The minimum width of the wardrobe for outerwear. Dimensions and standard depth of wardrobes. Varieties of wardrobe according to the design
Site search:
Made to order, like any other product, have their own size restrictions. And these limitations are often associated with design or physical features the doors themselves or parts of the body of the product.
Maximum and minimum width.
The maximum length of a sliding wardrobe - is not limited! There can be an arbitrary number of compartment doors in the product. But, here it is important to properly design the sliding wardrobe so that there are no difficulties during assembly and operation.
The optimal width of the compartment doors is 70-90 cm, you can make them narrower or wider, depending on situations, but too wide doors (more than a meter) can deform over time, and too narrow (less than half a meter) are not very stable and can fall out of the bottom rail.
The maximum width of the sliding wardrobe is tied to the length of the guide along which the doors slide! On average, it varies between 4-5 m, depending on the manufacturer. At this length, you can put from 4 to 7 compartment doors. But what if the closet is wider than 5 m?
It is impossible to dock the guides, since the lower wheels in the compartment doors, which will slide at the junction of the guides, will quickly wear out and fail. For this, a chipboard partition is placed between the two guides. As it were, the wardrobe is divided into 2 halves and there are compartment doors on both sides of the partition. There can be an unlimited number of such partitions with guides between them!
Another limitation in the width of the cabinet is the frame elements of the product (roof, floor, false roof, false floor). Maximum dimensions chipboard sheet firm Egger, as you know, 278 cm. Accordingly, a cabinet with a single roof may not be wider than this size. Products outside this limit use the same baffle as described in the previous paragraph.
Simply put, with a very large width, the closet should consist of several independent modules fastened together. The main condition is that compartment doors must be of the same width and in the same style, so that the entire furniture design looked harmoniously, as a single product, in this case, the joints between the modules will not be evident.
The minimum width of a two-door wardrobe should not be less than a meter. Because half-meter doors are extremely unstable, especially if the wheel jumps over the stopper (position lock) in the lower rail. If, nevertheless, there is a need for a cabinet less than a meter in size, it is better to replace the wheels in the compartment doors with swing mechanisms.
Maximum and minimum height.
As already described, the maximum height of the Egger chipboard panel (cabinet sidewalls) is 278 cm. Accordingly, this, as a rule, limits the height of the wardrobe. Usually buyers are limited to this height.
If you need a sliding wardrobe right under high ceiling(above 278 cm), then an extension (mezzanine) is erected on the roof of the cabinet with additional small compartment doors with their own guides. At the same time, the height of the product can reach far beyond 3 m.
If you don’t want to put additional compartment doors on top, then you can limit yourself to single doors to the entire height, but at the same time, the sidewalls of the cabinet with a joint are completed up to the very ceiling. Max Height compartment doors themselves can reach up to 4 meters, provided that the internal inserts (chipboard, mirror, glass, etc.) are divided into fragments.
Maximum and minimum depth.
Restrictions in maximum or minimum depth cabinets depend on several factors:
- What accessories will be used.
If there are compartments with a rod in the closet, then the optimal depth of the closet, taking into account sliding system, should be at least 60 cm, ideally 65 cm, otherwise the hangers will go beyond the cabinet. Many accessories (tie ties, trouser racks, shoe racks) are designed for an overall cabinet depth of 60 cm (including 10 cm for the sliding mechanism).
- Where will the closet be located? In hallways, it is not advisable to use a cabinet depth of 60 cm, since such a product will cover the entire narrow passage in the corridor. There are accessories for narrow cabinets. For example, a retractable end bar, on which hangers hang along the back wall.
The minimum depth of a closet less than 40 cm is also impractical, since the sliding door mechanism takes 10 cm, and shelves less than 30 cm deep are ineffective.
Sliding wardrobes Classico made of solid wood and wood veneer
Classically strict and elegant model sliding doors for sliding wardrobes and niches Classico is a proprietary development of Moderna, based on experience classical masters using modern technologies.
The doors are bound in a classic carpentry way, made of solid wood and fine wood veneer, which gives the appearance of sliding doors special charm and magnificence. basis uprights doors Classico is aluminum profile, which allows them to be made high (up to 3 meters), and also makes them unusually light, durable and makes it possible to use massive-looking doors with conventional wardrobe mechanisms.
Glossy wardrobes in Kazan: Moderno
Design concept of wardrobes Moderno
The main idea of Moderno doors is conciseness and simplicity of forms. In apartments made in the style of minimalism, wide glossy doors without a visible frame can both bring bright accent and merge with the surrounding interior. Moderno suspended sliding doors, despite their apparent simplicity, are a complex structure that ensures their lightness and high strength to the bend.
