Snow slide, do-it-yourself snow slide

If there is a ready-made wooden slide, then this is the ideal basis for creating an ice slide. The amount of water needed depends on its size, sometimes more than eight hundred liters of water were required to create a high-quality ice slide. So, find a source of water next to a finished wooden slide and connect a hose to it.

If there is no such source nearby, you will have to carry water in buckets by hand and water the hill from a garden watering can. It will be inconvenient to water a hill from a bucket, as its flow will be too strong and will wash away the snow. In this case, a cloth of dense fabric is placed on top of the slope, and then it is poured with water.

It is recommended to fill the hill in the evening, with a significant sub-zero temperature to apply in the morning finishing layer water and start riding. Before filling a wooden slide with water, it is necessary to stick it with snow. To do this, we bring snow on a shovel or use a stretcher and compact the snow along the slope of the hill and its handrails.

You can cut large bricks out of the snow and carry them to the hill, put it on it and distribute the snow in an even layer with a shovel. The roll-out of the finished slide can be continued far forward so that its length increases significantly. After the handrails, slope and roll-out are carefully and accurately covered with snow, we proceed to the process of flooding with water.

If you have a hose, put a spray nozzle on it and gently start spraying water from above onto the surface of the ramp and handrails, and then onto the roll out of the wooden slide. It is better to let the stairs remain without snow, if snow gets on it, remove it with a shovel, so it will be safer for children to climb the hill.

After the snow is well saturated with water, leave the hill for a while to form ice crust. Next, dissolve a small amount of snow in water so that you get a snow slurry. Putting on warm mittens and, over them, rubberized gloves, process uneven places and depressions on the slide so that its surface becomes perfectly smooth and even.

Now - the second layer of water: again we take the hose and slowly pour the slide from top to bottom. After making sure that the slide is even everywhere, you can leave it for the night. In the morning, you need to go through all the defects again with ice gruel and pour over the hill for the last time, and then let it completely freeze. Here, now you know everything about how to fill the hill correctly so that riding on it becomes a real pleasure for children and adults.

During active operation, make sure that it is not visible wooden base slides. If this nevertheless happened, you can again fill the hill with one layer, after filling the recesses with snow. And so that the layers are perfectly aligned, rub the junctions with a wet sponge.

Do not let several kids slide down the slide at once, as they can hit each other hard and injure themselves. Children under three years of age are not recommended to drive on very high and steep slides, it can be dangerous for them, in addition, the speed of the exit can greatly frighten the baby. Be vigilant during winter games and traditional fun.

A do-it-yourself snow slide is an ideal activity for adults and children. After all, you will have to spend only a few hours on the construction of the structure.

But for the whole winter, your kids will get a wonderful ice attraction.

Let's all start together

How to fill a hill of snow? To do this, you need the smallest thing - snow, desire and enthusiasm. Well, a few more hands. It's good to involve the kids in this case. After all, a slide made of snow, made with your own hands, will be especially loved if a piece of your work is invested in it. Younger children can be assigned the most simple and elementary work, such as bringing snow in children's buckets or rolling snowballs. Older children can be puzzled by the construction of steps. Well, more experienced can even be entrusted with filling the descent with water. Believe me, the children will remember the process of building a slide from ice and snow for a lifetime. Because it's so exciting!

Required inventory

Before building a snow slide, we will prepare the tools and fixtures that will be needed for the job. There should be a lot of snow so that a frame and steps can be built from it, as well as poured during the operation of the slide. You also need to prepare:

It is advisable to well equip the kids who will help you with the construction. After all, the main thing in this matter is not to get sick, and not just the solution of the question: "How to fill a hill of snow?" Therefore, it is better for children to wear waterproof overalls, as well as stock up on several pairs of mittens. Make sure that the kids do not sweat and do not unfasten at the same time, otherwise it is very easy to catch a cold.

Specifications

Any construction object must have its own parameters. They depend on the age of those who will ride on homemade slide. If these are teenagers and adults, you can safely build a hill one and a half to two meters high. If kids will ride this snow attraction, then the height of the slide should be no more than one meter.

