Bed with lifting mechanism: pros, cons, assembly. A complete overview of double beds with a lifting mechanism, design nuances

A special place in the house is the bedroom. It is here that you can relax after a very hard day, lie down or sit quietly. The main subject of the bedroom, of course, is the bed. It should be comfortable and made of quality material. There is a huge selection of beds on the market today. different sizes and forms. Beds equipped with lifting mechanism. Most often, these beds are purchased by owners small apartments.

Any bed consists of a base, as well as a frame. The latter can be of two types: with two side panels and two supporting backs, or with four panels and hinged backs (one or two). Beds made according to the second type are equipped with four more legs or wheels. According to experts, it does not matter whether the bed rests on the backs or on the legs. The main thing is that the bed is of high quality, then it will last a long time. But still, we note that legs break more often in beds than backs. The most reliable frames are made of metal and wood. Now forged beds are considered fashionable. Those who like to soak up the bed will find Interia soft beds with beautiful headboards. But beds in which the frame is made of MDF, fiberboard and chipboard are not so reliable and can crack, creak and loosen (photo 1).

The quality of sleep depends on whether the bed is comfortable. main role the mattress plays here. There are models of beds that are completed immediately with a mattress, and there are models without it. The support for the mattress is the base. It is a lattice or frame that is attached to the bed frame. The base is made of wood, metal and chipboard. Armor is placed on the frame - lamellas made of plastic or wood. Experts say that the bed will be of high quality if there are at least thirty slats in a double bed, and fifteen in a single bed (photo 2).

The base can be raised thanks to the gas-lift mechanism. Under the base is a box. You can put pillows, blankets and other bedding in it. Beds equipped with such a lifting mechanism are convenient in small rooms. They perform two functions at once: they are a bed and a chest of drawers at the same time. Thus, it will not be necessary to clutter up the apartment extra furniture. It is worth noting that lifting mechanisms are divided into three categories: on coil springs, on gas shock absorbers and on hinges without springs (with manual lifting). Inexpensive are beds in which the lifting device is equipped with twisted springs. But raising such a bed is more difficult because of the metal spring. The mechanism on gas shock-absorbers is convenient in operation. The base rises smoothly and easily. The simplest mechanism is manual on hinges. But, conversely, when lifting, efforts are needed. If the room is too small, then you can buy a wardrobe bed or folding bed(photo 3).

Experts recommend staying on beds equipped with drawers, as well as a lifting mechanism when the apartment is very small and there is nowhere to store things. And if there is no acute shortage, then it is better to use a traditional, time-tested bed. Especially today, manufacturers make very beautiful, comfortable and soft beds with and without backs. By the way, it is better, of course, to take a bed with a back, as it will be more comfortable to sleep on it. It will provide a comfortable position for the head (photo 4).

Pay attention to the fact that when assembling the beds are used different materials. A person may be allergic to them. Therefore, it is better for allergy sufferers to take beds with mattresses stuffed with foam rubber or synthetic fiber. Also, allergens are not collected in beds with a slatted bottom (photo 5).

Choosing a comfortable bed is important point furnishing any bedroom. When deciding how to choose a bed, you need to decide on the size, shape, design and quality of the material. The model should harmoniously fit the interior of the apartment, be combined in color and style, become decorative ornament apartments.

How to choose the right bed?

The reliability of sleeping furniture depends on performance characteristics frame, the comfort of rest is related to the quality of the mattress and base. To decide which bed to choose, you first need to decide on the design, then evaluate the reliability of the design. Sturdy frames made of solid wood, metal. A stronger base is the option with lamellas attached to the frame. Modern models are equipped with additional shelves and drawers, there are two-tier, transformable structures combined with other pieces of furniture.

How to choose an orthopedic bed?

Previously, the basis for the bed was a hard bottom made of plywood or metal grid. Orthopedic frames in modern models are a wooden or steel frame on which bent elastic strips are fixed with a bulge upwards. These slats act as springs that gently flex under the weight of the body and provide ventilation to the mattress.

