Starline b94 instruction manual keychain. How to install and use Starline B94 and D94 car alarms according to the instructions. Main technical characteristics

car alarm StarLine B94 CAN This is a security and telematics complex designed to protect against theft and transfer information about the state of the car to the owner. It has the functions of autostart and engine control. Uses a non-scannable dialog control code. Equipped with an integrated multi-system CAN interface, a 512-channel anti-interference transceiver with a range of up to 2000 m, and a shock-resistant remote control.

Features and functionality

SUPER SLAVE The ability to control the security of the car with a standard remote control. Reliable protection is guaranteed by 3 security lines: interactive identification, standard system, validator-immobilizer

TELEMATICS The ability to install an optional GSM-GPRS, GPS-GLONASS telematics module allows you to determine the coordinates of the car, control it remotely

DIALOGUE PROTECTION Dialog code StarLine control with individual 128-bit encryption keys guarantees reliable protection against all known code grabbers

INTERFERENCE PROTECTION The security complex works confidently in conditions of extreme urban radio interference, thanks to a unique 512-channel narrow-band transceiver

3D SHOCK AND TILT SENSOR Integrated 3-axis tilt and shock sensor with remote adjustment. Registers jacking and evacuation of the car

EXTENDED TEMPERATURE RANGE The security complex works confidently in harsh climatic conditions at temperatures from -50 to +85 °С

AUTO START Intelligent autorun allows remote and automatic start engine by temperature or at a given time

RECORD ENERGY EFFICIENCY The use of patented progressive technologies and software solutions guarantees the safety of a sufficient battery charge for up to 60 days in armed mode

PHONE CONTROL The possibility of installing an optional GSM-module allows you to control security and service functions, as well as receive notifications about the security status on your mobile phone

BUILT-IN 2CAN INTERFACE Provides fast, convenient and secure installation security systems StarLine for modern cars equipped with CAN buses

COMMUNICATION CONTROL Automatic control of the communication channel ensures that the key fob is in the coverage area of ​​the alarm transceiver

IMPACT KEY RING The keychain has an innovative shockproof design, ergonomic design and internal protected antenna

"FLEXIBLE" SERVICE CHANNELS Programmable parameters for controlling emergency light alarms, folding mirrors, adjusting the seat for the owner, etc.

POWER KEYS ensure silent operation of the signaling unit and protection of power outputs against short circuits

Completeness

• Central processing unit
• Main key fob with feedback and LCD display
• Additional keychain
• Additional relay with block (3 pcs.)
• Power module
• Transceiver module (transceiver)
• immobilizer bypass module
• Siren
• Hood limit switch, 2 screws, ground terminal, diodes 1N4007
• Wire kit
• Car alarm status LED
• Service button
• Engine temperature sensor
• Connection wire limit switch bonnet
• Adapter for connecting additional sensors
• Reminder card
• User guide

Main technical characteristics

• Supply voltage, V: 9 - 18
• Maximum control range, m: 800
• Maximum alert range, m: 2000
• Current consumption in operating mode, mA: no more than 23
• Radio control channel frequency, MHz: 433.05 - 434.79
• Number of radio control channels: 512
• Operating temperature, ° С: -50 - +85

If for one reason or another you still had to face the need to purchase a new key fob and connect it to your alarm system, then this article is for you. you can follow this link.

Now all that's left for you is to flash the starline b94 key fob to your alarm system, to do this, follow three simple steps:

Step one
Disarm the alarm and, with the ignition off, press the service button (Valet) seven times, then turn the ignition on. The starline b94 alarm will indicate to you that you are in keyfob recording mode using 7 short beeps sirens.

step two
In order to write the key fob to the alarm memory, simultaneously press buttons 1 and 2 on it. Short sound signal informs you about a successful recording. With an interval of no more than five seconds, perform this operation in a row for all Starline b94 key fobs that you want to flash into the alarm.

Step Three
Switch off the ignition. The alarm will indicate that you have exited the keyfob recording mode with 3 short beeps.

