Instructions for signaling mongoose. Alarm Mongoose - a detailed overview and instruction manual. According to the given instructions

The statistics are relentless. The number of stolen cars continues to grow. What should a car enthusiast do? Put your vehicle in a garage and lock it up with a few locks, or limit yourself to installing a reliable security system? The second option, of course, wins, but only if we are talking about effective protection. Alarm Mongoose will allow the owner of the car to gain confidence in the safety of his movable property and give him additional comfort.

Briefly about efficiency

The desire of the manufacturer of car alarms Mongoose: to do better than it is, can be seen in everything, including the approach to building an impenetrable outpost that can repel any “attacks” from intruders.

Behind a high degree protection meets three components of success, namely:

1. Radio command code protection. Interception is eliminated thanks to the KeeLoq technology (block cipher coding), used by the developers of Mongoose brand systems as the main anti-theft tool. The principle of operation of the Flashpoint, Leopard, Jaguar, Alligator and other popular brands of alarms is built on the same technology, but it is not supported by two more auxiliary security options.
2. Antiscan. An additional function, the installation of which is not required (it is initially built into the system). Its main task is to prevent the possibility of random selection of the desired code and to stop the attempt of intruders to hack the Mongoose alarm by sequentially eliminating incorrect combinations and searching for the only correct one.
3. State memory. This auxiliary option is aimed at preventing an attempt to steal a car with a simple physical action, namely, removing the terminals from battery. In theory, after that, the security mode is automatically turned off, but not on Mongoose alarms. The installation wizard or one of the owner's manuals will warn the vehicle owner that the similar situation an alarm will sound, and the engine will remain blocked (just in case).

A little about functionality

The old models (for example, Mongoose Imperium M5000), which require a standard immobilizer for 100% protection, have been replaced by new products that can independently provide both unprecedented security and two-way communication (Mongoose Base 20, Mongoose 600, Digital 100, Mongoose lq 200 and others).

Mongoose alarms of the modern line offer the user the most convenient and thoughtful set of options, namely:

1. Silent guard mode. In this case, only light signals and a pager message will alert you of an attempted hijacking (sound is disabled).
2. Stay Arm Mode. The alarm will not turn on protection immediately after pressing the corresponding buttons, but only after the trunk and doors are closed.
3. Automatic engine start. Systems with auto start Mongoose will turn on the engine according to pre-set parameters (when certain temperature, at a specific time set by the alarm clock or timer).
4. Anti-Hi-Jack mode (active, passive). Enabling this option blocks the motor while driving (this process is controlled by the owner, the mode is activated by the key fob buttons when trying to steal).
5. Emergency shutdown. This mode allows you to remove protection from the car using a special PIN code, even if the car cannot be opened from the alarm key fob or in a situation where the control panel has been lost by the car owner.

This is just a small part useful features. In fact, each specific alarm model, released under the Mongoose brand, has much more features in its arsenal.

Complete set and installation

The basic set of mongoose signaling components without fail includes all the elements necessary for its installation, regardless of how it is planned to hold this event (independently or with the help of specialists) and on which car a particular model will be installed (for example, TT - 2 on VAZ 2110, Two Way on Kalina or ls7000d on prior 2).

As a rule, the following parts are provided in the kit:

• central control unit(the main device that coordinates the interconnection of all other components);
• module (responsible for receiving and transmitting information);
• Valet switch(required for emergency shutdown protection mode, which allows you to bind a key fob, or reprogram it if necessary);
• shock sensor (responding with an alarm signal to impacts on the car of various strengths);
• LED indicators(serving to display information about the status of the alarm mongoose);
• engine lock relay(responding by stopping the motor to a command transmitted from the key fob);
• installation set of wires(necessary for the connection of the elements with each other and their nutrition);
• two key fobs (one main, equipped with a convenient interface with 2 or more buttons, with a maximum of 5 buttons, the second additional, serving as a backup in case of loss or failure of the first one);
• user manual(the one in which you can find a detailed alarm connection diagram and get answers to any questions regarding the installation, programming and operation of the security system of this brand).

Connection and setup

The car enthusiast always has questions. For example, will the proximity of two devices affect their performance (43392mnz - X1G state grant), will the brand of the car become an obstacle to installing the selected alarm model (Toyota Camry - Starlin E93) and many others. When it comes to Mongoose alarms, the car owner may be interested in only 2 questions, namely:

1. How to tie a keychain? The exact algorithm of actions can be found in the user manual. As a rule, this action is quite simple to perform. Help for the car enthusiast step-by-step instruction(on the example of Mongoose amg 700) :
   • Step 1. Turn on the ignition (after 5 seconds, press the Valet button - emergency shutdown). The system will notify you that it is ready for programming with 2 short beeps and 1 light signal.
   • Step 2. Press button 1 on the key fob. 2 short beeps will sound, then 1 more short beep, confirming the activation of the control panel.
   • Step 3. Repeat action number 2 (step 2) for all key fobs (the alarm can work with 4 remote controls).
   • Step 4. We wait 10 seconds (the system exits the programming mode).
2. What to do in case of breakdown? Mongoose alarms are not perfect. The system may simply stop responding to key fob commands. A logical question arises: how to disable on the machine security mode without PU. The answer is unequivocal: only by strictly following the instructions, each model assumes its own way of unlocking, it is not possible to bring a universal algorithm.

But what if the documents are lost, the identification marks are erased, and the exact name installed system protection has completely evaporated from the memory of the owner of the machine (or was it installed by the previous owner), how to find out the alarm model in this case? Where to look for help?

