Edge parquet. End parquet from cuts of a tree “Tortsovka. The use of end parquet
End parquet- one of the most ancient types of sawing wood - the tree was sawn across the trunk and laid in this form.
Such a tree had maximum wear resistance, both to abrasion and to external influences, therefore, they laid it so that it would last for more than one hundred years.
AT modern world With the development of technology and skills, the tree trunk began to be cut along, after which we began to get parquet floors as close as possible to modern ones: solid board, piece parquet, parquet and engineered board. Such a tree costs less, but it also wears out faster.
End parquet cost
End parquet is a rather expensive thing, it costs from 6-16 tr. per sq.m. But according to its characteristics, it is simply irreplaceable in museums, shops, cafes, office buildings, etc.
How to choose end parquet
The end user chooses a parquet floor according to a set of characteristics: wood hardness and resistance to mechanical influences, because it directly depends on how long this or that coating will serve you. These indicators are directly related to both the type of wood and the type of cut. If we consider a massive board or piece parquet, in which there are types of sorting: rustic, select,, radial etc. That high cost of the highest sorting is due not only to the absence of wood defects in it (knots, sapwood), but also to the strength of the tree, because radial cut wood (as close as possible to the core of the trunk) has the maximum strength for a particular type of wood, and the further the lower the sorting, the more natural impurities that directly affect the service life.
If we are talking about glued structures, such as parquet or engineered board, then they are more resistant to changes in temperature and humidity in the room, because. there is much less valuable layer of wood here than in solid blocks of the array.
End parquet, as a rule, is cut into small cubes or parallelepipeds, which allows you to have a slight tension in the wood, for resistance to temperature and humidity changes, but at the same time to have maximum wear resistance due to unique look cut along the end of the wood, which makes such a tree practically “indestructible” in completely different living conditions- he can live up to 300-550 years.
The most common type of wood for end parquet is European oak.
Some manufacturers perform parquet and engineering boards from the end cut of wood. The front layer of the board in this case is assembled from end checkers. In this case, the board becomes less susceptible to moisture, which increases the parameters of its use.
Benefits of edge parquet
- Minimum seasonal changes
- High heat and sound insulation compared to other types of wooden floor structures
- Unique appearance at the expense unusual look saw cut
Laying
The most common type of laying is laying on a one-component elastic adhesive, so that the structure has mobility when the climatic seasons change.
The end parquet is sold without factory coating, so we recommend to coat it with oil or oil-wax.
The most hard part in laying end parquet, this is its grinding, because it, due to the specificity of the material, implies some complexity and painstaking work, tk. not always possible to achieve perfect result machines, sometimes you have to bring everything to mind manually.
It should be noted that due to special kind saw cut wood, consumption of varnish or oil when finishing may increase due to the greater absorbency of the material.
parquet from end cuts of wood as
durable flooring and family values
- probably the very first type of parquet due to the special way of processing wood, in this case sawing logs, when the tree is cut from the end of the trunk, and the cross section is the structure of annual wood rings. In ancient times, such a floor could be found in castles, cathedrals, armory chambers.
And as practice shows this kind wooden floors by definition, the most durable and resistant to mechanical stress, thereby providing long term services. It perfectly resists such frequent defects as: dents from heels, chairs and other objects that point to the floor surface. Thanks to the end cut, the resistance to compression, compared with the traditional cut, is increased by 30-40%.
Application:
End parquet will ideal solution for rooms with increased load or patency, for example, such as: administrative buildings, hotels, banks, cafes and restaurants, a billiard room, kitchens and children's rooms, well, in general, where parquet floors no place...
It is no secret that the end parquet has a high hygroscopicity (the ability to absorb moisture), but this was before, our technology for the manufacture of end parquet solves this problem by using the lower stabilizing layer of plywood and repeated treatment of the front surface with varnish or oil, which block the pores. Thus, we have a stable two-layer construction end parquet with a wear layer of 7mm.
Among all manufacturers, our product today has no analogues in the parquet market, it is delivered to the customer in a ready-made form that does not require modifications. The classic tongue-and-groove connection allows you to quickly and without special experience lay this parquet on a prepared base; laying our edge parquet is no different from laying classic parquet.
