Jammed the lock in the door what to do. The lock broke. Stuck door lock

An unpleasant surprise can lie in wait for a person at the very wrong moment. Inserting the key into the keyhole and waiting for the usual characteristic click of the opening door, you may encounter a persistent reluctance of the mechanism to perform the usual action and urgently let the owner into the apartment.

What to do if and how to deal with the problem on your own, without waiting for the arrival of the master, who, even with an urgent call, can be slow? There are ways to resolve this situation, each of which depends on the specific cause of the violation of the correct functioning of the lock.

How to deal with a broken door lock?

The door lock can be completely broken, and then the only option will be to dismantle and replace it, but most often the breakdown can be fixed on its own. The malfunction can manifest itself in two ways: the device does not open when closed door and does not want to close when it is open. In this case (when the door does not close), you need to make sure that the whole thing is in the lock, and not in the door leaf that has sagged on old hinges or debris that has fallen into the hole for the tongue to enter. To do this, the lock handle is turned several times with the door open, and if it is nevertheless confirmed that the lock has broken, then you will have to proceed with disassembling the case and prepare the materials and tools necessary for work:

• screwdriver;
• tweezers;
• a small brush with a hard bristle (can be replaced with an old toothbrush);
• soft fabric;
• kerosene;
• machine oil.

First of all, unscrew the fixing screws, remove the door lock and lay it on flat surface. Then they proceed to disassemble the case itself, for this, the screws holding the cover are removed. Having opened it, inspect the inside of the device for broken or deformed parts. Immediately you need to use tweezers to clean all possible places from dirt and dust. The reason may be in the shutter lever or springs, one of which serves to return the lever to its proper place, and the second holds the latch. If it is found that the bolt bar is bent, then you can straighten it by holding it in a vise. Broken springs will have to be replaced, and those that have popped out of the mounts should be installed in their proper place.

Before removing parts, you should remember the layout of their location, so that later you do not encounter a misunderstanding of where they were installed.

All removed elements must be washed with kerosene and wiped dry with a soft cloth. assembled structure lubricate with machine oil, then install the cover and return the lock to its original place.

How to open a door with a broken lock?

A more complicated situation arises when the door lock breaks with the door closed. In these cases, even the most self-confident people fall into complete confusion and feel helpless. It becomes especially offensive when the key in the keyhole does not want to not only turn, but also be pulled out of it. But what if the key itself is broken and there are no improvised tools to remove it from the lock slot? The fact that to repair the device you need to at least open the door is clear even to a non-professional. There are several clever ways to do this.

You can try to open the door. You will need a screwdriver, a metal ruler or a regular plastic card. Any of these items is inserted into the gap between the door leaf and the frame exactly in the place where the tongue is located lock system. The tool is tilted towards the handle and with a sliding motion they try to drown it as deep as possible along the tongue. Then with one hand they try to move the latch, with the other they pull the door in their direction.

If the design allows you to unscrew the visible bolts, then this can be done with a penknife or nail file, and then squeeze out the locking mechanism. In especially serious cases, knocking out the cylinder or drilling it is applicable. The last way to deal with a jammed lock can be cutting the door off its hinges with a grinder.

And the canvases themselves now a large number of. Each plant guarantees the quality of its products. But such incidents as a jammed lock are quite common. And it doesn't matter if it happened inside or outside the house. Let's look at how to open the door if the lock is jammed.

What is causing the breakdown?

The reasons are many:

• manufacturing defects;
• closing the door with great effort, with a bang;
• periodic lubrication of the mechanism is not performed;
• the door is not installed level, skewed;
• got inside foreign object(the vandals tried);
• the key broke off inside the mechanism;
• use of a poor-quality duplicate.

These are a number of factors that lead to breakdowns. Consider some ways to open the door if the lock is jammed.

Interior devices

Locks are inserted into such canvases with simple mechanisms. If the tongue is jammed, you need to carry out a series of actions:

• Take plastic card and insert it into the gap between the frame and the door at the level of the locking mechanism (tongue).
• Tilt the card to the side and carefully advance. The movement should go along the beveled fragment of the tongue. It is important to consider which side this area is on. Otherwise, the card will have to be pushed over the mechanism and lowered at an angle in order to walk along the beveled area on the other side. When pressed, the locking mechanism will move away and the door will open.

For this process, not only a credit card is used, but also other flat objects of sufficient rigidity, for example, a knife. This is the first way to open interior door if the lock is jammed. If it comes to the English device, then the central part is drilled out, the cylindrical rod is removed. And then the locking mechanism of the lock is hooked and pulled. This will cause the mechanism to open.

