In particular, in section 1 " Explanatory note» information on the use of renewable energy sources and secondary energy resources will be entered.

Subscribe to our newsletter

Areas of attestation by RosTechNadzor

Drop-down list

A. General industrial safety requirements

• A.1. Certification of managers and specialists of organizations on the basics industrial safety

B.1. Industrial safety requirements in the chemical, petrochemical and oil refining industries

• B.1.1. Certification of managers and specialists of organizations operating paint and varnish production
• B.1.2. Certification of managers and specialists of organizations operating oil refining facilities
• B.1.3. Certification of managers and specialists of organizations operating chemical and petrochemical facilities
• B.1.4. Certification of managers and specialists of organizations operating facilities using inorganic acids and alkali
• B.1.5. Certification of managers and specialists of organizations operating facilities using chlorine
• B.1.6. Certification of managers and specialists of organizations operating production mineral fertilizers
• B.1.7. Certification of managers and specialists of organizations operating ammonia refrigeration units
• B.1.9. Certification of managers and specialists of organizations operating gas processing plants and industries
• B.1.10. Certification of managers and specialists of power industry organizations operating petrochemical facilities
• B.1.11. Certification of managers and specialists of organizations engaged in the design of facilities chemical industry
• B.1.12. Certification of managers and specialists of organizations engaged in the design of chemical and petrochemical industry facilities
• B.1.13. Certification of managers and specialists of organizations engaged in the design of oil refining industry facilities
• B.1.14. Certification of managers and specialists of organizations engaged in construction, reconstruction, overhaul chemical industry facilities
• B.1.15. Certification of managers and specialists of organizations engaged in the construction, reconstruction, overhaul of chemical and petrochemical industry facilities
• B.1.16. Certification of managers and specialists of organizations engaged in construction, reconstruction, overhaul of oil refining industry facilities
• B.1.17. Certification of managers and specialists on the procedure safe conduct repair work on chemical, petrochemical and oil refining hazardous production facilities
• B.1.19. Certification of managers and specialists of organizations for the organization of safe gas hazardous work
• B.1.20. Certification of managers and specialists of organizations operating smoke and ventilation industrial pipes
• B.1.22. Certification of managers and specialists of organizations operating compressor units with reciprocating compressors operating on explosive and harmful gases
• B.1.23. Certification of managers and specialists of organizations operating stationary compressor units, air pipelines and gas pipelines
• B.1.25. Certification of managers and specialists of organizations engaged in the production of hydrogen by water electrolysis
• B.1.26. Certification of managers and specialists of organizations related to the production and consumption of air separation products

B2. Industrial safety requirements in the oil and gas industry

• B.2.1. Certification of managers and specialists of organizations operating oil and gas industry facilities
• B.2.2. Certification of managers and specialists of organizations engaged in the repair of oil and gas wells
• B.2.3. Certification of managers and specialists of organizations designing oil and gas production facilities
• B.2.4. Certification of managers and specialists of organizations carrying out repair, installation and commissioning work at hazardous oil and gas production facilities
• B.2.5. Certification of managers and specialists of organizations engaged in the development of oil and gas fields on the continental shelf
• B.2.6. Certification of managers and specialists of organizations engaged in the construction of oil and gas wells
• B.2.7. Certification of managers and specialists of organizations operating oil trunk pipelines and oil product pipelines
• B.2.8. Certification of managers and specialists of organizations operating gas pipelines
• B.2.9. Certification of managers and specialists of organizations operating main pipelines for transporting liquid ammonia
• B.2.10. Certification of managers and specialists of organizations operating oilfield pipelines for oil and gas transportation
• B.2.11. Certification of managers and specialists of organizations engaged in the production, storage and distribution of liquefied natural gas at GDS MG and CNG stations
• B.2.12. Certification of managers and specialists of organizations operating underground gas storage facilities in porous reservoirs
• B.2.13. Certification of managers and specialists of organizations engaged in the design, construction, reconstruction and overhaul of oil and gas industry facilities
• B.2.15. Certification of managers and specialists of organizations operating compressor units with reciprocating compressors operating on explosive and harmful gases
• B.2.16. Certification of managers and specialists of organizations operating stationary compressor units, air pipelines and gas pipelines

B3. Industrial safety requirements in the metallurgical industry

• B.3.1. Certification of managers and specialists of organizations with foundries of ferrous and non-ferrous metals
• B.3.2. Certification of managers and specialists of organizations with copper-nickel production
• B.3.3. Certification of managers and specialists of organizations with coke production
• B.3.4. Certification of managers and specialists of organizations producing primary aluminum
• B.3.5. Certification of managers and specialists of organizations producing rare, noble and other non-ferrous metals
• B.3.6. Certification of managers and specialists of steelmaking organizations
• B.3.7. Certification of managers and specialists of ferroalloy production organizations
• B.3.8. Certification of managers and specialists of organizations with a full metallurgical cycle
• B.3.9. Certification of managers and specialists of organizations engaged in the design of facilities metallurgical industry
• B.3.10. Certification of managers and specialists of organizations engaged in the construction, reconstruction, overhaul of metallurgical industry facilities
• B.3.11. Certification of managers and specialists of organizations operating smoke and ventilation industrial pipes
• B.3.13. Certification of managers and specialists of organizations related to the production and consumption of air separation products

