Summer brings not only positive emotions and relaxation, because you should not forget about annoying flies and dangerous mosquitoes that strive to fly into the open window. mosquito net it is inexpensive, but if you calculate that there are several windows in the house, then in the end you get quite a decent amount, which, if desired, can be saved. Do-it-yourself mosquito net is done quickly and will be inexpensive.

Which is better - a purchased mesh or made by yourself?

Buying a window mesh will cost you about 1500-2000 rubles, so for the sake of savings, you can make it yourself. Many people ask the question - how to make a mosquito net on a window? It is not difficult, especially since everything you need can be bought at a hardware store. If you are interested in the question of what mosquito nets are made of, then the answer is simple - the material is durable fiberglass with the addition of weatherproof PVC. The higher the quality of the material, the higher the protection against insects.

Before you make a mosquito net with your own hands, take careful measurements, do not forget about allowances. If you are going to attach the mesh with Velcro or glue, choose something that can be easily removed without damaging the window.

A few simple ways to make a mosquito net with your own hands

There are two types of mosquito nets that you can make yourself:

1. Fastened with fastening tape - an easy and cheap way to make a mosquito net with your own hands.
2. Framework.
3. Roll.

One of the easiest ways to make a mosquito net with your own hands is with the help of special material and adhesive tape.

Take high-quality Velcro, the quality of attaching the protective mesh to the window opening will depend on this. You will also need special material with small cells. The smaller the cells, the better. Such material can be purchased at fabric stores, or you can use old products, for example, unnecessary tulle. It is best to purchase a special mosquito net - it reliably protects against insects and withstands atmospheric influences.

Mosquito net fixed with adhesive tape

After all measurements are taken, take the material and cut it, do not forget to leave small allowances. Velcro divide into two equal parts. Apply glue to one part and carefully glue it to the window opening. After the glue has dried, attach the mosquito net to the adhesive tape. Similar grids can be made for a car. Done quickly and easily with minimal cost. Instead of sticky tape, special magnets can be used, this will significantly reduce the installation time of the grid and simplify the process.

Frame window grids

A more costly and complex method of manufacturing a mosquito net is a frame-mounted method. To do this, you will need metal corners, plastic cable and rivets.

The first thing to do is to measure the window from the outside, because that is where the mosquito net will be attached. On the cable, cut the desired length, adhering to the angle of 45 degrees. Sand the slices and connect with metal corners. Now make holes in the corners in which the rivets will be located. They should be outside, not inside the cord. Now it remains to fix the mosquito net itself on the frame. Do not pull the mosquito net too tightly, as this can deform or tear the canvas.

Frame window grids

You can make sliding mosquito nets with your own hands, they will fit well and protect the balcony opening or front door. A mosquito net on the balcony will help you prevent the penetration of dangerous insects into the room, it will reliably protect even from street dust. The manufacturing technology is the same, the only difference is that the material is cut in the middle, the edges are processed. For convenience, you can attach magnets or rivets to the edges of the mesh, so you provide additional protection.

Roll mosquito net

Rolled mesh window operates on the principle of roller shutters. It will reliably protect against insects, and it is convenient and easy to use. If you are interested in how to assemble a rolled mosquito net with your own hands, then there is nothing complicated here. You just need to be patient and have the right materials.

With your own hands, you can make a mosquito net for a window of any size. To make a rolled protective mesh, you only need a special box with a shaft and material. To attach the mesh to the window, use special magnetic latches. You can apply fastening with screws with an overlap or at the end of the guide in the opening to the slope. It is more convenient to use a rolled mesh than a regular one, and it is much easier to care for it.

Roll mosquito net

Rolled mosquito net on the window is an excellent protection against annoying insects. Allergy sufferers will especially appreciate this design - after all, it will protect the room not only from mosquitoes, but also from plant pollen and poplar fluff. The material for such a mesh is best to choose fine-grained, this will increase the level of protection.

Making a mosquito net with your own hands is not difficult. If you need a mosquito net for a balcony or window, you can make it yourself quickly and without extra costs. Give this process a few hours and enjoy a quiet life without annoying insects! A handmade mosquito net is quite inexpensive. After the summer, it can be removed from the window and carefully packed, and in next year re-hang on the window.

Homemade and most cheap option production of a mosquito net without the use of a frame. This option is a mesh fastening directly to the plastic window profile.

The easiest is to make your own mosquito net from insects using the appropriate fine mesh material and adhesive tape for fastening. Such a product will provide protection for the premises for several seasons.

You will need the following components, which can be purchased at retail:

• mosquito net with 1.2 mm cells;
• adhesive tape - one side of it should contain a pile, and on the other there should be many small hooks;
• glue for gluing cork or mosaic.

Surface preparation

Mosquito net for plastic windows should be installed on a clean, prepared surface. The space is prepared by clearing open windows from dirt and degreasing them inner surface. To do this, you can use a soapy sponge, after wiping with clean gauze.

Considering that the installation is carried out on plastic windows be sure to use only soapy water for cleaning and never use solvents or alcohols.

Tape laying

After cleaning the surface, separate sticky tape. Select the part with the hooks and glue it to the perimeter of the window opening with glue applied to the back. Pay attention to the fact that the tape does not interfere with the closing of the window. It is very important that it does not create difficulties in the joint area between the base of the window and the side where it closes.

The tape can be glued more easily if you do the opposite, apply glue around the entire perimeter of the desired area, and then, without making extra measurements, cut the tape to the required length and width.

Markup and installation

Leave the tape for a while to dry, and start marking the mosquito net. Having measured the perimeter of the opening, and apply its contour to the canvas. When cutting, leave a margin that will be equal to the width. You need to bend the overlap around the perimeter, and then sew the second part of the tape, and with the pile out. Sew along the edge, if necessary, you can make additional stitches in the middle. After the tape with hooks is glued to the frame, wait about three hours. Then attach a mesh with a fleecy tape to it. Now you know that it is not so difficult to make this design with your own hands.

Installation of a mosquito net on a frame

Of course, the next option is not the cheapest. However, costs can be minimized if installation on plastic windows is carried out independently.

Materials. You need to purchase: metal corners, the width of which is about 1 cm, a plastic cable channel measuring 15x10 mm, glue, about sixteen rivets, the canvas itself of the desired size.

