How to choose a quality chipboard countertop for the kitchen at a reasonable price. Dimensions of kitchen worktops made of chipboard, solid wood, artificial and natural stone. what you need to know before buying

Kitchen dimensions working surface must be determined at the design stage. This will help to draw up a competent drawing, as well as accurately calculate how much material will be involved in the manufacture of the headset in the kitchen.

How does material affect dimensions?

The first thing that determines the size of the countertop in the kitchen is the material used. Each of possible types has its standard dimensions, on the basis of which the minimum or maximum dimensions countertops. The most common options are:

The standard size of a solid wood kitchen worktop sheet is 40 mm thick, 100 to 600 mm wide, and 100 to 3000 mm long. Although today some manufacturers can make wooden surface any length and non-standard depth and thickness, the cost of such options is calculated individually. In Ikea, popular solid wood countertops are sold in two versions: 1260x606 mm and 2460x606 mm.

. They can be performed without joints - even in the corner work surface, the seams are filled with glue and then sanded, as a result of which they become completely invisible. In addition, this material is practically not subject to scratching. At the same time, artificial stone does not lend itself well manual processing And yes, it's not cheap. You can order a product of any dimensions from the manufacturer, but standard width countertops in this case will be 600 mm, length - 2.4 m.

Natural stone also has standard surface dimensions - width no more than 600 mm, length - 750, 800 or 2400 mm.

You will have to order the manufacture of countertops if you plan to install stone slabs on a corner or U-shaped set. In addition, for the installation of such a work surface, professionals will be required, since it is heavy and difficult to handle.

How to choose the right dimensions

Standard sizes kitchens were formed on the basis of typical layouts rooms with certain dimensions. However, today literally all values \u200b\u200bcan vary - this is the height of the countertop from the floor, and its length, and depth. These options are selected depending on the following factors:

Also see our other articles:

Properties of the selected material and features of its fastening;
The capacity you need kitchen space- length, depth, height of the countertop;
Ergonomics and ease of use;
Aesthetics - the size of the surface and its height from the floor must correspond general parameters kitchens.

The physiological parameters of households, those who will actively use the kitchen, are especially important. So, the height of the location from the floor directly depends on the height of people.

When choosing the dimensions of the countertop in the kitchen, the functional organization of the space is also taken into account - for example, for big family a longer and wider (and therefore more capacious) option is suitable.

It is clear that standardized kitchen sets in general and countertops in particular will be cheaper than those made to order. Therefore, carefully draw up a project even before buying - it is possible that among the ready-made options you can choose a good solution.

The design of the kitchen must be approached with all responsibility, since the design of the kitchen set, as a rule, remains unchanged. long years. Therefore, it is so important to take into account the factors that affect the arrangement of furniture in the kitchen, as well as the materials from which it will be made. An important point is the dimensions of the future countertop, since the depth of the lower and upper tiers of the cabinets, the height of the shelves, etc. will depend on this.

A kitchen worktop is a surface that is installed on top of lower tier cabinets in the kitchen.

When choosing which countertop to purchase, you need to know that:

depth (width) is the distance from the wall to the edge of the furniture;
the thickness is indicated, as a rule, taking into account the waterproof coating;
length - here the dimensions of the working surface of the countertop are indicated without taking into account the sink and hob;
a seam is a joint between parts of a countertop; seamless patterns have a solid coating.

What determines the size of the kitchen countertop:

the material from which it is made;
kitchen dimensions;
the principle of location of the headset (corner, front);
customer's desire.

Standard kitchen worktop sizes

The standard sizes of kitchen furniture were invented because a large number of standard housing with the same dimensions were built in the Soviet Union.

Accordingly, the countertop also had standard dimensions (here they are indicated in mm), since it was made mainly from chipboard:

width (depth) - 600;
thickness - 38;
length - 1000.

The length varied, based on the given parameters of the kitchen. Taking into account the dimensions of the sink and stove, the length of the headset itself was approximately 2500 mm. It is also worth noting that in Soviet time the frontal location of the headset was used mainly.

Today, each furniture showroom has its own line of standards, but now the sizes differ due to what material is used to make the kitchen.

But there is always an option individual option countertops for the kitchen according to the size of the room.

