How to properly install a Jaguar TEZ B car alarm and detailed instructions for its use. Overview of the Jaguar alarm with and without auto start - operating instructions Operating instructions for the jaguar ez beta alarm

In this article, we will try to briefly talk about one of the best car protection devices on our market - Jaguar alarms Ez-beta.

This security system will delight car owners not only with reliability, a wide range of options, but also with ease of use, and most importantly, with the best price.

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

In sum, you get an excellent product that will provide you with required level protection and will seem very reliable in operation.

Popular car alarm Jaguar models Ez-beta is intruder car system, main feature which is a two-way communication. The advantage of the device is the menu of the four-button key fob, created with the help of icons that are understandable in fact on an intuitive level.

Having read the instructions almost once, the owner of the car will not experience any difficulties in operating the device. Using the key fob, the owner of the car has the ability to start all types of engines - starting from
gasoline and diesel, ending with a turbocharged one, while being at a certain distance from the car.

The developers of the device have created a unique algorithm for encoding the radio signal; together with excellent protection against a possible attempt to scan or intercept, car alarms on modern market practically has no analogues, given the price category.

Functional parameters of the system

Let's list now strengths car alarms that make it one of the best in its category.

• Firstly, the device creates conditions for increased protection against theft.
• Secondly, this system provides reliable protection, which avoids the risk of unauthorized recording of additional key fobs.

In addition, the developers foresaw the option of two engine locks, as well as an immobilizer function.

A special program has been created for the Jaguar Ez-beta car alarm in case the car is captured by robbery. In this case, the Anti-Hi-Jack mode activates an active and safe shutdown of the engine. The option works either automatically or by using the key fob.

In the functionality of the device, the option of priority unlocking of the driver's door is also provided. This means that intruders do not have a chance to get into a car that was disarmed due to the rear and front right doors.

One of the best examples of Jaguar Ez-beta car alarms is the ver.2 model, which is reliable and easy to use. In addition to the advantages already listed, we note that the device controls six security zones within 1,200 m.

Another benefit of ver. above analogues is the “car search” option, which greatly simplifies the search for your car, which is especially convenient in the dark or in a large parking lot.

Jaguar Ez-beta security system models boast

1. Key fobs - original multifunctional and color LCD displays;
2. A program of pictograms, through which the status of six protection zones is monitored;
3. Covered with a ball of rubber, which eliminates the risk of the key fob slipping in the user's hands;
4. System status monitoring, operating at a distance within 1,200 m;

It is impossible not to dwell on a number of, one might say, secondary functions that are important in their own way and provide additional levels of comfort and reliability.

The car alarm consists of a number of components. It is worth noting the presence of a three-button programmable transmitter. This instrument has an LCD display and two-way communication.

We list other additional features and features of car alarms. Jaguar Ez-beta Models:

Service functions

Jaguar Ez-beta models are downright crammed with a variety of service functions, the use of which allows you to increase the comfort of using a car.

For example, let's call the "Comfort" function, which concerns the process of arming the security system and consists in providing a delay for a certain (programmed) time for turning off the interior light. By the way, it is possible to carry out arming without the use of a transmitter, that is, a key fob.

We have already mentioned the next service function - this is the "search for a car" option. By activating this function, you can easily figure out where your car is, due to the sound and light signals it gives.

If you need to leave your car for a short time, then you can turn on the security system even when the engine is not turned off.

Thus, we were convinced that the Jaguar Ez-beta models are modern examples of security systems for cars - with multi-level sophisticated protection and simplified control. That is, there is everything that the owner of the car needs.

When buying a car, every owner cares about its safety. Exist various ways to secure it. One of the reliable security systems is the alarm system from the manufacturer Jaguar. The article discusses its features, capabilities, pros and cons of the system, and provides instructions for use.

[ Hide ]

Model Features

Jaguar car alarm is represented by several dozen security systems. On the considered car alarms, a powerful transmitting device with a range of about 1.5 thousand meters is installed. The alarm response is only 2-3 milliseconds, which is a record. The system is equipped with auto start, it is possible to use Smart Key technology, which allows you to open a car without keys (the author of the video is TheAAG999).

System Capabilities

Jaguar car alarms have a standard set of features:

• remote;
• silent arming and disarming;
• you can control the opening of doors while driving;
• the possibility of disarming when the key fob is lost;
• calling the owner of the car if the security system worked;
• radio interference protection;
• panic mode;
• when turned on, the alarm performs self-diagnostics.

Instructions for use

Installation of car alarm Jaguar, despite a large number of details, can be made by hand.

How to install?

Installation requires a standard set of tools.

It is important during installation to choose the location of the sensors and the main elements:

• control unit in the passenger compartment, usually behind the dashboard;
• it is better to place the siren in the engine compartment;
• the limit switch is placed on the protected surface of the machine body;
• place the shock sensor preferably closer to center line car;
• the signal reception sensor and antenna are mounted on the windshield;
• the secret button "Valet" is placed in a secret place;
• wires should be laid away from sources of electromagnetic interference.

Installation is carried out according to the scheme, which contains color coding to ensure correct connection.

How to setup?

The alarm is configured using a three-button remote control with two-way communication and an LCD display.

The Jaguar alarm performs its functions either according to the settings or by pressing the keys on the key fob.

Button assignment:

• button 1 is programmable, it is used to start and stop the engine at a distance;
• button 2 selects a command by quickly moving the cursor on the screen, the trunk is unlocked;
• buttons 1 and 2 select the panic and search mode;
• button 3 controls the position of the cursor on the screen, turns off the notification signal, is used to set the time, timer, etc.

Comes with alarm key fob one-way communication, which can also be used to control the alarm.

Possible malfunctions

During operation, the following are possible:

• incorrect operation due to the high sensitivity of the exposed shock sensors;
• incorrectly mounted alarm components;
• the batteries on the key fob have become unusable;
• keychain is broken
• the antenna is faulty;
• damaged wiring;
• the battery is discharged;
• system settings failure.