Frame manufacturing

Since this kind of product is installed outside the window, when taking your measurements, focus on this side of the window. After the necessary data has been received, you can begin to manufacture the future frame: mark your data on the cable and cut the required length at forty-five degrees with a saw cut or a knife.

The places where the cut was made, sand with a special whetstone. Compare the finished polished components of the future frame, connect with metal corners. While holding them, make holes for the rivet in the finished cable channel, taking into account the holes in the metal corners.

Insert rivets into the holes obtained. It is important that the riveter is on the outside of your cable, not inside. If you don't have a riveter, you can use screws and nuts.

After tightening the screws, be sure to cover the nut oil paint to avoid screwing the nut during vibration.

Attaching the canvas to the frame

Having completed the frame, proceed to attaching your mosquito net to it. It is better to use a thin mesh to avoid the difficulty of pinching it in the cable. Lay it on top of the frame so that the edges protrude 2-3 cm beyond the perimeter of the frame, and snap the mesh with the cable channel cover, alternating snapping the short and long sides. Be careful before you fasten the long side.

Be sure to pull it up a little towards the corner to eliminate sagging - but don't pull it too hard, as this can tear the protective sheet. After you finish installing it on the frame, you can trim off any unnecessary sticking out excess. In some locations, apply adhesive between the cable and the cover to prevent spontaneous opening of the cover.

How to install ready-made in a window opening

From a sheet of metal, cut two strips of 20-30 and 20x40 mm, bending them into a Z shape. Try to make the bend wrap around the channel. Choose a shorter side where you drill a hole intended for a self-tapping screw. Ready-made fasteners are installed on the street side of the window, retreating about a centimeter from the window opening.

Fasteners are installed using a self-tapping screw, with long fasteners placed at the top, and short ones at the bottom. The distance between the lower and upper fasteners must exceed the length of the frame by 1 cm. Start the installation with the upper fasteners and end with the lower ones.

Mosquito (more precisely, anti-mosquito) net on the window in the summer is an absolutely irreplaceable thing. Strong and light, almost imperceptible, such a mesh blocks the path of street dust, insects and poplar fluff, but it perfectly transmits natural light and air. It is not always possible to order it. But you can create this accessory with your own hands at home, and also decently saving. This will only take 2-3 hours (if we are talking about one window), even if you have never had to do anything like this before. You just need to know some nuances, how and from what it is better to make such a grid, which window is suitable for, etc. Let's try to figure it all out.

• swing;
• sliding;
• pleated (gathering "accordion");
• and rolled grids.

Pleated nets and roller blinds are the most compact and do not require removal for the winter.

Any of the above designs in industrial design is quite expensive, besides it is technically complicated. Loops are needed, special constipation and mechanisms will be required. You won’t even be able to mount them yourself; this requires skills, experience and a special tool.

It is easier and cheaper to make a mosquito net yourself. But it will be a fixed frame or frameless option, which, of course, will not open / close, but it is guaranteed not to let a single mosquito into the room, delay the penetration of fluff, dust and dirt.

The frame mesh can be external or internal, as well as plug-in. In a frameless version, such a design can only be internal.

What mesh to choose for making your own hands?

When choosing which mosquito net to make for your window, you should focus on the following points:

• the material from which the window itself is made (is it wood or plastic);
• type of wings, if the design is plastic (they are hinged, tilted or combined);
• type of housing (private is a house or apartment in a high-rise building);
• the number of storeys of the building, if we are talking about an apartment;
• window opening mode (frequency);
• the presence of pets.

Based on the given conditions, the following are already selected:

• cloth material;
• mesh design (it will be frame or frameless);
• frame design and material for it (if this option is selected);
• fastening method.

Important: On plastic windows with tilting sashes, only the outer frame mesh can be installed. Unless, of course, for the summer, the sashes from such windows are not removed at all.

cloth

The main thing for a home-made mosquito net is to choose the right panel. The maximum possible size of its mesh is 3.7 x 3.7 mm. If the cells are larger, insects (in particular, mosquitoes) will easily overcome this barrier. As for the minimum dimensions, they can be limited only by the conditions of air and light permeability for residential premises. On the balcony, for example, subject to the ventilation mode, grids with a mesh of 2 x 2 mm will work perfectly.

Where you have to escape exclusively from mosquitoes (say, in middle lane Russia), a mosquito net with a mesh size of 3 x 3 mm will be a reliable protection. And in Siberia, where in the cities and villages people are pestered by midges, smaller barriers will be required - mosquitoes 2 x 2 mm and smaller. If we talk about specifically anti-dust "defense" of the home, then only a grid with a cell of 1 x 1 mm can help here.

Note!Some "in the old fashioned way" choose to create a mosquito net on a window with fiberglass (otherwise called fiberglass) with a PVC coating, but this is not the most The best decision because the material, although durable, exhibits very low light and breathability. In addition, its thick threads are destroyed quite quickly under the influence of ultraviolet light, coupled with dust. As a result, the mosquito net turns into a dust collector, which itself “dusts” with the smallest fiberglass needles. In fact, such a grid is subject to seasonal replacement, which is completely unprofitable.

It is better to choose a more modern, reliable and environmentally friendly polyester fiber to create a mosquito with your own hands. It comes with a cell various shapes and sizes - you can choose the right one for each specific case. So, for example, a material with rectangular cells is durable and cheap, perfectly repels street dust without accumulating it. Air and light, however, such a mesh does not transmit very well, so manufacturers offer a similar material, but with a hexagonal mesh (1.5 mm in diameter), which also resists air and light flows, like a braided fiber with a mesh size of 2.7 x 2.7 mm. That is, with this option in the house there will be much more light and air, with high-quality protection of the premises from dust and insects.

And yet, for self-manufacturing of mosquito nets for windows, consumers most often purchase polyester fiber with rectangular cells, choosing from the following options:

What color to choose for mosquito netting?

This is not only a matter of taste, but also of visual comfort. Diffraction distortions of the light flux should be taken into account. So, if a white mosquito net is installed on the window, the picture outside the window blurs, loses clarity and contrast. But from the street, through such a grid, everything that happens indoors is perfectly visible.

That is why, for the independent manufacture of mosquitoes, experts recommend choosing a cellular fabric of dark shades: black, gray, brown. Then the visibility from the inside will improve significantly, and from the outside it will worsen.

Framed or not?

