Door hinges with axle offset. How to understand the variety of types of door hinges. The difference between loops according to the material of manufacture and coating

Hidden hinges KUBICA

Adjustable hidden hinges Koblenz Kubica
for interior doors are wide,
a regularly updated line of models for any
projects of interior and entrance doors.

Door hinges for furniture facades

Material : Zamak.
Finishing: mat. chrome, black.
Minimum Thickness: 18 mm.
Version : universal.: 19 kg.
Adjustments:
X: Horizontal ±1.5mm.
Y: Depth ±1 mm.
Z: Vertical ±1.5mm.
Door test

Hinges Kubica K1000

Certified according to
with European regulations EN1935:2004

Material : Zamak.
Finishing:
mat. chrome, mat. nickel, mat. gold,
bronze, black, white.
Minimum Thickness: 32 mm.
Version
Adjustments:
X: Horizontal +3; -1.5 mm.
Y: Depth ±1 mm.
Z: Vertical ±2.5mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K6200

Material : Zamak.
Finishing:
mat. chrome, mat. nickel,
glossy gold, antique bronze.
Minimum Thickness: 32 mm.
Version : universal.: 45 kg / 60 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1 mm.
Z: Vertical ±2.5mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K6300

Hinges with offset up to 13 mm

according to European standard EN 1634.2

Material : Zamak.
Finishing:
mat. chrome, mat. nickel.
Minimum Thickness: 40 mm.
Version : universal.: 60 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1 mm.
Z: Vertical ±3 mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K6360

Hinges with offset up to 12 mm

Material : Steel / Zamak.
Finishing: mat. chromium.
Minimum Thickness: 38 mm.
Version : universal.: 60 kg.
Adjustments:
X: Horizontal +2; -1.5 mm.
Y: Depth ±1 mm.
Z: Vertical ±2.5mm.
Door test: height 2100 mm, width 900 mm.

Hinges with patented self-centering screw system

Material : Zamak.
Finishing:

Minimum Thickness: 30 mm.
Version : universal.: 30 kg / 45 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1 mm.
Z: Vertical ±2.5mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K6700

Certified and tested for fire resistance
according to European standard EN 1634.1

Material : Zamak.
Finishing:
mat. chrome, mat. nickel, gold gloss.
Minimum Thickness: 40 mm.
Version : universal.: 50 kg / 70 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1 mm.
Z: Vertical ±3 mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K6900

This model has been discontinued

Material : IXEF (plastic).
Finishing:
mat. chrome, mat. nickel, mat. gold, black.
Minimum Thickness: 30 mm.
Version : Right DX / Left SX.: 33 kg / 40 kg.
Adjustments:
X: Horizontal ±1mm.
Y: Depth ±1 mm.
Z: Vertical ±1mm.
Door test: height 2100 mm, width 900 mm.

Hinges K27 with central positioning

Material : Zamak.
Finishing:
mat. chrome, mat. nickel, gold gloss, bronze.
Thickness: 35 mm - 45 mm.
Version : universal.: 60 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1 mm.
Z: Vertical ±3 mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K2400

Hinges for doors and furniture fronts from 25 mm thick

Certified according to European regulations
EN1935:2002 and CUAP 04.05/12 v.2006,
tested for fire resistance
according to European standards EN 1634.1

Material : Zamak.
Finishing: mat. chromium.
Minimum Thickness: 25 mm.
Version : universal.: 40 kg / 60 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1.5 mm.
Z: Vertical ±3 mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K3000 KUBIKUADRA

Hinges for rebated doors 10 mm x 10 mm

Material : Zamak.
Finishing:
mat. chrome, mat. nickel, gold gloss.
Thickness: 45 mm.
Version : universal.: 40 kg / 60 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1 mm.
Z: Vertical ±3 mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K5080

Certified according to European regulations
EN1935:2002 and CUAP 04.05/12 v.2006,
tested for fire resistance
according to European standards EN 1634.1

Material : Zamak.
Finishing:
mat. chrome, mat. nickel, gold gloss.
Minimum Thickness: 40 mm.
Version : universal.: 80 kg.
Adjustments:
X: Horizontal ±3mm.
Y: Depth ±1 mm.
Z: Vertical ±3 mm.
Door test: height 2100 mm, width 900 mm.