The safety of the vehicle depends on the serviceability of the signaling.

Pros and cons of the anti-theft system

Despite the variety of models, alarms have a number of common advantages:

• almost all products have a monitor that reflects the state of the car;
• the system is well protected from hacking;
• a wide price range, allows you to choose a model according to financial capabilities;
• It has guarantee period operation;
• complete with detailed instructions for installation and use;
• quality meets international standards.

Disadvantages relate to individual models, there may be discrepancies in the distances of the signal indicated in the instructions.

Issue price

Jaguar car alarms are presented in a wide price range.

Security systems under the Jaguar brand provide reliable protection for cars equipped with gasoline and diesel engines. Guided by the instruction Jaguar TEZ B, the owner can independently install and configure the security system.

[ Hide ]

Description and specifications

Security complex Jaguar TEZ B was produced in China by Saturn Marketing Ltd, today the signaling is not produced. According to its parameters, the system is almost a complete copy of A9 or KGB FX-5. Many components of these brands are suitable as spare parts for the TEZ B complex. According to the owners, the head units of the TEZ B and Twage A9 systems are completely interchangeable.

Car alarm Jaguar TEZ B (Beta) has the following technical parameters:

• the base frequency of the receiver and transmitter is 433.92 MHz;
• distance of stable transmission of commands - up to 600 m;
• distance of receiving notifications from the car - up to 1200 m;
• rated supply voltage - 12 V;
• allowable supply voltage - from 9 to 16 V;
• current in standby mode - no more than 25 mA;
• number of security zones - 6;
• memory capacity for key fobs - 4 cells;
• class of execution for water protection for the siren - IP54;
• protection class of other components - IP50.

The radius of reception and transmission of signals by the control panels of the Jaguar TEZ B security complex depends on the operating conditions. In dense urban areas, saturated with radio interference, the receiving distance is reduced by 5-6 times.

The car alarm is equipped with wiring harnesses with built-in fusible links, the ratings are indicated in the table.

The system uses relays and wires designed for the operating currents indicated in the table.

Equipment

The alarm is supplied in a cardboard box, the set consists of the following components:

• the main module of the system;
• the main keychain, equipped with three buttons, two-channel communication and a monochrome LCD screen;
• an auxiliary key fob equipped with four buttons, a single-channel operation mode and a command transmission control indicator;
• transceiver unit, including antenna, driver call button and metering sensor temperature regime in the cabin;
• shock measurement sensor, complete with wiring harness;
• non-autonomous siren;
• control light diode equipped with a wire and a plug for connection;
• setting button, complete with wire;
• additional button for turning on anti-robbery, equipped with a connecting harness;
• a switch installed under the hood or trunk lid panel;
• a set of wires of the Molex type, intended for switching the main module;
• additional Molex harness equipped with wires of increased cross-section for the remote start system of the car engine;
• Molex harness for connecting the alarm to the central locking control unit;
• warning stickers (two pieces);
• Jaguar TEZ B manual for use, setup and installation;
• brief memo;
• warranty card form.

General form Jaguar TEZ Beta kit

Key Features

The Jaguar TEZ B security complex provides the owner with a number of opportunities:

• activation of sound and (or) light indicators when receiving data from sensors;
• informing the owner about events by sending a message to a key fob with a display;
• it is possible to remotely turn on the panic mode;
• built-in additional immobilizer;
• anti-robbery (with the possibility of deactivation at a distance);
• additional possibility of turning on the anti-robbery mode (by a button in the cabin);
• non-volatile state memory;
• it is possible to guard a car with a working power unit;
• the ability to work in security mode with shutdown and siren signaling;
• rearrangement of protection;
• two-step control of blocking of locks;
• additional channels for controlling auxiliary circuits;
• search for a vehicle in the parking lot;
• remote start by several parameters;
• the possibility of extending the operating time of the motor;
• calling the owner from the salon;
• possibly emergency shutdown or connecting the system using the service button.

Advantages and disadvantages

According to the owners, the alarm has positive aspects:

• optimal set of functions;
• convenient control of the launch of options through the key fob;
• Availability remote start;
• good range of remotes;
• there is a channel feedback;
• affordable price compared to competitors.

Users note a number of shortcomings Jaguar systems TEZB:

• the system is discontinued, so there are difficulties with ordering spare components;
• during operation, delamination and destruction of the conductive tracks on the printed circuit board occur;
• over time, the buttons on the main key fob fail;
• one limit switch was supplied in the kit;
• simple command encoding algorithm, subject to interception and hacking;
• control problems are possible due to desynchronization of key fobs.

The emergency disarming of Jaguar TEZ Beta is demonstrated in a video filmed for the sigmax69 channel.

Rules for installation and connection

1. The main unit is mounted in the depth of the instrument panel. The installation site should not be located near the air ducts of the climate system or the control units of the vehicle's standard electronics. The block connector is installed downwards, which provides additional protection against condensation that may accumulate in the plug. The module is fastened with self-tapping screws through standard fastening points or plastic ties. The manufacturer prohibits the installation of the unit in the engine compartment due to the leaky design of the unit.
2. The light diode is located anywhere in the cabin, as far as the standard wire allows. The installation location must ensure the visibility of the device when working with the setting button. Also, the diode should be visible from the outside of the car, since its operation can determine the state of the system. If the element is installed in the instrument panel, then before making a hole, it is necessary to make sure that there are no vehicle control components or wiring harnesses under the panel. For installation, a hole with a diameter of 7 mm is required. The diode is fixed by friction or by applying glue or sealant.
3. To install the tuning button, use the inside surface of the instrument panel, center console or mounting block. The key should be hidden, but the owner should have relatively quick and easy access to it. The button is fixed to the interior details using cyanoacrylic glue or double-sided tape.
4. Install shock sensor. The manufacturer recommends placing the unit on the engine bulkhead from the cabin side. When attaching, it is better to use self-tapping screws, as they guarantee a rigid fixation of the sensor that does not weaken over time. The device must be placed at an accessible point, as it is equipped with an adjustment potentiometer, which is required during the setup and operation of the security complex.
5. Place the antenna module on the inner surface of the windshield. The block is placed on the upper edge with a distance of at least 50 mm from the car body. The place of installation of the module should not be under the metallized light-protective film and under direct sunlight.
6. The siren is mounted in the engine compartment. The installation point must provide protection from outside access (for example, through the bottom of the car), and be away from sources of moisture and heat. Installation of the siren is carried out with regular mounting strips and self-tapping screws. After installation, the horn is turned down to provide additional protection against condensate.
7. Limit switches are mounted on metal body panels connected to the negative terminal of the battery. The place of installation of devices should not be located in the area of ​​accumulation or flow of water. It is best to put the switch inside the perimeter rubber seal, which will provide good protection node and extend the service life.

