How to sew up a leather sofa: several ways to update furniture. How to patch a leather sofa

Cut off a piece of material for the inner patch. On deep tears and cuts that expose the interior padding of the sofa, you need to use patches to create solid foundation further repairs. In a special leather repair kit, you will find not only the material for making patches, but also everything else you need. If you do not have such a kit, then for a patch you can take any durable elastic fabric or a piece of leather or vinyl. Cut out the patch so that it is slightly more hole or a cut. Round the corners of the patch to make it easier for you to insert it inside.

Put a patch under the hole. Using tweezers, insert the patch into the hole in the skin, and then straighten it under the hole from possible wrinkles and folds. Make sure that the patch completely covers the hole and lays flat between the sofa's upholstery and its leather surface.

Glue the patch to the skin. Take a large needle or toothpick and apply plastic fabric glue or special leather glue to the underside of the leather upholstery around the hole. Spread the glue thin layer over the entire surface that will be in contact with the inner patch. Press the leather upholstery of the sofa against the inner patch, aligning the edges of the tear or cut and returning them to their original position. Wipe off excess glue with a paper towel.

Place the weight on the area to be glued while the glue dries. Apply a heavy piece of wood or a book to the bonding area to apply even and strong enough pressure. Wait at least 20 minutes for the glue to dry (check the specific time on the instructions).

• Read the directions on the glue bottle label to see if a blow dryer is needed to speed up the drying process. If necessary, set the hair dryer to low temperature heating and try not to bring it too close to the leather upholstery. Excess heat can damage the skin.

"Help! - write visitors to various handicraft and furniture forums, - the upholstery has sold out! How to sew up a sofa along the seam so that it is invisible? Let's answer honestly: if your family does not have a professional furniture maker, then in general, no way. Of course you can try. After all, sometimes accuracy, diligence and love for your furniture can contribute to a miracle. So, first we try to fix the problem on our own.

We sew the sofa ourselves

There is a strict sequence of actions, following which a sufficiently dexterous person can dock parts of the sofa upholstery that have come apart at the seams. Here's what it looks like.

• Pick up threads, but not in the color of the upholstery, but exactly in the color of the threads of the seams. It is desirable that the thickness and texture match. This is quite simple to do by cutting off a small fragment at the place of the parted seam. With a thread, you should go to a sewing and needlework store. There, experienced consultants will help with the selection.
• In the same store you can buy a set sewing needles. The main condition is that the diameter of the working needle does not exceed the diameter of the holes from the factory machine. So the home seam will be almost invisible.
• Google the tech blind seam". There are master classes on the Internet in both video and photo formats. This greatly simplifies the process.
• Ask someone at home to be your assistant. It is necessary that a person carefully pull the edges of the parted seam together and keep them connected while the restoration work is in progress.
• When sewing, use only the holes of the factory needle.
• Having reached the preserved original seam, make a couple more stitches along it, then the junction will not be a risk point for a new hole.
• Gently pull the threads, check that there are no wrinkles anywhere.

And a secret trick: find a hand moisturizer around the house. To test, smear some inconspicuous place on the couch with it. Wait for absorption. If a greasy spot will not be in this place, feel free to smear the place of restoration. So the skin will lie more softly and naturally.

Not all resources are good

If in the case of a parted seam it is still possible to somehow repair the damage on your own, then more radical damage requires professional restoration. How to sew leather sofa if the skin is torn, burned, cut, stretched and torn?

There are several options.

• If there is a small piece of leather from the same sofa, slightly larger than the cut, then it must be carefully pushed under the upholstery. Next, the lining from below is smeared special glue and tightened by hand. It is advisable to hold the screed with your hands as long as possible.
• A rounded hole is already a job for liquid skin. You should purchase a set, mix the colors until you get the desired color scheme and carefully fill the hole with the compound.

These methods have a lot of nuances and give more satisfactory than good result. Indeed, in the first case, the junction of the gap will be quite noticeable, and in the second it is necessary to ideally choose the color of the color scheme, which is almost unrealistic, since in the liquid and hardened state the repair material has varying degrees brightness.

Contact the professionals!

If you have doubts about your own competence or funds, it is better not to risk such an expensive thing as a leather sofa. And without the risk of coping with holes, scuffs and other skin defects, the specialists of the Fenice-TM company can do it. Unique Italian technology, appropriate equipment and materials make it possible to obtain perfect result at minimal cost.

The Fenice-TM company offers:

• putty cracks,
• leather polishing.

And if the sofa, according to experts, is not subject to cosmetic restoration, you can save it by a radical measure - changing the upholstery. The professionals of our company will help you create a new leather outfit for a sofa, armchairs and any other interior items. Contact us!

