Alarm pandora 1870 instruction manual. Repair and service of cars, engines and automatic transmissions. User manual

According to the user manual, the Pandora 1870i is a premium anti-theft system equipped with a radio transmitter and having the ability to program functions via a personal computer. The alarm is configured via a USB cable using the latest software version - Pandora Loader with Russian-language firmware.

[ Hide ]

Table: technical characteristics of the car alarm Pandora model Deluxe version mod 1870 i

Parameter name	Meaning
Current consumption in active security mode	35 mA or less
Base unit supply voltage	9 to 15 V
Data link operating frequency	433.075 to 434.79 MHz
Number of main independent channels	8 pieces
Radiation power of the spare key fob	no more than 10 mW
Permissible temperature range of operation of the device	from -40°С to +85°С
Main remote code type	Dynamic Dialogue
A kind of coding for an additional key fob	Similarly
Announcement channel encoding type	dynamic original
Maximum load current switched by output	siren - 3 A; light signaling - 7.5 + 7.5 A; door locks - 15 A; timer channel 1 - 15 A; timer channel 2 - 0.5 A; timer channel 3 - 0.3 A; timer channel 4 - 1 A; timer channel 5 - 0.3 A; ignition support relay - 20 (30) A; starter relay - 20 (30) A; ACC relay - 20 (30) A.
Number of buttons on the key fob	3
Key fob range with LCD	at least 300 m
Range of receiving notifications on a key fob with LCD	at least 1000 m
Remote control range	50 m
Shock/tilt/motion sensor	Two-level, built-in (implemented on an integrated accelerometer)
System component dimensions	base unit - 105x77x29 mm; keychain with LCD - 73x34x16.5 mm; additional keychain - 47x32x10 mm; RF module - 84x43x15 mm; packaging - 275x195x70 mm.
Safety devices	Yes
Short circuit protection shorts to ground	Yes
surge protection surge	Yes
circuit protection against polarity reversal	Yes
Main remote battery type	CR2450, 3V
Spare key fob battery	CR2032, 3V
Weight with packaging	1.35 kg

Equipment

The basic package of the Pandora Deluxe 1870i signaling includes the following components:

main alarm control unit;
RF module with cable;
main console remote control with liquid crystal display;
additional keychain with three buttons;
main cable;
wire of the central lock;
relay module cable (optional);
engine and cabin temperature sensors with wire (optional);
cable with a three-color indicator LED for system status;
wire with service;
lock relay cable;
TM-key contactor connector with wire (optional);
limit switch;
additional sensor connector with wire (optional);
trailer cable;
self-tapping screw with a diameter of 4.2 mm - 13 pcs;
plastic screed with a length of 12 to 15 mm;
ground contact;
user manual for system operation;
step by step installation instructions;
wiring diagram;
short (pocket) user manual.

In the photo - the main unit, additional and spare alarm key fobs Pandora Deluxe 1870i

Video: overview of the Pandora Deluxe 1870i security complex

Filmed by the channel "Autoelectro. ua".

Key Features

Pandora Deluxe 1870i Main Key Fob Features:

Activation and deactivation car alarm done with different buttons. The user can turn on and off the security system with one click, without using and remembering key combinations.
Vibration alert function. When the sound of the key fob is turned off, notifications are accompanied by a vibration response of the device.
16 options sound signals. Each notification melody corresponds to a certain type of event.
Turn the display backlight on and off in automatic mode. The screen is illuminated in alarm mode or in case of triggering of "limit switches".
Low battery alert. Informing the car owner about the need to replace the battery.
Display the current time.
Vehicle battery surge alert.
Cursor method of interaction with the menu of the main key fob.
Register of ten recent changes state of the system with the registration of the time of the event.
Autostart and autostop of the internal combustion engine (internal combustion engine) at a predetermined time and set temperature.
Notification of leaving the radio coverage area. If there is no connection to the security system, a short beep sounds. After the connection is restored, the data on the state of the complex is updated on the remote control and the user receives information about all events that occurred during the exit from the zone.

Functionality of the main unit anti-theft system:

Separate connectors for connecting the "limit switches" of the engine and luggage compartments with an optional choice of polarity.
Power supply voltage regulation. Allows the system to adapt to the type of wiring of various vehicles.
Adaptive algorithms for processing signals from sensors. This option allows you to minimize false alarms by analyzing data from all sensors simultaneously.
Connection of additional sensors is available. It is possible to connect a brake pedal sensor and glass damage.
Ignition system support mode.
Reducing the temperature of the engine of turbocharged cars through the "Turbo-timer" mode.
Five timer channels with a flexible algorithm for configuring switching on and off based on system events. Provides the ability to control additional electrical appliances, such as interior lighting or window closers.
An individual 80-bit cipher that is set for each device and can be changed by the user.
Possibility of flexible organization of interlocks using timer channels of both NC and NO relay contacts.
Support for "Touch Memory" and "iButton" keys. The devices perform the function of an immobilizer and provide quick programming of the main functions of the system.
Guard mode with the engine running.
The function of delayed activation of the anti-theft system.
Tricolor status indicator.
Accurate (up to 1 tenth of a degree) temperature measurement of the engine and car interior.
Possibility of programming up to four bilateral control panels.

The main security functions of the system:

Panic feature. Activate the siren and light signals car, which prevents theft of the vehicle, scaring off the intruder and drawing the attention of others to him.
immobilizer mode. Provides additional blocking of the engine and increases safety of the car.
Valet function. Allows you to put the car's anti-theft system into maintenance mode, temporarily turning off the car alarm. This ensures unhindered interaction with the vehicle's electrics during the auto repair process. The function is controlled remotely (from the key fob) without the need to interact with the Jack button in the car.
Anti Hi Jack mode (active and passive). Prevents vehicle theft in progress robbery by locking the car doors or permanently deactivating engine operation.

Advantages and disadvantages

Advantages of the Pandora Deluxe 1870i alarm system:

Dialogue coding of signals. The function provides protection of a multi-channel connection from hacking by code grabbers.
Bidirectional communication. Allows you to learn in a timely manner about the operation of the alarm mode and other events related to the operation of the alarm.
Auto start engine. Carries out preliminary warming up of the engine without participation of the car owner.

Disadvantages of the alarm, which are described in customer reviews:

in basic configuration the anti-theft system lacks temperature sensors and cables for connection, the user needs to buy them separately;
the body of the main key fob is short-lived and subject to mechanical damage during operation;
despite the adaptive technology for reading sensor signals, the system is not protected from false alarms;
on the Russian market it is difficult to find a suitable case for the key fob, since the manufacturer does not produce it.

