Magicar 9 car alarm operating instructions. Sherkhan alarm - a detailed overview, operating instructions. We connect to the CAN bus and to the crawler

Car security system with two-way communication and automatic engine start Elite two-way car security system SCHER-KHAN MAGICAR 9 with automatic engine start. It has the function of connecting to the car's CAN bus for reading and transmitting data.

SCHER-KHAN MAGICAR 9, thanks to the application modern solutions simplifies complex installation procedures security system on the car: there is no need to look for signals from various electronic devices throughout the car, the number of connecting wires is minimized, the alarm can be installed in the most difficult and hard-to-reach areas of the car, which significantly increases the anti-theft properties of the security system due to the possibility of its installation as discreetly as possible.

The car alarm is equipped with a multifunctional four-button key fob-communicator with an LCD display, on the large screen of which all the necessary data about the state of the protected car is displayed. The control panel provides two-way communication with a car at a distance of up to 2,000 m. The slightest threat and information is sent to the key fob indicating the cause of the alarm. The keychain reminds the owner of missed messages visually, with the help of unique sound signals, as well as through a vibrating alert.

Specifications

Keychain communicator

• Multifunctional 4-button keychain communicator with liquid crystal display
• Displaying information on the LCD screen

• Protection against interception of MAGIC CODE™ PRO 2 coded packets
• Separate channels for arming and disarming
• Additional confirmation code for disarming
• Audiovisual confirmation of executed commands
• Vibrating bell
• Long distance communication up to 2000 m s processing unit
• Low battery indication
• Voltage indication battery car
• Indication of temperature in the passenger compartment
• Current time indication
• Remote automatic start of the engine with indication of operating time accurate to the second
• Sound and visual reminder modes about receiving an alarm message
• Economical food (one AAA element).

Processing unit

1. Automatic engine start of cars with automatic or mechanical box timed broadcasts (every 2 or 24 hours); on command from the key fob; by command from an external device; upon reaching a temperature of -15; -25; +60 °С; on the discharge of the car battery below 11.5 V
2. Ability to connect to the car's CAN bus for reading and transmitting data
3. Opportunity to work in SLAVE mode(system control via the car's standard key fob) when connected to the CAN data bus
4. Control of engine operation using the voltage level sensor of the on-board network, generator sensor, tachometric signal sensor
5. Ability to set the exact start time of the engine
6. Personal code for access to the car interior if the key is lost
7. Accounting for the delay in turning off the cabin light (three modes)
8. Tamper protection additional key fobs
9. Power outputs for controlling the car's central lock and trunk lock
10. Alarm control power output (two circuits) with separate power circuit
11. Auto arming (programmable function)
12. Automatic return to armed mode if the door was not opened
13. Armed mode without siren signals
14. Covert security (the ability to transmit alarm signals only to the key fob) stop / disarm without siren signals
15. Electronic current protection of all low current outputs
16. Programming the type of interlock relay (NC or NO)
17. Event programming to enable two additional channels
18. "Turbotimer" function - ignition off delay from 1 to 6 minutes.
19. Engine running guard
20. Locking and unlocking the door locks when the ignition is turned on and off
21. Programming the number of pulses for locking and unlocking the central lock
22. Programming the central locking algorithm for controlling the "Comfort" function (closing the electric sunroof, power windows)
23. PANIC or JackStop™ mode
24. HANDS FREE function for automatic arming/disarming
25. Parking light warning
26. Immobilizer mode
27. Service mode VALET

DOWNLOAD INSTRUCTIONS SCHER-KHAN MAGICAR 9

Scher-Khan Magicar 9 User Manual

DISARMING THE SYSTEM WITHOUT A KEYFOB
USING PIN 1
If you want to use a personal code to remove the system Scher-Khan Magicar 9 disarmed if there is no keyfob, new keyfobs codes are written, two-step disarming mode is used, then the personal code PIN 1, consisting of four or two digits, must be entered into the system (determined by programmable function 1-6, see pages 72, 79 ). The value of each digit of the code can vary from 1 to 4. Thus, the code can have a value from 1111 to 4444 or from 11 to 44. The code is entered using the multifunction button on the call sensor body.