Everything is simple here, no need to dig deep. Special knowledge, the study of the key fob circuit and other details of the system and its components can be left to professionals. For a motorist, it is enough to carefully look at your key fob, open the Internet and compare the pictures that appeared on the screen based on the results of the query: “identify the alarm by key fob” with the original. Usually there are no problems with identification.

Mongoose alarms are a great opportunity protect your car with comfort and at an affordable price. Should I miss this chance and spend time looking for other more attractive options? More likely no than yes!

Mongoose branded security systems are equipped with several types of transmitters. Using the alarm instruction Mongoose with a key fob for 3 buttons, as well as for 2, 4 and 5, the owner can control the functions and modes of operation.

[ Hide ]

Specifications

IN security systems ah Mongoose to encode signals between control devices and the receiver uses an analog modulation protocol.

Main system parameters:

• supply voltage processor unit- 9-15 V;
• current strength during protection - no more than 20 mA;
• control frequency range - 433.92 MHz;
• temperature range uninterrupted operation— from -40 ºС to +85 ºС;
• distance of receiving signals from the key fob (old models) - no more than 30 m;
• signal receiving distance two-way communication— up to 1000 m;
• pager operation distance - up to 2000 m.

The system blocks are designed for switching and current transmission:

• start and ignition blocking - 30 A;
• autostart supply circuits - 30 A;
• external alarm parking lights or direction indicators - 10 A;
• control circuit for lock drives or central locking unit - 15 A (old models) and 300 mA (modern);
• additional channels - no higher than 300 mA.

Keyfob characteristics

Depending on the alarm model, the characteristics of the control panels are somewhat different.

With 2 buttons

The control device has an oval-shaped plastic housing, consisting of two halves connected by a screw. On the outside of the key fob there are two unmarked buttons and a red indicator diode that works when sending commands. A 23 A battery with an operating voltage of 12 V is installed inside the remote control. The battery life is up to one year of operation (depending on the intensity and conditions of use, as well as on the quality of the battery itself). Signaling has a simple encoding method. Remotes of this type are included in the delivery of Mongoose 750.

The modern version of the Mongoose alarm with a two-button remote control is the model 600 system. The control device is powered by two 3 V CR2016 batteries. There is a diode on the remote control case that turns on when commands are transmitted. The signals are encrypted using an analog algorithm that changes the command each time the button is pressed.

with 3 buttons

The three-button key fob includes the Model 800 control unit, which has an elongated plastic body. Models 700 and 800 currently on the market are equipped with remotes with CR2016 batteries (two per remote).

With 4 buttons

The Mongoose 770 complex is equipped with four-button remote controls. modern alarms such a key fob is available as part of the 900 system. The body of the device is based on the design of the product with two buttons, it is distinguished by an additional pair of holes in the middle part. The battery and the encoding method are similar.

The B001 and B003 complexes are equipped with liquid crystal displays and operate in a two-way mode. AAA standard battery (1.5 V) is used as a current source.

with 5 buttons

Used in Mongoose 1.9 EMS and Mongoose Boomerang Premium systems. The remote control refers to products with two-way communication. The spare control device has a unidirectional operation scheme and is equipped with two buttons. In fact, the remote control is identical to the Mongoose 750 alarm devices. feedback when an alarm is triggered or when the S key is pressed. AM modulation is used to encode the signal, providing improved signal protection.

How to register the Mongoose alarm keychain is described in the video from the Ivan Chernov channel.

Equipment

The standard delivery set of Mongoose systems includes:

• basic electronic unit;
• siren;
• impact sensor with two levels of force detection;
• harnesses with connectors;
• two identical control panels (or one double-sided, and the second one-sided);
• diode for status indication;
• a button to perform a shutdown in case of an emergency;
• mounting products;
• limit switch (1-2, depending on the model);
• installation documentation and setup guide.

As an additional equipment for some models, a volume sensor (with two steps) is included, which allows you to track movement in the car and nearby.

Key Features

Mongoose security systems provide the owner with the following features:

• switching on and off the system without supply sound signals;
• customizable automatic arming mode;
• work according to data from the sensor for determining the impact on the vehicle;
• activation of alarm according to data from an additional sensor;
• signal encoding with counteraction to the operation of scanners and grabbers;
• built-in system of control over false positives;
• automatic bypass of faulty zones;
• it is possible to shutdown the system in two stages;
• built-in memory for several operations (usually four);
• control of additional devices is possible;
• adjustable pulse of work with central locking;
• possibility of using additional devices management;
• manual control of standard central locking;
• power-off state memory.

The capabilities of the Mongoose systems depend on the model, some of the functions listed above may be missing in some signaling systems.

Advantages and disadvantages

Based on feedback from users of Mongoose security systems, we can distinguish positive sides systems:

• low cost;
• opportunity to work with various types locking drives;
• shock sensor has a wide adjustment range;
• small sizes of remotes (models with two or three buttons).

At the same time, the owners note a number of negative points:

• most systems lack feedback and automatic engine start;
• high power consumption of key fobs with feedback;
• problems with performance during a voltage drop on the on-board network and low air temperature;
• poorly readable display and dim backlight (models with a five-button key fob).

How to install?

