What does 1 linear meter mean. How to count running meter
The concept of "linear meter" often confuses people. Although there is nothing mysterious, and even more terrible, in this phrase. Consider several options where this concept can be applied, and learn how to calculate required amount running meters.
Linear meter- this is the usual length in meters, but taking into account the width of any finishing or household material (carpet, linoleum, plastic or vinyl film). Let's say you have a room 4.5 meters wide and 6.0 meters long, and you are going to lay this room new linoleum. In the store, you need to choose a material that is suitable in quality and pattern and be sure to pay attention to the width of the rolls. Linoleum width can be 1.5 meters, 2.0 meters or 2.5 meters. Since the width of the room is 4.5 meters, in order to cover it with linoleum, you will need to put a few pieces. It can be three pieces of 1.5 (1.5m * 3 = 4.5m) or two - one with a width of 2.0 and the second - 2.5 (2.0m + 2.5m = 4.5m).
In order not to make a mistake with the calculation of linear meters, it is better to come to the store with a drawn room plan. It should indicate the length and width of the room, and if it is a kitchen, then the height and location of windows and doors. Good luck with the calculation and repair!
Running meter - how much? This is an analogue of the usual meter. The running meter is used when measuring length in situations where the indication of width or height can be neglected for one reason or another.
In construction, there is such a thing as a "linear meter". For many, this measure of length remains a mystery for a long time. We hasten to reassure you, there is nothing terrible here, except for the expression itself.
Let's try to understand this concept and learn how to correctly calculate the required number of linear meters.
Running meter. How much is this?
This measure of length measures what is twisted into a roll: linoleum, corrugated board, fabric, carpet. This concept is also used to measure the amount of material needed in construction or it means the amount of work to be done. For example, a running meter of a kitchen, a pipe, a plinth, a fence, a tile, a foundation, and so on.
How much is a linear meter of fence and corrugated board?
In addition to the above materials, running meters calculate all materials that require docking with each other. These include, for example, pipes, cornices and, of course, corrugated fences.
Most often, metal profiles are used for fences. It is resistant to almost all weather conditions (snow, rain, wind and so on). The top is covered with a special polymeric material, which does not fade and is resistant to temperature extremes. Such fences can serve you up to 50 years.
As for corrugated board, it is better suited for combined fences from brick, stone or with forging elements. Such fences look very impressive. In this case, you can choose any color scheme or shade. You can also choose profiled sheets with any pattern.
Approximate calculation of the cost of erecting a fence from a profiled sheet
Naturally, everyone wants to save money. Therefore, before installing a fence, know how to correctly calculate the amount required material and current prices.
It is imperative that when calculating the total cost of a metal profile, it is necessary to take into account the length and height of the fence and its type (the presence of a foundation, combined or not). You can put a fence without a foundation under the support posts, but it is more reliable with it.
Let's say you decide to install a fence 2 meters high and 100 linear meters long. Plus, this will require support pillars cemented in the pits and a gate. Let's take good profile, for example, C20 s polymer coated. By standards, with a total sheet width of 1150 mm, its working width is 1100 mm. Rounded to the nearest meter for convenience.
This means that with a fence length of 100 meters, the area of \u200b\u200bthe corrugated board will be 200 square meters (100 sheets). support poles must be placed every two meters. And that 51 pieces with a height of 2.8 meters (taking into account the depth of 1 meter into concrete).
In addition to everything, you will need 2 lags per span - 200 running meters. Self-tapping screws - 8 pieces per square meter. And, of course, shipping is also paid separately.
Running meter of the kitchen is how much and how to calculate
If you decide to buy kitchen furniture, please note that it is also sold in running meters. Here everything is not as difficult as it seems at first glance. It will only be necessary to add up the length of all the walls where the kitchen will be installed, and then only choose the option to your liking.
The total cost per linear meter of your kitchen will include various shelves, facades, drawers, accessories. This is in addition to the standard width.
Attention! Remember that the price per meter of the kitchen does not include the oven, sink and hob.