When choosing an option, you need to consider some characteristics:

distance between lamellas. The more rails in the grid, the better the base in terms of orthopedic comfort. For reliability, it is better to purchase a base with frequently spaced slats;
wood for rails. The best birch or beech lamellas;
rail width. Large beds in the bedroom are equipped with jumpers that reduce the deflection of the slats;
appearance models. The frame can be installed both on a solid base and on legs.

Bedroom with a round bed

The non-standard shape of the bed is a challenge to the stereotype of interiors. bedroom design with round bed looks beautiful and extraordinary, the furniture becomes an accent item in the room. On such a bed, there is more space for sleeping than on a regular one; you can place it in any direction. Based on materials round products available in metal, wood or leather.

Models with graceful curved backs look like royalty. The design of furniture can be installed on legs or made in one piece pouffe. The mattress for the bed is found round or rectangular, located in the middle. Models meet the most different colors, plain or patterned. A snow-white bed with a quilted back looks especially festive.

How to choose a sofa bed?

Functional furniture that takes up little space is relevant for small spaces. The sofa bed in the bedroom is ideal solution if the room is small or narrow. It easily transforms into a place to sleep and back, saves the area of the apartments during the daytime. The folding design is suitable for the interior of the studio, with the help of corner model easy to zone the room.

The question of how to choose a sofa bed is easy to solve, given a few points:

transformation type. The most popular models are "", "", "" and "";
sofa shape. There are direct and corner options, they are easily located near the wall or adjacent surfaces and do not take up much space, do not interfere with convenient movement;
spacious drawers for bed linen.

Bedroom with bunk bed

Square modern apartments must be used judiciously both horizontally and vertically. in narrow bedroom helps to compactly equip the room and minimize space consumption. High models can be a real find for a nursery or teen room, a highlight - for an adult. Bunk beds are made of wood or metal, equipped with steps, can be supplemented with storage boxes, full-fledged sectional cabinets. Children's models look fun and bright, adults look more concise.

Bed-podium in the bedroom

Recently, it has become fashionable to equip a place to sleep on a hill. has two varieties:

Traditional frame, sheathed flooring on top of which the mattress is laid. The model is suitable for a spacious room.
Modern version if niches are provided in the hill. They have a retractable sleeping place, leaving on guides. A table and a locker are set up on the podium. This design allows you to combine a place to work and a sleeping area.

Beautiful beds in the bedroom, located on a hill, can be decorated with steps, lighting, additional niches, enclose with an air curtain located on a cornice attached to the ceiling. Podium - comfortable additional system storage, drawers located in it in one or two tiers can replace a full-fledged chest of drawers.

How to choose a wooden bed?

Wood is a durable, flexible material that can be easily carved, glued, painted, and parts of any shape can be made from it. The sleeping bed made of solid wood is durable and luxurious in appearance. Deciding how to choose wooden bed, the main thing is to find a model for the chosen interior design right size. Wood is often decorated with carved figured headboards, forged elements, inlays, bent legs and massive canopies from powerful racks with balusters.

The laconic bed in the bedroom looks beautiful modern style, made of bent solid wood with a headboard with smooth lines, built-in lights. And a deliberately rough wooden model in the form of a podium made of boards covered with a mattress, and the same back - perfect option for a country country bedroom. The snow-white model with graceful Provence forms is a favorite for girls and a romantic French room.

Bedroom with wrought iron bed

The metal frames for the bed are unlimited possibilities for decoration. When deciding how to choose a good bed, you can stop at forged version selected for the desired interior style. Most of the forging is in the back and headboard. They are strict geometric shape(classicism) or with openwork forms, in which leaves, stems, flowers (modern) predominate, can be supplemented with wooden details.

A luxurious baroque interior can be decorated with an expensive model with an abundance of curls, inlays, and gilding. Products are painted in strict black, elegant white, pleasant bronze or silver color. In the interior, forged models go well with natural wood and glass. They are strong and durable due to the presence of metal in the construction.

