How to make a slime at home - different ways from improvised means. Make a slime out of toothpaste and glue? Elementary Simple

Slime is a stretchy, spreading toy that can take any shape, stretch and flow smoothly from one hand to another. Such a thing is sold in children's toy stores, but you can make it yourself. In this article, we will show you how to make a slime using PVA glue in combination with other ingredients. The most popular slime ingredients combined with PVA glue are shampoo, baking soda, and toothpaste. Making these fun toys at home is profitable and fun. You can adjust the color, elasticity, transparency and make an exclusive thing out of it.

The history of the origin of slimes

The initial interest in this toy appeared in the 1990s, when the animated series "Ghostbusters" was released on television boxes. The first hero, which was the green slime ghost.

In general, this toy was made back in 1976 under the direction of Mattel. The composition included components of guar copper, minerals, borax, which make the toy slimy and stretchy. But there was a substitute for all these chemical elements- PVA glue. That is what we will be using.

How to make a slime with PVA glue and shampoo

There are a lot of recipes for this toy. Let's take the most popular one. Based on the recipe, in order to make a slime with your own hands, you need only three components:

shampoo;
PVA glue;
food coloring or gouache;

You need to mix these components in a ratio of 3 to 1. Three parts are glue and one part is shampoo. In order to make the slime from PVA glue and shampoo saturated, you can add a pinch of bright dye.

What glue to use for the slime? It is advisable to choose a transparent one, and among them Titanium is popular, since it contains all the necessary properties to give softness and elasticity.

It is worth considering that elasticity depends on the amount of glue, that is, the more glue, the more elastic it is.

How to make a slime with PVA glue and toothpaste

There is also a slime recipe made from PVA glue and toothpaste. It only needs two components:

PVA glue;
toothpaste.

Mix half a pack of toothpaste with one tablespoon of glue until smooth. Glue must be added if the toy has not reached the proper consistency. Place in the refrigerator for 15 minutes. The toy is ready to use.

Don't let the smell of toothpaste scare you, it disappears soon.

The toy actually turns out to be 2 in 1, since when cold it can be used as an anti-stress toy, to cheer up, and when room temperature on purpose, like a lizun.

There is another recipe using toothpaste, but without the use of glue. The paste should be placed in the microwave for 2 minutes, then removed, mixed and returned to the microwave. We repeat this procedure three times. After cooling down, apply sunflower or body oil on your hands, knead the mass for 2-3 minutes and you're done.

How to make a slime with PVA glue and baking soda

There is a wide variety of recipes using two main components, like PVA glue and soda, and we will consider the two most popular.

First recipe

So, in the first case, you will need:

PVA glue;
baking soda.

Pour the glue into a container, give it color by adding a dye. Pour 30 g of soda into another container and pour a glass of hot water. When the water with soda has cooled, pour this solution into the glue. Then we collect it from this liquid so that it does not stick to our hands, we additionally dip it into the solution. After that, the slime made of soda and PVA glue is ready for use.

Second recipe

For the second recipe you need:

"miracle clay" (with foam);
PVA glue;
baking soda.

Pour into the "miracle clay" hot water, mix, separate the liquid from the foam balls. After that, add glue there, mix.

Glue must be poured along the walls of the container so that there are no bubbles in the slime.

In the second container, combine soda with hot water, cool. Then we combine the two containers and mix for about 1-2 minutes.

Divide the mass into containers, paint in different colors. Leave open containers for 15-20 minutes and then you can enjoy transparent colored slimes.

Slime is the happiness of children of the 90s of the last century and the nightmare of their parents. The name "lizun" was given to the toy after the release of the film "Ghostbusters", where one of the characters bore this name. The little gluttonous ghost ate everything that came in its path, smashed into a cake at speed against all sorts of obstacles and adored kissing slobberingly. For the similarity with this screen character, the toy fell in love with the children. And now many of them are bought with slimes in stores, and those who are more economical and more inventive do it themselves at home.