When installing Mongoose systems, you must adhere to the rules:

1. Before starting the installation, disconnect the battery from the on-board network (remove the terminals).
2. The signaling unit, containing the control processor and distribution relays, is installed inside the car in a hard-to-reach place, isolated from sources of heat and moisture.
3. The antenna of the radio receiver module is located at the highest possible height. The receiver is installed on windshield, away from metal parts bodywork and wiring harnesses. The manufacturer does not recommend making changes to the design of the device and changing the length of the standard wire, as this causes a drop in the range of the control panels.
4. The siren is mounted in a place inaccessible to an attacker. The standard installation location is the engine compartment, the device is placed on the engine shield or mudguards with the mouthpiece down. The location must ensure that the device is protected from flooding and overheating.
5. If you plan to use a self-powered siren, then you need to provide access to the lock cylinder, which is used to turn off the device.
6. The installation locations of the signal interrupters (limit switches) of the trunk and hood covers are located at points that provide maximum protection from moisture. It is forbidden to install devices in the drain channels, since in this case the operation of the limit switch is disrupted and it becomes possible for moisture to enter the internal cavities of the body.
7. The shock sensor is placed only inside the passenger compartment, closer to the longitudinal axis (to ensure uniform susceptibility to shocks). The device must be placed on metal body panels and firmly fixed with self-tapping screws or adhesive tape. Rigid installation reduces the possibility of false signals from the sensor and provides protection vehicle.
8. Power supply wires of the system and outputs to the actuators are protected by fuses designed to work with currents of the appropriate strength.
9. Wire connections must provide reliable contact.
10. The negative terminals of the harnesses are attached to the mass bolts and nuts on the car body.
11. Wire connections must be insulated with tape or heat shrink tubing.

User manual

Knowledge of the general provisions of the alarm instructions Mongoose with a key fob for 3 buttons, 2, 4 and 5 allows the owner to independently program the complex. Using the control panels, the user turns on and off the main functions of the systems, and can also check the status of the alarm.

Designation of buttons and symbols on the keychain

Depending on the type, the alarm is equipped with various key fobs. Devices can have from two to five buttons, an indicator diode or a liquid crystal display.

With 2 buttons

Keychain with 2 buttons

The first button has a lock icon with a closed shackle, the second one has an open shackle. When working, single and sequential keystrokes are used. In sequential operation, the pause between pressing should be in the range of 0.5-2 seconds.

With 3 buttons

A diode is installed at the top, below it there are two rows of buttons. The first button has a different color than the others.

Model 800 key fob with three buttons

When sequentially working with buttons, an interval between pressings of no more than three seconds is allowed.

With 4 buttons

Keychain with 4 buttons for model 900

Button assignment.

Another type of four-button key fob is the control devices for the B001 and B003 complexes, photos of the products are presented below.

Designation of keychain icons Mongoose 1.9 EMS

The display contains status icons:

1. The system is in vehicle protection state.
2. Protection disabled.
3. status icon door locks(open or closed). There is a switching shackle segment that determines the status.
4. Sending a command.
5. Forced block of remote control keys to protect against accidental keystrokes.
6. Saving battery power.
7. Starting the motor at intervals.
8. Starting the motor when the temperature threshold is reached.
9. Daily start of the motor at a certain time.
10. The power unit is in working condition.
11. Settings.
12. Testing.
13. Parking.
14. Ignition support included.
15. Activation of the first and second zones of the shock sensor.
16. The doors are open.
17. The hood is not locked.
18. Luggage compartment lid not latched.
19. Anti-robbery.
20. Field for indication of the current time.
21. Low battery indication.

The Mongoose Boomerang Premium system is equipped with an improved version of the key fob with five buttons. Each time you use the keys, the on-screen command icon turns on, with which you can control the operation of the system.

Keychain Boomerang Premium

The assignment of the buttons repeats the four-button remote control, the fifth key is used for backlighting, as well as turning on the vibrating alert and changing the notification melody. The color display has similar icons that display the operating modes and the status of the body elements.

Keyfob programming

Mongoose alarms have the ability to reprogram existing control devices.

Mongoose 750 and 770

The procedure for flashing remotes to Mongoose 750 or 770:

1. Disable the security, then activate the ignition.
2. Enter your individual code. After entering, turn off / turn on the ignition system. If it consists of two numbers, then the second number is entered and the ignition manipulation is repeated. If the code is unambiguous, you must immediately go to the next step.
3. Wait for the response signal (two beeps by the siren) from the complex, confirming the correctness of the code and the readiness to write the remotes to the memory.
4. Memorize the first key fob by acting on the first key. The entry is confirmed by a short beep.
5. Insert the second keychain in the same way. The system memory can be used for up to four devices.
6. Turn off the ignition circuit, then press the emergency deactivation key (or pause for 15 seconds, during which no manipulation of the alarm can be performed). When exiting to normal operation, a double beep will sound.

Some alarm models Mongoose at the beginning of the procedure delete all previously programmed remotes. After recording new key fobs, it is recommended to check the operability of the old ones.

Mongoose 700 and 800

To flash the alarm remote control:

1. After switching on the ignition, press the emergency deactivation button 5 times within 10 seconds.
2. After giving a long beep, press any key on the programmable remote control. The entry will be confirmed by a short beep, a double beep will be given for the second remote control, etc. A total of four devices can be registered.
3. Switch off the ignition and pause for ten seconds. After that, a double long beep should go off, indicating the end of the procedure.

If on the main signaling unit Mongoose 700 and 800 the remote programming service with a code request is connected, then the procedure looks like this:

1. Switch the ignition on, off and on again.
2. Within ten seconds, press the emergency deactivation button to enter the first number of the code.
3. Switch the ignition system off and on again.
4. Enter the second digit (according to a similar scheme).
5. Repeat point 3.
6. Wait for a long beep to confirm the correct password entry. After that, within ten seconds, drown the shutdown button three times.
7. Wait for a long beep (should be given within two seconds).
8. Press any button on the first remote control. Confirmation takes place by analogy with recording remotes without a code.
9. Exit the setting by turning off the ignition. Ten seconds later, the siren will give two long beeps.

Boomerang Premier

Recording to Boomerang Premier key fobs is done as follows:

1. Turn on the ignition, then within five seconds, press the emergency shutdown five times.
2. After receiving a sound confirmation, press the buttons 01 and 02 of the programmable remote control. The entry is confirmed by a beep.
3. Record the rest of the remotes in the same way.

