What company are plastic windows. Comparison of plastic window profile manufacturers. The best PVC window profiles according to "Price Expert"

Plastic windows have long taken a strong place on the market among other glazing systems. Thanks to their excellent technical characteristics, they create maximum comfortable conditions for living and working. Today, the best plastic windows are produced in Germany, Austria, Turkey and Russia. Which of them are the standard, and which ones are better to refrain from buying?

Technical characteristics of plastic windows

At first glance, a plastic window seems to be a simple structure consisting of a profile, double-glazed windows and handles. But, in fact, which significantly affect the functionality and specifications window.

A high-quality plastic window should have the following parameters:

• reliability;
• durability;
• high level of heat saving;
• moisture resistance;
• soundproofing;
• draft protection;
• protection from dust and insects.

The main one is the heat saving indicator.

Owners of apartments with low-quality glazing know for themselves what problems can be in winter. Cold air pierces through cracks, and even heating system in combination with additional heaters, it cannot cope with maintaining normal room temperature.

If you install the best plastic windows in your apartment, then even at an air temperature outside the window of -5 o C, the air near the window sill will not drop below +20 o C. This effect is due to the complex design of the profile, consisting of several air chambers, as well as the presence double glazing.

Soundproofing is a topical issue for apartment owners whose windows overlook a noisy highway, nightlife or other crowded object. Draft protection is provided by rubber seals installed around the perimeter of the frame, as well as a high-quality three-layer assembly seam. Among other things, plastic windows protect the home from burglars. With each goth, manufacturers improve protection mechanisms, increasing the reliability of both locking devices and the entire profile as a whole. Protect from direct exposure sun rays and infrared radiation will help special films on glass: anti-reflective, tinted, mirror.

plastic profile

Almost all technical characteristics of the plastic structure depend on the profile. Let's consider its main features. Each manufacturer produces a profile according to its own technology. There are: three-chamber, four-chamber, five-chamber and even eight-chamber profile. On finished window it is impossible to see the number of cameras, so there are samples in the offices by which you can study the window in section. All types of profiles are hollow inside and differ in the number, location and thickness of the partitions. Partitions form chambers that are filled with air. As you know, air is a very good insulator. Therefore, the chambers provide good thermal insulation of the profile.

The best plastic windows have a large chamber in the center of the profile, which is called the "reinforcement chamber".

A metal U-shaped or square profile is inserted into this chamber, which performs the following functions:

• gives rigidity to the whole structure;
• increases resistance to wind loads;
• increases resistance to weight loads;
• saves the window geometry.

Additional chambers on one of the sides of the profile provide a tighter fixing of the fittings. The minimum requirements for a plastic window include three chambers and a depth of 60 mm. The best option for the Russian climate - a five-chamber profile with a depth of 70 mm. A high-quality PVC profile is made of a homogeneous material that is resistant to deformation, oil, moisture, solvents and can withstand sudden temperature changes. Its surface should be smooth, even, without graininess and mechanical damage. The exception is profiles with a surface that imitates texture natural materials, for example, a tree.

The plastic profile is absolutely odorless and does not melt in direct sunlight. In addition, it has excellent refractory properties. Unlike aluminum profile, from plastic it is possible to produce window structures of the most unusual shapes and sizes: round, triangular, arched, trapezoidal. The most popular companies producing profiles for plastic windows are REHAU, KBE and NOVOTEX.

1. REHAU - one of the oldest manufacturers of PVC windows. Window designs of this brand occupy the highest positions in sales and quality. after-sales service. Brand products are often installed in medical and preventive institutions, since only safe materials are used in the process of its manufacture.
2. KBE Profile - a modern representative of plastic windows. It is manufactured according to the latest innovative technologies without the use of lead. The cost of structures from the KBE profile is 10% lower than branded counterparts.
3. Windows from the NOVOTEX profile belong to the budget category. It is distinguished by good quality characteristics, perfect whiteness of the front surface and the presence of an original glazing bead with a beveled angle of 35 degrees.