What is this strange toy

If you see on sale a plastic jar or container filled with a jelly-like substance with the inscription "Slime" or "Slime" on the package, then this is it. To understand what it is, you can only take the slime in your hands. It is soft to the touch, wrinkles and stretches well, sticks to the walls, and then slides off them, often leaving greasy spots.

Left alone, the slime spreads over the surface in a puddle, but is easily collected by hands into a ball. It can stick to the hands, flow through the fingers, but become elastic when it hits the wall.

Slime was originally made from guar gum, a polysaccharide, and sodium tetraborate, better known as borax. The result was a material similar to slime, but with the properties non-newtonian fluid. It does not spread, it is easy to assemble, and compacted upon impact.

There are many types of slime, here are some of them:

Slime. The mass, similar to jelly, is usually transparent. Does not stick to hands, flows through the fingers in long threads, spreads over a hard surface into a puddle.

Slime is soft and sticky

Antistress. This is mucus, placed in an elastic shell, covered with a cellular mesh. Forms bubbles when pressed.

Lizun "antistress" well relieves nervous tension

Gum for hands. More dense elastic mass. It is easy to wrinkle and stretch.

Gum for hands is more dense and elastic

Jumper. The densest slime. It is less elastic, but elastic. Bounces off hard surfaces.

Elastic bouncer bounces well off hard surfaces

Fluffy slime. Fluffy and very pleasant to the touch. Wrinkles well, stretches.

Fluffy slime - the most lush and airy slime

Plasticine. It keeps its shape better than others. Due to plasticity, various figures can be sculpted from it.

Plasticine holds its shape better than others

There are slimes that adhere well to surfaces, matte, transparent, with foam balls, mother-of-pearl, luminous, of various colors.

Of course, such a toy can be bought in a store, but it is more interesting to make it yourself from improvised means. What's more, it's quite easy to do.

How to make different types of slimes at home

What the industry makes modern slimes from is not known for certain, but what happens when sodium tetraborate is used when homemade the substance turns out to be very similar to a purchased toy - a fact. Let's start with this recipe.

From sodium tetraborate and PVA glue

Let's prepare all the ingredients:

Now you can pick it up, pull it, crush it, throw it and collect it again - the slime is ready.

Advice! When choosing a dye, remember that some of them will stain your hands.

With hair or shaving foam

Fluffy slime is made according to the same recipe. To give the slime fluffiness, hair or shaving foam is introduced into the composition.

Pour the glue into a suitable container.
Attach foam to it. the amount depends on how fluffy the mass should be. Stir.
Add a dye, you can use aniline or any other. Mix thoroughly again.
Pour sodium tetraborate into the mixture little by little while stirring. As soon as the composition thickens enough and begins to lag behind the walls of the dishes, it can be picked up and played.

The main condition for success in the manufacture of this type is good glue. If it does not thicken, all the work will go down the drain, nothing will work out.

From PVA glue and soda

But not only borax is used as a thickener. This function is perfectly performed by baking soda.

Dissolve baking soda in a little water.
Pour the glue into a bowl, add the dye and mix.
Little by little add soda solution while stirring thoroughly. Wait until the mass thickens. This will not happen immediately, so do not rush to add more soda solution.
Knead the prepared mass in your hands. It will turn out even softer and more tender than the previous one, it wrinkles and stretches well.

Slime can be made shimmery by adding glitter to it

From alcohol and silicate glue

Used to make slime and silicate glue. But the properties of the toy will be different.

Pour the glue into the bowl and add color with any dye.
While stirring in a circular motion, add a little alcohol. You will see how the mass thickens, forming dense lumps.
Leave the substance to rest for 20 minutes.
Gather into a ball and knead well with your hands. Such a slime will not stretch and stick, its consistency is quite dense. But it will make an excellent jumper.
Roll the mass into a ball and try to hit it on the floor. The elastic ball bounces well off hard surfaces.

From starch and hydrogen peroxide

A hard bouncy ball is easy to make with ordinary starch. This will not require high costs, the toy will cost a penny.