Recording personal code PIN 1:
1) Disarm the Scher-Khan Magicar 9 system
2) Open the door and leave it open
3) Turn on the ignition. The engine does not need to be started
4) To enter the personal code recording mode, simultaneously press and hold for 2 seconds. buttons (III + IV) of the key fob. Scher-Khan system The Magicar 9 will acknowledge entering programming mode with one siren and one alarm flash. If you heard three siren sounds and three alarm flashes, it means that the system has not entered the programming mode. The Scher-Khan Magicar 9 system will not enter programming mode if it is armed, the ignition is off, or the doors are closed
5) To enter the first digit of the code within 4 seconds. briefly press one of the keyfob buttons. The number of the pressed button will then correspond to the first digit of the personal code. The system will confirm the selected digit with the corresponding number of siren sounds and alarm flashes
6) To enter the second digit of the code within 4 seconds. briefly press one of the keyfob buttons. The number of the pressed button will then correspond to the second digit of the personal code. The Scher-Khan Magicar 9 system will confirm the selected number with the corresponding number of siren sounds and alarm flashes
7) To enter the third digit of the code (when using a four-digit code) within 4 seconds. briefly press one of the keyfob buttons. Number
pressed button will correspond to the third digit of the personal code. The system will confirm the selected number with the corresponding quantity
siren signals and alarm flashes
8) To enter the fourth digit of the code (when using a four-digit code) within 4 seconds. briefly press one of the keyfob buttons. The number of the pressed button will then correspond to the fourth digit of the personal code. The system will confirm the selected digit with the corresponding number of siren sounds and alarm flashes
9) After entering the second (fourth) digit of the personal code, the system will exit the programming mode. To confirm the exit from the programming mode, the system will give two siren and alarm signals.
The presence of siren signals is determined by the value of the programmable function 1-4 (see pages 72, 77) and the combination of buttons (I + II) (see "Disabling siren signals" on page 39).

To start the car engine remotely, you need to press on the main key fob Scher Khan Magicar 9, button 2 and hold it for 2 seconds or more. The security mode is activated, the locks on the doors will close and the engine will start. At the same time, smoke and a countdown will appear on the keyfob-communicator display, showing how much the engine has left to run before automatic shutdown. Therefore, first you need to set the desired duration of the engine (5, 15, 25 or 45 minutes). To pre-set the motor operation time, you need to enter the menu by simultaneously pressing buttons 1 and 4, and then set the duration of operation.

• If you want the engine to run in autostart mode for only 5 minutes and then turn off, then press button 1;
• if 15 min. – button 2;
• if 25 min. – button 3,
• if 45 min. – button 4.

You can turn off the engine from the Sherkhan Magikar 9 alarm key fob in the same way as we start the engine - that is, by long pressing button 2, the engine will turn off.

How to put a car on autostart

In order to activate autorun at a certain time, you need to turn on the timer, this is done by simultaneously and quickly pressing buttons 2 and 4. If the timer function is activated, the word "timer" should appear.

After turning on the timer, you need to decide on the autorun interval - that is, after what time it should turn on, and here you can choose 1 of 4 options:

1. Autostart will be triggered every 2 hours;

2. Autostart will be triggered every 4 hours;

3. Autostart will be triggered every 8 hours;

4. Autostart will work once a day, at the appointed time.

Timer Autostart Programming Table

As in other modern car alarms, in Sherkhan Magikar 9, you can set autostart by voltage in the on-board network or by temperature. To do this, enter the menu by simultaneously pressing buttons 1 and 4, and then select the desired temperature.

How to disable autoplay on Scher Khan Magicar 9

This is done by turning off the timer mode, i.e. by simultaneously pressing buttons 2 and 4. If autorun was successfully turned off, this will be confirmed:

• two sirens,
• "emergency" flashes 2 times, blinks led indicator,
• on the key fob display, the headlights and the lock symbol will flash 5 times, and the timer symbol will disappear,
• the key fob will emit 2 beeps.

Why doesn't autoplay work?

Possible reasons for autorun failure are shown in the table below:

Sometimes the display shows opened door and error 03. In this case, a faulty door limit switch interferes with the normal operation of the autorun, therefore, repair is necessary in a car service.

The anti-theft system Sherkhan Magikar 9 installed on the car allows you to start the engine remotely thanks to the function auto start. The alarm is designed for cars with a CAN bus.

[ Hide ]

Alarm Scher-Khan Magicar 9

"Signalka" for a car Sherkhan Magikar 9 has a function feedback, thanks to which the consumer has the ability to monitor the vehicle.

Equipment

Description of the parts included in the package:

• service user manual;
• microprocessor control unit for car alarms;
• a communicator with a display with which the feedback option is implemented;
• spare remote control without screen and alert function;
• shock and sensitivity sensor with cable and connector for connection;
• controller for calling the owner of the car from the passenger compartment;
• transceiver module;
• temperature sensor, according to the readings of which the engine will turn on;
• relay blocking the power unit of the car with a connector and wire;
• siren;
• limit switch for installation on the hood or tailgate;
• three six-pin connectors with wires and safety elements;
• 11-pin block for connection to the control unit;
• six-wire cable for connecting the transceiver module;
• 2-wire electrical circuit for connecting additional channels;
• four-wire cable for connection to the digital interface;
• double-sided adhesive tape for mounting the car owner's call sensor and the transceiver module.