How to choose an air bed?

Such products are relevant for those who often go out into nature or like to receive guests at home. When deciding how to choose a sleeping bed with an inflatable effect, you need to pay attention to some of its parameters:

size (single, double or one and a half);
the presence of a built-in pump;
it is better to choose a sleep cover from flock, linen does not slip on it;
shape: products with head restraints are considered convenient, high-quality products with longitudinal fastenings of parts.

How to choose a double bed with a lifting mechanism?

Furniture with additional features gain popularity. On the lift-up model, the base can move vertically to provide access to ample storage. Such designs are relevant for rooms in which there is a shortage of space for placing things. The design of the furniture is varied, models with a covered frame and an elegant headboard made of eco-leather, wooden options are popular.

In addition to the classic rectangular shapes you can find luxurious round sleeping beds. When deciding how to choose a wooden bed with a lifting mechanism, you need to consider:

dimensions;
lifting device type. The gas shock absorber does not require the use of force, it is able to withstand mattresses of any weight, even orthopedic ones. But in order to raise the bed with a spring mechanism, you need to work hard, in addition, the device may fail if there is a heavy base;
wooden frames must be of high quality

Bedroom with wardrobe bed

Transformers are in demand small spaces. Wardrobe bed for a small bedroom due to the lifting mechanism during the day easily hides behind the doors of the wardrobe, freeing up space in the room. When choosing a model, pay attention to the characteristics:

design execution and functional content. The design can be supplemented with mezzanines, a roll-out table, ottomans, cabinets, a self-folding leg that acts as a shelf;
model size. single or double. Depending on this, they are laid out vertically or horizontally. In the second case, the cabinet resembles a chest of drawers, on which books or a TV will fit perfectly on top;
folding mechanism. There is an automatic gas shock absorber or a less reliable manual spring.

Healthy sleep - important component human life. The question of how to choose a bed arises when arranging a comfortable and beautiful bedroom. High-quality base, orthopedic mattresses, stylish design, modern and reliable materials are the main factors that you need to pay attention to when buying. Competent selection of the form, size of furniture guarantees a strong and healthy rest, and a beautiful sleeping bed will become a highlight of the interior.

The issue of saving space is still relevant for most apartments in high-rise buildings. Therefore, along with quality and appearance, it is worth paying attention to the ergonomics of furniture. Usually the room that is allocated in the apartment as a bedroom has limited square meters, and it is simply not possible to place numerous furnishings in it. The recently popular bed with a lifting mechanism serves as both a bed and storage for bedding.

What is a lift bed?

The base of the bed with a lifting mechanism is a hollow box made of natural wood or chipboard, reinforced in places of greatest load.

Wooden beds are more expensive than chipboard or fiberboard, but they make up for it in quality and durability. The base for the bed, which is installed on the box, is a metal frame with lamellas. For the bed you can choose orthopedic mattress to size.

The cost of the product also depends on the type and quality of the lifting mechanism itself. The most budgetary is a manual hinged lift. This is not the most good option, since only a man can handle the weight of the bed. Beds with spring lifting systems are easier to handle. The majority modern models equipped with mechanisms on gas shock absorbers, thanks to which the bed rises almost automatically.

There are single, double and children's beds with a lifting mechanism. As upholstery material leather, natural and synthetic fabrics.

Pros and cons of beds with a lifting mechanism

The advantages of this type of bed are obviously more than the disadvantages:

In the box under the bed, bedding and other accessories for sleeping will be stored hygienically, compactly and at hand.
There is no need to clutter up the bedroom with a separate chest of drawers or closet to store the items mentioned above.
Typically, the laundry box is installed directly on the floor, which greatly facilitates cleaning in the bedroom. There is no need to vacuum and mop the floor under the bed.
The presence of a lifting mechanism does not limit the design possibilities of beds.

