Do-it-yourself lamps and lamps from plastic and glass bottles. Original do-it-yourself lamps from various bottles Plafond from a bottle with your own hands

Decorating a home is a complex and responsible task that you can handle on your own. The peculiarity lies in the fact that some interior items can be created with my own hands. So, lamps are integral interior items that are used to illuminate the room as a whole or separate zone. The store offers a wide range of such products. But there are master classes on how to make a lamp with your own hands from a bottle. And now we will show them to you! :)

How to make a chandelier (master class!)

The main lighting device in the house is the chandelier. You can make it from an ordinary glass bottle. The main thing is that it will be exclusive.

To create such beauty you will need:

  • bottles (size and quantity depends on the preferences of the owners);
  • protective equipment (glasses, mask and gloves);
  • glass cutter and sandpaper;
  • screwdriver and wire.

Having at hand the necessary tools and materials, you can proceed to the direct manufacture of the chandelier:

1. Soak the bottle in water. This will make it easy to eliminate labels and debris. After cleaning, the container must be thoroughly dried.


Wash bottles and remove labels

2. Cut the bottle. The glass cutter is mounted on required level. Cutting is carried out slowly, which will allow you to get a smooth cut line. Work with the cutter only in protective clothing. If not at hand necessary tool, then the cut of the glass bottle is easily done with a thread. The video below clearly demonstrates this.

3. Now bottle under the tap. Turn on hot water and hold the workpiece under it. hot water alternate with cold. As a result of sudden changes in temperature, an unnecessary piece will fall off exactly along the cut line.


4. The cut point is processed sandpaper. The cut must be even and smooth.

5. Using a screwdriver, the lamp is disassembled. The wire must be carefully pulled out and passed through the neck, assemble the lamp back and check it in operation.

6. It remains only to decorate lighting fixture. For this, ordinary wire is used. Starting from the neck, we wind it around the bottle. For this, any material is used. It can be plain black or colored wire.

The chandelier hanger is ready. It remains only to install it. If desired, the product can be painted and given any design. The main thing is that it is organically combined with the interior of the room.


A good solution would be to use a glass stone. In this case, it should be borne in mind that the light transmission of the product will decrease slightly. For decoration, a stone of various shades is used. You can combine several shades. The main thing is that the lamp looks organic.


The stones are attached to the glass with glue. The lamp can be used only after its complete drying. This will take no more than a day. Complete drying of the glue will ensure reliable adhesion of the stone to the surface. It is better to use an adhesive composition that can withstand temperature changes.

Table lamp (master class!)

The glass bottle will become ideal material for creating table lamp to the bedroom or living room.

For this you will need:

  • a bottle of the appropriate shape and size;
  • diamond drill;
  • shade;
  • screwdriver;
  • Remedies;
  • old towel;
  • patch;
  • Wire with cartridge.

Making a lamp from a bottle with your own hands is carried out in the following sequence:

  1. Mark a hole on the workpiece through which the wire will pass. Stick a patch on the mark.
  2. Place the bottle on an old towel and drill a hole for the wire. Drilling is carried out using a diamond drill. The work is carried out in protective equipment.
  3. Soak the finished bottle in water and remove all stickers and dirt.
  4. A wire is passed through the hole and stretched to the neck. At the exit, it connects to the cartridge.
  5. Attach the cartridge and lampshade to the neck.

Homemade glass bottle table lamp is ready. It remains only to check it in operation. If desired, the product can be decorated and decorated. For this, various technologies and materials are used. original solution glass stones will become, especially if the room is installed glass chandelier made using the previous master class.

Now you know how to make a bottle lamp. Most often, wine bottles are used for the manufacture of such devices. They have different sizes and shapes. This allows you to build an exclusive item that will become a decoration for the room.

Plastic lamp (MK)

Plastic bottles are also widely used for the manufacture of lamps. The peculiarity of this product lies in the ease of installation and lightness. It is easy to make such a lamp from plastic bottles with your own hands. Today, there are several technologies that create original lighting fixtures. Let's start with a simple method.

To make a lamp you will need:

  • 5 liter plastic bottle;
  • stationery knife;
  • glue;
  • disposable spoons.

Manufacturing process:

1. With a knife the bottom is cut off. The cut must be even. In the future, this will simplify the work with decoration.


2. Handles cut off spoons. With the help of glue, the convex parts are glued to the workpiece. You need to start from the neck. Each subsequent row should overlap the previous one.

To create an original table lamp with your own hands, a variety of glass bottles are used, both from alcohol and from other products. The most important thing is that the shape of the bottle is unusual.

Table lamps not only look beautiful, but are also an environmentally friendly way to reuse"household trash". This lighting fixture is very reminiscent of.

This handmade table lamp will be a unique gift for a wine collector or brandy connoisseur. In this case, it is recommended to keep the labels on the bottles. And if you use oil bottles or other “non-alcoholic” product for the lamp, then it will become a real gift for parents (mothers and grandmothers). In general, suitable for any connoisseur of handmade items.