The length of the descent, so that it is easy and not dangerous to ride, should be about 5 meters. It is very important to calculate the angle of descent. The hill should not be made too steep, the slope should be about 40 degrees. If you make it bigger, then the fun of

there will be less descent, besides, at the end of the descent on a steep hill, the child can get a noticeable blow. But even a too gentle slide will be uninteresting, because then the speed of the slider will significantly decrease.

The width of the slide should be sufficient so that it can be rolled down on a sled. This is about half a meter, no more. Having thought over how to fill a hill of snow, do not forget about the sides on the descent to ensure safety. Otherwise, the kids risk falling before reaching the end.

Do not forget about reliable steps - it will be easy to climb the hill along them, and if they are sprinkled with sand, they will no longer be slippery.

Benefits of a snow slide

If you make a slide at the beginning of winter, then throughout the snowy time it can be improved and modernized by adding arches, turns, branching, filling and decorating with snow sculptures. The advantages of this design are obvious:

• construction can be carried out with children of all ages;
• none special costs on expensive materials or specific tools are required;
• you can experiment and apply your own design.

Before pouring a hill of snow, you must select comfortable spot. It is very important to place it away from the roadway and away from the paths. See how well it will be lit in the evening, because it gets dark early in winter. Choose its location so that there are no bushes and trees nearby, no fences and hatches, poles, nothing that could pose a danger to skiers.

Shovels in hand - and forward

It is better, of course, to guess when a relatively warm day will come. Then the snow will be sticky and the construction process will be much easier. How to make a hill out of snow? First, let's roll a few snow globes different sizes. We put the largest one at the base, then we install a smaller ball and so on until the very descent. We fill the empty space between them with snow and compact it tightly.

Then we form steps. They should be wide enough and not too high. It is recommended to lay sheets of plywood on the descent line - then the surface will be even and smooth. Plywood should be covered with snow and the surface should be compacted tightly with a thickness of about 10-15 centimeters. Then, after filling with water, the descent will not sag and no holes and mounds will appear on it.

Fill up a few times

When the frame of the slide is ready, it remains only to fill the slope with water. It is best to repeat this several times over several days so that the ice layer is strong.

Otherwise, the ice will be quickly broken by sleds. Do not pour water with a strong stream, so as not to wash away the snow, do it carefully and slowly.

If there are already frosts on the street and it is impossible to choose a warm day for the construction of a slide due to meteorological conditions, then from plywood and wooden shields you can install the formwork and fill it with snow.

Also, from snowdrifts that are well compressed, it will be convenient to cut snow bricks. They are placed, for example, at the base of steps.

Initially, the steps should also be filled with water - then they will acquire a fortress and will not crumble underfoot. As soon as they freeze well, they must be sprinkled with sand so that the children can safely climb them.

Think about the top of the snow slide. It should be flat, safe and relatively large so that the child does not fall off it. You can also lay boards or plywood on top of it. But be sure to ensure that the site is not slippery.

You can make two descents from one site: one is steeper, the other is more gentle. Don't forget to decorate your slide with an arch or a fun snowman - your attraction should be not only functional, but also aesthetically pleasing.

Find out how you can make a snow slide yourself in winter, how to properly fill it with water so that it freezes.

Agree that in new year holidays one of the best, most memorable childhood memories is winter festivities. Making a snowman, sledding, skiing, and, of course, on a roller coaster is a wonderful activity. The latter will be discussed in this article.

You will learn how to build a slide without difficulties at home, without anyone's help from outside. This slide will bring great joy to your kids and even adults, and so that the work is not so boring, you can involve the whole family in it.

How to make a snow slide for children with your own hands?

It often happens that some problems occur during the construction of the slide. It collapses, disintegrates, pits, irregularities appear in the most inappropriate place. Next, you will learn how to make a slide correctly. So that it is durable, reliable, and most importantly - comfortable.