Among the disadvantages are expensive price and malfunction of the mechanism, and then only in the case when it was initially of poor quality. Also, it is not always possible to choose a mattress for a double bed without problems, most of them are too heavy for the lifting mechanism.

Assembling a bed with a lifting mechanism

Often a bed with a lifting mechanism is delivered from furniture store disassembled. In this case, you can use the paid assembly service provided by the manufacturer or seller, or assemble the bed according to the instructions.

Usually, the whole process consists of attaching the headboard and footrest to the side panels of the frame. The parts of the bed are connected with the included screws. The bed frame is attached to the base with the lower part of the lifting mechanism. Next, lamellas are installed in turn, special nests are provided for them.

An integral element of the interior and required item furniture for any home comfortable bed, which can shelter a tired owner on its soft and hospitable mattress. What distinguishes a bed from an ordinary couch or sofa? Size and convenience, no doubt, however, there is one more detail - bed linen.

The bed must be made, otherwise it looks untidy and does not decorate the bedroom at all. Naturally, it is easy to buy bed linen and this is not a problem for a person with any income level. The problem is different - as a rule, there is nowhere to store linen, especially if there are several sets in the house. In such cases, a bed with a lifting mechanism helps out a lot.

What is a lifting mechanism?

It is difficult at first glance to distinguish an ordinary bed from one with a mechanism for lifting inside the structure. But, approaching such a model closer and looking under it, you can see big box, which is ideal for storing bed linen, bedding, pillows and just things that have not found a place in the interior.

A deep niche in a bed with a lifting mechanism from the manufacturer can accommodate even such voluminous and massive things as feather beds - special mattresses for those who like to sleep softer and more comfortable.

The principle of operation of the lifting mechanism

The lift raises the bed up and holds it in the desired position for the required time. The mechanism works on powerful springs or gas shock absorbers that securely hold upper part beds on weight while the owner puts or takes away bed linen from a niche.

The advantages of lift beds, whether single or double, are obvious. The first thing to note is a huge storage room with a size of about 180x200 centimeters, thanks to which the space of the room is saved. Such beds are especially comfortable in children's or small bedrooms where every centimeter of space counts. Secondly, it is a lifting elevator, which is easy and convenient to use. Thirdly, the unfolded mechanism does not take up space, which cannot be said about traditional drawers.

If we talk about the minuses, then the only drawback of the model is the inability to use the lifting mechanism when someone is resting or sleeping on the bed. Otherwise, such a model is a solid set of pluses, including durability of the structure and ease of use.

The cost of empty space in modern living spaces often outweighs the cost material assets in these premises. This leaves a certain imprint on the choice of furniture and organization interior design. A properly selected double bed with a lifting mechanism can solve several problems at once. Firstly, this is a bed that has a pleasant view and is designed for two people. Secondly, it can store a lot of things due to the considerable volume. inner space.

Among positive qualities beds with a lifting mechanism, the following can be noted:

Absence drawers, limiting the distance to the walls and having a much lower capacity and service life;
The orthopedic frame is included in the design of the bed and does not need to be purchased separately;
Convenient access to the contents of the internal space. The mattress smoothly rises with a special mechanism, without requiring significant effort;
Substantial savings free space in the bedroom and the apartment as a whole;
The material for the manufacture of such furniture solutions allows you to choose best option by price, appearance and functionality of the product;
Relatively easy care. The design has no areas inaccessible for cleaning.

There are also negative aspects:

The horizontal arrangement of the bed frame, which is also a closet, contributes to the rapid accumulation of dust and debris. However, this is easily eliminated by timely cleaning;
A high-quality lifting mechanism is not cheap, and its budget counterparts have a much smaller operational resource. This point should be taken into account when choosing and, if it is intended to frequently raise the structure with a mattress, focus on the quality of the mechanism;
The area that is affected by the main weight of the sleeper may sag over time. The likelihood of such a problem depends on the weight of the user, the features of the mattress and the orthopedic base;
In the vast majority of cases, double beds with a lifting mechanism are overall products that have a high mass. The combination of these two factors imposes a number of restrictions on bed movements that cannot be carried out alone without damaging the flooring;
The design of some beds makes it extremely inconvenient or even impossible to clean the space under the bed.