How to install?

Before you start installing the alarm, you must:

1. Read the setup and installation instructions. Analysis of the manual allows you to pre-determine the installation points of the components of the security complex.
2. Use a digital measuring device. Low resistance probes or testers are not permitted. Testing the circuits of modern cars with such devices can lead to errors in control units or component failure.
3. If the car is equipped with a standard audio system with a code password, then you need to make sure that it is available. When the battery is disconnected from the car, the radio goes into a locked state, which can only be disabled by entering a code. On a number of machines, airbags are installed that record an error in the control unit when the supply voltage fails. Information about such design features available in the owner's manual for the vehicle.
4. If the battery does not disconnect, it is recommended to remove the interior lighting circuit fuse. This will avoid discharging the battery, because when installing the alarm, the doors remain open for a long time.
5. It is recommended to lower the door windows all the way down or open the trunk and fold the rear seat. Such a precaution will avoid blocking the installer in the cabin if the security system is accidentally turned on.
6. When laying wires, ensure that there are no contacts with elements of the ignition system and moving vehicle controls. When using one-piece joints, they must be carefully twisted, connected by soldering, and then insulated pvc tape or heat shrink tubing.

After installing the components, the wiring harnesses are laid:

1. Install power cable antenna module into the five-pin connector located under the flap on the head unit.
2. Connect the sensor with a four-pin cable. Sensitivity is adjusted later.
3. Install the two-wire diode harness.
4. Install a similar service button wire. The cables are installed in the connectors located under the hinged cover.
5. Install the power connector.
6. Connect the main wiring harness.

Connection diagrams of the main elements are shown below.

Location of icons on the screen

Description of the icons responsible for launching the complex functions:

• A - anti-robbery;
• B - additional channel No. 3;
• C - start on temperature values;
• D - daily repeated start;
• E - start from the remote control;
• F - quiet mode of operation;
• G - standard mode (with siren);
• H - disable the shock sensor;
• I - programming and settings mode;
• J - request current state complex and temperature values ​​in the cabin;
• K - additional channel No. 2;
• L - unlocking the luggage compartment lock.

Description of the icons designed to display the status of the complex and the vehicle:

• 1 - battery charge on the keychain;
• 2 - additional channel No. 2;
• 3 - start by temperature;
• 4 - indication of a running motor;
• 5 - the trunk lid is not closed;
• 6 - informing the owner with a built-in vibration motor (without the buzzer beeping);
• 7 - at least one door is not closed;
• 8 - setting;
• 9 - automatic re-arming;
• 10 - "silent" protection;
• 11 - security with accompaniment of the alarm by the sounds of a siren;
• 12 - the hood cover is not completely closed;
• 13 - there was a blow to the car;
• 14 - the parking brake is disabled (the lever is lowered);
• 15 - locked locks;
• 16 - open locks;
• 17 - activity of the receiver installed in the key fob;
• 18 - two-way communication mode is working;
• 19 - receipt of a call signal from the passenger compartment of the vehicle;
• 20 - charge conservation;
• 21 - ignition support is on;
• 22 - alarm clock;
• 23 - time indication corresponds to the first half of the day (AM);
• 24 - indication of the time after lunch (RM);
• 25 - daily repetitive start;
• 26 - four-digit numeric field, used to display time or temperature;
• 27 - temperature scale, turns on only when data from the temperature sensor is displayed;
• 28 - timer.

Remote system control

To control the operation of the complex, key fobs of two types are used. The display communicator includes a miniature speaker that is used to provide confirmation and warning sounds and melodies.

The two-way communication control panel has three buttons:

• programmable A;
• functional B, the value of which is selected by placing the cursor on the required function;
• cursor C, which is also used to turn on the backlight of the display.

When a command is given, it is displayed on the screen of the Jaguar TEZ B alarm control panel that was used to generate the signal.

Button assignment.

On the additional keychain four buttons installed.

General view of the main keychain General view of the spare key fob

Key fob programming

A distinctive feature of the head key fob of the Jaguar TEZ B system is a large number of customizable parameters.

Button customization

To configure button A on the head console, you need:

1. Make two quick presses on button C to start the cursor movement.
2. Pause for 1-2 seconds and by pressing button C select the desired function that button A will perform. In most cases, it is configured to turn the guard on and off (icon G or F).
3. After placing the cursor on the desired icon, press C and hold it for six seconds - until a double beep is heard, which is complemented by a triple one.
4. Press A to check if the function works.
5. If you want to reassign a function, then the owner needs to carry out the procedure again.

Programming scheme for button B on the main remote control:

1. Press C twice quickly to start cursor movement.
2. Each successive press will move the cursor over the icons at the bottom of the screen. The movement is made in a circle. After placing the cursor on the desired icon, it is activated by briefly pressing button B.

Setting the clock, alarm and timer

Watch programming:

1. Press button C and keep it pressed until the buzzer sounds twice. At the same time, the blinking mode of the clock field will turn on.
2. Set the clock by pressing A and B (increase and decrease the value, respectively). It is possible to quickly change the value by pressing and holding the button.
3. Press C and go to the minutes setting, which is done by analogy.
4. Finish tuning by pressing and holding C until a single sound is emitted by the buzzer.

