APS - reliability, proven by more than one generation of car owners. APS alarm - a simple and reliable anti-theft system in operation

APS car alarm Model 9000 can be standard installed on any car. Owners usually do not have questions about how to disarm the car or how to turn it on - one button is responsible for both actions. Another thing is that you can quickly turn off the security by pressing the button, which is located inside the cabin. So it says in the instructions, but here it is proposed to improve secrecy by setting private idintifier. It will also be considered how to control the Valet mode, including without the use of key fobs. Enjoy reading.

Personal code setting

Prior to the advent of the 9000 series, there were no programming tables in the instructions for APS signaling. They were not needed: any option was in one of two states (on/off). The 9000 family is programmed differently: “value 1” corresponds to the “lock” key, and pressing the “with speaker” button sets the values ​​\u200b\u200b2, 3, and so on. All parameters are now collected in the table at the end of the chapter.

APS signaling control panels

Be aware that the default is always "number 1". It will be possible to set it again by pressing the “lock” key during programming.

Change the value of option 8 - set any of the numbers from 2 to 9. First, the programming mode is activated:

1. It is necessary to disarm the system;
2. The ignition is turned on, the service button is pressed 6 times;
3. Turning off the ignition, you can hear 6 beeps;
4. The service button is pressed 8 times, as option 8 is being set;
5. Short presses on the “with speaker” key set a new value (2..9).

Without changing anything for more than 10 seconds, the programming mode is turned off. Keep this in mind as you move from step to step.

All presses should be short, but measured - pause for 2-3 seconds. In the standard instructions, of course, this requirement is omitted. To disable the use of the code, in step 5, press the "with lock" key - the value should return to "1". We wish you success.

Display indication

Disable Valet mode only programmatically - removing the terminals from the battery does not lead to anything. Let's see how to turn it on.

Valet mode can be enabled

1. Disarm the system;
2. Turn on the ignition;
3. 15 seconds after step 2, you need to press the service button for 2 seconds;
4. The LED will turn on permanently.

Exactly as mentioned above, the Valet option is activated. If you do not want to look for a service switch, use another method. It is considered further.

So, if the key fob is available, do the following:

1. The first two steps will be as already indicated;
2. 10 seconds after the ignition is turned on, two buttons are pressed and held for 3 seconds: “lock”, “speaker”;
3. The required mode will be enabled.

Let's say the following keys were pressed: "speaker", "trunk". Then the Anti-Carjack function is activated. And you can turn it off only with the service button.

Anti-Carjack is disabled as follows: turn off and turn on the ignition, then you need to enter the code. Its value, as everyone remembers, is set by option 8.

Service key in the car

About disabling Valet mode

Here is a guide for all cases:

1. Turn on the ignition;
2. Within 10 seconds, press the "lock" and "speaker" keys, holding them for 3 seconds;
3. If the key fob was lost, instead of step 2, another action is performed: within 15 seconds, press the service button, holding it for 2 seconds;
4. The diode will go out, the “key” will disappear from the display, the system will switch to the “Disarmed” state.

By following the steps in the list, you can quickly disable the Valet mode. The code is not used here. And you need to use it in another case: if the security is turned off, and the remote control does not work.

We give the sequence of emergency disarming: turn on the ignition, dial the code in 15 seconds. The code itself consists of a number, so there will be no problems here.

All wired button functions

The service button is then needed to perform one of the following actions:

1. Enable or disable Valet mode;
2. Enter the code;
3. Execute programming;
4. Enable or disable daily autostart or start by temperature.

Point 4 corresponds to the sequence: turn off the ignition, press the button 4 or 5 times, turn on the ignition. With a single press, the option is switched to the “active” or “off” mode.

Reminder to point 4

5 clicks to set temperature trigger. The double signal, in turn, corresponds to the value "off". Good luck.

APS "below 9000" - hacked

For any car owner, safety issues of their own vehicle are quite sharp. After all, a lot of money, effort, nerves and even a piece of soul has been invested in the car. Therefore, the choice of car alarms is always given great attention. The electronic guard not only prevents unauthorized and illegal entry into the car, but also provides peace, confidence and security to its owner.

Such a security system as aps alarm, instruction positioned as one of the most reliable and easy to operate security devices. To this we can add that it is also extremely popular and well-established among Russian motorists. It combines in an incredible way:

1. High quality
2. Excellent reliability
3. Wide functionality
4. Easy to install
5. Operational convenience

Easy programming aps alarm instruction is another characteristic this type of electronic guards. Due to the combination of the above qualities, it is stable in last years holds leadership in various sales ratings in Russia. Besides, Various types and modifications of APS alarms are specially adapted to the specific conditions of the domestic market, which only adds to their whist and popularity.