MAIN ADVANTAGES OF END PARQUET
- High resistance to shock and point influences.
- Incredible damage resistance.
- Outstanding resistance to mechanical stress and wear.
- High sound and heat insulation performance.
- The beauty. The ligature of annual rings exposed to the eye is natural decorative property end parquet.
- High resistance to ignition.
- Long service life.
- Possibility of repeated polishing.
- Environmentally friendly flooring.
- And in the case of PatternParquet, this is also an affordable price.
End parquet is a floor covering that has been used for decoration and decoration since ancient times. various interiors due to its presentable appearance! The canvas has high wear resistance, so it is perfect for decorating rooms and areas with high mechanical stress, while maintaining luxurious decor over many years of service, therefore it is considered topical material despite the high cost. End parquet is produced and produced most often in the form of small squares, but sometimes special order may also be issued in other forms.
For the production of end parquet, oak wood is most often used, less often - other types of wood. Unlike the classic parquet floor, this material has increased wear resistance and resistance to premature damage or abrasion of the surface, so this material can be used with the "warm floor" system, can be mounted in high traffic areas without fear that something will happen to the floor, and it will lose its appearance or form!
In production, planks with a vertical cut are used, so when laying, the floor often looks like a mosaic, so parquet is ideal for decorating wine rooms, an office, rooms country house, cottages or cottages. It will also perfectly fit into loft and classic interiors, creating an atmosphere of luxury, solidity and monumentalism! The panels are laid using a special one-component silane adhesive, which allows the canvas to “move” after installation. After that, the surface is subjected to grinding, which is one of the most difficult stages in the process of mounting the material: the quality of the work will depend general form parquet, as well as its durability.
Laying finishing material carried out on a plywood base or on cement, after which the surface is varnished or oiled to fill in any gaps, close the pores and make the canvas even more presentable beautiful view, however, it should be borne in mind that the material consumption will be large due to the high absorption of the compositions. End parquet is made from various materials: walnut, ash or juniper, elm, beech, larch, etc.
According to this principle, engineering board, where end part- This upper layer coverings, and the two lower ones are made of pine with a mutually perpendicular direction of the wood fibers. Such a web device makes the web more moisture resistant and keeps the surface in excellent condition for many years of operation, and also expands the possibilities of using the finishing material! End parquet floors sometimes serve up to 300 years, especially if they are assembled from separate mosaic pieces, so laying this material is made, truly, for centuries!
End parquet is made in the form of small squares or hexagons: the size of the die rarely exceeds 4x4 cm. For production, the end cut of the log is used, which is 40-50% harder than standard longitudinal cuts. Due to this, edge parquet is used in rooms with very high loads on the floor covering. In Russia, it was this flooring that was laid in the forges: the floor is invulnerable when heavy objects fall.
Benefits of edge parquet
- Wear resistance. End parquet withstands enormous loads: scratches, abrasion and other defects are excluded.
- Strength. The floor withstands mechanical damage, including falling weights.
- Maintainability. If, nevertheless, it was possible to damage the flooring, it is easy to replace a separate die: end parquet - without tongue and groove locks.
- Moisture resistance. The floor covering withstands temperature extremes and high humidity.
- Simple styling. Small dies are glued into boards on a plywood base, which greatly speeds up installation.
- Durability. The floor is made of solid European oak, cross-cut wood is used.
- Artistic styling. Small squares open up many installation options and also allow you to combine the floor with block parquet, especially in square and braided masonry.
Application
Performance characteristics and unusual appearance determine the scope floor covering: shopping centers with high traffic, production shops, billiard rooms, cafes, bars, restaurants, wine and smoking rooms, as well as household and commercial premises designed in loft or country style.
For laying the end wooden floor, parquet glue is used, and plywood or fiberboard is used as the base. It is also possible to lay parquet directly on concrete screed, but in this case the subfloor must be perfectly flat: the slightest differences will be noticeable and break the masonry. After installation, scraping is performed and protective treatment varnish or oil.
In addition, we offer ours: history, characteristics and descriptions of species, selection and types of sawing, wood drying, parquet chemistry, care and many other materials on wooden floor! The selection is regularly updated, do not miss new articles and choose high-quality parquet!
Choose end parquet for special interiors and enjoy the originality of a wooden floor!