Setting the alarm time:

1. Enter the settings menu by analogy with setting the clock.
2. Press C until the blinking alarm icon turns on (in diagram 22).
3. Set the alarm value in the same way as setting the clock.
4. After setting the minutes, you must press C and get into the submenu for turning on the alarm clock. Switching on is performed by buttons A and B (the inscription on the screen is On and Off, respectively).
5. Exit setup mode. When the alarm clock is active, the icon 22 will remain on the screen. To interrupt the alarm signal, a short press on C is used.

Timer programming:

1. The setup follows the same steps as programming the alarm clock. Icon 28 is used to start, when setting the time, a value of no more than 19 hours 59 minutes is allowed.
2. An alternative method is to simultaneously press the C and B keys. The timer value is changed by briefly pressing C and B together and selected from the range - 10/20/30/60/90/120 minutes.
3. When the zero value is reached, eight short beeps are given. Disabling timer notifications is possible by pressing C.

Setting up an alert

The key fob has two types of informing - a buzzer or a vibrating alert. To change the type, the simultaneous action on the buttons C and A is used. When the silent mode is activated, the icon 6 is displayed on the screen. When the buzzer turns on again, the indicator goes out. Signaling by a buzzer and a vibrating alert is identical in terms of the number of pulses. For example, if a command is confirmed in sound mode with a single buzzer sound, then in silent mode, a single vibration signal will be given.

Power saving mode setting

To increase the battery life, an energy-saving mode is provided. When it is activated, the receiver is turned off, which occurs two minutes after disarming. When arming, energy saving is deactivated.

Service activation procedure:

1. Press C to select icon 20.
2. Then press A or B to enable or disable the function. When power saving is active, icon 20 lights up on the screen, and two minutes after the system is turned off, indicator 17 goes out, indicating that the receiver is inactive.

If a command is transmitted in the power saving mode, then the receiver is briefly (for two minutes) turned on. After that, the key fob will again go into charge saving mode.

Recording a key fob in memory

If you purchase a new key fob, it must be registered in the system memory:

1. When the security is disabled, the ignition must be activated.
2. Press and hold the setting key until the siren beeps four times.
3. Pick up a programmable remote control with a display and simultaneously hold down buttons A and B. If a key fob is configured without a screen, then keys C and D are pressed on it. Confirmation of the correctness of entering the code into memory is a single short signal siren.
4. If you plan to record several key fobs, then the interval should not exceed five seconds. If the time is exceeded, the setup procedure will be automatically exited. The owner should remember that each subsequent programmed remote control is confirmed by an increasing number of signals.
5. After recording the last remote control, you must turn off the ignition. The system will give a five-fold flash of the emergency flasher, which is a confirmation of the exit from programming.

When writing control panels to the Jaguar TEZ B system, remember that the start of programming leads to resetting the memory cells. Therefore, old keyfobs must be overwritten, otherwise they cannot be used.

Key fob firmware for Jaguar TEZ beta is shown in the video from the sigmax69 channel.

Main Modes

Main control functions:

1. Arming is performed by button A (pre-programmed). Icons 15 and 11 are activated on the screen, sound signal buzzer and light and sound alarm system of the car. Switching off is done by button A, icon 16 lights up on the screen.
2. Silent security is activated by the cursor method, by selecting the F icon. The numbers 15 and 10 are active on the screen, the key fob buzzer sounds, the emergency flasher flashes on the car. Switching off is carried out in the same way, the icon 16 remains active on the display.
3. Security with a running power unit is used during short-term stops that require leaving the passenger compartment. To enable the option, you need to tighten the parking brake, then press A until a triple flash is given by the turn signals and a melodic signal is given. After that, icon 4 should be activated on the display, and the control diode will switch to the continuous operation mode. You can then remove the key from the ignition and get out of the car. The system is activated by pressing button A, icons 15, 11 and 4 are active on the screen. The shock sensor and the ignition system are excluded from the number of protected zones. The locks are unlocked by pressing A.
4. Panic is activated by simultaneously pressing and holding buttons A and B with the ignition off.
5. The search for the machine is carried out by simultaneously pressing the buttons A and B. The machine will give a response signal by six times the siren and light alarm. If the silent mode of operation is active, then only the light signaling will function.

Autorun settings

The Jaguar TEZ B security complex allows you to start the engine in two modes:

• remote (on a signal from the remote control);
• automatic (according to the programmed program).

For remote start, two algorithms are possible:

• cursor;
• button.

To start using the cursor method, you must select the start icon E and activate it by pressing button B.

With a push-button start, pressing and holding the A key for three seconds is used. After that, ignition support is turned on and the first attempt is made to scroll the shaft with a starter, accompanied by three flashes of lamps and a triple siren. At the same time, the key fob buzzer will sound a melodic signal. If the start was successful, the car will give an indication in the form of a triple operation of the emergency gang, the key fob will play the melody again. The indicator diode installed on the vehicle will switch to continuous operation mode.

If the first start fails, the alarm will make three additional attempts, increasing the scrolling time by 0.2 seconds each time. If the fourth attempt is unsuccessful, the Sp icon will turn on on the display and the buzzer will sound four times, indicating an error. At the same time on the car there is a fourfold operation of the light and sound alarm.

When setting the auto start of the Jaguar TEZ B, the time of the first scroll of the starter is selected, which is 0.8, 1.2, and also 1.8 or 3.0 seconds. When starting the engine, the starter is turned off ahead of time, which prevents its breakdown.

When the engine is running, the following icons are on on the key fob screen:

• when starting, the state of the car is displayed and the text inscription St is turned on (displayed in the clock field);
• when the motor is running, the corresponding icon is lit, the operating time is displayed on the clock field (5/10/15/20 minutes, depending on the program);
• 60 seconds before the end of the warm-up time, the text icon r01 will turn on in the clock field;
• after the engine stops, a message like r00 will appear, the engine running icon will turn off.