Do-it-yourself frameless anti-mosquito canvases do not hold very well on windows. They are also limited in use due to the impossibility of their frequent removal.

Most a budget option such a mesh (it will cost about 100 rubles) is when a tailored panel is put in place of a regular window seal (which is previously removed), where it is fixed with a regular linen cord. True, in this case, one may encounter a situation of “sticking” over time of the sealant to the grooves in PVC windows. But even if the window structures are new, after a season or two, there is a chance of encountering the problem of non-sealing of windows, which means leaks and blowing. And then the repair will cost an amount that is many times more than what was saved on the mosquito net, undertaking to create it with your own frameless hands. That is why it is better to make a frame mosquito for residential premises.

Fastening

It is not enough just to take measurements and cut the mesh, you need to think about its installation and fastening. So, for example, a frame mosquito can be attached to a plastic window in 3 ways:

1. Using plungers - spring-loaded rods with heads. To do this is simple: you must first remove the heads, then position the grid as needed, and then lower the heads. At the same time, the heels of the rods of the mosquito in the openings, as it were, “wedged”.
   On plungers, a mosquito net can be fixed from the inside and outside, but such a mount has a number of disadvantages. It:
   • weakly holds a mosquito (the wind can push it in or take it out);
   • does not hold a natural load (the wind constantly and noticeably shakes the mesh, and because of this, the stock heels in any frame “drill holes”);
   • weakens the frame with holes for the rods;
   • is expensive due to the price of the plungers and the need to use a special tool.
2. Z-profiles. Grids with such fasteners come out compact (and take up minimal space during winter storage). However, self-assembly of the manufactured frame mosquito net on such a profile on the upper floors high-rise buildings extremely dangerous, since a person must lean out of the window almost halfway and at the same time try to install / fix something else. In addition, it will be necessary to drill the frame, which means that there is a high probability of losing the guarantee for a plastic window and making a focus of negative biological activity in a wooden window with your own hands.
3. On brackets. This fastening is similar to the Z-profile, but the thickness of the mesh package on the staples during winter storage is very large. In addition, the nets will have to be shifted with cardboard so that they do not tear each other's panels with staples. But the window frame remains intact. Therefore, a frame mesh on brackets is the best option for making do-it-yourself protection against dust and insects on windows. But only on wooden window structures and if the mesh frame is assembled from improvised materials.

measurements

Independent production of a mosquito begins, of course, with the necessary measurements.

Under Z-profile

If the window is wooden, measure the width and height of the light opening. They do this in several places, and the smallest indicator becomes relevant.

If we are talking about a PVC structure, then for a mosquito net on Z-profiles, the width and height are also measured, but already in the center (and if the opening led more than 2 mm, then in the narrowest part of the light opening) between the inner edges of the seals .

Under staples

To make a mosquito for installation on brackets, you should make almost the same measurements as indicated above. But you will have to adjust the dimensions of the frame, taking into account the width of the brackets used (from 12 mm). Because of this, the light opening will slightly narrow, but for the sake of expanding it, you should not use U-shaped brackets, which allow you to make the frame flush along inside window frames. The latter will be corrupted in this case.

Important: The height of the bracket shelf should be equal to the height of the threshold window slope with seal. And the paws of the upper brackets should be longer than the lower ones.

Homemade frames

To assemble such a mosquito net, you will need the following set of parts:

• 2 drains;
• 2 crossbars;
• impost (additional transverse beam);
• impost connector;
• metal or plastic corners, 4 sets;
• detailed fasteners in the required quantity;
• cord.

Imposts and fasteners for them are ordered optionally - one such element is placed every 60-80 cm of the frame in height.

What matters is the material from which the fasteners and profiles are made. So, for example, steel angles are cheap, but subject to corrosion over time. The PVC coating, which soon wears out, does not save them either. It is better to put plastic - they are good in all respects.

As for the frame profiles, they can be made of PVC or propylene.. The former are cheaper and not as durable, the latter are more expensive, but they serve up to 10 years if the anti-mosquito inserts are changed in a timely manner.

Frames on steel corners are mounted on through bolts, and on plastic ones - on self-tapping screws or standard latches. Additionally, you can fix them with the help of hardware.

Plastic profiles for frames can also be bought in long lengths - 3 or 6 m each. If you need to put frame mosquitoes on several windows at once, this is the best option. A special elastic ribbed cord is also sold by the meter, which allows you to put the mesh panel in the grooves in the most reliable way, with even pressure.

An excellent frame for a mosquito net is obtained from cable plastic channels (boxes) with a width of 10 to 60 mm. The cross section of such boxes for outdoor mosquitoes in Z-profiles should be square, then the frame will turn out to be strong and rigid. If the frame is supposed to be mounted on brackets, channels with an oblong cross section will do. These frames are assembled on steel corners, and fastened to the bolts by removing the covers of the boxes.

The impost, if required, is made from the same cable channel (cut off the required length), clogging its cover with more powerful glue (say, Construction Moment or Titanium), and caulking the ends with corks made of wood. In the frame, such an impost is planted on through wood screws.

Linen laying

The finished frame is placed horizontally, with the open groove upwards. The selected cellular fabric is cut out with an allowance (from 3 cm, but it is better if 10-15 cm). Then the finished panel is placed on top of the frame. It straightens and presses down with weights along the contour.

If the frame is made of a special profile, a cord is placed over the groove along the canvas and rolled with a roller until it is completely pressed into the groove. Excess mesh is cut off, leaving about 1 cm (above the groove).

If the frame was created from cable channels, then the covers of the narrow sides are first placed on the grid spread over the frame. Then they are gently pressed down along the entire length until they snap into place. In the same way, long lids are superimposed and crushed.

Handles and staples

The outdoor mosquito can not be put in place without handles. You can use soft and thin, made of cheap plastic. They are placed on the frame even before the mesh and are pressed into the profile grooves along with the cord. The disadvantage of such handles is that they often tear, besides, the sections of the cord above them are flattened. And you can’t put such handles on a frame made of cable channels - you have to look for something stronger and fix it on self-tapping screws.

Also, for an external home-made mesh, brackets-holders will be required. Plastic ones do not damage the frame, but are fragile and can break at any time. Steel spring clips are more reliable, but, pressing the mesh tightly against the window, they can scratch the frame. The best option- a spring clip with a piece of heat-shrinkable tube stretched over it. You can fix such a tube on the spring by heating it with a hairdryer or over gas burner(very careful).

no frame

There are situations when it is possible to install only a frameless mosquito net of your own manufacture on the window. In place, such grids are attached using:

• "burdock" adhesive tape (velcro);
• or special magnetic strips.