Hinges with 7 reference points, adjustable in three axes

Hinges Kubica K7000

Certified and tested for fire resistance
ANSI/UL 10C - Fire Test of Door Assemblies

Material : Zamak.
Finishing:
mat. chrome, mat. nickel, gold gloss, black.
Minimum Thickness: 35 mm.
Version : universal.: 40 kg / 50 kg.
Adjustments:
X: Horizontal ±2mm.
Y: Depth ±1 mm.
Z: Vertical ±2 mm.
Door test: height 2100 mm, width 900 mm.

EN1935:2002 e CUAP 04.05/12v. 2006
Tested for fire resistance according to European regulation EN 1634.1

Material : Zamak.
Finishing:
mat. chrome, mat. nickel, gloss gold, steel.
Minimum Thickness: 40 mm.
Version : universal.: 80 kg / 100 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1 mm.
Z: Vertical ±3 mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K7120

Certified according to European regulations
EN1935:2002 e CUAP 04.05/12v. 2006
Tested for fire resistance according to European regulation EN 1634.1

Material : Zamak.
Finishing:
mat. chrome, mat. nickel, steel.
Minimum Thickness: 40 mm.
Version : universal.: 120 kg / 140 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1 mm.
Z: Vertical ±3 mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K7200

Material : Zamak.
Finishing: mat. chrome, mat. nickel.
Minimum Thickness: 40 mm.
Version : universal.: 200 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1 mm.
Z: Vertical ±3 mm.
Door test: height 2100 mm, width 900 mm.

Hinges Kubica K2000 TWIST

Hinges with built-in closer

Material : Zamak.
Finishing: mat. chrome, mat. nickel.
Minimum Thickness: 40 mm.
Version : universal.: 60 kg.
Adjustments:
X: Horizontal +3; -2 mm.
Y: Depth ±1 mm.
Z: Vertical ±3 mm.
Closing speed:
high, medium, low.
Door test: height 2100 mm, width 900 mm.

How to choose hinges for interior doors, what to look for, how this fitting is classified and differs, we will talk about this in this article.

Good interior doors modern design interior are an indicator of a competent attitude in matters of creating design solutions. In order to finally produce a positive effect with new doors, you should thoroughly take care of the quality of the door fittings.

Extremely necessary element, ensuring the proper operation of interior doors, are considered door hinges.

According to European standards concerning this detail, the life of the door hinges should be at least 20 years, which equals approximately 200 thousand opening-closing cycles. When choosing hinges, you should carefully specify the weight of the door. This indicator is formed based on the dimensions and design of the product. Most door hinge manufacturers specify the maximum load that their product can withstand. The most suitable tensile strength is usually around 21 kg.

How to choose door hinges

Important role when choosing door hinges, the underlying material plays. Brass hinges occupy a leading position in the market of door fittings. Due to the high plasticity of the metal, the assembly processing of fittings is easy, without causing difficulties. The surface of the product is often chrome-plated, in some cases, simply polished.

In addition to the material mentioned above, fittings for interior doors can be made of zinc and steel alloys. Such products are still covered with a small brass coating in order to prevent strong friction between the moving parts of the hinges, to eliminate the possibility of corrosion damage.

Range colors products are wide enough.

Steel loops have the widest tensile strength and quality, respectively, their cost is higher. Brass door hinges are quite soft, which leads to rapid wear of the moving parts of the part. Steel hinges have a longer service life, since the metal is less ductile, key features products remain unchanged over time.

Hinges for interior doors: types

In addition to the material of manufacture, the types of hinges for doors differ in terms of installation possibilities. There are hinged, screw-type hinges. Screwed door elements are a pair of cylinders small size having corresponding fastening sections on the sides, mounted on the box and the door itself.

After firmly fixing all the parts, the cylinders are mounted on each other. This type of hinge is mainly used for doors weighing more than 40 kg.

Classic option door fittings are hinged hinges. They are equipped necessary holes for installation. One side of the part is attached to the door leaf, the other to the door frame.

Door hinges with axle extension

There are also loops of a generic, non-generic type. Universal hinges allow you to ignore the side of the opening of the canvas.

Door hinges with axle extension are designed if it is necessary to shift the axle on a single-sided opening door. Such hinges are often used for doors mounted in a door frame, in glass partition when the width of the door itself, in size, is greater than or equal to the size of the box.