Autorun settings

The automatic engine start function is equipped with several later models of Mongoose alarms. One of the systems is EMS 1.9 equipped with feedback.

Starting in automatic mode can be performed according to four schemes (at the request of the owner):

• one time;
• at a certain time (with daily repetition);
• periodically (in accordance with the algorithm laid down by the owner);
• periodically, depending on the temperature and the set repeat program.

Before using automatic remote start the owner must follow the safety rules:

• the car is in an open area with good ventilation;
• spontaneous start of movement is excluded (the gear levers are in the neutral or parking position);
• the vehicle is filled with fuel and process fluids;
• starting is carried out by people trained in the operation of the autostart system.

When configuring autorun, you need to set the following parameters:

• type of gearbox (mechanics or automatic);
• engine type (positive ignition or compression ignition);
• the need to turn on the turbo timer;
• If the vehicle is equipped with a clutch start system, the programmable output must be set accordingly.

For the correct operation of the procedure auto start on cars with a manual transmission, it is required to programmatically set the value of the neutral position of the shift lever:

1. After stopping, set the parking brake to working position. At the same time, the engine must be running and all moving parts of the body must be locked.
2. After the limit switch is triggered, automatic switch on ignition support protocol. After that, you can turn and remove the key from the lock. The power unit should continue to work.
3. Exit the salon and close everything open elements bodies equipped with limit switches.
4. When the guard is turned on, the engine should stop, except in the case of an activated turbo timer. If the alarm is not turned on, the engine will run for one minute and then stall (or according to the turbo timer setting). On systems B001 and B003, the engine runs for two minutes.
5. The completed procedure is necessary for remote start of the motor. If a limit switch or an alarm is triggered from this point on, the procedure will be canceled and the automatic start will not be activated. The only exception is the manipulation of the trunk lock connected via an additional channel.

Systems B001 and B003 allow you to make redundancy in two more ways:

1. You must first activate the automatic backup procedure (when installing the system). After stopping the car, the gear lever is moved to the neutral position.
2. Turn off the ignition, the engine will continue to work, the locks will automatically unlock.
3. Not later than two minutes after turning off the ignition, the owner must leave the passenger compartment. After closing the door, the motor will stop (unless the turbo timer is enabled).

Alternative method without using the parking brake limit switch:

1. After setting the lever to the neutral position, press 02 on the remote control. The button is held for two seconds until a single beep and flash is given, which indicate the inclusion of the ignition support system.
2. Then you should leave the salon within two minutes. The engine stops immediately after the door is closed or the turbo timer has expired. If the procedure is correct, the redundancy success icon turns on on the display, if there is an error, the automatic start inhibit indicator.

The programming of the Mongoose remote control is presented in a video shot by the author Alexey Poluboyarinov.

Autostart activation

A one-time start is performed manually by a command transmitted by the remote control. The condition is the presence of a stable connection between the transmitter of the remote control and the antenna receiver in the car, as well as the active security mode.

From the keychain

Launch algorithm:

1. Press and release the M key, and then 1. The interval between presses should not exceed three seconds.
2. Ignition support will turn on, the starter will scroll crankshaft. A total of three start attempts are possible. If the start is successful, the ignition, start and running engine icons are activated on the screen. The duration of the engine operation is programmed. In case of an unscheduled stop earlier than the set time, the alarm will attempt to restart.

Modern complexes B001 and B003 have a slightly different starting procedure from the key fob:

1. To start, press 02 on the main remote control or 04 on the additional one (for two seconds).
2. When the guard is turned off, it will be turned on, and then an attempt will be made to start. A total of three launch attempts are possible. If the start is successful, the corresponding icon will light up on the key fob screen, indicating the operation of the engine. In place of the clock, a timer will start showing the remaining operating time. The system allows you to select two time options - 15 or 25 minutes.
3. To stop, press the same buttons.

By time

Timed start with daily repeat:

1. Start tuning by simultaneously pressing the M and S keys located on the end of the remote control. After that, the field for displaying the time should turn on in a blinking mode (only the part that is responsible for indicating the number of hours).
2. You can change the hour value using buttons 1 or 2 (adds or decreases the value, respectively).
3. Use button 3 to move to the part of the field that displays minutes.
4. expose required amount minutes.
5. Use button 3 again to confirm the set value.
6. The buzzer will turn on in the melody mode, which indicates the success of the procedure.

1. Press and hold 01 and 03 until beep (approx. 4 seconds).
2. Use 01 and 02 to set the hours and minutes, respectively. After setting the time, simultaneously hold down the buttons 01 and 03 until the signal. The screen should display the current time.
3. Hold down the buttons 01 and 03 for two seconds, which will turn on the start by time. The corresponding icon will light up on the screen, and a single light and sound signal will be given.
4. The start will be performed at the programmed time if no alarm has occurred. When the procedure is canceled, the key fob will receive a signal that includes the start inhibit icon.

Periodically repeating start is configured by various combinations of buttons:

1. Press and hold down the third button for three seconds. Wait for a triple beep and a single working out of the emergency gang.
2. Select the operating time of the power unit in accordance with the attached table.
3. Repeat the first step to proceed to interval programming.
4. Set the required time according to the table.
5. Repeat step #1 to exit setup. The exit is confirmed by a single beep and a flash of lamps.
6. The start procedure is activated when active protection by double pressing the third button. The interval between pressing is no more than three seconds. When the mode is active, the indication icon periodically turns on on the screen.