In order not to make a mistake, it is better to draw a plan of a room or area with the indicated dimensions. Good luck with your calculations and good choice!
Let's say the room in which it is necessary to lay linoleum is 4.0 meters wide and 7.0 meters long. In the store, first select the desired pattern, color and material. Be sure to pay attention to the width of the roll. It can be 1.5 meters, 2.0 meters and 2.5 meters.
The width of our room is 5.5 meters, so we have to put a few pieces. It can be two pieces of 2.0 each (2.0m * 2 = 4.0m) or one piece of 2.5 and one piece of 1.5 (2.5m + 1.5m = 4.0m). You can choose any of these options, the main thing is that the length of the piece corresponds to the length of the room (7.0 meters).
Therefore, to cover your room with linoleum 2.0 meters wide, you will need to buy 14 linear meters (7 * 2 = 14). If you opted for the second option, then running meters will also require 14 - 7 meters with a width of 2.5 and 6 meters with a width of 1.5 (7 + 7 = 14).
Note! If you want to lay carpet, then you only need to calculate its length around the room, since it usually does not fit. Immediately choose the width of the room.
FAQ
How many mm in a linear meter?
As already mentioned in our article, to calculate a running meter, the length of the material is required, since the width is already fixed and can be different. That is, in 1 meter 1000mm of the length of the product.
How many linear meters per ton of rebar?
Calculating the amount of reinforcement for the foundation in running meters. The measure of the amount of reinforcement is a ton. Therefore, you need to convert a linear meter into tons and even then look at the price. But how many meters of reinforcement are contained in a ton depends on its diameter: the thinner the reinforcement, the more meters in a ton.
Let's say you need lumber. One square meter can be different amount running meters for different materials(edge board, floor board, lining). This is because the number of square meters also depends on the width of the material.
For example:
The edged board has parameters: 40x120, that is, its thickness is 40 mm, and its width is 120 mm. You need to calculate as follows:
Divide 1 square meter of edged board by 120 mm (product width), we get the value - 8.33. This is the number of linear meters.
1 sq.m. / 0.120 m = 8.33 l.m.
How much does a running meter of paint cost?
Most often, painters consider the volume of their work in square meters. That is, the length multiplied by the width of the surface.
One "linear meter" is equal to one meter?
Example - Structural Measurement
The second option for measuring the structure along the contour (outlining line) is chosen to calculate the cost of the work.
The length of the structure is measured with a tape measure.
What calculations are made in linear meters,
which ones are square?
floors
If the quantity of laminate, parquet or ceramic tiles required to cover the floor, calculated in square meters x, then the amount of linoleum or carpet is calculated in p / m.
Walls
The consumption of plaster, putty, primer, paint is calculated in kilograms per square meter. The consumption of wallpaper or drywall is calculated in p / m. To calculate the cost of work, calculate the cost of work per square meter.
The calculation of wallpaper for wall covering is similar to the calculation of linoleum.
Use the calculator below to calculate the dimensions window slopes, which are taken into account when calculating the cost repair work and purchase of consumables.
We are all accustomed to consider the unit of measurement of distance or length - a meter. Then what is a running meter? How is it different from the usual? Yes, basically nothing. In running meters, it is customary to measure the length of any material. At the same time, its width or height is not taken into account. They are either standard, or, when measured, they do not have a significant value.
What is measured in linear meters
In running meters, you usually measure the fabric in the store. With a width of 1.5 m, a piece of fabric 1 m by 1.5 m will be considered a linear meter. If you buy pipes, then, regardless of their thickness, the length of the pipe will be measured in linear meters. Also electrical cable. It doesn’t matter at all what its cross section is, whether it is thick or thin, the price for it is indicated per linear meter. The same situation with skirting boards, linoleum, various heaters and seals, etc. And when the cost of a kitchen is calculated in running meters, what do you mean?