Types of mechanisms and opening options

The mechanism for lifting the mattress largely depends on the type of bed. If this bed is stationary, it will most likely have a Victoria lifting mechanism, for which gas shock absorbers or coil spring devices are used. For built-in beds, a hinged mechanism is used, the design of which may differ depending on the direction of folding.

Opening options are distinguished by the method of implementation and the direction of folding. Most often, beds are equipped with a manual lifting mechanism, but there are solutions with an electric drive and a remote control. remote control. Beds are folded in two directions - horizontal and vertical, more often you can observe last option. Let us consider in more detail each of the types of lifting mechanisms.

Gas shock absorbers

Beds equipped with such devices are the most convenient to use. When lifting the orthopedic block with a mattress, the entire load falls on the lifting mechanism, which allows you to open the bed without much effort.

The mass of the structure, which can be lifted by gas shock absorbers, directly depends on the pressure in the pistons and can reach 100 kg. This makes it easy to cope even with massive models of mattresses and orthopedic frames. The disadvantage of shock absorbers is their high cost, which, on the other hand, is offset by reliability, convenience and long service life.

spring mechanism

Models on coil springs have a more affordable cost, and therefore are still in demand by the consumer. Although according to some observations, the demand for them is steadily falling. There are a number of reasons for this, the main of which is the small operational resource of the mechanism.

For the manufacture of springs, high-quality steel is needed, which the manufacturer does not want to spend on cheap products. As a result, the life of the spring averages from 3 to 5 years, after which it stretches and stops working. The service life does not depend on the number of lifts, because the spring is in its maximum stretched state when the bed is folded. It is impossible to replace only a failed element of the mechanism, it is necessary to change the assembly completely assembled.

Another disadvantage of spring blocks is their significantly lower lifting power compared to gas shock absorbers, which is also constantly decreasing. A child will not open such a bed, some female representatives, too.

on hinges

The easiest and most affordable option. To gain access to the contents of the internal space, the mattress will have to be removed. In addition, you will have to get objects with one hand, with the other you will need to hold the structure so that it does not fall on your head. Of course, you can ask someone to hold or support something, and some designs provide for fixation. Nevertheless, such mechanisms are still popular, which is facilitated by simplicity, reliability, almost unlimited service life and, of course, cost.

Bed options (frame form)

The main components of the bed are the frame, base and mattress. The mattress can be ordered separately or you can use the one left from the previous bed. The base is what the mattress lies on and with which it rises through the appropriate mechanism. Well, the frame is actually a large box for useful things, on which the base and mattress are located. So, what you need to know about these elements when choosing a double bed with a lifting mechanism.

frame

The first thing you need to pay attention to is the dimensions of the bed. This factor is especially important if the bed is taken under an existing mattress or there are space restrictions. Exist standard sizes both beds and mattresses. Double options can be 1600, 1400 and 1200 millimeters wide. The length in most cases is 2 meters, specimens of 1900 mm are much less common. If a length of more than two meters is required, such a bed will have to be ordered individually, as well as a mattress. This also applies non-standard solutions, such as round, oval, heart-shaped or other objects.

The three most common types of frames are:

The first type is characterized by the presence of two backs and two side panels (tsarg). In the budget version, the entire frame is made of laminated chipboard (LDSP). Connections are made using furniture corners or eccentric couplers (minifix);
A more expensive option differs in that it has a rough frame (similar to the one described above). To it, in turn, are attached decorative backs and overlays on the sides. Outwardly, such beds look much more spectacular, which largely depends on the material. decorative elements. Support, as in the first case, falls on the backs;
The most reliable frame is an option reinforced with an additional cross member made of chipboard, which is located in the middle of the structure and serves as a support. In addition, in the design of such frames there are legs, on which part of the load also falls.

