autorun.

What is included

The kit contains:

wires
Two key rings. One with LCD screen, the other without;
CBS (Central Signaling Unit);
Transceiver (provides communication between the key fob and the CBS);
Hood button
Light-emitting diode;
Service button;
Engine temperature sensor;
Installation instructions;
User guide;
User manual.

The kit comes with two remotes. The second is a spare. No one is immune from unexpected unpleasant incidents. Breakage or loss will not leave the motorist without remote control of the car. True, the second key fob does not have a screen, which is certainly inconvenient. But buying another key fob and "teach" it a special car code is not difficult.

The central signaling unit is the "brain" of the entire system. It receives a signal, decrypts it and performs a specific task. The transceiver is usually mounted on the windshield. With its help, the code is received and transmitted from the remote control to the CBS. The hood button is necessary so that the owner has free access to this part of the car. In addition, the alarm housing is installed next to the fuses, and the limit switch is above the left headlight. This provides additional protection against hacking. The limit switch is needed in order to send a signal to the remote control in case of unauthorized opening of the hood.

The LED informs the owner that the alarm is working. The service button starline a92 dialog can flex performs the same functions as the button on the key fob. The instruction manual and installation manual help you to cope with the installation and use. But in order for autorun control to occur correctly, it is best to contact specialized tech. Services.

The key fob transmitter is an important thing for protecting the car and managing its service capabilities. Therefore, its appearance and properties meet all the requirements of the owner. And this means that the case is made in accordance with the requirements of convenience. A comfortable fit in the hand isn't everything. The keychain has such a shape that the owner simply and quickly finds the right buttons by touch. The keys themselves are comfortable, informative, and notify the owner that the selected command has been completed. Often it's just a click after a click.

The batteries in the Starline A91 remote control are standard. Therefore, their replacement will not be a headache for the owner. And you should also know that all modifications of the key fob differ from each other in design, and their appearance indicates the perfection of the system in terms of technical capabilities.

StarLine А92 Dialog and wish you successful and safe trips!

PLEASE READ CAREFULLY!

Installation of car alarms must be carried out by qualified specialists. A car alarm is a complex technical device that involves connecting to car circuits related to engine operation.

If an icon appears on the key fob display warning about the low battery of the key fob, take measures in advance to replace the battery. We recommend that you store a new spare battery in the vehicle, keeping its original packaging.

Read this manual carefully, paying particular attention to sections marked with (ATTENTION!).

Mandatory safety measures when using the engine start function:

It must be remembered that the car is a means of increased danger. Section 12.8. of the rules of the road states: "The driver may leave his place or leave the vehicle if he has taken the necessary measures to prevent spontaneous movement vehicle or use it in the absence of the driver.

Before use StarLine car alarms A92 Dialog read the measures carefully safe use functions of remote or automatic start of the engine, set out below:

Always park your vehicle in an open, well-ventilated area.
Always apply the parking brake, which must be in good condition and prevent the vehicle from moving.
When leaving the vehicle, be sure to set the automatic transmission control lever to the “PARK” position and the manual transmission shift lever to the neutral position.
If your vehicle is equipped with a manual transmission, be sure to follow the “programmed neutral” engine start preparation procedure before enabling the remote or automatic engine start function.
Never start the car engine in the absence of the driver, if someone is in front of the car or behind it.
Never pass car alarm control key fobs to children, as well as to other persons without first reading the instruction manual.
On vehicles with manual box transmission, it is not recommended to start the engine remotely or automatically if the car is out of sight and the user of the car alarm is not able to control the process of starting the engine.
Before enabling the remote or automatic engine start function:

make sure the car is in good condition
make sure you have enough fuel, oil, coolant, etc.
turn off the windshield wipers
set the operating parameters of the interior heater (air conditioner), glass heating and other accessories to required levels
set the interior airflow control to air circulation, which will allow you to more efficiently warm or cool the air in the car

Introduction

StarLine A92 Dialog is a modern car security system. Protective properties systems are implemented using innovative technologies.

Specifications

Carrier frequency of the control radio signal. . . . . . . . . . . . . . . . . . . . . . . . 433.075 to 434.775 MHz
Number of frequency control channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Maximum range of the main key fob:
- - in the mode of sending commands to the signaling unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 m*
- - in the mode of receiving signals from the signaling unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 m*
The maximum range of the additional key fob. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 m*
Type of shock sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . piezoelectric
Working temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . from -40 to +85 °С
DC supply voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 18 V
The current consumed by the alarm in armed mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . no more than 25 mA

The maximum allowable current at the outputs:

siren connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 A
connection of light signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2x 7.5 A
control of electric drives of door locks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 A
turning on the ignition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25/30 A
inclusion of accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25/30 A
turning on the starter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25/30 A
built-in engine lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 A
engine lock control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mA
additional control channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mA

Power supply of the main keychain. 1.5V (1 AAA battery)
Power supply for an additional key fob. 3V (1 battery type "CR2450")

* The range of the key fobs may decrease depending on the installation location of the transceiver, the location of the vehicle and the user, radio frequency interference, weather conditions, straining car battery and voltage of the key fob battery.

StarLine A92 Dialog is approved for use on the territory of the Russian Federation and meets all the requirements of regulatory documents of the Russian Federation. The service life of StarLine A92 Dialog is 5 years, provided that the product is installed and operated in accordance with the installation and operating instructions.

Security and

Protected areas of the car and ways to control them

Engine - interlock relay

Signal security

Dialog code"Quick Dialogue" control with individual encryption keys eliminates intelligent electronic hacking

Protective and anti-theft functions signaling

Mode silent security
Immobilizer mode
Anti-robbery mode
Panic mode

Self-diagnosis and indication of operating modes

Service alarm functions

Vehicle search mode
Service mode
Remote programming of alarm modes and functions

Engine start functions

Automatic start engine by temperature, by alarm clock, periodic start every 2, 3, 4 or 24 hours.

Alarm control with key fobs

Alarm control keyfobs

The system is equipped with two remote controls:

4-button remote control with feedback and liquid crystal (LCD) display

3-button key fob without display

Main and additional key chains equivalent in terms of cryptographic strength.

To transmit control commands in both key fobs, a special encryption algorithm "Quick Dialogue" is used, which excludes intelligent electronic hacking.

In addition, the key fob LCD displays information about the current time, the alarm, the battery voltage and the temperature in the car.

The duration of pressing the remote control buttons

Short press- one press of a button (or two buttons) lasting less than 0.5 seconds.
Long press- pressing and holding a button (or two buttons) until a melodic sound signal appears.
Double press - two presses of the same button within 0.5 seconds.
Consecutive pressing- two presses of one or different buttons. The first press should be long (until the sound signal appears), the second press - short (after releasing the first button).