The owner of the car can extend the warm-up time of the engine:

1. With the unit running, select the E icon with the cursor and confirm the operation by pressing the B button.
2. Each press indicates an increase in the operating time of 5 minutes. You can increase the warm-up time by 20 minutes at a time. An increase in time for five minutes is confirmed by single signals of the emergency gang and siren, as well as a short sound of the key fob. The clock field on the screen displays the total time remaining before the power unit stops.

The necessary conditions

There are two factors to consider when programming the system:

1. Transmission type. If the car is equipped with a manual transmission, then it is necessary to cut the annular loop located on the head unit. On the automatic box, the loop is saved.
2. Motor type. When programming diesel unit the procedure for delaying the cranking of the shaft by the starter after the ignition circuits are turned on is activated. The pause is necessary to warm up the glow plugs installed on the engine. Candles turn on only at the first attempt to start.

By temperature

The security complex has the ability to start the engine without the participation of the owner according to the programmed algorithm and data from the temperature sensor.

According to the instructions for Jaguar TEZ B, the sensor records the temperature values:

• -5 degrees;
• -10 degrees;
• -20 degrees;
• -30 degrees.

When the programmed threshold is reached, the sensor sends a signal to the head unit, which activates the start-up procedure. The operating time of the power unit is configured separately.

The number of restarts is also programmed, which must meet the requirements:

• the interval of repeated launches cannot be less than two hours;
• the number of restarts per day cannot be more than six times.

Launch enable algorithm:

1. Move the cursor to icon C, then confirm the execution by pressing button B.
2. After passing a single sound and signal confirmation, the key fob melody should turn on on the car. In this case, icon 3 lights up, the temperature threshold will be displayed on the clock field. The control diode will work in the mode of supplying a series of triple flashes.
3. If you want to disable the function, then this is done by selecting icon C and pressing B again. The car will have a double light and sound indication, a melody will turn on and icon 3 will go out.

By time

The owner can set the daily automatic warm-up at a specific time.

Mode programming is as follows:

1. Select the D icon and confirm the execution by pressing the B button. After a single working out with a light and sound alarm, the key fob will give a melody, and the icon 25 will be activated on the screen. The diode will blink with a series of flashes consisting of paired pulses.
2. When the function is turned on for the first time, the power unit starts and warms up. The operating time is set during system programming. Restarts will be performed after 24 hours.
3. Disabling the mode is similar to activating it. Confirmation is the double activation of the light and noise alarm and the deactivation of icon 25 on the display.

If the owner is going to start moving before the end of the autorun time countdown, he needs to:

1. Disable the security mode with a simple short press on button A. The screen will display the icons of open locks and a running engine.
2. Open the door and turn on the ignition. This procedure must be completed within 30 seconds, otherwise the guard will automatically reconnect.
3. After switching on the ignition, release the parking brake lever. The vehicle will give a single flash alarm, confirming the readiness to move.

Clarification for vehicles with manual transmission

On vehicles equipped with a manual transmission, programming of the neutral position of the gearshift lever is required. This rule came about for security reasons. Programming is done before each scheduled automatic engine start. The alarm system does not accept signals from the standard neutral position sensor installed on some vehicle models.

The procedure for activating the neutral on the mechanics:

1. Set the gearshift lever to the neutral position. The engine is in running condition.
2. Raise the parking brake lever.
3. Turn the key in the lock to the "off" point and remove it. The power unit must continue to work due to active system ignition support.
4. The owner has 30 seconds at his disposal, during which he must leave the vehicle and close all body panels equipped with limit switches. After that, you need to press button A on the key fob. The motor stops immediately or continues to cycle through the turbo timer. If the owner does not arm the guard after closing all doors, the engine will continue to operate for 30 seconds or until the expiration of the turbo timer. Then the power unit will stop. After this procedure, the motor is ready for automatic start.

Checking the correctness of the autorun installation

The autostart procedure will fail under the following conditions:

• the ignition system is on (through the ignition lock);
• the hood limit switch is open;
• no signal from the parking brake switch;
• the neutral programming procedure has not been completed (on cars with mechanical box).

If all conditions are met, then autorun should proceed in normal mode. To check the possibility of automatic start, you can test start the engine from the key fob.

Additional options

interesting additional option in the Jaguar TEZ B security system is the anti-robbery start button. After pressing it, a 30-second cycle of the light signals is turned on, and then a 30-second cycle of the siren. At the same time, the operation of the motor is blocked, and the A icon on the key fob screen turns on and flashes.

There are two ways to disable anti-theft:

• during the first 30 seconds - by holding the power button until the siren gives three beeps;
• after 30 seconds of work - by the cursor method, using pressing the buttons B and A.

Additional immobilizer, which is activated when setting up the system. Immo blocks the ignition circuits 30 seconds after the power is turned off. When using the turbo timer, the additional immobilizer function becomes unavailable.

Shutdown is done in two ways:

• by pressing the service button once with the ignition off;
• by pressing button A on the key fob.

Emergency management

If the key fob is broken or lost, the system can be turned on using the emergency method:

1. Turn on the ignition, then, without starting the engine, you need to press the setting button eight times.
2. Turn off the ignition and receive a notification in the form of a single operation of a light and sound alarm.
3. Leave the vehicle interior within 20 seconds and close the locks with the standard key. Wait for the siren to give a single beep, after which the security will turn on.

Shutdown is performed in a similar way:

1. Open the doors, then, regardless of the alarm, activate the ignition. No attempt should be made to start the engine.
2. Within 20 seconds, reach the service button and press it four times.
3. Switch off ignition. After that, a double indication with a beep and an emergency gang should pass.
4. Check the possibility of starting the motor.

Download instructions for installation and operation of the Jaguar alarm in PDF format

The service manual, which will allow you to use and configure the alarm, can be downloaded from the link:

What is the price

Video “Jaguar TEZ Beta key fob programming”

Jaguar TEZ Beta key fob programming introduces the sigmax69 channel.