Car alarm installation

General installation requirements security complex:

the main signaling unit and the RF module may only be installed inside the vehicle interior;
components should be properly fixed anti-theft complex, since vibration effects and temperature changes can destroy unreliable fasteners and lead to device failure;
before installing the alarm or its maintenance, it is necessary to remove the negative terminal from the car battery;
turn on the connectors of the security system only after completing its installation;
the connection of wires is carried out by twisting or by soldering the ends with lead-tin solder;
all exposed metal parts of the wires must be insulated with tape or heat shrink tube;
cables cannot be connected different material and the size of the section between themselves without the use of a part equalizing the electrochemical potential (a metal washer or a piece of wire);
the junction should be raised as high as possible above the laying of the switched wiring, this eliminates the possibility of condensate draining and damage to the insulation;
when laying the cable, its excessive tension or excessive sagging is not allowed;
those places where it is impossible to exclude the friction of the wiring against the body elements should be additionally protected with a heat shrink tube to avoid breaking the insulating layer;
all terminals not used when installing the alarm should be shortened and tightly wrapped with insulating tape to prevent them from touching the car body and other conductors.

Security measures

Safety requirements specified in the Pandora Deluxe 1870i alarm installation instructions:

connection of the security complex is allowed only to electrical wiring with a nominal voltage of 12 V;
all safety devices specified in the instructions must be used;
electrical circuits that are not powered through the main alarm unit are subject to additional protection fuses;
before installing the anti-theft system, check the integrity of the output cables;
components of the security complex must not be exposed to high temperatures and moisture, and it is also necessary to minimize the likelihood of their mechanical damage during operation.

Table: order of connection of security system components

Security system component	Installation order
base unit	The device is mounted inside the car next to the instrument panel. The block is fixed with screws, double sided tape or plastic ties (included). The plane on which the device is installed must be parallel to the direction of travel of the vehicle. A different mounting area of the unit is also allowed, but in this case the device may not work correctly.
Transceiver unit (RF module)	The block is placed on the windshield of the car at a distance of at least 1 meter from the metal elements of the interior. From top edge glass surface it is necessary to retreat 2-2.5 centimeters, mounting the device on a foamed double-sided adhesive tape. When laying the cable from the module to the main unit, mechanical damage to the insulating layer of the wire should be prevented.
Status indicator	The LED is mounted in places accessible for visual control by the user both inside and outside the car. The indicator can be removed from the housing and mounted through a pre-drilled hole anywhere in the plastic console of the vehicle. The recommended diameter is no more than 5 millimeters. The gap around the diode should be sealed with rubber-based adhesive.
Valet Button	This device is mounted inside the car in the most hidden place from strangers, but accessible and convenient for the car owner. It should be taken into account that while interacting with the Valet key, the user must follow the signals of the LED indicator.
Interior temperature sensor	The temperature sensor is installed in a shaded part of the cabin, away from sun rays and air flow from the air conditioner or heating system. If the vehicle has its own temperature sensor, the device should be mounted next to it.
Engine temperature sensor	The internal combustion engine temperature sensor is mounted on the cylinder head or on metal elements engine cooling unit. It is necessary to ensure that the exhaust gases do not interfere with the operation of the sensor and do not lead to its breakdown. The sensor mounting location should be insulated against heat loss with polyurethane foam or cork material.
Key contactor "TM" (iButton)	To install the device, any part of the cabin, located in close proximity to the driver, is suitable. The contactor is mounted on double-sided tape.
Siren	The sound device is installed in the engine compartment away from high-temperature mechanisms. When connected, the current supplied to the device must not exceed 3A. If this value is higher than normal, you need to connect the siren through an external relay.
Light signaling	To connect the light signaling, pins 13 and 14 of connector X8 of the base block. The maximum current for each of the channels should not exceed 7.5 A. Channel power supply light signaling is carried out separately from the base unit through the 12th contact of that same connector, a 15A fuse is installed in the circuit.
Limit switches	The "limit switches" of the car doors should be connected in parallel. Poll polarity hood and trunk limit switches can be changed if necessary by means of system programming.

Wiring diagrams for Pandora Deluxe components

When installing the anti-theft complex, it is necessary to take into account the admissible currents switching, as well as the polarity of inputs and outputs.

Designation of buttons and light indicators of the main and additional key fobs

Table: LED indication meaning

Icons on the display of the main key fob

Pictograms on the display of the main key fob

Meaning of the icons on the remote control screen:

Communication status/indication of command transmission progress.
Charging the galvanic element of the control panel.
Scoreboard for displaying numerical values (alarm time, timer, temperature) and names of autorun modes.
Enable/disable security mode.
Indication of automatic activation of protection.
Driver call.
Turn on the ignition system.
Brake pedal sensor triggered or handbrake lever not raised warning.
Low car battery indicator.
Activation of motion sensor and/or vehicle tilt sensor.
Operation indication shock sensor.
The vehicle's side lights are on.
Hood limit switch open.
Luggage compartment open indicator.
The car doors are open.
Indication of enabling / disabling siren signals.
Deactivation of sound notifications of the key fob.
Update information about the state of the car.
Valet mode activated.
Vehicle Finder enabled
"Anti-robbery" mode is activated.
Started engine indication.
Automatic start by temperature, timer or alarm is activated.
The opening of the luggage compartment at a predetermined time is included.
Timed channel #2 is activated.
Timed channel #3 and #4 are enabled.
The timer and/or alarm time has been set.

Key fob programming

Keyfob Programming Procedures:

Enter setting level 1.
On the remote control, which should be written to the system memory, you need to hold down all 3 keys at the same time until a beep sounds.
Repeat the action with all key fobs to be linked to the system (the total number is no more than four devices).
To exit the setup mode, press the service button.
Activate and deactivate the ignition.

You can check the number of registered key fobs in the system by removing and putting back the battery terminal. The siren will sound as many times as there are remote controls connected to the Pandora Deluxe 1870i alarm at the time.

autorun

Setting automatic engine start is done like this:

Short "clicks" on key 3 to select the icon with the inscription "Start".
Press button 1 and go to the programming level.
Use the 3 key to select the sublevel of the timed autostart function.
Activate or deactivate the mode using buttons 1 and 2 respectively.
Click on button 3.
Use keys 1 and 2 to set the autorun response time.
By “clicking” on button 3, go to the setting of automatic activation of the engine operation based on its temperature.
Turn the mode on or off using keys 1 and 2 respectively.
Press button 3.
Use keys 1 and 2 to set the start temperature.
Using button 3, select the sublevel of the function of automatic warming up of the internal combustion engine.
Use keys 1 and 2 to adjust the duration of the engine on.
Click on button 3.
Turn on or turn off the warm-up mode using keys 1 and 2 respectively.
To save the settings, press button 3 until “Send” appears.
“Click” on key 1, after which the buzzer will sound 2 times, confirming the successful operation.

Security functions

Security functions are managed as follows:

"Panic". It is activated by simultaneously pressing buttons 1 and 2. Deactivation is carried out by “clicking” on key 2.
To turn on the immobilizer, after deactivating the security mode, press button 2 on the main key fob.
"Valet". To activate it is necessary to select the corresponding icon with the cursor method and press the key 1. "Click" on the button 2 on the same icon turns off the service mode.
Anti Hi Jack. The active anti-robbery mode is activated by simultaneously pressing buttons 1 and 2 (for 1 second). Passive - by simultaneously "clicking" on button 2 on the additional key fob and on the F key - on the main one. The function can be deactivated by pressing the first button twice.