Each of these fastening systems has its own advantages / disadvantages, as well as the scope.

Velcro

Velcro tape holds mosquitoes very well. One half of it (the one with hooks) is attached to a wooden frame, and the second (fleshy) is sewn onto a cellular fabric along the entire edge. On a plastic window, such a tape is placed along the contour of the slope (internal, as viewed from the seal). On the winter storage mosquito nets are removed rolled up, and if you sew a hooked half of Velcro to the cloth, in the spring such a roll will not unfold - the hooks will grab tightly together. Therefore, it is necessary to act strictly as recommended.

There are many disadvantages to using adhesive tape. And the most significant of them, no matter how strange it may look, is the reliability of fastening. The hooked part of the tape is glued to the frame with super-strong glue, so it is almost impossible to remove it without damaging the frame. Often, this half of the Velcro tape pulls when removing the second - fleecy, tearing it off the mosquito cloth. That is why Velcro mesh is most often placed on balcony frames, where it safely serves the whole season without removal.

magnets

A homemade frameless mosquito is well placed on magnetic holders:

• single-pole for fastening steel;
• and bipolar for attachment to a non-magnetic base.

Grids on single-pole magnets are installed on car windows. In such cases, the magnetic tape is hidden in a drawstring made of dense thin fabric and sewn along the edge of the cellular anti-mosquito cloth, cut to the desired size and shape. Finished structures are simply applied to the windows, where they fit quite tightly along the contour, absolutely without damaging the bases.

Bipolar holders stick together very tightly, so they are great for installing mosquito nets on windows and doors in rooms. Such magnets can be bought in kits ready for installation, where the polarity of the tapes is pre-marked, and one of them is already sitting on Velcro. It is she who is attached to the fat-free base, and the second is hidden in a fabric sleeve and sewn along the edge of the anti-mosquito fabric.

A bipolar holder can be made independently from a pair of unipolar magnets. In addition, you only need double-sided tape. You will first need to mark the polarity of the tapes so that they do not stick together and do not bounce off each other when installing a frameless mosquito.

Mosquito net on bipolar magnets is the best option for window decoration and doorways at dachas, in tourist seasonal boarding houses and in houses at recreation centers. Such magnetic holders are also suitable for attaching the bottom and middle of the mosquito to the balcony door in the apartment. Provided that at the top and on the sides this mesh is fixed on the frame of the balcony door with the help of "burdock" Velcro.

If you decide to save money on purchasing insect repellents or insecticides, then it is worth remembering some very unpleasant moments that may accompany your communication with mosquitoes, mosquitoes and other flying, jumping and crawling brethren. After all, this is not just an amazing discomfort, an unpleasant sensation of touching the wings of an obsessive, ear-cutting sound.

What you need to know about the need for insect protection

With the current ecological situation and the speed of mutations, even familiar, familiar mosquitoes and midges can acquire the most incredible properties and qualities. At the same time, it is worth remembering that for thousands of years insects have been carriers and initiators of a wide variety of diseases - malaria, fevers and other epidemics. Huge continents experienced waves of gigantic pandemics that practically wiped out more than half of the population, devastating cities and entire states. It seemed that such tiny creatures could do? But they are the carriers of swamp fever and other no less dangerous tropical ailments, which affect not only the local population, but people of the European race. Numerous historically famous travelers and discoverers and lesser-known "tourists" of the past and present, those who managed to survive after traveling to the tropical and subtropical regions of Africa, America and the mysterious Indo-China, accurately describe all the horrors of those diseases that all kinds of flies and mosquitoes awarded them. If you have an opinion that it is anywhere but not here, then you are completely wrong.

Today, huge masses of the population migrate to those areas where such infections are widespread and there is a high probability that after a holiday in Malaysia or Singapore, part of the tourists will become passive carriers of a wide variety of pathogens. And this is not all that you need to be afraid of. It is equally interesting that you should also think about your own safety in relation to your body's allergies. After all, the bite of such a nondescript insect can easily cause not only unpleasant sensations, but represents a real danger to life - allergic reactions are very different and very dangerous.

However, all this can be avoided not only by applying medications, insect repellents and other chemicals. There is the most reliable and time-tested method in those countries where insects are common - mosquito nets on window openings and doors. Today it is made of modern materials and has an excellent design and elasticity. It not only perfectly protects against midges and mosquitoes, annoying fluff, which is so annoying when poplars bloom.

Reasons for installing a mosquito net

Nowadays, without exception, all models of plastic windows are offered by manufacturers complete with mosquito nets. So that she does not spoil your mood and does not interfere good review, you need to consult with experts and choose the right everything that will allow the grid to be perfect - the color of the canvases and the size of the cells. Then it is practically invisible and does not present any obstacle to sun rays and air currents. This is very important in the construction of a modern window, where you can open it slightly or fully open while maintaining the tension of the mesh web from insects. This function very beneficial for owners of housing and offices on the ground floors of buildings in big cities and on the main streets.

It is this simple device that has an excellent protective function against dust, fluff, small insects and even minor street debris. And on high floors, it can save the lives of your favorite pets - from a hamster, a parrot to a cat that loves to relax on the windowsills, watching what is happening below. Equally interesting is that the mosquito net is easy to install, which makes it very convenient to place on the door as well. Due to the fact that it can be of various sizes and configurations, it is installed on windows and doorways any scale. Then you will have a calm and peaceful sleep, an abundance of fresh air in the bedroom, a cheerful mood in the morning and a boost of energy for the whole future day.

In most cases, installing a net from mosquitoes and other insects does not cause difficulties and does not require special skills.

Design features of the mosquito net

Nothing new has been invented for hundreds of thousands of years. Mesh material is easy to perform, and modern innovative technologies allow you to create a lightweight structural model of a fixed type, which represents a simple frame with a canvas stretched over it. This is the simplest thing you could do with your own hands to protect against all sorts of unpleasant sensations and the consequences of mosquito bites. Do-it-yourself mosquito net on the window is very simple, you just need to study the technology and our manual well, choose the right materials.