Periodic start on B001 and B003 is activated in steps:

1. Select the snooze interval (1, 2, 3 or 4 hours) using system programming.
2. Arm, and then hold simultaneously two seconds 02 and 04 on the main console. The corresponding icon should appear on the display.
3. After starting the motor, repetitions will be made in accordance with the program. When an alarm is triggered, the restart is canceled and the start inhibit icon turns on on the screen.

By temperature

Triggering on thermometer data:

1. Enter the setting (similar to the restart).
2. Select the warm-up time according to the above procedure and using the table data.
3. Press the M key for three seconds.

Start B001 and B003 by temperature:

1. Assign the repetition frequency and set the temperature value at which the motor starts.
2. After arming, press buttons 02 and 03 for two seconds. Start activation is indicated by an icon on the screen. The start will be made when the temperature in the cabin drops below the programmed one at regular intervals. If by this moment the temperature value is higher, then the system switches to the mode of tracking its value. If it falls below the threshold, the engine will start and warm up, after which the frequency control will turn on again. Information about the launch parameters is transmitted to the key fob only when the call function is connected.

How to turn off the alarm?

Moongoose systems have a built-in emergency shutdown function, which is used when the buttons of the standard key fob break, the battery or internal circuits fail, and also when the remote control is lost. Shutdown procedure for different models has differences.

Mongoose 750 or 770

To turn off the signaling Mongoose 750 or 770 in emergency mode the owner must:

1. Open the driver's door with the factory key. After opening, the system will work in alarm mode, giving sound and light signals.
2. Sit in the driver's seat, turn the key in the ignition switch to the "on" position and leave it in this position.
3. When using an unambiguous password, it is entered by pressing a special emergency deactivation button. After entering the code, you need to turn the key to the "off" point. If the input is correct, the alarm and the alarm in general will be deactivated.
4. If the owner uses a code consisting of two numbers, then after entering the first number and turning off the ignition, it should be reconnected, entered the second number, and then deactivated the ignition system. If the code matches the programmed one, the system will turn off.

Mongoose 750 makes a double error when entering the code - a temporary blocking of repeated entry attempts (for two minutes) is turned on.

Mongoose 400 Base

Disabling the 400 Base complex has a different algorithm of actions:

1. After unlocking the car with the key, you need to start the alarm.
2. Over the next seven seconds, it is necessary to repeat the ignition on / off procedure three times. After the third cycle, the ignition should remain active. Check the operation of the alarm by the control diode, which should give out a series of frequent flashes, and then go into a uniform flashing rhythm.
3. After the start of slow flashing, the number of flashes should be counted. When reaching a value equal to the previously programmed individual code, switch off the ignition. The system will be deactivated. The owner should be aware that during the emergency shutdown, light and sound alarms are given.

Mongoose 600

Shutdown Mongoose 600 is performed as follows:

1. Turn on the alarm by opening the door with the standard key.
2. Connect ignition.
3. Find the emergency deactivation button and press it six times. After that, the alarm and signaling as a whole should be turned off.

Mongoose 700, 800 and 900

Alarm Mongoose 700, 800 or 900 is disabled by a single press of the emergency deactivation button. The rest of the steps correspond to system 600.

On systems 700, 800, or 900, with a code request connected, the procedure is:

1. Open the door while the security is on, triggering the alarm.
2. Turn the ignition on, then off and then on again. After that, the alarms will be temporarily disabled for 10 seconds.
3. Within the available ten seconds, enter the first digit of the code (by pressing the emergency key).
4. Switch on and immediately switch off the ignition.
5. For the next ten seconds, enter by pressing emergency button the second digit of the code.
6. Turn off the ignition, immediately after that the alarm will be deactivated and a long confirmation beep will be given by the siren. If the code is entered incorrectly twice, a lock occurs, which automatically turns off after two minutes.

Mongoose B001

The Mongoose B001 complex is protected by a four-digit code, so the shutdown has differences:

1. After opening the door, you need to turn on / off the ignition system four times. The ignition must remain off, the alarm will stop.
2. Wait for the lamps to flash and enter the first number by turning the ignition on and off. No more than six seconds should elapse between the flash and the start of input.
3. Six seconds after entering the first number, the emergency gang should work, confirming the readiness of the alarm to enter the second digit. Enter the second, third and fourth digits in the same way.
4. After recognizing the correct code, the system will flash the lamps twice, disarm and automatically switch to the Valet programming mode. If at least one value fails, an alarm will be triggered. In this case, the code entry starts again. With a triple input error, the system activates a lock for 20 minutes. If you try to enter the code during this period of time, the lock timer starts again.

Download instructions for installing the Mongoose alarm for different models in PDF format

You can download service manuals for setting up and managing Mongoose car alarms using the links:

What is the price?

Video "Mongoose alarm keychain repair"

Repair of the Mongoose remote control is presented in a video from the author Oleg Aryamnov.

The first thing you should never forget about before installing such a security system as the Mongoose alarm is the installation and operating instructions. This the most important document, which comes with all the contents, can only be called "the bible for the alarm installer." They always contain a detailed connection diagram, connection and programming nuances, recommendations, tips, characteristics, functions. It is on it that you need to focus on installation.

So, the first thing to do when installing an alarm is to disconnect the battery and determine the installation location of the main units: a siren, a control unit, a radio with an antenna, sensors, and so on.

According to the given instructions:

• The control unit must be installed in places far from moisture and heat in the cabin;
• The siren is installed in the space under the hood, also away from moisture and places of heating;
• The radio with antenna is mounted as high as possible in order to achieve maximum effect;
• The shock sensor should be tried to be installed closer to the longitudinal axis of the machine;
• Power circuits (lanterns, central locking, etc.) are protected by fuses.