One detail that any of the above types of bed frames has is its lowest part, in other words, the bottom. This element is sometimes subject to considerable loads, because some owners put a lot of different goodness inside the bed. Nevertheless, it is made in most cases from fiberboard, which is not at all distinguished by high strength, but is used because of its relatively low mass. A more expensive, but just as light and more durable option is plywood.

Base

As mentioned above, on this element lies the mattress and, of course, the owner himself. On cheap beds, the base can be made of chipboard. Despite the relatively high strength of this material, over time it sags. This is because the base of a double bed with a lifting mechanism is always in the same position, as it is bolted to this mechanism. That is, if it could be turned over, then the deflection would not acquire such noticeable forms.

On the good beds use a different type of base. Typically, it consists of metal frame filled with lamellas. The frame is made from square pipe or corner and includes several sections. Their number depends on the beds, but there are deviations both up and down.

The space between the sections is filled with slats, which allows air to reach the bottom of the mattress, preventing dampness. Lamellas are arranged with a certain frequency, usually there are at least 30 of them. In addition, they are slightly curved and installed in such a way that the curve is directed towards the mattress. This provides the best orthopedic effect, preventing sagging of the most loaded parts of the base. The lamellas themselves are made in most cases from wood. hard rock: beech, ash. But there are also plastic products.

Bed ottoman

Quite comfortable and at the same time compact furniture solution. Its main purpose is to save usable space in small spaces. Externally, the ottoman is a frame made of laminate or wood, equipped with a lifting mechanism. Main distinguishing feature from a regular bed is the presence of a side back, which you can lean on. The corner design is also quite common.

Appearance and decor

The appearance of the bed is determined by the material of manufacture of the outer elements, the shape and configuration.

Materials used for manufacturing and finishing:

Most inexpensive options they are made from chipboard imitating wood or, which is much less common, stone;
If you look in ascending order, then the next most presentable option is also a chipboard frame, but with decorative overlays. These slips are most often upholstered with leatherette in white or another color, so that the bed takes on a completely different look. Any material can be used as upholstery: with or without a pattern, plain or colored. Leather upholstery made of natural materials it is somewhat less common, since it costs much more, and in terms of practicality and appearance it is not much superior to dermatin;
Wooden beds. As you might guess from the name, an array of valuable wood species such as oak, ash or beech is used here. There are products made entirely of wood, as well as those with only wooden lining, and the frame itself is all from the same laminated chipboard.

In addition to the materials described above, there are also rarer ones, the use of which is purely individual. It's about forged metal structures, products made of glass, plastic, natural or artificial stone.

Form and equipment

The standard and most common form of double beds with a lifting mechanism is rectangular. But this does not prevent to diversify the appearance, for example, relief design backs and side pieces. Also, in addition to the classic rectangular shapes, there are round options with a soft headboard.

As additional equipment, the bed can be equipped with built-in lockers or bedside tables. These accessories serve as stands for a lamp or as shelves for storing various small things.

Requirements to consider

Important points that you need to pay attention to before choosing a double bed with a lifting mechanism:

Bed nodes should not make sharp sounds during operation, namely squeaks or rattles;
The base of the bed should be flat, without sagging or deflection. Except as otherwise provided by the manufacturer;
The storage area closes tightly and does not have extra holes through which dust and other debris will enter;
The materials used to make the mattress and other components of the bed do not cause allergic reactions;
The product is convenient to use, easy to open, equipped with a handle or a belt to raise the base with a mattress.

If the bed has already been bought, in order for it to serve properly for the entire set period, you need to follow some rules:

Should not be stored in a box food products, strongly smelling liquids, caustic and toxic substances;
Children should not be allowed to play inside the box, for example, hide and seek.

Some pets have a habit of chewing or scratching the outer frame cover. In order for the bed to retain its attractive appearance longer, protect access to the product to such pests.

Categories

Popular