It should also be remembered...
..all key fobs that were previously in memory Starline alarms B94s are erased when you start recording new fobs, so ALL the fobs you use, including the spare, must be rewritten in one session. In total, up to 4 key fobs can be stored in the car alarm memory.

And further...
If radio relays R2 are recorded in the system, then after recording the key fobs, it is necessary to restore the binding of the radio relay R2 to the car alarm. For this:
- turn on and off the ignition 7 times;
– press the service button 7 times and turn on the ignition. 7 siren signals will follow. Wait for 3 car alarm lights and a melodic key fob signal.
– switch off the ignition.

— reliable protection against theft, from causing harm to your car. It has a special design central block, which allows you to complete the alarm necessary set devices that will expand the number of functions required by a particular owner for certain conditions.

Completion and packaging

What's in the box:

• two instructions for installation and operation;
• user manual and warranty card;
• main keychain with feedback and LCD display;
• central processing unit;
• additional relay with block (3 pcs.);
• radio relay R2 (included only with B94 GSM/GPS)
• additional keychain;
• power module;
• transceiver module (transceiver);
• standard immobilizer bypass module;
• siren;
• main cable with 18-pin connector
• cable for connecting the power module and temperature sensor to the alarm unit;
• CAN interface connection cable;
• cable for connecting car alarm inputs;
• transceiver connection cable;
• GPS antenna (only included with B94 GSM/GPS);
• Light-emitting diode;
• hood limit switch wire;
• adapter for connecting additional sensors;
• service button;
• engine temperature sensor;
• hood limit switch.

Well-packed components are divided into groups, each in its place, in one of three boxes. The first two are intended for installation - equipment and wiring. The latter contains everything that is useful for the user to study the functions and control the system, i.e. instructions and key rings.

What is StarLine B94

StarLine B94 is a security and telematics complex, which is controlled in an interactive mode by a key fob with an LCD display and feedback, using keys, 128 bits long. At the moment, conversational data encoding is not available for intelligent hacking using code grabbers. The system is controlled on 512 channels, which makes the B94 much more noise-immune than lower-end devices, for example. When armed, regular alarm also goes into protection mode. The alarm connection interface is designed specifically for installation on modern cars with CAN bus. A lot of digital information is transmitted through this bus, the alarm, choosing the right one, makes it possible to control all the service functions of the car, such as:

• remote start preheater;
• installation of seats according to the specified parameters;
• return of the steering column to a predetermined position;
• turning on the dipped beam at the beginning of the movement;
• delay of turning off the light after arming;
• folding mirrors when arming;
• closing the hatch when arming;
• closing windows when arming.

StarLine B94 has additional programmable service channels which make it compatible with the unusual components of modern cars, for example, it is possible to control the START / STOP button or optical ignition locks. With the help of such channels, the implementation of other interesting functions is also available.

Possibility of simple remote start engine, stopping and extending its operation, diluted with convenient features:

• start by engine temperature;
• by alarm;
• every 2, 4, 6, 8…24 hours.

With autorun it is possible:

• turning off the wipers, radio;
• switching on heated seats and heated windows;
• imitation of signals of "intelligent" ignition locks;
• the second impulse to turn off the ignition in case of unsuccessful autostart on cars with a Start / Stop button;
• imitation of the second starter signal;
• disabling the accelerometer;
• turning off the engine when the temperature reaches 50 degrees will save fuel.

The standard immobilizer crawler is included in the delivery set. It is necessary for the implementation of remote or automatic engine start on cars with an RFID (Radio Frequency Identification) system, which will prevent the engine from starting without a transponder signal read from the standard key. The StarLine module, if it has a prescribed chip, automatically sends this signal during remote start.

Built-in 3-axis accelerometer allows you to respond to changes in vehicle inclination and vibration. That is, when you try to jack up, the alarm will react and go into alarm mode.

The signaling central unit includes modules that were previously separate devices, this architecture took up a lot of space, and a lot of wires were required to connect the components and connect them. Now everything is in one B94 block, if you dismantle its cover, we will see the device modular architecture. In particular, the 2CAN module, it is reflashed and configured for a specific car, taking into account the wishes of the owner - disable or leave certain functions.