As already mentioned above, you can leave a branded sticker as a decoration, as well as fill the interior of the bottle with multi-colored glass balls in accordance with colors your interior.

To create a table lamp with your own hands, you will need:
1. Beautiful bottle.
2. A set consisting of a cartridge, a switch, a cord and a plug. You can use a ready-made kit, or you can buy everything separately.
3. Diamond crown.
4. A small lampshade, which can also be purchased ready-made or made by yourself.

As can be seen from the kit, the costs are the most minimal.

Step 1

The first step is to drill a hole in the bottle, through which the power cord will then be passed. Perhaps this is the most responsible and difficult part of the work.

The place for drilling is chosen on the side, which during operation will be located behind the lamp. Also, the hole for the power cord should be located as close as possible to the base of the luminaire.

Before starting work, it is necessary, by tilting the drill to the side, with the edge of the drill, mark the place of drilling. This is necessary so that the drill does not slip on the bottle and ultimately does not cause harm. After that, you can proceed directly to the drilling process. It should be noted that the drilling site must be constantly watered. This will protect you from glass dust, which will adversely affect your health if it enters the lungs. In addition, the water will not allow the glass to overheat and allow you to complete the difficult work to the end without harming the glass bottle.

Do not forget about protective equipment, such as gloves and goggles. Keep in mind that you perform all drilling work at your own peril and risk. The site site is not responsible for damage caused to your health in the process of manufacturing a table lamp.

The drilling process may take several minutes, depending on the quality and thickness of the glass. Be careful and patient and you will end up with a clean and even cut.

If, however, you do not dare to this work on your own, we recommend contacting glass cutting workshops. There, a master of his craft will cope with this task.

Step 2

Pass the power cord through the hole in the bottle. In this case, it is necessary to install a special rubber ring that will protect the power cord from chafing against the edges of the bottle.

If you are using a separately purchased cord, switch, socket and cartridge, then after passing the power cord, you will mount all the elements together.

In the event that you purchased a ready-made kit, you will have to cut the wire that runs inside the switch in order to be able to pass the cord through the opening of the bottle. After you have passed the cord, solder the wire at the cut and assemble the switch.

Attach the cartridge to the neck of the bottle and do not connect the plug to the socket until you finish creating the lamp.

Step 3

The next step is decoration. inner space bottles (see description at the beginning of the article), if there is such a desire. Paint the lampshade a color that matches the color of the bottle or the color of your room. Attach the lampshade to the cartridge.

Step 4

Install the light bulb in the socket. A few words about the choice of light bulbs. It is best to use low power or use LED. This requirement proceeds from the fact that to obtain as little heating as possible of the lampshade.




Tell me, do you have several in the house, or maybe even one beautiful bottle from any alcoholic drink? We think yes. Like this do-it-yourself bottle lamp it can work out if you try and have some tools and materials on hand:

  • bottle;
  • shade;
  • drill;
  • glass drill;
  • cartridge and wire.

The lampshade can be bought, but it is also better to make it yourself. We talked about how this can be done in one of the articles, and now look at table lamp from a bottle with a lampshade that we have chosen.

Here is a glass drill, it will take you 10-15 minutes to make one hole, as the drill just scratches the glass.

Some bottles have seams, it is better not to drill the bottle in this particular place, step back 1-2 cm from the seam. When drilling, you need to have water nearby and periodically lower the drill there and moisten the drilling site. After the drill has passed through the wall of the bottle, several rotations can be made to round and polish the hole somewhat.

The next will be a hole in the cover for installing the cartridge.

We assemble the cartridge, before that we pass the wire through the hole cut in the bottle and connect it, screw it into the cap and into the bottle.

Almost the last step. We try on everything and fasten the cork to the base of the bottle. Having assembled, you can make sure that we did everything right by inserting the light bulb into the cartridge and connecting the plug to the outlet.

And here is the finished lamp from the bottle already shining and delighting its new owners.

These table lamps are easy enough to make, but if you're used to finesse then check out the bedroom table lamps from Camelgroup.

Do not rush to throw away empty glass and plastic bottles. Many useful things can be made from them. household of things. We invite you to learn how to make a bottle lamp.

simple table lamp

To make you will need:

  • a suitable glass bottle for wine, champagne, whiskey or cognac;
  • a cartridge with an electric cord, on which there is a socket and a switch;
  • finished lampshade;
  • bulb;
  • rubber stopper stabilizer;
  • screwdriver.

The order of the robots for creating a table lamp-lamp:

  1. Cut the rubber stopper so that it fits easily in the neck of the bottle (picture 1).
  2. Screw the cartridge to the cork and attach the wires (pictures 2 and 3).
  3. Make an arc-mount to which the lampshade will be attached and screw in the light bulb (picture 4).
  4. Insert the plug into the socket and turn on the lamp (picture 5).

DIY bottle lamp is ready!

The principle is the same, but the design is different

Another option for creating a table lamp, but different in execution and design.