For modern models when there is a handle and a lock, this method will not work. How to open the door if the lock is jammed? There is alternative way. Remove decorative caps. Next, the screws holding the handle are untwisted, and the latter is removed. In the hole, you need to find a locking mechanism and pick it up with a thin, but fairly stiff wire. Then you should install the handle in place. Simultaneously pressing it down, it is necessary to act on rotary mechanism wire and put pressure on the door with your shoulder.

What to do if you can't get along with the lock?

When the door has glass inserts, carefully remove the retaining rails and expose the decor. Through the hole formed, you need to reach the handle on the other side and try to open it. In some variants door leaf dismantled from the hinges. And then the problem of repair or larvae is solved.

Well, the last way is the removal of the door leaf. This is a costly method, but in some cases it is indispensable. We figured out the interior doors, and now we'll find out how to open the jammed front door lock.

Jamming the lock and the key in it

Arm yourself with WD-40 fluid, which is sold at auto parts stores or home improvement departments. It is necessary to process the lock, gently turning the key from side to side, and try to open it. There is a blockage treated with liquid, and the key is inserted into the lock cylinder several times and pulled out until the dirt is completely removed.

The key is broken and stuck - this situation is more complicated. There are several options:

• A piece of key sticks out. You should take the pliers and use them to turn the key stem to the desired position. Then carefully remove.
• Fragment inside. Here you can try with a sharp object (knitting needle, paper clip, etc.) to push out or pull the stuck end to the exit. And then pick up and pull out with tweezers.

If these methods do not help, contact specialized services. They will help to get out of the situation with the least damage.

Types of locks and methods of opening them

From the type of lock you can understand whether it will be possible to open it or not:

• The larva is in the form of a cylinder. How to open the door if the lock of such a plan is jammed? We'll have to crack the larva. But it is easier to replace it than completely. For this, a drill or pliers are used. The outer part is bitten off or drilled out, the remnants are knocked out with a thick screwdriver and a hammer. Cross locks are easier to open. Chewing gum is hammered into the well, a screwdriver is inserted and rotated instead of a key. After a few turns, the gum will take the form of a key and open the lock.
• Lever devices are reliable, but they can fail sooner or later. If the lock is jammed, you need to remove the key and look inside the well with a flashlight. Perhaps one of the levers (plates) is jammed. A thin tool (knitting needle, hairpin, etc.) should be installed in place. If you couldn’t solve the problem yourself, then it’s better to turn to professionals, since these locks are unique in their reliability, and you can’t open them with a simple paper clip.

Entrance doors have more complex locking devices.

Balcony door

Implied plastic construction. And she has problems. Solving them is simple: you need to remove the double-glazed window. It is fixed with spatulas. Carefully dismantle, remove the glass. Thus, it becomes possible to reach the handle from the other side. Reverse installation glass does not require additional costs. This is the simplest and effective way how to open a plastic door if the lock is jammed.

It is quite possible to open a balcony or interior door yourself. But with metal entrances, as a rule, you will need the help of professionals. This will help to avoid drastic measures to cut the hinges or cut out the lock, which threatens to completely replace the door leaf. To reduce the risk of problems, the lock must be periodically lubricated.

So, we figured out how to open a metal door if the lock is stuck. But it is better not to bring it to this and process the mechanism in a timely manner.

A jammed lock or a stuck key is a common nuisance that always happens at the wrong time. But it doesn't always need to be replaced. door locks, you can fix the breakdown quickly and on your own. It is important to understand the cause of the breakdown and know how to fix it. Jamming of crossbars and a key in a well occurs in some cases that you need to know.

The main reasons for the breakdown of the lock

Any technique informs the owner about a future breakdown with signals. Paying attention to them in a timely manner, you can avoid damage and replacement of the device. The first seizures require contacting specialists or self disassembly and cleaning parts.

Important! If the lock is disassembled on your own, follow the correct reassembly of the structure after cleaning the parts.

Having mixed up the position of the plates in the lever lock, you will need to perform several dozen rearrangements of parts for the correct assembly and operation of the structure.

If there is no response to warning signals, the lock, having failed, will require calling the masters and opening the doors using a grinder and other devices. To prevent such situations, it is important to know the list of the main causes of breakdowns:

Knowing possible reasons a breakdown that has occurred, it is easier to understand what measures should be taken to fix the breakdown on your own or call locksmiths. We will analyze the main breakdowns and ways to solve the problem.