But years of service, restless animals, children and guests can do the seemingly irreparable: tear upholstery. Gaps, holes, accidental cuts, and now we will close them up so that there is no trace left. And we do not need any professional at hand.

Prepare: a couple of hours of free time; a round leather patch cut from thin but strong and elastic leather remnants; scissors; cleaner on water based, safe for leather materials(oil-based products just won't grab onto the skin); hair dryer that lasts long enough long work nonstop; water-based adhesive, safe for leather materials; skin-friendly dye or several for mixing (matching the color of the upholstery); glass jars for mixing paint; paint sprayer or wide brush.

Cleaning

The entire area at the break and wide around it with a water-based (!) cleaner that is safe for leather materials. When buying such a product, look for the inscription "leather safe" or "safe for skin" on the packaging.

Drying

If it's not humid outside, air drying (or naturally drying indoors) is the best option, but if time is running out, a hair dryer with careful use (i.e. on the most low settings and keeping the device away from the skin) will also work. Be careful, you don't want your leather to dry out and wrinkle (forever!) with high heat. It is best, in principle, to use a hairdryer with a diffuser: it will help to better control the flow of hot air. Allow the washed area to dry completely.

Now let's all fix it up

The next step is to insert the cut-out circle of leather between the padding (or inner layer) outerwear) and back side torn leather surface. Always make sure the patch is noticeably larger than the gap. Never use rectangular or square patches: it is much more difficult to disguise sharp corners under a leather surface.

To find a patch, go to second-hand shops: look for cheap leather skirts in them, which are usually made of very thin leather, nevertheless, reliable and elastic.

glue

Use a water-based adhesive that is safe for leather materials, fixing the patch under the upholstery / surface. Make sure to always use a water-based adhesive! Don't be afraid to apply multiple layers of glue. You can always erase any excess once the patch is securely in place.

Masking the patch

If you happen to be dealing with a clean and straight (up-and-down) incision, accidentally created by a mishap with a razor blade or knife, then simply glue the two sides of the incision together - with the same water-based glue. In many cases, here the result will be almost perfect. Then you can skip steps 6 and 7 and continue with step 8.

Mixing paints

If the damage on the leather upholstery/surface is wider than the cut, use the paint described above. But there are some difficulties here: not a single color will fit right out of the bottle right away. You will have to mix several dyes in a separate glass jar (perhaps by trying different colors in minimal portions) in order to get the same shade if you want the sofa / jacket to really look like new after repair. But it's not science: you'll just have to practice mixing until you get it right. Thin the paint with a small amount of water so that the former is easier to splatter or apply (whether using a spray gun or choosing a brush).

Clue: large quantity shades of paint can be found in art stores.

Applying paint

The paint will work like a filling. The sprayer, of course, is better - the paint will sit better, smoother, denser. They cost about 2-3 thousand rubles, or you can generally find a nozzle for 400 rubles. If you have chosen a brush, then you need a brush with soft bristles. Apply upper layer paint that seals and seals the gap and guarantees that area is resistant to abrasion and fading.

Hint: decorative fluting process (airbrush retouching)" orange peel"over the drying paint will help smooth out any possible imperfections.

Completion

Apply several coats of paint to the gap and the surrounding area. This will help smooth out the difference in tide between the original material and the patched area. So even if the shade of paint you mix is ​​a little off, the repaired area will be visually invisible to the untrained eye. Let air dry (now only and exclusively in the air, i.e. in a natural way indoors, for example). Using a delicate and fine skin, remove any imperfections, and your treasure in soft leather upholstery already looks like new!

Has a hole suddenly formed on your favorite sofa? Do not panic and sound the alarm. Almost every stain can be removed, and a hole can be patched. In this article, we will tell you how to sew up a sofa and get rid of this trouble.

How to sew a sofa with your own hands

After using the sofa for a long time, you can see how some parts of it begin to tear. Most often it is the back and armrests. Sometimes the best option will purchase a new new sofa, especially if the damage is very noticeable and it will not be possible to save the upholstery. But if the sofa is very dear to you, and the holes on it are small, then you can correct the situation with your own efforts.

In order to get started, you need to purchase a thermal fabric that matches the color of the upholstery (or vice versa bright shade if there is more than one hole and you want to create an interesting decorative effect on the couch with a few patches).

Let's proceed directly to the restoration. First you need to cut a patch of the desired shape and right size. Next, you need to make a basting using a thread and a needle, and walk along the resulting patch with an iron. You can patch a hole on the sofa using various pieces of fabric with and without bright ornaments. This will allow you to create a truly unique design and update the boring look. upholstered furniture.