Everything here will depend on overall design cuisine, from a flight of fancy and available budget. In an IKEA showroom, for example, the standard worktop thickness is at least 38 mm.

Standards for different materials

So, the standard dimensions of the countertop for the kitchen, taking into account the use different materials, are (values are in millimeters):

Standard length chipboard sheet with laminated coating (LDSP) is 3500, depth - 600. This is still the most common material for kitchen worktops: it has an acceptable cost and makes it possible to easily change the size of a chipboard kitchen worktop. But keep in mind that cutting off the length or width is quite easy, but building up is possible only with the help of seams. At IKEA, the depth of the laminate worktop is 635. With the frontal arrangement of furniture made of chipboard, you can get by with a single sheet of material, while with corner placement of seams and joints you cannot avoid.
Another one from budget options– tabletop made of DPS, made using the postforming method. In this case, the surface is covered with plastic. The disadvantage of this coating is the instability to mechanical damage, it is easily scratched and deformed. The thickness of such a countertop will be 28 or 38, the length, respectively, will be 3050 or 4100. The standard width is 600.
MDF is also a common material for making not only countertops, but also kitchen cabinets. The advantage of this material is low toxicity, since lignin and paraffin are used to bind the fibers, low cost and ease of processing. Dimensions of MDF countertops: thickness - from 28 to 38, depth - 600, length - from 1000. In IKEA salons, such countertops are presented in two types - with a matte and glossy finish. For life and work, matte is preferable, as cuts, chips and scratches will immediately become visible on a glossy surface.
Dimensions of solid wood countertops: thickness - 40, width - from 600 to 1000, length - from 1000 to 3000. For example, the standard dimensions of IKEA kitchen countertops made of wood are 1260x606 and 2460x606.
From artificial stone You can order a countertop of any type and size. Seams in such products are filled special glue, processed and polished, as a result of which they become completely invisible. In addition, such a surface is highly resistant to mechanical damage. The disadvantages include only the high cost and complexity of processing. Standard sizes of countertops made of artificial stone: depth - 600, length - 2400.
kitchen countertop dimensions natural stone: length from 750 to 2400, width - 600. When installing such a countertop, it is necessary to involve professionals, since the stone is difficult to process. With corner or U-shaped placement of furniture, the designer's advice will be required, such models are made only to order.

Custom countertops

When planning custom furniture to order for the kitchen, first of all, rely on what material will be used, consider its quality and durability, study the properties before purchasing. To do this, you can look at IKEA offers - usually there are enough detailed description materials and a wide range of kitchen furniture models.

It is desirable that the countertop be made of the same material as kitchen cabinets. Of course, this does not apply to stone surfaces. Just when ordering stone countertop make sure the cabinets and kitchen shelves will not look flimsy against the background of massive stone surfaces.

When planning corner kitchen remember that seams and joints will be invisible during installation stone surface countertops. In all other cases, only the most dense joints can be achieved.

Seams and joints at the wall or at the apron in the kitchen can be masked with a special plinth. It would be better if it is made of the same material as the countertop. In addition to the decorative function, such a plinth also carries a functional load - it will prevent the surface from detaching from the wall, and also will not allow liquids to seep through back wall lockers. Accordingly, the length of the plinth must be taken into account based on the total length of the work surfaces.

The financial component is an important factor when choosing a kitchen countertop, but it is better to spend a large amount on a quality purchase once than to change cheap short-lived products many times.

Not a single option for arranging a kitchen can be imagined without a countertop. Today, these designs are presented in a variety of variations. Users are offered a choice of countertops made of stone, chipboard, plywood, granite and many other materials. Thanks to high quality and excellent characteristics, these constituent elements of the kitchen set have served for decades. Choosing suitable design it is important to know what should be its optimal thickness.

We choose wisely

Thinking about how thick the countertop for kitchen fit the best way, each owner should know that the optimal figure is 40 mm. However, on the market you can find products of other thicknesses:

60 mm
80 mm
100 mm.

These designs are ideal for building a kitchen island or equipping a bathroom. Thickened countertops are usually made to order, taking into account the width and length of the structure.