Radial wardrobes in Kazan: Rotondo
Radial wardrobes Rotondo in the interior: practical value
Radius wardrobes Rotondo - with curved sliding doors - created by the dictates of the times and the most demanding customers. After all, curved and concave radius cabinets are more universally able to use space, emphasize the uniqueness of the design of your home. Graceful lines of curved sliding doors, unique appearance of Rotondo radius wardrobes will give your interior a bright personality.
Classic wardrobe made of MDF in the hallway with golden patina
Wardrobe in classical style in the hallway: MDF, golden patina
Door frame finish:
Outer body finish:
MDF, colored enamel, golden patina, acrylic lacquer
Inner case material:
Egger furniture board
Door inserts:faceted mirror;
Short description:
Cabinet wardrobe made of MDF in a classic style
Sliding wardrobe dimensions (h*w*d):
Cost: 85,000 rubles
Sliding wardrobe white gloss with chest of drawers
White glossy wardrobe with chest of drawers in the hallway
Door trim:
White enamel, glossy acrylic lacquer
Sliding door mechanisms:
Absolute rollers on mortise guides
Frame:
furniture board Egger, 25 mm
Short description:
wardrobe and chest of drawers with high-gloss fronts
Sliding wardrobe dimensions (h*w*d):
Chest dimensions (h*w*d):
Cost: 120,000 rubles
Classic wardrobe: MDF, beveled mirror
Sliding wardrobe in a classic style in the hallway
Door frame finish:
MDF, colored enamel, golden patina, acrylic lacquer
Body Finish:
MDF, colored enamel, golden patina, acrylic lacquer
Door inserts:faceted mirror;
corrugated panel, MDF, enamel, patina, lacquer
Short description:
classic wardrobe in the hallway model Classico.
Sliding wardrobe dimensions (h*w*d):
Cost: 72,000 rubles
Depth of wardrobe
The optimal depth of the wardrobe with hanger bars: 68-70 cm! In this article, we will take a closer look at this important parameter closet dimensions as depth. First of all, let's tell you why. standard wardrobe 60 cm deep is a gross mistake of some manufacturers. Secondly, we will offer solutions for a closet in a shallow hallway: consider situations using retractable hangers, hooks, as well as corner and radius cabinets. Thirdly, we will show several solutions for visually compensating for the wide side panel of the cabinet, more than 60 cm deep. Lastly, consider the effect various systems compartment doors for calculating the depth of wardrobes.
The tasks that we are pursuing by writing this article boil down to an attempt to warn you against purchasing a wardrobe, which will be inconvenient to use in the future due to an incorrectly chosen depth. If the width and height of the closet are usually dictated by the given premises and it is difficult to do something about it, then the depth can be manipulated, and, sometimes, these manipulations end very badly.
Advantages of Moderna
Own production:
- woodworking production
- veneer veneer
- solid wood, veneer and MDF painting
- production of bent-glued blanks
Unique models of wardrobes:
- classic wardrobes made of solid wood, veneer and MDF
- hanging glossy wardrobes
- radius wardrobes
Free services:
- departure for the measurement of a consultant-designer and constructor
- drawing up a project in a computer program
- delivery
- rise to the floor
- assembly and installation
Experienced team of professionals:
- The company has been on the market since 2008
- assemblers have been trained for at least 2 years
- designers and technologists have been working in the industry for over 10 years
Most customers want a complete boom like the picture below. In this case, the depth of the sliding wardrobe is required at least 550mm. Because clothes hangers come with a minimum size of 450mm. (we are not talking about children's hangers).
100mm must be laid on the skids of the compartment doors. So it turns out 550mm., This is the minimum! You need to be prepared for the fact that the clothes will touch the compartment doors when you move them, the hangers will have to be bent to the side by hand.
I think not everyone will like it, especially when you hang something voluminous on a hanger, such as a down jacket or two pieces of clothing on top of each other.
Need to add about 50mm. to the depth of the cabinet, so that the frame occupies 600mm. You have at least 50mm. will be for maneuvering with clothes. Better yet, make a frame with a total depth of 650. Watch the video below.
So remember. If you want a full-fledged bar in the closet, so that it is convenient to hang and take off clothes, so that it is clearly visible, choose a total cabinet depth of 650mm. I repeat once again, provided that the hangers are 450mm in size.
Speaking of hangers. Stores sell hangers for clothes in the following sizes: 450mm., 500mm., 550mm. and for large people 600mm. although it is quite difficult to find this size, but they exist.
What to do if you can’t take more than 550mm under the wardrobe?