The technology of this simple device is simple:

• first you need to resolve the issue with the choice of canvas. The best option would be a fiberglass product coated with a rubber compound, which is made on the basis chemical composition PVC;
• making a frame that matches the geometry and dimensions of the window or doorway where it will be located. They consist of special aluminum profile for mosquito nets, connected at the corners with plastic parts;
• overlaying the mesh and fixing it with structural rings or clamps to fix the mesh fiber.

If you have chosen just such a structure and fiber grade for the mesh, it will have the following qualities - resistance to atmospheric influences, excellent fire safety, not brittle in bends, and what is important for the external effect - does not discolor at all over time.

Types of grids and ease of use

Modern structural solutions for doors and windows are simply amazing, and the possibilities of their planar polyvariant opening make mosquito nets just as diverse. Today there are the following types:

• framework. Acceptable for any windows and doors, convenient and practical. Most suitable for those who like to make home improvements with my own hands, easy to clean and well processed, brackets and fasteners allow you to remove it for the winter months;
• door. The same as the previous version, but according to the size of the door, fastened with special hinges, easy to install and dismantle;
• roller shutter. It is convenient because the design allows you to hide them by folding them into a special aluminum case at the top of the opening;
• sliding. Used on terraces and balconies, has aluminum frame moving along the lower and upper rails on rollers. Easy to remove and washes great.

And at the end of our story about the benefits of mosquito nets, I would like to hope that you make a choice between duct tape, poison sprayers, fly swatters and mosquito repellents for the skin, and the possibility of simply making a mosquito net. If you wish, you can purchase it, but one way or another, after installing it, you will no longer meet insects, poplar fluff, plant seeds and banal street garbage in your apartment. Moreover, the prices are very democratic, and the product itself is worth buying or making urgently.

In contact with

Do-it-yourself mosquito net on magnets.

On sale there are curtains that trap insects on the street, the halves of which snap into place independently with magnets of reverse polarity. The products of the Chinese manufacturer require refinement, an analogue of these designs is easy to make at home.

The price of a meter of magnetic tape with an adhesive layer on the reverse side ranges from 50 to 30 rubles per linear meter. For window structures, one side of this tape is applied along the perimeter of the opening. In door and window openings, it processes three sides. Then the contour of the canvas is sheathed with fabric, into which the opposite side of the magnetic tape is passed.

The convenience of the design lies in the self-fixation of the valves, mobility, quick installation at the new place of operation. With self-manufacturing, the design is three times cheaper, the user uses the actual dimensions of the openings, guaranteeing complete blocking of access to insects. The only difficulty lies in correct location poles when passing through a fabric cover. It is impossible to mix up the polarity of the opposite side when gluing on the sides of the opening.

You can choose the density of the mesh yourself, additionally process it with sprays. In addition to insects in the premises, the amount of fluff, third-party debris that accidentally enters a room with a draft is significantly reduced. The design, unlike all previous modifications, is difficult to damage, which increases its resource.

MOSQUITO NETS OWN HANDS: MATERIALS, MANUFACTURING.

Not all window blocks are equipped with factory mosquitoes, some users are not satisfied with the large sizes of these products during off-season storage. Therefore, do-it-yourself mosquito nets are often created from improvised materials. There are several options without a rigid frame, homemade designs from the factory impost, suitable cable channels for electrical wiring.

Detachable options without frame

Do-it-yourself mosquito nets can be hung during operation on clothes, shoes, construction Velcro. The construction budget does not exceed 150 rubles, for which the canvas, fastener is purchased.

It is necessary to choose Velcro modifications, the reverse side of which has an adhesive layer. One part (with hooks) is glued along the perimeter of the window block near the sealing rubber band. This distance is different for the PVC profile of individual manufacturers, therefore, you should measure its value before visiting the store.

The counterpart (fluffy) is attached along the perimeter of the canvas, the excess is cut off with a knife. Instead of a standard mesh, fiberglass can be used, optimal color is black. Through the white cells, the contrast of the street space is reduced, therefore, this color is not recommended.

Removable mosquito net has another installation option. The budget will not increase, instead of a fastener you need to buy a cord (sold in sports, tourist, hardware stores). The diameter must correspond to 4 mm (it is checked by the label, but not by measuring manually), the larger one will not fit in the factory groove, the thin one will fly out of it.

Do-it-yourself mosquito nets of this type are cut to the size of the opening with a perimeter allowance of 3 - 2 cm. Installation is carried out in stages:

• the mesh is laid on a groove in PVC profile
• the cord is pressed through it into this groove, starting from the corner
• for convenience, a wallpaper narrow roller can be used
• stretching is carried out alternately: top, side, bottom, second vertical

The advantage of this method is the easy adjustment of the tension, the cord can be removed to smooth out wrinkles. There are no problems with storing the canvas after removing it in the fall. The seals removed for the summer are lubricated, their resource increases (there is no solar ultraviolet, weathering).

Mosquito net from factory impost

If there are stores in the city that sell components, accessories for PVC windows, it is easier to make mosquito nets with your own hands from these elements. The budget in this case will turn out to be maximum, however, the products will still cost less. For homemade mosquitoes you will need a kit:

• frame profile (impost)

• connecting corners

• canvas
• cord desired diameter
• pens
• fasteners (Z-brackets)

The dimensions of the structure are taken taking into account the size of the opening - it corresponds to the internal dimensions of the grid. Manufacturing technology looks like:

• impost cut - two vertical, two horizontal blanks, for greater rigidity, an average jumper from the same material can be used
• assembly - the frame is assembled using corners, extensions
• close-fitting - the mesh is superimposed on the frame, pinched inside the groove with a cord on one short side, then rubber compressor is tucked around the entire perimeter, the edge of the cord, the canvas is cut off
• installation - the structure slides into the brackets fixed on the outer frame

The advantage of the method is the factory quality of the elements, the presence original pens, corners, connectors. The impost is cut with a hacksaw, thanks to special elements, the cut is straight everywhere. The mosquito net does not differ in design, quality, resource from factory modifications.

Mosquito net from the cable channel

In small settlements the sale may not include components from window sides, manufactured in the factory or home master the addresses of these stores are unknown. In this case, do-it-yourself mosquito nets can be made from cable channels that are guaranteed to be present on the construction markets.

The budget for crafts is 300 - 400 rubles, all operations initially take 2 hours, subsequent mosquitoes are created twice as fast.