Materials for the construction of the slide

For a successful build you will need the following:

1. Frost outside the window
2. Lots of pure snow
3. Shovel
4. Broom
5. A fair amount of water
6. Watering can, ladle
7. positive attitude
8. Scraper or spatula

To blind a slide, you must follow a few simple rules:

Safety. Choose a safe location future design. This is necessary so that your child is not injured during the descent, so that there are no trees, fences, roads, bushes and other obstacles on the way. You should not create an object of entertainment under the roofs of old houses, from which icicle, slate, brick, etc. can fall.

Hill height, angle of inclination. Determine the height of the future slide based on the age of the children. For very young children, somewhere up to three years old, a slide of one meter in height is enough. Best for older kids safe height is two to four meters. You should also follow right angle tilt, such that it was not more than forty degrees.

pure snow. When building a slide, you need to use pure material. Since your child can smear things. Make sure the kids don't get hurt. The problem arises if there is debris, branches, sticks, etc. in the snow.

How to create an ice slide:

• After the location, size is determined, we get to work. With the help of shovels it is necessary to sketch right amount snow. For example, a meter slide can be built in about thirty minutes. It is advisable to make the foundation of your snow slide using rolled large balls of snow. Thus, you will already have the base of the slide.
• Next, we proceed to the formation of our slide. With the help of a spatula, a broom, we give it the desired shape. Doing optimal angle slope of the slide, straighten the area of ​​the descent of the snow slide.

• If the hill is high, make steps with a spatula (scraper), a shovel. For strength, strengthen the steps with your feet so that the snow settles, and only then form auxiliary tool. They should be comfortable, small, so that children can easily climb up.

IMPORTANT: Acceptable step width is at least twenty-nine centimeters.

Do not forget about the sides. Their height should be approximately ten to thirty centimeters, depending on the age of the child. The sides can be made with a shovel. Also, in order to give them a form, it is necessary to use manual work. During it, do not forget to wear gloves as protection from the cold.

If there is a desire, time, then add decor. Decorate the hill with snowmen, various figures, paint it with patterns. Or do everything to your liking, a lot depends on your imagination.

How to fill a hill of snow with water?

We have come to the most difficult final stage - to fill the ice slide with water. The descent of the slide must be poured in several stages - at least three times. Use cool water with a sprayer, watering can, ladle.

You will need a broom, with which you spray an even layer of water over the entire surface of the structure. Make sure that there are no bumps, holes, bumps. To do this, during pouring, it is necessary to slap a seized thin, fragile layer of ice with a broom. After the second stage, you have a rough crust of ice. For a more reliable result, fill the slide for the third time, after which you will get a strong, smooth, and most importantly, reliable design.

IMPORTANT: Pour finished structure stands at a low temperature, from 10 degrees below zero. Otherwise, your efforts will be completely useless.

Subject to the entire sequence of work, you will receive an excellent snow slide which your children will be very happy with. If the winter turns out to be frosty, then the subject of entertainment will stand until the spring thaw.

Video: Do-it-yourself snow slide

Winter is just around the corner, and for the kids it's time for school holidays. Any parent wants their child to have fun and usefully spend time during this period. Of course, children and adults are also important for walks on fresh air and family leisure. So that they do not turn into a boring pastime, you can entertain yourself. For example, together with the children, build a snow slide, after which it is fun to ride from it. We will tell you how to do this in this article.

snow Hill

Since ancient times in Rus' it was customary to ride a sleigh from the hills. It was a favorite pastime of both old and young. Those who live in hilly or mountainous areas are lucky enough to wait for snowy weather and the slide is ready. And most importantly, no effort is required. Well, if there is no hillock near your house, or you live in apartment building the hill can be built with your own hands. How to do this we will tell further.

do-it-yourself snow slide

Making a slide with your own hands is not so difficult. For this you will need:

• prepared site;
• snow;
• several shovels;
• water.