A bit of history

Abbreviation APS stands for Advanced Programming Systems. Such electronic cerberuses, recognized as sacred to guard the safety of cars, are created by a small research and production company from the United States. It has long been working in the field of creating and implementing various electronic systems and computer software, having a fairly serious scientific and technical potential.

In the early nineties, this company decided to test its strength in the development of security devices. As a result, it mastered the production of simple and fairly cheap automobile anti-theft devices. Instructions for APS alarms were so clear and understandable that even a beginner could understand them. However, at first the geography of distribution of such products was not too extensive and did not go beyond the borders of both Americas. Anti-theft systems of the company were supplied mainly to:

1. Mexico
2. Canada
3. Brazil
4. Argentina

In 1994, the Advanced Programming Systems company began to cooperate with the Russian company MMC, which introduced the products of the American partner to the domestic market. It should be noted that only the second generation of overseas anti-theft systems, starting with the APS 1000, has become widespread and has become a sales leader. Models previous episodes were not fully adapted to Russian conditions. Today, almost all modifications of APS anti-theft devices are characterized by ease of installation and ease of operation. Therefore, they can be recommended for self-installation.

APS alarms: instructions and overview of models

Today, dozens of models are produced under the Advanced Programming Systems brand. various characteristics, design features and operational specifics. However, they are all united high level reliability and excellent functional parameters. The most popular and in demand now are the following models:

1. Anti-theft device model APS 5100. This is the most popular budget class security system. active zone her key fob's signal reception is nine hundred meters. This modification is equipped Anti-theft function "Anti-Carjacking", advanced "Panic" mode, the possibility of silent arming and disarming
2. APS 5200. Distinctive characteristics of this model are such a set of functionality as a loud warning siren, an immobilizer with a pair additional channels, two-level impact sensors, built-in pager. In addition, it is equipped with a four-button programmable key fob transmitter with the ability to feedback and LED display, starter blocking function, built-in relay and much more
3. APS 1650. This multifunctional programmable electronic guard belongs to the category of expensive elite models. It has a thin original two-button key fob with the ability to automatically reprogram any protective functions, siren settings and shock sensors.

As for instructions for APS alarms, then for each specific model there is its own operating manual and information about the installation, which describes the features of this modification. In general, this is not an area in which versatility is good.

However, any model of the electronic guard released under the brand name "Advanced Programming Systems" is able to provide reliable protection vehicle and peace of mind to its owner.

This system is designed and manufactured taking into account the wishes of Russian customers and is simple and reliable in operation. And thanks to the use of a modern industrial-type Microchip microprocessor, alarm programming becomes convenient and easy. The anti-theft system configuration reduces the need to change the system settings to a minimum and can be installed on almost any type of car.

In the anti-theft system A.P.S. 1500 is everything necessary functions: dynamic code, built-in starter blocking relay, the ability to connect 2 more additional engine blocking circuits, 2-level shock sensor with the ability to remotely disable, Valet switch(service mode), built-in relays for controlling door locks and car direction indicators, 2nd channel output, the ability to control the interior lighting of the car, Anti-Carjacking, anti-theft protection mode false positives, "Panic" mode, "search", a number of programmable functions and much more.

List of the main functions of the A.P.S. 1500:

• Two 2-button, 3 channel programmable key fob transmitter
• Dynamic code Keeloq
• Anti-theft function "Anti-Carjacking"
• 2-level shock sensor
• Powerful siren included
• Starter interlock with built-in relay
• Output for additional blocking of the engine
• Possibility of connection of the 3rd chain of blocking of the engine
• Built-in relays for door lock control
• Built-in relay for control of right/left direction indicators
• The ability to control the "polite backlight" of the car
• Switch "Valet", service mode
• Multi-Function Alarm Status LED (LED)
• Advanced Panic Mode
• Silent staging and disarming the system

Programmable functions of the A.P.S. 1500:

• Automatic arming with door locking
• Automatic (passive) arming
• Automatic locking / unlocking of doors when the ignition is turned on / off
• Output pulse to door locks 1 or 4 sec.
• 30 second delay before arming *
• Programming the output functions of the 2nd channel of the system
• Arming with disabling the shock sensor
• Operational temporary disabling of automatic arming
• Disabling the alarm mode in 2 steps
• Valet Service Mode Enabled Warning
• Protection against false positives of car alarms
• 2nd channel output (for unlocking the trunk or for connecting additional accessories)
• Limited time alarm mode
• Light and sound signals confirmation
• System alert
• Specifying the sensor or trigger that triggered the system
• Indication of system malfunctions
• Bypass faulty zone or chains
• Positive and negative door trigger inputs
• Hood/trunk trigger input
• Saving the system state when the power is turned off

* for installing car alarms on cars with a delay in turning off the interior lighting of the car

3 main components of the A.P.S. security system 1500:

• Keychain transmitter
• Led indicator System Status (LED)
• Service Mode Switch Valet

Consider these components of car alarms in more detail:

1. Keychain transmitter with a dynamic code.

   The car alarm kit includes two 2-button key fobs with a dynamic code based on the Keeloq microprocessor. Each time you press the transmitter button, the code will automatically change randomly. Thus, your system is protected from attempts to "intercept" the code of your transmitter using a grabber code.