Key fob commands

2 or 3 short

LCD key fob display

Indication of modes and functions

Checking the alarm status

Service mode

Disabling the sensor by levels

Arming and disarming with confirmation signals

Enabling/disabling the silent security mode

Starting and stopping the engine

Enabling automatic periodic start mode

Enabling automatic start by temperature

Enabling anti-robbery mode

Alarm and car status indication

Armed mode with audible alarms

Silent mode enabled

Door locks closed

Door locks open

Doors, hood, trunk open

Parking brake not applied / foot brake applied

Key fob battery needs to be replaced

Call from the car

Transmission of control commands

Silent keychain mode

The 2nd level of the shock sensor has been triggered

Main key fob function menu

The function menu of the main key fob allows you to make the following settings:

set current time
set alarm time
turn the alarm on or off
select the silent mode of the key fob (vibration mode)

To enter the key fob function menu, press and hold button 4 until 1 melodic, then 2 short beeps appear

the clock digits of the current time will flash
within 8 seconds, start setting the clock:

Briefly press button 4 to

go to minute setting

the minute digits of the current time will flash:

button 2 - increases readings

button 3 - decrease readings

Briefly press button 4 to

go to clock setting

the alarm clock digits are flashing:

button 2 - increases readings

button 3 - decrease readings

Briefly press button 4 to

go to minute setting

the minute digits of the alarm flash:

button 2 - increases readings

button 3 - decrease readings

Briefly press button 4 to

the alarm icon flashes:

button 2 - turns on the alarm (ON)

button 3 - turns off the alarm (OFF)

Briefly press button 4 to

transition to on/off

the silent mode icon flashes:

button 2 - mode activation

button 3 - mode off

(in silent mode, there are no beeps from the key fob)

If within 8 seconds there are no button presses, the key fob functions programming mode will be automatically exited.

Cursor way to control the alarm

Alarm management (turning on/off various functions and modes) is carried out by the cursor method. The cursor is a blinking illumination of one of the icons on the key fob display. The mode or function that can be enabled (or disabled) at the moment is determined by the icon where the cursor is located.

In order to select the desired function, move the cursor to the corresponding icon:

Briefly press button 4

2 or more times to start

the cursor will move from icon to icon
pause and press again change the direction of the cursor

Short press button 4

move the flashing cursor to

To enable the selected

function or mode click

short button 3 keyfobs

To turn off the selected

function or mode click

short button 2 keyfobs

If within 2 seconds there is no pressing the button 4, then there will be an automatic exit from the cursor movement mode.

List of functions and modes activated by the cursor method

Activation of an additional channel "trunk opening"

Activation of additional channel No. 1

Checking the status of the alarm, monitoring the voltage of the battery and the temperature of the car interior

Service mode (designed to temporarily disable security and anti-theft functions)

Disabling the sensor by levels

Arming with audible confirmation signals

Switching on the "quiet" protection mode

Engine starting

Alarm engine start mode Intermittent start mode

Engine start mode by temperature

Activation of additional channel No. 2

Enabling the "anti-robbery" mode

For more information about the operation of the listed modes and functions, see the relevant sections of the manual.

Security and anti-theft functions of car alarms

Arming with sound confirmation signals

ignition off
parking brake on

Short press button 1 of the key fob

1 siren signal
1 light signal
door locks will close

Arming without sound confirmation signals

Before arming, make sure that:

ignition off
parking brake on
doors, hood and trunk closed

Press briefly 2 times button 1 of the key fob

1 light signal
door locks will close
led indicator starts flashing

If the doors, hood, trunk turn out to be poorly closed, and the parking brake is not tightened (or the foot brake is pressed), or one of the door, hood, trunk limit switches is faulty (permanently closed), then the alarm will warn about this 4 siren signals and 4 light signals(See "Self-diagnosis when arming").

Silent security activation

In mode silent security when any of the security sensors no car siren signals.

The state of "alarm" is accompanied only by light signals.

Place the cursor on the icon and briefly press the button 3 of the key fob

1 light signal
door locks will close
the LED indicator will start flashing

Automatic arming

For automatic arming function 4 tab. #1 must be programmed for option 1 or 2.

At closed doors turn off the ignition, get out of the car and close all doors

when closing the last door:

1 siren will sound
light signals flash 1 time

10 seconds after closing the last door, the security mode will automatically turn on

1 light signal
1 siren signal
door locks will close (depends on the state of function 4, tab. No. 1)

If automatic arming is programmed DO NOT FORGET keys and key fob in the car when you leave it!

If one of the door pushbutton switches is faulty (permanently closed), then automatic arming will not occur(see “Checking the health of the limit switches”).

If the parking brake is not on, the hood or trunk is open, then after the security is turned on, will follow.

Arming with the engine running

Before arming, make sure that:

hood closed
the car is in neutral gear (or in PARK mode with automatic transmission)
engine running

Set the parking brake and open the door

Place the cursor on the icon or and briefly press the button 2 of the keyfob

Remove the key from the ignition, get out of the car, close all doors and press button 1 on the key fob

1 siren signal
1 light signal
door locks will close
after the set operating time has elapsed, the engine will be stopped without disarming

If the parking brake is not applied or the hood is open, then after pressing button 2 on the key fob (point 2) the indication of the remaining engine operation time (r10, r20, r30, or r99) will NOT appear on the key fob display (two sound signal keychain).

The engine running time is determined by function 2 tab. No. 2.

If 10, 20 and 30 minutes are selected, the remaining engine time is updated every minute (eg r10, r09, r08, . r00).

If "no limit" is selected, the display will show "r99" permanently.

Remote engine stop without disarming

Place the cursor on the icon and briefly press the button 2 keyfobs

3 lights
the LED indicator will start flashing
engine will be stopped

Arming without a key fob

Before arming without a key fob, make sure that:

ignition off
parking brake on
doors, hood and trunk closed

Open the driver's door and turn on the ignition

the status LED will flash

Press the service button 3 times and turn off the ignition

will follow: 1 siren and 1 light signal
a 20-second interval countdown will begin, after which the security mode will automatically turn on

Get out of the car and close all doors

20 seconds after turning off the ignition

security mode will automatically turn on:

the siren will sound 1 time, the light signals will flash 1 time
door locks will close

If at the time of arming it turns out that the doors, hood or trunk are poorly closed, or one of the push-button switches of the doors, hood, trunk is faulty (permanently closed), then the alarm system will disarm this zone, followed by 4 siren signals and 4 light signals.

Automatic return to armed mode

If an automatic return to the armed mode is programmed (function 5 of tab. No. 1) and within 30 seconds after disarming the car doors are not opened, the alarm system will automatically re-arm the armed mode.

Attention! Locking of door locks will occur if they are connected to the alarm system and the option of automatic return to armed mode with locking of door locks is programmed (function 5 of Table No. 1). Reactivation of the guard will be confirmed by 1 siren signal and 1 flash of light signals; 1 beep will follow. The engine will be blocked. The LED indicator will start flashing to indicate that the vehicle is guarded.

If faulty Limit switches doors, hood or trunk, then after the re-arming, 4 light signals and 4 siren signals will follow.

1 beep will sound.