The Jaguar Tez B car alarm system is a “Deluxe” class system with two-way communication and auto start, controlled by a key fob-communicator with an LCD display. Allows you to control up to 6 security zones, while anti-theft properties are enhanced by two, an immobilizer function and an Anti-HiJack mode.

[ Hide ]

Description and specifications

Description of the main parameters of this model of "signaling" for cars:

• packet data is sent between the transceiver and the pager over a channel with an operating frequency of 433.92 MHz;
• the data range required for stable transmission of commands is about 600 meters;
• the radius of the transceiver in the mode of sending messages to a pager (remote control, key fob) with a display - no more than 1.2 km;
• nutrition security system is carried out from a 12-volt source, therefore, the use of an alarm on a car with a 9 or 24 V network is not allowed;
• the level of current consumption in standby mode is not more than 25 mA;
• the memory capacity of the microprocessor module allows you to enter information about no more than four communicators;
• according to the class of protection of the siren from moisture, the system belongs to IP54 alarms;
• the temperature range of the control unit is from -40 to +85 degrees.

The range of the Jaguar TEZ B alarm is indicated by the manufacturer, taking into account ideal conditions work. The radius may be reduced in densely built areas.

Equipment

Elements that are included in the delivery of the alarm for the car Jaguar TEZ B:

1. The main microprocessor device, made in a black plastic case.
2. Three-button pager for remote control with feedback function. The device is equipped with a display.
3. Spare remote. The device is equipped with four control elements, as well as an LED to control the transmission of a command. The display in the communicator is not provided.
4. Service user manual in Russian for installation, use and configuration of the system.
5. transceiver module. The device is equipped with an antenna adapter, a call button for the car owner, and an interior temperature sensor.
6. Controller for fixing shocks and other physical impacts on the vehicle body. The device is equipped with a harness with wiring for connection to the on-board network.
7. Non-autonomous siren. The package includes a bracket on which it will be installed.
8. Alarm status LED. Equipped with a wire and a block for connecting to the mains.
9. Button for emergency setting of system parameters and after-sales service. It is also equipped with a wire and a block for connection.
10. A button or toggle switch to activate the "Anti-robbery" mode.
11. Limit switch for mounting on the hood or tailgate.
12. A set of cables for switching the microprocessor device and other signaling elements. The set also includes the cables necessary for the implementation of automatic start-up and warm-up of the motor.
13. Warning stickers in the amount of 2 pcs.
14. Consumer note.
15. Warranty card.

Since the Jaguar TEZ B alarm package includes one limit switch, door devices are purchased separately.

Key Features and Benefits

Description of the main functions and capabilities of the Jaguar TEZ B alarm:

1. Installation and use anti-theft system Available for vehicles with manual and automatic transmission. The type of engine - diesel or gasoline - does not matter.
2. Enable alarms based on signals from the main sensor and additional controllers, if installed.
3. Notification of the car owner about the inclusion of warning or alarms sirens.
4. The presence of the "Panic" mode. When it is activated, the siren is turned on, as well as the lighting devices in the car on command from the pager. This option allows you to designate the car as guarded and scare potential hijackers away from it.
5. The presence of an additional immobilizer. "Immo" is a device for blocking the power unit in case of an unauthorized attempt to start it.
6. "Anti-robbery" function. Its essence lies in the forced blocking of the engine in the event of a force capture or theft of a car. If the car happened robbery, the user can activate the option by pressing the toggle switch installed in the cabin. The engine is blocked after a certain period of time so that the attacker drives off to a safe distance from the car owner.
7. Availability of non-volatile alarm state memory. If there is a power outage or a criminal dismantles the system, when the car alarm is turned on again, it will return to its previous mode of operation.
8. Protecting a car with a running engine.
9. Automatic re-arming in case of accidental disabling.
10. Two-stage opening door locks cars. Unlocking can be done using the user's personal password. To unlock the engine, the code is additionally entered after disarming.
11. Availability of additional channels for controlling electrical equipment and devices.
12. Using the "Search" option. Activating it will cause temporary operation of light signals, as well as a siren. This will find vehicle stopped in a large parking lot.
13. The ability to enable and configure the operation of the autostart of the motor in several ways. The power unit can start according to temperature readings or at a certain time. It is also possible to implement autorun by timer - at time intervals.
14. Remote extension of the operating time of a running engine.
15. The ability to control the alarm without a remote control. If the communicator is lost, the service button is used to activate and deactivate the protection mode.

How to install?

In accordance with the installation manual, the installation of the anti-theft system is carried out on a car with the power turned off. For this from battery(battery) it is necessary to disconnect the terminal clamp marked "-".

Wiring diagrams

Cards for connecting the main elements:

General connection scheme Connector assignment Connecting door locks for unlocking in two steps

Installation and connection procedure

You need to install the system in this order:

1. First, the microprocessor module is mounted. The device is located in the passenger compartment, in the most hidden and protected from external influences place. It is recommended to place the unit behind the control box to keep the wires as short as possible. The module is fixed on flat surface using self-tapping screws or double-sided tape.
2. A siren is installed in the engine compartment, away from the cylinder head and adjacent metal surfaces. For fixing, you must first mount the bracket. The siren is located with a bell down to prevent the accumulation of moisture in it. If it is necessary to build wires, only the soldering method is used, and the connection must be made in the cabin. This will avoid possible oxidation of the contacts.
3. The shock and sensitivity sensor is installed in the passenger compartment, preferably on the partition separating it from the engine compartment. Fixation is made on a flat metal surface without the use of plastic or rubber gaskets. Their presence will lead to incorrect operation of the sensor and its false positives. Having installed the controller, it is necessary to make sure that there is free access to its regulators.
4. A transceiver with an adapter is installed on the car glazing. The fixation of the device is carried out on a surface that has been cleaned and degreased in advance. The wire from the adapter is laid to the microprocessor under the lining of the passenger compartment.
5. The emergency entry button for the alarm service mode is placed in the cabin, as hidden as possible. It can be installed under the dashboard and wrapped with electrical tape to disguise. Next to this element, you can also set the activation key for the “Anti-robbery” mode.
6. On all doors or only on the hood are placed Limit switches. When installing, it must be taken into account that the free play of the rod of the devices must be at least 5 mm. It is impossible to mount "limit switches" in drains and places of accumulation of moisture.

Table of features for connecting connectors of the microprocessor module

User manual

In accordance with service manual According to the application, after installation, you need to make sure that the Jaguar TEZ B alarm works. To do this, you need to enable and disable the car protection mode.

Key fob designations and functions

Designation of indicators on the screen Jaguar TEZ B

Description of indicators on the pager screen:

1. Charging the battery in the communicator. If one division remains and the symbol blinks, it is time to change the battery.
2. Second additional channel.
3. The indicator of start of the motor of the car on air temperature.
4. Started power unit icon.
5. The car trunk lid is not locked.
6. Vibration enabled icon.
7. Indicator of one or more unlocked doors.
8. Alarm setting symbol.
9. Enabled option to automatically reactivate protection.
10. Vehicle security mode without sound signals.
11. Car protection with siren signals.
12. The shock sensor has been triggered - its warning or alarm zone is activated.
13. The handbrake lever is not tightened or the pedal is depressed.
14. Protection mode is disabled.
15. The included protection with the closed locks.
16. The transceiver installed in the pager has been triggered.
17. Indication of a two-way communication channel with the control unit.
18. Transceiver operation symbol.
19. Calling the car owner from the salon.
20. Icon of saving energy in the battery of the pager.
21. Low battery indicator in the machine's electrical network.
22. The alarm function is activated.
23. Icon for determining the time of day (afternoon).
24. First half of the day.
25. The symbol of the daily auto-start of the car engine.
26. Scoreboard with the current time or interior temperature in the car.
27. Temperature indication of engine start.
28. Auto timer.
29. A - Anti-robbery mode is enabled.
30. B - activation of the third additional channel.
31. C - the option to start the power unit is enabled in accordance with the readings of the temperature controller.
32. D - daily automatic start of the motor.
33. E - start the car engine on command from the pager.
34. F - quiet mode of the alarm.
35. G - car protection indication with siren signals.
36. H - Disabled sensitivity controller icon.
37. I - enter the programming menu and options settings.
38. J - indicator of requesting the current state of the security system, as well as the temperature in the car.
39. K is the second additional channel.
40. L - opening the tailgate lock.

Correspondence of keys on pagers Jaguar TEZ B

Communicator Key Assignment Table

Key fob programming

Before setting up the remote control, a working power source is installed in the device. The battery is inserted into a special compartment located behind the rear protective cover.

Button customization

Key A is programmed as follows:

1. The C button is double-clicked so that the cursor can be moved on the screen.
2. The choice of the function that the control element A will perform is made. It is best to assign the option to activate and deactivate the protective mode to the button.
3. After selecting the function, the C key is pressed. The control element is held down for 6 seconds until the communicator emits a double beep.
4. Then you should check the operation of the option.
5. The control button B is set in the same way. After selecting the function, this button is pressed briefly to activate it.

Video about setting up a Jaguar TEZ B car alarm

The channel "sigmax69" in his video clearly showed how the controls of the Jaguar TEZ B alarm key fob are configured.

Setting the clock, alarm and timer

To set the clock, follow these steps:

1. Control C on the pager is held down until the communicator beeps. The clock display will blink.
2. Use buttons A and B to select parameters. These controls are used to increment and decrement the clock, respectively. To quickly change values, the keys can be held down.
3. Button C is pressed to enter the minute setting menu. Actions to change the parameters are similar.
4. After assigning the settings, button C is pressed until the sound signal is played.

To change the alarm settings, do the following:

1. The programming menu is entered.
2. Control C is pressed to move to the alarm indicator on the pager screen.
3. Use the A and B buttons to increase or decrease the function values. After changing the parameters, the C key is pressed, this will allow you to enter the submenu of activation and deactivation of the option. Press button A to turn it on, B to turn it off.
4. The programming menu is exited.

The timer is set up like this:

1. The programming menu is entered. With the help of the C button, the indicator is moved to the position of the Timer icon.
2. The A and B keys are used to change the parameters of the option.
3. If necessary, you can simultaneously hold down the controls B and C. The timer readings can be changed using the same buttons.

Setting up an alert

To change the type of alerts, hold down the A and C keys at the same time. When the vibration is turned on, the corresponding icon is displayed on the pager screen. If the buzzer is activated, the indicator disappears from the display.

Power saving mode setting

Turning on the power saving mode is done as follows:

1. The alarm setup menu is entered.
2. The C button moves the cursor to the power saving mode indicator.
3. Controls A or B are used to activate or deactivate the function. When the power saving mode is on and messages are sent to the pager, the receiver turns on briefly, for two minutes.

Recording a key fob in memory

Programming the new communicator Jaguar TEZ B is as follows:

1. When the protection option is off, the key is inserted into the ignition lock and scrolled to the “ACC” position.
2. The button for entering the service setting mode is pressed until the siren plays four beeps.
3. On the pager being registered, the A and B keys are simultaneously pressed. If an additional communicator is being programmed, without a screen, then the C and D buttons must be used. To confirm successful binding, the alarm siren will work once.
4. The remaining pagers are being programmed. The time interval between binding different devices should be no more than five seconds. Otherwise, the alarm will automatically leave the setup menu. After all communicators are registered in the memory of the microprocessor module, the ignition is turned off. The car's lights will blink five times.

Video about programming new key fobs in the memory of Jaguar TEZ B

Taken by sigmax69 channel.

Autorun settings

You need to start the engine remotely on command like this:

1. Control A is held down for three seconds.
2. To increase the warm-up time, the cursor on the screen moves to indicator E. Pressing button B will increase the duration of the motor by five minutes.