Patches can be placed randomly or strictly according to symmetry, it depends on your imagination and on overall design rooms, because everything should look harmonious and tasteful.

In order to correct the shape of the back cushions or armrests, you can use special pads. They can be both fabric and made of other materials, such as metal, wood or artificial stone.

“How to sew up a sofa along the seam?” - you ask. This problem is very easy to solve. To fix everything, you need to choose a piece of fabric that matches the color of the sofa upholstery. Use your needles to flatten the fabric from the inside, carefully threading them through the slit. Then take a needle and thread and carefully sew first one side, then the other. Try to fasten as close as possible to the slot, grabbing it back to back. At the end, go around it with an overcast seam. This will help ensure that the fabric does not tear in the future.

How to sew up a cut on a leather sofa

If the leather sofa has got cracks small size, then use a piece of leather in the same shade as the upholstery and push it through the center of each of the cracks. It is worth noting that the piece of leather for the patch should be slightly thicker than the upholstery. This will keep the elasticity of the fabric. Otherwise, new cracks may form.

You can also apply a product called "liquid skin". Pick it up according to the color of the upholstery and use it like this:

1. degrease the area of ​​the sofa where you will apply the product, for this you can use a cotton swab dipped in alcohol;
2. carefully place the “liquid skin” into the hole;
3. take a clean napkin and press down on top of it;
4. go iron.

If you have ideally chosen the right shade, then the hole will disappear instantly, leaving no trace. How does "liquid skin" work? The process of its work lies in the fact that it completely fills the hole and straightens under the action of high temperatures. This contributes to the fact that the upholstery of the sofa looks solid.

How to mask a hole

In order to externally hide damage to the upholstery, you can use a beautiful blanket or decorative cape. They are able not only to hide a hole, but also to supplement appearance rooms, adding an interesting twist to it.

There are special covers that are sold in furniture stores. You can buy several different types and change them according to your mood. Moreover, these covers are very easy to care for.

At major damage you should think about completely pulling the sofa. Masking methods in this case will be inappropriate. You can do this at home, or you can seek help from specialists. If you know how to handle tools and have free time and a desire to do something with your own hands, then do your own hauling. There is a lot of information and videos on the Internet on how to drag furniture yourself. Otherwise, professionals will do everything quickly and efficiently, but you will have to pay a certain amount of money for this.

Dmitry Chief Technologist HEGGI

If the hole is not large, then it can be repaired with special liquid leather or darned. But if the hole has formed more than 5 cm - believe me, it is better to fit your furniture again.

The classic said that "nothing in the world lasts forever"! Unfortunately, this statement applies to absolutely all people dear to our hearts, as well as objects that mean a lot to us, including our favorite furniture that has been surrounding us at home for many years.

Timely cleaning and disinfection of cabinet and upholstered furniture are mandatory elements. But there are situations when little depends on the owner of the product (one of the guests burned the sofa) or he notices complex pollution too late. A hole in the upholstery of your favorite armchair or expensive sofa can be a particularly unpleasant moment!

How to fix a hole in a sofa?

If it is of considerable size, then it makes sense to think about a complete replacement upholstery material, however, this process requires, as you yourself perfectly understand, the intervention of a professional, whose services can be expensive. At the same time, you do not have to take your upholstered furniture to the workshop (this, by the way, is also an additional material expense) - today it is possible to call a furniture master to your home, where he will do his job.

Another solution to this trouble is an ordinary blanket. Pick up an upholstered furniture cape at the nearest textile store and cover the sofa seat with it. If neither method suits you, you can use the following useful advice. Elimination of a hole in upholstered furniture products, first of all, depends on what material is upholstery. It can be fabric, natural or artificial leather, suede and much more.

There are a considerable number of special solutions and devices designed specifically to remove damage from the surface of upholstered furniture. These include the so-called "liquid skin". This special solution has the consistency of a paste. It is carefully laid in the hole on the sofa and pressed with a dry napkin. Then an iron is placed on it (1-2 seconds is enough). After these actions, the napkin is removed, and if the color of the “liquid skin” is chosen correctly, then nothing will be noticeable at the place where a hole gaped a couple of minutes ago - the upholstery is like new! The principle of operation of this method is simple - the paste fills the hole and melts under the action of high temperature, after which the surface looks solid and undamaged.

You can also try sewing up a hole in the upholstery yourself at home. How to sew up a hole in a couch? - it's not difficult, but only get down to business if you are confident in your abilities, otherwise you can ruin everything even more. Take a piece of the same or similar upholstery fabric and patch it up. Remember that the stitches should be small and "hidden" (invisible to the human eye). In this case, you need to use only special furniture accessories for sewing: threads, needles, etc.