The alarm package includes one limit switch for the hood or trunk, the rest of the devices for door locks Need to buy separately before installation.

Delivery set Sherkhan Magikar 9

Specifications

Features this model has:

• use of an additional password to disable protection;
• notification of the user in three types alarms- from the siren, from the optical devices of the car, as well as from the key fob;
• the possibility of protection against illegal binding of other communicators;
• data transfer between devices is carried out over a frequency channel at 433 MHz;
• the protection mode can be controlled automatically, in accordance with the signals received from the controllers;
• to protect the elements anti-theft system are used safety devices, diode components, transistors, varistors, resistors;
• nutrition security complex carried out from the mains with a voltage of 9-18 volts;
• the amount of current that the control module consumes in protection mode is from 30 to 40 mA;
• weight of the microprocessor unit - 280 g;
• performance of all functions is possible at air temperature from -40 to +85 degrees;
• the main communicator uses AAA class power supplies, the additional communicator uses CR2025 power supplies;
• the average battery life in the main remote control is about four months, in the additional one - up to three years;
• The signal is transmitted over a distance of up to 2 km.

A feature of the Sherkhan Magikar 9 alarm system is the presence of a special Magic Code Pro2 encoding to protect transmitted impulses. The developers have implemented a new encryption algorithm, thanks to which the speed of data encryption and decryption has increased.

Main functions

Options that the anti-theft system has:

1. Security mode when the power unit is running.
2. The "Turbo" function, which allows you to maintain the operation of the car's engine and reduces the rapid wear of turbocharged engines. It can be configured to operate for a certain period of time: from 1 to 4 minutes.
3. Option " Free hands". It allows the user to customize automatic switch on and disabling security mode.
4. Panic function. It allows you to turn on the alarm command with sound and visual accompaniment.
5. "Pit stop". This function makes it possible to activate the security mode on a car with a running engine in the absence of a key in the ignition switch.
6. The "Slave" function, which allows you to use the alarm system using a key fob from a standard central lock.
7. Hidden protection. When this option is enabled, when the alarm mode is triggered, information about this will be sent only to the owner's communicator. Siren does not turn on.
8. vehicle by time or temperature. Also, the user can start the power unit by sending a command from the communicator.
9. The alarm has a personal password designed to emergency shutdown protection mode.
10. Option to delay turning off the lights in the car.
11. Monitoring the engine start according to the readings of the generator, tachometer or battery.
12. Two-stage disabling of protection mode.
13. Option to automatically open and close door locks when the ignition is turned off and on.

An overview of some of the functions of the anti-theft system is shown in the video filmed by the AvtoGSM channel.

Advantages and disadvantages

Advantages of the security system:

1. Feedback. Implementation of this option is possible only if the communicator is located within the operating radius of the system. The keyfob display shows information about the state of protection, included protective zones, air temperature, time.
2. Reliable protection of the protected object from hacking. The model implements proprietary technologies that prevent the possibility of intercepting transmitted codes.
3. Great functionality. Many useful options allow the user to customize the operation of the anti-theft complex in accordance with their needs.
4. Service documentation includes detailed guide on system installation, it will allow you to correctly install and configure the device in accordance with the requirements.

Cons specific to this model:

1. According to car owners, the Slave option is useless. If the turbo timer is running, the engine remains running, the buttons on the door handles will not function. Accordingly, locking the locks will not work. The consumer will have to use the remote to close.
2. The large size of the communicator for management. This disadvantage is usually noted by consumers who are accustomed to using label keys.
3. To enable the turbo timer function or auto start of the engine, you must first activate the parking brake.

How to install a Scher-Khan Magicar 9 alarm?

To proceed with the installation of the Sherkhan Magikar 9 alarm, you must:

• prepare tools and supplies;
• unpack the device;
• print wiring diagrams.

Tools and materials for installation

Before installation, you will need to prepare:

• screwdriwer set;
• set of wrenches;
• stationery knife;
• soldering iron with solder;
• heat shrink tubing;
• insulating tape;
• plastic clamps.

Wiring diagram

Keyfob buttons Sherkhan Magikar 9

Key fob setting

Programming of all alarm parameters of Scher-Khan Magicar 9 is performed only after binding the communicator.