Interior light bypass (sensor activation delay)

The sensor activation delay may be necessary to bypass the door zone while the car interior lights fade out, or to calm down the shock or volume sensors. Otherwise, when arming, false warning signals may follow. Depending on the programming (function 3, tab. No. 1), a 5, 30 or 60 second delay can be set.

Self-diagnosis when arming

When arming, the alarm automatically checks all zones that must be armed.

doors, hood or trunk are not properly closed
parking brake not engaged
defective (permanently closed) one of the door, hood or trunk limit switches

Arm the security mode by pressing button 1 of the key fob

4 siren signals
4 lights
the corresponding zone is temporarily excluded from the security loop

Close doors, hood, trunk

the corresponding zone will be armed
when the doors are closed, the locks will be re-locked

In case of spontaneous elimination of a malfunction with the armed mode on, the alarm system will immediately automatically arm this zone.

Disarming with audible confirmation signals

Press button 1 on the key fob

Place the cursor on the icon

and shortly press button 2 of the key fob

2 siren signals
2 lights
door locks will open

Disarming without sound confirmation signals

Press button 1 on the key fob

Place the cursor on the icon and press the keyfob button 2

2 lights
door locks will open
LED indicator will turn off

If, when disarming, there are 3 siren signals and 3 light signals, this means that in the armed mode, the sensors were triggered (see "Self-diagnosis when disarming").

Disarming without using a key fob

Open the car door with the key

alarms will start (if the armed mode was turned on by the key fob)
light signals will flash 4 times (if the armed mode was turned on without a key fob)

Within 20 seconds, turn on the ignition and enter private idintifier

After entering the last digit of the code

and turn off the ignition:

2 siren signals
2 lights
security mode will turn off

If, when disarming, there are 3 siren signals and 3 light signals, this means that in the armed mode, the sensors were triggered (see "Self-diagnosis when disarming").

Disarming with the engine running

Open the driver's door and turn on the ignition with the key

engine keeps running

Release the parking brake

3 lights
engine keeps running

The car is ready to move

Self-diagnosis when disarming

When the guard is turned off, the alarm informs about the triggering of sensors that occurred during the guard

Turn off the security mode in one of the ways

2 siren signals
2 lights

3 siren signals
3 lights

Alarms

If any of the security sensors are triggered in the armed mode, this will cause automatic switch on alarm signals: siren signals and light signals.

The keyfob will sound alarms, and the display will show the reason for the alarm. While the siren is sounding, the icon corresponding to the cause of the activation will flash on the keyfob display. Alarms are given in cycles. The duration of one alarm cycle and the maximum possible number of cycles for various reasons alarms are shown in the table below.

1 level shock sensor

3 sounds. signal

6 light. signals

Level 2 shock sensor

20 sec. sound and

While the car's lights are flashing, the car's headlights will also flash on the key fob display.
If, after the end of the alarm cycle, the cause of the alarm is not eliminated (for example, the doors remain open), then the corresponding zone will be temporarily excluded from the security circuit until the cause of the alarm is eliminated (for example, until the doors are closed). At the same time, on the display of the key fob, the indication of the reason for the operation is preserved.
If the alarms were interrupted from the key fob, then the count of the number of alarm cycles with a periodically triggered sensor starts anew.

Displaying alarms on the keyfob display

triggered level 1 shock sensor

triggered level 1 shock sensor

operated hand brake

doors were opening

the hood opened

opened the trunk

ignition on

Interruption of alarms without disarming

alarms enabled
the sensor of any of the security zones has been triggered

Press button 1 on the key fob

Place the cursor on the icon or and press button 2 (or 3) of the key fob

alarms will stop
triggered sensor will be temporarily excluded from the security circuit

Power failure alarm protection

A short-term disconnection of the alarm power supply (for example, resetting the battery terminal) does not lead to disarming. The alarm remembers its state and when the power is restored, it will again be in the same mode in which the shutdown occurred (see the status table below).

When power is restored

3 flashes will follow
the key fob will give a melodic sound signal

If a self-powered siren is connected to the system, then when the battery terminal is disconnected, the siren will sound alarms.

Armed mode off

Armed mode enabled

Alarm mode, the cause of the operation has been eliminated

Armed mode enabled

Immobilizer mode enabled

Anti-robbery mode enabled

Service mode enabled

Anti-robbery mode

The anti-robbery mode can only be enabled with the appropriate programming of the function 8 tab. No. 1.

Enabling anti-robbery mode with a key fob

Attention. After turning on the anti-robbery mode with a key fob, it is IMPOSSIBLE to turn it off with a key fob.

To turn it off, you must enter a personal code.

With the ignition on or with the engine running, press and hold buttons 1 and 3 of the remote control simultaneously (until a beep sounds)

permanent sound and light alarms will turn on
door locks will close
intermittent blocking of the engine will begin;

during the first 45 seconds, blocking occurs in impulses, then the engine will be blocked permanently.

Hidden activation of the anti-robbery mode

Hidden inclusion of the anti-robbery mode can be used in a situation where it is difficult or impossible to counteract in other ways.

The mode is activated when the doors are opened in case the owner leaves the car, after which the system operates automatically according to a certain algorithm, consisting of several stages.

Close the car doors. With the engine running or ignition on, press the service button for 2 seconds

After pressing the service button, the standby mode is activated in which the alarm waits for the doors to be opened. There is no indication that the standby mode is on. The standby mode can continue indefinitely. As long as all doors remain closed, the alarm has no effect on vehicle functions. After opening one of the doors, the second stage of the anti-robbery algorithm is automatically activated

open one of the doors

There are no alarms at this stage, blocking is disabled. From the moment the door is opened, a 60-second time interval has begun, after which the alarms will be activated. You can make sure that the second stage of the anti-robbery mode is enabled by double-clicking button 3 on the key fob. The anti-robbery mode icon will flash on the display.

60 seconds elapsed after doors were opened

intermittent siren sounds and alarm lights will start, which will last 30 seconds

30 seconds elapsed after the start of intermittent beeps

siren sounds will be on
intermittent engine blocking will be activated immediately or after the handbrake is released (pressing the brake pedal)
warning lights continue

45 seconds elapsed after intermittent engine lockout started

constant sound and light alarms continue
permanent engine blocking

Attention. If you need to disembark passengers, and the anti-robbery mode is on, turn off the anti-robbery mode before opening the doors.

Otherwise, 1 minute after any door is opened, alarms will start. Even if you forgot about it, you can turn off the anti-robbery mode with the key fob at stages 1, 2 and 3 (until intermittent engine blocking is enabled).

Disabling anti-robbery mode

Attention. If the anti-robbery mode was enabled by the key fob, you can turn it off:

Open the car door and enter the personal code

2 lights
2 siren signals
door locks will open

2 beeps
the anti-robbery icon will disappear

Attention. If the anti-robbery mode was turned on by the service button, then at stages 1, 2 and 3 (until intermittent engine blocking starts), it can be turned off with a key fob:

Press button 1 on the key fob twice (with an interval of more than 1 second)

Place the cursor on the icon or and briefly press the button 2 of the remote control

After the start of intermittent engine blocking, you can turn off the anti-robbery mode only by entering a personal code

Panic mode

With the ignition off, simultaneously and long press buttons 1 and 3 of the remote control

sound and light alarms will turn on for 15 seconds
door locks will close
the security mode will be activated (if the security was disarmed)

After the end of the light and sound alarm signals, the armed mode will remain on.