Important! When the lock breaks metal door from the installed internal decorative plate, a call will be required from the company that installed the door. Only they will be able to qualitatively remove the finish and free access to the castle.

How to open the door if the lock is jammed?

Well, if such a situation arose with open door. In this case, the solution to the problem is simple. You need to remove the larva or lever lock. The key sticking out in the larva can be blown with BD-40 liquid and gradually turning from side to side, we try to turn it.

It does not work, you need to move to a more radical method. We clamp the key with pliers and try, loosening it, to make a turn. As a rule, constant spilling of liquid and loosening of the key work, the key opens the lock.

If the door is closed and the lock is jammed, we perform the work in the same sequence. Constantly pouring liquid along the hollows of the key, we try to turn the key. The rotation is performed in different sides with small amplitude. If the reason is not in the breakdown of the lock itself, it will be possible to open the door. Broken lock or dropped pins - in this case, you will need to drill a hole in the larva and with a screwdriver, gradually shifting the bolt to open the lock.

In the situation with lever locks, everything is more complicated. The VDeshki canister is equipped with a thin tube. Having turned the key a little, we wind up the tube into the vacated gap and run the cleaning liquid into the lock. If the reason is thickened grease, dirt and dust that got into the organic lock, the VD-40 treatment will cope with the blockage and the key will turn the bolt. The reason is the breakdown of the lock - you will have to call locksmiths and cut the locks with a grinder.

But if the door was able to open, you can disassemble the lock and try to clean and lubricate it. To do this, remove the lock cover and fold the parts in a certain order. We remove dirt and rust from the case. We clean each part of rust, oil and dirt, lubricate them silicone grease and set in place. All parts are installed in the same position as during disassembly.

After assembling the lock and checking it for operability, you can install it on the door. If there is a breakdown, door locks will need to be replaced.

Important! Do not use any lubricant for lubrication. vegetable oil especially sunflower. Such work will lead to a quick breakdown of the lock. The oil will thicken and the lock can be opened with any key, if it has not been jammed before. This method was used by burglars in the last century.

What to do if the key gets stuck?

The work should be carried out in the same way as when jamming the lock. It will take a lot of patience when sticking matches or other objects into the larva by vandals. To correct the situation, with pliers, carefully turning, we pull out the key from the well. With thin wires with curved edges, we pull out foreign objects from the larva.

If the larva is dirty or the lubricant is frozen, the keyhole is filled with VDshka, after a pause, we try to pull out the stuck key, gradually loosening it. It is important here not to break the key in the well. If this happens, you need to disassemble the lock or get the larva and try to get the chip. Level locks in this regard are simple. Having removed the cover, we release the plates and take out the chip. If the key remained in the larva and did not pull out after being treated with liquid, this will require replacing the larva.

More difficult situations and if there are no skills in working with locksmith tools, they will require the call of specialists.

What to do to protect the lock from jamming?

To prevent breakdowns and prevent significant costs, you can pay attention to the first signs of breakdowns and minor jamming of the lock and door.

Never open the lock after turning the handle on a closed door.

As a rule, the latch hole is made with less play than the bolts (locks) of the lock. Therefore, the door moves away, the operation of the lock is hampered by additional friction on the metal of the reciprocal hole in the loot.
In this case, the door is pressed until the latch clicks, then open the lock with the key.

Minor difficulties in getting, turning the key require treatment of the lock with cleaning liquids or complete disassembly and lubrication of the structure.

Distortions, sagging hinges cause difficulties in the normal operation of the door. It does not close completely, the lock begins to close with effort. This kind of work is unacceptable. In this situation, calling specialists from the company that installed your door or self-adjustment hidden loops.

It's simple to execute. With the help of a hexagon key, we shift the door in the place of mashing, we achieve normal operation. Good installed door, must be in any position. A move to open or close is not allowed.

In conclusion, some conclusions.

It is very easy to break down, but then you will need high costs finances, time to correct the situation. Lubricate the lock, the larva, treat them with cleaning liquids, avoid distortions, difficulty in closing the lock - such simple work exclude the possibility of a situation with protruding fragments of keys and a jammed lock.

Table of Contents 24-11-2015 The door is always a high probability of failure, as it is used regularly.

Broken key

If the key is broken in the lock, then you need to pull out the chip. When it sticks out of the mouth, just take the pliers and pull it out, and if it is stuck in the mechanism, then the task becomes more complicated. You can try to remove the chip with a jigsaw blade - push it into the keyhole from the bottom side with the teeth up. Then turn to pick up the key and carefully remove the blade along with the fragment.