To configure, the following steps are performed:

1. The ignition is turned on in the car, the engine must be turned off. The car owner call button on the transceiver body is pressed for 2 seconds, while parking lights cars blink.
2. Within the next five seconds, the call button is pressed again. If a pin code is not required to enter the bind mode, then the turning lights of the car will blink twice. In the presence of a password, the blinking of the optics will be single.
3. If a pin code is used, then you must enter its value. Once entered correctly, the vehicle headlights will blink twice.
4. After five seconds, the alarm status light will flash blue. This indicates the readiness of the anti-theft complex for binding.
5. Within the next five seconds, you must press the first button of the communicator. If the device is successfully paired, the side lights of the car will flash once. These steps are repeated for the replacement remote.
6. To exit the setup menu, do nothing for 4 seconds.

Key fob programming

The procedure for setting options is as follows:

1. The first and third keys of the communicator are pressed simultaneously. The “Pt o9” indicator should appear on the device screen, the key fob will play one signal.
2. After entering the settings menu, select necessary function. To change the clock parameters, the first button is pressed, to change the minutes - the second.
3. The fourth key is used to enter the alarm settings menu. Change of parameters is carried out by the first and second buttons. Turning this function on or off is done with the fourth key.
4. At the next “click” on the button 4, the communicator will enter the menu for switching off and on the function of calling the owner of the car. Your device will display a handset icon on the display. To enable or disable the option, the first button is used.
5. Pressing the fourth key again, you can enter the menu for activating and deactivating the communicator's vibration mode. Once selected, the corresponding indicator and function status information will be displayed on the device screen. To disable or enable it, use button 1.
6. The next pressing of the fourth key will allow you to enter the engine temperature display mode. Depending on the setting, the information will be displayed in degrees Fahrenheit or Celsius.
7. The fourth button is used to change the display format of the current time. An icon corresponding to the format used will appear on the device screen. Key 1 is used to change it.
8. The next "click" on the fourth button will enable or disable the battery saving mode. The keyfob screen should display an indicator in the form of a battery, which determines the status of the function. The first button is used to change settings.
9. After adjusting all the parameters, exit the function programming menu. To do this, simultaneously hold down the first and third keys on the key fob.

User Viktor Tokarev spoke about the features of the Sherkhan Magikar 9 firmware.

Autorun settings

The consumer has the ability to start the engine remotely, provided that the contacts in the ignition switch have been correctly connected. Before setting this function, you must move the transmission lever to the neutral gear position (or the parking mode for automatic transmission - automatic box). You should also adjust the parameters of electrical equipment - climate systems, electric mirrors, etc. To remotely start the power unit on command, you need to hold down the second button of the communicator for two seconds.

Autostart by timer

Enabling and disabling this option is done by simultaneously pressing the second and fourth keys. If the function is activated, an indicator with the inscription "Timer" will appear on the keyfob screen.

The setup procedure is as follows:

1. Enter the option programming mode, for this, buttons 1 and 3 are pressed. They must be held for two seconds.
2. Then the start time is set. The first button changes the hours, and the second - minutes.
3. To leave the setup menu, you need to hold down the first and third buttons for two seconds.

How to disable autoplay?

If the motor was started on command, then similar actions are performed to turn off the unit - the second button is clamped for two seconds. To turn off the timer start, press keys 2 and 4 at the same time.

What are the reasons why autoplay doesn't work?

If the system malfunctions and the function does not work, you can find out about this by holding the second button on the remote control for two seconds. An indicator with an error code will be displayed on the communicator screen, by deciphering which, you can find out the cause of the problem. if the launch fails, it should work three times.

Reasons why the car engine does not start:

Possible alarm malfunctions

Problems that may occur in the operation of the Sherhan system:

1. The system does not work due to a malfunction of the key fob. The remote control may fail as a result of battery discharge, then the power supply must be replaced. A concomitant symptom of this problem will be a decrease in the range of the remote control, as well as a lack of response to commands. Perhaps the reason is damage to the communicator, dirt or moisture getting inside. To solve the problem, you will need to disassemble the device and check the board - clean it and, if necessary, restore the operation of the buttons and contacts.
2. The alarm does not work due to incorrect installation or damaged wires. All elements of the security complex must be located in accordance with specified requirements. Placing the transceiver module near electronic equipment will result in minimal signal reception. It is necessary to check the integrity of all wires and replace damaged electrical circuits if necessary.
3. An alarm triggering for no reason may be due to an incorrect shock controller sensitivity setting. It is necessary to change this parameter using special adjustments on the device case. It is necessary to make sure that the regulator is installed correctly and securely fixed in its seat.
4. Incorrect operation of the system due to a malfunction of the control unit. A detailed check of all the blocks with which the module is connected, as well as contact elements, is required. Oxidized connectors must be cleaned, and damaged ones must be replaced. If the problem is moisture on the block, then the device must be dried.
5. The engine is blocked arbitrarily, it may not be unlocked. This problem is usually caused by a conflict between the standard immobilizer and the alarm blocker. To fix the problem, you must either disable the immo, or additionally install a bypass module.