B4. Industrial safety requirements in the mining industry

• B.4.1. Certification in the field of industrial safety of managers and specialists of organizations engaged in crushing, sorting, enrichment of minerals and agglomeration of ores and concentrates
• B.4.2. Certification in the field of industrial safety of managers and specialists of organizations engaged in construction, reconstruction, overhaul underground structures
• B.4.3. Certification in the field of industrial safety of managers and specialists of organizations engaged in the development of mineral deposits open way
• B.4.4. Certification in the field of industrial safety of managers and specialists of organizations engaged in the development of ore, non-metallic and alluvial mineral deposits by underground mining
• B.4.5. Certification of managers and specialists of organizations engaged in the design of mining facilities
• B.4.4. Certification of managers and specialists of organizations engaged in the construction, reconstruction, overhaul of mining facilities

B5. Industrial safety requirements in the coal industry

• B.5.1. Certification of managers and specialists of organizations engaged in the development of coal deposits by open pit
• B.5.2. Certification of managers and specialists of organizations engaged in enrichment and briquetting of coal (shale)
• B.5.3. Certification of managers and specialists of organizations engaged in the development of coal deposits by the underground method

B6. Requirements for mine surveying to ensure the safe conduct of mining operations

• B.6.1. Certification in the field of mine surveying ensuring the safe conduct of mining operations for managers and specialists of organizations carrying out work related to the use of subsoil and their design
• B.6.2. Certification in the field of mine surveying ensuring the safe conduct of mining operations for managers and specialists of organizations engaged in the use of subsoil for purposes not related to the extraction of minerals, as well as the construction and operation of hydraulic structures
• B.6.3. Certification in the field of mine surveying for the safe conduct of mining operations for managers and specialists of organizations engaged in the development of ore and non-metallic mineral deposits
• B.6.4. Certification in the field of mine surveying to ensure the safe conduct of mining operations for managers and specialists of organizations engaged in the development of plate mineral deposits
• B.6.5. Certification in the field of mine surveying to ensure the safe conduct of mining operations for managers and specialists of organizations engaged in the development of deposits of hydrocarbon raw materials and hydro-mineral resources

B7. Industrial safety requirements at gas distribution and gas consumption facilities

• B.7.1. Certification of managers and specialists of organizations responsible for ensuring safety during the operation of gas distribution and gas consumption systems
• B.7.2. Certification of managers and specialists of organizations operating facilities using liquefied hydrocarbon gases
• B.7.3. Certification of managers and specialists of organizations for industrial safety in the operation of automobile filling stations of liquefied hydrocarbon gas
• B.7.4. Certification of managers and specialists of organizations operating gas distribution and gas consumption systems
• B.7.5. Certification of managers and specialists of organizations responsible for conducting technical supervision for the design and construction of gas distribution and gas consumption systems
• B.7.6. Certification of managers and specialists of organizations engaged in the design of gas distribution and gas consumption facilities
• B.7.7. Certification of managers and specialists of organizations engaged in construction, reconstruction, overhaul of gas distribution and gas consumption facilities

B8. Industrial safety requirements for pressure equipment

• B.8.21. Operation of boilers (steam, hot water, with organic and non-organic heat carriers) at hazardous production facilities
• B.8.22. Operation of steam pipelines and hot water at hazardous production facilities
• B.8.23. Operation of pressure vessels at hazardous production facilities
• B.8.24. Operation of medical and diving pressure chambers at hazardous production facilities
• B.8.25. Filling, technical examination and repair of cylinders for storage and transportation of compressed, liquefied and dissolved under pressure gases used at hazardous production facilities
• B.8.26. Activities related to the design, construction, reconstruction, overhaul and technical re-equipment of hazardous production facilities, installation (dismantling), adjustment, maintenance and repair (reconstruction) of equipment operating under excessive pressure used at hazardous production facilities

B9. Industrial safety requirements for lifting structures

• B.9.22. Certification of specialists of organizations for supervision of the safe operation of escalators in subways
• B.9.23. Certification of members of certification commissions of organizations operating escalators in subways
• B.9.27. Certification in the field of industrial safety of managers and specialists of the cable car
• B.9.28. Certification in the field of industrial safety of the chiefs of ropeways
• B.9.31. Operation of hazardous production facilities that use lifting structures designed to lift and move goods
• B.9.32. Operation of hazardous production facilities that use lifting structures designed to lift and transport people
• B.9.33. Installation, adjustment, repair, reconstruction or modernization of lifting structures during the operation of hazardous production facilities

B10. Industrial safety requirements for the transportation of hazardous substances

• B.10.1. Certification of managers and specialists responsible for safety during the transportation of hazardous substances at hazardous production facilities

B11. Industrial safety requirements at explosive storage and processing facilities for plant raw materials

• B.11.1. Certification of managers and specialists of organizations operating storage and processing facilities of plant raw materials

B12. Industrial safety requirements related to blasting

• B.12.1. Certification of managers and specialists of organizations that carry out explosive work in underground workings and on the surface of mines (objects of the mining and non-metallic industry), coal and shale mines hazardous (not hazardous) in terms of gas or dust. Special blasting
• B.12.2. Certification of managers and specialists of organizations carrying out blasting operations in open-pit mining and special blasting operations