Instructions: how to make lamps from bottles (photo below):

  1. Take a glass bottle and make round hole below, closer to the bottom, using a drill on glass.
  2. Make a hole in the cork and thread an electric cord into it, and screw the thread on one side.
  3. Screw on the decorative cartridge.
  4. Place the cord in the bottle and close the neck with a cork.
  5. Pull the cord out of the hole in the bottle.
  6. Screw in the light bulb.

The original lamp from the bottle is ready!

Pendant lamps from bottles - disconnect the bottom

Such chandeliers will ideally fit into the interior of the kitchen, living room, bar, country house or cafe.

To make them, first you need to cut off the bottom of the bottle:

  1. Take a woolen thread, solvent, a bottle, a lighter, sandpaper, a bowl of ice water.
  2. Cut off a long piece of thread and soak it in solvent.
  3. Around the bottle, in the place that you want to cut off, knit a few circles of woolen thread.
  4. Take the bottle so that it is parallel to the ground and light the thread.
  5. The bottle must be gently scrolled around the axis for several minutes.
  6. When the fire goes out, instantly dip the bottle into the ice water.
  7. Remove the bottom carefully.
  8. Scrape the edges of the bottle with sandpaper.

Making a chandelier

When the bottom is cut off, you can start assembling the lamp:

  1. Take a cartridge or cork and insert it into the neck.
  2. Connect the cord.
  3. Screw in the light bulb.
  4. Hang a lamp from a bottle from the ceiling with a hook or make a special mount.

Thus, you can make lampshades instead of the usual chandeliers. To do this, simply measure the diameter of the bottle neck and see if it fits the size of the finished cartridge. If not, then cut off the neck in the same way as you got rid of the bottom of the bottle. Hang the finished ceiling in place of the old one.

Possible luminaire design

It is not necessary to make a lamp from regular bottle. It can be used as a basis for implementation interesting ideas and ideas.

Design options:

  • Color the bottle acrylic paint. You can draw some kind of picture or make a stained glass window. A lot of lamps made of bottles, identical in shape, but painted in different colors, look very nice.
  • You can tightly wrap the bottle with thread or yarn.
  • Cover the bottle and engrave.
  • If you are making a table lamp, then coffee beans can be poured inside the bottle, colorful salt, condiments, cereals, pasta and so on. Such a lamp will not only fulfill its intended purpose, but will also serve great decor for kitchen.
  • You can do a lot more.
  • If there are large perfume jars, they will also serve excellent material to create lamps.
  • To do hanging lamp, it is not necessary to fix the cartridge or cork in the neck of the bottle. You can completely insert the cord into the container, and place all other parts under the narrow top. Such a bottle will look more like a lampshade. Only then you need to think carefully about fixing the electrical cord.

Lamps from garlands

Do you want a garland to decorate the room? all year round, and not only on New Year? It can be done very simply.

Master class on creating a luminous decor:

  1. Choose the right glass bottle Christmas garland, sandpaper and a drill.
  2. Clean the bottle of all labels.
  3. Fix the bottle and carefully drill a small hole at the bottom. A cord from a garland should pass freely through it. Work carefully, because it is very easy not only to get hurt, but also to break the bottle.
  4. Use sandpaper to smooth the edges of the hole so you don't get hurt later.
  5. Push the garland inside the bottle through the drilled hole. It is necessary to place the end where there is no plug and mode switch panel. Try to put the garland so that it twists inside the bottle.

All is ready! If desired, you can somehow decorate the bottle. For example, draw a picture, and attach a ribbon or bow to the neck.

Such a lamp is very safe, because nothing will melt from the garland.

Plastic lampshade

Some will say that such a lamp made of plastic bottles is unsafe and has an unaesthetic appearance. In urban areas, this is true. But on the other hand, it is ideal for a gazebo in the country.

Master class: how to make a lamp out of plastic bottle do it yourself:

  1. Prepare a cartridge with an electric cord and a switch, a light bulb (you need an LED, a housekeeper or a regular one, but of low power), a five-liter water bottle, a glue gun, pliers, plastic spoons, a screwdriver, a construction knife.
  2. Using pliers, bite off the entire handle from the spoon so that one oval part remains.
  3. Cut off the bottom of the eggplant with a utility knife.
  4. Connect to the network.
  5. When it's ready, start gluing the spoons. The first row goes from the bottom, and all subsequent rows overlap the previous ones a little.
  6. Paste, thus, the entire baklaga.
  7. Glue the spoons together, folding them one into one to make a ring.
  8. Attach the cartridge and cord to the neck of the bottle.
  9. Glue a ring of spoons to the neck.
  10. Screw in the light bulb.

The lamp shade is ready! If desired, it can be painted. In order for the paint to lie evenly, it is better to paint each spoon separately, and then paste over the baklag with them. It is most convenient to use spray paint. So you get less dirty and the layer evenly lies on the surface of the spoons. Plus, it dries faster.

Fitting © 2022 Design and interior of apartments