Programming

Entering parameters into the system memory is carried out in two ways:

manual programming in the car;
remote configuration via PC (personal computer).

Manual programming

Settings can be entered manually using the Valet service button as follows:

Deactivate security mode.
Switch off the ignition system.
Using the Valet button, enter the preset PIN code. If the numeric password is successfully entered, a series of red and green flashes of the indicator LED will follow. If the indicator lights up red, the code is incorrect, you should enter it again.
Based on the programming table, enter the number of the level and sublevel of the desired setting. To do this, press the service button the appropriate number of times.
If the LED lights up green, the selected function is active, red if it is disabled. In order to change the state of this option, press button 1 or 2 on the key fob. You can confirm the selection using the service key.
To exit the menu, activate the ignition system - the settings will be saved automatically.

It has a multi-channel radio path with an increased signal reception range and protection of the radio channel from interference in dense urban areas. The range of the radio channel in the alert and control mode is 1700 meters. The system uses original circuitry and software solutions that improve the protection of the radio channel, as well as the system as a whole. This allows the system to qualitatively perform its main task - the protection of the vehicle.

This system has the ability to automatically remote start engine:

Due to built-in relays for modern cars;

For domestic cars with high switching currents, it is necessary to purchase and install external relays.

DOWNLOAD user manual Pandora 1870i

Car alarm Pandora DeLuxe 1870i independently protects the following zones:

Car interior doors;

Hood and trunk limit switches;

Turning on the ignition system;

Pressing the brake pedal;

Activation of the built-in shock sensor (preliminary and alarm operation)

Motion sensor triggered;

Activation of a two-level sensor (preliminary and alarm operation);

Critical voltage drop in electrical network vehicle (disconnecting the battery).

The range of the radio channel in the alert and control mode is 1700 meters. For remote control car alarm Pandora 1870i provides a two-way keychain with an LCD display. During the development of the key fob, modern technologies and components. This reduced power consumption and increased battery life. In addition, the communication range and noise immunity of the radio channel have increased. In order to facilitate the perception of ongoing events, 16 melodies are pre-installed in the key fob. Each melody corresponds to a certain event. The sound volume is different: when notifying about service events, it is not very high, when an alarm occurs, the volume is maximum. The use of flashing indicators increased the information content of the key fob in conditions of insufficient lighting and adverse noise conditions, when it is impossible to hear the sound signal. When the green indicator flashes, it means that there were no alarms and communication is present. When the red indicator flashes, it means that an alarm message has been received, or communication with the main alarm unit has been lost.

_____________________________________________________________________________

Questions about car alarm Pandora Deluxe 1870i

Question: I have a Pandora Deluxe 1870i alarm installed, I worked in the country, and the key fob was in my pocket and some button was apparently pressed. The alarm went off, I turned it off. When I had to go, I started the car remotely, sat down and could not turn on the gear - the box was blocked. What to do?

Answer: Maybe the standard box lock worked for you, the instructions for the car indicate how to turn it off.

Q: Will the car fit? alarm pandora DeLuxe 1870 i on Nissan x trail 2015 Or advise which one is better to put, with auto start!

Answer: It will fit, but the model is outdated, we are not expected to sell it. We recommend the following alarm system starline-a94. It has a built-in CAN module, which is useful for correctly connecting the alarm to the wiring to the car.

Question: does the Pandora 1870i alarm system have autostart from the second key fob (without LCD display). If there is such an opportunity, then tell me the combination of pressing the buttons. I read all the instructions, there is no information.

Answer: The launch is carried out in the same way as the main key fob, as indicated on page 20.

Question: How is the following problem solved? Starting position - the car on the car alarm. I try to open, I press the open button as usual. A signal is made - both on the alarm itself and on the car (as usual) BUT the locks in the doors do not open. I try to open the door by the handle (the alarm system opened the door), but the door does not open. And after 30 sec. the car automatically goes into alarm. Next I try.
If before the expiration of 30 seconds I press the "put on the alarm" button, then the doors, without opening, remain closed, as it should be under the car alarm. I'm trying to open it again, but with a nuance. As soon as I press "disarm", the signaling signal both in the car and on the signaling itself (this is as always, as it should be) AND IMMEDIATELY after that I insert the key into the door and mechanically open the lock, and then the door itself before the expiration of 30 seconds, so that she does not automatically become
signaling.
Then I go, everything is as usual, until the next time I put on the signaling. When arming, I perform the actions in the reverse order: I press the signaling to arm (the signaling works, but the lock does not close) and after that I insert the key into the door lock and mechanically close it myself with the central lock until 30 seconds have elapsed. This is how I get out of the situation. I understand that the problem is in the car alarm - "does not want to close the door", but puts it under the alarm. Those. In case of unauthorized opening, the alarm will sound. Someone can suggest something?

Answer: A problem of this kind may be in connecting the Pandora 1870 i alarm to the locks, in the alarm unit itself, as well as in the central locking control module of the car,
therefore, you can definitely check it only on the spot, if you are not a car alarm installer, we recommend that you contact the installers directly.

Question: The remote control constantly shows that the car is running and open, what should I do?

Answer: Most likely, the problem is in the key fob receiver, where the quartz got lost as a result of mechanical damage. Also, the malfunction may be related to the antenna module, but this can only be checked practically by connecting a compatible working antenna module to the alarm.

Question: I have a Pandora 1870i. The display shows AUTO ARM, the switched off alarm level of the add. sensor and the alarm level of the shock sensor turned off. Flashing red indicator. The key fob does not respond to the car in any way. Add. keychain opens and
closes the car. What to do?

Answer: Try to remove the battery in the key fob for 30 seconds and insert it back, if it does not help, then make a request to Pandora support.

Question: I bought a car with a Pandora De Luxe1870i alarm installed on it, I try to start the car from the key fob, it doesn’t work (I press button No. 1, three beeps sound, I release the button, the headlights on the key fob and on the car start blinking, but the car does not start, old owner He says he didn't use it, so it's useless to ask him.

Answer: Here it is possible that the launch is not connected at all or is not configured, therefore, only contact the installers and check on the spot.

Q: I have a pandora 1870i. When I arm it, there are three beeps. type means that - something is not closed. everything checked and revised, everything is closed. when I remotely start the engine from the key fob, the engine starts and after about five minutes the alarm goes off (yells) opened closed the car from the key fob repeated and everything is the same. and it happens that in general the key fob does not catch the return signal during autorun. what's the trouble?

Answer: You need to carefully check all the limit switches, most likely, somewhere there is a problem with the wiring, since the autorun will not work due to a violation of the security zone. The best option You will have to contact the installers, who will check all the problems exactly on the spot.

Question: How to turn off the silent security mode? I do everything according to the instructions, but for some reason it does not work.

Answer: All car alarm modes are configured strictly according to the instructions, if the process does not exit, we recommend that you make a request directly to support.