Manufacturing technology is as follows:

• cut - unlike the previous case, the edge is cut in the miter box at 45 degrees
• assembly - the greatest strength is provided by the connection with metal corners on rivets

• fixing the web - the mesh is snapped into place by the retaining plates of the cable channels around the perimeter, starting from the short side

Field installation is similar to the previous case. If necessary, brackets can be made independently from improvised materials:

• aluminum strip
• piece of pvc profile

• two corners connected by the reverse sides

So that the plastic of the cable channel does not burst at the moment of tension, the riveter is located on the side of the plastic, the crumpled part of the fastener is on the side of the metal plate. The diameter of the drill when making a hole is indicated on the package of rivets or is selected according to the table.

By making mosquito nets with your own hands, the user ensures maximum integration of the design into the size of the existing opening. The comfort of operation increases, there are no cracks through which penetration of insects is possible.

An effective means of protection against mosquitoes and other small insects is a mosquito net. You can buy a ready-made design, or you can make it yourself. Application modern materials allows you to make mosquito protection for the window from a mesh material that will fit snugly against the window frame and have a neat appearance.

Types of protective mesh

Before starting production, you need to decide what type of mesh you need. They differ in various ways:

• by type of fastening - on hooks, on Velcro, on pins, on Z-shaped brackets;
• by type of opening: stationary, removable, sliding, roll;
• by the presence of a frame: on a frame (frame), frameless;
• at the place of attachment: internal or external.

Below it will be described how to make frameless - stationary and removable, as well as a mosquito protection option - a mesh on a cable channel frame.

How to make a budget version of a frameless mesh?

The simplest version of a do-it-yourself frameless mesh is stationary. The canvas is simply glued to the window frame. But since the canvas itself does not hold well, a strip of material with good adhesion must first be sewn along its perimeter. It can be any fabric tape. If you are installing on a wooden window, the canvas can be additionally fixed with buttons. The advantage of this method is maximum simplicity, the disadvantage is that the mesh cannot be opened or removed to be cleaned of contaminants. That is, after a while it will have to be dismantled and the whole procedure to be performed again.

The second option is Velcro mesh. In order to make it yourself, you will need the following materials:

• anti-mosquito cloth;
• Velcro tape (velcro, "burdock");
• construction adhesive.

Part of the tape is attached with construction adhesive to the inner quarter. That is, to that part of the frame to which the window sash adjoins when closing. The second part is sewn along the perimeter of the mosquito net. Before applying the adhesive, the section of the frame on which the adhesive will be applied must be degreased and cleaned of dust. The advantages of this type of frameless mesh are “reusability”, if necessary, it can be slightly opened or completely removed. In terms of cost, it also refers to the budget option.

To attach the Velcro to the frame, it is better to choose a transparent rubber adhesive, such as Tytan, which is then easily removed without residue. This is especially important if the window is plastic - overwriting and repainting like a wooden one will not work here.

Do-it-yourself frame-type construction

To make a frame with your own hands, you will need the following elements.

• Rectangular cable channel (15×10 mm). The length is determined based on the outer perimeter of the frame, where the frame will be attached.
• Metal corners (10 mm) - 4 pcs.
• Blind rivets - 16 pcs.

Of the tools you will need a saw for metal and a drill. First of all, the dimensions are taken - height and width. From the cable channel we cut 4 pieces at an angle of 45 degrees and fold in the form of a rectangle. Having put the corners on top, you need to drill holes in the profile so that they exactly match the holes in the corners. Then, with the help of rivets, the structure is connected - and the frame is ready. Please note that when riveting, the riveter must be located outside the cable channel.

After the frame is ready, you need to fix the canvas in it. It is superimposed over the frame and snaps into place with the cover of the cable channel. To fix it evenly, without sagging, you need to start fastening along one of the long sides. At the same time, you need to make sure that there is no distortion. Then the canvas is fixed on one of the following sides of the frame.

It is better to fix the opposite sides with an assistant, as here you will need to provide a slight tension. At the same time, stretching the canvas, making sure that there is no skew and snapping the bar is inconvenient, so an extra pair of hands will come in handy here. The frame type mosquito net can be attached to the window in different ways. The most common is plunger, using Z-brackets.

To avoid snapping the bar, it is better to additionally fix it with glue. To do this, when the design is completely ready, a small amount of glue must be applied to the gap between the cable channel and its cover (bar).

How to choose a canvas?

The main element in any such design is the canvas. It is sold in rolls and by the meter. There are about 30 meters per roll. If you need to make 1-2 designs with your own hands, then it is better to buy by the footage. When comparing prices, please note: they can be indicated both per square meter and per linear meter. In terms of quality, the canvas differs in the following parameters:

• cell size;
• web thickness;
• material;
• strength.

The last indicator is important for the anti-cat grid. She withstands the "attack" of a pet, she is not afraid of cat's claws and teeth. Most good stuff for the manufacture of mosquito nets "antikoshka" - polyester with special impregnation.

If there is a cat in the house, then only a frame mosquito net can be installed. When installing, you need to take care of additional fasteners - the canvas to the frame and the frame to the window frame. This is necessary so that the animal does not fly out with the net.

The size of the cell is selected depending on the size of the insects in a particular area and what protection is needed from. The smallest cells have a cross section of 0.25x1 mm. They protect not only from mosquitoes, but also from small particles sand and dust. A canvas with cells of this size will also become an obstacle to poplar fluff. To protect against raindrops, the cross section should not be larger than 1x1 mm.

The material from which the canvas is made has great importance. It is he who is responsible for color stability and service life. The most reliable option is a fiberglass canvas with a polymer coating.

Having picked up a high-quality canvas, you can make a good mosquito net of a frame or frameless type with your own hands. It will have an aesthetic appearance, as well as meet all functional tasks. With it, you can ventilate the rooms without fear that uninvited visitors will fly into them: it will protect the house from mosquitoes, midges, and annoying flies.

With the advent of the first sunny days the issue of protecting your home from flies, mosquitoes, midges and other flying insects becomes relevant. Owners of wooden windows traditionally fasten gauze or mesh to the frame with buttons. And in other cases, the assembled mosquito net on plastic windows with your own hands can become a salvation. Frame or rolled mosquito net is easy to install and remove, does not require special care and strict rules for operation.