What is a running meter of a kitchen
In this context, the linear meter is used, rather, as a conditional value. For the convenience of calculations, it is considered that a running meter of a kitchen is the furniture that is installed along a wall 1 m long from floor to ceiling, according to design project. It can be tables, shelves, cabinets and other modules. Usually, the cost of the kitchen is indicated as such - per linear meter. It is so convenient to immediately calculate its approximate price by multiplying the length of the wall along which it will be located by the cost of one linear meter of the kitchen.
Each of us at least once in our lives had a chance to make repairs or purchase new furniture. And quite often when buying certain building materials we heard about such a unit of measurement as a running meter. Such a concept confuses almost everyone, and it is rather difficult to immediately determine how this value differs from a square meter. You cannot find out what a running meter is from a dictionary, because this concept was invented by manufacturers of goods. But in this material we will understand what this unit of measurement is.
This parameter represents the usual length of one meter for products with a certain width, such as fabric or linoleum. And it is much easier to calculate the cost of goods in linear meters than in square meters. For example, you need to buy a segment carpet a certain length with a width of 2.5 meters. In this case, it will not be very convenient to calculate square meters, because you will need to calculate the area of \u200b\u200bthe product, and then divide it into squares. In general, to carry out rather complex mathematical calculations.
With a running meter, everything is simple and in order to find out the cost of the goods, you just need to multiply this unit of measurement by the length of the segment.
The linear meter is most often used to calculate the cost of such goods:
- the cloth;
- linoleum;
- carpet;
- finishing film and polyethylene for greenhouses;
- electrical cable;
- finished furniture;
- various cornices and pipes;
- railings and metal fences.
Most consumers believe that linear meters can only be calculated roll materials. And such an assumption cannot be considered absolutely wrong, because in most cases we are faced with this measure when buying similar products with a specific width. But running meters quite often calculate the cost of furniture.
Let's consider an example for clarity. The furniture manufacturer roughly calculated that to fill the kitchen with a length of three meters, taking into account all the cabinets, shelves, doors and fittings, it would be necessary to use materials worth 30 thousand rubles. This means that one meter of furniture will cost 10 thousand - this cost is the price per linear meter. And thanks to such simple mathematical calculations, the manufacturer can immediately indicate to the customer how much this or that set of standard sample will cost him.
But there is one nuance here, the cost of a running meter includes the price of the most cheap material and accessories, and sometimes the latter, in general, are not taken into account. So if you see a too tempting offer, then you should learn more specifically about the content of the goods. After all, this technique is often used only to attract new customers.
We know about what this unit of measurement is from the school desk. And remember that a square meter is needed to measure the area of various figures. And in fact, this measure is relevant for measuring any building materials and furniture. And if the width of the product practically does not affect the linear meter, then for a square this value is of great importance. For example, you need to lay linoleum in a room with a length of 3 meters and a width of 2.5. By simple mathematical calculations, we find out that the cut is 2.5 * 3 = 7.5 square meters.
This unit measures:
- area of the room;
- area of flooring surfaces;
- area of facing materials;
- area occupied by furniture.
As for furniture, this unit of measurement is especially relevant for small kitchens, where the area of \u200b\u200bthe headset plays a very important role.
Quite often, when buying certain materials, we need to convert one unit of measure to another and vice versa. But how to do this, because a linear meter is, in fact, a unit of length, while a square meter is an area. Do not despair, because it will be much easier to do than it seems.
In order to convert a linear meter to a square meter, you will need to know the exact width of the product, which the manufacturer takes as standard. And if everything is quite simple with the calculation of linoleum or carpet - we divide one linear meter by the width of the product and get the number of square meters, then with the calculation of furniture you will have to tinker a bit.
For example, in order to find out how many "squares" are contained in standard kitchen 5 meters long. You will need to measure the width floor elements, not the height of the kitchen set. Let's say it is standard 60 cm (0.6 meters). Now you need to multiply these parameters among themselves: 5 * 0.6 = 3 square meters. So in a simple way you will be able to calculate the area occupied by the kit and measured by "squares".