Question: before changing the battery from the key fob, all the doors were closed, and after changing the battery, when you press the arming button, it rises but does not close the doors. tell everyone the problem?

Answer: Try to reprogram the key fob into the alarm memory, pp. 19-21, item 1 of the table.

Question: I put the car on the signaling when I take it off, the security is removed, but the doors do not open alarm Pandora 1870i tell me what to do?

Answer: A problem of this kind can be in connecting the car alarm to the locks, in the alarm unit itself, as well as in the central locking control module of the car, so you can only check for sure on the spot, if you are not an alarm installer, we recommend that you contact the installers directly.

Question: the keychain shows the knocker of the open door and the lock open - what should I do?

Answer: Try to remove the battery from the key fob, insert it again, if the situation does not go away, it looks like a software failure, contact the seller for warranty.

Question: I recently bought a car, installed a Pandora 1870 i car alarm, maybe I pressed something wrong, for some reason when I start the car from auto start after that the doors do not open with the key fob, there is a signal, but when without auto start it opens everything. How can I fix this, what is the reason?

Answer: Here, only on the spot to look, it may be due to both incorrect connection and features of the car's electrics. Possibly while the engine is running antenna module there is interference in the alarm, and it stops responding to the signal, try installing the antenna in another place.

Question: The car is equipped with a Pandora 1870 i alarm system with an immobilizer bypass. Opened the car with the original key. The alarm went off. Disabled
car alarm key. The car won't start now. The starter turns, but the car sleeps. How to be?

Answer: It is difficult to answer your question remotely. With this problem, we recommend contacting a qualified installer who will be able to determine the cause of the malfunction on the spot and offer options for solving the problem. Try to re-arm Pandora and repeat the steps, then in the correct order, first disarming, and then using the key.

Question: I have a Pandora DeLuxe 1870i alarm installed, it was installed in the service, is it possible to change the main unit to a fresher Pandora one without changing the wiring from the car alarm, if there are such alarms, which ones?

Answer: Modern Pandora blocks are different, like antennas, key fobs, so just changing the block will not work, but also manually switching the necessary wires from old alarm for a qualified installer will not cause problems.

Question: The car was closed, I opened it from the signaling, put things in the trunk, let's close it, I press close on the remote control, but it does not respond, I pulled out the battery and put it back in and the trunk and key flash on the remote control, I press to close the door, but it does not reacts, shows that the signal is gone and there is no action. What could it be?

Answer: Anything, desynchronization of the key fob could occur, in this case it will need to be rewritten into memory, pp. 19-21. And check the operation of the alarm with the second key fob.

Question: how to enable auto start by engine temperature and time? I bought a car with a Pandora de Luxe 1780i alarm, but there is no manual, how to turn it on with which buttons?

Answer: If we are talking about Pandora 1870i, then the instructions on pages 29-30 have the necessary information.

Question: How to remove the starter lock Pandora 1870i alarm, what could be the reason?

Answer: The lock might not turn off if the problem is in the lock relay itself or the anti-robbery mode was forcibly turned on, in the first case only contact the installers, in the second try to disable the robbery mode according to the instructions, p.36.

Question: there was an accident damaged the bumper of the car at the auto start, the damage was not significant, I did not immediately notice the alarm 1870i The last 10 events of the key fob did not give anything, tell me in the alarm unit you can find out this information and if so, what kind
block event memory.

Answer: If there was damage by a blow to the body, then, unfortunately, when the autostart is running, the shock sensor in the alarms is turned off in order to prevent false alarms, so the alarm did not control this moment in any way.

Question: I have a Pandora DeLuxe 1870i signaling device. I bought a new pager one to one like the old one, could not bind it to the system, turned to the specialists and said that the remote does not fit, because it is from 1870i-imod on the remote and it says imod which is between them a difference. Or tell me what is the problem.

Answer: A simple keychain differs from imod, we won’t tell you the nuances, but it’s compatible, it won’t or won’t work feedback - in different situations, incompatibility manifests itself in different ways.

Question: on Hyundai Avante 2011. was installed car alarm Pandora 1870 i.
Now there are 2 alarms. an alarm system was installed. Problems began with the drawdown of the battery for the first 3 months it started with a drawdown, and then the battery was discharged. Didn't charge. Bought a new battery. The situation is repeating itself. I don’t even know how to ask you a question so that you give an answer, and I passed it on to the installers. Is it possible that the car alarm is connected incorrectly together with the standard Hyundai alarm?

Answer: Incorrect connection of the alarm to anything can lead, here only check on site with the help of qualified installers.

Question: Can I install an AC-AAA battery in the key fob with display (1870i)? Will there be any failures, because battery voltage is slightly lower.

Answer: The operation of the key fob may be incorrect, since the battery produces 1.2 V, and the key fob is designed for 1.5 V.

Question: I have a Pandora 1870 i alarm installed on my KIA Sportage car. After the next setting of the main key fob, when you press close (open), it sends a sound signal, such as the machine is out of sight and briefly shows the full indication. When off and turn on again. key fob function close (open) is performed, but each time you need to turn it off and on. trinket. Is it possible to reset to factory settings?

Answer: There is no reset in the key fob itself, a strange situation, if the key fob is under warranty, contact the seller to diagnose the key fob.

Q: how to put on automatic switch on engine on time to warm up?

Answer: The instructions have all the data, pp. 29-30.

Question: How to properly install the Pandora DeLuxe 1870i base unit, the installers assure that it can be installed in any plane and at any angle (as they put me). Although the passport has specific recommendations for installation.

Answer: For most car alarms, the orientation of the block does not really matter, BUT, specifically in this alarm there are recommendations for installing the block, associated with the presence of a built-in shock and acceleration sensor. The best mounting option on most cars is to install the unit behind the instrument panel, where you can achieve its horizontal installation at the desired angle. You can check how the sensors work on your car, if there are complaints, then ask the installers to change the position of the block. Normal installers check the correct operation of security sensors even before they hand over the car to the owner.

Question: I have a Pandora 1870 i Stopped opening and closing doors. The battery is good, the door sensor indicator is on. Forced to use the central lock.

Question: I have a Pandora DeLuxe 1000i alarm installed. Is it possible to replace it with the 1870i by simply replacing the alarm modules without interfering with the already installed wiring?

Answer: It can be replaced with the old wiring, you will need to remake the x9 connector. The main alarm unit, antenna unit and key fobs will need to be replaced.

Question: I have a Pandora 1870 i alarm installed periodically, when the car is on the alarm, a signal on the key fob is triggered, as if someone touched the car, while the car is quiet and no one howls next to it. what could it be?

Answer: If you are triggered in 1 zone of the shock sensor, then it is worth reducing the sensitivity of both zones, and if it does not help, then try changing the installation location of the shock sensor. Sometimes trips occur due to temperature deformations of the part of the car on which the sensor is located.

Question: Tell me, please, how to find out what kind of alarm system I have. I know it's pandora, but I don't know which one.

Answer: You can specify the exact model by marking on the main signaling unit.