Additional devices

Optionally, the StarLane B94 unit can be equipped with a built-in GSM/GPRS module. On its board there is a slot for a SIM card. Now, if you call the alarm number, in response you can hear information about its current status, then, by commands from the phone, control the status security complex. You can control the system without limiting the distance and see the location of the car on the map using an application for smartphones and tablets on Android, iOS (Iphone, Ipad) and Windows Phone 8.

The application will tell you when you need to replenish the balance. The smartphone display will show the alarm zones. Available detailed history actions that occurred with the security system. If necessary, the location of the car will be displayed on the map. For owners of equipment released in 2014, with a telematics 2.0 sticker, full-fledged vehicle monitoring will be available with the display of tracks, speed and route.

Application interface for iPhone.

Android application interface.

The digital blocking relay is designed specifically to work with StarLine security systems. Being hidden in the wiring of the car, if necessary, will block the operation of the engine. For example, by remotely turning on the anti-robbery mode, it is possible to stop the car in case of unauthorized movement.

Having understaffed the complex with a GPS antenna, it will be possible to accurately determine the coordinates of the location of the car.

System management tools

The main interactive keychain with Soft Touch coating and rubberized buttons is not afraid even of falls from a height of 2.5 meters. The arming and disarming buttons are separated, and the LCD display is very informative, displays icons with annotations in Russian. Using the key fob, it is possible to remotely program the system, now you do not need to disassemble the car interior to change the sensitivity of the shock and tilt sensor. You can also change any other provided parameters. Connecting via the CAN bus, the alarm reads the statuses of the hood, door, trunk limit switches, engine status, then sends all the information to the key fob, where the trigger zones will be visible.

The auxiliary key fob is also interactive, its three buttons duplicate the combinations and pressings of the corresponding buttons of the main key fob. Both can work in Slave mode.

In this mode, the system is armed and disarmed with a standard key fob, and the alarm key fobs begin to act as authorization tags, while the system status is reflected on the screen of the main StarLine key fob, which now serves as a pager. All alarm functions are saved. And in the hands free mode, the command to arm or disarm is given without any physical action at all. The system just needs to read the tag in your pocket.

• using a key fob (tag);
• service button;
• secret button.

Conclusion:

StarLine security complex is perfectly protected conversational coding and completed. Thanks to the use of flexible channels, it allows you to implement challenging tasks for installation in the most different cars, taking into account the specifics of each.

B94 is a security and telematics system with intelligent autostart, non-scannable dialog control code and Super Slave authorization. Model D94 has identical functions, but has slightly different CAN firmware and is intended for installation on SUVs and crossovers.

[ Hide ]

Overview of varieties of Starline B94 and D94 models

Car "signals" Starline line 94 are available in the following versions:

1. B94 2CAN slave. The B94S system has the ability to connect via CAN interface. Normally, only the communicator is used for control, but the user can implement the ability to configure functions using the phone and a web resource. To do this, the system must be equipped additional modules. This model does not include a radio relay.
2. D94 2 CAN. The alarm can be connected to digital bus to minimize interference with the operation of the vehicle's on-board network. The D94 security system can be controlled using mobile device.
3. D94 Dialog. It has similar functions, this alarm system is an intelligent telematics complex. It is also possible to auto-start the engine.
4. B94 Dialog. For driving additional equipment, as well as elements of the anti-theft system, a 512-channel transceiver is used. There is a digital interface for connecting to the car's electrical network.
5. D94 GSM GPS. This model is also a full-fledged intelligent telematics complex. Ability to monitor status and location vehicle. A mobile phone or the official web resource of the Starline developer can be used for control.
6. B94 GSM GPS. Almost the same system as D94 GSM GPS. The only difference is in the design of the keyrings. To ensure secure communication, requests and commands are sent via secure communication channels.