To interrupt alarms, place the cursor on the icon or and briefly press button 2.

Light and sound alarms will stop.

The security mode will remain enabled.

Immobilizer mode

To use the immobilizer mode, function 6 tab. #1 must be programmed for option 2, 3 or 4.

When the immobilizer mode is programmed, the engine will be blocked automatically, 30 seconds after each ignition is turned off.

To turn off the engine blocking that occurred in the immobilizer mode - press the service button for 2 seconds, then turn on the ignition

Service alarm functions

Monitoring the state of the car, battery voltage, interior temperature

You can use this command in any mode to check the current state of the alarm, check the battery voltage and temperature in the car:

Press 2 times briefly the button 3 of the key fob

Place the cursor on the icon

and press button 2 (or 3) of the key fob

a chime will sound
the display will briefly show first the value of the battery voltage of the car, then the temperature value in the car
if the temperature is below -40°C or above +70°C, the display will look as shown on page 51

The interior temperature sensor is located in the central alarm unit. Therefore, the temperature displayed on the key fob display may differ from the actual temperature in the cabin, as it depends on the installation location of the central unit.

Finding a car in a parking lot and monitoring engine temperature

You can use this command in any mode to search for a car in the parking lot and control the engine temperature

Press button 1 of the key fob first for a long time, until a beep appears, then briefly

the alarm will indicate the location of the car with six light signals
6 siren sounds

Indication at temperatures below -40°C

Indication at temperatures above + 70° C

The temperature displayed on the key fob display may differ from the actual engine temperature, as it depends on the location of the temperature sensor.

Temporary shutdown of the shock sensor

2 lights
the first level of the shock sensor will turn off

a chime will sound
there will be an indication of the first (warning) level of the shock sensor being disabled

In armed mode, place the cursor on the icon

and briefly press button 2 or 3

3 lights
both levels of the shock sensor will be disabled

3 beeps
both levels of the shock sensor will be disabled

In guard mode. The shock sensor will be enabled again

During one security cycle, you can turn off the shock sensor by levels and turn it back on an unlimited number of times.

Automatic control of door locks

As additional features comfort and safety, a choice of four options automatic control door locks when the ignition is turned on (off).

Control options are defined by programmable function 2 tab. No. 1.

The locks are closed when the parking brake is released (with the ignition on)

The locks close 10 seconds after the ignition is switched on

Open when ignition is off

The locks close 10 seconds after the ignition is turned on

Automatic lock control off

Remote control of door locks

With the ignition on, place the cursor on the icon or and briefly press button 3

door locks will close

1 beep
indication of closed door locks and ignition on

With the ignition on, press button 1 on the key fob

With the ignition on, place the cursor on the icon or and briefly press button 2

door locks will open

2 beeps
indication of open door locks and ignition on

Management of the additional channel "trunk opening" ()

Options for this channel are determined by the programmable function 12 tab. No. 1.

The channel is activated the same actions, regardless of the option chosen:

Place the cursor on the icon and briefly press button 2 or 3

3 lights

3 beeps

3 lights
trunk lock will open

3 beeps

3 lights
trunk lock will open
shock sensor will be disabled

3 beeps
indication of an open trunk and a disabled shock sensor

After loading (unloading) things, close the trunk

trunk area and shock sensors will be armed after 5 seconds

1 beep
the indication of an open trunk and a disabled shock sensor will disappear

If the trunk does not open when the channel is activated, then the indication of an open trunk and disabled sensors on the key fob display will not follow.

After 20 seconds, the trunk area will be armed again.

signal duration from 1 to 120 sec

View additional equipment connected to this channel is specified when setting the alarm.

Additional channel control #1

The options for the operation of the additional channel No. 1 are determined by the programmable function 13, table No. 1.

two step door unlocking

Turn off the security mode in one of the ways

LED indicator will turn off
2 siren signals
2 lights
lock will be opened

2 beeps
the indication of the disarmed mode will appear

To unlock other doors, place the cursor on the icon or and briefly press the button 2

2 lights
other doors will open

For two-step unlocking, the driver's door actuator and the other door actuators must be wired according to the two-step unlocking diagram (see installation manual).

signal duration from 1 to 120 sec

For options 2 or 3, the channel can be programmed for any fixed duration of operation from 1 to 120 seconds. If option 2 is selected, then the shock sensor is disabled during the operation of the additional channel.

If option 3 is selected, the shock sensor is NOT disabled.

To activate the channel in case of options 2 or 3, place the cursor on the icon and briefly press button 2 or 3

3 lights

3 beeps

In the "latch" mode, the channel is controlled as follows: place the cursor on the icon, button 3 - turn on the channel, button 2 - turn off the channel.

The type of additional equipment connected to channel No. 2 is specified when installing the alarm.

Additional channel control #2

Options for the operation of additional channel No. 2 are determined by the programmable function 14 tab. No. 1.

For options 1, 2 or 3, channel activation is done as follows:

Place the cursor on the icon and briefly press button 2 or 3

3 lights

3 beeps

signal duration fixed: 0.8 sec

signal duration from 1 to 120 sec

If option 3 is selected, the shock sensor is NOT disabled.

In the "latch" mode, the channel is controlled as follows: place the cursor on the icon, button 3 - turn on the channel, button 2 - turn off the channel.

The type of additional equipment connected to channel No. 2 is specified when installing the alarm.

Additional channel control #3

Options for the operation of the additional channel are determined by the programmable function 11 tab. No. 1.

The channel can be programmed for any fixed duration from 1 to 120 s.

The channel is activated automatically.

There are 4 options for the operation of additional channel No. 3:

The channel is activated when the guard is turned on

The channel is activated when disarming

The channel is activated when the guard is turned on and off

The channel is activated when the security is turned off or when the ignition is turned off.

The type of additional equipment connected to channel No. 3 is specified when installing the alarm.

Turbo timer mode

For turbocharged vehicles special mode a turbo timer that allows you to keep the engine running after turning off the ignition with the key for some time, necessary to reduce the speed of rotation of the turbine.

Turbo Timer Programming

To use turbo timer mode

Function 1 tab. #2 must be programmed for options 2, 3 or 4

Function 10 tab. #2 must be programmed for one of the ignition support methods.