Mix 100 g of starch with 200 ml of hot water until a jelly-like mass is obtained.
Let cool and combine with 100 ml of PVA glue.
Add a suitable dye and a few drops of hydrogen peroxide. Mix everything well. Hydrogen peroxide will give the toy lightness and airiness.
Roll the resulting mass into a ball. The jumper is ready.

Video instructions for making slime from glue

From glue "Titan" and shampoo

A simple way to make a slime is with Titan glue. This glue is non-toxic, and after drying does not lose elasticity.

Mix glue with shampoo in a ratio of 3:2. The color and transparency of the toy will depend on the shampoo. For more color intensity, add dye.
Leave the mixture for a while to thicken, usually it takes 5 minutes.
Slime is ready. Simple and fast.

According to this recipe, it is not always possible to get the desired result, different shampoos behave differently. But it's worth a try, because you have nothing to lose.

Advice! Stir the mass until it lags behind the walls of the dish and stops sticking to your hands. These are signs of the readiness of the toy.

From glue stick

Another type of glue - a pencil, is also quite applicable for this purpose. Here we again need sodium tetraborate.

To do this, you need 4 pieces of glue stick. Remove the rods and put them in a fireproof dish.
Using a microwave or oven, melt the rods until a viscous mass forms.
Add dye to the glue mass, mix.
In a separate bowl, dissolve borax in a small amount of water.
Gradually add the solution to the glue with constant stirring, until the desired consistency is obtained.

Two video recipes for making slime

From plasticine

Slime can be made not only from glue. A good and durable toy is obtained from plasticine.

You will need:

plasticine - 100 g;
gelatin - 15 g;
water - 250 ml.

Soak gelatin in 200 ml cold water using fireproof cookware.
When the gelatin swells, bring it to a boil at slow heating and remove from heat immediately. Let it cool down a bit.
Knead the plasticine so that it becomes soft. Mix with remaining water.
Combine still warm gelatin with plasticine, mix well until a homogeneous mass is obtained.
Place in the refrigerator for half an hour.

Such a toy can be safely given to children, because it does not contain harmful substances. There is a small problem: this type leaves greasy stains on the wallpaper. Make sure children don't throw it against walls.

From toothpaste and liquid soap

Quite safe option- Toothpaste slime. You can use regular and gel paste.

Mix 20 ml of toothpaste and liquid soap with 5 teaspoons of flour.
Stir until there are no lumps, first with a spoon and then with your hands. So that the mass does not stick to your hands, moisten them with water and knead well again.

From soap and shampoo

For the next look, you need only two ingredients that can be found in any home. This is liquid soap and hair shampoo.

Mix liquid soap and shampoo in equal proportions until smooth.
Place in the refrigerator for a day.
Take it out and have fun.

Since this slime is made up of water-soluble substances, keep it away from moisture. From the heat of the hands, the toy quickly softens, you need to store it in the refrigerator. And do not allow contact with dust and dirt, it will not be possible to wash the slime. With care, this toy will last about a month.

From hand cream and perfume

You can even make a slime from hand cream. There is no guarantee that the toy will work, but it's worth a try.

Squeeze the cream into a bowl.
Add paint and stir.
Gradually adding perfume, mix everything thoroughly. The mixture will start to thicken.
Having achieved the desired consistency, knead the toy with your hands.

From flour

Often parents are afraid to give slime to young children for fear that they will put it in their mouths. For such a case, you can make a completely safe, edible slime without chemistry.

For this you will need:

flour - 400 g;
cold water - 50 ml;
hot water - 50 ml;
food coloring.

Sift flour into a bowl, mix with dry dye.
Add cold water, stir again.
Pour in hot water, knead the resulting dough well. It should be smooth and without lumps.
Place the dough in the refrigerator for several hours.
Once again, knead well with your hands.

Not all foods and substances are suitable for making slime. Not everything that looks like a slime has the necessary properties. To avoid making mistakes, watch the video.

Video experiments on making slime from different ingredients

How to give the slime the desired properties

Even if the slime turned out not the way you wanted, it can be fixed.