Specifications

Description of the main parameters and characteristics of protection systems:

1. Commands are transmitted and notifications are received via a radio channel with an operating frequency of 434 MHz.
2. The total number of control channels, regardless of the model version, is 512 pcs.
3. The maximum range of the communicator in terms of transmitting codes is no more than 800 meters. In the mode of receiving alerts and warnings, this indicator increases to 2 km.
4. The maximum working radius of the spare key fob is no more than 15 meters.
5. A three-axis integrated accelerometer is used to determine impacts and physical impacts on the body.
6. The operating temperature range is from -45 to +85 degrees. At such temperatures, the developer guarantees smooth operation security complex.
7. When the protection mode is enabled, the current consumption by the alarm will be no more than 26 mA.
8. To power the main key fob with a screen, AAA batteries rated at 1.5 volts are used. The replacement communicator uses 3V CR2450 compliant power supplies.

The channel "Unpacking Auto Goods" briefly spoke about the technical characteristics of Starline B94 alarms.

Equipment

Delivery set of Starline B94 car security systems:

1. Service manual for installation and use. The manual contains wiring diagrams and recommendations that allow you to properly install and connect the anti-theft complex.
2. Consumer note.
3. Warranty card.
4. The main pager (remote control, key fob, communicator) equipped with a liquid crystal screen.
5. Microprocessor module in a protected plastic case.
6. Power block.
7. Additional communicator. The display is not provided in it, but the case is equipped with an LED light to determine the status of the alarm.
8. Radio relay R2.
9. A transceiver equipped with an antenna adapter.
10. The bypass module for the standard engine blocker is added by the manufacturer to the delivery set at will.
11. Siren (may not be included).
12. Additional relay with block for connection.
13. Set of wires for installation and connection.
14. LED bulb with cable and connector.
15. GPS antenna, only included with D94 GSM/GPS.
16. Button to activate the service mode of maintenance of the anti-theft system.
17. Temperature controller for installation on the motor.
18. Adapter for connecting GSM-equipment.
19. One limit switch for mounting on the hood, diodes, terminal clamp and two self-tapping screws for fixing. Switches for doors and a luggage compartment are not included in the package therefore these devices are got separately.

Delivery kit alarm Starline B94

User Vadim Chub talked about the configuration of Starline D94 systems, as well as some of their features in his video.

Key Features and Benefits

The main feature of Starline 94 alarms is the ability to monitor the location of the vehicle. For this, a special telematics module is used, which interacts with GPS and GLONASS satellites.

List of features of Starline B94 systems:

1. Dialogue protection of transmitted signals. The code of the security complex is protected by 128-bit encryption keys. According to the developer, this eliminates the possibility of electronic hacking.
2. The use of a 512-channel transceiver allows Starline B94 alarms to work without failure in conditions of serious urban interference. But if the installation of the complex is performed incorrectly, then radio interference will affect the range of the transceiver.
3. Availability of a communication channel control system. The alarm performs diagnostics of the communicator being within the range of the antenna adapter. If the key fob leaves the allowable range, the car owner is informed about it.
4. Auto engine start. The start of the power unit can be carried out remotely on command or at certain events. For example, as a result of lowering the air temperature level to a specific threshold set by the user.
5. This alarm model is equipped with a tilt and shock sensor built into the transceiver unit. The device allows you to record the movement of the body, including its evacuation and jacking. It is possible to remotely configure the controller using a communicator.
6. At additional connection GSM-module, the user will be able to control the alarm through a mobile device. Alarms can be configured to send alerts and alerts to the user's phone.
7. The presence of flexible service channels that are used to control additional electrical equipment. This refers to the systems for adjusting the seats for the driver, folding side mirrors, emergency and light alarms.

In accordance with consumer reviews, the main drawback of the B94 alarm is frequent false positives. But such a problem in practice is due to an incorrect setting of the shock sensor. With proper sensitivity adjustment, this can be avoided.

How to install?

Before installing the anti-theft system on a car, the user must de-energize the on-board network. To complete the task, the cable with the negative terminal clamp is disconnected from the battery in the engine compartment.