Download Scher-Khan Magicar 9 installation and operating instructions for free in PDF format

You can download service manuals for installation and use of the security complex using the links:

How much does the Scher-Khan Magicar 9 alarm cost?

Approximate prices for the purchase of a security system:

Video

Channel "AutoGSM" showed how it works anti-theft complex Sherkhan Magikar 9 after installation.

Each alarm key fob has its own individual code. Often a situation arises when you need to configure and register the remote remote control. You can do programming the Sherkhan 9 key fob yourself, without contacting specialists. This process is detailed in the user manual. The alarm system's memory can store three key fobs.

Setting up and linking a new key fob to the alarm

Connecting an additional remote control is carried out according to the following scheme.

1. Disarm the car.
2. Turn the ignition key to the "On" position, but do not start the vehicle. Hold down the Call Driver button for two seconds. "Emergency" flashes once.
3. Within five seconds, click the "Call the driver" button. Lighting flash once - a PIN code has been applied. The alarm will flash twice - no secret password is being used.
4. If the PIN code is not required, then after five seconds the LED indicator will turn blue, signaling the possibility of recording key fobs.
5. Within five seconds, press button 1 on the first remote control once. An alarm flash will follow. The main key fob is recorded.
6. If necessary, write the following pagers in the same way.
7. After entering the data of the third remote control, the alarm will light up twice, the system will automatically exit the programming mode.

Instructions on how to program the Sherkhan 9 Pro 2 remote control

To bind the Pro 2 key fob, follow these steps.

1. Remove the car from protection. Turn on the ignition. Press the button on the call sensor body for two seconds. Actions will be confirmed by a single flash of the turn signals.
2. For five sec. press the call button once. "Emergency" will light up once - the PIN code is used. The alarm will blink twice - the password is not applied.
3. If the PIN code is used, then within four seconds after the "Emergency gang" works, enter the first digit of the code. To do this, press the call key so many times that it matches the first value secret code. Wait four seconds. The hazard warning light will flash once to indicate correct operation.
4. Using the same algorithm, enter the remaining numbers of the PIN code. The second and fourth digits are confirmed by a double alarm. The third - a single flash of light devices.
5. After 5 seconds after entering the secret code, the LED indicator will turn blue.
6. For five sec. press key 1 of the first Scher-Khan Pro2 remote control once. "Emergency" flashes once. Next, hold down key 1 of the second, third key fob. After registration of the third pager lighting fixtures will light up twice, the system will automatically exit the programming mode.
7. When new switches are entered into the memory, the old ones are automatically deleted from it.

Firmware and reprogramming

You need to flash the key fob without using the secret code according to the following scheme.

1. Turn the key in the ignition switch to the "On" position. Hold down the key on the owner call sensor for two seconds. A single flash of alarm will follow.
2. Press the call key again. This must be done within 5 seconds. The hazard lights will flash twice.
3. Within five seconds, perform the following action: press button 1 of the first remote control. Wait for the emergency lights to flash.
4. With an interval of five seconds, reprogram the remaining key fobs. After entering the third remote control, the lights will blink twice. The system will automatically exit the setup mode. Keyfob registration is completed.

Not programmed: reasons

The remote control began to work incorrectly. You decided to reprogram it yourself. Before doing this, do a few simple steps.

1. Find the instructions for the anti-theft system installed on your car.
2. Study the order carefully.
3. If there is no documentation, then try to find information on the Internet.

You have done all the steps according to the instruction manual, but the key fob does not work. It is not possible to flash the pager for the reason:

• damage to the communicator;
• accidental inclusion of the "Jack" mode;
• failure of the control module.

Activating autorun from the remote

You can set up the engine start using the following instructions.

1. On the key fob with auto start, hold down key 2 for two seconds. The car will arm and the engine will start.
2. The switch screen will display the smoke symbol and the engine timer. Therefore, the first step is to set the duration of its warm-up.
3. Enter the menu by simultaneously pressing buttons 1 and 4. The engine can be started according to the following scheme: work 5 minutes - button 1, 15 minutes. – 2, 25 min. – 3, 45 min. - 4.
4. Stop the motor - long press on the key 2.

We looked at how to start a car from a key fob. There is nothing difficult in this process, follow the instructions clearly.