Types of mosquito net

You can independently make a design of two types:

1. Velcro;
2. frame mosquito net.

The first option is simpler and more budgetary. Any woman can make and install such a grid, even without special tools. Frame grids are more practical, they will last for several years, do not deform and retain their basic properties.

To make a mesh with Velcro, you will need: a canvas with a mesh size of 1x1 mm; Velcro tape, on one side of which there is a pile, and on the other, small flexible hooks-grabs; glue for cork wood or mosaic tiles. A strip of tape with hooks is attached with glue around the perimeter window frame. After that, the required mesh segment is measured and cut out. The remaining strip of tape with a fluffy pile is attached along the edge. It is recommended to attach it to the frame 24 hours after the glue has completely dried.

Making a frame grid with your own hands

The frame structure consists of the following elements:

1. net;
2. painted aluminum profile;
3. fasteners for the frame;
4. crossbar;
5. fasteners for the crossbar;
6. plastic fasteners for corners;
7. rubber cord seal;
8. handles-holders for installing the frame in the window opening.

At the very beginning, we will tell you how to measure a mosquito net on a plastic window. . Measurements must be taken with the window sash open. Height and width must match the light opening. 4.5 cm of the window frame at the top and 4 cm at the bottom must remain free, they will be equipped with fasteners for the frame. Subsequently, when making a frame, it is important to take into account the width of the aluminum profile. Its standard dimensions are 25 mm.

The assembly begins with the preparation of the aluminum profile. Points corresponding to measurements are applied to it with a pencil, vertical and horizontal planks of the frame are cut out on them. Between themselves, they are connected by plastic corners, forming a frame.

The crossbeam should be 50mm less than the width of the net in order to be easily inserted between the side vertical slats. The main purpose of this element is the tension of the mesh.

In the center of the frame, the mesh can shrink due to tension, and the bar will prevent this.

At first glance, it may seem that a do-it-yourself mosquito net for plastic windows is a complex design and only an experienced craftsman can handle it special tools. In fact, when measuring and assembling, you can use improvised tools: a school ruler, a kitchen or stationery knife, scissors, and a screwdriver and a hammer can be found in every home.

After the frame frame is assembled, you can begin to tension the mesh. To do this, the frame must be turned over. reverse side and lay on a stable horizontal plane. A piece of mesh is laid over the frame so that the protruding parts along the perimeter are equal.

Using a screwdriver or other flat thin object, a cord is tucked into the groove of the profile. It is placed on top of the mesh and holds it firmly inside the aluminum frame. In the process of work, it is important to stretch the canvas and straighten the formed folds.

Approximately in the center of the vertical slats, handles are installed for convenient installation of a mosquito net. They also roll up under the rubber cord. The remaining mesh fabric around the entire perimeter of the frame is cut with a blade or a clerical knife, giving the product a finished, neat and aesthetically beautiful appearance.

Installing the frame grid

Before installation, the profile of the window frame should be prepared. Its surface is cleaned of dust and wiped dry with a soft, lint-free cloth.

For installation, special fasteners are used, which are screwed to the frame with self-tapping screws. Two fasteners are placed on the lower horizontal bar of the window profile, they are slightly smaller in size than top mounts. For more convenient screwing, you can glue them to the frame with double-sided tape. After the screws are screwed in, it is recommended to process all the seams silicone sealant in order to maintain the waterproof and heat conductive properties of the plastic profile.

The upper fasteners are installed according to the same principle. To calculate their location, it is necessary to install the frame with the grid all the way to the bottom brackets, mark the height at the level of the top bar, then add 8 mm to this figure. When installing the mesh in the fasteners, you should hold the frame by the handles. First, the mosquito net is inserted all the way into the top brackets, and the bottom bar should pass freely over the bottom fasteners. The frame is close to window profile, then slowly lowers. If the top fasteners are not stable enough to hold the frame, it is recommended to reinstall them a few millimeters lower.

It is necessary to remove the mosquito net (for example, to clean it from dust and debris) as follows: holding the handles, the frame rises up, is removed from the lower fasteners, then falls down and exits the upper fasteners.

Summer has come. Finally, you can open the windows and ventilate the apartment. But besides fresh and warm air summer can bring unexpected guests to your home, ranging from annoying mosquitoes to flies, bees and other living creatures. To avoid such a neighborhood, you should think about purchasing a mosquito net. But why buy it when you can make it yourself? Moreover, even a person who is not familiar with the basics of construction can make it. So, we need a mosquito net with our own hands. Making such a design will be quite simple.

Doing it better on your own

If you are thinking about getting rid of annoying insects, then, most likely, they are already interested in purchasing or making a mesh from them. So, how is a do-it-yourself mosquito net for plastic windows made? It is clear that a plastic window is not a wooden one for you. That is, you cannot drive nails into it. Therefore, there will be some nuances in creating a grid.

What do you need?

So we need the following:

The canvas itself, from which then a mosquito net for plastic windows will turn out. Everyone will be able to fix it with their own hands in the right place.

Contact tape (in the common people it is called "burdock" and is sold in any sewing store).

Frost-resistant glue (preferably transparent, but any will do).

That's all the materials that we need. Their total cost is unlikely to exceed the limit of 200-300 rubles. The only thing that can spoil your mood is going shopping in search of the necessary goods. After acquiring everything you need, you can proceed directly to the creation of your masterpiece.

Preparation method

Work begins with the fact that the window you have chosen should be carefully prepared - wash the frames from dust and dirt, and then wipe the surface dry. This will provide best connection with our design. After the surface is ready, a thin bead of glue should be applied to each frame. We will put one side of the Velcro on it (the one with hooks). Do not be afraid to apply glue - the meshes created on the plastic windows will be easily removed. And if you want to remove the glue, you can easily do it with a spatula. Next you need to measure right amount grid and trim it under In order not to make a mistake with the size, you can attach it to the glued Velcro (only after the glue has dried!) And make the necessary marks. The second side of the contact tape (the one that is "fluffy") should be carefully stitched along the perimeter to the edges of the grid. It will be more correct if you sew the fastener along both edges, but one seam in the middle will also work. Now it remains to attach the finished mesh to and then connect our "burdock". Now you can not be afraid that "enemies" will pass through the plastic windows: the mosquito net does an excellent job with all pests and does not let them into the house.

Conclusion

As you can see, there is nothing difficult in the manufacture of this thing. And if you take the initiative and put your hands on it, then soon you will have your own mosquito net for plastic windows. You can do a lot with your own hands, the main thing is desire.