Then pay attention to retractable hangers. Personally, I don’t like them, because it’s inconvenient to look for the right clothes, you have to sort through the previous one with your hands. Hanging and taking off clothes from such rods is also inconvenient. If in ordinary life we can quickly open the compartment door by 20cm. and remove your jacket from the hanger, then in the case of the front hanger, you need to move the door completely.
Of course, when there is no choice, you need to put a retractable bar. Then think in advance about the width of the section in which your clothes will hang. It is desirable to make the width of the compartment at least 550mm., And best of all 600mm. You can make the width of the section and 1200mm by placing two hangers in a row. You just need to understand that the top shelf to which the front hangers will be attached can bend in the middle. Of course, we will make a support under the shelf, but often this is not enough with such a width of the shelf. Plus, the load on the shelf will be from above, from the put things.
There is another option for frontal hangers, not retractable. Rear end chrome pipe fastened to the wall, and the front part to the edge of the top shelf.
You can make the width of the section for example 700mm. and place the hanger closer to one of the sidewalls. On the opposite sidewall, you can install hooks for bags, umbrellas and clothes, because it turns out there free space. This option is often used, watch the video.
What is the maximum depth of a wardrobe?
Several times we made cabinets 900mm deep, but remember to reach into the depth of the cabinet through the shelves at 800mm. sometimes problematic, especially at the top of the cabinet. You have to balance on a ladder to reach the right things.
Site search:
When designing a wardrobe to order, either, as well as, in order to avoid different kind inconvenience during operation, special attention must be paid to the correct distribution of internal compartments.
In this article you will find some useful Tips for filling wardrobes.
If you order a sliding wardrobe at a company, then the organization inner space sliding wardrobes will be taken over by specialists who have experience in designing. But if you decide to plan the product yourself, then the tips for arranging the "stuffing" of the wardrobe, presented below, may be useful to you.
- The number of compartments inside the cabinet, if possible, should be equal to the number of doors. It is convenient to use the product when there is a compartment behind each compartment door. The exception is wide doors, behind which you can put 2 compartments.
- It is better to make compartments with bars for hangers wider than compartments with shelves. For example, a section for rods is 90 cm, and the most convenient width for shelves is 50-60 cm.
- The most convenient opening between the shelves in height for storing linen is 35-40 cm, for books 20-35 cm, depending on their size.
- Under the bar with hangers, the optimal opening for short clothes is 80-100 cm, for long clothes 150-160 cm. Ideally, you need to measure the length of the clothes and add about 20 cm to it (this is the total height of the hangers themselves with the distance from the top shelf to the bar itself.
- Large items are usually placed on the top shelf - mezzanine, it is better to make its opening in height 45-50 cm.
- It is better to make the total depth of a sliding wardrobe with longitudinal bars not 60 cm, as is generally accepted, but at least 65 cm. Due to the door mechanism, everything internal filling recessed by 10 cm. Accordingly, the inner depth of the cabinet 50 cm for clothes with coat hangers is a bit small.
- For storage of underwear, I advise you to provide drawers.
- Drawers and accessories always plan so that they do not fall on the frames of the compartment doors or on the hinges hinged doors. They won't move out. In compartment doors, this is a dead zone, which is always closed for any rearrangement of doors, with the exception of four-door compartment wardrobes, where you can open half of the opening.
- AT swing cabinets the door on the hinge side overlaps the opening by 1-2 cm and the sliding mechanisms may also not extend.
- If a handle is planned on the drawer, then the drawer must be additionally recessed deep into the opening so that the protruding handle does not interfere with the operation of the doors. On either front panel drawer to provide recesses for the fingers, grasping which, it would be possible to push the drawer.
- The optimal height of the front panel of the drawer is 20-25 cm, while it must be remembered that the height of the drawer box is often 3-5 cm less than the front panel, depending on the type of guide.
- Drawer guides are better to use ball bearings full extension They are of better quality and last longer. And it is very convenient when the internal content of the drawer is fully extended, and not halfway, as with conventional roller guides.
- If shelves with a width of more than 80-90 cm are planned, it is necessary to provide a partition under it, otherwise it will bend under the weight of things. If rods for clothes with a length of more than 100-120 cm are planned, I advise you to provide the same vertical rod, which rests on the floor with its lower end, and against the shelf above the horizontal rod with its upper end, and these 2 rods are interconnected with special fasteners.
- If you plan to supply any accessory (trouser, tie, shoe rack, baskets), always specify their size ranges and mounting openings, otherwise they may not fit into the planned compartment in depth or width.
- Lighting inside the cabinet is not recommended, as it will only illuminate the top shelf. It is better to provide for this a remote roof visor, where halogen lamps are mounted.
- If a large mezzanine is planned in the closet, I do not advise making separate sliding doors for it. Firstly, this is a significant increase in price due to additional sliding doors, and secondly, sliding wardrobes look much more beautiful if the doors are at the full height of the product. Make a mezzanine shelf behind a common door.