Having determined their presence, we gain courage and, taking into account the recommendations discussed above and independently studied, we proceed to the installation constituent parts security system and their connection.

Mongoose alarm - wiring diagram and installation highlights

Turning to the installation process itself, you should immediately determine the algorithm for such an installation. So, we strongly recommend that you first install all the components of the “signaling” Mongoose (control unit, receiver, sensors, siren), and then only proceed to their connection to each other.

And only after that, connect them to the headlights and turn signals, the central lock, power windows and other mechanisms of the car. Since detailed recommendations for installing the main elements are contained in the instructions for the Mongoose system, we consider it appropriate to skip this step, since every motorist who believes that he can install the alarm on his own will be able to do this without our help. It is more advisable to consider the connection diagram.

So, you probably already found that a lot of multi-colored wires and connectors come out of the main system control unit. Their connection is the most painstaking moment, since the performance of the entire system will depend on it. The Mongoose signaling scheme, according to which the wires should be connected, is also contained in the instruction manual for each model of this security system.

According to the instructions, traditionally the models are connected as follows:

• The brown wire connects to the siren;
• The red wire connects to the lamp relay;
• The white wire connects to the positive terminal of the pager;
• The gray wire is connected to the tailgate, hood or central lock;
• The black and blue wire connects to the trunk opening mechanism;
• The orange wire is connected to the ignition;
• The green wire connects to the driver's door limit switch;
• The yellow wire is connected to the door limit switches;
• The brown-white wire is used for additional blocking of the engine;
• The brown/black wire connects to the door motor;
• Black-green and black-white wires are connected to the turn signals;
• Blue-black wire - an additional channel for programming the trunk lock or a short and long pulse;
• Thick black wires must be connected to breaks in the starter, ignition circuits and further according to the scheme;
• The remaining multi-colored wires are the contacts of the central locking relay, they are connected to the lock actuators installed on the doors.

Please note that the above connection diagram may differ slightly from the diagram established by your instruction manual. In this case, we strongly recommend that you use your instructions.

In order to connect the wires to each other, it is worth using only the terminals, since the old reliable twists do not allow you to be sure of their reliability. In addition, when wiring around the doors, use rubber bushings and bushings - this will help to avoid kinks. All wiring should be carried out in the most dry and hard-to-moisture places, and it should be guided and fastened only with plastic clamps (clips).

Having connected the entire system to the car, the sensors and programming of the parameters and the remote control fob follow, the mechanism for which is described in great detail in the installation instructions and varies significantly depending on the model. In view of this, we will also omit this stage, relying on your attention.

Thus, having listened to our recommendations and instructions, and also having studied Additional information from the instructions and other sources, we are sure that you will be able to mount your security system yourself, after which, the Mongoose alarm will delight you with diligent and trouble-free work for a long time.

Instruments

• Multimeter (it is important to be able to use it);
• Additional wires, since the length of the contacts included in the kit may not be enough;
• Foam rubber to hide the central block;
• Insulating tape or adhesive tape (double-sided) for fixing sensors;
• socket wrench;
• adjustable wrench;
• Screwdriver (for dismantling panels);

The main way to protect the vehicle from unauthorized entry and theft is to install an alarm. The car market today offers a wide range of anti-theft systems of different brands. One of the most popular and in demand is the Mongoose alarm: the model line of this brand allows car owners to choose the system that is optimal in terms of functionality and features.

Features of car alarms "Mongoose"

The instructions for the Mongoose alarms indicate the features and capabilities common to all models:

1. Remote controls supplied remote control can be programmed by the user for specific system functions.
2. Almost all Mongoose alarm models are equipped with an anti-grabber option.
3. The alarm signal cannot be intercepted because the system is protected against pulse scanning.
4. Alarms with auto start "Mongoose" are equipped with the function of remembering user settings. The system retains all the settings made by the car owner even after a power reset and disconnection of the control unit from the battery. The configurations will only be reset if the Mongoose alarm is disabled by hacking and changing the mode.
5. All models of car alarms are equipped with a panic function.
6. All Mongoose are equipped with the function of automatic arming of the car.
7. For all models of the security system is relevant Valet mode.
8. With the help of a special channel, the car owner gets the opportunity to remotely control the lock and the security system.
9. The impulse of the central locking of the car is corrected and adjusted by the owner thanks to the alarm feedback.
10. The security complex saves the history of system activations. In the instructions for the Mongoose alarms, this function is noted, the essence of which is to remember any events that have occurred with the car. The system will notify the owner with several beeps.
11. You can turn off the "Mongoose" alarm both in one and in several stages, which is configured in the system settings.
12. Faulty components and systems of the car are detected by the security complex in automatic mode by turning them off. The car owner is notified about the shutdown of certain nodes.
13. The maximum number of sensor activations is 8. If this number is exceeded, the Mongoose alarm is temporarily disabled.

Key rings of car alarms "Mongoose"

One of distinguishing features and features is the alarm keychain "Mongoose". It is a classic radio transmitter powered by a standard battery. The body of the key fob is completely plastic, equipped with led lamp and three buttons. The key fob processor with 3 signaling buttons "Mongoose" is able to independently change the type of radio commands, which increases the level of cryptographic stability of the system. The LED is designed to notify the owner about the presence of a response to the commands given. When its brightness decreases, the key fob battery needs to be replaced. Security systems are usually supplied with two Mongoose key fobs with 2 buttons and 3 buttons. Both remotes perform similar functions, but one of them is usually equipped with a display.

Alarm Mongoose IQ 200

The youngest model in the Mongoose line of car alarms is the IQ 200, which is a trouble-free security system with high level cryptographic resistance and the highest and most effective anti-theft properties.