G1. Requirements for the order of work in electrical installations of consumers

• D.1.1. Certification of managers and specialists of organizations operating electrical installations

G2. Requirements for the order of work at thermal power plants and thermal networks

• D.2.1. Certification of managers and specialists of organizations operating thermal power plants and heating networks

G3. Requirements for the operation of power plants and networks

• D.3.1. Certification of managers and specialists of organizations operating thermal power plants
• D.3.2. Certification of managers and specialists of organizations operating electrical networks

E. Requirements for the safety of hydraulic structures

• D.1. Certification of managers and specialists of organizations in the field of safety of hydraulic structures of industrial facilities
• D 2. Certification of managers and specialists of organizations in the field of safety of hydraulic structures of energy facilities
• D.3. Certification of managers and specialists of organizations in the field of safety of hydraulic structures of water management facilities
• D.4. Certification of managers and specialists of expert organizations that carry out examination of declarations of safety of hydraulic structures

Download certification areas.

With changes and additions from:
July 5, 2007, August 27, 2010, December 15, 2011, December 19, 2012, December 6, 2013
In pursuance of federal laws of July 21, 1997 N 116-FZ "On the industrial safety of hazardous production facilities" (Collection of Legislation Russian Federation, 1997, N 30, art. 3588), dated January 10, 2002 N 7-FZ "On the protection environment"(Collected Legislation of the Russian Federation, 2002, N 2, Art. 133), dated March 26, 2003 N 35-FZ "On the Electric Power Industry" (Collected Legislation of the Russian Federation, 2003, N 13, Art. 1177), dated July 21 1997 N 117-FZ "On the safety of hydraulic structures" (Collected Legislation of the Russian Federation, 1997, N 30, Art. 3589), dated November 21, 1995 N 170-FZ "On the Use of Atomic Energy" (Collected Legislation of the Russian Federation , 11/27/1995, N 48, art. 4552), Decrees of the Government of the Russian Federation of May 16, 2005 N 303 "On the delimitation of powers federal bodies executive authority in the field of ensuring the biological and chemical safety of the Russian Federation" (Sobraniye zakonodatelstva Rossiyskoy Federatsii, 2005, N 21, art. 2023), dated March 3, 1997 N 240 "On approval of the list of positions of employees of nuclear facilities that must receive permission of the Federal Supervision of Russia for Nuclear and Radiation Safety for the right to conduct work in the field of the use of atomic energy" (Sobraniye Zakonodatelstva Rossiyskoy Federatsii, 1997, No. 10, Art. 1180) I order:
1. Approve:
Regulations on the organization of work on the training and certification of specialists from organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision;
Regulations on the organization of training and testing the knowledge of workers' organizations supervised by the Federal Service for Ecological, Technological and Nuclear Supervision.
2. Send in the prescribed manner the Regulation on the organization of work on the training and certification of specialists of organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision and the Regulation on the organization of training and testing the knowledge of workers' organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision for registration to the Ministry of Justice of the Russian Federation.

Head K.B. Pulikovsky

Appendix

Regulations on the organization of work on the training and certification of specialists from organizations supervised by the Federal Service for Ecological, Technological and Nuclear Supervision

(approved by order Federal Service on Environmental, Technological and Nuclear Supervision of January 29, 2007 N 37)
August 27, 2010, December 15, 2011, December 19, 2012, December 6, 2013

I. General provisions
1. Regulations on the organization of work on the training and certification of specialists from organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision (hereinafter referred to as the Regulations) were developed in accordance with federal laws of July 21, 1997 N 116-FZ "On the industrial safety of hazardous production facilities" (Sobraniye zakonodatelstva Rossiyskoy Federatsii, 1997, N 30, art. 3588), dated January 10, 2002 N 7-FZ "On environmental protection" (Collected legislation of the Russian Federation, 2002, N 2, art. 133) , dated March 26, 2003 N 35-FZ "On the Electric Power Industry" (Collection of Legislation of the Russian Federation, 2003, N 13, Art. 1177), dated July 21, 1997 N 117-FZ "On the Safety of Hydraulic Structures" (Collection of Legislation of the Russian Federation, 1997, N 30, article 3589), of November 21, 1995 N 170-FZ "On the use of atomic energy" (Sobraniye zakonodatelstva Rossiyskoy Federatsii, 1995, N 48, article 4552), resolutions of the Government of the Russian Federation dated 16 May 2005 N 303 "On the delimitation of powers of federal executive bodies in the field of ensuring the biological and chemical safety of the Russian Federation" (Collected Legislation of the Russian Federation, 2005, N 21, art. 2023), dated March 3, 1997 N 240 "On approval of the list of positions of employees of nuclear facilities that must obtain permits from the Federal Service for Ecological, Technological and Nuclear Supervision for the right to conduct work in the field of the use of atomic energy" (Collected Legislation of the Russian Federation , 1997, N 10, article 1180).
2. This Regulation establishes the procedure for organizing work on the training and certification of specialists ( officials) organizations that carry out in relation to a hazardous production facility, an energy facility, a facility at which thermal and electrical installations and networks are operated, a hydraulic structure (hereinafter referred to as facilities) their design, construction, operation, reconstruction, overhaul, technical re-equipment, conservation and liquidation, as well as the manufacture, installation, adjustment, maintenance and repair of the technical devices, technical means, machinery and equipment, as well as training and retraining of managers and security specialists.
If for certain categories of specialists, regulatory legal acts establish Additional requirements to the verification and control of knowledge on safety, then the requirements provided for by these regulatory legal acts also apply.
3. Training and certification of specialists in security issues is carried out in the amount corresponding to the official duties.
4. During certification on safety issues, knowledge is tested:
A) general industrial safety requirements established by federal laws and other regulatory legal acts of the Russian Federation;
B) industrial safety requirements on special issues related to the competence of the person being certified, established in regulatory legal acts and regulatory and technical documents;
B) excluded
D) energy security requirements established by federal laws and other regulatory legal acts of the Russian Federation and regulatory and technical documents;
E) safety requirements for hydraulic structures established by federal laws and other regulatory legal acts of the Russian Federation and regulatory and technical documents;
E) excluded.
When forming exam tickets they include at least five questions (test tasks) for each of the certification areas.