Vinegar will make the toy more elastic. Pour in a few drops and the slime will stretch better.
By adding hydrogen peroxide, you will get a lush mass, this is how fluffy slime is made.
A few drops of glycerin will help make the toy slippery.
Luminous slime can be obtained using fluorescent paint.
If the slime is too soft, put it in a jar, put some salt crystals in it, close the lid tightly and leave it overnight. Salt will pull excess water and restore elasticity to the toy.
Too hard slime will be softer if you put it in a container overnight and pour in a few drops of water.
To make the toy smell pleasant, scent it with essential oil, food flavoring or vanilla.
A magnetic slime can be made by adding small metal filings or iron oxide to it. Knead the toy well so that the additive is evenly distributed. And then your slime, as if alive, will reach for any magnet.
An anti-stress toy will turn out if you place the slime in balloon. This can be done with a large syringe without a needle.
To increase the slime, place it in a container of water for 3 hours. Don't be scared if it falls apart, that's the way it should be. Add some salt and hand or body cream. Stir. The slime will not only restore elasticity, but also become larger.

Advice! Add multi-colored to the soft slime foam balls. This will make it colorful and increase in volume.

Rules for storage and care

Slime is a capricious toy and its lifespan is short. To extend it, you need to know how to properly store and care for the slime.

The slime is stored in plastic container with tightly closed lid.
To keep the slime from drying out, keep it away from heat sources, do not leave it in the sun.
A dried slime can be revived with a drop of water, a wet slime - with salt.
Lizun needs to be played with. Long term storage may lead to mold. This toy will have to be thrown away.
Frequent use will lead to rapid contamination of the toy and loss of properties.
Avoid contact with fleecy surfaces, the slime will collect hairs on itself and become unusable.

Slimes are not just a children's toy, some species have and practical use. For example, they can clean computer keyboard or clothes from adhering rubbish. Elastic ones develop fine motor skills, increase finger strength. Yes, and just soothe, relieve stress and give good mood. Make slimes and play, it's so much fun!

Good afternoon, dear readers of the Raduga-Alkostad.ru blog! Today we will talk about how to make slime at home for the joy of yourself and your children. All recipes, with or without specific ingredients, necessary materials, tips and tricks on how to easily make simple and complex slimes at home you will find in this article.

Lizun, or Slim, Handgum, - a toy that became famous thanks to the release of the famous animated film for children - "Ghostbusters". One of the main characters of this picture was a ghost named Lizun. The film was produced by Mattel, which originally released it under the name Slime.

After the film was translated into Russian, this toy began to be called " Lizun". The peculiarity of the toy is that it is able to stretch, spread, take any shape. You probably saw that such toys can be thrown at a wall or other object, it stuck to it.

How to make a slime at home: materials, conditions, tips

An extraordinary, very curious Lizun quickly gained popularity among children, which led to its mass release around the world. Slimes are still very popular today. Buy this funny toy you can in the store, but it is much more interesting to do it yourself with your own hands.

Making slimes at home from improvised material is not difficult at all. For its manufacture, methods are often used: with shampoo, with water, from plasticine or soda, with or without sodium. In the process of preparing a toy, you can independently adjust its density, color, using food coloring, gouache.

How to make slimes at home for children: recipe, tetraborate, PVA

Materials to make your own slime at home

The choice of materials is large, these include:

gum;
water with starch;
flour;
gouache;
condensed milk (to give the toy taste).

Is not full list all materials, more on this below. Now we recommend that you familiarize yourself with the basic tips and recommendations for making toys if you want to get a quality product.

the main storage condition for the slime is closed dishes: a small jar with a tight-fitting lid;
the toy should not be left in direct sunlight, near room heaters or batteries (the lizun feels comfortable at low temperatures);
do not put the slime on a fluffy surface (carpets, woolen clothes), because the fluff will stick to the slime, which will lead to a violation of the uniformity of its surface;
in order to make the toy unique, when creating it, add to the recipe not a large number of essential oils, they give the slime a pleasant aroma;
for greater originality of the slime, you can add a small amount of cosmetic sparkles to the mass being prepared, this will give the toy a certain “glamour”;
the craft will taste good if you add sugar or condensed milk, salt to the recipe;
for greater plasticity and ductility of the toy, so that it does not leave marks, add a few drops of table vinegar to the paint solution;
to make the slime natural, add a little glycerin, this will make it slippery;
hydrogen peroxide when added will make homemade slime easy and air;
to "revitalize" the toy, when making it, take a few rubber buttons, stick them on the place where the slime's eyes and nose are planned. It all depends on your imagination: use improvised means, do home crafts the most plausible.