Question: I turned off the engine. got out of the car, took my clothes from the trunk and then - Pandora DeLuxe 1870 i keychain with LCD display started playing an incomprehensible melody, and the icon turned off the pre-alarm and alarm levels of the shock sensor and lost contact with the car, I want to turn on this sensor on the screen, nothing It turns out, I do everything according to the instructions with button 2, I select on. I confirm the sensor with button 1, the key fob is looking for a connection with the car and does not find it, it beeps there is no connection and again the display is off. sensors. I changed the battery, re-registered key fobs through the jack, both key fobs are registered, but LCD. the key fob does not see the connection with the car, and it is registered somehow strangely without sounds, I think that both were registered, tk. when the ignition is turned on, the yellow diode blinks 2 times! small keychain works! How to fix a glitch?

Answer: If the main key fob does not control the system, but the additional one does, then there is a possibility that the key fob with the LCD will fail. We recommend that you contact the installer to check its serviceability.

Q: I have a Pandora 1870i in my car. Question. How can I turn off the anti hi jack mode. Because the engine, ignition and all that other is blocked. And the key fob does not respond to commands. It seems that the key fob works but does not make commands. Help who knows.

Answer: If this mode has already worked, then you will need to enter a PIN code to disable it. Entered according to the instructions, p.33.

Question: how to turn on the turbo timer beep/Pandora deluxe1870i?

Answer: If this function during installation is implemented using a timer channel and programmed by the installers, then raise the handbrake with the engine running, press button 1 for 2 seconds until a confirmation sound signal. Next, remove the key from the ignition, get out of the car and turn on the security - the car should work for the programmed time. If this does not happen, then contact your installer for advice on the implementation of this function.

Question: Please tell me why the siren (sound notification) does not always work on the Pandora 1870i alarm? in all respects, the sound is at its maximum position.

Answer: Check the connection of the siren, as well as its serviceability, for this you can contact the installer.

Question: I had such a problem with the Pandora alarm. the icons flash constantly: key (maintenance mode), trunk open. The keychain does not affect any of my actions. Tell me, please, what is the problem.

Answer: If the second key fob also does not control the system, then the reason is most likely in the antenna module. If only the main key fob does not work, then the reason is in it. Replace the battery, try programming it into the system again, and if it does not work, then contact the service center to check the key fob.

Question: I have a pandora 1870i alarm, I started the car from the key fob at home. waited for it to warm up, got out, opened the car continued to work and the tachometer showed normal warming up, pressed the brake, the engine stalled, inserted the key into the ignition, turned it. panel does not light up the car tries to start and does not start 3 times. open and close from the key fob works, I tried to start it from the key fob, it does not work. threw off
terminal from the battery, took out the battery, still the same effect, what to do?

Answer: Try disarming in emergency mode, p.33. To disarm, you will need a code that is written on the plastic card included with the 1870i. If the problem persists, then contact the installers directly.

Question: I encountered such a problem, the Pandora 1870i alarm system (determined by the key fob), the problem is that the key fob does not establish communication with the car, the red light blinks constantly, the green light starts blinking very rarely, it was such that on
for two hours I couldn’t open the car, I opened it, but I couldn’t remove it from the alarm and start it, and what’s the reason? either the key fob is out of order and you need to buy a new one, or this is a problem with the control unit (a glitch caught the signal), now I close the car with a standard central lock.

Answer: In this case, it is necessary to try to program the key fob into the alarm memory, specifically for 1870 this process is indicated on page 31 in the programming table. Note that Pandora has several models with the same keychain. Also, replace the battery with the key fob.

Question: In winter, when the air temperature is below -8C, I encountered a problem with the auto-start of the Pandora 1870 i car alarm: on. autostart with the arming button up to 3 beeps: the shock sensor icon and the engine operation icon are displayed on the display, the engine autostarts, but the engine does not start and stalls. With the key, the car starts and when the engine is warm, the engine autostart occurs without problems! What is the problem?

Answer: Check how the engine start will work if you leave the key in the lock. If normal, the reason is the immobilizer crawler. Also try changing the way the engine starts.

Question: I installed a Pandora 1870i alarm on my car with the connection of an additional altonika sensor, after which, in armed mode, remote start is not implemented. If in the next security cycle the sensor does not work, then the remote start is implemented. Is it supposed to be like this, or is there some kind of problem? And when using this alarm, is it possible to autostart
engine when the battery voltage is critical?

Answer: Try programming function I-3.4 to enable. Low battery voltage start is not performed, and the system will signal such a decrease.

Question: Tell me, will the cyclic autorun work in the absence of communication with the key fob? Will this alarm fit on Nissan Cube Z10 automatic transmission 1998?

Answer: Autostart will work if there is no key fob in the alarm coverage area. This alarm can be installed on your car.

Question: 1. Tell me, what else, besides 2 temperature sensors, + (a siren and a lineman, will I need to buy more? Is it planned to use the functions of remote start, autostart by timer, temperature. Without a gsm channel. 2. Do I need additional sensors, modules to provide ignition support mode?

Answer: 1 - This will be enough for installation. 2 - No additional modules are needed to support ignition.

Question: I have a pandora 1870 i on the crown, I closed the car, and when I approached it to open it, I pressed on the key fob, it shows that it is open, but the car does not open and does not respond to the key fob, I threw off the terminals, and there was no sense in coming to the service, they said that the code which one is needed, and which one, I don’t know, can I do something?

Answer: Complete with Pandora alarms comes a plastic card with a personal code, if the equipment is preserved, then a card should be found in it. Using the code written on this card, you can enter the alarm software settings and change them. If the card is lost, then contact Pandora support directly.

Question: I bought a car with a Pandora alarm installed, I determined from the key fob that it was 1870i, I can’t find instructions anywhere, all the instructions that are, open Pandora 1870. Tell me, does this alarm have a function to start a car by temperature (engine, interior)?

Answer: This alarm has autostart by temperature, but the temperature sensors must be connected separately. Further, according to the instructions for alarm 1870, program the operation of the temperature start. The instructions for these alarms are common, the difference between 1870 and 1870i is that the latter has a different type of key fob.

Question: I have a Pandora DeLuxe 2100 (something like this, in general there is no box where to look exactly), if I buy a Pandora 1870i from you, can I just replace the control unit of the old signaling with a new one, or will I have to do something else connect? those. does the input itself have a difference or are they standard?

Answer: In the indicated models, the connectors of the blocks are the same.

Question: Is it possible to install a Pandora DeLuxe 1870i alarm on a 1990 VW Passat? in., RP engine, with the ability to autostart?

Answer: You can install this alarm on your car if the car uses an injection engine. To implement autorun, you will need ordinary automotive five-pin relays.

Question: I have a diesel car with a turbine. this alarm will go to the car so that it works, and then it goes off, since I have a turbine.

Answer: This alarm is adapted to work on vehicles with a diesel engine.

Question: I installed a Pandora 1870i, but when arming and disarming, the central lock does not always work and I have to open and close it with a key. And after a while, the key fob goes out completely and flashes a green light. Can you please tell me something is not configured or not installed correctly?