In order for kitchen worktops with a thickness of 60 mm to ideally fit the kitchen set, it is important to take into account the features of the set. The standard length does not exceed 3 meters, but the width depends on free space in kitchen area. In any case, the main criterion is user convenience. The width, length and thickness of the countertops for the kitchen made of chipboard in the photo should be convenient for the hostess.

Material Features

Defining optimal thickness work surface in the kitchen, let's not forget that each material has individual parameters. So, this indicator of countertops for a kitchen made of artificial stone cannot be more than 12 mm. This is a feature of the material that does not allow you to make the thickness more. Furthermore, artificial material is different high strength, which makes it possible to produce working surfaces with a height of only 3 mm.

Manufacturers in the process of creating artificial stone countertops in the photo use the seamless casting technique. Thanks to this, the surface is monolithic, as strong and durable as possible.

With a small sheet thickness, it is recommended to additionally use chipboard, which is attached to the bottom of the structure. However, in most cases, artificial stone countertops are mounted directly on kitchen set without auxiliary sheets of chipboard.

If the tabletop is made of laminated MDF material, then their standard thickness ranges from 28 mm to 38 mm. However, despite the sufficient height of the plate, such structures have a significant drawback - sensitivity to moisture. If the 28 mm MDF kitchen countertops are not constantly wiped dry, the surface will swell very soon, turning into an unusable structure.

Popular Options

Given that the price of work surfaces made of different materials fluctuates, not all variations are available to every consumer. The most popular are chipboard and plywood countertops. The optimal dimensions in thickness are 28 mm. However, foreign manufacturers recommend using countertops with a height of at least 38 mm.

Close attention deserves models of countertops made of of stainless steel. Such designs are different:

Durability.
Excellent performance.
Demanding and whimsical care.

The optimal thickness of the working surface made of stainless material is 38 mm. These are products of a rectangular shape, often finished with a mirror, polished surface.

Beautiful by outward signs, but very impractical, are wood countertops. Standard thickness wooden tabletop equal to 40 mm. But there are also more durable options, the thickness of which reaches 50-60 mm. This type designs are made from:

beech,
walnut,
alder,
cherries.

However, despite the visual appeal, wooden countertops do not withstand the effects of temperature and humidity.

At the end

When choosing a quality countertop for the kitchen, you need to pay attention to a number of parameters. An important indicator is the strength and durability of the structure. When choosing, be sure to take into account the length, width and thickness of the surface.

The optimal indicator of an artificial stone countertop is a height of 28 mm, from chipboard - 28 mm, from wood - 40 mm.

Countertops for the kitchen are a functional element that is installed on top of the lower cabinets of the kitchen set.

What you need to know about countertops

The most common cause, along which the countertops are changed - deformation due to poor waterproofing. Liquid silicone sealant can be used to protect against water.

Countertops serve:

Working panel for cooking, it is on this plane that cutting board and products;
A place for drying dishes if the dryer is not removed inside upper cabinet above the sink;
A decorative element, the choice of countertops is just as important as the choice of an apron for the kitchen.

To correctly select the size of the countertop, you need to consider:

The width of the cabinets on which it will be installed;
Technical characteristics of the material.

According to the principle location of the tabletops are:

Frontal, the plane goes in one direction;
Angular, the plane changes direction.

There are countertops for the kitchen that are already included in the set, and there are those that are created to order.

If desired, you can replace ready-made version on the author's, especially if the quality of the material is not satisfactory.

New countertops installed:

With the dismantling of the old;
over the old ones.

An important nuance is the sealing of all joints of the countertop with an apron or wall. Water entering the joints between the panels causes swelling and decay of all materials except stone and plastic.

Choosing a countertop for the kitchen (video)

Standard sizes of countertops for the kitchen: the choice of materials

For small kitchen needed narrow options countertops, and for a spacious one - any will do.

What you need to know about countertop dimensions:

Depth is the distance from the outer edge to the wall;
A seam is a joint between two or more parts of the panel, that is, seamless are solid options, and with seams are prefabricated models;
Depth and length also depend on the material, each group of materials has its own standards.

If the budget for repairs is limited by common sense, natural stone should be abandoned. This material is not practical, expensive, although certainly beautiful.