Switching on the turbo timer

The vehicle is in neutral (or in PARK if the transmission is automatic)

Hood closed, engine running

Depending on the selected method of ignition support (function 10, tab. No. 2), the turbo timer can be turned on in the following ways:

Apply the parking brake and turn off the ignition

Apply the parking brake

the LED indicator will turn on continuously

a chime will sound
the remaining engine run time will be displayed: r01, r03 or r06

Remove the key from the ignition

If you need to turn on the security - get out of the car, close all doors and turn on the security mode in one of the ways

1 siren signal
1 light signal
shock sensor and ignition zone control will be disabled
door locks will close

1 beep
indication of a running engine and the armed mode

After the end of the set time of the turbo timer (function 1, tab. No. 2), the engine will be turned off, and the ignition and shock sensor zones will be armed.

Call from the car

To transmit a call signal from the car to the alarm key fob, press the "CALL" button located on the body of the transceiver module

3 lights

call indication will appear
20 seconds the call signal will sound

To interrupt the call signal, press any button on the key fob

Light indication of open doors

If the programmable function 9 tab. 1 is on, the flashing lights will warn you that the doors are open. The duration of the warning lights can be programmed to 10, 20 or 30 seconds.

Battery charge control of key fob with LCD

The control of the battery charge of the key fob is carried out with each press of the key fob buttons

when the key fob battery is discharged to a critical level, an icon will appear
the battery needs to be replaced

Checking the health of limit switches

The alarm provides the ability to control the serviceability of the door, hood and trunk limit switches when the security mode is off. Opening the doors, hood and trunk with the ignition on should be accompanied by periodic flashes of the status LED.

If no flashes of the indicator are observed when they are opened, then the corresponding limit switch is faulty.

The serviceability of the limit switches, as well as the correct connection of the "ignition" circuit, can be checked using the indication on the key fob:

Open the door, hood, trunk, turn off the parking brake and turn on the ignition. Double short press button 3 of the key fob

the display will show the status of the above protection zones

Check each zone in sequence:

Close the doors, briefly press button 3 twice

Close the hood, briefly press button 3 twice

Close the trunk, briefly press button 3 twice

Engage the handbrake, briefly press button 3 twice

Switch off the ignition, briefly press button 3 twice

Each time you check the status on the key fob, the icons of the corresponding security zones should disappear.

Service mode

To temporarily disable anti-theft and security functions signaling, for example, when the car is transferred to the station Maintenance it is recommended to enable service mode

To enable the mode, place the cursor on the icon and briefly press the button 3

1 light signal

a chime will sound
the icon will be permanently displayed

In the service mode, the functions of remote control of door locks and control additional channels. Recording key fobs, programming and changing the personal code is prohibited. Service mode CANNOT be activated when armed.

To turn off the mode, place the cursor on the icon and briefly press the button 2

2 lights

a chime will sound
permanent display of the icon will stop

Key fob button lock

To turn on the blocking of the key fob buttons, simultaneously briefly press the buttons 2 and 4 of the key fob

a short beep will sound
for 2 seconds the display will show:
lock will turn on

To turn off the blocking of the key fob buttons, simultaneously briefly press the buttons 1 and 4 of the key fob

1 beep
short vibration signal
the lock will turn off

Recording keyfob codes

Key fob codes are recorded when the security mode is off in the following order:

Press the service button 7 times and turn on the ignition

7 siren signals will sound, confirming entry into the keyfob code recording mode

Press buttons 1 and 2 of the key fob simultaneously and briefly

1 siren signal

1 beep

Repeat step 2 for all writable key fobs. The interval between the recording of each key fob should not exceed 5 seconds.

Successful recording of each new key fob is confirmed by the corresponding number of siren signals.

Attention! In total, up to 4 key fobs can be recorded in the alarm memory. When writing new key fobs, it is necessary to overwrite the old ones, otherwise they will be deleted from the alarm memory.

To record a 3-button keychain without a display, a combination of buttons 1 and 2 is also used.

Controlling the number of key fobs recorded in the system

With the ignition on and the doors closed

double short press button 3 of the key fob
or: place the cursor on the icon and briefly press button 2 (or 3) of the key fob

The number of flashes of the status LED will correspond to the number of key fobs stored in the alarm memory.

Personal emergency disarm code

The personal code for emergency disarming or anti-robbery mode can consist of 1, 2 or 3 digits, each of which can take a value from 1 to 6 inclusive. The procedure for programming a personal code is described in the installation manual.

Upon delivery (or after resetting to “factory settings”), the personal code is “3” (see function 9 in Table No. 1).

Algorithm for entering a personal emergency shutdown code

Open the door with the key and leave it open

alarms will start (if the security was turned on by the key fob)
4 light signals will flash (if the security was turned on without a key fob)
no signals will follow (if the armed mode is off)

Turn on the ignition. Press the service button a number of times equal to the first digit of the code. Turn off the ignition

if the code is 1-digit and it is entered correctly, then the alarm will turn off the security mode, 2 light signals will follow
in case of 2 or 3 digit code - enter the following digit:

Turn on the ignition. Press the service button a number of times equal to the second digit of the code. Turn off the ignition

if the code is 2-digit and it is entered correctly, then the alarm will turn off the security mode, 2 light signals will follow
in the case of a 3-digit code - enter the following number:

Turn on the ignition. Press the service button a number of times equal to the third digit of the code. Turn off the ignition

if the code is 3-digit and it is entered correctly, then the alarm will turn off the security mode, 2 light signals will follow

Before starting the engine with the key fob or activating automatic starts in without fail Familiarize yourself with the following features of the engine start functions:

Features of remote engine start

Remote engine start cannot be carried out in the following cases:

ignition on
hood open
parking brake released or foot brake applied
preparation for starting the engine on vehicles with manual transmission has not been completed

In one start cycle, the system can make 4 attempts to start the engine. If after the 4th attempt the engine does not start, then the display of the key fob with feedback (provided that it is in the reception area) will display "" and the key fob will give 4 beeps, indicating the end of attempts to start the engine. 4 flashes will follow.

If a running engine stalls before the programmed warm-up time has elapsed, a new engine start cycle will be attempted.

The automatic engine start function by temperature can be enabled regardless of the state of the alarm or timer auto engine start functions.

Preparing for Remote Start on Manual Transmission Vehicles

Before starting the engine on vehicles with manual transmission, it is necessary to perform the procedure "software neutral". Software neutral is a specific course of action for the driver to ensure that remote start will not occur when the transmission is on.

Execution of software neutral

To perform software neutral

function 10 tab. #2 must be programmed to one of possible ways ignition support
the engine must be running

Depending on the selected ignition support method, the following options for implementing a software neutral are possible:

Apply the parking brake.

“FROM KEYFOB”: with the doors closed - apply the parking brake and press button 2 of the keyfob (the cursor should be placed on the icon or)

Apply the parking brake

1 light signal
the LED indicator will turn on permanently
engine keeps running

a chime will sound
the display will show: r99

if the turbo timer mode is programmed, it will display: r01, r03 or r06

Switch off the ignition and remove the key from the lock. The engine continues to run. Get out of the car and close all doors

Turn on the security mode in one of the ways

if turbo timer mode not programmed:

1 siren signal
1 light signal
door locks will close
the engine will stop

1 beep

engine ready for remote start

if turbo timer mode programmed:

engine keeps running

the armed mode indication will appear
indication of the running engine and the remaining time of the turbo timer

After the end of the turbo timer, the engine is ready for remote start.