Review-comparison which windows are better KBE or REHAU can be seen.

double glazing

When choosing plastic windows, customers pay great attention to the profile, forgetting about the existence of double-glazed windows. The profile occupies only 20% of the area of ​​the product, and the double-glazed window the remaining 80%. When choosing high-quality windows, you should pay attention to the product as a whole. To understand which plastic windows are better to put in an apartment, it is necessary to take into account the following factors and preferences:

• is it planned permanent residence indoors, or its operation as a warehouse or office;
• whether the density of the frame and its color are a priority;
• family budget opportunities;
• the intensity of the light transmission of the window.

A double-glazed window with a thickness of 32 mm is installed in windows of the "standard" class on 3 glasses, one of which is energy-saving. Windows of the "elite" class have a two-chamber double-glazed window 40 mm thick with one energy-saving glass, plus chambers filled with heat-saving gas - argon. In general, such a window is 15% warmer compared to a "standard" class window.

To improve energy efficiency, silver oxide is applied to one of the glass surfaces during the manufacturing process, which reflects infrared radiation. And ordinary glass passes most of the solar energy, releasing heat rays with it. To improve safety and protective properties window structure, it is recommended to install a double-glazed window made of laminated shatterproof glass covered with protective films of class A1, A2 or A3.

A single-chamber double-glazed window consists of two glasses. The distance between the panes is determined by the size of the distance frame. The frame is based on a desiccant that prevents condensation from settling inside the double-glazed unit chamber. Due to the peculiarities of the Russian climate, it is recommended to install windows with a double-glazed window consisting of three panes. The distance between them is also determined by the distance frame.

The formation of polyvinyl chloride windows into a full-fledged segment has long been completed in the domestic market. Technological and functional frames confidently replaced wooden counterparts, providing the consumer with reliable and ergonomic glazing. However, plastic profiles for PVC windows also cause mixed opinions of users, due to the variety of models and quality parameters this product. Often the manufacturer's brand becomes a decisive selection criterion - certified windows are more likely to be endowed with the qualities and characteristics declared by the company. It remains only to figure out which brand guarantees the best profile properties.

What is a PVC profile?

A metal-plastic profile is a frame that can include up to eight cameras, but models with two or three compartments are more common. Actually, they depend on their parameters in general. It is logical that options for a larger area are weaker in insulating and soundproofing functions than plastic profiles for small windows. In order to increase thermal insulation, manufacturers use polyurethane foam, which fills the space of the chambers. Also common fiberglass coating with In the list of main distinguishing features profiles are also the mounting width. The rigidity of the structure and, consequently, the reliability of the valves depend on these indicators.

Foreign manufacturers of profiles

For the most part, imported PVC windows are represented on the market by German products. Technologies European companies have gone far ahead and today dominate this niche. The list of companies numbers dozens, and the leading positions in terms of quality and sales are occupied by the brands KBE, Rehau, Veka, Trocal, Deceuninck, etc. It is noteworthy that the windows of most German companies are manufactured in Russia under special licenses. Accordingly, many plastic profiles for PVC windows, whose names are of German origin, are produced in our country. Domestic manufacturers of brands such as Rehau and KBE strive to ensure proper quality by completely recreating the original

Russian profile manufacturers

Despite the wide representation of foreign window products, they are improving and Russian technologies manufacturing. One of the oldest domestic manufacturers metal-plastic profiles is Proplex. Having initially mastered Austrian technologies, the company strives to offer a wide range of glazing products.

The formation of the Montblanc brand was not without the help of Austrian specialists. At the moment, plastic profiles for windows with a maximum width of 120 cm are available to the company's customers - this is a system that includes five cameras.

The Novotex company, which has production facilities in the Moscow region, can perhaps be unconditionally called Russian. Engineers and technologists are constantly working to improve plastic structures, focusing on local climatic conditions. It is the latter factor, combined with a low price, that allows the Novotex brand to maintain competition.

Class A profiles

Although the quality of profiles is determined by general criteria, there is a division into classes, according to which it is unjustified to compare premium models and representatives of budget series. The former obviously win in terms of performance and durability, while the price becomes the advantage of the latter.

So, luxury plastic window profiles are positioned on the market as A-class. Such systems are distinguished by wall thickness (3 mm), reliable connections in the corners, as well as protection from external influences. The technical features of A-class profiles are not felt during use, which, however, indicates the reliability of the structures. They are very difficult to dismantle without special tool, indoors is created optimal microclimate, and aesthetic beauty with the possibility of tinting frames does premium systems the best choice. Representatives of the A-class include KBE profiles, Rehau, Veka, etc.