How to make slime at home: recipes

There are many materials for making slime, we will consider the simplest and most popular methods.

We make a simple slime from water, PVA and sodium tetraborate

The easiest and most popular way. At the exit, the slime differs little from the one sold in the store.

For manufacturing you need:

100 grams of PVA glue. It is good that the glue is fresh.
Sodium tetraborate solution (4%), or powder from it will do. Sodium tetraborate can be purchased at a pharmacy, is inexpensive and always in stock. This solution is often used in jewelry workshops, they sell Tetraborate, where radio products, chemical reagents.
Dye in the color you want. It is better to use food coloring, it is safer. Or use gouache, methylene blue, brilliant green (brilliant green).

The creation process of 3 stages:

First, prepare a small container for the craft solution. Pour one-quarter cup of some warm water into it.
Take 100 grams of PVA glue and pour it into a container of water. The density of the toy will depend on the amount of glue, determine this yourself. If the mixture seems too runny, add a little more glue than necessary. Mix everything well.
Then add sodium tetraborate. When you use a tetraborate solution, 100 gr. one bubble is enough. If tetraborate powder is used, dissolve 1 tablespoon of it in half a glass of water and rinse into a container.
When finished, add dye.

Well, the mixture is ready. Now you can take a container with the mixture, pour all its contents into a plastic bag and knead well.

Now you have a toy - a simple slime made of water, PVA glue and sodium tetraborate.

How to make slime from baking soda

When there is no sodium tetraborate at hand, then the method will do just fine. But keep in mind that such a slime is short-lived, it will be possible to play with it for no more than 4 days.

Required components:

PVA glue.
Soda.
If needed, food coloring.
Plastic container.
Stirring stick. If you interfere in manual mode, use rubber gloves.

Creation method:

Take a plastic container, mix in it one fourth of a glass of warm water and 50 grams of PVA glue until a homogeneous mass is obtained;
Then add desired color dye and stir again;
Take some more separate container, mix in it one quarter cup of water and one tablespoon of sodium bicarbonate (baking soda);
Pour the contents from the second container into the main container and mix well.

The whole process is completed, the soda slime is ready!

We sculpt a slime from plasticine

A plasticine toy differs from other slimes in that it can perfectly hold the shape given to it.

To create such a slime you need:

food gelatin;
plasticine;
container, better fit plastic utensils;
additional container made of metal;
spatula for mixing.

Process of creation:

first you need to pour a certain amount of cold water into a metal container and add gelatin to it. Required proportions components can be read on the packaging. After, let the gelatin stand in water for one hour;
after an hour, put the container on the fire, bring the contents to a boil. As the water boils, remove the container from the fire;
then pick up 100 grams of plasticine and knead it well so that it warms up;
then take a plastic container, pour 50 gr. tolerantly hot water, mix the clay in it well with a spatula;
further, pour the contents of the metal container into a plastic container and mix well until smooth;
Put the resulting mixture in the refrigerator until completely cooled.
the process is completed, you have a plasticine slime.

How to make slime from shampoo

This method is easy to prepare, but not reliable, although it is very popular among the population.

You will need:

Glue "Titan". Choose this type of glue, be sure to check the expiration date, expired glue can ruin the toy. You can buy such glue at any stationery or household store;
Any shampoo;
Rubber gloves.

The process of creating a toy:

Take a plastic bag, pour shampoo and glue into it in a ratio of 2: 3;
Stir the resulting mixture until it thickens completely.

Remove the finished toy from the package and delight your child!