II. Security training**

Chairman

Members of the Commission _____________________(___________________)

_____________________(___________________)

_____________________(___________________)

_____________________________

* - are established by the Federal Service for Ecological, Technological and Nuclear Supervision.".

Appendix No. 2
to Regulation

Has lost its power.

Appendix No. 3
to the Regulations on the organization of work on the preparation and
certification of specialists of organizations supervised
Federal Service for Ecological, Technological
and nuclear supervision, approved by order
Federal Service for Ecological,
technological and nuclear supervision
dated January 29, 2007 N 37
(as amended on August 27, 2010, December 15, 2011,
December 6, 2013)

Submitted for certification:

Position
on the organization of training and testing the knowledge of working organizations supervised by the Federal Service for Ecological, Technological and Nuclear Supervision
(approved by order of the Federal Service for Ecological, Technological and Nuclear Supervision dated January 29, 2007 N 37)
With changes and additions from:
July 5, 2007, December 15, 2011
I. General provisions

1. The regulation on the organization of training and testing the knowledge of workers' organizations supervised by the Federal Service for Ecological, Technological and Nuclear Supervision (hereinafter referred to as the Regulation) was developed taking into account the social significance of ensuring the state of protection of the vital interests of the individual and society from internal threats related to ensuring industrial, energy security, safety of hydraulic structures (hereinafter referred to as safety).
2. This Regulation sets out the requirements that are taken into account when organizing and conducting training and testing knowledge on the safety of workers in the main professions of organizations (regardless of the organizational and legal forms and forms of ownership of these organizations) that carry out construction, operation, reconstruction, technical re-equipment, conservation and liquidation hazardous production facility; electric power facility; facility that operates electrical, thermal installations and networks, hydraulic structures (hereinafter referred to as the facility), manufacturing, installation, adjustment, maintenance and repair of technical devices (machinery and equipment) used at facilities, transportation of hazardous substances.
3. If additional requirements for training and control of safety knowledge are established by regulatory legal acts for certain categories of workers in the main professions, then the requirements provided for by these regulatory legal acts shall also apply.
4. Checking the knowledge of workers of the main professions in the field of safety is carried out in the scope of qualification requirements, as well as in the scope of the requirements of production instructions and / or instructions for this profession.
5. Excluded.
6. The head of the organization (employer) is responsible for the organization of timely and high-quality training and testing of knowledge in the whole organization, and in the division of the organization - the head of the division.

II. Vocational training for workers in basic professions

7. Training of workers in basic professions includes:
- training of newly hired workers;
- retraining (retraining) of workers;
- training of workers in the second (adjacent) professions;
- professional development of workers.
The training of newly accepted workers of the main professions is carried out in organizations (institutions) that implement programs vocational training, additional vocational education, primary vocational education, in accordance with the license for the right to conduct educational activities.
Vocational training programs for workers in the main professions are developed by organizations (institutions) that implement these programs in accordance with the qualification requirements for each category of a particular profession and the established training period. Vocational training programs provide theoretical and industrial training.