For a non-universal hinge, only one side of the opening is characteristic - to the left or to the right. Therefore, when choosing them, the side of the door opening must be taken into account.

When choosing such a product, it will not be superfluous to provide for the possibility of dismantling interior door. If screw-in or non-universal hinges are installed, dismantling will not be a serious obstacle. Universal hinges will cause much more difficulties, because they will need to be unscrewed from the door leaf door frame.

When choosing door hinges, it is necessary to take into account many nuances. If the door weight exceeds allowable rate loops, there is a possibility of their deformation, which will lead them to complete unsuitability. Screw hinges require a sufficient thickness of the door leaf. Otherwise, the canvas may split at the installation site. given element. When the loop begins to creak, this indicates rather its partial deformation or wear.

One way or another, the installation of an interior door, the selection of the parts necessary for it, requires the advice of a qualified craftsman.

According to the site gals-master.ru

Door hinges are devices with which the canvas is attached to the frame. Actually the loops are the one magic tool, which turns the "semi-finished product" - door leaf into functional and convenient design. Therefore, the choice of such important element filling the doorway must be approached responsibly - study the range, understand the types of devices and find the option that will meet individual requirements.

Door hinges are devices with which the canvas acquires the ability to fulfill its main functions : open, close. Device manufacturers have filled the market with a solid range of door hinges, which, at first glance, only a specialist can understand. However, the whole variety of "styles" and models of loops is classified into groups and is not difficult to study. Therefore, you should not limit the freedom of choice of the buyer and order a set with standard hinges - it is better to spend a little time and find the option that will exactly match your own ideas about the functionality of the door.

Types of door hinges

The first thing to remember when choosing a hinge is that a modern range of devices will allow you to realize any ideas in the interior, including the possibility of opening both inward and outward ( bar). The main thing is to study specifications and accurately determine the type that will best meet individual requirements.

Loop types:

1. Universal have a long service life, do not require special skills during installation and are suitable for any opening side ( right, left). However, when choosing such a device, it must be remembered that it will not work to remove the door from the hinge for a while, for example, removing a large-sized headset - first you need to unscrew the product .

1. Removable (detachable) easy to use and install the door is hung). Distinctive feature– The door can be easily removed without unscrewing the hinges.
2. Screw-in (screw-in) consist of two parts with threaded pins, designed for constructions with euro-recess ( with protrusion at the ends) and will fit on either side of the opening. One part of such a loop is screwed into the box, the second - into the canvas.

Note! It is necessary to mount the screw hinges carefully, especially if it is necessary to install the device in a thin web with a euro porch. This is due to the fact that this type of hinge can split the door leaf!

1. Bar (metro loops) open in both directions: outward, inward.
2. Hidden the hinges are invisible when the door leaf is closed and allow for 3-axis adjustment. When installing a leaf with hidden hinges, it is possible to open the door by 180 ° C, which will completely free the opening when bulky things need to be moved.

The main condition for choosing a loop is high quality products. factory products well-known manufacturers almost impossible to render unusable, unlike cheap handicraft iron devices. Therefore, when choosing products, experts recommend preferring products of predictable quality and choosing a material:

• brass hinges are highly resistant to corrosion and abrasion. "Minus" - the brass loop may darken over time.
• Steel- These are products made of high-strength material, resistant to corrosion with a long service life.
• brass-zinc hinges are durable products resistant to corrosion.

The next point to pay attention to when choosing removable loops,– opening side . As a rule, to determine the direction, it is enough to stand in front of the door so that the structure opens “toward itself”, and determine whether it is to the right or left hand canvas will open.

An important factor when choosing loops is the size:

1. H = 7.5 cm is recommended for light doors weighing 10-25 kg - frame, hollow, with honeycomb filling;
2. H=10 cm suitable for standard designs weighing 25-40 kg - frame, hollow, with honeycomb filling;

1. dimensions H = 10 cm at D = 6 cm are designed for heavy doors weighing from 40 kg - frame, hollow, with honeycomb filling.

In addition, when choosing a loop, it is necessary to accurately determine location- normal ( 2 loops), for standard doors (2 top+1 bottom), for light canvases ( 3 equidistant loops). For heavy structures, it is recommended to purchase 4 hinges and arrange the parts 2 at the top and bottom. If it is planned with a height of 2,100 mm or more, then experts recommend ensuring the functionality of the structure by installing 4 hinges.