How to make slime without sodium

If there is no sodium tetraborate at home, use this method. For manufacturing you need:

warm water;
starch;
dye;
sequins;
essential oils.

How to do

take starch and water and mix them in a ratio of 1: 1;
add a small amount of dye and stir again;
use sparkles as desired, they give the craft brightness, unusualness;
essential oils are needed to flavor the toy in order to give it a pleasant smell.

Mix all of the above and you get new variety slime.

At the end of the publication, I would like to say that the Lizun toy is very exciting, able to give joy and interest to your child, close person. Lizun helps children develop fine motor skills of the hands, and through this, the functions of the brain improve - the central nervous system. The toy is relaxing.

Video

How to make slime at home without tetrabor

Hello! You are on the Miss Melodi channel. In this video, I will show you how to make slime at home without sodium tetraborate.

How to make slime from sugar and toothpaste without glue and tetraborate

Slime from toothpaste, the coolest!

On Alex Boyko's video channel.

Good luck and success to you!

Many people know that making slime from toothpaste is not at all difficult. The products that are commonly used to prepare them are always available and can be found in any store or pharmacy. Slimes are made from flour and even toothpaste. The last method will be discussed. Here we will consider different recipes preparation of such slime. Since the recipes will be detailed and step by step, you can easily create any slime.

We have prepared three best recipe slimes and slimes from toothpaste. Let's start with the simplest ones and work our way up to the more difficult ones. If you want more recipes, then we suggest that you read the article where we collected slimes, and also we have appeared.

Slime with toothpaste and PVA glue

The first recipe consists of only two ingredients, but this does not mean at all that the result will be a weak slime. Simple doesn't mean bad! In addition, if you take the gel toothpaste bright color, then the slime will turn out to be immediately colored and dyes will not be required. So let's get started.

Ingredients:

PVA glue
A tube of any toothpaste
Container and mixing equipment

Now let's move on to cooking:

Squeeze into a bowl required amount pastes. You can use a whole tube to make the slime big.
Now add some glue to the paste and mix. If the paste does not begin to thicken, then add the same amount of glue.
Stir until the mass begins to thicken and lag behind the walls of the dish, adding a little bit of glue.
Put the dishes with the future slime in the refrigerator for 20 minutes.
After 20 minutes, remove the slime from the refrigerator and take it in your hands. Start kneading until the mass becomes homogeneous.

Slime is ready! At first, it may smell strongly of mint, but after a few hours the smell will disappear and will not be so sharp.

Toothpaste and shampoo recipe

Now consider the following recipe with toothpaste and shampoo. Cooking this slime will not be more difficult than the previous one. You will need these ingredients:

thick shampoo
Toothpaste
Liquid dye of your favorite color

Here is a step by step recipe:

Add about 3 tablespoons of shampoo to the bowl.
Squeeze a little paste into it and mix thoroughly.
Add a few drops of dye.
If the mixture turns out to be liquid, then add the same amount of toothpaste.
When the consistency suits you, then remove the container with the future slime in freezer for half an hour.
Then take the slime out of the freezer and start kneading it in your hands for 5 minutes.

The toy is ready! It is best to put it away after use in an airtight container. Over time, the slime will begin to dry out and will no longer be playable. Do not try to return the properties of the slime to him again, but rather make a new one.

Slime from paste and liquid dye

Alas, we came up with this recipe by accident. We saw a video on YouTube from a girl and tried to repeat with different tubes of paste, unfortunately, it did not work until we saw another video where a different paste was used. Sanino Anti Cavity. If you take another paste, then we cannot guarantee that it will work out.

The following recipe is also quite simple and requires a minimum of products.

Ingredients

Tube of toothpaste
liquid dye
Dishes and appliances for mixing

Let's start cooking:

In a dish, preferably glass, add the entire tube of toothpaste.
Add a small amount of dye to the paste and mix until smooth.
Place the slime bowl on water bath and heat for 15 minutes. Don't forget to stir the mixture.
The mass should dry out a little and thicken. Lubricate your hands with oil and take a slime.
Knead it until it becomes elastic.