Remote engine start key fob

Before remote start, make sure that

hood closed, parking brake applied
for cars with a manual transmission, the “software neutral” procedure was performed
for vehicles with automatic transmission- control lever in the "PARK" position

For remote start engine, place the cursor on the icon and briefly press button 3

1 siren signal
1 light signal
door locks will close
the security mode will turn on (depends on the state of the function 5 tab. No. 2)
engine start cycle starts

a chime will sound
an indication of the beginning of the engine start cycle will appear:

then - indication of the running engine and the remaining time of the engine:

(r10, r20, r30 or r99)

The remaining engine time is updated every minute (for example: r10, r09, r08, r07.).

1 minute before the end of the engine warm-up, the inscription r01 will be displayed and 2 series of 4 sound signals from the key fob will sound. After the engine warm-up time has elapsed and the engine stops automatically, the warning lights will flash 4 times.

The r00 icon will briefly appear on the keyfob display, 4 keyfob beeps will sound.

In one start cycle, the system can make 4 attempts to start the engine. If after the 4th attempt the engine does not start, then on the display of the key fob with feedback (provided that it is in the reception area) the inscription "" will be displayed, and the key fob will give 4 beeps, indicating the end of attempts to start the engine.

4 flashes will follow.

Remote engine stop

If necessary, the engine started automatically or from the key fob can be stopped at any time from the key fob:

Place the cursor on the icon and briefly press button 2

4 lights
engine will be stopped
security mode will remain on

a chime will sound
engine running indication disappears
armed mode indication

Remote engine extension

If necessary, the operating time of the engine started automatically or from the key fob can be extended.

engine running

indication of remaining engine time

To prolong the operation of the engine, place the cursor on the icon and briefly press the button 3

1 light signal
engine keeps running

a chime will sound
the remaining engine time will increase by 5 minutes

You can extend the operation of the engine an unlimited number of times. The maximum time that can be set on the key fob with multiple extension attempts is 30 minutes.

Preparing to drive after remote start

Turn off the security mode in one of the ways

Enter the car and turn on the ignition with the key

engine keeps running

disarmed mode will be displayed

Release the parking brake

3 lights
engine keeps running

4 beeps
an indication of the disabled handbrake and the ignition on will appear

The car is ready to move

Automatic engine start

Automatic engine start by alarm

Before turning on the automatic engine start mode by key fob alarm clock

check that the current time is set correctly on the key fob
program the alarm for the desired start time and turn on the alarm

The enabled alarm mode on the key fob display will be indicated by the icon

To enable autostart by alarm, place the cursor on the icon and briefly press the button 3

1 light signal

a chime will sound
for 5 seconds, the time remaining until the start will be displayed

constantly displayed icons and will indicate the enabled mode of automatic start by alarm clock
after 5 seconds, the current time display will resume

Note:

The presence of a key fob in the coverage area of the transceiver at the time of the engine autostart by alarm is not required.
The start time of the engine may differ from the programmed alarm time within 3 minutes.
The auto-start feature is enabled for one startup cycle. For a new start, it is necessary to activate the autostart from the key fob again each time (“turn on” the icon).

Intermittent engine start

Warm-up duration and engine start period (2,3,4 or 24 hours) are determined by programmable functions 2 and 3 tab. No. 2. The alarm clock must be turned off.

To enable periodic engine start, place the cursor on the icon and briefly press button 3

1 light signal
after a few seconds, the engine will start and warm up for the programmed time

a chime will sound
the icon will be constantly “on” on the keyfob display

after a few seconds - indication of the beginning of the engine start cycle:

after a successful start, the display will show an indication of a running engine:

Automatic engine start based on temperature

The alarm allows you to automatically start the engine when an external temperature sensor fixed on the engine detects a temperature below the programmed temperature (-5°С, -10°С, -20°С or -30°С, function 4, table No. 2). The duration of the engine warm-up is determined by function 2 tab. No. 2.

The alarm monitors the sensor readings immediately from the moment the function is activated.

The minimum interval between repeated autostarts, counted from the moment of the previous start, excluding the engine warm-up time, is 1 hour. After activating the temperature start function, the number of engine autostarts is not limited by temperature.

To enable engine start by temperature, place the cursor on the icon and briefly press button 3

1 light signal

a chime will sound
the icon will be displayed continuously

5 seconds will display the temperature at which the engine will start

then the current time will be displayed again

Turn off automatic starts

To turn off automatic alarm start or periodic start, place the cursor on the icon and briefly press button 2.

The icon will disappear

To turn off automatic engine start based on temperature, place the cursor on the icon and briefly press button 2.

The icon will disappear

Running engine indication after automatic start

Automatic start by temperature can be enabled at the same time as alarm start or periodic start.

For the convenience of determining the mode in which the automatic start occurred, the indication of the engine running after starting has some differences:

automatic start by alarm (1):

automatic periodic start (2):

automatic start by temperature (3):

Programming security and service functions (table No. 1)

Some security and service functions, as well as the parameters of the alarm operation, can be changed using the service button and key fob without the need to access central block. The list of functions is given in the tables. The programming procedure is described in detail in the alarm installation instructions.

We do not recommend doing programming yourself. If such a need arises, contact the specialists who installed the alarm. Changing the programming parameters or resetting to factory settings can cause the engine to block during a normal start, as well as incorrect operation of the standard electrical equipment and the alarm itself.

Programming engine start parameters (table No. 2)

Changing the programming parameters or resetting to factory presets can cause the engine to block during a normal start, as well as incorrect operation of the standard electrical equipment and the alarm itself.

delay 10 sec

delay 20 sec

Factory presets are highlighted in grey.

Remote control batteries and their replacement

Keychains are used various elements supply:

key fob with LCD display uses 1 AAA 1.5 V battery
key fob without display uses 1 “CR2450” 3.0 V battery

The operating time of the remote control batteries depends on the frequency of using the remote control, the frequency of information transmission over the channel feedback, depending on the type of battery installed. The capacities of commercially available batteries may vary by several times.

The average battery life is:

for keychain with LCD display - from 6 to 9 months
for key fob without LCD display - from 9 to 12 months

When the battery of the main key fob is discharged, an icon will appear on its display - the battery needs to be replaced.

Replacing the battery in the key fob with LCD

Press the latch and open the lid battery compartment keychain. Remove the old battery.
Install a new battery, observing its polarity. Correct position The battery is indicated on the key fob body under the cover. Close the fob cover.
After replacing the battery, correct the current time.

Replacing the battery in the key fob without LCD

Slide the battery cover off the key fob and remove the old battery.
Install a new one, observing the polarity. The correct position of the battery is indicated on the contact of the holder
Replace the cover.