   During operation, a very rare situation may arise when the codes of the key fob transmitter and the main unit of the system are out of sync. Such a situation may, for example, occur if you have pressed the transmitter button more than 30 times away from the vehicle. In this case, you only need to approach the vehicle and quickly press the transmitter button twice.

   There are two buttons on your transmitters: Big left button and Small right button. The functions of these buttons are shown below:

   Big left button- used to arm and disarm the system.

   Small right button- used for silent arming and disarming of the system, for controlling the 2nd channel output, and, together with the Big Left Button, for arming the system with disabling the shock sensor.

   Both buttons pressed together- control the remote mode "Panic" and turn on anti-theft function Anti-Carjacking.

2. System Status LED (LED).

   LED informs the owner of the car about the status security system and indicates the zone or trigger that last triggered the system.

3. Valet service mode switch.

   This switch allows you to temporarily disable security functions system (transferring the system to the Valet service mode). It is also used together with the ignition key to emergency removal systems to disarm in case of loss of a transmitter, to disable the Anti-Carjacking mode and to program new transmitters.

One of the popular protective systems alerts in Russia is the APS alarm, which is valued by vehicle owners for affordable price, reliability, ease of installation and operation. Security complex APS was developed taking into account all the requests and wishes of users, as well as using innovative technologies. Home hallmark presented equipment from other car alarms is the ease of programming the system.

It is known that with the help of the Microchip microprocessor, the APS alarm is switched to silent mode by pressing the corresponding buttons on the key fob. The presence of this function allows unnoticed by unauthorized persons to put the object under protection.

What is the model range of the APS warning system?

Today, the APS product range is represented by several dozen different models that differ technical indicators and feature set. However, it should be noted that all models are united by versatility and high degree reliability. Among the modifications APS alarm The following devices are in particular demand:

• APS 5200;
• APS 5100;
• APS 1650.

APS 5200 is equipped with the following mechanisms:

• Siren;
• Two-level type sensors that respond to shock;
• Anti-High Jack system;
• An immobilizer equipped with two additional channels;
• Built-in pager;
• Additional installation kit with various devices.

The APS 5100 model is considered to be a budget model, however, by installing it, the user gets almost the same functional set as the APS 5200.

The difference is only in the presence of a passive pager equipped with a power output, as well as the possibility of feedback.

The APS 1650 warning system is presented in the form of an original thin two-button key fob that has the ability to reprogram the alarm in automatic mode, including siren settings, as well as shock detectors. Each model is supplied by the manufacturer with instructions for operating and connecting mechanisms.

On the video - an overview of the alarm:

How to connect an APS alarm?

Scheme of connection of APS signaling mechanisms in single system quite simple, and the owner can independently install and configure the equipment. The main thing is to follow the provided algorithm of actions:

• Installed central block in a free compartment behind the instrument panel;
• The siren is fixed in the engine compartment in such a way that access to it by unauthorized persons is difficult;
• Sensors are connected inside the cabin: next to center line car;
• Trunk (hood) limit switches are installed with the calculation of the free play of their stem somewhere in 6 mm in order to avoid false alarms systems;
• The device for receiving and transmitting a signal is located at the top of the windshield, given that the distance between the antenna and metal parts body must be at least 5 cm;
• The secret button is connected in a place invisible to unauthorized persons, however, so that the driver can easily reach it;
• The light indicator must be installed in a place visible to the intruder.

All wires are connected by color according to the scheme for connecting mechanisms that comes with the equipment.

Function emergency shutdown system can be used if you have lost or forgotten your key fob transmitter, or if the key fob transmitter is not functioning properly (for example, the battery is dead), as well as to disable the Anti-Carjacking mode (see below). How the system will shut down in an emergency depends on the status of programmable feature #10: shutting down the system is done by pressing the Valet pushbutton or by entering your personal shutdown code. Your personal system shutdown code can be any single digit from 2 to 9, the procedure for programming a personal code is described below in the “Programmable System Features” section.

System Emergency Shutdown with Valet Pushbutton Switch (Feature #10 Enabled)

2. Turn on the ignition.

3. Within 15 seconds, press and release the Valet push button switch.

4. The alarm mode will turn off and the system will disarm.

Emergency shutdown of the system using a personal code (feature # 10 disabled)

1. Open the car door. The system will work, the siren will sound immediately, the direction indicators will flash, etc.

2. Turn on the ignition.

3. Within 15 seconds, press and release the Valet pushbutton a number of times equal to your programmed personal code.

4. If the correct personal code is entered, after a few seconds the alarm will turn off and the system will be disarmed.