That's all! Now you can play with it and even give it to small children. The strong minty smell may not be to your liking, and they probably won't taste it, so you can rest easy. You can use food coloring to make the toy more interesting.

Slime from paste and liquid soap

You can make a slime using paste and soap - the slime will turn out to be viscous and pleasant to the touch.

Here's what you'll need:

Liquid soap
Toothpaste
some flour
Any dye

Now let's start creating a toy:

Soap and toothpaste should be mixed in equal proportions. It's best to start adding little by little. So you can fully control the process and avoid mistakes.
If you have liquid coloring, then add it at this stage of cooking.
After that, start adding a little flour and stir the mixture continuously until the mass thickens.
If the dye is dry, then mix with flour, and later begin to introduce into the mixture, stirring constantly to avoid lumps.
Mix thoroughly again.
Add a teaspoon of water and start kneading the slime with your hands until it becomes gooey.

Here is such a slime you got. It is better to store in an airtight container to prevent the components from drying out ahead of time.

In order for the slime to turn out, you must carefully monitor the progress of the recipe. Do not change the ingredients according to your own preferences, otherwise you risk ruining the toy. Take your time and then you will definitely be able to make the slime right.

Remember that toothpaste slimes should be stored in containers with snap-on lids to form an airtight seal. This will help preserve the properties of the slime for a long time.

Carefully play with the slime, do not drop it or place it on fleecy surfaces, otherwise various particles of dirt and dust will fall on the toy, which will make it unsuitable for further use. In this case, it will be impossible to save the slime.

For decoration, you can use various decorative elements. It could be beads. small size, sequins and other embellishments. They will give the slime a more interesting texture and a beautiful look.

Conclusion

As it became clear, making a slime from toothpaste is not at all difficult. In addition, there are many other recipes containing toothpaste. In such an abundance, you will surely be able to find something of your own and make the slime the way you want it.

Many are interested in how to make a slime from glue and water from available materials one of the most popular children's toys. Let's talk about it in our article.

A huge number of different toys for children are invented every day. And these are not only dolls, teddy bears and other standard collections, but various slimes, bath fillers, which are made from unique materials.

What does a slime look like

This article will focus on slimes and their preparation at home. The problem is that not in every city you can find these products that children will really like. Today we're going to learn how to make a slime out of toothpaste and water and still match the one sold in the store.

In fact, slime is some kind of sticky substance that can penetrate into the most inaccessible places. It is sometimes used for cleaning various types keyboards, air ducts, that is, where it is impossible to reach in any way.

But we are talking about baby slime, which is completely safe for health and does not cause allergies. Many people wonder how to make a slime without glue, it is very difficult, but later we will analyze such methods. All methods are completely safe and can be done at home.

Multicolored slime

In the network today, this direction of production of various toys has become widespread. Many try to make a slime from improvised materials, but we will achieve our goal.

You can find a video on how to make slime with toothpaste and water to make it easier to follow our tips and tricks. The recipes used are quite simple and help you create whatever you want as quickly and efficiently as possible. Making a slime at home is a fascinating process that can interest not only a child, but also an adult.

Standard Recipe

Following the opinion of the manufacturers of these products, you can make sure that the toy is really safe.

At home, we use common products that do not cause allergies and do not have an unpleasant odor.

Thus, how to make a slime from toothpaste and water today, several fundamental recipes will be considered. The most common and well-known cooking option is the tetraborate method.

How to make a slime out of toothpaste

To get started, we need:

Sodium tetraborate
Dye
Plastic bag
Mixing containers

It is a 4% solution of sodium tetraborate that scares many away, but this is a fairly common product that can be found in a pharmacy. You can also ask for substitutes in the form of Borax powder.

Thus, it will not be difficult to find all the products, especially if you order all this via the Internet. Next, we proceed to the main preparation.