Car security system StarLine A92 Dialog with two-way communication and remote engine start “Operating Instructions”

Engine - interlock relay

Doors, hood, trunk, parking brake - limit switches

Body - two-level shock sensor

Ignition - ignition circuit control input

Dialogue control code with individual encryption keys eliminates intelligent electronic hacking

Patented 128 channel narrowband transceiver provides reliable performance in urban interference

Remembering the initial state when the power is turned off and return to the same state when the power is restored

Limiting the number of alarm cycles from sensors

Interruption of alarms without disarming

Security mode with sound and light alarms

Sending alarm signals to the key fob with feedback

Silent guard mode

Guard mode with running engine

Silent arming / disarming

Automatic arming

Arming / disarming without using a key fob

Automatic return to armed mode in case of accidental shutdown

Keeping the engine blocking when dismantling the alarm

Programmable personal emergency shutdown code

Informative keychain with LCD display

Neon lights key fob display

Automatic control of security sensors with disconnection of faulty ones and a message about disconnection

Indication of the alarm status by the LED and on the key fob display

Indication of the status and causes of the alarm for 7 security zones

Indication of a faulty zone when arming

Indication of the fact of alarm activation by sound signals

LED indication of health limit switches

Bypassing the door zone for the delay time of the cabin light going out

Remote shutdown of sensors by levels in armed mode

Remote control of the central lock

Control of the central lock from the ignition switch

Two step door unlocking

Two-pulse unlocking of door locks

Ability to implement the "comfort" function

4 channels of additional equipment control

Car interior lighting control

Vehicle search mode

Call mode from the car (search key fob)

Protection against accidental pressing of key fob buttons

Sound and vibration modes of operation of the main key fob

Separate temperature display in the cabin and under the hood of the car

Vehicle battery voltage indication

Programming new and erasing lost key fobs

Remote programming of modes and functions

Indication of the current time, alarm clock

Remote engine start/stop

Remote work extension running engine

Automatic start of the engine by temperature, by alarm clock,

Periodic run every 2, 3, 4 or 24 hours.

Choice of engine type: gasoline / diesel

Transmission type selection: automatic / manual

Control of engine operation by signals from a tachometer, generator or by a change in the voltage of the on-board network

Automatic starter overwind protection when starting the engine

Indication of the remaining time of the running engine on the key fob display

The main and additional key fobs are equivalent in terms of cryptographic strength. To transmit control commands in both key fobs, a conversational encryption algorithm is used, which excludes intelligent electronic hacking.

Information about the state of the security system is transmitted to the main key fob when

Sensor triggering and alarm occurrence

Execution of commands transmitted from other key fobs

Changing operating modes and alarm functions

at the same time, the display shows the current state of the alarm, sound, vibration signals and the display backlight turn on.

In addition, the key fob LCD displays information about the current time, the alarm, the battery voltage and the temperature in the car.

In order to get the most out of the possibilities provided by the security system, we recommend using the main remote control.

When using abusive and offensive expressions, as well as when expressing disrespect for site visitors, your IP is blocked, the message is deleted. After that, you will not be able to use our site and forum. Let's respect each other!

Installation of a car alarm in Krasnoyarsk

Installation cards

Connecting chipless crawlers Fortin

car alarms

auto literature

Hydronic

News 12 Volt

Helpful information

Forum

Administration coordinates

Guest book

Admin Blog

New

Site news

latest comments

Installing a car alarm on a Hyundai Accent - Connection points, location and colors of wires

Installing a car alarm on a VW Polo - Connection points, location and colors of wires

Installing a car alarm on Lada Granta - Connection points, location and colors of wires

autosiga.ru
car alarms
star line
The main functions of the car alarm Starline A92

All about installing car alarms - Connection points for car alarms.

Self-installation of car alarms, car alarm components and search electrical circuits necessary to connect alarms.

By visiting the site you agree to the Privacy Policy of our resource

StarLine А92 Dialog CAN - dialogue system car protection with integrated CAN interface and smart autorun function.

New in 2010. Reliable car security system with interactive authorization, individual encryption keys, auto start, built-in CAN interface and intelligent auto start function. Designed to work in conditions of extreme urban interference. Designed to protect cars of medium and high price range as part of the StarLine Pobedit security complex.

When developing the StarLine A92 Dialog system, all the advantages of security systems developed earlier were taken into account, and such factors as noise immunity and cryptographic strength of the control signal, the ability to withstand physical overload, operating temperature range, convenience and practicality of operation.

For each instance, a personal key is generated, the parameters of which are unique. This key is written to the alarm unit simultaneously with the key fobs. The use of this technology provides protection against replacement, algorithmic and other types of code grabbers.

Of course, protection is provided not only by the uniqueness of the key. The length of the encryption code and the data transfer rate are also important. All this prevents attempts to interfere with the dialogue exchange between the key fob and the system. The use of an eight-channel transceiver and the “Quick Dialogue” code in the StarLine Dialog series provides the systems with not only high cryptographic strength, but also excellent noise immunity, as well as an increased control and notification range.

New opportunities with FLEX

Preheater control
Automatic folding mirrors
Automatic sunroof closing
“Light” path after arming
Automatic installation of seats for the owner
Automatic return of the steering column to its original position (folding)
Automatic inclusion of low beam headlights when the car is moving (by lowering the hand brake, pressing the brake pedal, after autostart, or when starting the engine)
Turning on the light alarm using the standard alarm controller
Control of additional door locks
Disconnect (connect) additional sensors, supply power to the sensors at the required time
Additional blocking of the engine (imitation of malfunction)
Opening the trunk with disabling the standard alarm
Bonnet lock control (closing)
Additional authorization (immobilizer connection and central lock opening)
Imitation of signals of "intelligent" ignition locks (VW, Mercedes)
Turning off the wipers, radio for the duration of the autorun
Activation of heated seats and heated windows for the duration of the autorun
The second impulse to turn off the ignition in case of unsuccessful autostart on push-button cars
Imitation of the second signal of a starter (with delay)

Features of car alarm StarLine A92 Dialog:

built-in CAN adapter (more than 150 cars)
crypto-resistant signal code "Quick Dialogue" (128 bits long) eliminates intelligent electronic hacking
use of individual encryption keys for each system
"Megapolis" mode (increased range of control and notification)
increased data rate
determining the charge voltage of a car battery
viewing the history of alarms indicating the time of the event
control signal noise immunity
shockproof key fob with two-way communication
ergonomic design and keychain convenience
the antenna module is built into the key fob
comfortable backlight key fob with LCD
key fob sound volume selection and melody selection
intuitive display
russified designations of display icons
large icons
extended temperature range, from - 40 to + 85ºС
complete teamwork with satellite module StarLine Messenger GPS

Benefits for installers:

The algorithm for programming functions has been modernized. Now online on the key fob display you can see the function number and its programmed value.
The management of additional channels has been modernized, allowing you to install StarLine system B62 Dialog for all modern cars.
StarLine B62 Dialog models can be easily transformed into a security and search complex by adding one of the GSM / GPS module StarLine, which will be connected to the alarm by local network through a single 3-pin connector.
To increase anti-theft security, StarLine R2 digital wireless blocking relays can be connected.
More than 50 standard and programmable functions provide the car owner not only reliable protection, but also comfort when using the StarLine A62 Dialog car alarm.