Mongoose IQ 200 has the following features:

• Passive immobilizer.
• High level of interference protection thanks to coding technology.
• Opening and closing the car with a PIN code.
• Silent mode of protection.
• Possibility of self-diagnosis of the system.
• Protecting the car with the engine running.
• Disarming a vehicle in two stages.
• Blocking of door and engine locks.
• Dual zone control allows you to connect two shock sensors.
• Pager synchronization.
• Ability to control the trunk mechanism.
• Locking windows when the security mode is activated.
• Ability to connect and configure an additional control channel.

Model Mongoose IQ 215

The older model of the alarm system "Mongoose" IQ 215 has advanced functionality and a high level of noise immunity. The list of system functions includes the following:

• Anti-scanner and anti-grabber.
• Silent security.
• Opening and closing the car with a PIN code.
• Control of the central lock with a key fob.
• Arming with the engine running.
• Possibility of remote control of the Valet mode.
• Improved anti-robbery mode.
• Self-diagnosis option and shutdown faulty zone.
• The elements of the control unit are powered by different sources.
• Dual zone control and two shock sensors.
• Blocking windows in the "protection" mode.
• The conclusion of the limit sensors of the trunk and doors.
• Locking door locks and car engine.
• Pager connection.
• Additional channels management.
• Automatic arming and re-arming.
• The ability to reset the settings to factory settings and reprogram all the key fobs that come with the kit.

Alarm "Mongoose" IQ 250

The wide functionality of the security system is similar previous model, however, the complex received several improved options:

• Emergency shutdown of the system using a PIN code.
• Additional connection to the car's stock horn.
• Control via key fob window regulators of the car.
• Radio command protection system based on KeeLoq technology.

All models listed are the same and include:

1. Control block.
2. Two key fobs with three and two buttons.
3. Valet service mode button.
4. Wire mounted LED indicator.
5. Relay blocking and control.
6. Impact sensors.
7. Main wiring and additional wires for connecting sensors.
8. Documentation: user manual, installation manual.

Car alarm Mongoose Duplex 2.1

Alarm Mongoose system Duplex 2.1 is intended for integrated protection vehicle. Notification is carried out in two ways: light and sound. The pager integrated into the key fob also receives a signal. The functionality and features of this alarm model do not allow anyone other than the car owner to start the car engine.

Duplex 2.1 standard functionality includes anti-scanning, storing events and system states in memory, and protecting the radio command code.

The attached instructions contain a detailed description of both the system options and the method of connecting the Mongoose alarm. An additional self-diagnosis option allows you to automatically find the faulty node and disable it.

Mongoose Duplex 2.2

Specifications, efficiency and affordable price allowed the Duplex 2.2 model for a short time conquer the market of car security systems. The alarm system of this model in terms of its functionality significantly exceeds the previous version - Duplex 2.1.

The two-way communication module has undergone significant changes, which improved the quality and reliability of the connection. The alarm delivery set includes control panels, shock sensors, a central control unit, a communication module and other elements.

As already mentioned, the alarm functionality of Mongoose Duplex 2.2 is impressive: in addition to the standard set of options, it includes a silent arming mode, a malfunction simulation and subsequent engine shutdown, an emergency shutdown, an antigrabber, automatic return to armed mode, a Valet service mode, informing about a malfunction separate zones protection, the presence of inputs for connecting sensors and limit switches for doors and trunk, blocking the battery.

"Mongoose Duplex 3D"

New model in the Mongoose-Duplex 3D alarm line, it combines all the advantages of its predecessors in a series of security systems with two-way communication.

In this model, the manufacturer managed to increase the quality of communication to the maximum, thanks to which a large number of car owners were attracted, who noted a similar level of reliability and connection quality in the Duplex Alarm model.

The alarm package consists of a key fob with a display and a two-channel communication system, a control unit, a shock sensor, a communication module, an emergency shutdown button, an LED indicator and a set of wires for installation.

The range of the system in the city has increased to 900 meters in the presence of radio interference.

Alarm Mongoose EMS 7.0

One of the most effective security systems for comprehensive vehicle protection is Mongoose EMS 7.0. The alarm functionality allows you to remotely start the car engine. The user is notified of all events by means of light and sound signals.

The pager integrated into the alarm key fob receives danger signals and other alerts from the control unit. It is impossible to start the car engine without the knowledge of the owner. Autostart of the engine greatly simplifies and facilitates the operation of the car: this function allows not only to activate the alarm, but also to start the power unit remotely.

The time and frequency of engine starts are programmed by the user. You can install an alarm on any vehicle, regardless of the type of installed transmission and engine.

A high level of crypto protection and a special radio command code prevent hacking of the system and attempts to intercept the code. The anti-scan function does not allow you to turn off the alarm by selecting a code. The function of storing system states does not allow hacking the car alarm by turning off the power and removing the terminals car battery. If this happens, the car will return to the previously set mode, accompanied by engine blocking.

Car alarm Mongoose EMS 1.7

Multifunctional security complex, the work of which is based on the multi-level protection of the car and the prevention of theft and unauthorized entry. Remote control of the car alarm is possible.

Disabling the alarm must be carried out with mandatory confirmation that this action has been performed by the owner of the vehicle. Otherwise, the security mode is re-enabled, and the corresponding message is sent to the key fob. Additional options systems allow you to program the alarm to automatically turn on and off at a set time.

Model Mongoose EMS 1.9

Car alarm system with the ability to remotely control the engine. This function allows you to start the engine at any time, which is very convenient in the cold season.

The main advantage of the Mongoose EMS 1.9 alarm is its connection diagram: installation can be carried out by the car owner on his own, without contacting service centers. The attached instructions describe in detail the process of connecting and configuring the alarm with the subsequent activation of the main and additional features.