Firstly, you need to choose a place for the future slide. It is best to place it in an open area away from roads. This is primarily a question of the safety of the children themselves. If necessary, free the area from debris. The size of the slide is also important; from a small slide, it will be inconvenient for children to ride, and a very large one may not be safe for children. The height should be comfortable and preferably below the height of an adult. So you will be more comfortable to follow and help the child. The length is best done 5 m, this is the most optimal length. The shape of the slide is also important.

Show your imagination and make it with a twist, or decorate with an arch at the top. Children will have a lot of fun riding a non-standard slide. The place is marked, now it is necessary to sketch the snow in the form of a hill and compact it. Everything must be carried out evenly and in several stages. The angle of the slide should be between 30 and 50 degrees. The slope angle can be adjusted by adding material. If the slide is intended for young children, then it must be made flat from the very beginning of work. For convenience, it is necessary to provide steps along which the children will climb the hill. So that they do not slip, you can lay them out with planks. Along the length of the slope itself, you can make a small side of snow so that children who ride do not fall. After completing the main work, it is recommended to fill the slide with water. To do this, you can take a bucket of water, and gradually water it from the stairs. Then let the water freeze, and repeat the procedure several more times until the surface becomes smooth. If cracks and pits appear on the slope during the pouring process, they must be filled with snow and poured with water. After that, it is recommended to leave the slide for the night, during which time the water will freeze and in the morning the children will be able to ride from it.

How to make a snow slide

Making a snow slide is quite simple. This will require a minimum of inventory, just a couple of shovels, pieces of plywood and snow. The snow slide has a number of positive aspects:

1. children can be involved in work, regardless of age;
2. no material costs;
3. malleable material gives a great flight for imagination;
4. the ability to add new items at any time.

There is only one drawback - it's seasonal. The slide will delight everyone only during the winter. Most importantly, adults and children can show their imagination and create something original. To simplify the work, you can build a frame from pieces of plywood. Secure them firmly and decorate with snow. Having made the descent and steps, it is worth taking care of safety. Along the edges of the descent, make bumpers and provide small handrails for the convenience of climbing the hill. After that, the entire hill must be covered with water to form an ice glaze. It will give the whole structure strength. For convenience and safety, the uppermost platform of the structure can be covered with plywood. Then you have to wait until next day and feel free to start testing.

How to fill a hill of snow

It would seem that it could be easier to fill a snow slide with water. But, and here there are some nuances, the implementation of which will greatly simplify the work. For correct filling the following rules must be observed:

• you need to protect your hands from cold and moisture, for this we put on warm gloves, and rubber ones on top;
• it is best to fill the surface in frosty weather;
• best to pour warm water it will dry up faster.

It's not all that difficult. For filling it is best to use the usual garden watering can. With its help, the water is more evenly distributed over the hill and the surface will be smoother. This process is quite labor intensive. But a few hours of work are worth happy children's eyes and ringing laughter. This will be the best reward for your efforts.

Snow slide

The snow slide can be made in different form and size. For example, you can build wooden frame with two slopes. One is steeper and longer for adults and older children, and the other with a smaller angle and length of descent for toddlers. After that, the frame is filled with snow and the slide is ready. This building will be strong and safe. And most importantly, it can be used in the warm season. By placing sheets of tin or other sliding material on the slopes for the amusement of the kids.

If you have imagination and free time, you can build a slide with arches in the form of a log hut for children. On such a hill there are several descents. Children will be very interested to ride from such a slide. The main thing is that they will have a fun and active time.

If desired, you can beautifully decorate even the most ordinary mountain. To do this, you need paints and brushes. On the side surfaces of the slide, you can draw Christmas trees, snowflakes and winter birds (for example, a bullfinch). Such uncomplicated patterns will appeal not only to children, but also to adults. Toddlers will enjoy rolling down the slide and admiring the drawings on their way to the climb. As you can see, making a slide is quite simple, and with a little imagination, you can make even the simplest model beautiful.

This article talks about snow slides and how you can build them yourself. Advice is given on filling the resulting structure with water. Describes how to arrange appearance structures. Using the tips of the article, you can quickly build a safe slide for children using improvised materials. Correctly fill it with water and, if desired, decorate it in an original way. Successful work.