Equipment:

central signaling unit
1 keyfob with two-way communication with LCD
1 keyfob with two-way communication without LCD
2-level shock sensor
transceiver
hood button
Light-emitting diode
service button
set of wires
engine temperature sensor
installation instructions
user manual
user memo

StarLine A92 Dialog CAN systems are compatible with more than 150 car models.

More than 50 standard and programmable functions provide the car owner with not only reliable protection, but also comfort when using the StarLine B92 Dialog CAN car alarm.

List of cars supported by the StarLine A92 Dialog CAN alarm:

A3 (2004--),
A4(2008--),
A5,
A6(2004--),
Q5,
Q7,
Allroad (2006--),
A8(2003--),
A8 (2010--)
Audi TT (2006--);

BMW-1 (E87, 81, 82, 88),
BMW-3 (E90, 91, 92, 93),
BMW-5 (E60, 61),
BMW-6 (E63, 64),
BMW-7 (F01/F02, E65/E66),
BMW X5 (E70),
BMW X6 (E71)
BMW GT

Cadillac Escalade (2007--), SRX, CTS

Chevrolet Cruze Captiva

CITROEN C3, C4, C5, Berlingo (2009--), C-Crosser, C3 Picasso, C4 Picasso, Berlingo (2009--)

Focus (2005--) GHIA,
C-MAX GHIA,
kuga,
smax,
MONDEO (2007--),
Galaxy (2007--)

Honda Accord (2009--), Jazz, Civic, CR-V, Pilot

Hummer H2

Hyundai ix55

Infiniti FX35, FX50, EX35, G35X, G37, M35, M45

KIA Sorento (2010-), Mohave

Land Rover Discovery 4, Range Rover (2010--), Range Rover Sport (2010--)

Lexus LX 570, RX (2009--), Lexus LS460, Lexus GX460

Mazda 2, 3 (2009--), 6 (2008--), CX-7

mercedes benz, body 164, 169, 171, 203, 204, 209, 211, 212, 216, 219, 221, 245, 251, 463, 639, 906

Mini Cooper (2009--)

Mitsubishi Lancer X, Outlander XL, Mitsubishi Colt (2010--)

X-Trail (2007--),
note,
qashqai,
tiida,
Teana (2008--),
murano,
Pathfinder (2004--),
Micra (2003--)

Opel Astra H, Astra J (2010--) Zafira B, Corsa D, Vectra C, Insignia, Antara

Porsche Cayenne, Panamera

Peugeot 207, 308, 407, 4007, Partner (2009--)

seat Altea (2006--), Seat Leon (2006--)

Octavia A5 (2005-2008),
Octavia FL (2009--),
Superb (2009--),
Fabia (2008--),
roomster

Suzuki SX4, Swift (2004--), Grand Vitara (2005--)

Yaris (2005--),
Auris,
Corolla (2006--),
Avensis (2009--),
Camry (2006--),
RAV-4 (2006--),
Land Cruiser 200
Land Cruiser Prado (2010--)

Volkswagen

touareg,
Passat B6,
passat cc,
golf 5,
golf 6,
Jetta (2006--),
Jetta (2010--)
golf Plus,
Caddy (2004--),
touran,
Tiguan,
Multivan T5
Polo (2005--),
Polo (2010--),
scirocco,
crafter

Volvo S-30, S-70, S-40 (2004—), S-60 (2005—), S-80 (2005—), V-70 (2005 - 2008), V-70XC (2005 - 2007), XC-60, XC-70 (2005 -), XC

ALLIGATOR
APS
STARLINE B92 (auto start)
STARLINE B62
STARLINE A92 (autostart)
STARLINE A62
STARLINE B9 Dialog (autorun)
STARLINE B6 Dialog
STARLINE C9 (autostart)
STARLINE C6

STARLINE B9 (autostart)
STARLINE B6
STARLINE A9 (autostart)
KEY FOB STARLINE В6/В9
KEY FOB STARLINE A8/A9
KEY FOB STARLINE C4/C6/C9

StarLine A92 Dialog

StarLine A92 Dialog is an interactive car protection system with an intelligent autorun function.
New in 2010. Reliable car security system with interactive authorization, individual encryption keys, autostart, and intelligent autostart function. Designed to work in conditions of extreme urban interference. Designed to protect cars of medium and high price range as part of the StarLine Pobedit security complex.

In automotive security system implemented a full set of security and service functions, plus:

Dialogue Authorization. Dialog code management with individual 128-bit encryption keys eliminates intelligent electronic hacking, resistant to all existing code grabbers. To protect the code, the most advanced in this moment algorithm dialog coding, as well as the innovative frequency hopping method. In this method, during the transmission of commands, a specialized transceiver repeatedly changes frequencies according to a special program in the period of each message.
A solution of this level, known by the technical term "Frequency Hopping Spread Spectrum", is the first in the world to be used in an alarm control system and is a very significant complication of any attempts to crack the code.

Megapolis mode. Increased range of control and notification, as well as confident operation in conditions of extreme urban radio interference is provided by the use of a 128-channel narrow-band patented transceiver with frequency modulation and a narrow bandwidth. Specialized Program signal processing, narrow-band filters, as well as receiving and transmitting channels optimally distributed along the edges of the 433.92 MHz frequency range, allowed us to improve the signal-to-noise ratio by 8-10 dB and double the range and noise immunity.

Intelligent autorun. StarLine A92 Dialog is designed for remote and automatic engine starts. A special StarLine Smart Start interface controls the process of remote start and operation of any engine. Automatic starts are possible at a predetermined time, when the temperature drops below a predetermined limit, regular periodic ones. In StarLine A92 Dialog, the engine voltage control algorithm has been upgraded, which allows you to reliably register the start of engine operation and simplifies installation, allowing in some cases not to look for tachometer or generator signals.

Ergonomic and reliable keychain. The keyfobs have an innovative design and hidden antenna location. This allows you to increase the reliability of the key fob design and implement an ergonomic control method. The new 4-button control interface adopts the "master button" principle. The easy-to-find main button performs main team alarms — arming mode.

Comfort. Key fobs have an intuitive control principle. All pictograms on the keychain are in Russian. LED illumination provides comfortable work with information on the display.

Complete protection. The "dialogue" encryption code is used both in the main and in the additional key fob.

Benefits for installers:

The algorithm for programming functions has been modernized. Now online on the key fob display you can see the function number and its programmed value.
The management of additional channels has been modernized, which made it possible to install the StarLine A92 Dialog system on all modern cars.
StarLine A92 Dialog models can be easily transformed into a security and search complex by adding one of the StarLine GSM / GPS modules, which will connect to the alarm system via a local network using a single 3-pin connector.

More than 50 standard and programmable functions provide the car owner with not only reliable protection, but also comfort when using a car alarm StarLine A92 Dialog.

Categories

Popular