Popular and available options countertops, their dimensions and characteristics:

Chipboard with laminated finish. The length of the sheet is 350 cm, the depth of the sheet is 60.0 cm. There are options with a length of 410 cm and 305 cm, you can also combine cuts with each other, change the direction to the corner. If necessary, you can cut with a jigsaw to any depth or length. The coating serves to decorate and protect the chipboard, usually there is a raw edge, it is from this side that you need to trim so as not to damage the bend of the coating. There are trim strips on sale, special protectors for countertops that isolate the side cut and protect the material from destruction. The thickness ranges from 2.8 cm to 3.8 cm.
Wood. The second most popular material, standard sizes: length from 1 to 3 meters, thickness is usually 4.0 cm, but there are options with a thickness of up to 6 cm. The most popular sizes of wooden countertops: 1.26 meters long, 60.6 cm wide , and the second - 2.46 m long, 60.6 cm wide. This calculation is due to the dimensions of Russian kitchens.
Fake diamond. Best seamless material, you can even create seamless corner tabletops by sanding the joint. Standard dimensions are 60 cm deep and 2.4 m long.

If you need to increase the depth of the countertop, you should select a non-standard canvas, for example, 70 or 80 cm.

Such countertops are not usually included in the set, but are ordered individually.

Kitchen worktop 4 meters: what to do

A small kitchen is a cause for suffering huge amount Russians. small space severely limits the choice of furniture and in general creativity during repairs. Any wide kitchen set with deep cabinets with such a kitchen area will simply take up 2/3 of the room, and the remaining third will go under the dining table.

What can be done to save the day:

Revise the concept of the kitchen;
Do not buy wide headsets, it is better not to buy headsets at all, but to make according to an individual project;
Use the area of the walls, make hanging shelves open type either with light glass doors, remove everything that is possible there;
Make the lower cabinets under the countertop no wider than 30-40 cm;
Choose a narrow and long sink, place it along the wall, and not at a right angle;
Occupy all niches with built-in wardrobes, preferably hanging ones;
Attaching a table without legs directly to the wall will increase usable area kitchens;
Purchase a standard countertop and cut it with a jigsaw to the desired depth.

The jigsaw is sold in hardware store. It needs canvases - cutting plates. They have varieties in material, if the countertop is made of chipboard, you need a canvas for wood.

How to cut:

Tightly fix the tabletop on the table or workbench with clamps, if there are no clamps, press down with the weight of an assistant;
Make markings in advance, cut at high speeds so that there are no chips;
If you can’t use the jigsaw on your own, give up and order a saw cut at a hardware store.

Sawing and fitting to dimensions for a fee can be ordered along with delivery in every construction hypermarket.

Narrow countertops for the kitchen: how to combine with a stove

Usually the countertop line runs between the sink and the stove. There are a lot of models of narrow, but long shells. The small width of the shell is compensated by its depth and length. A narrow stove for 2 burners can also be found on sale, but a more interesting option is where 4 burners are arranged in a row.

This is a rare model, but it exists. In everyday life, narrow sinks and stoves are not convenient, there is a lot of splashing, the walls and kitchen apron quickly get dirty.

But a cluttered kitchen is even more inconvenient, so you need to choose between two evils that you can afford.

Corner worktop for the kitchen: dimensions and fit

The joint of two panels to change the direction of the countertop must be carried out at an angle of 45 degrees. Then waterproofing is necessarily carried out at all joints, with a sink, with a stove, with a kitchen apron and between two panels of the countertop. Some materials can be sanded, but laminated chipboard cannot.

If there is no jigsaw skill, then you need to measure in advance required dimensions and report them to the sawmill. What to do, if corner table changes not only the direction, but also the width of the panel? This situation is very convenient in a small kitchen with a niche. A narrow panel runs along the wall, includes a sink and stove, while a wider panel is built into a niche. You can build a stove into a niche, but then you need to cover the walls with a finish that does not absorb fat.

As a result of joining the narrow and wide panels at an angle of 45 degrees, the side cut of the wide part remains open.

It is here that you need to apply a trimming bar, which will beautifully mask and protect the cut. If you want more easy solution, then you can arrange small kitchen not modern but traditional way. In this case, any corner kitchen set, even Soviet times, with an already built-in corner worktop, will do.