Wiring diagrams

Electrical card for connecting the microprocessor module Starline B94:

Correspondence of controls on the main and spare key fobs Starline B94

Description of the commands that the communicator executes:

Designation of symbols on the screen of the Starline A94 communicator

The designation of the indicators of the key fob with the article 568886 of the Starline B94 alarm:

1. The option of remote start of the engine in automatic mode according to the indications of the alarm clock is enabled.
2. Autostart of the power unit by timer, at time intervals.
3. Remote start of the motor by temperature indicators.
4. Emergency or after-sales service anti-theft system.
5. Diesel engine turbo timer. The power unit after turning off the ignition will work for several minutes at idle. This will eliminate the rapid wear of the structural components of the motor.
6. Automatic arming. If an accidental shutdown of the protection occurs and not a single door opens, then after 30 seconds it will be reactivated.
7. immobilizer mode.
8. The option to block the keys on the remote is activated.
9. Indication of the battery charge in the key fob. If the icon blinks, then it's time to change the battery.
10. The alarm mode has been triggered as a result of the activation of the shock sensor.
11. Motor temperature indicator.
12. The option "Anti-robbery" is activated.
13. The car engine is running.
14. Indicator of operation of the GSM-module, built-in or external, connected additionally.
15. Open luggage compartment in the car.
16. Indication of the warning or alarm level of the sensitivity sensor.
17. The vehicle's ignition is on.
18. Scoreboard with the current time.
19. The timer function is activated.
20. The alarm is on.
21. Indication of the quality of the connection between the pager and the transceiver.
22. The siren has sounded as a result of activation of the sensitivity controller.
23. Silent mode of protection or protection with disturbing signals of a siren.
24. blocking door locks enabled or disabled.
25. The handbrake is not tightened or the pedal is depressed.
26. A personal password has been set to control the alarm.
27. The algorithm of action with mechanical transmission is chosen.

How to set up a keychain?

The binding of a new remote control must be carried out with the car security turned off, while:

1. » is pressed seven times to activate the service mode. After that, the key is turned in the lock to turn on the ignition. In confirmation of entering the programming menu, the siren will emit 7 beeps.
2. The first and second keys of the communicator are pressed simultaneously. The device should play a sound pulse. This step is repeated for each pager assigned.
3. After the binding process is completed, the ignition in the car is turned off. Light fixtures blink three times.

Function Programming

Features of setting options are presented in the table:

To program options, follow these steps:

1. Button 2 or 3 of the communicator is clamped and held. There is no fundamental difference in which key to press. The control is released when the pager double-beeps. The lower row of indicators on the display of the device will blink.
2. Use buttons 2 and 3 to select the desired character on the screen.
3. To activate the required mode of operation, the first button of the key fob is pressed. If the selected function was enabled, then “clicking” on button 1 will disable it.

How to enable and configure autorun?

To start the engine remotely on command, the user must first hold down the first key until the melody appears, then “click” on button 3. An indicator with the inscription “ZPUS” should appear on the pager screen. Also, the display will show the time during which the power unit will work.

To stop the engine started remotely, you need to hold down the first button, and then briefly “click” on the fourth. To extend the engine run time by five minutes, control element 1 is held down, then key 3 is pressed.

Features of setting up autoruns:

1. To start the motor on an alarm clock, the cursor on the display is moved to the position of the corresponding indicator, after which the first button is pressed. The key fob will emit a beep, the vehicle headlights will blink once. During the next five seconds, the communicator screen will display the time left until the start.
2. The start of the power unit by timer is performed in a similar way, only the cursor must be moved to the position of the hourglass icon. After selecting a character, the first key is pressed. The pager screen will display the start period time for four seconds. With the help of button 1, the operating parameters are selected, with each “click” the value increases by two hours. After the function is configured, the first key is held down for a long time until a signal appears.
3. To start the engine by temperature, the cursor must be moved to the indicator in the form of a thermometer, and then “click” on button 1. Using the same key, the operating parameter for starting is selected. With each press, the start temperature of the power unit drops by 3 degrees. After selection required values the first button is held down for a few seconds until the pager beeps.
4. To disable autorun, similar actions are performed. The user must move the cursor to the indicator in the form of an alarm clock, hourglass or thermometer, and then press the first button. This will disable the feature.