8. Vocational training programs are coordinated with the Federal Service for Ecological, Technological and Nuclear Supervision or its territorial bodies. The list of the main professions of workers, whose training programs must be coordinated with the Federal Service for Environmental, Technological and Nuclear Supervision, is approved by the Federal Service for Environmental, Technological and Nuclear Supervision.
9. Individual theoretical training of newly accepted workers of the main professions is not allowed. Theoretical and industrial training is carried out in a training group.
10. Industrial training is carried out on the educational and material base (training laboratories, workshops, sites, workshops, simulators, training grounds, etc.), the equipment of which ensures the high-quality development of the practical skills of trainees. Industrial training is carried out under the guidance of a teacher, a master of industrial training or a highly skilled worker.
11. At the end of the training, a final examination is held to check theoretical knowledge and practical skills of students. According to the results of the exam, on the basis of the protocol of the qualification commission, the student is assigned a qualification (profession), a rank, and a certificate is issued. Persons who have completed training and successfully passed exams in the prescribed manner on the conduct of specific work at the facility, in addition to the certificate, are issued an appropriate certificate for admission to these works. The qualification commission is formed by the order of the head of the organization conducting the training. Representatives of the territorial body of the Federal Service for Ecological, Technological and Nuclear Supervision are included in the composition of the qualification commission upon agreement. Persons who conducted the training are not included in the qualification commission.
Specialists with higher and secondary specialized education working in blue-collar specialties are credited with a theoretical course confirmed by a diploma in the relevant specialty within the framework of the training program for newly hired workers, and for a practical course - internship at the workplace.
12. Retraining (retraining) of workers in the main professions is organized with the aim of mastering new professions by the released workers who cannot be used in their existing professions, as well as by persons who have expressed a desire to change their profession.
13. Training of workers in the second (related) professions is organized with the aim of obtaining a new profession with an initial or more high level qualifications.
14. The training procedure provided for in the training of newly accepted workers in the main professions applies to retraining (retraining), as well as the training of workers in the second (related) professions. The development and approval of training programs for retraining (retraining), as well as training of workers in the second (related) professions, is carried out by the organizations specified in paragraph 7 of this Regulation, in accordance with the training programs for newly hired workers. The terms for mastering retraining (retraining) programs, as well as training workers for second (related) professions, can be reduced, but not more than half the training period for newly hired workers.
15. Raising the qualifications of workers is aimed at improving their professional knowledge, skills, skills, and the growth of skills in existing professions. Professional development is carried out in educational institutions in accordance with the license for the right to conduct educational activities.
16. Vocational training of workers is carried out by specialists (teachers, masters of industrial training), for whom work in an organization providing vocational training of workers is the main one. Teachers and masters of industrial training must have knowledge of the basics of pedagogy, have the appropriate education and practical experience work, pass certification in accordance with the Regulations on the organization of work on the training and certification of specialists from organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision, in accordance with the specialization (subject taught).
17. Excluded.
III. Safety briefing, training, admission to independent work, knowledge check

18. Before being allowed to work independently at the facility, workers undergo safety briefing and on-the-job training.
19. By the nature and timing of the safety briefings are divided into:
- introductory;
- primary;
- repeated;
- unscheduled.
The development of programs for safety briefings, the registration of their results is carried out in the manner established in the organization supervised by the Federal Service for Environmental, Technological and Nuclear Supervision.
20. An introductory safety briefing is carried out with all newly hired workers, regardless of their work experience in this profession, temporary workers, business travelers, students and students who have arrived for training or industrial practice. The introductory briefing is carried out by the employee who is entrusted with these duties by order of the organization. Relevant specialists may be involved in conducting individual sections of the introductory briefing. Introductory safety briefing is carried out in a specially equipped room using modern technical training aids and visual aids.
21. Initial safety briefing at the workplace is carried out with workers before their start. production activities. Workers who are not associated with the maintenance, testing, adjustment and repair of equipment, the use of tools, the storage and use of raw materials and materials, do not undergo safety training at the workplace. Initial briefing at the workplace is carried out with each individual with a practical demonstration of safe working methods. Primary safety briefing is possible with a group of people serving the same type of equipment, and within a common workplace.
22. After the initial safety briefing at the workplace, all workers undergo an internship at a specific workplace under the guidance of experienced workers appointed by order of the organization. The same order determines the duration of the internship (at least 2 shifts).
23. Repeated briefing on safety at the workplace is carried out at least once every six months.

24. Unscheduled safety briefing is carried out by:
- when it changes technological process, replacement or modernization of equipment affecting safety;
- in case of violation of safety requirements;
- with a break in work for more than 30 calendar days;
- by order of officials of the territorial bodies of the Federal Service for Ecological, Technological and Nuclear Supervision when they perform official duties.
25. Initial safety briefing at the workplace, as well as repeated and unscheduled safety briefings are conducted by the immediate supervisor of the work. The safety briefing at the workplace ends with a test of knowledge by oral questioning or with the help of technical training aids, as well as a test of acquired skills. safe ways work. Knowledge is checked by the employee who conducted the briefing. Persons who have shown unsatisfactory knowledge pass it again within the time limits established by the employee who conducted the briefing.

26. In the organizations specified in paragraph 2 of this Regulation, they develop and approve in the manner established in these organizations, manufacturing instructions and/or instructions for specific professions. Specified Instructions are located at workplaces and are issued against signature to workers, for whom knowledge of these instructions is mandatory. Before being allowed to work independently, after a safety briefing, workers are tested for knowledge of the instructions.
Knowledge testing is carried out in the commission of the organization or division of the organization, the composition of the commission is determined by the order of the organization. Knowledge testing procedures, registration of knowledge testing results are carried out in the manner established by the organization. A worker who has successfully passed the knowledge test is issued a certificate for the right to work independently.
Workers are periodically tested for knowledge of production instructions and / or instructions for specific professions at least once every 12 months.
Before testing knowledge, classes, lectures, seminars, consultations are organized.
Extraordinary examination of knowledge is carried out:
- when moving to another organization;
- in case of changes in production instructions and / or instructions for specific professions;
- by order of officials of the territorial bodies of the Federal Service for Ecological, Technological and Nuclear Supervision in the performance of their official duties in cases of revealing insufficient knowledge of the instructions.
In case of a break in work in the specialty for more than 12 months, after testing their knowledge, before being admitted to independent work, they undergo an internship to restore practical skills.
27. Admission to independent work is issued by order of the organization.

Areas of attestation in Rostekhnadzor
APPROVED by order of Rostekhnadzor April 6, 2012 No. 233

BUT. General requirements industrial safety
A.1. Certification of managers and specialists of organizations on the basics of industrial safety
A.2. Certification on the basics of industrial safety for managers and specialists of organizations engaged in the design of hazardous production facilities
A.3. Certification on the basics of industrial safety of managers and specialists of organizations engaged in construction, reconstruction and overhaul, technical re-equipment, conservation and liquidation of hazardous production facilities
A.4. Certification on the basics of industrial safety of managers and specialists of organizations operating lifting structures

B. Special requirements industrial safety
B.1. Industrial safety requirements in the chemical, petrochemical and oil refining industries
B.1.1. Certification of managers and specialists of organizations operating paint and varnish production
B.1.2. Certification of managers and specialists of organizations operating oil refining facilities
B.1.3. Certification of managers and specialists of organizations operating chemical and petrochemical facilities
B.1.4. Certification of managers and specialists of organizations operating facilities using inorganic acids and alkalis
B.1.5. Certification of managers and specialists of organizations operating facilities using chlorine
B.1.6. Certification of managers and specialists of organizations operating the production of mineral fertilizers
B.1.7. Certification of managers and specialists of organizations operating ammonia refrigeration units
B.1.8. Certification of managers and specialists of organizations operating oil products supply facilities (oil depots, oil product warehouses)
B.1.9. Certification of managers and specialists of organizations operating gas processing plants and industries
B.1.10. Certification of managers and specialists of power industry organizations operating petrochemical facilities
B.1.11. Certification of managers and specialists of organizations engaged in the design of chemical industry facilities
B.1.12. Certification of managers and specialists of organizations engaged in the design of chemical and petrochemical industry facilities
B.1.13. Certification of managers and specialists of organizations engaged in the design of oil refining industry facilities
B.1.14. Certification of managers and specialists of organizations engaged in the construction, reconstruction, overhaul of chemical industry facilities
B.1.15. Certification of managers and specialists of organizations engaged in the construction, reconstruction, overhaul of chemical and petrochemical industry facilities
B.1.16. Certification of managers and specialists of organizations engaged in construction, reconstruction, overhaul of oil refining industry facilities
B.1.17. Certification of managers and specialists on the procedure for safe repair work at chemical, petrochemical and oil refining hazardous production facilities
B.1.18. Certification of managers and specialists in organizing the safe conduct of hot work at explosive and fire hazardous facilities
B.1.19. Certification of managers and specialists of organizations for the organization of safe gas hazardous work
B.1.20. Certification of managers and specialists of organizations operating smoke and ventilation industrial pipes
B.1.21. Certification of managers and specialists of organizations operating technological pipelines
B.1.22. Certification of managers and specialists of organizations operating compressor units with reciprocating compressors operating on explosive and harmful gases
B.1.23. Certification of managers and specialists of organizations operating stationary compressor units, air pipelines and gas pipelines
B.1.24. Certification of managers and specialists of organizations operating flare installations
B.1.25. Certification of managers and specialists of organizations engaged in the production of hydrogen by water electrolysis
B.1.26. Certification of managers and specialists of organizations related to the production and consumption of air separation products

B.2. Industrial safety requirements in the oil and gas industry.
B.2.2. Certification of managers and specialists of organizations engaged in the repair of oil and gas wells
B.2.3. Certification of managers and specialists of organizations designing oil and gas production facilities
B.2.4. Certification of managers and specialists of organizations carrying out repair, installation and commissioning work at hazardous oil and gas production facilities
B.2.5. Certification of managers and specialists of organizations engaged in the development of oil and gas fields on the continental shelf
B.2.6. Certification of managers and specialists of organizations engaged in the construction of oil and gas wells
B.2.7. Certification of managers and specialists of organizations operating oil trunk pipelines and oil product pipelines
B.2.8. Certification of managers and specialists of organizations operating gas pipelines
B.2.9. Certification of managers and specialists of organizations operating main pipelines for the transportation of liquid ammonia
B.2.10. Certification of managers and specialists of organizations operating oilfield pipelines for oil and gas transportation
B.2.11. Certification of managers and specialists of organizations engaged in the production, storage and distribution of liquefied natural gas at gas distribution stations MG and CNG filling stations
B.2.12. Certification of managers and specialists of organizations operating underground gas storage facilities in porous reservoirs
B.2.13. Certification of managers and specialists of organizations engaged in the design, construction, reconstruction and overhaul of oil and gas industry facilities
B.2.14. Certification of managers and specialists of organizations operating technological pipelines
B.2.15. Certification of managers and specialists of organizations operating compressor units with reciprocating compressors operating on explosive and harmful gases
B.2.16. Certification of managers and specialists of organizations operating stationary compressor units, air pipelines and gas pipelines
B.2.17. Certification of managers and specialists of organizations operating flare installations

B.3. Industrial safety requirements in the metallurgical industry
B.3.1. Certification of managers and specialists of organizations with foundries of ferrous and non-ferrous metals
B.3.2. Certification of managers and specialists of organizations with copper-nickel production
B.3.3. Certification of managers and specialists of organizations with coke production
B.3.4. Certification of managers and specialists of organizations producing primary aluminum
B.3.5. Certification of managers and specialists of organizations producing rare, noble and other non-ferrous metals
B.3.6. Certification of managers and specialists of steelmaking organizations
B.3.7. Certification of managers and specialists of ferroalloy production organizations
B.3.8. Certification of managers and specialists of organizations with a full metallurgical cycle
B.3.9. Certification of managers and specialists of organizations engaged in the design of objects of the metallurgical industry
B.3.10. Certification of managers and specialists of organizations engaged in the construction, reconstruction, overhaul of metallurgical industry facilities
B.3.11. Certification of managers and specialists of organizations operating smoke and ventilation industrial pipes
B.3.12. Certification of managers and specialists of organizations operating technological pipelines
B.3.13. Certification of managers and specialists of organizations related to the production and consumption of air separation products

B.4. Industrial safety requirements in the mining industry
B.4.1. Certification in the field of industrial safety of managers and specialists of organizations engaged in crushing, sorting, enrichment of minerals and agglomeration of ores and concentrates
B.4.2. Certification in the field of industrial safety of managers and specialists of organizations engaged in the construction, reconstruction, overhaul of underground structures
B.4.3. Certification in the field of industrial safety of managers and specialists of organizations engaged in the development of mineral deposits in an open way
B.4.4. Certification in the field of industrial safety of managers and specialists of organizations engaged in the development of ore, non-metallic and alluvial mineral deposits by underground mining
B.4.5. Certification of managers and specialists of organizations engaged in the design of mining facilities
B.4.6. Certification of managers and specialists of organizations engaged in the construction, reconstruction, overhaul of mining facilities

B.5. Industrial safety requirements in the coal industry
B.5.1. Certification of managers and specialists of organizations engaged in the development of coal deposits by open pit
B.5.2. Certification of managers and specialists of organizations engaged in enrichment and briquetting of coal (shale)
B.5.3. Certification of managers and specialists of organizations engaged in the development of coal deposits by the underground method

B.6. Requirements for rational use and protection of subsoil
B.6.1. Certification in the field of mine surveying ensuring the safe conduct of mining operations for managers and specialists of organizations carrying out work related to the use of subsoil and their design
B.6.2. Certification in the field of mine surveying ensuring the safe conduct of mining operations for managers and specialists of organizations engaged in the use of subsoil for purposes not related to the extraction of minerals, as well as the construction and operation of hydraulic structures
B.6.3. Certification in the field of mine surveying for the safe conduct of mining operations for managers and specialists of organizations engaged in the development of ore and non-metallic mineral deposits
B.6.4. Certification in the field of mine surveying to ensure the safe conduct of mining operations for managers and specialists of organizations engaged in the development of plate mineral deposits
B.6.5. Certification in the field of mine surveying to ensure the safe conduct of mining operations for managers and specialists of organizations engaged in the development of deposits of hydrocarbon raw materials and hydro-mineral resources

B.7. Industrial safety requirements at gas distribution and gas consumption facilities.
B.7.1. Certification of managers and specialists of organizations responsible for ensuring safety during the operation of gas distribution and gas consumption systems
B.7.2. Certification of managers and specialists of organizations operating facilities using liquefied hydrocarbon gases
B.7.3. Certification of managers and specialists of organizations for industrial safety in the operation of automobile filling stations of liquefied hydrocarbon gas
B.7.4. Certification of managers and specialists of organizations operating gas distribution and gas consumption systems
B.7.5. Certification of managers and specialists of organizations responsible for conducting technical supervision for the design and construction of gas distribution and gas consumption systems
B.7.6. Certification of managers and specialists of organizations engaged in the design of gas distribution and gas consumption facilities
B.7.7. Certification of managers and specialists of organizations engaged in construction, reconstruction, overhaul of gas distribution and gas consumption facilities

B.8. Industrial safety requirements for pressure equipment.
B.8.1. Certification of managers and specialists of organizations engaged in the design of steam and hot water boilers
B.8.2. Certification of managers and specialists of organizations engaged in the design of electric boilers and electric boiler rooms
B.8.3 Certification of managers and specialists of organizations engaged in the design of pressure vessels
B.8.4. Certification of managers and specialists of organizations engaged in the design of steam and hot water pipelines
B.8.5. Certification of managers and specialists of organizations engaged in the manufacture, installation, commissioning and repair of steam and hot water boilers
B.8.6. Certification of managers and specialists of organizations engaged in the manufacture, installation, commissioning and repair of electric boilers and electric boilers
B.8.7. Certification of managers and specialists of organizations engaged in installation, repair, manufacture and adjustment of pressure vessels
B.8.8. Certification of managers and specialists of organizations engaged in the installation, repair, manufacture and adjustment of steam and hot water pipelines
B.8.9. Certification of members of certification commissions of organizations operating steam and hot water boilers
B.8.10. Certification of members of certification commissions of organizations operating electric boilers and electric boilers
B.8.11. Certification of members of certification commissions of organizations operating pressure vessels
B.8.12. Certification of members of certification commissions of organizations operating steam and hot water pipelines
B.8.13. Certification of persons responsible for the implementation of production control over compliance with industrial safety requirements during the operation of pressure vessels
B.8.14. Certification of persons responsible for the good condition and safe operation of steam and hot water boilers
B.8.15 Certification of persons responsible for the good condition and safe operation of electric boilers and electric boilers
B.8.16. Certification of persons responsible for the good condition and safe operation of pressure vessels
B.8.17. Certification of persons responsible for the good condition and safe operation of steam and hot water pipelines
B.8.18. Certification of managers and specialists of organizations engaged in the design of facilities, project documentation which involves the use of pressure equipment
B.8.19. Certification of managers and specialists of organizations engaged in the construction, reconstruction, overhaul of facilities, the design documentation of which provides for the use of pressure equipment
B.8.20. Certification of managers and specialists of organizations operating smoke and ventilation industrial pipes

B.9. Industrial safety requirements for lifting structures.
B.9.1. Certification of managers and specialists responsible for safe production works with cranes
B.9.2. Certification of managers and specialists responsible for the maintenance of cranes in good condition
B.9.3. Certification of managers and specialists responsible for supervising the safe operation of cranes
B.9.4. Certification of members of certification commissions of organizations operating cranes
B.9.5. Certification of managers and specialists of organizations operating elevators
(The certification area was canceled by order 122 of Rostekhnadzor dated March 27, 2013)
B.9.6. Certification of members of certification commissions of organizations operating lifts (towers)
B.9.7. Industrial safety certification of specialists in supervision of the safe operation of lifts (towers)
B.9.8. Industrial safety certification of specialists responsible for maintaining lifts (towers) in good condition
B.9.9. Certification for industrial safety of persons responsible for the safe performance of work with lifts (towers)
B.9.10. Certification of specialists of organizations responsible for the safe performance of work by pipe-laying cranes
B.9.11. Certification of specialists of organizations for supervision of the safe operation of pipe-laying cranes
B.9.12. Certification of specialists of organizations responsible for maintaining pipe-laying cranes in good condition
B.9.13. Certification of members of certification commissions of organizations operating pipe-laying cranes
B.9.14. Certification of specialists of organizations for supervision of the safe operation of load-lifting cranes
B.9.15. Certification of specialists of organizations responsible for maintaining load-lifting cranes-manipulators in good condition
B.9.16. Certification of specialists of organizations responsible for the safe performance of work by load-lifting cranes-manipulators
B.9.17. Certification of members of certification commissions of organizations operating loader cranes
B.9.18. Certification of specialists in supervision of the safe operation of construction hoists
B.9.19. Certification of specialists responsible for maintaining construction hoists in good condition
B.9.20. Certification of persons responsible for the safe performance of work by construction hoists
B.9.21. Certification of members of certification commissions of organizations operating construction hoists
B.9.22. Certification of specialists of organizations for the supervision of the safe operation of escalators
B.9.23. Certification of members of certification commissions of organizations operating escalators
B.9.24. Certification of members of certification commissions of organizations operating lifting platforms for the disabled
B.9.25. Certification of persons responsible for organizing work on maintenance and repair of lifting platforms for the disabled
B.9.26. Certification of persons responsible for the organization safe operation lifting platforms for the disabled
B.9.27. Certification in the field of industrial safety of managers and specialists of the cable car
B.9.28. Certification in the field of industrial safety of the chiefs of ropeways
B.9.29. Certification of managers and specialists of organizations engaged in the design of facilities, the design documentation of which provides for the use of permanently installed lifting mechanisms, escalators, cable cars, funiculars
B.9.30. Certification of managers and specialists of organizations engaged in the construction, reconstruction, overhaul of facilities, the design documentation of which provides for the use of permanently installed lifting mechanisms, escalators, cable cars, funiculars

B.10. Industrial safety requirements for the transportation of hazardous substances.
B.10.1. Certification of managers and specialists responsible for safety during the transportation of hazardous substances at hazardous production facilities
B.11. Industrial safety requirements for storage and processing of plant raw materials.
B.11.1. Certification of managers and specialists of organizations operating storage and processing facilities of plant raw materials

B.12. Industrial safety requirements for blasting.
B.12.1. Certification of managers and specialists of organizations that carry out explosive work in underground workings and on the surface of mines (objects of the mining and non-metallic industry), coal and shale mines hazardous (not hazardous) in terms of gas or dust. Special blasting
B.12.2. Certification of managers and specialists of organizations carrying out blasting operations in open-pit mining and special blasting operations

B. Environmental safety requirements.

D. Energy security requirements.
D.1. Safety requirements for electrical installations of consumers.
D 1.1. Certification of managers and specialists of organizations operating electrical installations

D.2. Safety requirements for thermal power plants and thermal networks.
D.2.1. Certification of managers and specialists of organizations operating thermal power plants and heating networks

D.3. Safety requirements for power stations and networks.
D.3.1. Certification of managers and specialists of organizations operating thermal power plants
D.3.2. Certification of managers and specialists of organizations operating electrical networks

D. Safety requirements for hydraulic structures.
D.1. Certification of managers and specialists of organizations in the field of safety of hydraulic structures of industrial facilities
D 2. Certification of managers and specialists of organizations in the field of safety of hydraulic structures of energy facilities
D.3. Certification of managers and specialists of organizations in the field of safety of hydraulic structures of water management facilities
D.4. Certification of managers and specialists of expert organizations that carry out examination of declarations of safety of hydraulic structures