Answer: In any case, the lock should work correctly, you need to check the connection and software settings, contact your installers, they should resolve such issues on the spot. As for the green lights, this should indicate that the alarm is within the radius of communication with the alarm, i.e. can take alarm signals from security sensors in case of unforeseen situations.

Question: Can this alarm be installed with the Pandect IS 600 immobilizer? by what principle can one determine which alarm is installed on one or another immobilizer?

Answer: The principle is essentially the following: if the alarm is with auto start, then an immobilizer is needed, which will allow you to save the auto start function. This is allowed by immo, which have a built-in motion sensor. Pandect IS 600 is suitable for this task.
Also, the joint use of 1870 and IS 600 allows you to implement the function free hands, i.e. without using the key fob, it is possible to automatically remove / arm the security mode and open / close the doors when approaching / moving away from the car.

Question: When installing a car alarm with auto start Pandora DeLuxe 1870i with dialogue code on the car, the car service installer reported that there was no shock sensor in the kit. Does this car alarm model have a built-in shock sensor and a tilt / motion sensor (in the instruction manual it is written: in the Pandora 1870 i model, the sensitivity setting function of the built-in shock sensor and motion sensor is not supported). Or the shock sensor and the tilt/motion sensor are purchased separately for subsequent installation on the vehicle.

Answer: The Pandora DeLuxe 1870i uses a dual-zone built-in shock and tilt sensor with adjustable sensitivity. The setting method is indicated in the instructions, page 21.

Question: There is no immobilizer and can-bus on the car. How then to install? And, if installed by analogy, will some of the system functions be lost?

Answer: It is set in an analog way. No additional devices are required to implement autorun. In functionality, everything will depend on the implementation of the functions by the installer.

Question: Pandora 1870i, does this alarm have auto start by temperature, time? and remote start?

Answer: When implementing autorun during installation, remote launch is available, as well as automatic start by engine temperature and time.

Question: please tell me what is the difference between this model and the discontinued pandora dxl 2500?
1 does it connect via can bus?
2 is there the flexibility of warm up settings like the pandora dxl 2500?
3 are needed additional blocks sensors for the implementation of auto-heating by engine temperature or is everything included in the kit?

Answer: 1. This alarm system cannot be connected via CAN bus.
2. It has flexible autostart settings - it is carried out by timer, by time and by engine temperature. It is also possible to set the stop according to the engine temperature.
3. There is no temperature sensor included, DS18S20 temperature sensor will do. Also, to implement autorun, you will need ordinary automotive five-pin relays.
4. In terms of its service and security functions, this alarm system is similar to pandora dxl 2500, it can be considered as an alternative.

Question: Lost connection with the key fob. the battery is new. what could be the reasons?

Answer: Perhaps the key fob has lost connection with the alarm or is out of order. Try re-programming the key fob for the alarm, and also check the key fob for serviceability.

Question: I am planning to purchase this alarm, I have a few questions: 1. In addition to it, I would like to install a Pandora BM-105D digital relay. 2. How well does the Saturn AU-60 immobilizer crawler work with it? 3. How many additional relays and temperature sensors need to be installed for the full implementation of autorun?

Answer: V this moment there is no similar wired hidden interlock relay.
2 - The Saturn AU-60 bypasser can be used with this alarm if your car uses a standard immobilizer with a chip in the ignition key. Module bypass pandora DI-03 has the advantage of being easy to connect and can be used for immobilizers with proximity tags.
3 - Two temperature sensors can be connected to the alarm, one sensor is enough for autostart by engine temperature. The DS18S20 sensor is used.
The number of relays will depend on the variant autorun connections, they are presented in the instructions on page 30.

Question: does this alarm really have built-in with the main module, tilt, displacement, shock sensors? Missing just a volume sensor?

Answer: Yes, this alarm has a built-in integral accelerometer for detecting movement, tilt and shock with adaptive processing algorithms and sensitivity adjustment from the key fob.

Question: We installed a pandora 1870 i alarm system on a Lada Kalina deluxe car. when disarmed, only the driver's door opens,
but it closes everything 4. tell me if this is a feature of the car or the installers did not set something or did not program it in the alarm settings.

Answer: Perhaps you have a two-step door unlocking mode - the first press opens the driver's door, the second press unlocks all other doors. This feature is programmable. Also, this feature can be in the standard control module of the central lock of the car, where there is a 2-step unlocking. In this case, you can
will connect directly to the activators, bypassing the module, but then all the doors will not open from the key.

Q: We installed an alarm in the summer. now, at t below 0, with remote start, the engine starts and stalls after a few seconds. this is repeated 3 times. I start the car from the key, warm it up a little, then dist. startup works fine. what is the reason? where to look?

Answer: Possibly low battery, insufficient voltage in the network. Contact the installers to resolve the issue on site.

Question: If turned on anti mode hi Jack how to turn it off and can it turn on accidentally by simply pressing the buttons on the key fob?

Answer: The operation algorithm of the anti-robbery mode is described in detail in the manual, p.36. You can accidentally activate this mode only theoretically, the main thing is not to give the keychain to children.

Question: after 4 months on a kia sportage with a keyless start, the pandora 1870i alarm started to malfunction, the alarm disarm button worked after 2-3 presses, now the connection with the open button has completely disappeared, you have to use electronic key. What could be the reason?

Answer: Or there is a problem in the key fob transmitter, this may be due to mechanical damage. Or the antenna module is the source of such work, but this can only be verified practically by connecting another antenna.

Question: is it possible to connect the mongoose PWM-4 power window control module to this alarm? Is it possible to control the lifting and
lowering windows? Is it possible to implement the operation of the engine under protection without an ignition key in this alarm?

Answer: You can connect to the alarm system, as it has the necessary outputs. As for the module itself, there is no exact information whether it has an output that would allow you to implement the control option you indicated from the key fob. It is possible to implement the operation of the engine under protection without an ignition key (up to 2 hours).

Question: Will autostart work on my KIYA Sid car or do I need an engine temperature sensor that is not included in the kit?

Answer: Autostart will work, except for starting by temperature, if you do not connect an external temperature sensor.

Question: The range of a two-way remote control: initially you emphasize that it is 1700 m in both directions, then you indicate 500 m for control and 1700 m for reception, and in the instructions in general 500 and 1000, respectively. What to believe?!

Answer: For control up to 500 m, feedback up to 1700. The instructions say NOT LESS - 300 m, 1000 m. the manufacturer means that, for example, the control radius should be 300-500 m. In practice, such indicators are possible only outside the city or in a small village. In urban conditions, especially in the center, where there is a lot of external interference, the range of the key fob is reduced by 2-3 times.

Question: I can’t set the warm-up time from the key fob, I start it, I want to set it for 10 minutes, but it works and works. I do everything according to the manual.

Answer: If you have questions about programming, then it makes sense to contact the installers or those. manufacturer support.

Q: I've set the alarm on a 1870i Chevrolet Cruze, but the autostart doesn't work. Very upset. what to do?

Answer: Perhaps the launch is not connected at all. Contact a qualified installer. If a regular immobilizer is installed on your car, then a block is needed to implement autorun. If the box is mechanical, then you need to prepare for launch. This information is in the instructions.

Question: After installing this alarm, the car began to start from the 2nd or 3rd time. Is it something wrong with me or what? And the trunk opening button stopped working, i.e. I open the trunk only with the key fob, but this is not convenient.

Answer: The installers were smart with the connection. Contact the "experts" who installed this alarm for you.

Question: Installed Pandora 1870 i, Mazda3 car on the mechanics. Problem: At auto start, it does not turn on, although all switches were left in the "ON" position, the stove turns on only after inserting and turning the ignition key). The essence of the question is: it should be so, or did the installers get smart, can it be fixed, and how? Winter is coming and you don't feel like getting into a cold car in a cold seat ... Otherwise, there are no problems.

Answer: The stove and other heating must be turned on, since the auto-start alarm includes the so-called. consumer group: air conditioner, stove, etc. If you have a connection problem, contact the installers who installed the alarm system for you.

Question: My car was moved by 2 meters, the movement sensor worked and the siren (not autonomous) turned off the alarm and reset the errors, but the siren still yells. What should I do to fix this error?

Answer: switch the security mode, it can help if it doesn’t work, then contact those. support.

Question: Is it possible to install Pandora 1870 i on a Lada Priora car with an activated standard immobilizer? After all, it will block autorun. If possible, what needs to be purchased in addition to the alarm.

Answer: You can definitely install it, you only need the Saturn AU 50 immobilizer bypass block.

A modified version of the Pandora DeLuxe 1870 car security system. The package includes a key fob from the system Pandora DXL 2500.

car alarm Pandora DeLuxe 1870i has a multi-channel radio path, similar to the 1870th model. There is the possibility of organizing a full-fledged autorun for modern cars due to the built-in relays. For domestic cars with high switching currents, external relays will be required. As for the rest, this latest version software with full functionality support, all the flexibility of setting up and adjusting the 2000-2100 model.

Equipment:

Keychain with LCD, double-sided;
Additional keychain without LCD display;
Control unit (main unit);
RF module (radio module);
Cable set;
Valet button and LED indicator, with wires;
Mounting kit;
Documentation.

Specifications and parameters Pandora Deluxe 1870i

Control method - Keychain with LCD display
autorun - There is
GSM - No
GPS and GLONASS - Not
CAN interface - No
LCD key fob - Yes (LCD key fob D154 for 1870i and 2500i)
Optional key fob without LCD - Yes (R302L key fob for DXL 1870i/2000/2100/2500)
Control via website and apps for Android and iOs - No
Turbo timer - yes
Shock/tilt/motion sensor - yes

Dialogue code - yes

Programs and instructions for Pandora Deluxe 1870i

Installation manual.pdf
Firmware v 6.876 from 2010.08.06.zip
Complete Guide manual.pdf
Quick Guide manual.pdf
Pandora Alarm Studio
Pandora DXL Loader

Questions and Answers for Pandora Deluxe 1870i

In this section, we help you choose an alarm for your car. Technical advice in this section is not provided. For advice on technical matters contact technical support free number 8-800-700-17-18.

Frequently Asked Questions and Helpful Articles:

What will happen to my car warranty?
Why disassemble a regular key to connect autorun?
Will there be keyless bypass by means of Pandora, Pandora CLONE?
How much money is spent per month on a GSM connection with an alarm system?
What is the difference between different security systems Pandora?

Celsior67.

August 25, 2014 Can you please tell me where to buy temperature sensors for this alarm? Thanks

Administrator

August 27, 2014 Hello! We do not have such sensors, unfortunately.

Ilya Bogdanov

August 28, 2014 Good afternoon, Is it possible to flash the Pandora DXL 1870i car alarm to work and control the car from the iPhone?

Administrator

August 28, 2014 Hello! No, it's impossible.

Anonymous user

October 07, 2014 Good afternoon, the key fob stopped arming/disarming, the battery is new, the key fob is working, the key and parking indicators are on. The signal goes, but the confirmation does not pass.

Administrator

October 07, 2014

Roman Yashkin

October 09, 2014 Hello, tell me what to choose for Toyota Avensis T250? 2004, D4. Choice between LX3257 and 1870i.

Administrator

October 10, 2014 Hello! The 1870i is a very old model, so the LX 3257 is the better choice.

Stepan

October 14, 2014

Stepan

October 14, 2014 Hello, tell me the model (and additional modules that may be needed) for the Skoda Octavia Tour (A4) 2000. It is necessary: autostart, "comfort" to be built into the standard one, a channel for controlling the engine heater,

Administrator

October 14, 2014

Administrator

October 14, 2014 Hello! Pandora LX 3257 will suit you, add. the comfort module costs 2500 rubles.

Kolyan Fesko

November 01, 2014 Hello, tell me which model is best for taureg 2006 without autorun but with a long distance with a key fob ?!

Administrator

November 04, 2014

Andrey Kandybo

November 07, 2014 Of course, he froze the garbage ... but are there options for gas 3110? with autostart?

Administrator

November 08, 2014 Hello! You can install Pandora LX 3257 :)

Dmitry

November 20, 2014 good afternoon, please tell me if the Pandora DXL 3000 keychain is suitable for the Pandora Deluxe 1870i alarm, instead of the Pandora DXL 2500 keychain included in this package. Thank you.

Administrator

November 20, 2014 Hello! No, it won't.

Alexander Stepin

November 26, 2014 Good morning! Toyota Corolla 2008 installed Pandora Deluxe 1870i with an additional immobilizer COBRA CONECT G-500, which ordered a long life, what can be advised to install instead of it and the price of the issue ...

Daria Sergeevna

November 26, 2014 good afternoon! please tell me which car alarm is better to install for Renault Fluence 2010 with a standard immobilizer, so that there is an auto start and a window closer? thanks in advance

Alexey Zenchenko

November 26, 2014 hello. how to replace the pandora deluxe 2000 keychain?

Administrator

November 27, 2014 Hello! Consider Pandora LX 3297. To finish the glass, you will need to install additional. comfort module, for autorun you will need your second key or its duplicate.

Administrator

November 27, 2014 Hello! Unfortunately, nothing.

gene ridges

December 12, 2014 hello, can you buy a keychain for the car alarm Pandora DeLuxe 1870i.

Administrator

December 16, 2014 Hello! We have keychain for i-mod version only.

Dmitry Batkin

December 30, 2014 Hello, the pandora DeLuxe 1870 keychain has flown, where can I buy it?

Dmitry Batkin

December 30, 2014 Hello, the pandora DeLuxe 1870 keychain has flown, where can I order a new one or an analogue that fits?

Administrator

December 30, 2014 Hello! If the system is i-mod, you can order from us.

Dmitry Batkin

January 05, 2015 And what does I-mod mean?

Administrator

January 07, 2015 If on reverse side key fob says "imod", we have one. If not written - no. The i-mod version systems have a different radio path, so the i-mod and non-i-mod versions of the keyfobs are not interchangeable.

Svetlana Ryapisova (Levchuk)

January 09, 2015 The instruction manual says about checking the number of key fobs registered in the system, but does not describe the mechanism for registering new key fobs. I bought new keychain please tell me how to register a new keychain.

Anonymous user

January 12, 2015 The autorun icon on the key fob does not appear, can this be fixed with firmware?

Alexander

January 27, 2015 Hello, the Pandora 1870i alarm, the key fob with feedback loses its network, it doesn’t react, but the second simple key fob is working properly, can I do something or the key fob grunted?

Administrator

January 27, 2015 Hello! Contact those. phone support 8-800-700-17-18.

Alex

February 18, 2015 For Toyota Prado 2010 with keyless entry and push start system, what can you recommend from the budget? Auto start is not needed.

Administrator

February 19, 2015 Hello! Consider the Pandora DXL 3210.

Anonymous user

February 25, 2015 You got keychains for Pandora Deluxe 1870i

Administrator

February 26, 2015 Hello! Yes, key rings are available.

Ignatius

April 19, 2015 Hello! Is it possible to order/buy a cover for the battery compartment (AAA battery) on a key fob with feedback?

Nikita Ponomarev

April 20, 2015 Hello, on the Pandora Deluxe 1870i, autorun is implemented only by purchasing some additional device?

Administrator

April 25, 2015

Administrator

April 25, 2015 Hello! Please contact those. phone support 8-800-700-17-18.

Igor Boydachenko

May 11, 2015 Good afternoon! Is it possible to buy a keychain for pandora deluxe 1000 from you

Administrator

May 14, 2015 Hello! Unfortunately, there are no such keyrings.

Nicholas

June 29, 2015 Hello! Is it possible to purchase an RF module (radio module) for Pandora Deluxe 1870i from you?

Administrator

June 29, 2015 Hello! Unfortunately, you can't.

Alexey Savenko

August 03, 2015 Hello. I have a 1500i alarm. The main pager key fob was lost, only an additional one remained without feedback. Tell me, is it really possible to buy it somewhere? Or maybe another model will fit? If not, is there some kind of alarm model that can be connected to standard connectors from this one without alterations (just change the main blocks)?

Administrator

August 04, 2015 Hello! Call us at tel. +7 495 975-98-25, we will consult.

Alexey Savenko

August 04, 2015 your technicians are not competent in their matters, in particular from the installation department. They said that no other model will fit this pinout alarm. BUT, if you carefully look at the installation instructions for my 1500i and 1870i models, we will see that all connectors and pin markings are absolutely identical, i.e. you can safely replace the main unit of my alarm system with a 1870i model and the alarm system will work properly, without any alterations. I will buy. Can I pay with a visa card through the website?

Administrator

August 06, 2015 http://www.site/sections/delivery-card

Alexei

September 22, 2015 Hello. The question arose, periodically there is some kind of glitch with the signaling. In the morning after a downtime, the car is removed from the alarm, but the zz does not open, you have to unlock it with a key. Sometimes it goes away on its own. Sometimes with the first press it is disarmed, and then with the second press it unlocks the locks. And such glitches appear and pass by themselves. But they only appear in the morning. All day then the alarm works fine, opens / closes with the first press as it should be. What could be the problem?

Administrator

September 23, 2015 Hello! Please contact technical support at tel. 8-800-700-17-18.

Dmitry

September 30, 2015 Do you have a keychain for Pandora Deluxe 1870i

Administrator

September 30, 2015 Here it is please http://www..html

Sergey

October 10, 2015 Hello! From the main key fob, the alarm is set and disarmed with an incomprehensible glitch, you can turn on the signaling and then turn it off for a long time, the key fob sends a signal and there is no answer from the unit, while the LEDs on the key fob work randomly, green blinks for a while, then red blinks and no reaction to an attempt to control the signaling, and then for no reason everything starts working again and such a glitch is constantly. With an additional key fob, the alarm works as expected. What could be the reason, can the main key fob be replaced?

Administrator

October 12, 2015 Hello! The alarm is already old, the key fob is most likely out of order. You can purchase a new keychain http://www..html

Mark

October 24, 2015 Hello, please tell me! I have a pandora 1870i alarm installed, I know that in order to start the engine by temperature, it is required to install an additional temperature sensor! But how to start a cyclic start by time (timer)? There is such a function in the description, but in all instructions the key fob is from 1870 and not 1870i and there is no "start" pintogram on the key fob! So how to make autoprogram on time? ??

Administrator

October 26, 2015 Hello! Contact those. phone support 8-800-700-17-18.

Timur

January 28, 2016 I want to replace the LCD keychain for this model, which one is suitable for other Pandora models?

Evgeniya

January 28, 2016 Hello! Not suitable for any other model. Here is a new key fob from this alarm http://www..html?recommended_by=popular

Timur

28 January 2016 Thank you!

Andrei

January 30, 2016 Hello. Will the Pandora Deluxe 1870i fit on the VAZ 2170 (priora)

The built-in Intelligent Digital Accelerometer performs motion/tilt/shock sensor functions. The built-in relay module for realization of function of automatic and remote start of the engine. In addition to the main connectors, there are additional connectors under the cover - connectors for temperature sensors, additional sensors, additional autorun relay, iButton key etc. Board and components

Keychain LCD D073 (154) DXL 1870i/2500

Keychain with LCD, double-sided. Small-sized ergonomic dual-processor keychain with LCD. The key fob is highly informative - 80 independent LCD segments, 16 melodies, vibrating alert, bright status LEDs. Enlarged service icons. The visibility of the segments does not depend on the viewing angle. Separate indication of motion sensors, shock, additional sensor.

RF Module DeLuxe 1870i/2000/2100/2500

RF module (radio module). The module is usually attached to windshield cars. The module has a button to call (search) the LCD key fob.

Keychain R302L DXL 3000-3290

Additional key fob without LCD indicator, three-button, two-sided, interactive. The key fob is equipped with a lithium battery. Additional keychain for Pandora DXL 3000 series (DXL 3210, 3500, 3700, 3290). Specify the alarm model!

SPTA fasteners Deluxe

A set of fasteners, including: limit switch cable L10, ground contact 019, rubber limit switch, double-sided adhesive tape 30x30, R = 2mm, 5G screw f4.2x13 silver, L450 black tie, Zip lock 8x12 package.

Cable LED L150 v2 assembly

Cable LED L150 v2 assembled. Multifunctional tricolor led indicator state of the car alarm, according to its readings, you can determine what mode the system is in. Works with everyone Pandora car alarms. Cable length - 1.5m.

VALET L150 v2 cable assembly

VALET L150 v2 cable assembly with adhesive tape. Miniature VALET button covert installation, with which you can carry out emergency disarming of the system, emergency arming of the system, configure the parameters of the car alarm. This button is equipped with all Pandora car alarms.

DeLuxe central locking cable

Categories

Popular