Intrusive insects interfere with living and sleeping peacefully at night in the warm season. They fly into the house through open windows. Despite the presence a large number special sprays and electric mosquito traps, only a mosquito net can significantly reduce the number of insects. Today, when replacing windows, you can additionally order this element, which costs money. How to solve the problem in the budget version? In fact, everything is very simple, since a do-it-yourself mosquito net is mounted very quickly from available materials.

Protective nets

Before you go to the hardware store for all the necessary components, you should decide on the type of mesh. All of them differ in different parameters:

1. By type of attachment: hooks, Velcro, pins and Z-brackets.
2. By type of opening: stationary, removable, sliding and roll.
3. By the presence of a frame: frame and frameless.
4. According to the place of attachment: internal and external.

Each of these types has its own advantages and disadvantages, but also disadvantages. All this is important to consider in order to right choice and don't waste your money. Particular attention is paid to the method of attachment, so let's figure it out: what are the pros and cons?

1. The frame is very rigid, because it is made of metal with a mesh cloth. It can be installed both on plastic and wooden windows from any side.
2. The sliding mount is only suitable for aluminum windows, as sliding sashes will be used.
3. A mosquito net with magnets is a very relevant option for those who want to quickly get rid of insects. It attaches to both windows and doors. In the latter case, you can not worry about the patency, as the curtains easily open and close instantly.
4. Rolled nets will allow you to effectively fight mosquitoes. The material can be easily rolled up and unfolded from a cassette placed above the window.
5. The simple Velcro fasteners are also easy to attach and remove. At the same time, the mesh can be washed in the washing machine at any time.

Mosquito nets are installed not only on windows, but also on doors, as mosquitoes and midges also penetrate through them.

Canvas selection

The main element of any mosquito net is the canvas. You can buy it in any hardware store per meter or in a roll (approximately 30 m). If you need to make only a couple of grids, then it is better not to spend money and buy required amount meters. For more protective nets, it is worth comparing prices: they may differ per square meter and per linear meter.

If we talk about quality, then it is important to consider several parameters:

• cell size;
• web thickness;
• material type;
• strength.

To create an anti-cat net, the strength parameter is very important, since it must withstand all the “attacks” of pets. by the most ideal option for this will be polyester with special impregnation. Additional fasteners are also required. It is especially important to install such mosquito nets on the balcony.

When determining the size of the cells, consider the size of the insects in the area from which additional protection. Minimum size section is 0.25×1 mm. Such a mesh can become a reliable protector not only from mosquitoes and flies, but even from sand, poplar fluff and dust. To protect windows and the room from rain, experts recommend a section of 1 × 1 mm.

Having decided on the materials and making necessary purchases you can start making. How to make a mosquito net for a frame and frameless window yourself will be discussed below. The protection will be as functional as it was from production.

The material from which it is made will be responsible for the quality of the protective mesh. Recently, polymer-coated fiberglass has become the most popular.

Manufacturing of frameless mesh

This is the easiest and most budget option that will allow you to make a removable mosquito net by spending little money. The easiest way to make the protection stationary is to glue the canvas to the window frame. To make it better fixed at the edges, a tape of material with high adhesion properties is sewn on. When it comes to wooden windows, ordinary pushpins can act as additional fasteners. There is one significant drawback here - such a mesh cannot be removed for washing.

It is better to put a little more money and effort to get universal protection. It's a Velcro mesh. To make it yourself, you will need the following materials:

• anti-mosquito material according to the size of the window;
• Velcro tape (burdock - one side with a pile, the other with hooks);
• construction adhesive.

Measurements are taken along the inner (opening) part of the window with a margin of 1 cm on each side. This size is necessary to fix the future mosquito net. One part of the adhesive tape is fixed around the perimeter of the window using building glue (for example, Titanium) or simple double-sided tape. The second is sewn around the entire perimeter of the mesh. When everything is ready and the glue is completely dry, you can fix the protective sheet.

The whole process of work takes a maximum of 2 hours, and as a result, everyone receives reliable protection from insects.

Before gluing Velcro to plastic, it should be thoroughly washed and degreased with alcohol.

Fabrication of a frame type mesh

Unlike the previous method, it is somewhat more complicated, but still everyone can handle it. It should be noted that this option is also suitable for the manufacture of a mosquito net on the door. So, for mounting the frame with your own hands, you will need the following components:

• cable channel of rectangular section 15 × 10 cm (the length is determined independently based on the outer parameters of the frame, where the frame will be fixed);
• metal corners 10 mm - 4 pcs.;
• blind rivets - 16 pcs.;
• thin nylon mesh;
• construction adhesive.

Instruments:

• whetstone;
• pencil;
• scissors;
• roulette.

We turn to the construction of the structure:

1. We measure the outer side of the window opening. Based on the data received, a frame will be made.
2. Celebrate on plastic box length and width.
3. Using a knife, cut off the vertical and horizontal parts at an angle of 45 °. The places of cuts are carefully polished with a whetstone.
4. We assemble the structure: we fix the corners with special connecting metal corners with rivets (nuts and screws are also suitable).
5. We apply a mosquito net with an allowance of 2 cm on each side.
6. In the upper part, we clamp the canvas with the cover of the plastic cable channel. In the process of snapping, we change the long and short sides. For reliability, some places are glued with glue.
7. Cut off excess fabric with scissors.

The finished mosquito net is installed in the window opening using Z-shaped brackets.

And this is how a grid is assembled from a special profile:

Restoration of mosquito nets

An equally important process is the restoration, which includes the following main stages:

• Removing the frame from the brackets.
• Cleaning from dust and dirt.
• Removal of damaged capron.
• Installation of the repaired mesh in the window opening.

Before replacing any element in the structure, it is necessary to pay attention to how it is fixed and whether it can be removed. Most of the elements on the mosquito net from the manufacturer are fixed with a special sealing cord. If you carefully remove it, the holders will easily be removed.

All repairs are carried out very carefully. It is important to remember that you are working with a fragile structure.

As you can see, in order to make a mosquito net with your own hands, you will have to spend 2 or even 3 times less than when ordering a similar design from the manufacturer. In addition, the installation process is quite simple, does not require special knowledge and equipment.

Video

See below the instructions for making a mosquito net for plastic windows:

You can do without making a frame, if you act like this: