What can be done from the details of the washing machine. Homemade from an engine from an old washing machine. Floor lamp and hanging chandelier

Today it is very difficult to imagine a modern house without a washing machine. This equipment becomes an indispensable assistant to any housewife. In addition to clean clothes, this device saves a lot of time and preserves the beauty of hands. But, unfortunately, there is nothing eternal, and over time, the washing machine fails and needs to be replaced. Craftsmen are in no hurry to throw out the old typewriter, because, if desired, and some knowledge, this device can be quite practical application. The second life of a washing machine can begin in a completely new way. This device has a lot of valuable, useful components and assemblies, thanks to which you can build things that are useful in the household.

The most used element of the washing machine is its door. Many craftsmen use it in place of a small window, which is installed in small rooms at their summer cottage.

To get good and useful homemade products, you can disassemble and use:

  • Frame;
  • Manual control (elements);
  • Engine;
  • sealed door;
  • Pulleys;
  • Drum;
  • Pump;
  • Relays and switches.

The originality lies in the fact that the door is very reminiscent of a ship porthole. You can also decorate a dog house with a door from a typewriter. In addition to the original design, the door will have a practical purpose. If necessary, the dog can be isolated from guests. From the washing drum you can build a nice coffee table. To do this, you need to take a few rods, they must be fixed to the drum. From above, with the help of special fasteners, a glass tabletop is installed.

Inside the drum, you can install LED lighting.

Such an original piece of furniture will be a wonderful high-tech decoration that can decorate a balcony, veranda or attic. If you connect fantasy from an old typewriter, you can make interesting and original decor elements that will become the highlight of a summer cottage interior.

What can be done from a do-it-yourself washing machine

With your own hands from a machine, you can build such a useful device as a juicer. This device will become indispensable in the season of appearance of fresh fruits and vegetables. Making a juicer is possible in 2 ways. The first option is to use a centrifuge with a laundry compartment. This option allows you to create several processes at once in one device with minor modifications. Namely, the process of grinding and pressing.

For the manufacture of:

  1. A washing machine is suitable, where the activator is located at the bottom.
  2. For cutting, it is replaced by 3 homemade knives that can be made from strip steel.
  3. The drain hole of the tank must be plugged.
  4. A mesh made of stainless material is installed in the centrifuge so that the side surface is closed.

Before use, the structure must be washed with baking soda. The second option is made from a barrel machine. To do this, you need to install a homemade centrifuge.

It is very important to achieve alignment during installation, then the device will work better.

To do this, the engine is suspended on 6 springs, 3 of which are balanced, and the rest are pressed up. To dampen strong vibration, the body of the structure can be installed on a car tire.

Making a do-it-yourself removable machine from a washing machine

For people who keep a lot of poultry, a machine that removes feathers easily and quickly may be needed. The pen-removing machine is also made from a typewriter.

For the manufacture of:

  1. A steel disc with a smaller diameter than the tank and a thickness of 3 mm is installed at the bottom of the tank.
  2. Holes are drilled in it into which rubber fingers are placed. On average, you need to install 13-140 pieces.
  3. All other technical nodes can not be changed.
  4. In the side walls up 15 cm from the bottom of the tank, beaters are installed in the same way.
  5. The lower disk must be installed on the drive shaft.

There is no need to plug the hole, as it is useful for draining water. Before using this device, poultry must be scalded well with boiling water and placed in a tank.

After turning on the engine, the installed rubber fingers quickly remove the chainstays.

The process is quite efficient, the carcasses after processing are clean. The most expensive part of this design is rubber fingers, which must be selected according to the type of pen.

How and what can be done from a motor from a typewriter

An old washing machine with a serviceable electric motor can be used to make a generator. With the help of a motor, you can build a device that will help organize lighting in pantries or utility rooms.

For this:

  1. It is necessary to disassemble the engine to remove the core, from which it is necessary to remove a layer on a lathe, 2 mm deep.
  2. After that, it is necessary to cut grooves in the core with a depth of 5 mm.
  3. Neodymium magnets are inserted into the grooves at the same distance from each other.

To fill the gaps of the magnets, cold welding is used. At the end of the manufacturing process, the surface of the rotor must be sanded. Next, you can proceed to complete assembly devices.

Assembling a brazier from a drum of a washing machine

Homemade brazier from the drum of a washing machine can be used in the yard of a private house, in the country or an outing picnic. Production is possible due to the fact that the drum body is made of durable stainless material, which has high properties to withstand high temperatures. Making a brazier from a drum is quite easy and simple, just arm yourself with a welding machine and set aside a little time.

To start:

  1. It is necessary to make the supporting part of the future brazier, it is best that this part can be removed, this will allow you to move the brazier to any convenient place.
  2. For the manufacture of the support, only non-combustible and durable material can be used.
  3. The height of the legs under the barbecue is done at your discretion, as long as it is convenient.

Many craftsmen use old metal coasters for flowers. For the manufacture of this device, drums from front-end machines are suitable. If the machine is top-loading, you will have to cut off one of the sides with a grinder.

In addition to the barbecue, a home-made round smokehouse will become convenient and useful.

A mobile smokehouse is made from a drum that is removed from a top-loading machine. All side openings of the drum must be closed with a steel sheet. This is necessary so that the smoke does not scatter in different directions. From above it is necessary to mount a chimney. This can be done after cutting a hole of the desired diameter. A grate must be fixed inside the drum. The grate can be welded with your own hands or taken from the stove. The use of such a smokehouse is always possible. Such devices for cooking delicious meat and fish will be just a godsend for people who like to save money without sacrificing their comfort.

A method of manufacturing a lathe from an engine from a washing machine

The motor can be used to make a small woodworking tool. The lathe is made from a corner that serves as a frame, shaped pipes and other improvised materials. The electric motor can be taken from any old typewriter. Even the engine from the washing machine is suitable for a baby. You can adapt the engine to the frame in any convenient way. The most important thing is that the axis is set in parallel supporting structure. The headstock is attached to the motor pulley. The tailstock is made from improvised materials and installed parallel to the frame. The main part of the machine is the handpiece. This part acts as a support for the cutting part. It is necessary to ensure its movement along and across the frame. Also, do not forget about reliable fixation during the operation of the machine.

Summing up, we can safely say that with certain knowledge and the work of fantasy, old things can become very necessary and useful in the household. Reworking old things allows you to save money and create original and interesting devices such as a stove, barbecue, electric generator, lathe and grinder. Crafts can revive and decorate the interior of not only the yard, but also at home. The washing machine has many parts and elements that can be used to make many interesting and useful units. The use of an electric motor from a typewriter allows you to build kitchen appliances such as a juicer and a sterilizer for preservation. In order to design all useful devices, it is necessary to carefully develop a drawing, prepare necessary details and tools. When everything you need is at hand, you can start assembling.

Homemade from the engine from the washing machine (video)

Do not throw away old electrical appliances, because in capable hands, old things can turn into the most useful and irreplaceable devices.

If your old washing machine is broken, do not rush to throw it away. Even with a burnt out engine, some of its parts may come in handy. Believe me Many useful things can be assembled from individual parts of the apparatus: smokehouse, barbecue, concrete mixer, grinder, juicer, small table, sterilizer, Summer shower, washstand, water tank, trolley and even a flower vase. Let's take a look at the practice of what can be done from an old washing machine.

Brazier from a drum

Brazier is an extremely demanded thing for our person. But finding a quality product or raw materials for its manufacture is quite difficult. This is where non-standard methods, ingenuity and an old automatic machine will come to the rescue.

The material of the drum will calmly withstand high temperatures, so it can serve as a brazier for many years.

For the future barbecue, you will need to remove the drum from the apparatus. It is made of stainless steel, so it does not care about rain and snow.. The upper part, one might say, is already ready, it remains only to attach legs to it. As a support, you can use pipes of small diameter, fittings, rods or corners. Pipes and corners are bolted immediately, but the fittings will have to be welded first. It is very easy to do this: mark the marked location of the legs on the drum, cut the material to the desired length, then drill holes in the drum and legs, then bolt the parts.

Do not use too thin corners, plates and pipes. The minimum thickness of the metal should be 2 mm. Otherwise, such a design will quickly burn out or bend from high temperature.

Be sure to use a minimum of 2 bolts per leg to connect the legs to the drum. Bolts 6 mm in diameter are enough for these purposes. Mangal is ready. Now, if desired, it can be disassembled and assembled (by unscrewing the legs from the drum). The product does not take up much space long years, but it costs mere pennies.

homemade grill

Making a grill is similar to making a barbecue, but in addition you will have to buy a small motor and make a slot in the tank. So, take the tank and cut a segment from the bottom of it a quarter or a little less. Then make a hole in the side cover (where the mounting bearing is located) and place the motor there. To prepare meals for you it is necessary to put the chicken on a spit, and set the tank on the coals then turn on the motor.

If you need a smokehouse, then you do not need to buy an expensive model for this, make it yourself from the drum of an automatic machine, and even better from a Soviet washer.

From the drum of a modern automatic machine, you can design a mobile oil lamp. To do this, you need to plug all the holes around the circumference. For example, a thin steel sheet is suitable for these purposes. Fix it on the drum with bolts or weld it to the body. Also equip the door (it’s easier if you use a drum from a top-loading machine, there is already such a door there). From above it is necessary to make a hole for the exit of smoke, and inside place a grate on which products will be smoked.

Some craftsmen made the original smokehouse from old Soviet washing machines. An electric burner is mounted on the bottom of the apparatus, on which a frying pan with aspen chips is placed. A mesh is installed at the top of the tank and products are placed on it. From above the structure is closed with a lid.

Grinder from the washing machine engine

If you still have a washing machine engine in working order, do not rush to get rid of it. It will find application as a grinding machine. Moreover, to create such a device, you will need a minimum of costs.

The electric motor in the automatic machine is quite powerful, so it is more than enough for a grinder or a small sawmill.

First, make a nozzle on the shaft to fix the grinding wheel there (such a “neck” will also be useful if the machine is used to cut plastic or metal pipes, fittings, sheets, corners). As a sole, a regular large-section board is used. To attach the engine to it, pick up metal brackets. You can fix them with screws. The power cord can be taken from the same machine.

The advantage of this design is mobility. The machine can be moved to any place. It can be used both in the garage and on the street. And by changing the nozzles, you can not only grind, polish, but also saw or cut any materials.


To create a concrete mixer, only an old Soviet washing machine, like the Donbass model, is suitable for you, machines, unfortunately, are not suitable. The manufacturing process itself is quite complex, time-consuming and will require you to have some locksmith skills and engineering knowledge.

The easiest way is to make a concrete mixer in which concrete will be mixed using a propeller. So, you need to replace the activator with a fan assembled from two U-shaped plates. For blades it is better to use thick metal strips(about 4-5 mm thick).

To make the blades, first cut 2 identical strips. Choose the dimensions so that the propeller fits and can spin freely in the tank of the future concrete mixer. Bend the plates so they are facing each other at a 90 degree angle.

The finished "mixer" for concrete must be mounted on the shaft from the activator. Here you need a welding machine. If the standard shaft is not enough, you will have to build it up with a thick metal rod.

In older machines, there is a drain hole at the bottom of the tank. To prevent concrete from flowing through it, plug the hole.

The next step is choosing an engine. For small volumes, you can not change it, the regular one is enough. But if you mix more than 15 liters of concrete, then it is better to install a more powerful kilowatt engine.

When buying an electric motor, choose one with less RPM. Even 1000 revolutions for a concrete mixer is a lot. Therefore, you will have to additionally install a reduction gear. Calculate the gearbox parameters so that the propeller revolutions are about 25-30 per minute. You are unlikely to be able to make a gearbox yourself without a machine. Therefore, it is better to order it at some factory. In extreme cases, you can use "asterisks" and a chain from a bicycle.

It is more efficient to mix concrete with a concrete mixer in which the drum itself rotates. But making it at home is extremely difficult.

Juicer

It is better to make such an apparatus from an old Soviet typewriter with a centrifuge, where the activator is located below. It is very difficult to make a juicer from an automatic washing machine drum. So, take the old technique, take out the activator. Instead, you need to make knives that will rotate on the shaft of the washing machine.

Knives are made of strip steel. Cut three even rectangular strips of the same size. Make a hole in the center of each of them to put them on the shaft. Each of the knives must be sharpened.

After making the knives, thread the shaft, take a few nuts and washers. Alternately install the knives on the shaft, securing them with nuts. Install two washers in front of the first blade and two nuts after the last blade. When the knives are mounted, plug the drain hole. The first part of the juicer is ready.
In the centrifuge, you only need to install a mesh of thin wire (0.2 mm thick and one cell size 1.5x1.5 mm). The mesh should cover the side of the centrifuge.

Before using the product, it is highly recommended to thoroughly wash the tub of the washing machine and the knives.

Using this juicer is pretty easy. Turn on the engine, fall asleep a portion of pure fruit. Give the blades time to grind some of the food (15-20 minutes is enough). Then turn off the engine and place the crushed particles in a centrifuge, which will squeeze the juice from the chopped mass.


Some parts of the old typewriter are used as parts for furniture. So, you can make an unusual table from a drum. To make it, you will need steel rods and a round or square tabletop made of glass or wood. It all depends on your ideas about the future table model. The rods need to be fixed in the drum, and threaded on top of them, and then install the countertop.

If a glass top is used, then make the backlight from LEDs. A table with it will look much more spectacular.

Also using the tank, you can build an ottoman. A pillow needs to be fixed on top. Paint the drum itself in any color.

Another original solution is a floor lamp. You will need a drum and a tripod. Paint the drum in a bright color or cover with a fabric. Then install the socket with the light bulb inside and fix it on the tripod. You will not find such a floor lamp anywhere else.

Another way out is to make a hanging chandelier from a washer drum. Inside, you just need to fix the cartridges with light bulbs and bring out the wires. External design - according to your preference.

Making a picking machine

Such a device will be useful to those who live in their home and keep chickens. First, make a steel disc that will be installed at the bottom of the tank of the machine. The thickness should be within 3 mm, and the diameter should be slightly smaller than the diameter of the tank. You need to drill holes in the disk and insert rubber pins.

Pins or "fingers" will have to buy. They are quite expensive - about $ 2 for one. Such elements need 130 pieces.

After acquiring the fingers, secure them to the disc. Now you need to make holes for the hammer fingers in the side walls of the tank. Step back about 15 cm from the bottom of the tank and drill holes in a circle. The interval between the holes should be 3-4 cm. After that, mount the disc on the shaft - the picking machine is ready.

Finally

The above methods are only a small fraction of the tips for the non-standard use of spare parts from an old washing machine. Experiment and create your own inventions. A washstand will come out of the tank of the Soviet washing machine without any problems, a window or a door to a doghouse will turn out from the front panel of the machine, an original cabinet for accessories will come out of the case, a flower pot will come out of the drum.

What is usually done with obsolete household appliances? There can be many options here. Someone simply takes the old unit to the nearest dumpster, someone - to the country house or garage, in the hope that "maybe it will come in handy." You can also contact a company specializing in the export of large-sized equipment - there are hundreds of such organizations in any major city.

However, there is another way to solve the problem, which for some reason is forgotten by many. Old, unrepairable household appliances you can give new life. Craftsmen make original and functional things out of non-working refrigerators, electric stoves and washing machines. In this article we will tell you what crafts you can make from an old washing machine. Do not rush to get rid of the failed assistant, let her benefit you in her new incarnation.



What parts can be used?

A washing machine is a complex appliance, consisting of a huge number of elements, most of which can be used in a useful way. Almost any spare part can be put into action, starting with a sealed housing and ending with a drum. Most often, the following spare parts are used for crafts:

  • engine (motor) - if it is serviceable, it can form the basis of a new device;
  • drum - high-quality metal is always useful in the household;
  • hatch door - shock-resistant glass is also a useful thing in everyday life;
  • body - this part can come up with some interesting application;
  • various small parts: springs, counterweights, clamps, bearings, electrical wires - all this will fit for various household needs, especially in skillful hands.


Concrete mixer

From an old cylindrical washing machine, which is popularly called a "barrel", you can make a compact concrete mixer and use it for domestic needs. The device is quite complex, therefore, in order to make it, you need to have at least elementary knowledge in electrical engineering and plumbing.

First you need to remove the activator from the washing machine. Instead, we will install blades that will mix the concrete. The blades need to be cut and welded from a metal sheet (best if it becomes). The blades should be U-shaped and about 0.4-0.5 cm thick; a right angle should be observed between them.

Next, we weld the blades to the shaft to the place where the activator used to be. After that, we need to decide whether we will keep the old engine or make a new one. If you plan to knead small portions of the solution, then the engine does not need to be changed. If the portion volume is large enough, it is more advisable to install a more powerful engine. Also, do not forget to put a gearbox instead of a belt drive, which will reduce speed and increase torque.


Juicer

Another useful household appliance into which you can convert a washing machine is a juicer. True, it will turn out to be very large and take up a lot of space. Only older models of semi-automatic type washing machines with an activator motor are suitable for conversion into a juicer.

The principle of operation will be the same as in the previous case: we take out the activator and put in its place self-made knives that will chop fruits and vegetables. Knives must be sharp, so do not forget to sharpen them before installation.

Next, you need to work on the shaft: we thread it, put on the knives, fix them with suitable fasteners. After that, we seal the drain and put a metal mesh with small cells inside the centrifuge. First, the raw materials will be ground in a tank, and then squeezed out in a centrifuge.



Preservation sterilizer

An indispensable thing in the country is a jar sterilizer. You will be surprised, but it can also be made from a washing machine. The process of making jams and pickles will become faster, because in such a unit you can sterilize several jars at once.

So, to make a sterilizer from an unnecessary washer, you need:

  • put a plug in the opening of the activator;
  • install a support on the bottom;
  • put a metal mesh for jars on a support;
  • drill a hole in the tank for the boiler;
  • connect the boiler to 2 kV.

Grinder

If the washing machine engine is in good condition, you can make a sharpener for knives and garden tools out of it. In addition to the engine itself, we need a grinding wheel. In addition, prepare the base for the machine - a thick wooden block is perfect for this purpose.

An adapter must be placed on the shaft, on which the grinding and cutting wheels will be installed. The machine will be attached to the base by means of two pairs of metal brackets. The switch for the appliance can be borrowed from the same washing machine.

If you plan to use the machine for cutting, you can also install a cutting wheel on it.



Pen removal machine

A feathering machine is a device that allows you to quickly pluck poultry carcasses. If you breed chickens, ducks, turkeys or other birds, such a device will be very useful to you. True, to make it yourself, you have to spend money. Basic equipment: rubber pen fingers are quite expensive. In addition, for each type of bird, “fingers” of different diameters are needed, since the size of the feather in different breeds can vary significantly.

Operating procedure:

  • we make a disk of steel (thickness - 0.3 cm, diameter - minus 1 cm from the diameter of the tank);
  • we drill holes in the disk for the “fingers” (the distance between them should be approximately 3 cm);
  • we drill the same holes on the sides of the tank, stepping back from the bottom 15 cm;
  • install the disk with the “fingers” threaded into it on the shaft;
  • we put the pen fingers into the holes drilled in the tank.


See the following video for how the pen-removing machine works.

Ideas for giving

Where do you usually take your unwanted items? Of course, to the cottage. Surely most of us have an old washing machine gathering dust in the attic or in the shed. Instead of cluttering up their place, the unit can be adapted for some household needs and made, for example, a washbasin.


Let's consider other options.

Brazier

It is not known who first thought of making a brazier out of the washing machine drum, but this idea was quickly picked up by many summer residents. The idea is really successful - the brazier turns out to be durable, convenient and compact. For the production of drums, high-quality metal is used, which is well tolerated by moisture, temperature changes and is not subject to corrosion.

The drum must be removed from the tank and installed on the legs. For these purposes it is possible to adapt metal bars or thin, durable pipes - some of this is sure to be found at their summer cottage. A suitable piece of metal must be cut into equal parts, and then carefully welded to the bottom of the drum.



Brazier, which can be made from an old washing machine, you can see in the next video.

Grill

To cook meat deliciously in nature, you can use not only the grill, but also the grill. It can also be made from a washing machine (namely, from its tank), but for this you will have to purchase a motor that is suitable in size and power.

From the bottom of the tank you need to cut a small piece - its dimensions should be ¼ or slightly less than the entire size of the tank. Then, in the side part - where the drum bearing was - drill a hole into which you then install the motor. The grill will be heated by coals, and the spit will rotate using the engine.


Smokehouse

We must not forget about another incredibly tasty way of cooking meat and fish - hot smoking. A device that allows you to smoke in a summer cottage can also be made from spare parts of an unnecessary washing machine.

The drum will become the basis of our smokehouse. First, you need to plug all the holes in it. You can brew them, but it will be faster to wrap the drum with a thin metal sheet. You need to cut a door in the drum (if a top-loading washer is used, then the door is already in the right place).

We cut or drill a hole in the upper part of the tank through which smoke will escape. For meat, we install a metal grate inside the tank.

Furniture from spare parts

Those who do not need homemade equipment and utensils for cooking can be advised to use parts of a disassembled washing machine to make original furniture or storage spaces. The body and drum are best suited for the implementation of design ideas. Read on to find out how you can freshen up your interior with an old washing machine.

Coffee table

From the drum of an old washing machine, you can make an unusual high-tech coffee table. Due to the peculiarities of the source material, it will turn out to be very durable, but light, and will serve you for many years.

We take the drum from the automatic washing machine as the basis of the table; to make the product look more impressive, we will give it shine with a special cleaning agent. As a countertop, take a piece of tempered glass that is suitable in diameter. We fix it on the drum using long fasteners. The table is ready!



Looking at an old washing machine, any housewife dreams of replacing it with a new assistant as soon as possible. A home craftsman, on the contrary, is not in a hurry to throw the machine into the scrap. He reflects on where this "wealth" can be adapted.

Answering the question of what can be done from a washing machine, we will carefully consider it from all sides.

We will see that the design contains many useful components and assemblies that can get a new life in the hands of a good craftsman.

Judge for yourself: the body and motor, pulleys and drum, a window with a sealed door, relays and switches - this is a list of components from which you can make a lot of things and mechanisms that are useful in the household.

Let's study together the most popular homemade options from old washing machines, both conventional and automatic.

Grinder

The first thing you should pay attention to after inspecting a home washing machine that has served its age is the engine. He has enough power and revolutions to make a homemade sharpener. Complex modifications are not required here.

For the shaft, you need to make an adapter nozzle on which the grinding wheel will be attached. If we provide an additional “neck” for the cutting wheel at the seat, then together with the sharpener we will get a cutting machine. They can cut not only plastic pipes, but also metal (rebar, sheet or corner).

As you can see in the photo, the washing machine motor is attached to the frame with four brackets. The switch for it is removed from the same washer. As a base, an ordinary piece of thick board was used. The option turned out to be quite acceptable, especially considering its mobility and ease of manufacture (no welding required).

Here is another similar use of the engine to install a grinding and cutting wheel. Having put on a common adapter, they are clamped with a nut with a left-hand thread.

Simple crafts from an old washing machine

Not every person knows how to masterfully work with welding or a lathe. However, even in this case, for the old washer you will be able to find worthy use. Look at the window that closes the drum. This is a masterpiece of engineering art and a godsend for design.

Without further ado, many use it for its intended purpose, but in an updated context. Cut out the washer door along with a part of the body and you will get a great "sea" porthole. It will look original in any interior.

If you love your yard guard, then be sure to decorate his booth with such a modern “facade”.

In addition to the original look, this version has practical value: the dog, if necessary, can be easily isolated from guests without fear for their legs and clothes.

Just don't forget to do the side in the booth ventilation holes(the window at the washing machine is sealed!).

Washer coffee table

Your old washing machine, or rather its drum, will help decorate the interior of the apartment. From it you can build an original coffee table. Perforated stainless steel, complemented by colored lighting, looks great.

It is not difficult to make such an unusual piece of high-tech furniture. You will need several steel rods that need to be attached to the washer drum. A round tabletop made of glass or MDF board is fixed on them.

Brazier

The body of the washing drum, made of durable and high-quality "stainless steel", can withstand very high temperatures. Therefore, it can be used as a barbecue.

A few pipes, half an hour of welding work and a convenient barbecue grill will appear on your estate. Having made the supporting part of the structure collapsible, you can take it with you on country picnics.

For the manufacture of brazier, drums from front-end machines, as well as from top-loading washers, are suitable. In this case, you will have to cut off one of the sides of the case with a grinder, and provide it with a stable support from below.

Mobile smokehouse

Why buy an expensive smoker for fish and meat when an old washer is idle on the farm? There are many options for its use in this capacity.

We will focus only on the mobile device. It can be made from a drum dismantled from a top-loading washing machine.

To prevent smoke from escaping through the side perforated holes, they must be plugged with a thin steel sheet, wrapped and secured around the body. From above, as it should be in a real smokehouse, we make a hole for the chimney. Inside the drum we fix a smoke grate (you can take it from an old gas stove).

Concrete mixer

This is a rather complicated device, which, in addition to mixing concrete, must ensure its unloading. Therefore, if you are going to make a concrete mixer out of an old washing machine, first weigh your locksmith skills and knowledge.

The easiest way to turn a drum washer into a concrete mixing device is to replace the standard activator with overhead-shaped blades. They can be made from 4-5 mm thick steel strip. To do this, it must be cut to size, then bend two blades and rotate relative to each other by 90 degrees.

After that, they need to be welded to the shaft, passed through the hole for the remote activator.

The drain hole, which is in every barrel washer, must be plugged. Next, we proceed depending on how much concrete will need to be kneaded. If we are talking about 1 bucket, then you can leave the old single-phase motor.

If you need to prepare a large amount of concrete, then in place of the old motor you will have to install a more powerful one (0.75-1.2 kW) with low speeds (1300-1500 per minute).

In addition, the "native" belt drive must be replaced by a gearbox that reduces the speed (from 1300 to 25-30) and increases the torque on the agitator blades.

Note that the best mixing quality is obtained when not the shaft with the activator rotates, but the body of the concrete mixer itself with the blades fixed in it. However, to create such a design, a deeper and more complex refinement of the washer is required.

Preservation sterilizer

For giving and subsidiary farming, another homemade product from an old barrel washing machine will be useful. This is a sterilizer that can hold a dozen heat treatment jars.

The only point to consider: such a device is suitable for sterilizing fruits and vegetables. For processing meat, a higher temperature is needed (above + 100C).

The conversion sequence looks like this:

  • A plug is placed on the opening of the activator;
  • A thick wire mesh for cans is mounted on the bottom;
  • Under the grid you need to substitute a support;
  • A hole is drilled in the case for the installation of an electric boiler with a power of 2 kW.

1. Plug activator;
2. Water level;
3. Tank from the washing machine;
4. Lid;
5. Drain hose;
6. Banks with conservation;
7. Wire mesh;
8. Electric boiler (heater) for 2 kW;
9. Electrical cable.

Juicer

There are two options here:

  • Using an old machine with a centrifuge and a laundry compartment;
  • Alteration of a conventional washing machine-barrel.

Let's say right away that the first option is better, since it allows you to implement two processes in one device with minimal modifications: grinding fruits and squeezing them. This will require a washing machine, in which the activator is located at the bottom, and not on the side wall. Replacing it with three homemade strip steel knives, we get a fruit cutter.

Knife installation scheme:
1. Knife,
2. Shaft;
3. Clamping nut;
4. Washer;
5. Tank bottom;
6. Bearing unit with stuffing box;
7. Activator pulley;
8. Locking screw.

The drain hole of the washing tank must be plugged.

There are few additional processing for the second unit - a centrifuge. It is necessary to install a stainless steel mesh (mesh size 1.5 mm, wire thickness 0.2 mm) in it so that it covers the side surface of the centrifuge.

After thoroughly washing the centrifuge, washing tank, hoses and pump with baking soda, you can make the first bookmark.

The principle of operation of such a juicer is very simple. Fruits are washed and in small portions (1/2 -1 bucket) are loaded into the washing tank (knives must be included). After 15-20 minutes of cutting, the engine is turned off and the crushed mass is transferred to a centrifuge (in portions of 3-4 liters). Turning on the centrifuge, squeeze the juice.

It is much more difficult to make a juicer from a barrel washing machine or a machine. In a barrel, a homemade centrifuge can become a “stumbling block”. To make it is half the battle, the main thing is to achieve perfectly accurate alignment. Without this, at high speeds, it begins to vibrate strongly and it will be impossible to squeeze the juice.

Here is a drawing of a working sample. The master had to work hard to reduce the beating of the centrifuge (the engine is suspended from the washing machine body on 6 springs). Of these, 3 balance the engine in a horizontal plane, and 3 others push it up. The case itself stands on an old car tire, which dampens vibration.

Pen removal machine

The body of an old washing machine is suitable for assembling a device with which you can remove feathers from bird carcasses. To make it, at the bottom of the tank, you need to install a steel disk 3 mm thick and with a diameter slightly smaller than the diameter of the tank.

Holes are drilled in it and special rubber fingers are placed in them. They are the most expensive items. future design(1.5-2 dollars apiece). On average, they need 120-140 pieces. The diameter of the fingers depends on the type of bird being plucked. Please keep this in mind when placing an order.

All other components of the washer, including the engine, can not be changed. Holes are drilled in the side walls of the case for the installation of pen-removable (beating) fingers. To do this, from the bottom of the tank you need to step back up by 15 cm.

The distance between the holes for the fingers is chosen within 3-4 cm. The lower disk is mounted on the drive shaft.

The drain hole does not need to be plugged here. It will be needed to drain the water that drains from the carcasses. After scalding the bird in boiling water, it is placed in a tank and the engine is turned on. Rubber fingers quickly and cleanly remove the pen.

The washing machine, like other household electrical appliances, after a certain period of operation fails and is no longer subject to repair. Therefore, you have to buy a new one, but what to do with the old machine? Of course, you can simply throw it away for recycling, like MSW. But this is what impractical owners do, since the design of this household equipment includes many useful elements that can still be useful in the household. Consider what can be done from a washing machine.

What parts can be used

A washing machine is a rather complex household equipment that includes many individual elements. The more modern it is, the more details are included in its design.

Washing machine elements that can still be useful in everyday life:

Important! If you understand electronics, then you should not throw away the control unit, which includes a large number of semiconductor components that can be useful when repairing other electrical equipment.

Application of the working motor of the washing machine

Consider some homemade products from the engine from the washing machine. Today, with the help of the Internet, many home craftsmen are happy to share their own inventions, the design of which used parts from old washing machines. Let's take a look at the most popular ones.

Making a concrete mixer

When carrying out repairs in an apartment, a private house, you may need a small amount concrete mortar. Renting a concrete mixer for such a purpose is too expensive. You can build such a tool yourself, for which the case from the old washer is suitable (except for the machine).

Manufacturing instructions:

A simple concrete mixer for domestic use is ready. With the help of such a device, you can easily prepare a bucket of solution.

Emery from the engine from the washing machine

A working motor from an old automatic machine can be used to make electric emery with your own hands. This is done very simply - an emery stone (grindstone) is installed on the motor shaft. Such a tool will be very practical in the country, since it can be used to sharpen not only knives, but also shovels, axes.

Feed cutter, grain crusher

Those who have a small plot of land, maintain a household, do not interfere with a grain crusher made by their own hands, a feed cutter. If for this purpose an electric motor of an automatic machine is used, then makeshift fixture will work just as well as factory equipment.

It is not difficult to make a feed cutter at home. In addition to the motor, you will need a top-loading car body, which can be found at scrap metal.

It's important to understand! The engine of a failed washing machine can be used to make many different household tools that require rotation.

The working motor of the washing machine can be used to make a homemade dough mixer.

How to connect the motor from the washing machine

If the owners of the old machine have ideas for the further use of a working engine, the question immediately arises of how to connect it to a 220 V power supply.

To begin with, it is worthwhile to deal with the electrical circuit, after which connecting the engine to the power supply does not take much time. Need to figure out the wiring. Specifically, wires connected to the stator, rotor will be used.

How to choose the right wires

Look at the wiring block from the front - the first two wires on the left are most often tachometer wires, through which the speed of the washer motor is adjusted. We won't need them.

Then comes the red brown wire stator, and behind them are two wires (green, gray) connected to the rotor brushes. We will need all these wires to connect the engine to the mains.

Important! To connect a washing machine motor to a 220 V power supply, a starting capacitor is not needed, and the motor itself does not need a starting winding.

Of course, in different models of washing machines, the wires differ in color, but the connection principle itself is similar. To deal with the wiring, you need to ring each wire with a multimeter. The device must be set to measure resistance. Then one probe of the device is applied to any wire, a pair is selected for it with the second probe.

Quietly functioning tachogenerator most often has a resistance of the order of 70 ohms. These wires are recognized first of all, removed to the side. After that, the remaining wires are called, divided into pairs.

We connect the engine to the network

When everything is clear with the wires, you need to connect them correctly:

  • In accordance with the diagram, the end of the stator winding must be connected to the rotor brushes (it is recommended to make an insulated jumper).
  • It is necessary to connect the wire of the rotor brush, the end of the rotor winding, to the mains. After applying voltage to the wires, the motor will begin to turn the shaft.

Important! Washing machine motors are very powerful. To avoid injury, you must be extremely careful. Therefore, before starting the equipment, it is recommended that the motor be carefully fixed to some kind of base.

Application of the washing machine drum

The washing machine drum, made of durable stainless steel, can be used for a variety of purposes in the household. From it you can make a lot of practical products with your own hands, for example, a barbecue grill or a barbecue grill.

How to make a roaster:

  • it is necessary to disconnect the drum from the old washer along with the shaft and pulley;
  • install it up the hatch on the wheel;
  • the brazier is ready.

The working part of the brazier can be slightly increased. To do this, you need a grinder, with which the front of the drum, located near the hatch, is cut off. Accordingly, it will be much more convenient to put firewood into it.

Note! For the manufacture of barbecue drum - perfect material, as it has a huge number of holes through which the air flow will evenly inflate the coals, creating the necessary heat.

You should not throw away a used washing machine, as it consists of many useful parts that can still be useful in everyday life, in the country, for housekeeping. At the same time, various devices made by yourself will help save money.

Fitting © 2022 Design and interior of apartments