Results

The model line of car alarms "Mongoose" is represented by a variety of models that have their own advantages and disadvantages and functionality. All presented alarm models are distinguished by a high level of cryptographic strength, affordable cost, wide functionality, ease and simplicity of installation, connection and subsequent configuration. The car owner can choose best option security complex at all necessary functions, which will provide high-quality and reliable protection of the vehicle for a long time.

Mongoose alarm is quite popular: this system combines such parameters as "price-quality" and at the same time guarantees safety, as well as 100% operation. But unlike the Starline signaling, with the Mongoose, not everyone understands how to operate and you need to look for the instruction manual. Do not hurry! We did it for you!

mongoose security system models

• AMG series (700, 700 plus, 700 super plus, Mongoose 750, 770, 800B, 800C, 800C/M, 850C;
• DX 1zone;
• ADD ON;
• Base Series (20, 30, 40, 50, 100, 200, 275, 300, 400, 475;
• Digital 100;
• Duplex Series (2.1, 2.2, 3D);
• EMS (1.7, 1.9, 7.0);
• Imperium 5000, 7000;
• Cyborg;
• matrix;
• next;
• QS, QS Lux;
• RKT 07S, 09S, 11S;
• TT-1, TT-2;
• mongoose two way;
• Immobiliz.

Each model comes with its own instructions, and although the principle of operation is similar everywhere, there are still differences for specific models.

Signaling capabilities

Check out the main features and capabilities of Mongoose car alarms.

• Code protection . Attackers will not be able to intercept the signal: KeeLoq technology is used. It is used by the Mongoose developers as base component protecting against theft. Other manufacturers use a similar principle, but two more options are implemented in Mongoose systems - as an addition.
• Antiscan. The option is integrated into the system initially, it does not need to be installed. Its task is to prevent the risk of code selection. This is usually done by sequential elimination of false operations. If an attacker sets the task of finding the right combination, nothing will come of it
• Memory . If we assume that the offender decides to physically eliminate the problem of access to the car and remove the terminals from the battery, the security mode will not turn off, the engine will remain unstarted, and an alarm will sound.

The main functionalities of the Mongoose trademark alarm are:

• quiet security- alerts come in the form of light signals and user alerts;
• delayed guard- protection is activated only after closing the doors, including the trunk;
• autostart of the motor- parameters are set at which the engine is switched on (temperature, time);
• Anti Hi Jack. Blocking the motor while driving (when you try to steal a car, the mode is activated from the key fob;
• emergency shutdown- the protection from the PIN-code is removed.

The principle of operation of the Mongoose alarm

Management is carried out using a key fob. The alarm is triggered by a radio transmitter powered by 12V batteries - the service life is about 12 months. There are 2 buttons and an LED on the case. If you click on any of the controls, a signal is sent. The key fob feature is a built-in processor capable of changing radio commands according to a specially developed anti-theft algorithm. Therefore, an attacker will not be able to intercept the signal.

The LED responds to commands, signals the need to replace the battery (brightness changes). IN standard equipment alarm 2 key fobs frequency 433.92 mhz that work in the same way.

How the indicator works:

• blinking - successful blocking of the car;
• continuous light - Valet mode activation;
• no light - car alarm Mongoose off;
• short flash - auto-arm delay;
• a series of flashes - 2 (shock worked), 3 (opening doors), 4 (opening the hood / trunk);
• slow flash - response to ignition.

Instructions for use

The rules for using the device are simple, detailed instruction:

• pressing the book one- a siren signal is heard, the headlights flash, the doors are locked, the engine block is turned on;
• unlocking and disarming is also performed by pressing the button. one;
• holding book. 2 within 3 seconds triggers additional output alarms: trunk lock and other electrical devices are controlled;
• auto arming works after turning off the engine and closing the doors after 30 seconds, but it must be programmed in advance;
• you can protect the key fob from accidental clicks: given 30 sec. to open the doors, if this did not happen, the doors will be blocked again.

This scheme of operation is used on Mongoose 750 and other devices. Please read the individual instructions for signaling Mongoose firms to understand the functions and capabilities, to properly configure the system.

Setting up Mongoose alarm

brand alarm configured as follows:

1. The ignition is switched on, after 5 seconds. you need to press Valet. 2 short, 1 light signals are emitted.
2. Press the book. 1. You will hear 2 short beeps, then 1 more - as a confirmation of the activation of the remote control.
3. The 1st action is repeated for each key fob. There are up to 4 remote controls included.
4. wait 10 sec. The system will exit the programming mode - the alarm can be used.

Before setting up the device, you need correct installation. Wiring diagram car alarm The company is simple only for a professional, but an ordinary car owner can do this with sufficient experience.

Mongoose AMG 700 key fob conversion (video):

Alarm connection diagram

The device is installed in accordance with the algorithm:

1. installation of a siren, sensors, receiver, control unit;
2. connection with wires;
3. connection to the main electrical elements - power windows, lock, headlights, turning lights;
4. testing is being performed.

Wiring diagram clearly shown in Fig.

Installing an alarm on the VAZ 2110 (video):

Designation of badges on the keychain

Each device has its own control panel. Alarm Mongoose 600, for example, has 2 buttons (lock / unlock). They correspond to icons with an open and closed lock. They may have a different look - on and off signs.

Assignment of the buttons on the main key fob

Alarm brand mongoose 750 and some other models has 2 buttons - arming/disarming. Other models may have up to 5 buttons. They provide unlocking the trunk and other functions - depending on the device.

Instruction attached to signaling with key fob frequency 433 mhz - required reading. This will help ensure security and eliminate the risk of unlocking due to the inexperience of the car owner.