Rating

Tabletop selection - purely individual process. Each client chooses different thickness, width, height, focusing on your preferences and the size of the kitchen, bathroom, area of \u200b\u200bthe apartment or room.

As a rule, the thickness of the table top is 40 mm. But there are countertops, the thickness of which is 60,80,100 mm. Very thick countertops are used to visually emphasize the working parts of the countertops, for example, the location of the sink in the bathroom, or to kitchen islands. But the most popular countertops (chipboard), which are covered with plastic 28 or 38 mm thick.

On average, the maximum load on the countertop in the kitchen is 23 kg, in the bathroom -25 kg. It is not recommended to put heavy and very bulky items on the countertops, even if it is made of durable and resistant materials, regardless of whether they are natural or artificial.

Kitchens come in a variety of sizes. Yes, and the layout of the room plays big role. However, the requirements for kitchen countertops are the same: they must be easy to clean, smooth, safe, stylish and harmonious with the interior, have good mechanical resistance to impacts.

The length, as well as the shape of the tabletop, are determined by the length of the headset and its location. The depth of the worktops is from 600 to 1200 mm, and the thickness is from 28 to 100 mm. The most requested material for kitchen worktops- postforming. Such countertops are easy to maintain and very reliable. For the manufacture of these countertops, high-quality and thin plastic with high pressure is used.

As for laminated countertops, there are standards for the thickness of the countertops - there are only two of them - 28 and 38 mm. However, laminated countertops for the bathroom and kitchen have a disadvantage, which is that their material is not resistant to moisture, this can lead to swelling, which means damage to the countertop.

The choice of modern countertops is very large and the standards for their manufacture, as well as the parameters are different. But the modern countertop for the kitchen is a 3-4 cm slab, which is located on the cabinets. It is preferable to make the width of such 60-64 cm, it is more convenient and easier to use.

Countertops are made from cheap and expensive materials. Among the list are chipboard, plywood, stainless steel, wood, stone. Chipboard, laminate top thickness ( Russian production) is 28 cm, from European countries - 38 mm. Both options are suitable for kitchen countertops and bathroom countertops.

Stainless steel countertops deserve special attention - they are manufactured in rectangular shape. The thickness of these countertops is 38 mm. The length of the stainless steel countertop is 3.7 m. Manufacturers also offer mirror stainless steel countertops. Their parameters and thickness are similar to those made of stainless steel, only the material is more whimsical to maintain and cost a little more.

Another material for the manufacture of countertops is natural wood. The edges of wooden tabletops lend themselves to milling, oil processing technology, which affects its good quality.

Wooden countertops are offered by manufacturers of Russian and European firms. Wooden countertops made of beech, alder, walnut, cherry, the thickness of which is 32-42 mm, are among the most popular among buyers. Oak countertops are the most expensive and take 2-3 weeks to make. The production time for wooden table tops from other types of wood is extremely short - 2-3 days. Of course, wood countertops are capricious in their care, they should not be placed on hot objects and subjected to intense mechanical stress. But they are the safest for human health.

Acrylic countertops. acrylic stone has a non-porous structure, does not absorb moisture, chemical reagents, is not afraid of fungus, mechanical damage (shocks), bacteria, withstands high temperature up to 180°C), easy to polish.

Domestic manufacturers make countertops from an acrylic stone sheet, the thickness of which is only 12 mm. Accordingly, the countertop will not have a large thickness, which means that the price will be cheaper.

Countertops made of natural and artificial stone are a masterpiece in your home. There is no more reliable and stable material. Tabletop thickness - 40 mm or more.

It's no secret that many people buy and order for the manufacture of countertops for the most necessary rooms in the house - kitchen and bathroom. It is there that the countertops are most needed. Especially the kitchen, where the countertop is the main working area of the hostess, which means that it must be reliable and dense. Thickness - the more, the better and calmer. Bathroom countertops are best made of composite, moisture-resistant stone. Durability also matters. The ideal thickness of those is from 28 mm. The countertop in the bathroom does not carry such a load and mechanical impact like a kitchen countertop.

Categories

Popular