If there is a second key, then there will be no further problems. If there is no key, then you can use a hairpin, screwdriver. When the chip could not be obtained, then you need to unwind the lock and remove the broken key. If you can’t pull out the chip, then you can open the door by removing it from the hinges.

Key in the door

Sometimes the key is left with reverse side doors - for example, a child has closed in the room, which closes then closes, but cannot open it on its own. You can extract the key as follows:

• a newspaper or a sheet of paper is inserted into the slot directly under the keyhole;
• with a pin or thin knitting needle, push the key outward with a nail;
• when the key falls on the newspaper, it is pulled back into the room and the room is opened with the key already in hand.

Of course, "conjuring" over the door with a crowbar, turning the lock and other mechanisms is always a risk of ruining the structure. Therefore, after a couple of unsuccessful attempts, it is better to call the master, who will do everything neatly and without damage.

Problems with a plastic balcony door

If a plastic door is jammed - most often, trouble happens with the entrance to the balcony, then you need to remember about its fragility. You need to remember this if you want to "break through" metal-plastic door. Here, all the "case" elements are made of not the most strong materials and such doors are not designed for "military operations". In principle, you can use force and just break them, but this will be followed by repairs, which will be expensive.

Do not immediately begin to actively deal with the lock - plastic door can get scratched if you start picking at its casing or lock sharp objects.

Most often, it begins to “wedge” with a sharp change in the position of the handle from the “closed” to “ventilation” state. In such a situation, the handle is blocked, and the structure hangs, leaning on the lower corner - it can neither be closed nor opened. What to do?

First, decide what kind of hardware you have. Products of the brand GU, Roto, Winkhaus have a metal tongue at the end, just below the handle. Return this tongue to its original position - vertically. And with the other hand, turn the handle horizontally to the “open” position and press the door. Then lower the handle down and gently close.

At the end there may not be a tongue, but a metal plate with a spring - then align the door vertically, press the plate against the seal and close by lowering the handle down.

balcony door it can also wedge due to a breakage of the handle or due to the fact that the handle needs to be lubricated. The locking mechanism can break quickly, and then it needs to be replaced. To do this, remove the old handle:

• set to the "open" position (as far as possible);
• expand the decorative plate at the base of the handle from vertical to horizontal position;
• under it there will be screws that secure the handle - with a screwdriver you need to unscrew them, pull them towards you and remove the handle. Insert a new one in the same way, screwing it on with screws.

The plastic door often warps due to the high operational load. If you often hear creaking, the seal is slightly deformed, and the handle often sticks, this is a sign that the design may fail. To adjust the skew, evaluate the door visually. In the closed state, you need to circle it with a pencil, then open it slightly and see along the contour where it has shifted.

Remove the protective caps first. Then, when you get to the hinges, tighten the hinge screw and turn the screw with a hex key to adjust the door leaf. If it is skewed vertically, then tighten the screw from the bottom of the upper and lower hinges. Turn the door counterclockwise to raise the door, vice versa to lower it.

If all the above methods do not work, then most likely the system is deformed. This happens if a low-quality chinese door or in case of incorrect installation in combination with high temperatures, loads. Here only can correct the situation.

Tricky improvised tools

Hairpin

If the door to the apartment slammed shut, and you are without a key, or you just lost the key, then you can open the lock with a simple hairpin or paper clip. To do this, the "tool" must be broken into two parts - one end inside the lock, and the other - in order to move the pins. First you need to turn the lock. Wire works the same way.

Against stuck interior latch a regular paper clip will work fine. If you have a lever lock, then the door is pulled back, a wire is threaded into the lock and the levers are moved away. The main thing is that fragments do not get into the mechanism.

For a cylinder lock, another sequence of work with a master key (hairpin):

• a small hole is carefully drilled above the key hole;
• the stopper is lifted with a hairpin and the bolt hook is moved back.

For a cylinder pin mechanism, you can simply make a hole in the cylinder, insert a wire into it and turn the cylinder with a master key.

Screwdriver

A screwdriver can open almost any lock (especially true for a cross-shaped lock). Filmed top part lock, a screwdriver is inserted into the keyhole, and the mechanism turns. You can also do if the door handle is broken. If there is a need to move the latch, then you need to remove the front panel and feel it with a screwdriver.

Most often, in locks with a bolt installed, when opening, part of the turn is not screwed in, the latch remains in a half-open state. Then you just need to press the door with a crowbar a couple of millimeters.