We take such an amount of glue, in accordance with the size of your future slime. That is, it will be enough to take about 100 grams, which we place in a prepared container. Mix thoroughly and add dye. You can use iodine or gouache.
We add sodium tetraborate, which completely changes the properties of the adhesive. It makes it less sticky and elastic. Just a few drops will be enough, or diluted according to the instructions. In order to obtain the appropriate adhesive density, water must be added gradually. After the resulting slime, we place it in a plastic bag.

In such a simple way it was possible to obtain unique toy which is very hard to find in stores. This is a truly unique entertainment option that both you and your children will enjoy.

Lizun from plasticine

Plasticine in their own way physical characteristics somewhat reminiscent of a slime, but it is more rigid. Therefore, you need to try to make it real slime that your kids will love. One of the simplest and most popular methods. Every child has probably already tried one of his school supplies make something like a slime.

How to make slime from plasticine

To get started, we need only three components:

Gelatin
Plasticine
warm water

Cooking starts with in a standard way dilute the gelatin and put it on fire. After the whole mixture has dissolved and the mass has become as it should, leave it to cool. Next, put the water on the fire already in another container (it will take about 50 milliliters).

After it starts to boil, put plasticine in hot water and stir until completely dissolved. Mix the resulting gelatin with this mixture and set to cool.

We get a viscous slime, which, of course, differs from the purchased one, but at the same time it very much resembles its properties. Now you know how to make a slime from toothpaste and water, without PVA glue and tetraborate, which the child will really like.

Pink slime

The problem with this version of the toy is that it will not last for a long time, a maximum of several days, after which it must be disposed of immediately.

Slime from starch

For many purchase store slime the easiest option. But you need to understand that it does not serve long time, from just a few days to two weeks. Therefore, it would be nice to have a method that would allow you to do it every day with minimal cost. Recently, a large number of suitable recipes have begun to appear on the Internet that can really help.

Now we know how to make a slime from toothpaste and water without PVA glue. Next, consider a more laborious, but effective method. As you know, starch is a natural substance obtained from various vegetables and cereals. Most of all we know corn and potato starch. In our case, any will do.

How to make slime from starch

For this recipe you will need:

About 100 grams of starch
Dishes
PVA glue in the ratio 1:1 to starch
warm water
Dye and plastic bag

We dilute starch in water, gradually stirring it until a homogeneous mass. Let the mixture settle, you can immediately add the dye so that it takes on a natural color.

Next, pour the resulting mixture into a plastic bag and mix it with PVA glue. This is done very simply. As a result, we get great option slime that you can use for a long time.

How to make slime without glue

In fact, it is impossible to answer the question of how to make a slime from toothpaste and water without PVA glue and sodium tetraborate, since each individual component is included in many recipes. You will need to spend a considerable amount of time, but you can get exactly the result that you dreamed of.

How to make slime without glue

To implement the method, you will need:

Polyvinyl alcohol
Sodium tetraborate
Dishes
Gauze
Dye of any type

To implement this recipe, you need to consider several factors. The size of your future slime will be how much alcohol and sodium borate you take and dilute them in water.

Therefore, you do not need to take too much powder. Next, we proceed to the implementation of the task.

To start, pour warm water into a bowl and dilute polyvinyl alcohol in it. This must be done carefully so that all the powder is evenly dissolved. It must be diluted in accordance with the concentrations indicated on the package.
We put the resulting liquid on fire and boil, stirring constantly. A precipitate will form, which should not settle on the bottom, as it may burn. You need to boil the liquid for at least half an hour better than 40 minutes. Let's cool down.
Next, proceed to the preparation of a solution of sodium tetraborate. We take two tablespoons of the powder in a small glass of water. The advantage is that the crystals will dissolve in as much size as is sufficient. After that, we filter the water and remove the remaining powder.
Now we mix everything in the ratio of 75% alcohol solution and 25% tetraborate. Add some dye to color the toy.

We get a unique slime with the best physical properties. The toy can last about a week. The problem of implementing this method is that not everyone wants to search for alcohol or sodium tetraborate, so you are offered simpler, but at the same time popular methods.

To correctly perform all the recipes presented, you must first familiarize yourself with them.

Doing everything better without children, as a large number chemical reagents not a place to play.

Categories

Popular