- Never do empty openings with rods in the extreme compartments of a free-standing wardrobe, otherwise the left or right side panel may simply fall off from door strikes. Always provide shelves, they tie the last sidebar cabinet with the whole structure.
Here are some basic tips for filling sliding wardrobes. In fact, there are a lot of pitfalls when designing furniture. It is better to entrust this work to specialists.
For consultation, you can call us at 8 499 409 60 55 or contact us at e-mail [email protected]
When choosing furniture, first of all pay attention to its appearance- materials, finishing... What else is important? They measure the room in order to figure out whether the sofa will pass through the doorway, whether a new wardrobe or bed will fit in the room, whether there will be enough space for new furniture with the existing arrangement or something will have to be moved ... At the same time, they often forget about another point that is associated with furniture sizes.
This is ergonomics. Beautiful furniture, which fits perfectly into the interior, is the dream of any housewife, but imagine that it’s uncomfortable to sit at a new table: you have to bend over the countertop, and this is so bad for your spine ... Or in a newly furnished kitchen you constantly need to stand on your toes to reach plates on top. And in the new closet, no matter how you arrange things, they are not at hand and not in order. A mess in the closet is a mess in life: in the morning, the preparations are delayed, and then the whole day passes in a hurry. To prevent this from happening to you, plan the size of the closet wisely.
Width
P The first and simplest parameter: the useful width of the cabinet is its entire width, except for the side and internal racks, but there is an insignificant error of 5-7 centimeters.
The width of the cabinet mainly depends on the number of doors: for 2-door cabinets optimal width- from 100 to 160 cm, for 3-door - from 150 to 240 cm. This is due to the fact that the width of the door cannot be less than 50 and more than 100 cm: doors that are too narrow or too wide sooner or later begin to sag under their own weight . The optimal width is 60-80 cm. For ease of use, there are usually as many doors as there are sections. Therefore, to begin with, decide on the number of sections.
When ordering a cabinet, the width of the sections is most often adjusted to the contents: what things will be stored in the cabinet and how many there will be. At the same time, the optimal width of the section is the same 60-80 cm, maximum - 90. Very wide shelves and long rods need support in the form of partitions and rod holders, which is not always convenient.
Therefore, for serial cabinets are calculated optimal parameters: 2 or 3 doors, width from 100 to 240 cm. Such a wardrobe is convenient and roomy: things on the shelves can be arranged in two rows, and all your jackets or outerwear of the whole family can easily fit in the compartment with a bar.
Height
At Most modern wardrobes have a separate plinth (or podium). Thanks to the plinth, the cabinet can be placed close to the wall or in a corner without removing the skirting boards and without sawing the baseboards. In this case, the height of the base must be subtracted from the internal height.
The classic height of serial cabinets is 220 or 240 cm. But do not forget about the filling.
Optimal Distance between shelves: 30-35 cm is enough for everyday clothes, for voluminous bed linen- 35-40 cm, for shelves for out-of-season outerwear, sports equipment, bags and suitcases (mezzanines) you need a height of 45-50 cm. At the same time, you should reach the very top shelf by standing on a chair - then upper shelves will be used, not left empty and covered with dust. The same applies to the bars if they are not equipped with pantographs. The height of the rods depends on the length of the clothes: for blouses, jackets, jackets, 80-100 cm is allotted, for dresses - 150-160 cm. cm. The exact height is usually calculated by adding a margin of 20-25 cm to the length of the clothes so that the clothes do not touch the floor (if there is one bar) or another bar (if there are two of them in the section, one above the other). Drawers are placed no higher than 120 cm from the floor, so that it is convenient to pull them out.
When choosing the height of the filling elements, focus more on your height, because average numbers are used in the calculation of the wardrobe parameters.
Depth
FROM Serial cabinets are designed with a classic depth of 60 cm or with a reduced depth of 45 cm. They have an important difference - the location of the rods. If the depth is standard, the bars are parallel to the back wall. If the reduced one is perpendicular, things on such rods hang "face" to the doors, and this must be taken into account when planning the width of the section.
Convenient shelf depth - 60 cm. Built-in wardrobes can have a maximum of 70 cm. To make the cabinet convenient to use, you must reach rear wall- then things in the second row are easy to take and put in place.
Even when designing a cabinet, it is worth remembering that the sliding mechanism of compartment doors takes up to 10 cm of depth and the useful depth of the cabinet is reduced by exactly the same amount.
Therefore, the optimal depth of functional and spacious closet- 60 cm. Sliding wardrobes with a depth of 45 cm are suitable for small hallway or narrow corridor.