Class B profiles

It is not necessary to count on impeccable technical and physical parameters in the windows of this group, but due to the relatively low cost, this product also deserves attention.

The thickness of the outer walls in B-class constructions is 2.5 mm. For this reason, plastic window profiles PVC grade B is less resistant to physical influences. There is also an opinion about the unsatisfactory environmental performance of the profiles of this group, but this is not true. The absence of toxicity is a general condition for the certification of plastic structures.

Category C profiles

Generally modern profiles C-class fully meet the needs of the consumer both in terms of sound and heat insulation, and in decorative properties. Another thing is that premium competitors have raised the level of technical qualities quite high.

Category C representatives include profiles of such brands as Vektor, LG Hausys, AGF, as well as almost all domestic products, including Novotex. As a rule, they are used in providing non-residential premises, but there are also lines focused on installation in apartments and private houses.

Top Profile Ranking

Against the backdrop of development technological methods production of profiles and fierce competition is not easy to identify. The rating is formed on the basis of a combination of qualities and the introduction of fundamentally new properties. In this regard, the arrangement of leaders can be represented as follows:

This brand has earned the championship thanks to maintaining an unsurpassed level of the main qualities of window profiles. Among them are 50-year durability, increased heat and noise insulation performance, as well as environmental friendliness due to the addition of zinc and calcium compounds to the PVC formulation.

Being a serious competitor to KBE, the Veka brand takes the second place. The list of its advantages includes the manufacturing technology of "light" profiles, which at the same time ensure the preservation of heat and acoustic comfort.

3.Rehau

The Rehau company is rightfully included in the top three. The quality of the profiles of this manufacturer is achieved by adding lead compounds. As a result, the structures acquire high strength and stability in operation.

The following positions can be occupied by many plastic profiles for PVC windows. Which one is better among them should be determined by the same parameters. The Salamander and Deceuninck systems should be added to the top three. Although plastic profiles for windows of these brands are not so popular, their physical and technical qualities maintain a high level. They are also distinguished by ergonomics and thoughtful configuration, which facilitates the installation and further use of window systems.

When old wooden structures are loose, covered with a thick layer of cracked paint, they are not able to retain heat and provide air tightness. Naturally, the question arises: “Which windows are better to put in an apartment?” Plastic! The answer can only be this. However, with the current range of such products on the Russian market, it is quite difficult to make a choice. Therefore, today we will conduct a short review of the manufacturers of such structures to make it easier for you to navigate this variety.

The undisputed leader in the modern Russian market are plastic windows. The advantage of these systems is primarily due to their excellent performance, long service life and spectacular decorative data.

Plastic windows: advantages

If you are interested in the answer to the question: “Which plastic windows are better to put in an apartment?”, You need to know about the merits of these products. Today they are gaining more and more popularity in the construction market. Why did they deserve such recognition?

Of course, the strength of the design. From a normal window strong wind glass may fall out plastic double-glazed window it is securely fastened. In addition, these products are impact resistant.

It is impossible not to take into account the aesthetics of these structures. They are very beautiful, the house with plastic windows seems to glow from the outside, and the rooms become much lighter.

The indisputable advantages of plastic include its lightness and the ability to create a double-glazed window of any shape. For each architectural style you can choose the right option.

Equally important is the affordability of these products. Today, manufacturers from different countries offer not only elite, exclusive types of their products, but also budget options.

plastic profile

The main component of a metal-plastic window is a PVC profile. It is made from polyvinyl chloride. Initially, it is a powdered material produced from products with the addition of table salt. In addition, various modifiers and stabilizers are added to this powder, which give the material strength and resistance to aggressive mechanical and natural influences.

Plastic windows of which company is better to put

Today, many companies are engaged in the production of these structures, both in our country and abroad. Their choice in our time is greater than ever. Moreover, these are not only respected, time-tested brands, but also very young companies that have yet to prove their worth and withstand very tough competition. Today we will try to present them to you so that you can answer the question: “Which company is better to install plastic windows?”

REHAU windows

The German company Rehau has been a confident leader in our market of plastic structures for many years. It was founded in 1948 and today it employs more than 15,000 people. The first representative office in our country appeared in 1995. In 2002, own production was opened in Russia.

The company presents six window profiles. They differ in different different characteristics and prices - from budget to elite. The number of cameras ranges from 3 to 6. There are samples created specifically for the conditions of the Russian winter. If you are thinking about which company's plastic windows are better to choose, the reviews of the happy owners of these designs will help you decide. Customers emphasize that Rehau offers its customers environmentally friendly products.

These windows have become very popular in our country due to affordable prices and high quality. The company's product range is characterized by a huge selection of colors and shapes.

The famous brand produces several types of double-glazed windows from different lines - DESIGN 70, EURO and BASIC DESIGN. EURO are products with increased sound insulation, protection from wind, heat and sun. Profiles are reliably protected from burnout and damage from temperature changes.

The BASIC DESIGN line has lower noise and weather protection. However, the manufacturer guarantees that the windows will last more than 10 years. Pleased with the prices, although it should be noted that they vary depending on design features models: a blind window costs from 2.5 to 3 thousand rubles, a standard one from 8 to 12 thousand rubles.

Windows

If you are interested in which company's plastic windows are better to choose, pay attention to the products of the VEKA brand, well-known in Russia. According to consumer reviews, double-glazed windows of this German company are firmly in second place in popularity.

This company was established in 1969. It introduced nine types of profiles to the Russian market, including unique five-chamber models. The company has two operating enterprises in Russia.

VEKA windows are of the highest quality and quite reasonable prices. The corporation has released several classes of its products, which have their own characteristics - colors, shapes.

A huge selection of shapes - arched, rectangular, trapezoidal and even round - distinguishing feature company products. In addition, there is a variety of styling, a variety of colors.

The most popular windows in our country are VEKA EUROLINE, which are distinguished by insulated profiles, simple shape and affordable price. VEKA SOFTLINE is a classic product with increased wear resistance, effective appearance and soundproofing.

The VEKA ALPHALINE range is distinguished by a large selection of colors and shapes and has the most powerful thermal insulation (three-circuit). The prices for these quality windows range from 3.5 to 5 thousand rubles, depending on the line you choose.

KBE windows

Today, many people who are beginning to be interested in: “Which windows are better to put in an apartment?” Plastic structures of the German company KBE, owned by the Profine concern, are well known in the Russian market. The brand presents five modifications - from the budget line "Engin" to the elite products "Select".

KBE profiles have been manufactured in Germany since 1980. Today they are produced at two Russian factories: in Khabarovsk and Voskresensk. The quality of their double-glazed windows is as high as in Germany.

In the production of the company's products, energy-saving spraying and argon filling of the chambers are used. The cost of such windows is from 6.2 to 8 thousand rubles.

"Samara window structures"

Today, many of our compatriots who cannot decide which plastic windows are better to put in an apartment have the opportunity to support a domestic manufacturer by choosing SOK windows. Since 1999, the company has been part of the German concern Profine. Production is located in the city of Syzran (Samara region). Fittings are manufactured by Aug. Winkhous GmbH. & Co. KG, which celebrated its 160th anniversary last year. It specializes in the manufacture of window and door mechanisms.

KBE profiles are produced not only by traditional white color, but also laminated, which allows you to order models that fully meet the design of your home.

The company presents three types of profiles: SOK 3, SOK 4 and SOK 5. The number means the number of chambers in double-glazed windows. These designs correspond European standards. The cost of a standard window varies from 5 to 7 thousand rubles.

SALAMANDER windows

The German company SALAMANDER is represented on the Russian market by three modifications of window profiles: 2 D, 3 D and Streamline, which has rounded frame and sash shapes. Judging by customer reviews, the company's products are nothing special, except for the traditional German quality, is not highlighted.

By the way, the company produces not only windows, but also balcony pairs, as well as doors. The main advantage of this company is experience and quality. Windows from SALAMANDER are regularly tested and meet international standards.

Prices for all brand products are much higher than those of the closest competitors. This has a significant impact on the demand for this product. In addition, windows from SALAMANDER are produced only in white. Forms standard - rectangular. Prices are quite high and depend on the class of selected products. A blind window will cost you from 3 thousand rubles, a standard rectangular opening window - from 6 thousand rubles. Models of the elite line can be purchased for 15,000 rubles (initial price).

Deceuninck windows

Designers often help their clients in solving the question "how to choose reliable plastic windows for an apartment." Recently, they are increasingly recommending paying attention to the products of the Deceuninck concern. This is one of the pioneers in the production of PVC systems in the world. In addition, the brand became one of the founders of the Union of Manufacturers of Plastic Profiles of Russia. The concern owns Thyssen Polymer. It has been producing PVC windows since 1965, the company appeared on our market in 1997. A few years ago, production was organized in Russia. Today, Deceuninck windows are a worthy competitor to such as Veka, Rehau, KBE

The first samples presented Russian buyer, became Zendow, AD, Favorit, Bautec, Forward, which met all the requirements of their time and at the same time had quite affordable prices. However, time passed, requirements grew, materials and technologies improved. Only the last three models from the mentioned list remain today (although Favorit and Bautec are also outdated today). However, they were replaced by two models that are much better adapted to the harsh Russian climate: Favorit Space and the elite Eforte. The cost of brand products is from 4 to 15 thousand rubles.

Schuco company

Not all consumers know which windows are better to put in an apartment. Some believe that the more expensive the product, the better it is, others are sure that the most important thing is the material, others think that the main thing is the level of sound insulation. In fact, high-quality PVC windows should have all these characteristics.

As for Schuco windows, even very popular brands cannot always compete with them in terms of quality. The fact is that all production is concentrated in Germany. In this regard, the brand's products are of the highest quality.

The company supplies three types of profiles to the Russian market: three- and five-chamber double-glazed windows. In addition, the company also produces seven-chamber models. All products in Russia are considered elite. The price varies from 6.8 to 18 thousand rubles.

Montblanc

Often people do not consider the products of domestic manufacturers when they think about which windows are better to put in an apartment. Photos in special editions most often advertise goods of famous world brands. Nevertheless, we advise you to pay attention to the Russian company Montblanc.

Production is based on German equipment, but the factories are located in Russia - in Elektrostal and Khabarovsk. Their products have been on the market since 2001.

The company presents six modifications of profiles: two five-chamber and one six-chamber. This product belongs to the economy class. Price - from 3.5 to 6.2 thousand rubles.

WDS windows

When we decide which plastic windows are better to put in an apartment, we often price factor is decisive. It is thanks to him that the products of the famous WDS window profile very quickly gained good distribution in our market.

The company relies on a buyer with an average level of income. WDS windows have two main characteristics - affordable price and good quality. Models do not differ in exquisite forms and diverse color solutions, they do not have excess functionality. Traditional rectangular double-glazed windows are produced deaf or opening, medium and heavily insulated. Therefore, the prices are reasonable: an opening window costs from 4.5 thousand rubles, and a deaf one - from 2 thousand rubles.

Which brand of plastic windows is better? Customer Reviews

We have presented to you the main manufacturers of these products, which today divide the Russian market. However, we are sure that the information received does not yet allow you to decide which plastic windows are better to put in the apartment. That is why we want to turn to the reviews of the owners of profiles of various companies. This will allow you to make the final choice.

About REHAU windows we could not find negative reviews. People assure that these products are really of high quality, the contractual terms are observed, the technical characteristics are fully consistent with those declared by the manufacturer. There are some complaints about the high price, but, as you know, a quality thing is not cheap.

Veka company fascinates its customers not only with excellent quality, but also with well-organized work of the staff - managers, measurers, installers.

There are mixed reviews about KBE windows. At not the lowest prices, some buyers are satisfied with the purchase, but there are also many who complain that the windows are leaking and moldy. Therefore, people recommend purchasing Standard and Standard windows, as well as choosing high-quality fittings.

With the products of Samara window structures» there may be problems with contractual terms. Unfortunately, they are not always observed. Many complaints about the work of installers.

The quality of SALAMANDER windows does not cause any complaints. However, many are not satisfied with the rather high price.

Deceuninck's designs, as it turns out, aren't all that great. Many complain about poor sound insulation, black blotches appear on the profile. A lot of angry words addressed to the company's management about poor-quality installation.

But the majority of buyers are satisfied with Schuco windows. The products are of high quality, and besides, there is such a service as five years of free maintenance.

The same can be said about the products of the domestic company Montblanc. At affordable price the quality is excellent. Customers also note the professionalism of the staff.

WDS windows fully meet the declared characteristics, while pleasing reasonable price. Only upsets small selection colors and patterns.