The channel "Andrey Chibisov Interesting in Details" in his video showed what problem a car owner may encounter when setting up autorun on the B94 alarm.

Slave mode

To activate slave mode you will need a computer, while the algorithm of actions will be as follows:

1. The alarm CAN block is connected to the laptop using a USB cable. If there is no corresponding connector on the module, then a special adapter board will be required for connection.
2. The programmer starts up.
3. Slave is selected in the opened window. You must check the box next to the mode support item.
4. To replace the settings with new parameters, click the "Save" button. The user can then control anti-theft complex using the key fob from the standard central lock.

Reset

To reset all parameters of the B94 alarm with auto start to factory values, the following actions are performed:

1. With the ignition off, the service mode entry button is pressed nine times. Then the key is scrolled to the "ACC" position of the lock. The alarm siren should sound 9 times.
2. Button emergency mode maintenance is pressed once. The siren should sound.
3. The first key on the primary or secondary pager is pressed. If the alarm operating parameters are reset to factory settings, one siren will sound.
4. To leave the settings menu, the ignition in the car is turned off.

Emergency shutdown of the alarm

Algorithm for entering a personal password to disable the anti-theft system:

1. The car door is opened with a key. The alarm mode will go off.
2. The car turns on the ignition. The service mode entry button is used to enter the first digit. The number of keystrokes must match character 1 of the password. After that, you can turn off the ignition. If an unambiguous code is used for protection, then after its introduction, the armed mode will be disabled.
3. The next character of the code is entered, the ignition is activated. The emergency button is pressed several times to enter the second digit of the password. Then the ignition is turned off.
4. The third character of the code is entered in the same way.

Download instructions for installation and operation of Starline B94 and D94 alarms of various modifications in PDF format

Download service manuals for installation and control of B94 and D94 systems of various versions, please follow the links:

How much does an alarm cost?

Approximate purchase prices anti-theft systems Starline 94 series:

Video

The New Elektronika channel in its video showed the process of controlling the Starline B94 car alarm using mobile phone.

StarLine B94 it is a security and telematics complex with intelligent automatic engine start, with an unscannable dialogue control code, built-in multi-system CAN, a 512-channel anti-jamming transceiver with a range of up to 2 kilometers and a shock-resistant remote control. Optional GSM-GPRS, GPS-GLONASS module allows you to control the system using a mobile phone, determine the location of the car. Dialogue control code with individual encryption keys eliminates the possibility of electronic hacking. The 512-channel narrow-band transceiver ensures stable operation of StarLine B94 in the presence of extreme urban radio interference. Built in CAN system the module allows the StarLine B 94 system to work correctly on most models of modern cars.

DOWNLOAD user manual StarLine B94

Intelligent auto start allows you to use remote and automatic start of the car engine according to certain temperature or at a set time. Continuous automatic control over the communication channel ensures that the key fob is in the zone of stable reception of signals from the alarm system. If this zone is left, the key fob informs the car owner about it. The 3-axis tilt and impact sensor quickly detects any movement of the vehicle and is instantly triggered upon impact. Flexible service channels allow you to program the parameters for controlling the light signaling, folding mirrors and setting the driver's seat. Due to the new design and a hidden antenna, the reliability of the design of the key fobs has significantly increased, the control has become as simple and clear as possible.

Security zones in the car and their control:

Engine (blocking relay, digital radio relays);

Hood, trunk, doors, brake pedal, parking brake (limit switches);

Ignition system (control of the input to the ignition circuit);

Body (tilt sensor, shock sensor);

Salon (additional sensor).

The system performs the following protective and anti-theft functions:

Security with sound and light alarms;

Sending alarm signals to a keychain with a liquid crystal display;

Silent activation of the security mode;

Silent security mode;

Protection when the engine is running;

Activation and deactivation of the security mode without using a key fob;

Alarm management and monitoring of its status via GSM channel ( GSM module- option);

Automatic activation of the protection mode;

Immobilizer;

Anti-robbery;

- "panic";

Programming a personal system shutdown code;

Engine blocking;

Programming of two step removal of blocking of the engine.