Factors affecting system operation

One of the contacts of the Jaguar TEZ B alarm control unit is equipped with a special loop that must be cut to implement autorun. In case of automatic boxes transmission cable integrity is maintained.

There are two factors that affect the autorun option:

1. Gearbox type. If the machine is equipped with a manual transmission, then when setting the alarm, the user must cut the ring loop on the microprocessor block.
2. Type of power unit. When setting up auto start on a diesel engine, the user must activate the crank delay by the starter mechanism. This is required in order to warm up the glow plugs.

By temperature

Setting autostart by temperature is done as follows:

1. The cursor on the pager screen moves to indicator C. To confirm the selection of the option, press the B key.
2. After the key fob works with a melodious signal, the autostart icon by temperature will be displayed on its screen. The LED will blink in triple flashes.
3. To activate the function, press the button, to disable - B.

By time

Setting up automatic start by time is done as follows:

1. On the pager's screen, the indicator moves to the position of the icon D. To confirm, the B key is pressed. The communicator will play a melodious signal, the corresponding symbol will appear on the screen. The LED will start flashing in pairs.
2. During the initial activation, the motor starts and warms up. The duration of the power unit is set in advance when setting up.
3. To disable the option, the same actions are performed as for autostart by temperature. Only the indicator is moved to the position of the corresponding icon.
4. If you want to start driving while the engine is warming up, you must turn off the protection mode. After they open door locks, the user must have time to get into the cabin and activate the ignition in 30 seconds. The handbrake lever is then released. The vehicle will flash a warning light to confirm that it is ready to move.

Features for vehicles with manual transmission

If the car is "on the mechanics", then the user must first prepare the vehicle. Programming is done before each autostart.

The setting is done like this:

1. The gear selector is moved to the neutral position. This must be done before the engine stops in order for the power unit to work.
2. The parking brake lever is raised.
3. The ignition is turned off in the car, the key is removed from the lock. The engine will remain running.
4. Within 30 seconds, the user exits the car, closes all doors and turns on the security mode. After that, the power unit should stall or continue to work if the "turbo timer" option was programmed.

Causes of autorun inoperability

This option is not allowed in the following cases:

• the ignition system in the car is activated;
• the hood of the car or any door is open (such a problem may be a malfunction of the limit switches or the lack of power to the devices);
• the preparation of a vehicle with a manual transmission has not been completed;
• the alarm does not detect a signal from the limit switch mounted on the parking brake lever.

Video about turning on autostart on the Jaguar alarm

User Valery Ershov in his video clearly showed how the Jaguar alarm function works.

Additional options

Setting additional features alarm Jaguar TEZ B:

1. To enable the "Anti-robbery" option, a special button installed in the car's interior is pressed. This will cause the power unit to lock after 30 seconds, and the corresponding indicator will be displayed on the key fob screen. To disable an option, move the cursor to the corresponding indicator and press the B key.
2. An additional immobilizer in the car is activated automatically when the security is turned on. This option cannot be used if the "Turbotimer" function has been previously set. To disable the "immo", the button to enter the service mode of service or the A key on the pager is briefly pressed.
3. To activate the guard on a car with a running engine, the parking brake is raised in the car. This must be done while the power unit is running. Then the A key on the pager is pressed and held for several seconds until the device plays a melody. After that, the ignition is turned off and the key is removed from the lock, the driver must have time to close all the doors in 30 seconds. By pressing button A, the user will turn on the security mode.

Emergency shutdown of the alarm

In case of loss or malfunction of the remote control, the anti-theft system is disabled as follows:

1. The driver opens all doors, which will activate the siren. It is necessary to insert the key into the lock and activate the ignition system.
2. During the next 20 seconds, the user must press the button to enter the service mode four times.
3. The car's ignition is switched off. The warning light will blink twice and the siren will sound. Security mode disabled.

Download instructions for installation and operation of the Jaguar TEZ B alarm in PDF format

How much does a Jaguar TEZ B alarm cost?

Approximate purchase price of Jaguar TEZ B:

Video about the emergency shutdown of the anti-theft system Jaguar TEZ B

This security system is a high-quality security system that completely protects the vehicle from burglary and theft attempts.

Installation of the system and its initial setup can be done by the user. Before doing this, please read the instruction manual carefully.

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

The alarm can be installed on any vehicle with both gasoline engines, and with diesel engines, the voltage of the on-board network should be 12V, and the negative terminal of the battery is connected to the body of the car. A more complete list can be found in the installation instructions.

Right before installation protective system on the vehicle, it is necessary to connect all the wires in trial mode, then once again check the correct connection and only after that connect the battery. If the device is working properly, you can perform a full installation.

If, when installing the alarm, it is necessary to drill any holes in the body of the car, you need to consult with the dealer from whom the car was purchased.

Two key fobs are supplied with the jaguar head unit, one of which is equipped with three keys and a TFT screen, and the second is auxiliary device in case of loss or breakage of the main key fob.

The assignment of all key fob keys can be programmed.
The purpose of the H key is selected during operation, by navigating the screen.

The commands that the security system performs can be performed automatically, or given from the key fob transmitter. The functions of certain key fob keys can be changed by programming.

In addition to the fact that the key fob transmitter with two-way communication, according to the instructions, and a liquid crystal screen can fully realize the functionality of the security system, while the answers that will indicate the successful execution of a particular command are displayed on the liquid crystal screen, accompanied by a sound signal.

Important! If several key fobs are involved in the system at once, notifications will only be sent to the one that issued the last command.

Regardless of which mode works (normal or silent), the system, when the protection of one of them protection zones will instantly send a notification about this to the key fob - the communicator, which will display the indicator of the triggered zone, give an audible signal, and also notify the owner with a vibration signal (in noisy places).

If the main alarm key fob does not work or is lost, you can use the second remote control supplied in the kit. This key fob functions without feedback and, as conceived by the developers of the security system, serves as a temporary replacement for the main remote control. A secondary key fob can implement the main functionality of the system.

Before using the security system, it is recommended that you carefully read the instructions.